From 6a24768c6e301a48c0610f0fac6f4461750ebf16 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 11 Jul 2022 15:46:55 +0200 Subject: arm64: dts: renesas: r8a779f0: Add SDHI0 support Extracted from a larger BSP patch made by Linh Phung. Signed-off-by: Wolfram Sang Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20220711134656.277730-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 384817ffa4de..0c59a93cbaaa 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -670,6 +670,19 @@ <&ipmmu_ds0 30>, <&ipmmu_ds0 31>; }; + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a779f0", + "renesas,rcar-gen4-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779F0_CLK_SD0H>; + clock-names = "core", "clkh"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 706>; + max-frequency = <200000000>; + status = "disabled"; + }; + ipmmu_rt0: iommu@ee480000 { compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; -- cgit From 1ada3e53b78afc03d30f5fd7e9d54f297d09cf61 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 11 Jul 2022 15:46:56 +0200 Subject: arm64: dts: renesas: spider-cpu: Enable eMMC0 This enables the on-board eMMC on the Spider board. Switch SW3 has to be in the default (neutral) position. Other settings will not be supported upstream! Signed-off-by: Wolfram Sang Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20220711134656.277730-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- .../boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 28fbf7bc1eb4..4a876d47f59b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -21,6 +21,24 @@ device_type = "memory"; reg = <0x4 0x80000000 0x0 0x80000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &extal_clk { @@ -46,6 +64,27 @@ }; }; +/* + * This board also has a microSD slot which we will not support upstream + * because we cannot directly switch voltages in software. + */ +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; @@ -55,6 +94,12 @@ function = "i2c4"; }; + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + scif0_pins: scif0 { groups = "scif0_data", "scif0_ctrl"; function = "scif0"; -- cgit From d227fcc390e3e995fb8b0cd1d63f8be0ad2b47d3 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 13 Jul 2022 12:14:46 +0200 Subject: arm64: dts: renesas: r8a779f0: Add CMT support This patch adds CMT{0|1|2|3} device nodes for R-Car S4-8 (r8a779f0) SoC. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220713101447.3804-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 70 +++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 0c59a93cbaaa..5aff5a23cf06 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -301,6 +301,76 @@ #interrupt-cells = <2>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a779f0-cmt0", + "renesas,rcar-gen4-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 910>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 910>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a779f0-cmt1", + "renesas,rcar-gen4-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 911>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 911>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a779f0-cmt1", + "renesas,rcar-gen4-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 912>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 912>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a779f0-cmt1", + "renesas,rcar-gen4-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 913>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 913>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779f0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; -- cgit From 5edc51af5b304a91a957b862d150cd8a89c4aa97 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 18 Jul 2022 20:56:47 +0100 Subject: arm64: dts: renesas: r9a07g044: Add IRQC node Add IRQC node to R9A07G044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220718195651.7711-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 55 ++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 3652e511160f..46fb3d83592a 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -646,6 +646,61 @@ <&cpg R9A07G044_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g044-irqc", + "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x110a0000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_IA55_RESETN>; + }; + dmac: dma-controller@11820000 { compatible = "renesas,r9a07g044-dmac", "renesas,rz-dmac"; -- cgit From 989fd5a7fb7927da37a004cce5336e3940a842e1 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 18 Jul 2022 20:56:48 +0100 Subject: arm64: dts: renesas: r9a07g044: Update pinctrl node to handle GPIO interrupts Add required properties in pinctrl node to handle GPIO interrupts. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220718195651.7711-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 46fb3d83592a..cfdcca1cf9c6 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -638,6 +638,10 @@ reg = <0 0x11030000 0 0x10000>; gpio-controller; #gpio-cells = <2>; + #address-cells = <2>; + #interrupt-cells = <2>; + interrupt-parent = <&irqc>; + interrupt-controller; gpio-ranges = <&pinctrl 0 0 392>; clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; power-domains = <&cpg>; -- cgit From 379478ab09e0c25709e804b732ee7910d14a3972 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 18 Jul 2022 20:56:49 +0100 Subject: arm64: dts: renesas: r9a07g054: Add IRQC node Add IRQC node to R9A07G054 (RZ/V2L) SoC DTSI. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220718195651.7711-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 55 ++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 4d6b9d7684c9..4b8a09abfc7f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -652,6 +652,61 @@ <&cpg R9A07G054_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g054-irqc", + "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x110a0000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>, + <&cpg CPG_MOD R9A07G054_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_IA55_RESETN>; + }; + dmac: dma-controller@11820000 { compatible = "renesas,r9a07g054-dmac", "renesas,rz-dmac"; -- cgit From b2c9af5f47522ae9a6665e98d5ff657972a4db97 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 18 Jul 2022 20:56:50 +0100 Subject: arm64: dts: renesas: r9a07g054: Update pinctrl node to handle GPIO interrupts Add required properties in pinctrl node to handle GPIO interrupts. