From 53e6d8e0060fe2bb9b11238f8250fdfbb0589425 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 12 Jan 2010 13:37:04 +0900 Subject: sh: mach-se: Convert SE7343 FPGA to dynamic IRQ allocation. This gets rid of the arbitrary set of vectors used by the SE7722 FPGA interrupt controller and switches over to a completely dynamic set. No assumptions regarding a contiguous range are made, and the platform resources themselves need to be filled in lazily. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7343/irq.c | 35 +++++++++++++++++++++-------------- arch/sh/boards/mach-se/7343/setup.c | 16 ++++++++++------ 2 files changed, 31 insertions(+), 20 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index 051c29d4eae0..c60fd13608d0 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -16,15 +16,17 @@ #include #include +unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; + static void disable_se7343_irq(unsigned int irq) { - unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + unsigned int bit = (unsigned int)get_irq_chip_data(irq); ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } static void enable_se7343_irq(unsigned int irq) { - unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + unsigned int bit = (unsigned int)get_irq_chip_data(irq); ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } @@ -38,18 +40,15 @@ static struct irq_chip se7343_irq_chip __read_mostly = { static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { unsigned short intv = ctrl_inw(PA_CPLD_ST); - struct irq_desc *ext_desc; - unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + unsigned int ext_irq = 0; intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; - while (intv) { - if (intv & 1) { - ext_desc = irq_desc + ext_irq; - handle_level_irq(ext_irq, ext_desc); - } - intv >>= 1; - ext_irq++; + for (; intv; intv >>= 1, ext_irq++) { + if (!(intv & 1)) + continue; + + generic_handle_irq(se7343_fpga_irq[ext_irq]); } } @@ -58,16 +57,24 @@ static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) */ void __init init_7343se_IRQ(void) { - int i; + int i, irq; ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ - for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) - set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { + irq = create_irq(); + if (irq < 0) + return; + se7343_fpga_irq[i] = irq; + + set_irq_chip_and_handler_name(se7343_fpga_irq[i], &se7343_irq_chip, handle_level_irq, "level"); + set_irq_chip_data(se7343_fpga_irq[i], (void *)i); + } + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 4de56f35f419..292cc47d853f 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -82,7 +82,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .mapbase = 0x16000000, .regshift = 1, .flags = ST16C2550C_FLAGS, - .irq = UARTA_IRQ, .uartclk = 7372800, }, [1] = { @@ -90,7 +89,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .mapbase = 0x17000000, .regshift = 1, .flags = ST16C2550C_FLAGS, - .irq = UARTB_IRQ, .uartclk = 7372800, }, { }, @@ -121,7 +119,7 @@ static struct resource usb_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = USB_IRQ, + /* Filled in later */ .flags = IORESOURCE_IRQ, }, }; @@ -138,8 +136,8 @@ static struct isp116x_platform_data usb_platform_data = { static struct platform_device usb_device = { .name = "isp116x-hcd", .id = -1, - .num_resources = ARRAY_SIZE(usb_resources), - .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), + .resource = usb_resources, .dev = { .platform_data = &usb_platform_data, }, @@ -155,6 +153,13 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = { static int __init sh7343se_devices_setup(void) { + /* Wire-up dynamic vectors */ + serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA]; + serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB]; + + usb_resources[2].start = usb_resources[2].end = + se7343_fpga_irq[SE7343_FPGA_IRQ_USB]; + return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); } @@ -179,6 +184,5 @@ static void __init sh7343se_setup(char **cmdline_p) static struct sh_machine_vector mv_7343se __initmv = { .mv_name = "SolutionEngine 7343", .mv_setup = sh7343se_setup, - .mv_nr_irqs = SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_NR, .mv_init_irq = init_7343se_IRQ, }; -- cgit From 02bf6cc72cc2a6258411ddf1649f33a65fc9a06e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 14 Jan 2010 20:58:58 +0900 Subject: sh: Preliminary SDK7786 board support. This stubs in some preliminary board support for the RTE SDK7786. This is quite stunted at the moment, and primarily builds on top of the system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity, with initial peripheral support restricted to the debug ethernet. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/boards/Kconfig | 7 ++ arch/sh/boards/mach-sdk7786/Makefile | 1 + arch/sh/boards/mach-sdk7786/setup.c | 219 +++++++++++++++++++++++++++++++++++ 3 files changed, 227 insertions(+) create mode 100644 arch/sh/boards/mach-sdk7786/Makefile create mode 100644 arch/sh/boards/mach-sdk7786/setup.c (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index aedd9deb5de2..c0a1992bb256 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -150,6 +150,13 @@ config SH_SDK7780 Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 evaluation board. +config SH_SDK7786 + bool "SDK7786" + depends on CPU_SUBTYPE_SH7786 + help + Select SDK7786 if configuring for a Renesas Technology Europe + SH7786-65nm board. + config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile new file mode 100644 index 000000000000..f663768429f0 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c new file mode 100644 index 000000000000..b460dcc785c1 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -0,0 +1,219 @@ +/* + * Renesas Technology Europe SDK7786 Support. + * + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0x07ffff00, + .end = 0x07ffff00 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x2c0), + .end = evt2irq(0x2c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct resource smbus_fpga_resource = { + .start = 0x07fff9e0, + .end = 0x07fff9e0 + SZ_32 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device smbus_fpga_device = { + .name = "i2c-sdk7786", + .id = 0, + .num_resources = 1, + .resource = &smbus_fpga_resource, +}; + +static struct resource smbus_pcie_resource = { + .start = 0x07fffc30, + .end = 0x07fffc30 + SZ_32 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device smbus_pcie_device = { + .name = "i2c-sdk7786", + .id = 1, + .num_resources = 1, + .resource = &smbus_pcie_resource, +}; + +static struct i2c_board_info __initdata sdk7786_i2c_devices[] = { + { + I2C_BOARD_INFO("max6900", 0x68), + }, +}; + +static struct platform_device *sh7786_devices[] __initdata = { + &smsc911x_device, + &smbus_fpga_device, + &smbus_pcie_device, +}; + +#define SBCR_REGS_BASE 0x07fff990 + +#define SCBR_I2CMEN (1 << 0) /* FPGA I2C master enable */ +#define SCBR_I2CCEN (1 << 1) /* CPU I2C master enable */ + +static int sdk7786_i2c_setup(void) +{ + void __iomem *sbcr; + unsigned int tmp; + + sbcr = ioremap_nocache(SBCR_REGS_BASE, SZ_16); + + /* + * Hand over I2C control to the FPGA. + */ + tmp = ioread16(sbcr); + tmp &= ~SCBR_I2CCEN; + tmp |= SCBR_I2CMEN; + iowrite16(tmp, sbcr); + + iounmap(sbcr); + + return i2c_register_board_info(0, sdk7786_i2c_devices, + ARRAY_SIZE(sdk7786_i2c_devices)); +} + +static int __init sdk7786_devices_setup(void) +{ + int ret; + + ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); + if (unlikely(ret != 0)) + return ret; + + return sdk7786_i2c_setup(); +} +__initcall(sdk7786_devices_setup); + +#define FPGA_REGS_BASE 0x07fff800 +#define FPGA_REGS_SIZE 1152 + +#define INTASR 0x010 +#define INTAMR 0x020 +#define INTBSR 0x090 +#define INTBMR 0x0a0 +#define INTMSR 0x130 + +#define IASELR1 0x210 +#define IASELR2 0x220 +#define IASELR3 0x230 +#define IASELR4 0x240 +#define IASELR5 0x250 +#define IASELR6 0x260 +#define IASELR7 0x270 +#define IASELR8 0x280 +#define IASELR9 0x290 +#define IASELR10 0x2a0 +#define IASELR11 0x2b0 +#define IASELR12 0x2c0 +#define IASELR13 0x2d0 +#define IASELR14 0x2e0 +#define IASELR15 0x2f0 + +static void __iomem *fpga_regs; + +static u16 fpga_read_reg(unsigned int reg) +{ + return __raw_readw(fpga_regs + reg); +} + +static void fpga_write_reg(u16 val, unsigned int reg) +{ + __raw_writew(val, fpga_regs + reg); +} + +enum { + ATA_IRQ_BIT = 1, + SPI_BUSY_BIT = 2, + LIRQ5_BIT = 3, + LIRQ6_BIT = 4, + LIRQ7_BIT = 5, + LIRQ8_BIT = 6, + KEY_IRQ_BIT = 7, + PEN_IRQ_BIT = 8, + ETH_IRQ_BIT = 9, + RTC_ALARM_BIT = 10, + CRYSTAL_FAIL_BIT = 12, + ETH_PME_BIT = 14, +}; + +static void __init init_sdk7786_IRQ(void) +{ + unsigned int tmp; + + fpga_regs = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE); + if (!fpga_regs) { + printk(KERN_ERR "Couldn't map FPGA registers\n"); + return; + } + + /* Enable priority encoding for all IRLs */ + fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); + + /* Clear FPGA interrupt status registers */ + fpga_write_reg(0x0000, INTASR); + fpga_write_reg(0x0000, INTBSR); + + /* Unmask FPGA interrupts */ + tmp = fpga_read_reg(INTAMR); + tmp &= ~(1 << ETH_IRQ_BIT); + fpga_write_reg(tmp, INTAMR); + + plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK); + plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); +} + +/* Initialize the board */ +static void __init sdk7786_setup(char **cmdline_p) +{ + printk(KERN_INFO "Renesas Technology Corp. SDK7786 support.\n"); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sdk7786 __initmv = { + .mv_name = "SDK7786", + .mv_setup = sdk7786_setup, + .mv_init_irq = init_sdk7786_IRQ, +}; -- cgit From 2267c7875b3a3a41b7a8cc9659d75ec934c98ffd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 15 Jan 2010 12:11:30 +0900 Subject: sh: mach-sdk7786: heartbeat support. Hand off the user LEDs to the heartbeat driver. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/setup.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index b460dcc785c1..f2d4b75bf31c 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -15,8 +15,22 @@ #include #include #include +#include #include +static struct resource heartbeat_resource = { + .start = 0x07fff8b0, + .end = 0x07fff8b0 + sizeof(u16) - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = 1, + .resource = &heartbeat_resource, +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -82,6 +96,7 @@ static struct i2c_board_info __initdata sdk7786_i2c_devices[] = { }; static struct platform_device *sh7786_devices[] __initdata = { + &heartbeat_device, &smsc911x_device, &smbus_fpga_device, &smbus_pcie_device, -- cgit From a09d2831b3457a92a58d67bddfed370516acfe28 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 15 Jan 2010 12:24:34 +0900 Subject: sh: heartbeat: Update boards for access size hinting. This updates the existing boards that specify the register width through platform data to use the resource flags instead. This eliminates platform data completely in most cases, and permits further improvement in the heartbeat driver as well as shrinking the overall private data size. Signed-off-by: Paul Mundt --- arch/sh/boards/board-polaris.c | 15 ++++++--------- arch/sh/boards/board-sh7785lcr.c | 21 ++++++--------------- arch/sh/boards/board-urquell.c | 21 ++++++--------------- arch/sh/boards/mach-ecovec24/setup.c | 16 +++++++--------- arch/sh/boards/mach-sdk7780/setup.c | 23 +++++++---------------- arch/sh/boards/mach-se/7206/setup.c | 15 ++++++--------- arch/sh/boards/mach-se/7343/setup.c | 21 ++++++--------------- arch/sh/boards/mach-se/770x/setup.c | 15 ++++++--------- arch/sh/boards/mach-se/7721/setup.c | 15 ++++++--------- arch/sh/boards/mach-se/7722/setup.c | 21 ++++++--------------- arch/sh/boards/mach-se/7724/setup.c | 21 ++++++--------------- arch/sh/boards/mach-se/7780/setup.c | 21 ++++++--------------- 12 files changed, 74 insertions(+), 151 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 62607eb51004..5bc126900ce3 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -59,15 +59,12 @@ static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), - .regsize = 8, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = PORT_PCDR, - .end = PORT_PCDR, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PORT_PCDR, + .end = PORT_PCDR, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }; static struct platform_device heartbeat_device = { @@ -76,8 +73,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; static struct platform_device *polaris_devices[] __initdata = { diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index e5a8a2fde39c..7eea90db6cea 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -32,26 +32,17 @@ * NOTE: This board has 2 physical memory maps. * Please look at include/asm-sh/sh7785lcr.h or hardware manual. */ -static struct resource heartbeat_resources[] = { - [0] = { - .start = PLD_LEDCR, - .end = PLD_LEDCR, - .flags = IORESOURCE_MEM, - }, -}; - -static struct heartbeat_data heartbeat_data = { - .regsize = 8, +static struct resource heartbeat_resource = { + .start = PLD_LEDCR, + .end = PLD_LEDCR, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; static struct mtd_partition nor_flash_partitions[] = { diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index 36b8bac9b124..268f09e46568 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -50,26 +50,17 @@ */ /* HeartBeat */ -static struct resource heartbeat_resources[] = { - [0] = { - .start = BOARDREG(SLEDR), - .end = BOARDREG(SLEDR), - .flags = IORESOURCE_MEM, - }, -}; - -static struct heartbeat_data heartbeat_data = { - .regsize = 16, +static struct resource heartbeat_resource = { + .start = BOARDREG(SLEDR), + .end = BOARDREG(SLEDR), + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1 + .resource = &heartbeat_resource, }; /* LAN91C111 */ diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 6a8861b39f05..a6b223332d15 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -64,18 +64,16 @@ /* Heartbeat */ static unsigned char led_pos[] = { 0, 1, 2, 3 }; + static struct heartbeat_data heartbeat_data = { - .regsize = 8, .nr_bits = 4, .bit_pos = led_pos, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = 0xA405012C, /* PTG */ - .end = 0xA405012E - 1, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = 0xA405012C, /* PTG */ + .end = 0xA405012E - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }; static struct platform_device heartbeat_device = { @@ -84,8 +82,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* MTD */ diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index aad94a78dc70..1d04657e992d 100644 --- a/arch/sh/boards/mach-sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c @@ -20,27 +20,18 @@ #define GPIO_PECR 0xFFEA0008 -//* Heartbeat */ -static struct heartbeat_data heartbeat_data = { - .regsize = 16, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +/* Heartbeat */ +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1 + .resource = &heartbeat_resource, }; /* SMC91x */ diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index f5466384972e..8f5c65d43d1d 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -50,15 +50,12 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), - .regsize = 32, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }; static struct platform_device heartbeat_device = { @@ -67,8 +64,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; static struct platform_device *se7206_devices[] __initdata = { diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 292cc47d853f..3412bb2973ae 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -11,26 +11,17 @@ #include #include -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, -}; - -static struct heartbeat_data heartbeat_data = { - .regsize = 16, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; static struct mtd_partition nor_flash_partitions[] = { diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 527eb6b12610..66d39d1b0901 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -93,15 +93,12 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), - .regsize = 16, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { @@ -110,8 +107,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; #if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 55af4c36b43a..460da53b4961 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -23,15 +23,12 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), - .regsize = 16, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { @@ -40,8 +37,8 @@ static struct platform_device heartbeat_device = { .dev = { .platform_data = &heartbeat_data, }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; static struct resource cf_ide_resources[] = { diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index b1cb9425b600..93675418171d 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -25,26 +25,17 @@ #include /* Heartbeat */ -static struct heartbeat_data heartbeat_data = { - .regsize = 16, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* SMC91x */ diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 5d0f70b46c97..cbfba783ee49 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -53,26 +53,17 @@ */ /* Heartbeat */ -static struct heartbeat_data heartbeat_data = { - .regsize = 16, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* LAN91C111 */ diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 1d3a867e94e3..f7bfb3f83692 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -17,26 +17,17 @@ #include /* Heartbeat */ -static struct heartbeat_data heartbeat_data = { - .regsize = 16, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* SMC91x */ -- cgit From 6f832e8aab8c4c6d28629e970e4a85e74a8d0be6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 15 Jan 2010 16:31:04 +0900 Subject: sh: mach-sdk7786: mode pins support. This wires up the mode pins support on the SDK7786. The pins are standard SH7786 pins, and all are fixed in software. Needed for the clock framework, PCIe, and so forth. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/setup.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index f2d4b75bf31c..c38c6cc293b5 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -218,6 +218,23 @@ static void __init init_sdk7786_IRQ(void) plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); } +#define MODSWR_REGS 0x07fff830 + +static int sdk7786_mode_pins(void) +{ + void __iomem *modswr; + int pin_states; + + modswr = ioremap_nocache(MODSWR_REGS, SZ_16); + if (!modswr) + return -ENXIO; + + pin_states = ioread16(modswr); + iounmap(modswr); + + return pin_states; +} + /* Initialize the board */ static void __init sdk7786_setup(char **cmdline_p) { @@ -230,5 +247,6 @@ static void __init sdk7786_setup(char **cmdline_p) static struct sh_machine_vector mv_sdk7786 __initmv = { .mv_name = "SDK7786", .mv_setup = sdk7786_setup, + .mv_mode_pins = sdk7786_mode_pins, .mv_init_irq = init_sdk7786_IRQ, }; -- cgit From 7dcaa8e8e67b2cfbe0097c9bb52e23aed5443b8b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 15 Jan 2010 19:13:56 +0900 Subject: sh: Generalize SH7786 PCIe support. Previously this was only built in for Urquell boards, but the same approach can be used on SDK7786 now that the mode pin reading is supported, so make it generic to SH7786. Signed-off-by: Paul Mundt --- arch/sh/boards/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index c0a1992bb256..938e87d51482 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -153,6 +153,7 @@ config SH_SDK7780 config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 + select SYS_SUPPORTS_PCI help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. -- cgit From 6f82b6ebb1dcc0c3c23820a70a5d79a60c4f5e84 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 5 Nov 2009 08:01:10 +0000 Subject: sh: Use ioremap_fixmed to map the SM501 DRAM config register We need to write to the DRAM config register very early and at such an early stage ioremap() is not available. So use ioremap_fixed() to map the register. The reason that we are avoiding using the legacy P2 mapping is that there will come a day when the legacy P2 mappings no longer exist. Signed-off-by: Matt Fleming --- arch/sh/boards/board-sh7785lcr.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index 7eea90db6cea..511de38d2046 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -332,8 +332,15 @@ static void __init sh7785lcr_setup(char **cmdline_p) pm_power_off = sh7785lcr_power_off; /* sm501 DRAM configuration */ - sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; - writel(0x000307c2, sm501_reg); + sm501_reg = ioremap_fixed(SM107_REG_ADDR, SM501_DRAM_CONTROL, + PAGE_KERNEL); + if (!sm501_reg) { + printk(KERN_ERR "%s: ioremap error.\n", __func__); + return; + } + + writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL); + iounmap_fixed(sm501_reg); } /* Return the board specific boot mode pin configuration */ -- cgit From d57d64080ddc0ff13fcffc898b6251074a482ba1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 13:34:38 +0900 Subject: sh: Prevent 64-bit pgprot clobbering across ioremap implementations. Presently 'flags' gets passed around a lot between the various ioremap helpers and implementations, which is only 32-bits. In the X2TLB case we use 64-bit pgprots which presently results in the upper 32bits being chopped off (which handily include our read/write/exec permissions). As such, we convert everything internally to using pgprot_t directly and simply convert over with pgprot_val() where needed. With this in place, transparent fixmap utilization for early ioremap works as expected. Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7785lcr.c | 6 +++--- arch/sh/boards/mach-landisk/setup.c | 2 +- arch/sh/boards/mach-lboxre2/setup.c | 2 +- arch/sh/boards/mach-sh03/setup.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index 511de38d2046..fe7e686c94ac 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -332,15 +333,14 @@ static void __init sh7785lcr_setup(char **cmdline_p) pm_power_off = sh7785lcr_power_off; /* sm501 DRAM configuration */ - sm501_reg = ioremap_fixed(SM107_REG_ADDR, SM501_DRAM_CONTROL, - PAGE_KERNEL); + sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL); if (!sm501_reg) { printk(KERN_ERR "%s: ioremap error.\n", __func__); return; } writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL); - iounmap_fixed(sm501_reg); + iounmap(sm501_reg); } /* Return the board specific boot mode pin configuration */ diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index db22ea2e6d49..59816355d199 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -63,7 +63,7 @@ static int __init landisk_devices_setup(void) /* open I/O area window */ paddrbase = virt_to_phys((void *)PA_AREA5_IO); prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); - cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); + cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot); if (!cf_ide_base) { printk("allocate_cf_area : can't open CF I/O window!\n"); return -ENOMEM; diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c index 2b0b5818e1e4..408dd5df7d45 100644 --- a/arch/sh/boards/mach-lboxre2/setup.c +++ b/arch/sh/boards/mach-lboxre2/setup.c @@ -57,7 +57,7 @@ static int __init lboxre2_devices_setup(void) paddrbase = virt_to_phys((void*)PA_AREA5_IO); psize = PAGE_SIZE; prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16); - cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot); + cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot); if (!cf0_io_base) { printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); return -ENOMEM; diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index 74cfb4b8b03d..f14ba0fa950b 100644 --- a/arch/sh/boards/mach-sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -82,7 +82,7 @@ static int __init sh03_devices_setup(void) /* open I/O area window */ paddrbase = virt_to_phys((void *)PA_AREA5_IO); prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); - cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); + cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot); if (!cf_ide_base) { printk("allocate_cf_area : can't open CF I/O window!\n"); return -ENOMEM; -- cgit From f33609344acfdde1c1acedf6de3efe6b80af93a6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 13:55:41 +0900 Subject: sh: Convert p3_ioremap() users to ioremap_prot(). This kills off the ancient p3_ioremap(), converting over to the more generic ioremap_prot() instead. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-landisk/setup.c | 2 +- arch/sh/boards/mach-lboxre2/setup.c | 4 ++-- arch/sh/boards/mach-sh03/setup.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 59816355d199..2d09d4d34f87 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -63,7 +63,7 @@ static int __init landisk_devices_setup(void) /* open I/O area window */ paddrbase = virt_to_phys((void *)PA_AREA5_IO); prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); - cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot); + cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot)); if (!cf_ide_base) { printk("allocate_cf_area : can't open CF I/O window!\n"); return -ENOMEM; diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c index 408dd5df7d45..79b4e0d77b71 100644 --- a/arch/sh/boards/mach-lboxre2/setup.c +++ b/arch/sh/boards/mach-lboxre2/setup.c @@ -56,8 +56,8 @@ static int __init lboxre2_devices_setup(void) /* open I/O area window */ paddrbase = virt_to_phys((void*)PA_AREA5_IO); psize = PAGE_SIZE; - prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16); - cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot); + prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); + cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot)); if (!cf0_io_base) { printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); return -ENOMEM; diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index f14ba0fa950b..af4a0c012a96 100644 --- a/arch/sh/boards/mach-sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -82,7 +82,7 @@ static int __init sh03_devices_setup(void) /* open I/O area window */ paddrbase = virt_to_phys((void *)PA_AREA5_IO); prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); - cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot); + cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot)); if (!cf_ide_base) { printk("allocate_cf_area : can't open CF I/O window!\n"); return -ENOMEM; -- cgit From c8098218271d19e7123d8b9137b9a4b87e5ffec0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 19:38:36 +0900 Subject: sh: mach-sdk7786: Detect/configure/propagate EXTAL. This uses the mode pins exposed through the FPGA to work out whether we're driven from EXTAL or not and does the appropriate setup and propagation through the clock framework. This will also -EINVAL out for anyone adding in their own oscillators, forcing proper configuration with the clock framework instead of proceeding on with bogus clock values. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/setup.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index c38c6cc293b5..0e4b1c39742c 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -235,6 +236,27 @@ static int sdk7786_mode_pins(void) return pin_states; } +static int sdk7786_clk_init(void) +{ + struct clk *clk; + int ret; + + /* + * Only handle the EXTAL case, anyone interfacing a crystal + * resonator will need to provide their own input clock. + */ + if (test_mode_pin(MODE_PIN9)) + return -EINVAL; + + clk = clk_get(NULL, "extal"); + if (!clk || IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333333); + clk_put(clk); + + return ret; +} + /* Initialize the board */ static void __init sdk7786_setup(char **cmdline_p) { @@ -248,5 +270,6 @@ static struct sh_machine_vector mv_sdk7786 __initmv = { .mv_name = "SDK7786", .mv_setup = sdk7786_setup, .mv_mode_pins = sdk7786_mode_pins, + .mv_clk_init = sdk7786_clk_init, .mv_init_irq = init_sdk7786_IRQ, }; -- cgit From dea3cf1c3935047a5b0d21b21d26718e09135f97 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 20:09:28 +0900 Subject: sh: urquell: Handle EXTAL configuration here, too. urquell happens to use the same mode pins and EXTAL configuration as SDK7786, so just copy it over. Signed-off-by: Paul Mundt --- arch/sh/boards/board-urquell.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index 268f09e46568..8aeac64810dc 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -2,7 +2,7 @@ * Renesas Technology Corp. SH7786 Urquell Support. * * Copyright (C) 2008 Kuninori Morimoto - * Copyright (C) 2009 Paul Mundt + * Copyright (C) 2009, 2010 Paul Mundt * * Based on board-sh7785lcr.c * Copyright (C) 2008 Yoshihiro Shimoda @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -175,6 +176,27 @@ static int urquell_mode_pins(void) return __raw_readw(UBOARDREG(MDSWMR)); } +static int urquell_clk_init(void) +{ + struct clk *clk; + int ret; + + /* + * Only handle the EXTAL case, anyone interfacing a crystal + * resonator will need to provide their own input clock. + */ + if (test_mode_pin(MODE_PIN9)) + return -EINVAL; + + clk = clk_get(NULL, "extal"); + if (!clk || IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333333); + clk_put(clk); + + return ret; +} + /* Initialize the board */ static void __init urquell_setup(char **cmdline_p) { @@ -191,4 +213,5 @@ static struct sh_machine_vector mv_urquell __initmv = { .mv_setup = urquell_setup, .mv_init_irq = urquell_init_irq, .mv_mode_pins = urquell_mode_pins, + .mv_clk_init = urquell_clk_init, }; -- cgit From 14965f16b4bb8f3e51b09c1d8f61b8e98f9d12db Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Jan 2010 20:10:33 +0900 Subject: sh: Fix up sdk7780 and urquell builds. These two got broken in the heartbeat private data conversion, fix them up. Signed-off-by: Paul Mundt --- arch/sh/boards/board-urquell.c | 2 +- arch/sh/boards/mach-sdk7780/setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index 8aeac64810dc..a9bd6e3ee10b 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -60,7 +60,7 @@ static struct resource heartbeat_resource = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .num_resources = 1 + .num_resources = 1, .resource = &heartbeat_resource, }; diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index 1d04657e992d..b887373a2599 100644 --- a/arch/sh/boards/mach-sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c @@ -30,7 +30,7 @@ static struct resource heartbeat_resource = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .num_resources = 1 + .num_resources = 1, .resource = &heartbeat_resource, }; -- cgit From efd590d57a5edddabaaf4cfaf532c0f674193b81 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jan 2010 15:08:36 +0900 Subject: sh: mach-sdk7786: FPGA updates. This does a bit of refactoring of the FPGA management code. The primary FPGA initialization is moved out to its own file in preparation for implementing some of the more complex capabilities, a complete set of register definitions is provided, and all of the existing users in the board code are moved over to use the new interface instead of setting up overlapping mappings. This also corrects the FPGA size, which previously was chomped off at the SDIF control register. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/Makefile | 2 +- arch/sh/boards/mach-sdk7786/fpga.c | 37 +++++++++++++++++ arch/sh/boards/mach-sdk7786/setup.c | 78 +++++------------------------------- 3 files changed, 47 insertions(+), 70 deletions(-) create mode 100644 arch/sh/boards/mach-sdk7786/fpga.c (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile index f663768429f0..50c8065deaa0 100644 --- a/arch/sh/boards/mach-sdk7786/Makefile +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -1 +1 @@ -obj-y := setup.o +obj-y := setup.o fpga.o diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c new file mode 100644 index 000000000000..99f903c8b238 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/fpga.c @@ -0,0 +1,37 @@ +/* + * SDK7786 FPGA Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +#define FPGA_REGS_BASE 0x07fff800 +#define FPGA_REGS_SIZE 0x490 + +void __iomem *sdk7786_fpga_base; + +void __init sdk7786_fpga_init(void) +{ + u16 version, date; + + sdk7786_fpga_base = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE); + if (unlikely(!sdk7786_fpga_base)) { + panic("FPGA remapping failed.