From 32231a66b4e1b649c346dc76b7d191f7e64a663a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 21 Jul 2007 19:18:57 -0700 Subject: [SPARC32]: clean include/asm-sparc/irq.h Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h and into individual files in there (e.g. macros internal to sun4m_irq.c, etc.) Signed-off-by: Al Viro Signed-off-by: David S. Miller --- arch/sparc/kernel/sun4m_irq.c | 74 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) (limited to 'arch/sparc/kernel/sun4m_irq.c') diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 91a803ea88be..b92d6d2d5b04 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -38,11 +38,85 @@ #include #include +#include "irq.h" + +/* On the sun4m, just like the timers, we have both per-cpu and master + * interrupt registers. + */ + +/* These registers are used for sending/receiving irqs from/to + * different cpu's. + */ +struct sun4m_intreg_percpu { + unsigned int tbt; /* Interrupts still pending for this cpu. */ + + /* These next two registers are WRITE-ONLY and are only + * "on bit" sensitive, "off bits" written have NO affect. + */ + unsigned int clear; /* Clear this cpus irqs here. */ + unsigned int set; /* Set this cpus irqs here. */ + unsigned char space[PAGE_SIZE - 12]; +}; + +/* + * djhr + * Actually the clear and set fields in this struct are misleading.. + * according to the SLAVIO manual (and the same applies for the SEC) + * the clear field clears bits in the mask which will ENABLE that IRQ + * the set field sets bits in the mask to DISABLE the IRQ. + * + * Also the undirected_xx address in the SLAVIO is defined as + * RESERVED and write only.. + * + * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor + * sun4m machines, for MP the layout makes more sense. + */ +struct sun4m_intregs { + struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS]; + unsigned int tbt; /* IRQ's that are still pending. */ + unsigned int irqs; /* Master IRQ bits. */ + + /* Again, like the above, two these registers are WRITE-ONLY. */ + unsigned int clear; /* Clear master IRQ's by setting bits here. */ + unsigned int set; /* Set master IRQ's by setting bits here. */ + + /* This register is both READ and WRITE. */ + unsigned int undirected_target; /* Which cpu gets undirected irqs. */ +}; + static unsigned long dummy; struct sun4m_intregs *sun4m_interrupts; unsigned long *irq_rcvreg = &dummy; +/* Dave Redman (djhr@tadpole.co.uk) + * The sun4m interrupt registers. + */ +#define SUN4M_INT_ENABLE 0x80000000 +#define SUN4M_INT_E14 0x00000080 +#define SUN4M_INT_E10 0x00080000 + +#define SUN4M_HARD_INT(x) (0x000000001 << (x)) +#define SUN4M_SOFT_INT(x) (0x000010000 << (x)) + +#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ +#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ +#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */ +#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */ +#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ +#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ +#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ +#define SUN4M_INT_REALTIME 0x00080000 /* system timer */ +#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */ +#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */ +#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */ +#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ +#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ +#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ + +#define SUN4M_INT_SBUS(x) (1 << (x+7)) +#define SUN4M_INT_VME(x) (1 << (x)) + /* These tables only apply for interrupts greater than 15.. * * any intr value below 0x10 is considered to be a soft-int -- cgit