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220718195651.7711-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 4b8a09abfc7f..24611e4a7913 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -644,6 +644,10 @@ reg = <0 0x11030000 0 0x10000>; gpio-controller; #gpio-cells = <2>; + #address-cells = <2>; + #interrupt-cells = <2>; + interrupt-parent = <&irqc>; + interrupt-controller; gpio-ranges = <&pinctrl 0 0 392>; clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>; power-domains = <&cpg>; -- cgit From 456b6dd1baadd2da10e28ffd1717b06d1fa17a97 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 18 Jul 2022 15:20:58 +0200 Subject: arm64: dts: broadcom: bcm4908: add remaining LED pins MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Include all 32 pins. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20220718132100.13277-1-zajec5@gmail.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 75 +++++++++++++++++++++++ 1 file changed, 75 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index 967d2cd3c3ce..ef790e441aa6 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -352,6 +352,61 @@ groups = "led_9_grp_a"; }; + pins_led_10_a: led_10-a-pins { + function = "led_10"; + groups = "led_10_grp_a"; + }; + + pins_led_11_a: led_11-a-pins { + function = "led_11"; + groups = "led_11_grp_a"; + }; + + pins_led_12_a: led_12-a-pins { + function = "led_12"; + groups = "led_12_grp_a"; + }; + + pins_led_13_a: led_13-a-pins { + function = "led_13"; + groups = "led_13_grp_a"; + }; + + pins_led_14_a: led_14-a-pins { + function = "led_14"; + groups = "led_14_grp_a"; + }; + + pins_led_15_a: led_15-a-pins { + function = "led_15"; + groups = "led_15_grp_a"; + }; + + pins_led_16_a: led_16-a-pins { + function = "led_16"; + groups = "led_16_grp_a"; + }; + + pins_led_17_a: led_17-a-pins { + function = "led_17"; + groups = "led_17_grp_a"; + }; + + pins_led_18_a: led_18-a-pins { + function = "led_18"; + groups = "led_18_grp_a"; + }; + + pins_led_19_a: led_19-a-pins { + function = "led_19"; + groups = "led_19_grp_a"; + }; + + pins_led_20_a: led_20-a-pins { + function = "led_20"; + groups = "led_20_grp_a"; + }; + pins_led_21_a: led_21-a-pins { function = "led_21"; groups = "led_21_grp_a"; @@ -362,6 +417,21 @@ groups = "led_22_grp_a"; }; + pins_led_23_a: led_23-a-pins { + function = "led_23"; + groups = "led_23_grp_a"; + }; + + pins_led_24_a: led_24-a-pins { + function = "led_24"; + groups = "led_24_grp_a"; + }; + + pins_led_25_a: led_25-a-pins { + function = "led_25"; + groups = "led_25_grp_a"; + }; + pins_led_26_a: led_26-a-pins { function = "led_26"; groups = "led_26_grp_a"; @@ -387,6 +457,11 @@ groups = "led_30_grp_a"; }; + pins_led_31_a: led_31-a-pins { + function = "led_31"; + groups = "led_31_grp_a"; + }; + pins_hs_uart: hs_uart-pins { function = "hs_uart"; groups = "hs_uart_grp"; -- cgit From 7de56b1dc1149c702d4cc1e89ccc251bfb2bc246 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 18 Jul 2022 15:20:59 +0200 Subject: arm64: dts: broadcom: bcm4908: add LEDs controller block MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit BCM4908 includes LEDs controller that supports multiple brightness levels & hardware blinking. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20220718132100.13277-2-zajec5@gmail.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index ef790e441aa6..dac9d3b4e91d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -517,6 +517,14 @@ status = "okay"; }; + leds: leds@800 { + compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + + #address-cells = <1>; + #size-cells = <0>; + }; + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; -- cgit From 3bcae3396e986b4ab97a69e8de517e32f9691a4b Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 18 Jul 2022 15:21:00 +0200 Subject: arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are 5 software-controllable LEDs on PCB. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20220718132100.13277-3-zajec5@gmail.com Signed-off-by: Florian Fainelli --- .../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 04f8524b5335..4cc90257f05c 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -2,6 +2,7 @@ #include #include +#include #include "bcm4908.dtsi" @@ -118,6 +119,53 @@ }; }; +&leds { + led-power@11 { + reg = <0x11>; + function = LED_FUNCTION_POWER; + color = ; + default-state = "on"; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_17_a>; + }; + + led-wan-red@12 { + reg = <0x12>; + function = LED_FUNCTION_WAN; + color = ; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_18_a>; + }; + + led-wps@14 { + reg = <0x14>; + function = LED_FUNCTION_WPS; + color = ; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_20_a>; + }; + + led-wan-white@15 { + reg = <0x15>; + function = LED_FUNCTION_WAN; + color = ; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_21_a>; + }; + + led-lan@19 { + reg = <0x19>; + function = LED_FUNCTION_LAN; + color = ; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_25_a>; + }; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; -- cgit From 61dc1e3850a6b88903f6f3912db35575ab78ab50 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Thu, 21 Jul 2022 11:15:09 +0200 Subject: ARM: dts: BCM5301X: Add basic PCI controller properties MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes: arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@12000: 'device_type' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@12000: '#address-cells' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@12000: '#size-cells' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@13000: 'device_type' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@13000: '#address-cells' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@13000: '#size-cells' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@14000: 'device_type' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@14000: '#address-cells' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@14000: '#size-cells' is a required property From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml What remains missing is "ranges" property. I currently don't know its correct value for Northstar SoC. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20220721091509.27725-1-zajec5@gmail.com Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 5fc1b847f4aa..a06184b8e0d9 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -239,14 +239,26 @@ pcie0: pcie@12000 { reg = <0x00012000 0x1000>; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; }; pcie1: pcie@13000 { reg = <0x00013000 0x1000>; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; }; pcie2: pcie@14000 { reg = <0x00014000 0x1000>; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; }; usb2: usb2@21000 { -- cgit From 4fdcbde682291fba2c3f45a41decd656d92a314f Mon Sep 17 00:00:00 2001 From: William Zhang Date: Wed, 3 Aug 2022 10:54:49 -0700 Subject: arm64: dts: bcmbca: update BCM4908 board dts files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Append "brcm,bcmbca" to compatible strings based on the new bcmbca binding rule for BCM4908 family based boards. Signed-off-by: William Zhang Acked-by: Rafał Miłecki Link: https://lore.kernel.org/r/20220803175455.47638-4-william.zhang@broadcom.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +- arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 2 +- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts index 2dd028438c22..d8b60575eb4f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" / { - compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; + compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; model = "Netgear R8000P"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts index 064f7f549665..296393d4aaab 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" / { - compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; model = "TP-Link Archer C2300 V1"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 04f8524b5335..787c7ddf9102 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -6,7 +6,7 @@ #include "bcm4908.dtsi" / { - compatible = "asus,gt-ac5300", "brcm,bcm4908"; + compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; model = "Asus GT-AC5300"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts index 3c2cf2d238b6..23b96c663239 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts @@ -3,7 +3,7 @@ #include "bcm4908.dtsi" / { - compatible = "netgear,raxe500", "brcm,bcm4908"; + compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; model = "Netgear RAXE500"; memory@0 { -- cgit From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001 From: William Zhang Date: Wed, 3 Aug 2022 10:54:50 -0700 Subject: arm64: dts: Move BCM4908 dts to bcmbca folder As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the BCM4908 board dts. Delete bcm4908 folder and its makefile as well. Signed-off-by: William Zhang Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/Makefile | 1 - arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 - .../broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 157 ------- .../bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 182 -------- arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi | 26 -- .../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 159 ------- .../broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 50 --- arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 492 --------------------- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 + .../dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 157 +++++++ .../bcmbca/bcm4906-tplink-archer-c2300-v1.dts | 182 ++++++++ arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi | 26 ++ .../dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts | 159 +++++++ .../broadcom/bcmbca/bcm4908-netgear-raxe500.dts | 50 +++ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 492 +++++++++++++++++++++ 15 files changed, 1070 insertions(+), 1072 deletions(-) delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index e8584d3b698f..05d8c5ecf3b0 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -8,7 +8,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2837-rpi-cm3-io3.dtb \ bcm2837-rpi-zero-2-w.dtb -subdir-y += bcm4908 subdir-y += bcmbca subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile deleted file mode 100644 index 6e364e304d4f..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts deleted file mode 100644 index d8b60575eb4f..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include -#include - -#include "bcm4906.dtsi" - -/ { - compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; - model = "Netgear R8000P"; - - memory@0 { - device_type = "memory"; - reg = <0x00 0x00 0x00 0x20000000>; - }; - - leds { - compatible = "gpio-leds"; - - led-power-white { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - led-power-amber { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - led-wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - led-2ghz { - function = "2ghz"; - color = ; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - led-5ghz-1 { - function = "5ghz-1"; - color = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - led-5ghz-2 { - function = "5ghz-2"; - color = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - - led-usb2 { - function = "usb2"; - color = ; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - - led-usb3 { - function = "usb3"; - color = ; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - - led-wifi { - function = "wifi"; - color = ; - gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&enet { - nvmem-cells = <&base_mac_addr>; - nvmem-cell-names = "mac-address"; -}; - -&usb_phy { - brcm,ioc = <1>; - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; - -&ports { - port@0 { - label = "lan4"; - }; - - port@1 { - label = "lan3"; - }; - - port@2 { - label = "lan2"; - }; - - port@3 { - label = "lan1"; - }; - - port@7 { - reg = <7>; - phy-mode = "internal"; - phy-handle = <&phy12>; - label = "wan"; - }; -}; - -&nandcs { - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - - #address-cells = <1>; - #size-cells = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "nvmem-cells"; - label = "cferom"; - reg = <0x0 0x100000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x100000>; - - base_mac_addr: mac@106a0 { - reg = <0x106a0 0x6>; - }; - }; - - partition@100000 { - compatible = "brcm,bcm4908-firmware"; - label = "firmware"; - reg = <0x100000 0x4400000>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts deleted file mode 100644 index 296393d4aaab..