From df34403dcaacef541a67c955aebc37c51f53ca7c Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:41:42 +0300 Subject: [POWERPC] 8xx: Add mpc885ads support and common mpc8xx files This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/8xx/m8xx_setup.c | 303 ++++++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 arch/powerpc/platforms/8xx/m8xx_setup.c (limited to 'arch/powerpc/platforms/8xx/m8xx_setup.c') diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c new file mode 100644 index 000000000000..9ed7125f0150 --- /dev/null +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net) + * Further modified for generic 8xx by Dan. + */ + +/* + * bootup setup stuff.. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sysdev/mpc8xx_pic.h" + +void m8xx_calibrate_decr(void); +extern void m8xx_wdt_handler_install(bd_t *bp); +extern int cpm_pic_init(void); +extern int cpm_get_irq(void); + +/* A place holder for time base interrupts, if they are ever enabled. */ +irqreturn_t timebase_interrupt(int irq, void * dev) +{ + printk ("timebase_interrupt()\n"); + + return IRQ_HANDLED; +} + +static struct irqaction tbint_irqaction = { + .handler = timebase_interrupt, + .mask = CPU_MASK_NONE, + .name = "tbint", +}; + +/* per-board overridable init_internal_rtc() function. */ +void __init __attribute__ ((weak)) +init_internal_rtc(void) +{ + sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit); + + /* Disable the RTC one second and alarm interrupts. */ + clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); + + /* Enable the RTC */ + setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); + immr_unmap(sys_tmr); +} + +static int __init get_freq(char *name, unsigned long *val) +{ + struct device_node *cpu; + unsigned int *fp; + int found = 0; + + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); + + if (cpu) { + fp = (unsigned int *)get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp++; + } + + of_node_put(cpu); + } + + return found; +} + +/* The decrementer counts at the system (internal) clock frequency divided by + * sixteen, or external oscillator divided by four. We force the processor + * to use system clock divided by sixteen. + */ +void __init mpc8xx_calibrate_decr(void) +{ + struct device_node *cpu; + cark8xx_t *clk_r1; + car8xx_t *clk_r2; + sitk8xx_t *sys_tmr1; + sit8xx_t *sys_tmr2; + int irq, virq; + + clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); + + /* Unlock the SCCR. */ + out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); + out_be32(&clk_r1->cark_sccrk, KAPWR_KEY); + immr_unmap(clk_r1); + + /* Force all 8xx processors to use divide by 16 processor clock. */ + clk_r2 = (car8xx_t *) immr_map(im_clkrst); + setbits32(&clk_r2->car_sccr, 0x02000000); + immr_unmap(clk_r2); + + /* Processor frequency is MHz. + */ + ppc_tb_freq = 50000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 16; + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); + + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + + /* Perform some more timer/timebase initialization. This used + * to be done elsewhere, but other changes caused it to get + * called more than once....that is a bad thing. + * + * First, unlock all of the registers we are going to modify. + * To protect them from corruption during power down, registers + * that are maintained by keep alive power are "locked". To + * modify these registers we have to write the key value to + * the key location associated with the register. + * Some boards power up with these unlocked, while others + * are locked. Writing anything (including the unlock code?) + * to the unlocked registers will lock them again. So, here + * we guarantee the registers are locked, then we unlock them + * for our use. + */ + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY); + immr_unmap(sys_tmr1); + + init_internal_rtc(); + + /* Enabling the decrementer also enables the timebase interrupts + * (or from the other point of view, to get decrementer interrupts + * we have to enable the timebase). The decrementer interrupt + * is wired into the vector table, nothing to do here for that. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); + irq = irq_map[virq].hwirq; + + sys_tmr2 = (sit8xx_t *) immr_map(im_sit); + out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | + (TBSCR_TBF | TBSCR_TBE)); + immr_unmap(sys_tmr2); + + if (setup_irq(virq, &tbint_irqaction)) + panic("Could not allocate timer IRQ!"); + +#ifdef CONFIG_8xx_WDT + /* Install watchdog timer handler early because it might be + * already enabled by the bootloader + */ + m8xx_wdt_handler_install(binfo); +#endif +} + +/* The RTC on the MPC8xx is an internal register. + * We want to protect this during power down, so we need to unlock, + * modify, and re-lock. + */ + +int mpc8xx_set_rtc_time(struct rtc_time *tm) +{ + sitk8xx_t *sys_tmr1; + sit8xx_t *sys_tmr2; + int time; + + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr2 = (sit8xx_t *) immr_map(im_sit); + time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); + out_be32(&sys_tmr2->sit_rtc, time); + out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY); + + immr_unmap(sys_tmr2); + immr_unmap(sys_tmr1); + return 0; +} + +void mpc8xx_get_rtc_time(struct rtc_time *tm) +{ + unsigned long data; + sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit); + + /* Get time from the RTC. */ + data = in_be32(&sys_tmr->sit_rtc); + to_tm(data, tm); + tm->tm_year -= 1900; + tm->tm_mon -= 1; + immr_unmap(sys_tmr); + return; +} + +void mpc8xx_restart(char *cmd) +{ + __volatile__ unsigned char dummy; + car8xx_t * clk_r = (car8xx_t *) immr_map(im_clkrst); + + + local_irq_disable(); + + setbits32(&clk_r->car_plprcr, 0x00000080); + /* Clear the ME bit in MSR to cause checkstop on machine check + */ + mtmsr(mfmsr() & ~0x1000); + + dummy = in_8(&clk_r->res[0]); + printk("Restart failed\n"); + while(1); +} + +void mpc8xx_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + uint memsize = total_memory; + const char *model = ""; + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "Machine\t\t: %s\n", model); + of_node_put(root); + + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + +static void cpm_cascade(unsigned int irq, struct irq_desc *desc) +{ + int cascade_irq; + + if ((cascade_irq = cpm_get_irq()) >= 0) { + struct irq_desc *cdesc = irq_desc + cascade_irq; + + generic_handle_irq(cascade_irq); + cdesc->chip->eoi(cascade_irq); + } + desc->chip->eoi(irq); +} + +/* Initialize the internal interrupt controller. The number of + * interrupts supported can vary with the processor type, and the + * 82xx family can have up to 64. + * External interrupts can be either edge or level triggered, and + * need to be initialized by the appropriate driver. + */ +void __init m8xx_pic_init(void) +{ + int irq; + + if (mpc8xx_pic_init()) { + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + return; + } + + irq = cpm_pic_init(); + if (irq != NO_IRQ) + set_irq_chained_handler(irq, cpm_cascade); +} -- cgit