From 0ba96b344a7fbc6750459ba3b619053850867a2c Mon Sep 17 00:00:00 2001 From: "周琰杰 (Zhou Yanjie)" Date: Wed, 15 Jan 2020 01:03:47 +0800 Subject: MIPS: Ingenic: Add missing nodes for X1000 and CU1000-Neo. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add I2C0/I2C1/I2C2 nodes for X1000 and add I2C0, ADS7830, MSC1, AP6212A, wlan_pwrseq nodes for CU1000-Neo. Signed-off-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: robh+dt@kernel.org Cc: paul.burton@mips.com Cc: jhogan@kernel.org Cc: mark.rutland@arm.com Cc: syq@debian.org Cc: ralf@linux-mips.org Cc: rick.tyliu@ingenic.com Cc: jason@lakedaemon.net Cc: keescook@chromium.org Cc: geert+renesas@glider.be Cc: krzk@kernel.org Cc: paul@crapouillou.net Cc: prasannatsmkumar@gmail.com Cc: sernia.zhou@foxmail.com Cc: zhenwenjin@gmail.com Cc: ebiederm@xmission.com --- arch/mips/boot/dts/ingenic/cu1000-neo.dts | 71 +++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) (limited to 'arch/mips/boot/dts/ingenic/cu1000-neo.dts') diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts index b0733da9b8d3..03abd94acd84 100644 --- a/arch/mips/boot/dts/ingenic/cu1000-neo.dts +++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts @@ -4,6 +4,7 @@ #include "x1000.dtsi" #include #include +#include / { compatible = "yna,cu1000-neo", "ingenic,x1000"; @@ -21,6 +22,22 @@ device_type = "memory"; reg = <0x0 0x04000000>; }; + + wlan_pwrseq: msc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&lpoclk>; + clock-names = "ext_clock"; + + reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + + lpoclk: ap6212a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; &exclk { @@ -36,6 +53,20 @@ ingenic,pwm-channels-mask = <0xfa>; }; +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + ads7830@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pins_uart2>; @@ -78,7 +109,41 @@ status = "okay"; }; +&msc1 { + bus-width = <4>; + max-frequency = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_msc1>; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + + mmc-pwrseq = <&wlan_pwrseq>; + + status = "okay"; + + ap6212a: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpc>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + brcm,drive-strength = <10>; + }; +}; + &pinctrl { + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-disable; + }; + pins_uart2: uart2 { function = "uart2"; groups = "uart2-data-d"; @@ -96,4 +161,10 @@ groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit"; bias-disable; }; + + pins_msc1: msc1 { + function = "mmc1"; + groups = "mmc1-1bit", "mmc1-4bit"; + bias-disable; + }; }; -- cgit