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +++ /dev/null @@ -1,182 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include -#include - -#include "bcm4906.dtsi" - -/ { - compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; - model = "TP-Link Archer C2300 V1"; - - memory@0 { - device_type = "memory"; - reg = <0x00 0x00 0x00 0x20000000>; - }; - - leds { - compatible = "gpio-leds"; - - led-power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - }; - - led-2ghz { - function = "2ghz"; - color = ; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - }; - - led-5ghz { - function = "5ghz"; - color = ; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - }; - - led-wan-amber { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - }; - - led-wan-blue { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - led-lan { - function = LED_FUNCTION_LAN; - color = ; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - led-wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - led-usb2 { - function = "usb2"; - color = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - led-usb3 { - function = "usbd3"; - color = ; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - - led-brightness { - function = LED_FUNCTION_BACKLIGHT; - color = ; - gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - key-brightness { - label = "LEDs"; - linux,code = ; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - - key-wps { - label = "WPS"; - linux,code = ; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - key-wifi { - label = "WiFi"; - linux,code = ; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - }; - - key-restart { - label = "Reset"; - linux,code = ; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&usb_phy { - brcm,ioc = <1>; - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; - -&ports { - port@0 { - label = "lan4"; - }; - - port@1 { - label = "lan3"; - }; - - port@2 { - label = "lan2"; - }; - - port@3 { - label = "lan1"; - }; - - port@7 { - reg = <7>; - phy-mode = "internal"; - phy-handle = <&phy12>; - label = "wan"; - }; -}; - -&nandcs { - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - - #address-cells = <1>; - #size-cells = <0>; - - partitions { - compatible = "brcm,bcm4908-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "cferom"; - reg = <0x0 0x100000>; - }; - - partition@100000 { - compatible = "brcm,bcm4908-firmware"; - reg = <0x100000 0x3900000>; - }; - - partition@5800000 { - compatible = "brcm,bcm4908-firmware"; - reg = <0x3a00000 0x3900000>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi deleted file mode 100644 index d084c33d5ca8..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "bcm4908.dtsi" - -/ { - cpus { - /delete-node/ cpu@2; - - /delete-node/ cpu@3; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - ; - interrupt-affinity = <&cpu0>, <&cpu1>; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts deleted file mode 100644 index 787c7ddf9102..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include - -#include "bcm4908.dtsi" - -/ { - compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; - model = "Asus GT-AC5300"; - - memory@0 { - device_type = "memory"; - reg = <0x00 0x00 0x00 0x40000000>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - key-wifi { - label = "WiFi"; - linux,code = ; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - - key-wps { - label = "WPS"; - linux,code = ; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - - key-restart { - label = "Reset"; - linux,code = ; - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - }; - - key-brightness { - label = "LEDs"; - linux,code = ; - gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&enet { - nvmem-cells = <&base_mac_addr>; - nvmem-cell-names = "mac-address"; -}; - -&usb_phy { - brcm,ioc = <1>; - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; - -&ports { - port@0 { - label = "lan2"; - }; - - port@1 { - label = "lan1"; - }; - - port@2 { - label = "lan6"; - }; - - port@3 { - label = "lan5"; - }; - - /* External BCM53134S switch */ - port@7 { - label = "sw"; - reg = <7>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; -}; - -&mdio { - /* lan8 */ - ethernet-phy@0 { - reg = <0>; - }; - - /* lan7 */ - ethernet-phy@1 { - reg = <1>; - }; - - /* lan4 */ - ethernet-phy@2 { - reg = <2>; - }; - - /* lan3 */ - ethernet-phy@3 { - reg = <3>; - }; -}; - -&nandcs { - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - brcm,nand-has-wp; - - #address-cells = <1>; - #size-cells = <0>; - - partitions { - compatible = "brcm,bcm4908-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "nvmem-cells"; - label = "cferom"; - reg = <0x0 0x100000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x100000>; - - base_mac_addr: mac@106a0 { - reg = <0x106a0 0x6>; - }; - }; - - partition@100000 { - compatible = "brcm,bcm4908-firmware"; - reg = <0x100000 0x5700000>; - }; - - partition@5800000 { - compatible = "brcm,bcm4908-firmware"; - reg = <0x5800000 0x5700000>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts deleted file mode 100644 index 23b96c663239..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "bcm4908.dtsi" - -/ { - compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; - model = "Netgear RAXE500"; - - memory@0 { - device_type = "memory"; - reg = <0x00 0x00 0x00 0x40000000>; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; - -&ports { - port@0 { - label = "lan4"; - }; - - port@1 { - label = "lan3"; - }; - - port@2 { - label = "lan2"; - }; - - port@3 { - label = "lan1"; - }; - - port@7 { - reg = <7>; - phy-mode = "internal"; - phy-handle = <&phy12>; - label = "wan"; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi deleted file mode 100644 index 967d2cd3c3ce..