From a038a3ff8c6582404834852c043dadc73a5b68b4 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Wed, 24 Jan 2024 11:38:38 +0100 Subject: powerpc/6xx: set High BAT Enable flag on G2_LE cores MMU_FTR_USE_HIGH_BATS is set for G2_LE cores and derivatives like e300cX, but the high BATs need to be enabled in HID2 to work. Add register definitions and add the needed setup to __setup_cpu_603. This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled on systems where the flag has not been set by the bootloader already. Fixes: e4d6654ebe6e ("powerpc/mm/32s: rework mmu_mapin_ram()") Signed-off-by: Matthias Schiffer Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://msgid.link/20240124103838.43675-1-matthias.schiffer@ew.tq-group.com --- arch/powerpc/include/asm/reg.h | 2 ++ arch/powerpc/kernel/cpu_setup_6xx.S | 20 +++++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 7fd09f25452d..bb47af9054a9 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -617,6 +617,8 @@ #endif #define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ #define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */ +#define SPRN_HID2_G2_LE 0x3F3 /* G2_LE HID2 Register */ +#define HID2_G2_LE_HBE (1<<18) /* High BAT Enable (G2_LE) */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ #define SPRN_IABR2 0x3FA /* 83xx */ #define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */ diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index f29ce3dd6140..bfd3f442e5eb 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -26,6 +26,15 @@ BEGIN_FTR_SECTION bl __init_fpu_registers END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) bl setup_common_caches + + /* + * This assumes that all cores using __setup_cpu_603 with + * MMU_FTR_USE_HIGH_BATS are G2_LE compatible + */ +BEGIN_MMU_FTR_SECTION + bl setup_g2_le_hid2 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) + mtlr r5 blr _GLOBAL(__setup_cpu_604) @@ -115,6 +124,16 @@ SYM_FUNC_START_LOCAL(setup_604_hid0) blr SYM_FUNC_END(setup_604_hid0) +/* Enable high BATs for G2_LE and derivatives like e300cX */ +SYM_FUNC_START_LOCAL(setup_g2_le_hid2) + mfspr r11,SPRN_HID2_G2_LE + oris r11,r11,HID2_G2_LE_HBE@h + mtspr SPRN_HID2_G2_LE,r11 + sync + isync + blr +SYM_FUNC_END(setup_g2_le_hid2) + /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some * erratas we work around here. * Moto MPC710CE.pdf describes them, those are errata @@ -495,4 +514,3 @@ _GLOBAL(__restore_cpu_setup) mtcr r7 blr _ASM_NOKPROBE_SYMBOL(__restore_cpu_setup) - -- cgit