\n"); + return; + } + + version = fpga_read_reg(FPGAVR); + date = fpga_read_reg(FPGADR); + + pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n", + bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf), + ((date >> 12) & 0xf) + 2000, + (date >> 8) & 0xf, bcd2bin(date & 0xff)); +} diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 0e4b1c39742c..8dbbdea9c983 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -18,6 +18,7 @@ #include #include #include +#include static struct resource heartbeat_resource = { .start = 0x07fff8b0, @@ -103,27 +104,17 @@ static struct platform_device *sh7786_devices[] __initdata = { &smbus_pcie_device, }; -#define SBCR_REGS_BASE 0x07fff990 - -#define SCBR_I2CMEN (1 << 0) /* FPGA I2C master enable */ -#define SCBR_I2CCEN (1 << 1) /* CPU I2C master enable */ - static int sdk7786_i2c_setup(void) { - void __iomem *sbcr; unsigned int tmp; - sbcr = ioremap_nocache(SBCR_REGS_BASE, SZ_16); - /* * Hand over I2C control to the FPGA. */ - tmp = ioread16(sbcr); + tmp = fpga_read_reg(SBCR); tmp &= ~SCBR_I2CCEN; tmp |= SCBR_I2CMEN; - iowrite16(tmp, sbcr); - - iounmap(sbcr); + fpga_write_reg(tmp, SBCR); return i2c_register_board_info(0, sdk7786_i2c_devices, ARRAY_SIZE(sdk7786_i2c_devices)); @@ -141,43 +132,6 @@ static int __init sdk7786_devices_setup(void) } __initcall(sdk7786_devices_setup); -#define FPGA_REGS_BASE 0x07fff800 -#define FPGA_REGS_SIZE 1152 - -#define INTASR 0x010 -#define INTAMR 0x020 -#define INTBSR 0x090 -#define INTBMR 0x0a0 -#define INTMSR 0x130 - -#define IASELR1 0x210 -#define IASELR2 0x220 -#define IASELR3 0x230 -#define IASELR4 0x240 -#define IASELR5 0x250 -#define IASELR6 0x260 -#define IASELR7 0x270 -#define IASELR8 0x280 -#define IASELR9 0x290 -#define IASELR10 0x2a0 -#define IASELR11 0x2b0 -#define IASELR12 0x2c0 -#define IASELR13 0x2d0 -#define IASELR14 0x2e0 -#define IASELR15 0x2f0 - -static void __iomem *fpga_regs; - -static u16 fpga_read_reg(unsigned int reg) -{ - return __raw_readw(fpga_regs + reg); -} - -static void fpga_write_reg(u16 val, unsigned int reg) -{ - __raw_writew(val, fpga_regs + reg); -} - enum { ATA_IRQ_BIT = 1, SPI_BUSY_BIT = 2, @@ -197,12 +151,6 @@ static void __init init_sdk7786_IRQ(void) { unsigned int tmp; - fpga_regs = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE); - if (!fpga_regs) { - printk(KERN_ERR "Couldn't map FPGA registers\n"); - return; - } - /* Enable priority encoding for all IRLs */ fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); @@ -219,21 +167,9 @@ static void __init init_sdk7786_IRQ(void) plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); } -#define MODSWR_REGS 0x07fff830 - static int sdk7786_mode_pins(void) { - void __iomem *modswr; - int pin_states; - - modswr = ioremap_nocache(MODSWR_REGS, SZ_16); - if (!modswr) - return -ENXIO; - - pin_states = ioread16(modswr); - iounmap(modswr); - - return pin_states; + return fpga_read_reg(MODSWR); } static int sdk7786_clk_init(void) @@ -260,7 +196,11 @@ static int sdk7786_clk_init(void) /* Initialize the board */ static void __init sdk7786_setup(char **cmdline_p) { - printk(KERN_INFO "Renesas Technology Corp. SDK7786 support.\n"); + pr_info("Renesas Technology Europe SDK7786 support:\n"); + + sdk7786_fpga_init(); + + pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf); } /* -- cgit From 5f240718b475dcddee86b138b624f24c681dbb29 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jan 2010 15:23:54 +0900 Subject: sh: mach-sdk7786: Split out FPGA IRQ controller setup. This moves out the FPGA IRQ controller setup code to its own file, in preparation for switching off of IRL mode and having it provide its own irq_chip. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/Makefile | 2 +- arch/sh/boards/mach-sdk7786/irq.c | 48 ++++++++++++++++++++++++++++++++++++ arch/sh/boards/mach-sdk7786/setup.c | 40 +++--------------------------- 3 files changed, 52 insertions(+), 38 deletions(-) create mode 100644 arch/sh/boards/mach-sdk7786/irq.c (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile index 50c8065deaa0..a29f19e85b63 100644 --- a/arch/sh/boards/mach-sdk7786/Makefile +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -1 +1 @@ -obj-y := setup.o fpga.o +obj-y := setup.o fpga.o irq.o diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c new file mode 100644 index 000000000000..46943a0da5b7 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/irq.c @@ -0,0 +1,48 @@ +/* + * SDK7786 FPGA IRQ Controller Support. + * + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include + +enum { + ATA_IRQ_BIT = 1, + SPI_BUSY_BIT = 2, + LIRQ5_BIT = 3, + LIRQ6_BIT = 4, + LIRQ7_BIT = 5, + LIRQ8_BIT = 6, + KEY_IRQ_BIT = 7, + PEN_IRQ_BIT = 8, + ETH_IRQ_BIT = 9, + RTC_ALARM_BIT = 10, + CRYSTAL_FAIL_BIT = 12, + ETH_PME_BIT = 14, +}; + +void __init sdk7786_init_irq(void) +{ + unsigned int tmp; + + /* Enable priority encoding for all IRLs */ + fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); + + /* Clear FPGA interrupt status registers */ + fpga_write_reg(0x0000, INTASR); + fpga_write_reg(0x0000, INTBSR); + + /* Unmask FPGA interrupts */ + tmp = fpga_read_reg(INTAMR); + tmp &= ~(1 << ETH_IRQ_BIT); + fpga_write_reg(tmp, INTAMR); + + plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK); + plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); +} diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 8dbbdea9c983..3c3c9a38cfda 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -15,10 +15,11 @@ #include #include #include +#include +#include #include #include #include -#include static struct resource heartbeat_resource = { .start = 0x07fff8b0, @@ -132,41 +133,6 @@ static int __init sdk7786_devices_setup(void) } __initcall(sdk7786_devices_setup); -enum { - ATA_IRQ_BIT = 1, - SPI_BUSY_BIT = 2, - LIRQ5_BIT = 3, - LIRQ6_BIT = 4, - LIRQ7_BIT = 5, - LIRQ8_BIT = 6, - KEY_IRQ_BIT = 7, - PEN_IRQ_BIT = 8, - ETH_IRQ_BIT = 9, - RTC_ALARM_BIT = 10, - CRYSTAL_FAIL_BIT = 12, - ETH_PME_BIT = 14, -}; - -static void __init init_sdk7786_IRQ(void) -{ - unsigned int tmp; - - /* Enable priority encoding for all IRLs */ - fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); - - /* Clear FPGA interrupt status registers */ - fpga_write_reg(0x0000, INTASR); - fpga_write_reg(0x0000, INTBSR); - - /* Unmask FPGA interrupts */ - tmp = fpga_read_reg(INTAMR); - tmp &= ~(1 << ETH_IRQ_BIT); - fpga_write_reg(tmp, INTAMR); - - plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK); - plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); -} - static int sdk7786_mode_pins(void) { return fpga_read_reg(MODSWR); @@ -211,5 +177,5 @@ static struct sh_machine_vector mv_sdk7786 __initmv = { .mv_setup = sdk7786_setup, .mv_mode_pins = sdk7786_mode_pins, .mv_clk_init = sdk7786_clk_init, - .mv_init_irq = init_sdk7786_IRQ, + .mv_init_irq = sdk7786_init_irq, }; -- cgit From b51989b8afe9409ee68c67ce2a5de4390693bd2b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jan 2010 16:53:11 +0900 Subject: sh: mach-sdk7786: reset controller reboot support. This wires up the machine_ops reboot call to use the system reset controller. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/setup.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 3c3c9a38cfda..f094ea2ee783 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -20,6 +20,7 @@ #include #include #include +#include static struct resource heartbeat_resource = { .start = 0x07fff8b0, @@ -159,6 +160,11 @@ static int sdk7786_clk_init(void) return ret; } +static void sdk7786_restart(char *cmd) +{ + fpga_write_reg(0xa5a5, SRSTR); +} + /* Initialize the board */ static void __init sdk7786_setup(char **cmdline_p) { @@ -167,6 +173,8 @@ static void __init sdk7786_setup(char **cmdline_p) sdk7786_fpga_init(); pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf); + + machine_ops.restart = sdk7786_restart; } /* -- cgit From d9116d07f60383cef134c43a0ba15ec4375310fc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jan 2010 18:25:19 +0900 Subject: sh: mach-sdk7786: Probe system FPGA area mapping. This implements dynamic probing for the system FPGA. The system reset controller contains a fixed magic read word in order to identify the FPGA. This just utilizes a simple loop that scans across all of the fixed physical areas (area 0 through area 6) to locate the FPGA. The FPGA also contains register information detailing the area mappings and chip select settings for all of the other blocks, so this needs to be done before we can set up anything else. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sdk7786/fpga.c | 43 ++++++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c index 99f903c8b238..3e4ec66a0417 100644 --- a/arch/sh/boards/mach-sdk7786/fpga.c +++ b/arch/sh/boards/mach-sdk7786/fpga.c @@ -11,9 +11,44 @@ #include #include #include +#include -#define FPGA_REGS_BASE 0x07fff800 -#define FPGA_REGS_SIZE 0x490 +#define FPGA_REGS_OFFSET 0x03fff800 +#define FPGA_REGS_SIZE 0x490 + +/* + * The FPGA can be mapped in any of the generally available areas, + * so we attempt to scan for it using the fixed SRSTR read magic. + * + * Once the FPGA is located, the rest of the mapping data for the other + * components can be determined dynamically from its section mapping + * registers. + */ +static void __iomem *sdk7786_fpga_probe(void) +{ + unsigned long area; + void __iomem *base; + + /* + * Iterate over all of the areas where the FPGA could be mapped. + * The possible range is anywhere from area 0 through 6, area 7 + * is reserved. + */ + for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) { + base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE); + if (!base) { + /* Failed to remap this area, move along. */ + continue; + } + + if (ioread16(base + SRSTR) == SRSTR_MAGIC) + return base; /* Found it! */ + + iounmap(base); + } + + return NULL; +} void __iomem *sdk7786_fpga_base; @@ -21,9 +56,9 @@ void __init sdk7786_fpga_init(void) { u16 version, date; - sdk7786_fpga_base = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE); + sdk7786_fpga_base = sdk7786_fpga_probe(); if (unlikely(!sdk7786_fpga_base)) { - panic("FPGA remapping failed.\n"); + panic("FPGA detection failed.\n"); return; } -- cgit From 9d56dd3b083a3bec56e9da35ce07baca81030b03 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 26 Jan 2010 12:58:40 +0900 Subject: sh: Mass ctrl_in/outX to __raw_read/writeX conversion. The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: Paul Mundt --- arch/sh/boards/board-magicpanelr2.c | 74 ++++++++++++++-------------- arch/sh/boards/board-polaris.c | 22 ++++----- arch/sh/boards/board-shmin.c | 4 +- arch/sh/boards/mach-ap325rxa/setup.c | 16 +++--- arch/sh/boards/mach-cayman/irq.c | 16 +++--- arch/sh/boards/mach-dreamcast/rtc.c | 20 ++++---- arch/sh/boards/mach-ecovec24/setup.c | 20 ++++---- arch/sh/boards/mach-highlander/irq-r7780mp.c | 2 +- arch/sh/boards/mach-highlander/irq-r7780rp.c | 2 +- arch/sh/boards/mach-highlander/irq-r7785rp.c | 16 +++--- arch/sh/boards/mach-highlander/psw.c | 4 +- arch/sh/boards/mach-highlander/setup.c | 14 +++--- arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 2 +- arch/sh/boards/mach-hp6xx/pm.c | 38 +++++++------- arch/sh/boards/mach-hp6xx/setup.c | 12 ++--- arch/sh/boards/mach-kfr2r09/setup.c | 14 +++--- arch/sh/boards/mach-landisk/gio.c | 12 ++--- arch/sh/boards/mach-landisk/irq.c | 6 +-- arch/sh/boards/mach-landisk/psw.c | 4 +- arch/sh/boards/mach-landisk/setup.c | 4 +- arch/sh/boards/mach-microdev/io.c | 4 +- arch/sh/boards/mach-microdev/irq.c | 10 ++-- arch/sh/boards/mach-migor/setup.c | 8 +-- arch/sh/boards/mach-r2d/irq.c | 4 +- arch/sh/boards/mach-r2d/setup.c | 8 +-- arch/sh/boards/mach-rsk/devices-rsk7203.c | 2 +- arch/sh/boards/mach-sdk7780/irq.c | 4 +- arch/sh/boards/mach-sdk7780/setup.c | 6 +-- arch/sh/boards/mach-se/7206/io.c | 2 +- arch/sh/boards/mach-se/7206/irq.c | 40 +++++++-------- arch/sh/boards/mach-se/7343/irq.c | 10 ++-- arch/sh/boards/mach-se/7343/setup.c | 6 +-- arch/sh/boards/mach-se/770x/irq.c | 14 +++--- arch/sh/boards/mach-se/7721/irq.c | 2 +- arch/sh/boards/mach-se/7721/setup.c | 8 +-- arch/sh/boards/mach-se/7722/irq.c | 10 ++-- arch/sh/boards/mach-se/7722/setup.c | 34 ++++++------- arch/sh/boards/mach-se/7724/irq.c | 20 ++++---- arch/sh/boards/mach-se/7724/setup.c | 26 +++++----- arch/sh/boards/mach-se/7780/irq.c | 18 +++---- arch/sh/boards/mach-se/7780/setup.c | 26 +++++----- arch/sh/boards/mach-sh03/rtc.c | 50 +++++++++---------- arch/sh/boards/mach-sh7763rdp/irq.c | 10 ++-- arch/sh/boards/mach-sh7763rdp/setup.c | 40 +++++++-------- arch/sh/boards/mach-snapgear/setup.c | 2 +- arch/sh/boards/mach-systemh/irq.c | 12 ++--- arch/sh/boards/mach-titan/io.c | 30 +++++------ arch/sh/boards/mach-x3proto/ilsel.c | 8 +-- arch/sh/boards/mach-x3proto/setup.c | 2 +- 49 files changed, 359 insertions(+), 359 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 99ffc5f1c0dd..efba450a0518 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -23,7 +23,7 @@ #include #include -#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) +#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Prefer cmdline over RedBoot */ static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; @@ -60,33 +60,33 @@ static void __init setup_chip_select(void) { /* CS2: LAN (0x08000000 - 0x0bffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x36db0400, CS2BCR); + __raw_writel(0x36db0400, CS2BCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x000003c0, CS2WCR); + __raw_writel(0x000003c0, CS2WCR); /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS4BCR); + __raw_writel(0x00000200, CS4BCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS4WCR); + __raw_writel(0x00100981, CS4WCR); /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5ABCR); + __raw_writel(0x00000200, CS5ABCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5AWCR); + __raw_writel(0x00100981, CS5AWCR); /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5BBCR); + __raw_writel(0x00000200, CS5BBCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5BWCR); + __raw_writel(0x00100981, CS5BWCR); /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS6ABCR); + __raw_writel(0x00000200, CS6ABCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ - ctrl_outl(0x001009C1, CS6AWCR); + __raw_writel(0x001009C1, CS6AWCR); } static void __init setup_port_multiplexing(void) @@ -94,71 +94,71 @@ static void __init setup_port_multiplexing(void) /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */ - ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */ - ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */ - ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */ - ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */ - ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ + __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */ - ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ + __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */ - ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ + __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */ - ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ + __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */ - ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ + __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ /* K7 (x); K6 (x); K5 (x); K4 (x); * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) */ - ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ + __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; * L3 TCK; L2 (x); L1 (x); L0 (x); */ - ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ + __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); * M1 CS5B(CAN3_CS); M0 GPI+(nc); */ - ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ + __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, * LAN_RESET=off, BUZZER=off, LCD_BL=off */ #if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 - ctrl_outb(0x30, PORT_PMDR); + __raw_writeb(0x30, PORT_PMDR); #elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 - ctrl_outb(0xF0, PORT_PMDR); + __raw_writeb(0xF0, PORT_PMDR); #else #error Unknown revision of PLATFORM_MP_R2 #endif @@ -167,8 +167,8 @@ static void __init setup_port_multiplexing(void) * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) */ - ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ - ctrl_outb(0x10, PORT_PPDR); + __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ + __raw_writeb(0x10, PORT_PPDR); /* R7 A25; R6 A24; R5 A23; R4 A22; * R3 A21; R2 A20; R1 A19; R0 A0; @@ -185,22 +185,22 @@ static void __init setup_port_multiplexing(void) /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */ - ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ + __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) */ - ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ + __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */ - ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ + __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */ - ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ + __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ } static void __init mpr2_setup(char **cmdline_p) @@ -209,24 +209,24 @@ static void __init mpr2_setup(char **cmdline_p) * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */ - ctrl_outw(0xAABC, PORT_PSELA); + __raw_writew(0xAABC, PORT_PSELA); /* set Pin Select Register B: * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */ - ctrl_outw(0x3C00, PORT_PSELB); + __raw_writew(0x3C00, PORT_PSELB); /* set Pin Select Register C: * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */ - ctrl_outw(0x0000, PORT_PSELC); + __raw_writew(0x0000, PORT_PSELC); /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */ - ctrl_outw(0x0000, PORT_PSELD); + __raw_writew(0x0000, PORT_PSELD); /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ - ctrl_outw(0x0101, PORT_UTRCTL); + __raw_writew(0x0101, PORT_UTRCTL); /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ - ctrl_outw(0xA5C0, PORT_UCLKCR_W); + __raw_writew(0xA5C0, PORT_UCLKCR_W); setup_chip_select(); diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 5bc126900ce3..594866356c24 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -89,15 +89,15 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); /* Configure area 5 with 2 wait states */ - wcr = ctrl_inw(WCR2); + wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); wcr |= (WAIT_STATES_10 << 10); - ctrl_outw(wcr, WCR2); + __raw_writew(wcr, WCR2); /* Configure area 5 for 32-bit access */ - bcr_mask = ctrl_inw(BCR2); + bcr_mask = __raw_readw(BCR2); bcr_mask |= 1 << 10; - ctrl_outw(bcr_mask, BCR2); + __raw_writew(bcr_mask, BCR2); return platform_add_devices(polaris_devices, ARRAY_SIZE(polaris_devices)); @@ -128,13 +128,13 @@ static struct ipr_desc ipr_irq_desc = { static void __init init_polaris_irq(void) { /* Disable all interrupts */ - ctrl_outw(0, BCR_ILCRA); - ctrl_outw(0, BCR_ILCRB); - ctrl_outw(0, BCR_ILCRC); - ctrl_outw(0, BCR_ILCRD); - ctrl_outw(0, BCR_ILCRE); - ctrl_outw(0, BCR_ILCRF); - ctrl_outw(0, BCR_ILCRG); + __raw_writew(0, BCR_ILCRA); + __raw_writew(0, BCR_ILCRB); + __raw_writew(0, BCR_ILCRC); + __raw_writew(0, BCR_ILCRD); + __raw_writew(0, BCR_ILCRE); + __raw_writew(0, BCR_ILCRF); + __raw_writew(0, BCR_ILCRG); register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c index b1dcbbc89188..325bed53b87e 100644 --- a/arch/sh/boards/board-shmin.c +++ b/arch/sh/boards/board-shmin.c @@ -17,8 +17,8 @@ static void __init init_shmin_irq(void) { - ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ - ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. + __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ + __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. plat_irq_setup_pins(IRQ_MODE_IRQ); } diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 1f5fa5c44f6d..27277cbdb636 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -159,21 +159,21 @@ static void ap320_wvga_power_on(void *board_data) msleep(100); /* ASD AP-320/325 LCD ON */ - ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG); /* backlight */ gpio_set_value(GPIO_PTS3, 0); - ctrl_outw(0x100, FPGA_BKLREG); + __raw_writew(0x100, FPGA_BKLREG); } static void ap320_wvga_power_off(void *board_data) { /* backlight */ - ctrl_outw(0, FPGA_BKLREG); + __raw_writew(0, FPGA_BKLREG); gpio_set_value(GPIO_PTS3, 1); /* ASD AP-320/325 LCD OFF */ - ctrl_outw(0, FPGA_LCDREG); + __raw_writew(0, FPGA_LCDREG); } static struct sh_mobile_lcdc_info lcdc_info = { @@ -595,7 +595,7 @@ static int __init ap325rxa_devices_setup(void) gpio_request(GPIO_PTZ4, NULL); gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */ - ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); /* FLCTL */ gpio_request(GPIO_FN_FCE, NULL); @@ -613,9 +613,9 @@ static int __init ap325rxa_devices_setup(void) gpio_request(GPIO_FN_FWE, NULL); gpio_request(GPIO_FN_FRB, NULL); - ctrl_outw(0, PORT_HIZCRC); - ctrl_outw(0xFFFF, PORT_DRVCRA); - ctrl_outw(0xFFFF, PORT_DRVCRB); + __raw_writew(0, PORT_HIZCRC); + __raw_writew(0xFFFF, PORT_DRVCRA); + __raw_writew(0xFFFF, PORT_DRVCRB); platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index 33f770856319..1394b078db36 100644 --- a/arch/sh/boards/mach-cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -66,9 +66,9 @@ static void enable_cayman_irq(unsigned int irq) reg = EPLD_MASK_BASE + ((irq / 8) << 2); bit = 1<<(irq % 8); local_irq_save(flags); - mask = ctrl_inl(reg); + mask = __raw_readl(reg); mask |= bit; - ctrl_outl(mask, reg); + __raw_writel(mask, reg); local_irq_restore(flags); } @@ -83,9 +83,9 @@ void disable_cayman_irq(unsigned int irq) reg = EPLD_MASK_BASE + ((irq / 8) << 2); bit = 1<<(irq % 8); local_irq_save(flags); - mask = ctrl_inl(reg); + mask = __raw_readl(reg); mask &= ~bit; - ctrl_outl(mask, reg); + __raw_writel(mask, reg); local_irq_restore(flags); } @@ -109,8 +109,8 @@ int cayman_irq_demux(int evt) unsigned long status; int i; - status = ctrl_inl(EPLD_STATUS_BASE) & - ctrl_inl(EPLD_MASK_BASE) & 0xff; + status = __raw_readl(EPLD_STATUS_BASE) & + __raw_readl(EPLD_MASK_BASE) & 0xff; if (status == 0) { irq = -1; } else { @@ -126,8 +126,8 @@ int cayman_irq_demux(int evt) unsigned long status; int i; - status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) & - ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff; + status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) & + __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff; if (status == 0) { irq = -1; } else { diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c index a7433685798d..061d65714fcc 100644 --- a/arch/sh/boards/mach-dreamcast/rtc.c +++ b/arch/sh/boards/mach-dreamcast/rtc.c @@ -35,11 +35,11 @@ static void aica_rtc_gettimeofday(struct timespec *ts) unsigned long val1, val2; do { - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); } while (val1 != val2); ts->tv_sec = val1 - TWENTY_YEARS; @@ -60,14 +60,14 @@ static int aica_rtc_settimeofday(const time_t secs) unsigned long adj = secs + TWENTY_YEARS; do { - ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); - ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); + __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); + __raw_writel((adj & 0xffff), AICA_RTC_SECS_L); - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); } while (val1 != val2); return 0; diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index a49cce16e783..1135c3b848f2 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -696,13 +696,13 @@ static struct platform_device camera_devices[] = { #define FCLKBCR 0xa415000c static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -853,7 +853,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTG1, 0); gpio_direction_output(GPIO_PTG2, 0); gpio_direction_output(GPIO_PTG3, 0); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); /* enable SH-Eth */ gpio_request(GPIO_PTA1, NULL); @@ -873,16 +873,16 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LNKSTA, NULL); /* enable USB */ - ctrl_outw(0x0000, 0xA4D80000); - ctrl_outw(0x0000, 0xA4D90000); + __raw_writew(0x0000, 0xA4D80000); + __raw_writew(0x0000, 0xA4D90000); gpio_request(GPIO_PTB3, NULL); gpio_request(GPIO_PTB4, NULL); gpio_request(GPIO_PTB5, NULL); gpio_direction_input(GPIO_PTB3); gpio_direction_output(GPIO_PTB4, 0); gpio_direction_output(GPIO_PTB5, 0); - ctrl_outw(0x0600, 0xa40501d4); - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa4050192); if (gpio_get_value(GPIO_PTB3)) { printk(KERN_INFO "USB1 function is selected\n"); @@ -923,7 +923,7 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LCDVSYN, NULL); gpio_request(GPIO_FN_LCDDON, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); gpio_request(GPIO_PTE6, NULL); gpio_request(GPIO_PTU1, NULL); @@ -935,7 +935,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTA2, 0); /* I/O buffer drive ability is high */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ @@ -1067,7 +1067,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTB7, 0); /* I/O buffer drive ability is high for SDHI1 */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c index 83c28bcd4d2a..9893fd3a1358 100644 --- a/arch/sh/boards/mach-highlander/irq-r7780mp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c @@ -64,7 +64,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { + if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) { printk(KERN_INFO "Using r7780mp interrupt controller.\n"); register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c index b721e86b5af4..0805b2151452 100644 --- a/arch/sh/boards/mach-highlander/irq-r7780rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c @@ -57,7 +57,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if (ctrl_inw(0xa5000600)) { + if (__raw_readw(0xa5000600)) { printk(KERN_INFO "Using r7780rp interrupt controller.\n"); register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c index 3811b060a39b..558b24862776 100644 --- a/arch/sh/boards/mach-highlander/irq-r7785rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c @@ -66,20 +66,20 @@ static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000) return NULL; printk(KERN_INFO "Using r7785rp interrupt controller.\n"); - ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ + __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ /* Setup the FPGA IRL */ - ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */ - ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */ - ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ - ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ - ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ - ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ + __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */ + __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */ + __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */ + __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */ + __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */ + __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */ register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c index 37b1a2ee71a5..522786318d36 100644 --- a/arch/sh/boards/mach-highlander/psw.c +++ b/arch/sh/boards/mach-highlander/psw.c @@ -24,7 +24,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) unsigned int l, mask; int ret = 0; - l = ctrl_inw(PA_DBSW); + l = __raw_readw(PA_DBSW); /* Nothing to do if there's no state change */ if (psw->state) { @@ -45,7 +45,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) out: /* Clear the switch IRQs */ l |= (0x7 << 12); - ctrl_outw(l, PA_DBSW); + __raw_writew(l, PA_DBSW); return IRQ_RETVAL(ret); } diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index f663c14d8885..affd66747ba3 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -311,13 +311,13 @@ device_initcall(r7780rp_devices_setup); */ static int ivdr_clk_enable(struct clk *clk) { - ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); + __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); return 0; } static void ivdr_clk_disable(struct clk *clk) { - ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); + __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); } static struct clk_ops ivdr_clk_ops = { @@ -337,7 +337,7 @@ static struct clk *r7780rp_clocks[] = { static void r7780rp_power_off(void) { if (mach_is_r7780mp() || mach_is_r7785rp()) - ctrl_outw(0x0001, PA_POFF); + __raw_writew(0x0001, PA_POFF); } /* @@ -345,7 +345,7 @@ static void r7780rp_power_off(void) */ static void __init highlander_setup(char **cmdline_p) { - u16 ver = ctrl_inw(PA_VERREG); + u16 ver = __raw_readw(PA_VERREG); int i; printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", @@ -370,12 +370,12 @@ static void __init highlander_setup(char **cmdline_p) clk_enable(clk); } - ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ + __raw_writew(0x0000, PA_OBLED); /* Clear LED. */ if (mach_is_r7780rp()) - ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ + __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */ - ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ + __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ pm_power_off = r7780rp_power_off; } diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c index e85212faf40a..b49535c0ddd9 100644 --- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c @@ -53,7 +53,7 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info) info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? APM_AC_ONLINE : APM_AC_OFFLINE; - pgdr = ctrl_inb(PGDR); + pgdr = __raw_readb(PGDR); if (pgdr & PGDR_MAIN_BATTERY_OUT) { info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; info->battery_flag = 0x80; diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c index d936c1af7620..4499a3749d40 100644 --- a/arch/sh/boards/mach-hp6xx/pm.c +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -53,17 +53,17 @@ static void pm_enter(void) sh_wdt_write_cnt(0); /* disable PLL1 */ - frqcr = ctrl_inw(FRQCR); + frqcr = __raw_readw(FRQCR); frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY); - ctrl_outw(frqcr, FRQCR); + __raw_writew(frqcr, FRQCR); /* enable standby */ - stbcr = ctrl_inb(STBCR); - ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR); + stbcr = __raw_readb(STBCR); + __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR); /* set self-refresh */ - mcr = ctrl_inw(MCR); - ctrl_outw(mcr & ~MCR_RFSH, MCR); + mcr = __raw_readw(MCR); + __raw_writew(mcr & ~MCR_RFSH, MCR); /* set interrupt handler */ asm volatile("stc vbr, %0" : "=r" (vbr_old)); @@ -73,8 +73,8 @@ static void pm_enter(void) &wakeup_start, &wakeup_end - &wakeup_start); asm volatile("ldc %0, vbr" : : "r" (vbr_new)); - ctrl_outw(0, RTCNT); - ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR); + __raw_writew(0, RTCNT); + __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR); cpu_sleep(); @@ -83,14 +83,14 @@ static void pm_enter(void) free_page(vbr_new); /* enable PLL1 */ - frqcr = ctrl_inw(FRQCR); + frqcr = __raw_readw(FRQCR); frqcr |= FRQCR_PSTBY; - ctrl_outw(frqcr, FRQCR); + __raw_writew(frqcr, FRQCR); udelay(50); frqcr |= FRQCR_PLLEN; - ctrl_outw(frqcr, FRQCR); + __raw_writew(frqcr, FRQCR); - ctrl_outb(stbcr, STBCR); + __raw_writeb(stbcr, STBCR); clear_bl_bit(); } @@ -115,21 +115,21 @@ static int hp6x0_pm_enter(suspend_state_t state) outw(hd64461_stbcr, HD64461_STBCR); #endif - ctrl_outb(0x1f, DACR); + __raw_writeb(0x1f, DACR); - stbcr = ctrl_inb(STBCR); - ctrl_outb(0x01, STBCR); + stbcr = __raw_readb(STBCR); + __raw_writeb(0x01, STBCR); - stbcr2 = ctrl_inb(STBCR2); - ctrl_outb(0x7f , STBCR2); + stbcr2 = __raw_readb(STBCR2); + __raw_writeb(0x7f , STBCR2); outw(0xf07f, HD64461_SCPUCR); pm_enter(); outw(0, HD64461_SCPUCR); - ctrl_outb(stbcr, STBCR); - ctrl_outb(stbcr2, STBCR2); + __raw_writeb(stbcr, STBCR); + __raw_writeb(stbcr2, STBCR2); #ifdef CONFIG_HD64461_ENABLER hd64461_stbcr = inw(HD64461_STBCR); diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index e6dd5e96321e..8c9add5f4cfa 100644 --- a/arch/sh/boards/mach-hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -149,19 +149,19 @@ static void __init hp6xx_setup(char **cmdline_p) sh_dac_output(0, DAC_SPEAKER_VOLUME); sh_dac_disable(DAC_SPEAKER_VOLUME); - v8 = ctrl_inb(DACR); + v8 = __raw_readb(DACR); v8 &= ~DACR_DAE; - ctrl_outb(v8,DACR); + __raw_writeb(v8,DACR); - v8 = ctrl_inb(SCPDR); + v8 = __raw_readb(SCPDR); v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; v8 &= ~SCPDR_TS_SCAN_ENABLE; - ctrl_outb(v8, SCPDR); + __raw_writeb(v8, SCPDR); - v = ctrl_inw(SCPCR); + v = __raw_readw(SCPCR); v &= ~SCPCR_TS_MASK; v |= SCPCR_TS_ENABLE; - ctrl_outw(v, SCPCR); + __raw_writew(v, SCPCR); } device_initcall(hp6xx_devices_setup); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 5d7b5d92475e..ca9e82d77d0a 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -282,7 +282,7 @@ static int camera_power(struct device *dev, int mode) * use 1.8 V for VccQ_VIO * use 2.85V for VccQ_SR */ - ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); + __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); /* reset clear */ ret = gpio_request(GPIO_PTB4, NULL); @@ -492,13 +492,13 @@ static int kfr2r09_usb0_gadget_setup(void) if (kfr2r09_usb0_gadget_i2c_setup() != 0) return -ENODEV; /* unable to configure using i2c */ - ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ msleep(20); /* wait 20ms to let the clock settle */ clk_enable(clk_get(NULL, "usb0")); - ctrl_outw(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa40501d4); return 0; } @@ -526,12 +526,12 @@ static int __init kfr2r09_devices_setup(void) gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ /* setup NOR flash at CS0 */ - ctrl_outl(0x36db0400, BSC_CS0BCR); - ctrl_outl(0x00000500, BSC_CS0WCR); + __raw_writel(0x36db0400, BSC_CS0BCR); + __raw_writel(0x00000500, BSC_CS0WCR); /* setup NAND flash at CS4 */ - ctrl_outl(0x36db0400, BSC_CS4BCR); - ctrl_outl(0x00000500, BSC_CS4WCR); + __raw_writel(0x36db0400, BSC_CS4BCR); + __raw_writel(0x00000500, BSC_CS4WCR); /* setup