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ /dev/null @@ -1,492 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include -#include -#include - -/dts-v1/; - -/ { - interrupt-parent = <&gic>; - - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - }; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x81000000 0x4000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - clocks { - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "periph"; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x80000000 0x281000>; - - enet: ethernet@2000 { - compatible = "brcm,bcm4908-enet"; - reg = <0x2000 0x1000>; - - interrupts = , - ; - interrupt-names = "rx", "tx"; - }; - - usb_phy: usb-phy@c200 { - compatible = "brcm,bcm4908-usb-phy"; - reg = <0xc200 0x100>; - reg-names = "ctrl"; - power-domains = <&pmb BCM_PMB_HOST_USB>; - dr_mode = "host"; - brcm,has-xhci; - brcm,has-eohci; - #phy-cells = <1>; - status = "disabled"; - }; - - ehci: usb@c300 { - compatible = "generic-ehci"; - reg = <0xc300 0x100>; - interrupts = ; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - ohci: usb@c400 { - compatible = "generic-ohci"; - reg = <0xc400 0x100>; - interrupts = ; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - xhci: usb@d000 { - compatible = "generic-xhci"; - reg = <0xd000 0x8c8>; - interrupts = ; - phys = <&usb_phy PHY_TYPE_USB3>; - status = "disabled"; - }; - - bus@80000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0x80000 0x50000>; - - ethernet-switch@0 { - compatible = "brcm,bcm4908-switch"; - reg = <0x0 0x40000>, - <0x40000 0x110>, - <0x40340 0x30>, - <0x40380 0x30>, - <0x40600 0x34>, - <0x40800 0x208>; - reg-names = "core", "reg", "intrl2_0", - "intrl2_1", "fcb", "acb"; - interrupts = , - ; - brcm,num-gphy = <5>; - brcm,num-rgmii-ports = <2>; - - #address-cells = <1>; - #size-cells = <0>; - - ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - phy-mode = "internal"; - phy-handle = <&phy8>; - }; - - port@1 { - reg = <1>; - phy-mode = "internal"; - phy-handle = <&phy9>; - }; - - port@2 { - reg = <2>; - phy-mode = "internal"; - phy-handle = <&phy10>; - }; - - port@3 { - reg = <3>; - phy-mode = "internal"; - phy-handle = <&phy11>; - }; - - port@8 { - reg = <8>; - phy-mode = "internal"; - ethernet = <&enet>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - - mdio: mdio@405c0 { - compatible = "brcm,unimac-mdio"; - reg = <0x405c0 0x8>; - reg-names = "mdio"; - #size-cells = <0>; - #address-cells = <1>; - - phy8: ethernet-phy@8 { - reg = <8>; - }; - - phy9: ethernet-phy@9 { - reg = <9>; - }; - - phy10: ethernet-phy@a { - reg = <10>; - }; - - phy11: ethernet-phy@b { - reg = <11>; - }; - - phy12: ethernet-phy@c { - reg = <12>; - }; - }; - }; - - procmon: syscon@280000 { - compatible = "simple-bus"; - reg = <0x280000 0x1000>; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - pmb: power-controller@2800c0 { - compatible = "brcm,bcm4908-pmb"; - reg = <0x2800c0 0x40>; - #power-domain-cells = <1>; - }; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0xff800000 0x3000>; - - twd: timer-mfd@400 { - compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; - reg = <0x400 0x4c>; - ranges = <0x0 0x400 0x4c>; - - #address-cells = <1>; - #size-cells = <1>; - - watchdog@28 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x28 0x8>; - }; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0x500 0x28>, <0x528 0x28>; - - #gpio-cells = <2>; - gpio-controller; - }; - - pinctrl@560 { - compatible = "brcm,bcm4908-pinctrl"; - reg = <0x560 0x10>; - - pins_led_0_a: led_0-a-pins { - function = "led_0"; - groups = "led_0_grp_a"; - }; - - pins_led_1_a: led_1-a-pins { - function = "led_1"; - groups = "led_1_grp_a"; - }; - - pins_led_2_a: led_2-a-pins { - function = "led_2"; - groups = "led_2_grp_a"; - }; - - pins_led_3_a: led_3-a-pins { - function = "led_3"; - groups = "led_3_grp_a"; - }; - - pins_led_4_a: led_4-a-pins { - function = "led_4"; - groups = "led_4_grp_a"; - }; - - pins_led_5_a: led_5-a-pins { - function = "led_5"; - groups = "led_5_grp_a"; - }; - - pins_led_6_a: led_6-a-pins { - function = "led_6"; - groups = "led_6_grp_a"; - }; - - pins_led_7_a: led_7-a-pins { - function = "led_7"; - groups = "led_7_grp_a"; - }; - - pins_led_8_a: led_8-a-pins { - function = "led_8"; - groups = "led_8_grp_a"; - }; - - pins_led_9_a: led_9-a-pins { - function = "led_9"; - groups = "led_9_grp_a"; - }; - - pins_led_21_a: led_21-a-pins { - function = "led_21"; - groups = "led_21_grp_a"; - }; - - pins_led_22_a: led_22-a-pins { - function = "led_22"; - groups = "led_22_grp_a"; - }; - - pins_led_26_a: led_26-a-pins { - function = "led_26"; - groups = "led_26_grp_a"; - }; - - pins_led_27_a: led_27-a-pins { - function = "led_27"; - groups = "led_27_grp_a"; - }; - - pins_led_28_a: led_28-a-pins { - function = "led_28"; - groups = "led_28_grp_a"; - }; - - pins_led_29_a: led_29-a-pins { - function = "led_29"; - groups = "led_29_grp_a"; - }; - - pins_led_30_a: led_30-a-pins { - function = "led_30"; - groups = "led_30_grp_a"; - }; - - pins_hs_uart: hs_uart-pins { - function = "hs_uart"; - groups = "hs_uart_grp"; - }; - - pins_i2c_a: i2c-a-pins { - function = "i2c"; - groups = "i2c_grp_a"; - }; - - pins_i2c_b: i2c-b-pins { - function = "i2c"; - groups = "i2c_grp_b"; - }; - - pins_i2s: i2s-pins { - function = "i2s"; - groups = "i2s_grp"; - }; - - pins_nand_ctrl: nand_ctrl-pins { - function = "nand_ctrl"; - groups = "nand_ctrl_grp"; - }; - - pins_nand_data: nand_data-pins { - function = "nand_data"; - groups = "nand_data_grp"; - }; - - pins_emmc_ctrl: emmc_ctrl-pins { - function = "emmc_ctrl"; - groups = "emmc_ctrl_grp"; - }; - - pins_usb0_pwr: usb0_pwr-pins { - function = "usb0_pwr"; - groups = "usb0_pwr_grp"; - }; - - pins_usb1_pwr: usb1_pwr-pins { - function = "usb1_pwr"; - groups = "usb1_pwr_grp"; - }; - }; - - uart0: serial@640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x640 0x18>; - interrupts = ; - clocks = <&periph_clk>; - clock-names = "refclk"; - status = "okay"; - }; - - nand-controller@1800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; - reg = <0x1800 0x600>, <0x2000 0x10>; - reg-names = "nand", "nand-int-base"; - interrupts = ; - interrupt-names = "nand"; - status = "okay"; - - nandcs: nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - }; - }; - - i2c@2100 { - compatible = "brcm,brcmper-i2c"; - reg = <0x2100 0x58>; - clock-frequency = <97500>; - pinctrl-names = "default"; - pinctrl-0 = <&pins_i2c_a>; - status = "disabled"; - }; - - misc@2600 { - compatible = "brcm,misc", "simple-mfd"; - reg = <0x2600 0xe4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x2600 0xe4>; - - reset-controller@2644 { - compatible = "brcm,bcm4908-misc-pcie-reset"; - reg = <0x44 0x04>; - #reset-cells = <1>; - }; - }; - }; - - reboot { - compatible = "syscon-reboot"; - regmap = <&twd>; - offset = <0x34>; - mask = <1>; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile index 38f14307184b..d30fa75f0611 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile @@ -1,5 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4906-netgear-r8000p.dtb \ + bcm4906-tplink-archer-c2300-v1.dtb \ + bcm4908-asus-gt-ac5300.dtb \ + bcm4908-netgear-raxe500.dtb \ bcm4912-asus-gt-ax6000.dtb \ bcm94912.dtb \ bcm963158.