From 86c6d4d0acc64543a485c11e197d0bd2c5ae0bb2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 5 Aug 2010 13:25:55 +0100 Subject: MIPS: PNX833x: Move code one directory level up. It was sharing the nxp directory but no code with pnx8550 and will fit better into the new platform makefile scheme, if moved. Signed-off-by: Ralf Baechle --- arch/mips/pnx833x/common/Makefile | 3 + arch/mips/pnx833x/common/interrupts.c | 379 ++++++++++++++++++++++++++++++++++ arch/mips/pnx833x/common/platform.c | 319 ++++++++++++++++++++++++++++ arch/mips/pnx833x/common/prom.c | 64 ++++++ arch/mips/pnx833x/common/reset.c | 44 ++++ arch/mips/pnx833x/common/setup.c | 64 ++++++ arch/mips/pnx833x/stb22x/Makefile | 3 + arch/mips/pnx833x/stb22x/board.c | 133 ++++++++++++ 8 files changed, 1009 insertions(+) create mode 100644 arch/mips/pnx833x/common/Makefile create mode 100644 arch/mips/pnx833x/common/interrupts.c create mode 100644 arch/mips/pnx833x/common/platform.c create mode 100644 arch/mips/pnx833x/common/prom.c create mode 100644 arch/mips/pnx833x/common/reset.c create mode 100644 arch/mips/pnx833x/common/setup.c create mode 100644 arch/mips/pnx833x/stb22x/Makefile create mode 100644 arch/mips/pnx833x/stb22x/board.c (limited to 'arch/mips/pnx833x') diff --git a/arch/mips/pnx833x/common/Makefile b/arch/mips/pnx833x/common/Makefile new file mode 100644 index 000000000000..4a16f3b503b5 --- /dev/null +++ b/arch/mips/pnx833x/common/Makefile @@ -0,0 +1,3 @@ +obj-y := interrupts.o platform.o prom.o setup.o reset.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/pnx833x/common/interrupts.c b/arch/mips/pnx833x/common/interrupts.c new file mode 100644 index 000000000000..941916f8aaff --- /dev/null +++ b/arch/mips/pnx833x/common/interrupts.c @@ -0,0 +1,379 @@ +/* + * interrupts.c: Interrupt mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel + * Daniel Laird + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int mips_cpu_timer_irq; + +static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] = +{ + 0, /* unused */ + 4, /* PNX833X_PIC_I2C0_INT 1 */ + 4, /* PNX833X_PIC_I2C1_INT 2 */ + 1, /* PNX833X_PIC_UART0_INT 3 */ + 1, /* PNX833X_PIC_UART1_INT 4 */ + 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ + 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ + 7, /* PNX833X_PIC_GPIO_INT 7 */ + 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ + 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ + 4, /* PNX833X_PIC_CONFIG_INT 10 */ + 4, /* PNX833X_PIC_AOI_INT 11 */ + 9, /* PNX833X_PIC_SYNC_INT 12 */ + 9, /* PNX8335_PIC_SATA_INT 13 */ + 4, /* PNX833X_PIC_OSD_INT 14 */ + 9, /* PNX833X_PIC_DISP1_INT 15 */ + 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ + 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ + 4, /* PNX833X_PIC_VC_INT 18 */ + 4, /* PNX833X_PIC_SC_INT 19 */ + 9, /* PNX833X_PIC_IDE_INT 20 */ + 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ + 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ + 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ + 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ + 4, /* PNX833X_PIC_TS_OUT_INT 25 */ + 4, /* PNX833X_PIC_IR_INT 26 */ + 3, /* PNX833X_PIC_VMSP1_INT 27 */ + 3, /* PNX833X_PIC_VMSP2_INT 28 */ + 4, /* PNX833X_PIC_PIBC_INT 29 */ + 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ + 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ + 5, /* PNX833X_PIC_USB_INT 32 */ + 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ + 4, /* PNX833X_PIC_CLOCK_INT 34 */ + 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ + 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ +#if defined(CONFIG_SOC_PNX8335) + 4, /* PNX8335_PIC_MIU_INT 37 */ + 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ + 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ + 9, /* PNX8335_PIC_DISP_HD_INT 40 */ + 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ + 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ + 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ + 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ + 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */ + 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */ + 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ + 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ + 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ + 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ + 4, /* PNX8335_PIC_PIBCS_INT 51 */ + 12, /* PNX8335_PIC_ETHERNET_INT 52 */ + 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ + 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ + 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ + 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ + 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ +#endif +}; + +static void pnx833x_timer_dispatch(void) +{ + do_IRQ(mips_cpu_timer_irq); +} + +static void pic_dispatch(void) +{ + unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC); + + if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) { + unsigned long priority = PNX833X_PIC_INT_PRIORITY; + PNX833X_PIC_INT_PRIORITY = irq_prio[irq]; + + if (irq == PNX833X_PIC_GPIO_INT) { + unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE; + int pin; + while ((pin = ffs(mask & 0xffff))) { + pin -= 1; + do_IRQ(PNX833X_GPIO_IRQ_BASE + pin); + mask &= ~(1 << pin); + } + } else { + do_IRQ(irq + PNX833X_PIC_IRQ_BASE); + } + + PNX833X_PIC_INT_PRIORITY = priority; + } else { + printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP4) + pic_dispatch(); + else if (pending & STATUSF_IP7) + do_IRQ(PNX833X_TIMER_IRQ); + else + spurious_interrupt(); +} + +static inline void pnx833x_hard_enable_pic_irq(unsigned int irq) +{ + /* Currently we do this by setting IRQ priority to 1. + If priority support is being implemented, 1 should be repalced + by a better value. */ + PNX833X_PIC_INT_REG(irq) = irq_prio[irq]; +} + +static inline void pnx833x_hard_disable_pic_irq(unsigned int irq) +{ + /* Disable IRQ by writing setting it's priority to 0 */ + PNX833X_PIC_INT_REG(irq) = 0; +} + +static int irqflags[PNX833X_PIC_NUM_IRQ]; /* initialized by zeroes */ +#define IRQFLAG_STARTED 1 +#define IRQFLAG_DISABLED 2 + +static DEFINE_RAW_SPINLOCK(pnx833x_irq_lock); + +static unsigned int pnx833x_startup_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */ + pnx833x_hard_enable_pic_irq(pic_irq); + + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + return 0; +} + +static void pnx833x_shutdown_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] = 0; /* not started */ + pnx833x_hard_disable_pic_irq(pic_irq); + + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_enable_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] &= ~IRQFLAG_DISABLED; + if (irqflags[pic_irq] == IRQFLAG_STARTED) + pnx833x_hard_enable_pic_irq(pic_irq); + + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_disable_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] |= IRQFLAG_DISABLED; + pnx833x_hard_disable_pic_irq(pic_irq); + + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_ack_pic_irq(unsigned int irq) +{ +} + +static void pnx833x_end_pic_irq(unsigned int irq) +{ +} + +static DEFINE_RAW_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); + +static unsigned int pnx833x_startup_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_enable_irq(pin); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + return 0; +} + +static void pnx833x_enable_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_enable_irq(pin); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static void pnx833x_disable_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_disable_irq(pin); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static void pnx833x_ack_gpio_irq(unsigned int irq) +{ +} + +static void pnx833x_end_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_clear_irq(pin); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + int gpio_mode; + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + gpio_mode = GPIO_INT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_mode = GPIO_INT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + gpio_mode = GPIO_INT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_mode = GPIO_INT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_mode = GPIO_INT_LEVEL_LOW; + break; + default: + gpio_mode = GPIO_INT_NONE; + break; + } + + pnx833x_gpio_setup_irq(gpio_mode, pin); + + return 0; +} + +static struct irq_chip pnx833x_pic_irq_type = { + .name = "PNX-PIC", + .startup = pnx833x_startup_pic_irq, + .shutdown = pnx833x_shutdown_pic_irq, + .enable = pnx833x_enable_pic_irq, + .disable = pnx833x_disable_pic_irq, + .ack = pnx833x_ack_pic_irq, + .end = pnx833x_end_pic_irq +}; + +static struct irq_chip pnx833x_gpio_irq_type = { + .name = "PNX-GPIO", + .startup = pnx833x_startup_gpio_irq, + .shutdown = pnx833x_disable_gpio_irq, + .enable = pnx833x_enable_gpio_irq, + .disable = pnx833x_disable_gpio_irq, + .ack = pnx833x_ack_gpio_irq, + .end = pnx833x_end_gpio_irq, + .set_type = pnx833x_set_type_gpio_irq +}; + +void __init arch_init_irq(void) +{ + unsigned int irq; + + /* setup standard internal cpu irqs */ + mips_cpu_irq_init(); + + /* Set IRQ information in irq_desc */ + for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) { + pnx833x_hard_disable_pic_irq(irq); + set_irq_chip_and_handler(irq, &pnx833x_pic_irq_type, handle_simple_irq); + } + + for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++) + set_irq_chip_and_handler(irq, &pnx833x_gpio_irq_type, handle_simple_irq); + + /* Set PIC priority limiter register to 0 */ + PNX833X_PIC_INT_PRIORITY = 0; + + /* Setup GPIO IRQ dispatching */ + pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT); + + /* Enable PIC IRQs (HWIRQ2) */ + if (cpu_has_vint) + set_vi_handler(4, pic_dispatch); + + write_c0_status(read_c0_status() | IE_IRQ2); +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ + if (cpu_has_vint) + set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch); + + mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + return mips_cpu_timer_irq; +} + +void __init plat_time_init(void) +{ + /* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */ + + extern unsigned long mips_hpt_frequency; + unsigned long reg = PNX833X_CLOCK_CPUCP_CTL; + + if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) { + /* Functional clock is disabled so use crystal frequency */ + mips_hpt_frequency = 25; + } else { +#if defined(CONFIG_SOC_PNX8335) + /* Functional clock is enabled, so get clock multiplier */ + mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ)); +#else + static const unsigned long int freq[4] = {240, 160, 120, 80}; + mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)]; +#endif + } + + printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency); + + mips_hpt_frequency *= 500000; +} diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c new file mode 100644 index 000000000000..01f8345a2069 --- /dev/null +++ b/arch/mips/pnx833x/common/platform.c @@ -0,0 +1,319 @@ +/* + * platform.c: platform support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel + * Daniel Laird + * + * Based on software written by: + * Nikita Youshchenko , based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_I2C_PNX0105 +/* Until i2c driver available in kernel.*/ +#include +#endif + +#include +#include +#include + +static u64 uart_dmamask = DMA_BIT_MASK(32); + +static struct resource pnx833x_uart_resources[] = { + [0] = { + .start = PNX833X_UART0_PORTS_START, + .end = PNX833X_UART0_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX833X_PIC_UART0_INT, + .end = PNX833X_PIC_UART0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = PNX833X_UART1_PORTS_START, + .end = PNX833X_UART1_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = PNX833X_PIC_UART1_INT, + .end = PNX833X_PIC_UART1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct pnx8xxx_port pnx8xxx_ports[] = { + [0] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX833X_UART0_PORTS_START, + .mapbase = PNX833X_UART0_PORTS_START, + .irq = PNX833X_PIC_UART0_INT, + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX833X_UART1_PORTS_START, + .mapbase = PNX833X_UART1_PORTS_START, + .irq = PNX833X_PIC_UART1_INT, + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, +}; + +static struct platform_device pnx833x_uart_device = { + .name = "pnx8xxx-uart", + .id = -1, + .dev = { + .dma_mask = &uart_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = pnx8xxx_ports, + }, + .num_resources = ARRAY_SIZE(pnx833x_uart_resources), + .resource = pnx833x_uart_resources, +}; + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +static struct resource pnx833x_usb_ehci_resources[] = { + [0] = { + .start = PNX833X_USB_PORTS_START, + .end = PNX833X_USB_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX833X_PIC_USB_INT, + .end = PNX833X_PIC_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_usb_ehci_device = { + .name = "pnx833x-ehci", + .id = -1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), + .resource = pnx833x_usb_ehci_resources, +}; + +#ifdef CONFIG_I2C_PNX0105 +static struct resource pnx833x_i2c0_resources[] = { + { + .start = PNX833X_I2C0_PORTS_START, + .end = PNX833X_I2C0_PORTS_END, + .flags = IORESOURCE_MEM, + }, + { + .start = PNX833X_PIC_I2C0_INT, + .end = PNX833X_PIC_I2C0_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource pnx833x_i2c1_resources[] = { + { + .start = PNX833X_I2C1_PORTS_START, + .end = PNX833X_I2C1_PORTS_END, + .flags = IORESOURCE_MEM, + }, + { + .start = PNX833X_PIC_I2C1_INT, + .end = PNX833X_PIC_I2C1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { + { + .base = PNX833X_I2C0_PORTS_START, + .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ + .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ + .bus_addr = 0, /* no slave support */ + }, + { + .base = PNX833X_I2C1_PORTS_START, + .irq = -1, /* on high freq, polling is faster */ + /*.irq = PNX833X_PIC_I2C1_INT,*/ + .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ + .bus_addr = 0, /* no slave support */ + }, +}; + +static struct platform_device pnx833x_i2c0_device = { + .name = "i2c-pnx0105", + .id = 0, + .dev = { + .platform_data = &pnx833x_i2c_dev[0], + }, + .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), + .resource = pnx833x_i2c0_resources, +}; + +static struct platform_device pnx833x_i2c1_device = { + .name = "i2c-pnx0105", + .id = 1, + .dev = { + .platform_data = &pnx833x_i2c_dev[1], + }, + .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), + .resource = pnx833x_i2c1_resources, +}; +#endif + +static u64 ethernet_dmamask = DMA_BIT_MASK(32); + +static struct resource pnx833x_ethernet_resources[] = { + [0] = { + .start = PNX8335_IP3902_PORTS_START, + .end = PNX8335_IP3902_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8335_PIC_ETHERNET_INT, + .end = PNX8335_PIC_ETHERNET_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_ethernet_device = { + .name = "ip3902-eth", + .id = -1, + .dev = { + .dma_mask = ðernet_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), + .resource = pnx833x_ethernet_resources, +}; + +static struct resource pnx833x_sata_resources[] = { + [0] = { + .start = PNX8335_SATA_PORTS_START, + .end = PNX8335_SATA_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8335_PIC_SATA_INT, + .end = PNX8335_PIC_SATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_sata_device = { + .name = "pnx833x-sata", + .id = -1, + .num_resources = ARRAY_SIZE(pnx833x_sata_resources), + .resource = pnx833x_sata_resources, +}; + +static const char *part_probes[] = { + "cmdlinepart", + NULL +}; + +static void +pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK)); + else + writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK)); +} + +static struct platform_nand_data pnx833x_flash_nand_data = { + .chip = { + .chip_delay = 25, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl + } +}; + +/* + * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!), + * 12 bytes more seems to be the standard that allows for NAND access. + */ +static struct resource pnx833x_flash_nand_resource = { + .start = PNX8335_NAND_BASE, + .end = PNX8335_NAND_BASE + 12, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pnx833x_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &pnx833x_flash_nand_resource, + .dev = { + .platform_data = &pnx833x_flash_nand_data, + }, +}; + +static struct platform_device *pnx833x_platform_devices[] __initdata = { + &pnx833x_uart_device, + &pnx833x_usb_ehci_device, +#ifdef CONFIG_I2C_PNX0105 + &pnx833x_i2c0_device, + &pnx833x_i2c1_device, +#endif + &pnx833x_ethernet_device, + &pnx833x_sata_device, + &pnx833x_flash_nand, +}; + +static int __init pnx833x_platform_init(void) +{ + int res; + + res = platform_add_devices(pnx833x_platform_devices, + ARRAY_SIZE(pnx833x_platform_devices)); + + return res; +} + +arch_initcall(pnx833x_platform_init); diff --git a/arch/mips/pnx833x/common/prom.c b/arch/mips/pnx833x/common/prom.c new file mode 100644 index 000000000000..29969f90a6b0 --- /dev/null +++ b/arch/mips/pnx833x/common/prom.c @@ -0,0 +1,64 @@ +/* + * prom.c: + * + * Copyright 2008 NXP Semiconductors + * Chris Steel + * Daniel Laird + * + * Based on software written by: + * Nikita Youshchenko , based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include + +void __init prom_init_cmdline(void) +{ + int argc = fw_arg0; + char **argv = (char **)fw_arg1; + char *c = &(arcs_cmdline[0]); + int i; + + for (i = 1; i < argc; i++) { + strcpy(c, argv[i]); + c += strlen(argv[i]); + if (i < argc-1) + *c++ = ' '; + } + *c = 0; +} + +char __init *prom_getenv(char *envname) +{ + extern char **prom_envp; + char **env = prom_envp; + int i; + + i = strlen(envname); + + while (*env) { + if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=') + return *env + i + 1; + env++; + } + + return 0; +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/pnx833x/common/reset.c b/arch/mips/pnx833x/common/reset.c new file mode 100644 index 000000000000..e0ea96d29fde --- /dev/null +++ b/arch/mips/pnx833x/common/reset.c @@ -0,0 +1,44 @@ +/* + * reset.c: reset support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel + * Daniel Laird + * + * Based on software written by: + * Nikita Youshchenko , based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include + +void pnx833x_machine_restart(char *command) +{ + PNX833X_RESET_CONTROL_2 = 0; + PNX833X_RESET_CONTROL = 0; +} + +void pnx833x_machine_halt(void) +{ + while (1) + __asm__ __volatile__ ("wait"); + +} + +void pnx833x_machine_power_off(void) +{ + pnx833x_machine_halt(); +} diff --git a/arch/mips/pnx833x/common/setup.c b/arch/mips/pnx833x/common/setup.c new file mode 100644 index 000000000000..e51fbc4b644d --- /dev/null +++ b/arch/mips/pnx833x/common/setup.c @@ -0,0 +1,64 @@ +/* + * setup.c: Setup PNX833X Soc. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel + * Daniel Laird + * + * Based on software written by: + * Nikita Youshchenko , based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +extern void pnx833x_board_setup(void); +extern void pnx833x_machine_restart(char *); +extern void pnx833x_machine_halt(void); +extern void pnx833x_machine_power_off(void); + +int __init plat_mem_setup(void) +{ + /* fake pci bus to avoid bounce buffers */ + PCI_DMA_BUS_IS_PHYS = 1; + + /* set mips clock to 320MHz */ +#if defined(CONFIG_SOC_PNX8335) + PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ); +#endif + pnx833x_gpio_init(); /* so it will be ready in board_setup() */ + + pnx833x_board_setup(); + + _machine_restart = pnx833x_machine_restart; + _machine_halt = pnx833x_machine_halt; + pm_power_off = pnx833x_machine_power_off; + + /* IO/MEM resources. */ + set_io_port_base(KSEG1); + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + return 0; +} diff --git a/arch/mips/pnx833x/stb22x/Makefile b/arch/mips/pnx833x/stb22x/Makefile new file mode 100644 index 000000000000..f81c5801f455 --- /dev/null +++ b/arch/mips/pnx833x/stb22x/Makefile @@ -0,0 +1,3 @@ +lib-y := board.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c new file mode 100644 index 000000000000..644eb7c3210f --- /dev/null +++ b/arch/mips/pnx833x/stb22x/board.c @@ -0,0 +1,133 @@ +/* + * board.c: STB225 board support. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel + * Daniel Laird + * + * Based on software written by: + * Nikita Youshchenko , based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include + +/* endianess twiddlers */ +#define PNX8335_DEBUG0 0x4400 +#define PNX8335_DEBUG1 0x4404 +#define PNX8335_DEBUG2 0x4408 +#define PNX8335_DEBUG3 0x440c +#define PNX8335_DEBUG4 0x4410 +#define PNX8335_DEBUG5 0x4414 +#define PNX8335_DEBUG6 0x4418 +#define PNX8335_DEBUG7 0x441c + +int prom_argc; +char **prom_argv, **prom_envp; + +extern void prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP STB22x"; +} + +static inline unsigned long env_or_default(char *env, unsigned long dfl) +{ + char *str = prom_getenv(env); + return str ? simple_strtol(str, 0, 0) : dfl; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize = env_or_default("memsize", 0x02000000); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void __init pnx833x_board_setup(void) +{ + pnx833x_gpio_select_function_alt(4); + pnx833x_gpio_select_output(4); + pnx833x_gpio_select_function_alt(5); + pnx833x_gpio_select_input(5); + pnx833x_gpio_select_function_alt(6); + pnx833x_gpio_select_input(6); + pnx833x_gpio_select_function_alt(7); + pnx833x_gpio_select_output(7); + + pnx833x_gpio_select_function_alt(25); + pnx833x_gpio_select_function_alt(26); + + pnx833x_gpio_select_function_alt(27); + pnx833x_gpio_select_function_alt(28); + pnx833x_gpio_select_function_alt(29); + pnx833x_gpio_select_function_alt(30); + pnx833x_gpio_select_function_alt(31); + pnx833x_gpio_select_function_alt(32); + pnx833x_gpio_select_function_alt(33); + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + /* Setup MIU for NAND access on CS0... + * + * (it seems that we must also configure CS1 for reliable operation, + * otherwise the first read ID command will fail if it's read as 4 bytes + * but pass if it's read as 1 word.) + */ + + /* Setup MIU CS0 & CS1 timing */ + PNX833X_MIU_SEL0 = 0; + PNX833X_MIU_SEL1 = 0; + PNX833X_MIU_SEL0_TIMING = 0x50003081; + PNX833X_MIU_SEL1_TIMING = 0x50003081; + + /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ + pnx833x_gpio_select_function_alt(0); + + /* Setup GPIO 04 to input NAND read/busy signal */ + pnx833x_gpio_select_function_io(4); + pnx833x_gpio_select_input(4); + + /* Setup GPIO 05 to disable NAND write protect */ + pnx833x_gpio_select_function_io(5); + pnx833x_gpio_select_output(5); + pnx833x_gpio_write(1, 5); + +#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE) + + /* Set up MIU for 16-bit NOR access on CS0 and CS1... */ + + /* Setup MIU CS0 & CS1 timing */ + PNX833X_MIU_SEL0 = 1; + PNX833X_MIU_SEL1 = 1; + PNX833X_MIU_SEL0_TIMING = 0x6A08D082; + PNX833X_MIU_SEL1_TIMING = 0x6A08D082; + + /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ + pnx833x_gpio_select_function_alt(0); +#endif +} -- cgit