KEYSC pins */ gpio_request(GPIO_FN_KEYOUT0, NULL); diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c index 528013188196..01e6abb769b9 100644 --- a/arch/sh/boards/mach-landisk/gio.c +++ b/arch/sh/boards/mach-landisk/gio.c @@ -76,39 +76,39 @@ static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) break; case GIODRV_IOCSGIODATA1: /* write byte */ - ctrl_outb((unsigned char)(0x0ff & data), addr); + __raw_writeb((unsigned char)(0x0ff & data), addr); break; case GIODRV_IOCSGIODATA2: /* write word */ if (addr & 0x01) { return -EFAULT; } - ctrl_outw((unsigned short int)(0x0ffff & data), addr); + __raw_writew((unsigned short int)(0x0ffff & data), addr); break; case GIODRV_IOCSGIODATA4: /* write long */ if (addr & 0x03) { return -EFAULT; } - ctrl_outl(data, addr); + __raw_writel(data, addr); break; case GIODRV_IOCGGIODATA1: /* read byte */ - data = ctrl_inb(addr); + data = __raw_readb(addr); break; case GIODRV_IOCGGIODATA2: /* read word */ if (addr & 0x01) { return -EFAULT; } - data = ctrl_inw(addr); + data = __raw_readw(addr); break; case GIODRV_IOCGGIODATA4: /* read long */ if (addr & 0x03) { return -EFAULT; } - data = ctrl_inl(addr); + data = __raw_readl(addr); break; default: return -EFAULT; diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c index 7b284cde1f58..96f38a4187d0 100644 --- a/arch/sh/boards/mach-landisk/irq.c +++ b/arch/sh/boards/mach-landisk/irq.c @@ -22,14 +22,14 @@ static void disable_landisk_irq(unsigned int irq) { unsigned char mask = 0xff ^ (0x01 << (irq - 5)); - ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK); + __raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK); } static void enable_landisk_irq(unsigned int irq) { unsigned char value = (0x01 << (irq - 5)); - ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK); + __raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK); } static struct irq_chip landisk_irq_chip __read_mostly = { @@ -52,5 +52,5 @@ void __init init_landisk_IRQ(void) handle_level_irq, "level"); enable_landisk_irq(i); } - ctrl_outb(0x00, PA_PWRINT_CLR); + __raw_writeb(0x00, PA_PWRINT_CLR); } diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c index e6b0efa098d1..bef83522f958 100644 --- a/arch/sh/boards/mach-landisk/psw.c +++ b/arch/sh/boards/mach-landisk/psw.c @@ -25,7 +25,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) unsigned int sw_value; int ret = 0; - sw_value = (0x0ff & (~ctrl_inb(PA_STATUS))); + sw_value = (0x0ff & (~__raw_readb(PA_STATUS))); /* Nothing to do if there's no state change */ if (psw->state) { @@ -42,7 +42,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) out: /* Clear the switch IRQs */ - ctrl_outb(0x00, PA_PWRINT_CLR); + __raw_writeb(0x00, PA_PWRINT_CLR); return IRQ_RETVAL(ret); } diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 2d09d4d34f87..50337acc18c5 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -25,7 +25,7 @@ void init_landisk_IRQ(void); static void landisk_power_off(void) { - ctrl_outb(0x01, PA_SHUTDOWN); + __raw_writeb(0x01, PA_SHUTDOWN); } static struct resource cf_ide_resources[3]; @@ -88,7 +88,7 @@ __initcall(landisk_devices_setup); static void __init landisk_setup(char **cmdline_p) { /* LED ON */ - ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED); + __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED); printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); pm_power_off = landisk_power_off; diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c index 52dd748211c7..2960c659020e 100644 --- a/arch/sh/boards/mach-microdev/io.c +++ b/arch/sh/boards/mach-microdev/io.c @@ -141,10 +141,10 @@ static inline void delay(void) #if defined(CONFIG_PCI) /* System board present, just make a dummy SRAM access. (CS0 will be mapped to PCI memory, probably good to avoid it.) */ - ctrl_inw(0xa6800000); + __raw_readw(0xa6800000); #else /* CS0 will be mapped to flash, ROM etc so safe to access it. */ - ctrl_inw(0xa0000000); + __raw_readw(0xa0000000); #endif } diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c index b551963579c1..a26d16669aa2 100644 --- a/arch/sh/boards/mach-microdev/irq.c +++ b/arch/sh/boards/mach-microdev/irq.c @@ -88,7 +88,7 @@ static void disable_microdev_irq(unsigned int irq) fpgaIrq = fpgaIrqTable[irq].fpgaIrq; /* disable interrupts on the FPGA INTC register */ - ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); + __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); } static void enable_microdev_irq(unsigned int irq) @@ -107,13 +107,13 @@ static void enable_microdev_irq(unsigned int irq) priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); /* set priority for the interrupt */ - priorities = ctrl_inl(priorityReg); + priorities = __raw_readl(priorityReg); priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); - ctrl_outl(priorities, priorityReg); + __raw_writel(priorities, priorityReg); /* enable interrupts on the FPGA INTC register */ - ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); + __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); } /* This function sets the desired irq handler to be a MicroDev type */ @@ -134,7 +134,7 @@ extern void __init init_microdev_irq(void) int i; /* disable interrupts on the FPGA INTC register */ - ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); + __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG); for (i = 0; i < NUM_EXTERNAL_IRQS; i++) make_microdev_irq(i); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 507c77be476d..ed2eeeb390a5 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -516,8 +516,8 @@ static int __init migor_devices_setup(void) /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */ gpio_request(GPIO_FN_IRQ0, NULL); - ctrl_outl(0x00003400, BSC_CS4BCR); - ctrl_outl(0x00110080, BSC_CS4WCR); + __raw_writel(0x00003400, BSC_CS4BCR); + __raw_writel(0x00110080, BSC_CS4WCR); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT0, NULL); @@ -533,7 +533,7 @@ static int __init migor_devices_setup(void) /* NAND Flash */ gpio_request(GPIO_FN_CS6A_CE2B, NULL); - ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR); + __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR); gpio_request(GPIO_PTA1, NULL); gpio_direction_input(GPIO_PTA1); @@ -627,7 +627,7 @@ static int __init migor_devices_setup(void) #else gpio_direction_output(GPIO_PTT0, 1); #endif - ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */ + __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */ platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c index 78d7b27c80da..574f009c3c31 100644 --- a/arch/sh/boards/mach-r2d/irq.c +++ b/arch/sh/boards/mach-r2d/irq.c @@ -129,7 +129,7 @@ void __init init_rts7751r2d_IRQ(void) { struct intc_desc *d; - switch (ctrl_inw(PA_VERREG) & 0xf0) { + switch (__raw_readw(PA_VERREG) & 0xf0) { #ifdef CONFIG_RTS7751R2D_PLUS case 0x10: printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n"); @@ -147,7 +147,7 @@ void __init init_rts7751r2d_IRQ(void) #endif default: printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n", - ctrl_inw(PA_VERREG)); + __raw_readw(PA_VERREG)); return; } diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c index a625ecb93e47..b84df6a3a93c 100644 --- a/arch/sh/boards/mach-r2d/setup.c +++ b/arch/sh/boards/mach-r2d/setup.c @@ -70,7 +70,7 @@ static struct spi_board_info spi_bus[] = { static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state) { BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */ - ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE); + __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE); } static struct sh_spi_info spi_info = { @@ -262,7 +262,7 @@ __initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { - ctrl_outw(0x0001, PA_POWOFF); + __raw_writew(0x0001, PA_POWOFF); } /* @@ -271,14 +271,14 @@ static void rts7751r2d_power_off(void) static void __init rts7751r2d_setup(char **cmdline_p) { void __iomem *sm501_reg; - u16 ver = ctrl_inw(PA_VERREG); + u16 ver = __raw_readw(PA_VERREG); printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); printk(KERN_INFO "FPGA version:%d (revision:%d)\n", (ver >> 4) & 0xf, ver & 0xf); - ctrl_outw(0x0000, PA_OUTPORT); + __raw_writew(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; /* sm501 dram configuration: diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index c37617e63220..4fa08ba10253 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -96,7 +96,7 @@ static int __init rsk7203_devices_setup(void) gpio_request(GPIO_FN_RXD0, NULL); /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */ - ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */ + __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */ gpio_request(GPIO_FN_IRQ0_PB, NULL); return platform_add_devices(rsk7203_devices, diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c index 855558163c58..e5f7564f2511 100644 --- a/arch/sh/boards/mach-sdk7780/irq.c +++ b/arch/sh/boards/mach-sdk7780/irq.c @@ -37,9 +37,9 @@ void __init init_sdk7780_IRQ(void) { printk(KERN_INFO "Using SDK7780 interrupt controller.\n"); - ctrl_outw(0xFFFF, FPGA_IRQ0MR); + __raw_writew(0xFFFF, FPGA_IRQ0MR); /* Setup IRL 0-3 */ - ctrl_outw(0x0003, FPGA_IMSR); + __raw_writew(0x0003, FPGA_IMSR); plat_irq_setup_pins(IRQ_MODE_IRL3210); register_intc_controller(&fpga_intc_desc); diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index b887373a2599..4da38db4b5fe 100644 --- a/arch/sh/boards/mach-sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c @@ -74,8 +74,8 @@ device_initcall(sdk7780_devices_setup); static void __init sdk7780_setup(char **cmdline_p) { - u16 ver = ctrl_inw(FPGA_FPVERR); - u16 dateStamp = ctrl_inw(FPGA_FPDATER); + u16 ver = __raw_readw(FPGA_FPVERR); + u16 dateStamp = __raw_readw(FPGA_FPDATER); printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n"); printk(KERN_INFO "Board version: %d (revision %d), " @@ -85,7 +85,7 @@ static void __init sdk7780_setup(char **cmdline_p) dateStamp); /* Setup pin mux'ing for PCIC */ - ctrl_outw(0x0000, GPIO_PECR); + __raw_writew(0x0000, GPIO_PECR); } /* diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 180455642a43..adadc77532ee 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -16,7 +16,7 @@ static inline void delay(void) { - ctrl_inw(0x20000000); /* P2 ROM Area */ + __raw_readw(0x20000000); /* P2 ROM Area */ } /* MS7750 requires special versions of in*, out* routines, since diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index aef7f052851a..79be4bc59933 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq) unsigned short msk0,msk1; /* Set the priority in IPR to 0 */ - val = ctrl_inw(INTC_IPR01); + val = __raw_readw(INTC_IPR01); val &= mask; - ctrl_outw(val, INTC_IPR01); + __raw_writew(val, INTC_IPR01); /* FPGA mask set */ - msk0 = ctrl_inw(INTMSK0); - msk1 = ctrl_inw(INTMSK1); + msk0 = __raw_readw(INTMSK0); + msk1 = __raw_readw(INTMSK1); switch (irq) { case IRQ0_IRQ: @@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq) msk1 |= 0x00ff; break; } - ctrl_outw(msk0, INTMSK0); - ctrl_outw(msk1, INTMSK1); + __raw_writew(msk0, INTMSK0); + __raw_writew(msk1, INTMSK1); } static void enable_se7206_irq(unsigned int irq) @@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq) unsigned short msk0,msk1; /* Set priority in IPR back to original value */ - val = ctrl_inw(INTC_IPR01); + val = __raw_readw(INTC_IPR01); val |= value; - ctrl_outw(val, INTC_IPR01); + __raw_writew(val, INTC_IPR01); /* FPGA mask reset */ - msk0 = ctrl_inw(INTMSK0); - msk1 = ctrl_inw(INTMSK1); + msk0 = __raw_readw(INTMSK0); + msk1 = __raw_readw(INTMSK1); switch (irq) { case IRQ0_IRQ: @@ -82,8 +82,8 @@ static void enable_se7206_irq(unsigned int irq) msk1 &= ~0x00ff; break; } - ctrl_outw(msk0, INTMSK0); - ctrl_outw(msk1, INTMSK1); + __raw_writew(msk0, INTMSK0); + __raw_writew(msk1, INTMSK1); } static void eoi_se7206_irq(unsigned int irq) @@ -93,8 +93,8 @@ static void eoi_se7206_irq(unsigned int irq) if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) enable_se7206_irq(irq); /* FPGA isr clear */ - sts0 = ctrl_inw(INTSTS0); - sts1 = ctrl_inw(INTSTS1); + sts0 = __raw_readw(INTSTS0); + sts1 = __raw_readw(INTSTS1); switch (irq) { case IRQ0_IRQ: @@ -108,8 +108,8 @@ static void eoi_se7206_irq(unsigned int irq) sts1 &= ~0x00ff; break; } - ctrl_outw(sts0, INTSTS0); - ctrl_outw(sts1, INTSTS1); + __raw_writew(sts0, INTSTS0); + __raw_writew(sts1, INTSTS1); } static struct irq_chip se7206_irq_chip __read_mostly = { @@ -136,11 +136,11 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ /* FPGA System register setup*/ - ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ - ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ + __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ - ctrl_outw(0x0001,INTSEL); + __raw_writew(0x0001,INTSEL); } diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index c60fd13608d0..d4305c26e9f7 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -21,13 +21,13 @@ unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; static void disable_se7343_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); + __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } static void enable_se7343_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); + __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } static struct irq_chip se7343_irq_chip __read_mostly = { @@ -39,7 +39,7 @@ static struct irq_chip se7343_irq_chip __read_mostly = { static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned short intv = ctrl_inw(PA_CPLD_ST); + unsigned short intv = __raw_readw(PA_CPLD_ST); unsigned int ext_irq = 0; intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; @@ -59,8 +59,8 @@ void __init init_7343se_IRQ(void) { int i, irq; - ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ - ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */ + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { irq = create_irq(); diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 3412bb2973ae..d2370af56d77 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -161,10 +161,10 @@ device_initcall(sh7343se_devices_setup); */ static void __init sh7343se_setup(char **cmdline_p) { - ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + __raw_writew(0xf900, FPGA_OUT); /* FPGA */ - ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ - ctrl_outw(0x0020, PORT_PSELD); + __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + __raw_writew(0x0020, PORT_PSELD); printk(KERN_INFO "MS7343CP01 Setup...done\n"); } diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c index ec1fea571b52..1028c17b81bc 100644 --- a/arch/sh/boards/mach-se/770x/irq.c +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -96,13 +96,13 @@ static struct ipr_desc ipr_irq_desc = { void __init init_se_IRQ(void) { /* Disable all interrupts */ - ctrl_outw(0, BCR_ILCRA); - ctrl_outw(0, BCR_ILCRB); - ctrl_outw(0, BCR_ILCRC); - ctrl_outw(0, BCR_ILCRD); - ctrl_outw(0, BCR_ILCRE); - ctrl_outw(0, BCR_ILCRF); - ctrl_outw(0, BCR_ILCRG); + __raw_writew(0, BCR_ILCRA); + __raw_writew(0, BCR_ILCRB); + __raw_writew(0, BCR_ILCRC); + __raw_writew(0, BCR_ILCRD); + __raw_writew(0, BCR_ILCRE); + __raw_writew(0, BCR_ILCRF); + __raw_writew(0, BCR_ILCRG); register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c index b417acc4dad0..d85022ea3f12 100644 --- a/arch/sh/boards/mach-se/7721/irq.c +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -38,7 +38,7 @@ static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors, void __init init_se7721_IRQ(void) { /* PPCR */ - ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118); + __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118); register_intc_controller(&intc_desc); intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0); diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 460da53b4961..7416ad7ee53a 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -80,10 +80,10 @@ device_initcall(se7721_devices_setup); static void __init se7721_setup(char **cmdline_p) { /* for USB */ - ctrl_outw(0x0000, 0xA405010C); /* PGCR */ - ctrl_outw(0x0000, 0xA405010E); /* PHCR */ - ctrl_outw(0x00AA, 0xA4050118); /* PPCR */ - ctrl_outw(0x0000, 0xA4050124); /* PSELA */ + __raw_writew(0x0000, 0xA405010C); /* PGCR */ + __raw_writew(0x0000, 0xA405010E); /* PHCR */ + __raw_writew(0x00AA, 0xA4050118); /* PPCR */ + __raw_writew(0x0000, 0xA4050124); /* PSELA */ } /* diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index b221b6842b0d..61605db04ee6 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -21,13 +21,13 