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts new file mode 100644 index 000000000000..d8b60575eb4f --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include +#include + +#include "bcm4906.dtsi" + +/ { + compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear R8000P"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power-white { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led-power-amber { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + led-wps { + function = LED_FUNCTION_WPS; + color = ; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + function = "2ghz"; + color = ; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-1 { + function = "5ghz-1"; + color = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-2 { + function = "5ghz-2"; + color = ; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = ; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usb3"; + color = ; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + led-wifi { + function = "wifi"; + color = ; + gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "nvmem-cells"; + label = "cferom"; + reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + label = "firmware"; + reg = <0x100000 0x4400000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts new file mode 100644 index 000000000000..296393d4aaab --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include +#include + +#include "bcm4906.dtsi" + +/ { + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + function = "2ghz"; + color = ; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + function = "5ghz"; + color = ; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan-blue { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + led-lan { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + led-wps { + function = LED_FUNCTION_WPS; + color = ; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = ; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usbd3"; + color = ; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-brightness { + function = LED_FUNCTION_BACKLIGHT; + color = ; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + key-brightness { + label = "LEDs"; + linux,code = ; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + key-wps { + label = "WPS"; + linux,code = ; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + key-wifi { + label = "WiFi"; + linux,code = ; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + key-restart { + label = "Reset"; + linux,code = ; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x3900000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x3a00000 0x3900000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi new file mode 100644 index 000000000000..d084c33d5ca8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm4908.dtsi" + +/ { + cpus { + /delete-node/ cpu@2; + + /delete-node/ cpu@3; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + ; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts new file mode 100644 index 000000000000..787c7ddf9102 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "bcm4908.dtsi" + +/ { + compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; + model = "Asus GT-AC5300"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + key-wifi { + label = "WiFi"; + linux,code = ; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + + key-wps { + label = "WPS"; + linux,code = ; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + + key-restart { + label = "Reset"; + linux,code = ; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + key-brightness { + label = "LEDs"; + linux,code = ; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan2"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan6"; + }; + + port@3 { + label = "lan5"; + }; + + /* External BCM53134S switch */ + port@7 { + label = "sw"; + reg = <7>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; +}; + +&mdio { + /* lan8 */ + ethernet-phy@0 { + reg = <0>; + }; + + /* lan7 */ + ethernet-phy@1 { + reg = <1>; + }; + + /* lan4 */ + ethernet-phy@2 { + reg = <2>; + }; + + /* lan3 */ + ethernet-phy@3 { + reg = <3>; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + brcm,nand-has-wp; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "nvmem-cells"; + label = "cferom"; + reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x5700000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x5800000 0x5700000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts new file mode 100644 index 000000000000..23b96c663239 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm4908.dtsi" + +/ { + compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear RAXE500"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi new file mode 100644 index 000000000000..967d2cd3c3ce --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include +#include +#include + +/dts-v1/; + +/ { + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x80000000 0x281000>; + + enet: ethernet@2000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x2000 0x1000>; + + interrupts = , + ; + interrupt-names = "rx", "tx"; + }; + + usb_phy: usb-phy@c200 { + compatible = "brcm,bcm4908-usb-phy"; + reg = <0xc200 0x100>; + reg-names = "ctrl"; + power-domains = <&pmb BCM_PMB_HOST_USB>; + dr_mode = "host"; + brcm,has-xhci; + brcm,has-eohci; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: usb@c300 { + compatible = "generic-ehci"; + reg = <0xc300 0x100>; + interrupts = ; + phys = <&usb_phy PHY_TYPE_USB2>; + status = "disabled"; + }; + + ohci: usb@c400 { + compatible = "generic-ohci"; + reg = <0xc400 0x100>; + interrupts = ; + phys = <&usb_phy PHY_TYPE_USB2>; + status = "disabled"; + }; + + xhci: usb@d000 { + compatible = "generic-xhci"; + reg = <0xd000 0x8c8>; + interrupts = ; + phys = <&usb_phy PHY_TYPE_USB3>; + status = "disabled"; + }; + + bus@80000 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0 0x80000 0x50000>; + + ethernet-switch@0 { + compatible = "brcm,bcm4908-switch"; + reg = <0x0 0x40000>, + <0x40000 0x110>, + <0x40340 0x30>, + <0x40380 0x30>, + <0x40600 0x34>, + <0x40800 0x208>; + reg-names = "core", "reg", "intrl2_0", + "intrl2_1", "fcb", "acb"; + interrupts = , + ; + brcm,num-gphy = <5>; + brcm,num-rgmii-ports = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "internal"; + phy-handle = <&phy8>; + }; + + port@1 { + reg = <1>; + phy-mode = "internal"; + phy-handle = <&phy9>; + }; + + port@2 { + reg = <2>; + phy-mode = "internal"; + phy-handle = <&phy10>; + }; + + port@3 { + reg = <3>; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + mdio: mdio@405c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x405c0 0x8>; + reg-names = "mdio"; + #size-cells = <0>; + #address-cells = <1>; + + phy8: ethernet-phy@8 { + reg = <8>; + }; + + phy9: ethernet-phy@9 { + reg = <9>; + }; + + phy10: ethernet-phy@a { + reg = <10>; + }; + + phy11: ethernet-phy@b { + reg = <11>; + }; + + phy12: ethernet-phy@c { + reg = <12>; + }; + }; + }; + + procmon: syscon@280000 { + compatible = "simple-bus"; + reg = <0x280000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + pmb: power-controller@2800c0 { + compatible = "brcm,bcm4908-pmb"; + reg = <0x2800c0 0x40>; + #power-domain-cells = <1>; + }; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0xff800000 0x3000>; + + twd: timer-mfd@400 { + compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; + reg = <0x400 0x4c>; + ranges = <0x0 0x400 0x4c>; + + #address-cells = <1>; + #size-cells = <1>; + + watchdog@28 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x28 0x8>; + }; + }; + + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0x500 0x28>, <0x528 0x28>; + + #gpio-cells = <2>; + gpio-controller; + }; + + pinctrl@560 { + compatible = "brcm,bcm4908-pinctrl"; + reg = <0x560 0x10>; + + pins_led_0_a: led_0-a-pins { + function = "led_0"; + groups = "led_0_grp_a"; + }; + + pins_led_1_a: led_1-a-pins { + function = "led_1"; + groups = "led_1_grp_a"; + }; + + pins_led_2_a: led_2-a-pins { + function = "led_2"; + groups = "led_2_grp_a"; + }; + + pins_led_3_a: led_3-a-pins { + function = "led_3"; + groups = "led_3_grp_a"; + }; + + pins_led_4_a: led_4-a-pins { + function = "led_4"; + groups = "led_4_grp_a"; + }; + + pins_led_5_a: led_5-a-pins { + function = "led_5"; + groups = "led_5_grp_a"; + }; + + pins_led_6_a: led_6-a-pins { + function = "led_6"; + groups = "led_6_grp_a"; + }; + + pins_led_7_a: led_7-a-pins { + function = "led_7"; + groups = "led_7_grp_a"; + }; + + pins_led_8_a: led_8-a-pins { + function = "led_8"; + groups = "led_8_grp_a"; + }; + + pins_led_9_a: led_9-a-pins { + function = "led_9"; + groups = "led_9_grp_a"; + }; + + pins_led_21_a: led_21-a-pins { + function = "led_21"; + groups = "led_21_grp_a"; + }; + + pins_led_22_a: led_22-a-pins { + function = "led_22"; + groups = "led_22_grp_a"; + }; + + pins_led_26_a: led_26-a-pins { + function = "led_26"; + groups = "led_26_grp_a"; + }; + + pins_led_27_a: led_27-a-pins { + function = "led_27"; + groups = "led_27_grp_a"; + }; + + pins_led_28_a: led_28-a-pins { + function = "led_28"; + groups = "led_28_grp_a"; + }; + + pins_led_29_a: led_29-a-pins { + function = "led_29"; + groups = "led_29_grp_a"; + }; + + pins_led_30_a: led_30-a-pins { + function = "led_30"; + groups = "led_30_grp_a"; + }; + + pins_hs_uart: hs_uart-pins { + function = "hs_uart"; + groups = "hs_uart_grp"; + }; + + pins_i2c_a: i2c-a-pins { + function = "i2c"; + groups = "i2c_grp_a"; + }; + + pins_i2c_b: i2c-b-pins { + function = "i2c"; + groups = "i2c_grp_b"; + }; + + pins_i2s: i2s-pins { + function = "i2s"; + groups = "i2s_grp"; + }; + + pins_nand_ctrl: nand_ctrl-pins { + function = "nand_ctrl"; + groups = "nand_ctrl_grp"; + }; + + pins_nand_data: nand_data-pins { + function = "nand_data"; + groups = "nand_data_grp"; + }; + + pins_emmc_ctrl: emmc_ctrl-pins { + function = "emmc_ctrl"; + groups = "emmc_ctrl_grp"; + }; + + pins_usb0_pwr: usb0_pwr-pins { + function = "usb0_pwr"; + groups = "usb0_pwr_grp"; + }; + + pins_usb1_pwr: usb1_pwr-pins { + function = "usb1_pwr"; + groups = "usb1_pwr_grp"; + }; + }; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = ; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "okay"; + }; + + nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + interrupts = ; + interrupt-names = "nand"; + status = "okay"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + i2c@2100 { + compatible = "brcm,brcmper-i2c"; + reg = <0x2100 0x58>; + clock-frequency = <97500>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c_a>; + status = "disabled"; + }; + + misc@2600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0x2600 0xe4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x2600 0xe4>; + + reset-controller@2644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0x44 0x04>; + #reset-cells = <1>; + }; + }; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&twd>; + offset = <0x34>; + mask = <1>; + }; +}; -- cgit From 72e0bdb6d7edb1785d58f2e8e7c80e1d2f93a319 Mon Sep 17 00:00:00 2001 From: William Zhang Date: Wed, 3 Aug 2022 10:54:51 -0700 Subject: arm64: dts: Add BCM4908 generic board dts Add generic bare bone bcm94908.dts file to support any 4908 based design. It supports cpu subsystem, memory and an uart console. This can be useful for board bring-up and cpu subsystem and memory related kernel test as well. Signed-off-by: William Zhang Link: https://lore.kernel.org/r/20220803175455.47638-6-william.zhang@broadcom.