From 41b39ea19087ca91729972d6497af7fdfaef7449 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 23 Aug 2016 21:27:16 +1000 Subject: m68knommu: switch to using IO access methods in WildFire board code Most ColdFire support code has switched to using IO memory access methods (readb/writeb/etc) when reading and writing internal peripheral device registers. The WildFire board specific halt code was missed. As it is now the WildFire code is broken, since all register definitions were changed to be register addresses only some time ago. Fix the WildFire board code to use the appropriate IO access functions. Signed-off-by: Greg Ungerer --- arch/m68k/coldfire/m528x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/coldfire/m528x.c b/arch/m68k/coldfire/m528x.c index 45e947aeade4..12f9e370d8dd 100644 --- a/arch/m68k/coldfire/m528x.c +++ b/arch/m68k/coldfire/m528x.c @@ -102,14 +102,14 @@ void wildfiremod_halt(void) printk(KERN_INFO "WildFireMod hibernating...\n"); /* Set portE.5 to Digital IO */ - MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2)); + writew(readw(MCFGPIO_PEPAR) & ~(1 << (5 * 2)), MCFGPIO_PEPAR); /* Make portE.5 an output */ - MCF5282_GPIO_DDRE |= (1 << 5); + writeb(readb(MCFGPIO_PDDR_E) | (1 << 5), MCFGPIO_PDDR_E); /* Now toggle portE.5 from low to high */ - MCF5282_GPIO_PORTE &= ~(1 << 5); - MCF5282_GPIO_PORTE |= (1 << 5); + writeb(readb(MCFGPIO_PODR_E) & ~(1 << 5), MCFGPIO_PODR_E); + writeb(readb(MCFGPIO_PODR_E) | (1 << 5), MCFGPIO_PODR_E); printk(KERN_EMERG "Failed to hibernate. Halting!\n"); } -- cgit