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; static void disable_se7722_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); + __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); } static void enable_se7722_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); + __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); } static struct irq_chip se7722_irq_chip __read_mostly = { @@ -39,7 +39,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = { static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned short intv = ctrl_inw(IRQ01_STS); + unsigned short intv = __raw_readw(IRQ01_STS); unsigned int ext_irq = 0; intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; @@ -59,8 +59,8 @@ void __init init_se7722_IRQ(void) { int i, irq; - ctrl_outw(0, IRQ01_MASK); /* disable all irqs */ - ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + __raw_writew(0, IRQ01_MASK); /* disable all irqs */ + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { irq = create_irq(); diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 93675418171d..80a4e571b310 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -156,32 +156,32 @@ device_initcall(se7722_devices_setup); static void __init se7722_setup(char **cmdline_p) { - ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ + __raw_writew(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ - ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ + __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ + __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ /* LCDC I/O */ - ctrl_outw(0x0020, PORT_PSELD); + __raw_writew(0x0020, PORT_PSELD); /* SIOF1*/ - ctrl_outw(0x0003, PORT_PSELB); - ctrl_outw(0xe000, PORT_PSELC); - ctrl_outw(0x0000, PORT_PKCR); + __raw_writew(0x0003, PORT_PSELB); + __raw_writew(0xe000, PORT_PSELC); + __raw_writew(0x0000, PORT_PKCR); /* LCDC */ - ctrl_outw(0x4020, PORT_PHCR); - ctrl_outw(0x0000, PORT_PLCR); - ctrl_outw(0x0000, PORT_PMCR); - ctrl_outw(0x0002, PORT_PRCR); - ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */ + __raw_writew(0x4020, PORT_PHCR); + __raw_writew(0x0000, PORT_PLCR); + __raw_writew(0x0000, PORT_PMCR); + __raw_writew(0x0002, PORT_PRCR); + __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */ /* KEYSC */ - ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */ - ctrl_outw(0x0000, PORT_PYCR); - ctrl_outw(0x0000, PORT_PZCR); - ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); - ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); + __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */ + __raw_writew(0x0000, PORT_PYCR); + __raw_writew(0x0000, PORT_PZCR); + __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); + __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); } /* diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index f76cf3b49f23..e5e021a7d1e6 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -72,14 +72,14 @@ static void disable_se7724_irq(unsigned int irq) { struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; - ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr); + __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr); } static void enable_se7724_irq(unsigned int irq) { struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; - ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr); + __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr); } static struct irq_chip se7724_irq_chip __read_mostly = { @@ -92,7 +92,7 @@ static struct irq_chip se7724_irq_chip __read_mostly = { static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) { struct fpga_irq set = get_fpga_irq(irq); - unsigned short intv = ctrl_inw(set.sraddr); + unsigned short intv = __raw_readw(set.sraddr); struct irq_desc *ext_desc; unsigned int ext_irq = set.base; @@ -115,13 +115,13 @@ void __init init_se7724_IRQ(void) { int i; - ctrl_outw(0xffff, IRQ0_MR); /* mask all */ - ctrl_outw(0xffff, IRQ1_MR); /* mask all */ - ctrl_outw(0xffff, IRQ2_MR); /* mask all */ - ctrl_outw(0x0000, IRQ0_SR); /* clear irq */ - ctrl_outw(0x0000, IRQ1_SR); /* clear irq */ - ctrl_outw(0x0000, IRQ2_SR); /* clear irq */ - ctrl_outw(0x002a, IRQ_MODE); /* set irq type */ + __raw_writew(0xffff, IRQ0_MR); /* mask all */ + __raw_writew(0xffff, IRQ1_MR); /* mask all */ + __raw_writew(0xffff, IRQ2_MR); /* mask all */ + __raw_writew(0x0000, IRQ0_SR); /* clear irq */ + __raw_writew(0x0000, IRQ1_SR); /* clear irq */ + __raw_writew(0x0000, IRQ2_SR); /* clear irq */ + __raw_writew(0x002a, IRQ_MODE); /* set irq type */ for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index cbfba783ee49..242dc843f574 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -256,12 +256,12 @@ static struct platform_device ceu1_device = { #define FCLKACR 0xa4150008 static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void) int t = 10000; while (t--) { - if (!ctrl_inw(EEPROM_STAT)) + if (!__raw_readw(EEPROM_STAT)) return 1; cpu_relax(); } @@ -542,13 +542,13 @@ static void __init sh_eth_init(void) /* read MAC addr from EEPROM */ for (i = 0 ; i < 3 ; i++) { - ctrl_outw(0x0, EEPROM_OP); /* read */ - ctrl_outw(i*2, EEPROM_ADR); - ctrl_outw(0x1, EEPROM_STRT); + __raw_writew(0x0, EEPROM_OP); /* read */ + __raw_writew(i*2, EEPROM_ADR); + __raw_writew(0x1, EEPROM_STRT); if (!sh_eth_is_eeprom_ready()) return; - mac = ctrl_inw(EEPROM_DATA); + mac = __raw_readw(EEPROM_DATA); sh_eth_plat.mac_addr[i << 1] = mac & 0xff; sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8; } @@ -585,7 +585,7 @@ arch_initcall(arch_setup); static int __init devices_setup(void) { - u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ + u16 sw = __raw_readw(SW4140); /* select camera, monitor */ struct clk *fsia_clk; /* register board specific self-refresh code */ @@ -595,7 +595,7 @@ static int __init devices_setup(void) &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); /* Reset Release */ - ctrl_outw(ctrl_inw(FPGA_OUT) & + __raw_writew(__raw_readw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ (1 << 7) | /* AK4643 */ @@ -604,7 +604,7 @@ static int __init devices_setup(void) FPGA_OUT); /* turn on USB clocks, use external clock */ - ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); #ifdef CONFIG_PM /* Let LED9 show STATUS2 */ @@ -633,10 +633,10 @@ static int __init devices_setup(void) #endif /* enable USB0 port */ - ctrl_outw(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa40501d4); /* enable USB1 port */ - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa4050192); /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); @@ -684,7 +684,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_LCDVCPWC, NULL); gpio_request(GPIO_FN_LCDRD, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); /* enable CEU0 */ gpio_request(GPIO_FN_VIO0_D15, NULL); diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 121744c08714..d5c9edc172a3 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -24,30 +24,30 @@ void __init init_se7780_IRQ(void) { /* enable all interrupt at FPGA */ - ctrl_outw(0, FPGA_INTMSK1); + __raw_writew(0, FPGA_INTMSK1); /* mask SM501 interrupt */ - ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); + __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); /* enable all interrupt at FPGA */ - ctrl_outw(0, FPGA_INTMSK2); + __raw_writew(0, FPGA_INTMSK2); /* set FPGA INTSEL register */ /* FPGA + 0x06 */ - ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) | + __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) | (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1); /* FPGA + 0x08 */ - ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | + __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) | (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) | (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2); /* FPGA + 0x0A */ - ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); + __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ /* ICR1: detect low level(for 2ndcut) */ - ctrl_outl(0xAAAA0000, INTC_ICR1); + __raw_writel(0xAAAA0000, INTC_ICR1); /* * FPGA PCISEL register initialize @@ -63,6 +63,6 @@ void __init init_se7780_IRQ(void) * INTD || INTD | INTC | -- | INTA * ------------------------------------- */ - ctrl_outw(0x0013, FPGA_PCI_INTSEL1); - ctrl_outw(0xE402, FPGA_PCI_INTSEL2); + __raw_writew(0x0013, FPGA_PCI_INTSEL1); + __raw_writew(0xE402, FPGA_PCI_INTSEL2); } diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index f7bfb3f83692..6f7c207138e1 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -75,14 +75,14 @@ device_initcall(se7780_devices_setup); static void __init se7780_setup(char **cmdline_p) { /* "SH-Linux" on LED Display */ - ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); - ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); - ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); - ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); - ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); - ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); - ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); - ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); + __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); + __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); + __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); + __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); + __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); + __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); + __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); + __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n"); @@ -93,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p) * REQ2/GNT2 -> Serial ATA * REQ3/GNT3 -> PCI slot */ - ctrl_outw(0x0213, FPGA_REQSEL); + __raw_writew(0x0213, FPGA_REQSEL); /* GPIO setting */ - ctrl_outw(0x0000, GPIO_PECR); - ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR); - ctrl_outw(0x0c00, GPIO_PMSELR); + __raw_writew(0x0000, GPIO_PECR); + __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR); + __raw_writew(0x0c00, GPIO_PMSELR); /* iVDR Power ON */ - ctrl_outw(0x0001, FPGA_IVDRPW); + __raw_writew(0x0001, FPGA_IVDRPW); } /* diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c index a8b9f844ab5b..1b200990500c 100644 --- a/arch/sh/boards/mach-sh03/rtc.c +++ b/arch/sh/boards/mach-sh03/rtc.c @@ -44,15 +44,15 @@ unsigned long get_cmos_time(void) spin_lock(&sh03_rtc_lock); again: do { - sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10; - min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; - hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10; - day = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10; - mon = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10; - year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10 - + (ctrl_inb(RTC_YEA100 ) & 0xf) * 100 - + (ctrl_inb(RTC_YEA1000) & 0xf) * 1000; - } while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10); + sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10; + min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10; + hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10; + day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10; + mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10; + year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10 + + (__raw_readb(RTC_YEA100 ) & 0xf) * 100 + + (__raw_readb(RTC_YEA1000) & 0xf) * 1000; + } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10); if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 || hour > 23 || min > 59 || sec > 59) { printk(KERN_ERR @@ -60,16 +60,16 @@ unsigned long get_cmos_time(void) printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n", year, mon, day, hour, min, sec); - ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10); - ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10); - ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10); - ctrl_outb(6, RTC_WEE1); - ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10); - ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10); - ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10); - ctrl_outb(0, RTC_YEA100); - ctrl_outb(2, RTC_YEA1000); - ctrl_outb(0, RTC_CTL); + __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10); + __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10); + __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10); + __raw_writeb(6, RTC_WEE1); + __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10); + __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10); + __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10); + __raw_writeb(0, RTC_YEA100); + __raw_writeb(2, RTC_YEA1000); + __raw_writeb(0, RTC_CTL); goto again; } @@ -93,9 +93,9 @@ static int set_rtc_mmss(unsigned long nowtime) /* gets recalled with irq locally disabled */ spin_lock(&sh03_rtc_lock); for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ - if (!(ctrl_inb(RTC_CTL) & RTC_BUSY)) + if (!(__raw_readb(RTC_CTL) & RTC_BUSY)) break; - cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; + cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10; real_seconds = nowtime % 60; real_minutes = nowtime / 60; if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) @@ -103,10 +103,10 @@ static int set_rtc_mmss(unsigned long nowtime) real_minutes %= 60; if (abs(real_minutes - cmos_minutes) < 30) { - ctrl_outb(real_seconds % 10, RTC_SEC1); - ctrl_outb(real_seconds / 10, RTC_SEC10); - ctrl_outb(real_minutes % 10, RTC_MIN1); - ctrl_outb(real_minutes / 10, RTC_MIN10); + __raw_writeb(real_seconds % 10, RTC_SEC1); + __raw_writeb(real_seconds / 10, RTC_SEC10); + __raw_writeb(real_minutes % 10, RTC_MIN1); + __raw_writeb(real_minutes / 10, RTC_MIN10); } else { printk(KERN_WARNING "set_rtc_mmss: can't update from %d to %d\n", diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c index d8ebfa7d8c76..add698c8f2b4 100644 --- a/arch/sh/boards/mach-sh7763rdp/irq.c +++ b/arch/sh/boards/mach-sh7763rdp/irq.c @@ -28,18 +28,18 @@ void __init init_sh7763rdp_IRQ(void) { /* GPIO enabled */ - ctrl_outl(1 << 25, INTC_INT2MSKCR); + __raw_writel(1 << 25, INTC_INT2MSKCR); /* enable GPIO interrupts */ - ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, INTC_INT2PRI7); /* USBH enabled */ - ctrl_outl(1 << 17, INTC_INT2MSKCR1); + __raw_writel(1 << 17, INTC_INT2MSKCR1); /* GETHER enabled */ - ctrl_outl(1 << 16, INTC_INT2MSKCR1); + __raw_writel(1 << 16, INTC_INT2MSKCR1); /* DMAC enabled */ - ctrl_outl(1 << 8, INTC_INT2MSKCR); + __raw_writel(1 << 8, INTC_INT2MSKCR); } diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 390534a0b35c..f64a6918224c 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -158,50 +158,50 @@ device_initcall(sh7763rdp_devices_setup); static void __init sh7763rdp_setup(char **cmdline_p) { /* Board version check */ - if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) printk(KERN_INFO "RTE Standard Configuration\n"); else printk(KERN_INFO "RTA Standard Configuration\n"); /* USB pin select bits (clear bit 5-2 to 0) */ - ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); /* USBH setup port I controls to other (clear bits 4-9 to 0) */ - ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR); /* Select USB Host controller */ - ctrl_outw(0x00, USB_USBHSC); + __raw_writew(0x00, USB_USBHSC); /* For LCD */ /* set PTJ7-1, bits 15-2 of PJCR to 0 */ - ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR); /* set PTI5, bits 11-10 of PICR to 0 */ - ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); - ctrl_outw(0, PORT_PKCR); - ctrl_outw(0, PORT_PLCR); + __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR); + __raw_writew(0, PORT_PKCR); + __raw_writew(0, PORT_PLCR); /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ - ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ - ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3); /* For HAC */ /* bit3-0 0100:HAC & SSI1 enable */ - ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); /* bit14 1:SSI_HAC_CLK enable */ - ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4); /* SH-Ether */ - ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); - ctrl_outw(0x0, PORT_PFCR); - ctrl_outw(0x0, PORT_PFCR); - ctrl_outw(0x0, PORT_PFCR); + __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + __raw_writew(0x0, PORT_PFCR); + __raw_writew(0x0, PORT_PFCR); + __raw_writew(0x0, PORT_PFCR); /* MMC */ /*selects SCIF and MMC other functions */ - ctrl_outw(0x0001, PORT_PSEL0); + __raw_writew(0x0001, PORT_PSEL0); /* MMC clock operates */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); - ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); - ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); + __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1); + __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR); + __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); } static struct sh_machine_vector mv_sh7763rdp __initmv = { diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c index a3277a23cf14..331745dee379 100644 --- a/arch/sh/boards/mach-snapgear/setup.c +++ b/arch/sh/boards/mach-snapgear/setup.c @@ -30,7 +30,7 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - (void)ctrl_inb(0xb8000000); /* dummy read */ + (void)__raw_readb(0xb8000000); /* dummy read */ printk("SnapGear: erase switch interrupt!