From e7513eccb7d7f82e28f4730210b42da71edaa6a6 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Sun, 27 Aug 2023 16:36:59 +0300 Subject: MIPS: TXx9: Do PCI error checks on own line MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of if conditions with line splits, use the usual error handling pattern with a separate variable to improve readability. The second check can use reverse logic which reduces indentation level. No functional changes intended. Signed-off-by: Ilpo Järvinen Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer --- arch/mips/txx9/generic/pci.c | 43 +++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 20 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index e98845543b77..5ae30b78d38d 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -51,6 +51,7 @@ int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, unsigned short vid; int cap66 = -1; u16 stat; + int ret; /* It seems SLC90E66 needs some time after PCI reset... */ mdelay(80); @@ -60,9 +61,9 @@ int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { if (PCI_FUNC(pci_devfn)) continue; - if (early_read_config_word(hose, top_bus, current_bus, - pci_devfn, PCI_VENDOR_ID, &vid) != - PCIBIOS_SUCCESSFUL) + ret = early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_VENDOR_ID, &vid); + if (ret != PCIBIOS_SUCCESSFUL) continue; if (vid == 0xffff) continue; @@ -343,26 +344,28 @@ static void tc35815_fixup(struct pci_dev *dev) static void final_fixup(struct pci_dev *dev) { + unsigned long timeout; unsigned char bist; + int ret; /* Do build-in self test */ - if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL && - (bist & PCI_BIST_CAPABLE)) { - unsigned long timeout; - pci_set_power_state(dev, PCI_D0); - pr_info("PCI: %s BIST...", pci_name(dev)); - pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); - timeout = jiffies + HZ * 2; /* timeout after 2 sec */ - do { - pci_read_config_byte(dev, PCI_BIST, &bist); - if (time_after(jiffies, timeout)) - break; - } while (bist & PCI_BIST_START); - if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) - pr_cont("failed. (0x%x)\n", bist); - else - pr_cont("OK.\n"); - } + ret = pci_read_config_byte(dev, PCI_BIST, &bist); + if ((ret != PCIBIOS_SUCCESSFUL) || !(bist & PCI_BIST_CAPABLE)) + return; + + pci_set_power_state(dev, PCI_D0); + pr_info("PCI: %s BIST...", pci_name(dev)); + pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); + timeout = jiffies + HZ * 2; /* timeout after 2 sec */ + do { + pci_read_config_byte(dev, PCI_BIST, &bist); + if (time_after(jiffies, timeout)) + break; + } while (bist & PCI_BIST_START); + if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) + pr_cont("failed. (0x%x)\n", bist); + else + pr_cont("OK.\n"); } #ifdef CONFIG_TOSHIBA_FPCIB0 -- cgit