From 1b1e8e024b9ea4c07e05a44b9aeb48d5d89a06e0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Mar 2016 15:29:30 +0100 Subject: ARM: dts: ux500: use the GPIO DT header Use the header instead of using hardcoded values for the GPIO flags. Eradicate the totally bogus "0x4" flag used and set that to GPIO_ACTIVE_HIGH as is proper, switch the inverted card detect on the Snowball to flag using GPIO_ACTIVE_LOW instead of using the MMC-specific inversion flag. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-ccu9540.dts | 2 +- arch/arm/boot/dts/ste-dbx5x0.dtsi | 1 + arch/arm/boot/dts/ste-href-stuib.dtsi | 4 ++-- arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 4 ++-- arch/arm/boot/dts/ste-hrefprev60.dtsi | 8 ++++---- arch/arm/boot/dts/ste-hrefv60plus.dtsi | 6 +++--- arch/arm/boot/dts/ste-snowball.dts | 19 +++++++++---------- 7 files changed, 22 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index c8b815819cfe..b3b9bb8e1aa8 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -49,7 +49,7 @@ cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; - cd-gpios = <&gpio7 6 0x4>; // 230 + cd-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; // 230 cd-inverted; status = "okay"; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 341f5b7ed242..d85830d80252 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include #include "skeleton.dtsi" / { diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index c3987ad06d79..6f720756057d 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -22,13 +22,13 @@ button@139 { /* Proximity sensor */ - gpios = <&gpio6 25 0x4>; + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; linux,code = <11>; /* SW_FRONT_PROXIMITY */ label = "SFH7741 Proximity Sensor"; }; button@145 { /* Hall sensor */ - gpios = <&gpio4 17 0x4>; + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; linux,code = <0>; /* SW_LID */ label = "HED54XXU11 Hall Effect Sensor"; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 55f9d0cc90f3..54d80da2a5df 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -24,13 +24,13 @@ button@139 { /* Proximity sensor */ - gpios = <&gpio6 25 0x4>; + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; linux,code = <11>; /* SW_FRONT_PROXIMITY */ label = "SFH7741 Proximity Sensor"; }; button@145 { /* Hall sensor */ - gpios = <&gpio4 17 0x4>; + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; linux,code = <0>; /* SW_LID */ label = "HED54XXU11 Hall Effect Sensor"; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index b0278f4c486c..ece222d51717 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -18,7 +18,7 @@ / { gpio_keys { button@1 { - gpios = <&tc3589x_gpio 7 0x4>; + gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>; }; }; @@ -68,12 +68,12 @@ // External Micro SD slot sdi0_per1@80126000 { - cd-gpios = <&tc3589x_gpio 3 0x4>; + cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; }; vmmci: regulator-gpio { - gpios = <&tc3589x_gpio 18 0x4>; - enable-gpio = <&tc3589x_gpio 17 0x4>; + gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 149a72e7e37a..45d7af326718 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -20,12 +20,12 @@ soc { // External Micro SD slot sdi0_per1@80126000 { - cd-gpios = <&gpio2 31 0x4>; // 95 + cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; vmmci: regulator-gpio { - gpios = <&gpio0 5 0x4>; - enable-gpio = <&gpio5 9 0x4>; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 08f82077b64d..36e84efc401c 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -50,35 +50,35 @@ wakeup-source; linux,code = <2>; label = "userpb"; - gpios = <&gpio1 0 0x4>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; }; button@2 { debounce_interval = <50>; wakeup-source; linux,code = <3>; label = "extkb1"; - gpios = <&gpio4 23 0x4>; + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; }; button@3 { debounce_interval = <50>; wakeup-source; linux,code = <4>; label = "extkb2"; - gpios = <&gpio4 24 0x4>; + gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; }; button@4 { debounce_interval = <50>; wakeup-source; linux,code = <5>; label = "extkb3"; - gpios = <&gpio5 1 0x4>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; button@5 { debounce_interval = <50>; wakeup-source; linux,code = <6>; label = "extkb4"; - gpios = <&gpio5 2 0x4>; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; }; }; @@ -88,7 +88,7 @@ pinctrl-0 = <&gpioled_snowball_mode>; used-led { label = "user_led"; - gpios = <&gpio4 14 0x4>; + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; @@ -155,8 +155,8 @@ vmmci: regulator-gpio { compatible = "regulator-gpio"; - gpios = <&gpio7 4 0x4>; - enable-gpio = <&gpio6 25 0x4>; + gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; @@ -182,8 +182,7 @@ pinctrl-0 = <&sdi0_default_mode>; pinctrl-1 = <&sdi0_sleep_mode>; - cd-gpios = <&gpio6 26 0x4>; // 218 - cd-inverted; + cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218 status = "okay"; }; -- cgit