\n"); diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c index 986a0e71d220..523aea5dc94e 100644 --- a/arch/sh/boards/mach-systemh/irq.c +++ b/arch/sh/boards/mach-systemh/irq.c @@ -41,13 +41,13 @@ static void disable_systemh_irq(unsigned int irq) unsigned long val, mask = 0x01 << 1; /* Clear the "irq"th bit in the mask and set it in the request */ - val = ctrl_inl((unsigned long)systemh_irq_mask_register); + val = __raw_readl((unsigned long)systemh_irq_mask_register); val &= ~mask; - ctrl_outl(val, (unsigned long)systemh_irq_mask_register); + __raw_writel(val, (unsigned long)systemh_irq_mask_register); - val = ctrl_inl((unsigned long)systemh_irq_request_register); + val = __raw_readl((unsigned long)systemh_irq_request_register); val |= mask; - ctrl_outl(val, (unsigned long)systemh_irq_request_register); + __raw_writel(val, (unsigned long)systemh_irq_request_register); } } @@ -57,9 +57,9 @@ static void enable_systemh_irq(unsigned int irq) unsigned long val, mask = 0x01 << 1; /* Set "irq"th bit in the mask register */ - val = ctrl_inl((unsigned long)systemh_irq_mask_register); + val = __raw_readl((unsigned long)systemh_irq_mask_register); val |= mask; - ctrl_outl(val, (unsigned long)systemh_irq_mask_register); + __raw_writel(val, (unsigned long)systemh_irq_mask_register); } } diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c index 0130e9826aca..29754c5091f0 100644 --- a/arch/sh/boards/mach-titan/io.c +++ b/arch/sh/boards/mach-titan/io.c @@ -16,8 +16,8 @@ static inline unsigned int port2adr(unsigned int port) u8 titan_inb(unsigned long port) { if (PXSEG(port)) - return ctrl_inb(port); - return ctrl_inw(port2adr(port)) & 0xff; + return __raw_readb(port); + return __raw_readw(port2adr(port)) & 0xff; } u8 titan_inb_p(unsigned long port) @@ -25,9 +25,9 @@ u8 titan_inb_p(unsigned long port) u8 v; if (PXSEG(port)) - v = ctrl_inb(port); + v = __raw_readb(port); else - v = ctrl_inw(port2adr(port)) & 0xff; + v = __raw_readw(port2adr(port)) & 0xff; ctrl_delay(); return v; } @@ -35,9 +35,9 @@ u8 titan_inb_p(unsigned long port) u16 titan_inw(unsigned long port) { if (PXSEG(port)) - return ctrl_inw(port); + return __raw_readw(port); else if (port >= 0x2000) - return ctrl_inw(port2adr(port)); + return __raw_readw(port2adr(port)); else maybebadio(port); return 0; @@ -46,9 +46,9 @@ u16 titan_inw(unsigned long port) u32 titan_inl(unsigned long port) { if (PXSEG(port)) - return ctrl_inl(port); + return __raw_readl(port); else if (port >= 0x2000) - return ctrl_inw(port2adr(port)); + return __raw_readw(port2adr(port)); else maybebadio(port); return 0; @@ -57,26 +57,26 @@ u32 titan_inl(unsigned long port) void titan_outb(u8 value, unsigned long port) { if (PXSEG(port)) - ctrl_outb(value, port); + __raw_writeb(value, port); else - ctrl_outw(value, port2adr(port)); + __raw_writew(value, port2adr(port)); } void titan_outb_p(u8 value, unsigned long port) { if (PXSEG(port)) - ctrl_outb(value, port); + __raw_writeb(value, port); else - ctrl_outw(value, port2adr(port)); + __raw_writew(value, port2adr(port)); ctrl_delay(); } void titan_outw(u16 value, unsigned long port) { if (PXSEG(port)) - ctrl_outw(value, port); + __raw_writew(value, port); else if (port >= 0x2000) - ctrl_outw(value, port2adr(port)); + __raw_writew(value, port2adr(port)); else maybebadio(port); } @@ -84,7 +84,7 @@ void titan_outw(u16 value, unsigned long port) void titan_outl(u32 value, unsigned long port) { if (PXSEG(port)) - ctrl_outl(value, port); + __raw_writel(value, port); else maybebadio(port); } diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c index b5c673c39337..5c9842704c60 100644 --- a/arch/sh/boards/mach-x3proto/ilsel.c +++ b/arch/sh/boards/mach-x3proto/ilsel.c @@ -70,10 +70,10 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit) pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n", __func__, bit, addr, shift, set); - tmp = ctrl_inw(addr); + tmp = __raw_readw(addr); tmp &= ~(0xf << shift); tmp |= set << shift; - ctrl_outw(tmp, addr); + __raw_writew(tmp, addr); } /** @@ -142,9 +142,9 @@ void ilsel_disable(unsigned int irq) addr = mk_ilsel_addr(irq); - tmp = ctrl_inw(addr); + tmp = __raw_readw(addr); tmp &= ~(0xf << mk_ilsel_shift(irq)); - ctrl_outw(tmp, addr); + __raw_writew(tmp, addr); clear_bit(irq, &ilsel_level_map); } diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index efe4cb9f8a77..e284592fd42a 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -149,7 +149,7 @@ static void __init x3proto_init_irq(void) plat_irq_setup_pins(IRQ_MODE_IRL3210); /* Set ICR0.LVLMODE */ - ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000); + __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000); } static struct sh_machine_vector mv_x3proto __initmv = { -- cgit From f655f5e956eaf4fcda983f3b3d37c76371556c27 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 28 Jan 2010 15:08:21 +0900 Subject: sh: mach-titan: Kill off unused PIO port mangling. Nothing is using this, kill it off. Fixing up access sizes can be done with trapped I/O for anyone wanting to make use of this for devices that need it, everything else is already pure MMIO. Signed-off-by: Paul Mundt --- arch/sh/boards/Makefile | 1 + arch/sh/boards/board-titan.c | 24 +++++++++ arch/sh/boards/mach-titan/Makefile | 5 -- arch/sh/boards/mach-titan/io.c | 108 ------------------------------------- arch/sh/boards/mach-titan/setup.c | 44 --------------- 5 files changed, 25 insertions(+), 157 deletions(-) create mode 100644 arch/sh/boards/board-titan.c delete mode 100644 arch/sh/boards/mach-titan/Makefile delete mode 100644 arch/sh/boards/mach-titan/io.c delete mode 100644 arch/sh/boards/mach-titan/setup.c (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index ce0f26381784..4f90f9b7a922 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_SH_SHMIN) += board-shmin.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_POLARIS) += board-polaris.o +obj-$(CONFIG_SH_TITAN) += board-titan.o diff --git a/arch/sh/boards/board-titan.c b/arch/sh/boards/board-titan.c new file mode 100644 index 000000000000..94c36c7bc0b3 --- /dev/null +++ b/arch/sh/boards/board-titan.c @@ -0,0 +1,24 @@ +/* + * arch/sh/boards/titan/setup.c - Setup for Titan + * + * Copyright (C) 2006 Jamie Lenehan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +static void __init init_titan_irq(void) +{ + /* enable individual interrupt mode for externals */ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + +static struct sh_machine_vector mv_titan __initmv = { + .mv_name = "Titan", + .mv_init_irq = init_titan_irq, +}; diff --git a/arch/sh/boards/mach-titan/Makefile b/arch/sh/boards/mach-titan/Makefile deleted file mode 100644 index 08d753700062..000000000000 --- a/arch/sh/boards/mach-titan/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Nimble Microsystems TITAN specific parts of the kernel -# - -obj-y := setup.o io.o diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c deleted file mode 100644 index 29754c5091f0..000000000000 --- a/arch/sh/boards/mach-titan/io.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * I/O routines for Titan - */ -#include -#include -#include -#include -#include - -static inline unsigned int port2adr(unsigned int port) -{ - maybebadio((unsigned long)port); - return port; -} - -u8 titan_inb(unsigned long port) -{ - if (PXSEG(port)) - return __raw_readb(port); - return __raw_readw(port2adr(port)) & 0xff; -} - -u8 titan_inb_p(unsigned long port) -{ - u8 v; - - if (PXSEG(port)) - v = __raw_readb(port); - else - v = __raw_readw(port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -u16 titan_inw(unsigned long port) -{ - if (PXSEG(port)) - return __raw_readw(port); - else if (port >= 0x2000) - return __raw_readw(port2adr(port)); - else - maybebadio(port); - return 0; -} - -u32 titan_inl(unsigned long port) -{ - if (PXSEG(port)) - return __raw_readl(port); - else if (port >= 0x2000) - return __raw_readw(port2adr(port)); - else - maybebadio(port); - return 0; -} - -void titan_outb(u8 value, unsigned long port) -{ - if (PXSEG(port)) - __raw_writeb(value, port); - else - __raw_writew(value, port2adr(port)); -} - -void titan_outb_p(u8 value, unsigned long port) -{ - if (PXSEG(port)) - __raw_writeb(value, port); - else - __raw_writew(value, port2adr(port)); - ctrl_delay(); -} - -void titan_outw(u16 value, unsigned long port) -{ - if (PXSEG(port)) - __raw_writew(value, port); - else if (port >= 0x2000) - __raw_writew(value, port2adr(port)); - else - maybebadio(port); -} - -void titan_outl(u32 value, unsigned long port) -{ - if (PXSEG(port)) - __raw_writel(value, port); - else - maybebadio(port); -} - -void titan_insl(unsigned long port, void *dst, unsigned long count) -{ - maybebadio(port); -} - -void titan_outsl(unsigned long port, const void *src, unsigned long count) -{ - maybebadio(port); -} - -void __iomem *titan_ioport_map(unsigned long port, unsigned int size) -{ - if (PXSEG(port)) - return (void __iomem *)port; - - return (void __iomem *)port2adr(port); -} diff --git a/arch/sh/boards/mach-titan/setup.c b/arch/sh/boards/mach-titan/setup.c deleted file mode 100644 index 81e7e0f03863..000000000000 --- a/arch/sh/boards/mach-titan/setup.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/sh/boards/titan/setup.c - Setup for Titan - * - * Copyright (C) 2006 Jamie Lenehan - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -static void __init init_titan_irq(void) -{ - /* enable individual interrupt mode for externals */ - plat_irq_setup_pins(IRQ_MODE_IRQ); -} - -static struct sh_machine_vector mv_titan __initmv = { - .mv_name = "Titan", - - .mv_inb = titan_inb, - .mv_inw = titan_inw, - .mv_inl = titan_inl, - .mv_outb = titan_outb, - .mv_outw = titan_outw, - .mv_outl = titan_outl, - - .mv_inb_p = titan_inb_p, - .mv_inw_p = titan_inw, - .mv_inl_p = titan_inl, - .mv_outb_p = titan_outb_p, - .mv_outw_p = titan_outw, - .mv_outl_p = titan_outl, - - .mv_insl = titan_insl, - .mv_outsl = titan_outsl, - - .mv_ioport_map = titan_ioport_map, - - .mv_init_irq = init_titan_irq, -}; -- cgit From 97b19778ee5dd0484493f12f6a9cf9391cf0aefb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 30 Jan 2010 11:04:38 +0900 Subject: sh: mach-se: Fix up irq_desc reference. The irq_desc needs to be accessed with irq_to_desc(), this fixes up a build error with irq_desc being undefined. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7206/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 79be4bc59933..8d82175d83ab 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -89,8 +89,9 @@ static void enable_se7206_irq(unsigned int irq) static void eoi_se7206_irq(unsigned int irq) { unsigned short sts0,sts1; + struct irq_desc *desc = irq_to_desc(irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) enable_se7206_irq(irq); /* FPGA isr clear */ sts0 = __raw_readw(INTSTS0); -- cgit From c7a967273a539a9a38413753c58125e777e2d30d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 2 Feb 2010 17:38:04 +0900 Subject: sh: mach-se: Convert SH7724 solution engine FPGA to sparseirq. This uses the new create_irq_nr() to build up the FPGA's desired virtual IRQ mapping and permits us to finally flip on sparseirq for this board. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/irq.c | 38 +++++++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 11 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index e5e021a7d1e6..0942be2daef6 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -93,18 +93,15 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) { struct fpga_irq set = get_fpga_irq(irq); unsigned short intv = __raw_readw(set.sraddr); - struct irq_desc *ext_desc; unsigned int ext_irq = set.base; intv &= set.mask; - while (intv) { - if (intv & 0x0001) { - ext_desc = irq_desc + ext_irq; - handle_level_irq(ext_irq, ext_desc); - } - intv >>= 1; - ext_irq++; + for (; intv; intv >>= 1, ext_irq++) { + if (!(intv & 1)) + continue; + + generic_handle_irq(ext_irq); } } @@ -113,7 +110,7 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) */ void __init init_se7724_IRQ(void) { - int i; + int i, nid = cpu_to_node(boot_cpu_data); __raw_writew(0xffff, IRQ0_MR); /* mask all */ __raw_writew(0xffff, IRQ1_MR); /* mask all */ @@ -123,10 +120,29 @@ void __init init_se7724_IRQ(void) __raw_writew(0x0000, IRQ2_SR); /* clear irq */ __raw_writew(0x002a, IRQ_MODE); /* set irq type */ - for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) - set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i, + for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) { + int irq, wanted; + + wanted = SE7724_FPGA_IRQ_BASE + i; + + irq = create_irq_nr(wanted, nid); + if (unlikely(irq == 0)) { + pr_err("%s: failed hooking irq %d for FPGA\n", + __func__, wanted); + return; + } + + if (unlikely(irq != wanted)) { + pr_err("%s: got irq %d but wanted %d, bailing.\n", + __func__, irq, wanted); + destroy_irq(irq); + return; + } + + set_irq_chip_and_handler_name(irq, &se7724_irq_chip, handle_level_irq, "level"); + } set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux); set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); -- cgit From deb9b22b8968fa0166d89c8ad1346e816cf1aec4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 2 Feb 2010 18:01:55 +0900 Subject: sh: mach-dreamcast: Convert to sparseirq. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-dreamcast/irq.c | 27 +++++++++++++++++++++++++++ arch/sh/boards/mach-dreamcast/setup.c | 18 +----------------- 2 files changed, 28 insertions(+), 17 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index f55fc8e795e9..d932667410ab 100644 --- a/arch/sh/boards/mach-dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -135,3 +135,30 @@ int systemasic_irq_demux(int irq) /* Not reached */ return irq; } + +void systemasic_irq_init(void) +{ + int i, nid = cpu_to_node(boot_cpu_data); + + /* Assign all virtual IRQs to the System ASIC int. handler */ + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) { + unsigned int irq; + + irq = create_irq_nr(i, nid); + if (unlikely(irq == 0)) { + pr_err("%s: failed hooking irq %d for systemasic\n", + __func__, i); + return; + } + + if (unlikely(irq != i)) { + pr_err("%s: got irq %d but wanted %d, bailing.\n", + __func__, irq, i); + destroy_irq(irq); + return; + } + + set_irq_chip_and_handler(i, &systemasic_int, + handle_level_irq); + } +} diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c index a4b7402d6176..ad1a4db72e04 100644 --- a/arch/sh/boards/mach-dreamcast/setup.c +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -28,25 +28,8 @@ #include #include -extern struct irq_chip systemasic_int; -extern void aica_time_init(void); -extern int systemasic_irq_demux(int); - static void __init dreamcast_setup(char **cmdline_p) { - int i; - - /* Mask all hardware events */ - /* XXX */ - - /* Acknowledge any previous events */ - /* XXX */ - - /* Assign all virtual IRQs to the System ASIC int. handler */ - for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) - set_irq_chip_and_handler(i, &systemasic_int, - handle_level_irq); - board_time_init = aica_time_init; } @@ -54,4 +37,5 @@ static struct sh_machine_vector mv_dreamcast __initmv = { .mv_name = "Sega Dreamcast", .mv_setup = dreamcast_setup, .mv_irq_demux = systemasic_irq_demux, + .mv_init_irq = systemasic_irq_init, }; -- cgit From 8d9adabac3a3a3742c7a47da9e456108a0fd2efb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 9 Feb 2010 06:49:48 +0000 Subject: sh: sh7722/Migo-R SDHI vector merge Merge the SDHI vectors in the sh7722 INTC table and update the SDHI platform data for Migo-R. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-migor/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index ed2eeeb390a5..d1e51a9baf9c 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -397,7 +397,7 @@ static struct resource sdhi_cn9_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; -- cgit From e3e80046e0ce2a595e607a62b650a9b4efea6558 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 9 Feb 2010 06:49:56 +0000 Subject: sh: sh7723/AP325 SDHI vector merge Merge the SDHI vectors in the sh7723 INTC table and update the SDHI platform data for AP325. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 27277cbdb636..b5980696abbe 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -420,7 +420,7 @@ static struct resource sdhi0_cn3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; @@ -443,7 +443,7 @@ static struct resource sdhi1_cn7_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 24, + .start = 23, .flags = IORESOURCE_IRQ, }, }; -- cgit From 3844eadcfd2ba975110e3ca8479efa8c093129ce Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 9 Feb 2010 06:50:04 +0000 Subject: sh: sh7724/Ecovec24/KFR2R09/MS7724SE SDHI vector merge Merge the SDHI vectors in the sh7724 INTC table and update the SDHI platform data for Ecovec24, KFR2R09 and MS7724SE. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 4 ++-- arch/sh/boards/mach-kfr2r09/setup.c | 2 +- arch/sh/boards/mach-se/7724/setup.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 1135c3b848f2..8e3b05f93a65 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -453,7 +453,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; @@ -489,7 +489,7 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 24, + .start = 23, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index ca9e82d77d0a..b2cd0ed8664e 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -351,7 +351,7 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c7dbbece44b0..50e4d1599576 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -451,7 +451,7 @@ static struct resource sdhi0_cn7_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; @@ -474,7 +474,7 @@ static struct resource sdhi1_cn8_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 24, + .start = 23, .flags = IORESOURCE_IRQ, }, }; -- cgit From 6f26d19fce5907cdd0fd953ac1a1d0b1e6e5982c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 19 Feb 2010 09:33:47 +0000 Subject: sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 8e3b05f93a65..a17dbb3ac73f 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -1121,6 +1121,11 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_INTC_IRQ1, NULL); gpio_direction_input(GPIO_FN_INTC_IRQ1); + /* set VPU clock to 166 MHz */ + clk = clk_get(NULL, "vpu_clk"); + clk_set_rate(clk, clk_round_rate(clk, 166000000)); + clk_put(clk); + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); -- cgit From 16afc9fb0298a66da25ee015eb3c8a8f55e3744a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 22 Feb 2010 05:18:10 +0000 Subject: sh: sh7724: Update FSI/SPU2 clock When FSI and Network (= NFS file system) were used at the same time, the I/O of FSI was unstable. This patch updates the SPU2 clock (which is used for FSI) to solve this issue. Special thanks to Jeremy. Signed-off-by: Jeremy Baker Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 5 +++++ arch/sh/boards/mach-se/7724/setup.c | 15 ++++++++++----- 2 files changed, 15 insertions(+), 5 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index a17dbb3ac73f..6f2e8a78b461 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -1105,6 +1105,11 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_FSIOBLRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOBO, NULL); + /* set SPU2 clock to 83.4 MHz */ + clk = clk_get(NULL, "spu_clk"); + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); clk_register(&fsimckb_clk); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 50e4d1599576..1f6cf8604943 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -586,7 +586,7 @@ arch_initcall(arch_setup); static int __init devices_setup(void) { u16 sw = __raw_readw(SW4140); /* select camera, monitor */ - struct clk *fsia_clk; + struct clk *clk; /* register board specific self-refresh code */ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, @@ -755,13 +755,18 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_CLKAUDIOBO, NULL); gpio_request(GPIO_FN_FSIIASD, NULL); + /* set SPU2 clock to 83.4 MHz */ + clk = clk_get(NULL, "spu_clk"); + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + /* change parent of FSI A */ - fsia_clk = clk_get(NULL, "fsia_clk"); + clk = clk_get(NULL, "fsia_clk"); clk_register(&fsimcka_clk); - clk_set_parent(fsia_clk, &fsimcka_clk); - clk_set_rate(fsia_clk, 11000); + clk_set_parent(clk, &fsimcka_clk); + clk_set_rate(clk, 11000); clk_set_rate(&fsimcka_clk, 11000); - clk_put(fsia_clk); + clk_put(clk); /* SDHI0 connected to cn7 */ gpio_request(GPIO_FN_SDHI0CD, NULL); -- cgit From 263657168549075b57ecfbf730738105d1af8b65 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 24 Feb 2010 00:32:28 +0000 Subject: sh: mach-ecovec24: Add sh_sir support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 6f2e8a78b461..8cdf11e00ee6 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -751,6 +751,26 @@ static struct platform_device fsi_device = { }, }; +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .name = "IrDA", + .start = 0xA45D0000, + .end = 0xA45D0049, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_sir", + .num_resources = ARRAY_SIZE(irda_resources), + .resource = irda_resources, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -771,6 +791,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[1], &camera_devices[2], &fsi_device, + &irda_device, }; #define EEPROM_ADDR 0x50 @@ -1131,6 +1152,12 @@ static int __init arch_setup(void) clk_set_rate(clk, clk_round_rate(clk, 166000000)); clk_put(clk); + /* enable IrDA */ + gpio_request(GPIO_FN_IRDA_OUT, NULL); + gpio_request(GPIO_FN_IRDA_IN, NULL); + gpio_request(GPIO_PTU5, NULL); + gpio_direction_output(GPIO_PTU5, 0); + /* enable I2C device */ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); -- cgit From bbb892aac4724b7cc6e1626665310eddfd747235 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 23 Feb 2010 08:19:14 +0000 Subject: sh: ms7724: Add sh_sir support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 1f6cf8604943..6419f27a9ef2 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -489,6 +489,26 @@ static struct platform_device sdhi1_cn8_device = { }, }; +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .name = "IrDA", + .start = 0xA45D0000, + .end = 0xA45D0049, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_sir", + .num_resources = ARRAY_SIZE(irda_resources), + .resource = irda_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -503,6 +523,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { &fsi_device, &sdhi0_cn7_device, &sdhi1_cn8_device, + &irda_device, }; /* I2C device */ @@ -599,6 +620,7 @@ static int __init devices_setup(void) ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ (1 << 7) | /* AK4643 */ + (1 << 8) | /* IrDA */ (1 << 12) | /* USB0 */ (1 << 14)), /* RMII */ FPGA_OUT); @@ -788,6 +810,10 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_SDHI1CMD, NULL); gpio_request(GPIO_FN_SDHI1CLK, NULL); + /* enable IrDA */ + gpio_request(GPIO_FN_IRDA_OUT, NULL); + gpio_request(GPIO_FN_IRDA_IN, NULL); + /* * enable SH-Eth * -- cgit From 29463c28a553e1959ec45cc8ad9d2eb434663cdf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 24 Feb 2010 00:16:47 +0000 Subject: sh: ms7724: modify scan_timing for KEYSC KEYSC::SCN register of SH7724 is 3bit. Thus, scan_timing should be 0 - 7 here. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 6419f27a9ef2..ee5251f92811 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -313,7 +313,7 @@ static struct platform_device fsi_device = { /* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, - .scan_timing = 10, + .scan_timing = 3, .delay = 50, .keycodes = { KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, -- cgit From b67cf2848af1cf4a4c9c277429092ae59adf859b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Feb 2010 11:06:02 +0000 Subject: sh: ms7724se r-standby support This patch adds board specific r-standby resume code for ms7724se. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/sdram.S | 79 +++++++++++++++++++++++++++++++++++++ arch/sh/boards/mach-se/7724/setup.c | 3 +- 2 files changed, 81 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S index 9040167d5022..6fa4734d09c7 100644 --- a/arch/sh/boards/mach-se/7724/sdram.S +++ b/arch/sh/boards/mach-se/7724/sdram.S @@ -39,6 +39,10 @@ ENTRY(ms7724se_sdram_leave_start) /* DBSC: put memory in auto-refresh mode */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_RSTANDBY, r0 + bf resume_rstandby + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ WAIT 1 ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ @@ -49,4 +53,79 @@ ENTRY(ms7724se_sdram_leave_start) rts nop +resume_rstandby: + + /* CPG: setup clocks before restarting external memory */ + + ED 0xA4150024, 0x00004000 /* PLLCR */ + + mov.l FRQCRA,r0 + mov.l @r0,r3 + mov.l KICK,r1 + or r1, r3 + mov.l r3, @r0 + + mov.l LSTATS,r0 + mov #1,r1 +WAIT_LSTATS: + mov.l @r0,r3 + tst r1,r3 + bf WAIT_LSTATS + + /* DBSC: re-initialize and put in auto-refresh */ + + ED 0xFD000108, 0x00000181 /* DBPDCNT0 */ + ED 0xFD000020, 0x015B0002 /* DBCONF */ + ED 0xFD000030, 0x03071502 /* DBTR0 */ + ED 0xFD000034, 0x02020102 /* DBTR1 */ + ED 0xFD000038, 0x01090405 /* DBTR2 */ + ED 0xFD00003C, 0x00000002 /* DBTR3 */ + ED 0xFD000008, 0x00000005 /* DBKIND */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000018, 0x00000001 /* DBCKECNT */ + + mov #100,r0 +WAIT_400NS: + dt r0 + bf WAIT_400NS + + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */ + ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */ + ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */ + ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */ + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */ + ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */ + ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */ + + mov #100,r0 +WAIT_400NS_2: + dt r0 + bf WAIT_400NS_2 + + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000044, 0x0000050f /* DBRFPDN1 */ + ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */ + + mov.l DUMMY,r0 + mov.l @r0, r1 /* force single dummy read */ + + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000108, 0x00000080 /* DBPDCNT0 */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + + .balign 4 +DUMMY: .long 0xac400000 +FRQCRA: .long 0xa4150000 +KICK: .long 0x80000000 +LSTATS: .long 0xa4150060 + ENTRY(ms7724se_sdram_leave_end) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index ee5251f92811..563f3dcb1f9b 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -610,7 +610,8 @@ static int __init devices_setup(void) struct clk *clk; /* register board specific self-refresh code */ - sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | + SUSP_SH_RSTANDBY, &ms7724se_sdram_enter_start, &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, -- cgit From 2839bd61f671d3debf9ef0893a0470fd97b2e2ce Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Feb 2010 11:07:52 +0000 Subject: sh: ecovec r-standby support This patch adds board specific r-standby resume code for ecovec. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/sdram.S | 59 ++++++++++++++++++++++++++++++++++++ arch/sh/boards/mach-ecovec24/setup.c | 3 +- 2 files changed, 61 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S index 833440044407..3963c6f23d52 100644 --- a/arch/sh/boards/mach-ecovec24/sdram.S +++ b/arch/sh/boards/mach-ecovec24/sdram.S @@ -37,6 +37,10 @@ ENTRY(ecovec24_sdram_enter_end) .balign 4 ENTRY(ecovec24_sdram_leave_start) + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_RSTANDBY, r0 + bf resume_rstandby + /* DBSC: put memory in auto-refresh mode */ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ @@ -49,4 +53,59 @@ ENTRY(ecovec24_sdram_leave_start) rts nop +resume_rstandby: + + /* DBSC: re-initialize and put in auto-refresh */ + + ED 0xFD000108, 0x00000181 /* DBPDCNT0 */ + ED 0xFD000020, 0x015B0002 /* DBCONF */ + ED 0xFD000030, 0x03071502 /* DBTR0 */ + ED 0xFD000034, 0x02020102 /* DBTR1 */ + ED 0xFD000038, 0x01090405 /* DBTR2 */ + ED 0xFD00003C, 0x00000002 /* DBTR3 */ + ED 0xFD000008, 0x00000005 /* DBKIND */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000018, 0x00000001 /* DBCKECNT */ + + mov #100,r0 +WAIT_400NS: + dt r0 + bf WAIT_400NS + + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */ + ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */ + ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */ + ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */ + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */ + ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */ + ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */ + + mov #100,r0 +WAIT_400NS_2: + dt r0 + bf WAIT_400NS_2 + + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000044, 0x0000050f /* DBRFPDN1 */ + ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */ + + mov.l DUMMY,r0 + mov.l @r0, r1 /* force single dummy read */ + + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000108, 0x00000080 /* DBPDCNT0 */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + + .balign 4 +DUMMY: .long 0xac400000 + ENTRY(ecovec24_sdram_leave_end) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 8cdf11e00ee6..3248406ea7ff 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -850,7 +850,8 @@ static int __init arch_setup(void) struct clk *clk; /* register board specific self-refresh code */ - sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | + SUSP_SH_RSTANDBY, &ecovec24_sdram_enter_start, &ecovec24_sdram_enter_end, &ecovec24_sdram_leave_start, -- cgit From 6b3b55750b0de4a4ff2742efd34ff74665fa4e2f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Feb 2010 11:10:54 +0000 Subject: sh: ecovec build fix for CONFIG_I2C=n Allow building the ecovec board support code even though I2C support is disabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 3248406ea7ff..39ed8722d11a 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -794,6 +794,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &irda_device, }; +#ifdef CONFIG_I2C #define EEPROM_ADDR 0x50 static u8 mac_read(struct i2c_adapter *a, u8 command) { @@ -836,6 +837,12 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) msleep(10); } } +#else +static void __init sh_eth_init(struct sh_eth_plat_data *pd) +{ + pr_err("unable to read sh_eth MAC address\n"); +} +#endif #define PORT_HIZA 0xA4050158 #define IODRIVEA 0xA405018A -- cgit From b5f5fe80fa98a60daa0fa94512d1599b1e26674c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Feb 2010 11:14:28 +0000 Subject: sh: remove dead LED code for migo-r and ms7724se CONFIG_PM is always set on SH-Mobile these days so get rid of the unused LED setup code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-migor/setup.c | 12 ------------ arch/sh/boards/mach-se/7724/setup.c | 17 ----------------- 2 files changed, 29 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index d1e51a9baf9c..e08d5132bb1e 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -496,23 +496,11 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); -#ifdef CONFIG_PM /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); /* Lit D12 LED show PDSTATUS */ gpio_request(GPIO_FN_PDSTATUS, NULL); -#else - /* Lit D11 LED */ - gpio_request(GPIO_PTJ7, NULL); - gpio_direction_output(GPIO_PTJ7, 1); - gpio_export(GPIO_PTJ7, 0); - - /* Lit D12 LED */ - gpio_request(GPIO_PTJ5, NULL); - gpio_direction_output(GPIO_PTJ5, 1); - gpio_export(GPIO_PTJ5, 0); -#endif /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */ gpio_request(GPIO_FN_IRQ0, NULL); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 563f3dcb1f9b..66cdbc3c7af9 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -629,7 +629,6 @@ static int __init devices_setup(void) /* turn on USB clocks, use external clock */ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); -#ifdef CONFIG_PM /* Let LED9 show STATUS2 */ gpio_request(GPIO_FN_STATUS2, NULL); @@ -638,22 +637,6 @@ static int __init devices_setup(void) /* Lit LED11 show PDSTATUS */ gpio_request(GPIO_FN_PDSTATUS, NULL); -#else - /* Lit LED9 */ - gpio_request(GPIO_PTJ6, NULL); - gpio_direction_output(GPIO_PTJ6, 1); - gpio_export(GPIO_PTJ6, 0); - - /* Lit LED10 */ - gpio_request(GPIO_PTJ5, NULL); - gpio_direction_output(GPIO_PTJ5, 1); - gpio_export(GPIO_PTJ5, 0); - - /* Lit LED11 */ - gpio_request(GPIO_PTJ7, NULL); - gpio_direction_output(GPIO_PTJ7, 1); - gpio_export(GPIO_PTJ7, 0); -#endif /* enable USB0 port */ __raw_writew(0x0600, 0xa40501d4); -- cgit