From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/mips/kernel/r2300_switch.S | 174 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 arch/mips/kernel/r2300_switch.S (limited to 'arch/mips/kernel/r2300_switch.S') diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S new file mode 100644 index 000000000000..243e7b629af6 --- /dev/null +++ b/arch/mips/kernel/r2300_switch.S @@ -0,0 +1,174 @@ +/* + * r2300_switch.S: R2300 specific task switching code. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + * Copyright (C) 1994, 1995, 1996 by Andreas Busse + * + * Multi-cpu abstraction and macros for easier reading: + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * + * Further modifications to make this work: + * Copyright (c) 1998-2000 Harald Koerfgen + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + .set mips1 + .align 5 + +/* + * Offset to the current process status flags, the first 32 bytes of the + * stack are not used. + */ +#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS) + +/* + * FPU context is saved iff the process has used it's FPU in the current + * time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user + * space STATUS register should be 0, so that a process *always* starts its + * userland with FPU disabled after each context switch. + * + * FPU will be enabled as soon as the process accesses FPU again, through + * do_cpu() trap. + */ + +/* + * task_struct *resume(task_struct *prev, task_struct *next, + * struct thread_info *next_ti) ) + */ +LEAF(resume) +#ifndef CONFIG_CPU_HAS_LLSC + sw zero, ll_bit +#endif + mfc0 t1, CP0_STATUS + sw t1, THREAD_STATUS(a0) + cpu_save_nonscratch a0 + sw ra, THREAD_REG31(a0) + + /* + * check if we need to save FPU registers + */ + lw t3, TASK_THREAD_INFO(a0) + lw t0, TI_FLAGS(t3) + li t1, _TIF_USEDFPU + and t2, t0, t1 + beqz t2, 1f + nor t1, zero, t1 + + and t0, t0, t1 + sw t0, TI_FLAGS(t3) + + /* + * clear saved user stack CU1 bit + */ + lw t0, ST_OFF(t3) + li t1, ~ST0_CU1 + and t0, t0, t1 + sw t0, ST_OFF(t3) + + fpu_save_single a0, t0 # clobbers t0 + +1: + /* + * The order of restoring the registers takes care of the race + * updating $28, $29 and kernelsp without disabling ints. + */ + move $28, a2 + cpu_restore_nonscratch a1 + + addiu t1, $28, _THREAD_SIZE - 32 + sw t1, kernelsp + + mfc0 t1, CP0_STATUS /* Do we really need this? */ + li a3, 0xff01 + and t1, a3 + lw a2, THREAD_STATUS(a1) + nor a3, $0, a3 + and a2, a3 + or a2, t1 + mtc0 a2, CP0_STATUS + move v0, a0 + jr ra + END(resume) + +/* + * Save a thread's fp context. + */ +LEAF(_save_fp) + fpu_save_single a0, t1 # clobbers t1 + jr ra + END(_save_fp) + +/* + * Restore a thread's fp context. + */ +LEAF(_restore_fp) + fpu_restore_single a0, t1 # clobbers t1 + jr ra + END(_restore_fp) + +/* + * Load the FPU with signalling NANS. This bit pattern we're using has + * the property that no matter whether considered as single or as double + * precision represents signaling NANS. + * + * We initialize fcr31 to rounding to nearest, no exceptions. + */ + +#define FPU_DEFAULT 0x00000000 + +LEAF(_init_fpu) + mfc0 t0, CP0_STATUS + li t1, ST0_CU1 + or t0, t1 + mtc0 t0, CP0_STATUS + + li t1, FPU_DEFAULT + ctc1 t1, fcr31 + + li t0, -1 + + mtc1 t0, $f0 + mtc1 t0, $f1 + mtc1 t0, $f2 + mtc1 t0, $f3 + mtc1 t0, $f4 + mtc1 t0, $f5 + mtc1 t0, $f6 + mtc1 t0, $f7 + mtc1 t0, $f8 + mtc1 t0, $f9 + mtc1 t0, $f10 + mtc1 t0, $f11 + mtc1 t0, $f12 + mtc1 t0, $f13 + mtc1 t0, $f14 + mtc1 t0, $f15 + mtc1 t0, $f16 + mtc1 t0, $f17 + mtc1 t0, $f18 + mtc1 t0, $f19 + mtc1 t0, $f20 + mtc1 t0, $f21 + mtc1 t0, $f22 + mtc1 t0, $f23 + mtc1 t0, $f24 + mtc1 t0, $f25 + mtc1 t0, $f26 + mtc1 t0, $f27 + mtc1 t0, $f28 + mtc1 t0, $f29 + mtc1 t0, $f30 + mtc1 t0, $f31 + jr ra + END(_init_fpu) -- cgit