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 1 + arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts | 30 ++++++++++++++++++++++++ 2 files changed, 31 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile index d30fa75f0611..27741b71ba9e 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ bcm4906-tplink-archer-c2300-v1.dtb \ bcm4908-asus-gt-ac5300.dtb \ bcm4908-netgear-raxe500.dtb \ + bcm94908.dtb \ bcm4912-asus-gt-ax6000.dtb \ bcm94912.dtb \ bcm963158.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts new file mode 100644 index 000000000000..fcbd3c430ace --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm4908.dtsi" + +/ { + model = "Broadcom BCM94908 Reference Board"; + compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; -- cgit From dd5c672d7ca92040ed77aaf9293a5134a5980af1 Mon Sep 17 00:00:00 2001 From: William Zhang Date: Wed, 3 Aug 2022 10:54:53 -0700 Subject: arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA Delete ARCH_BCM4908 platform Kconfig for BCM4908 SoC as it is replaced by ARCH_BCMBCA and move its selection to ARCH_BCMBCA. Signed-off-by: William Zhang Link: https://lore.kernel.org/r/20220803175455.47638-8-william.zhang@broadcom.com Signed-off-by: Florian Fainelli --- arch/arm64/Kconfig.platforms | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 74e9e9de3759..bfd344a4737e 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -47,15 +47,6 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. -config ARCH_BCM4908 - bool "Broadcom BCM4908 family" - select ARCH_BCMBCA - select GPIOLIB - help - This enables support for the Broadcom BCM4906, BCM4908 and - BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be - found in home routers. - config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" select COMMON_CLK_IPROC @@ -66,6 +57,7 @@ config ARCH_BCM_IPROC config ARCH_BCMBCA bool "Broadcom Broadband Carrier Access (BCA) origin SoC" + select GPIOLIB help Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based BCA chipset. -- cgit From ee8898fd7a89d950965105731e1f933583cdfc2e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Jul 2022 10:08:04 +0200 Subject: arm64: dts: renesas: Add Renesas R8A779MB SoC support Add support for the Renesas R-Car H3Ne-1.7G (R8A779MB) SoC, which is a different grading of the R-Car H3-N (R8A77951) SoC. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/862a5eecc850cbb90af86a56513b644b638fb62b.1656072871.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779mb.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779mb.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779mb.dtsi b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi new file mode 100644 index 000000000000..40d1dce2f350 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3Ne-1.7G (R8A779MB) SoC + * + * Copyright (C) 2022 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779mb", "renesas,r8a7795"; +}; -- cgit From ffd882417412ea7273ae14deec77711f6df54bbc Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 22 Jul 2022 16:11:55 +0100 Subject: arm64: dts: renesas: rzg2l-smarc-som: Add PHY interrupt support for ETH{0/1} The PHY interrupt (INT_N) pin is connected to IRQ2 and IRQ3 for ETH0 and ETH1 respectively. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220722151155.21100-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 9410796c8ad6..c4faff092380 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -6,6 +6,7 @@ */ #include +#include #include /* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ @@ -94,6 +95,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = ; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -120,6 +123,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = ; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -171,7 +176,8 @@ , /* ET0_RXD0 */ , /* ET0_RXD1 */ , /* ET0_RXD2 */ - ; /* ET0_RXD3 */ + , /* ET0_RXD3 */ + ; /* IRQ2 */ }; eth1_pins: eth1 { @@ -189,7 +195,8 @@ , /* ET1_RXD0 */ , /* ET1_RXD1 */ , /* ET1_RXD2 */ - ; /* ET1_RXD3 */ + , /* ET1_RXD3 */ + ; /* IRQ3 */ }; gpio-sd0-pwr-en-hog { -- cgit From 59ec069d50550273a83180ea6c950d382d7bf8e3 Mon Sep 17 00:00:00 2001 From: Vyacheslav Bocharov Date: Thu, 11 Aug 2022 13:31:12 +0300 Subject: arm64: dts: meson-axg: add support for JetHub D1p (j110) - add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home automation controller with the following features: - DIN Rail Mounting - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1/2/4GB LPDDR4 - 8/16/32GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac - TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Active POE - unify device tree files for JetHub D1/D1p devices Signed-off-by: Vyacheslav Bocharov Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220811103113.3097868-2-adeep@lexina.in --- arch/arm64/boot/dts/amlogic/Makefile | 2 + .../dts/amlogic/meson-axg-jethome-jethub-j100.dts | 338 +------------------- .../meson-axg-jethome-jethub-j110-rev-2.dts | 37 +++ .../meson-axg-jethome-jethub-j110-rev-3.dts | 27 ++ .../dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 351 +++++++++++++++++++++ 5 files changed, 421 insertions(+), 334 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 8773211df50e..33e9c96af099 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts index 8b0d586aa84e..b2d6ba660914 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -1,270 +1,29 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2021 Vyacheslav Bocharov - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev - * Author: Alexey Shevelkin + * Copyright (c) 2022 Vyacheslav Bocharov + * Copyright (c) 2022 JetHome * Author: Vyacheslav Bocharov */ /dts-v1/; -#include "meson-axg.dtsi" -#include -#include +#include "meson-axg-jethome-jethub-j1xx.dtsi" / { compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; - model = "JetHome JetHub J100"; - aliases { - serial0 = &uart_AO; /* Console */ - serial2 = &uart_AO_B; /* External UART (Wireless Module) */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; + model = "JetHome JetHub D1 (J100)"; /* 1024MB RAM */ memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; - - reserved-memory { - linux,cma { - size = <0x0 0x400000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vccq_1v8: regulator-vccq_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCCQ_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&scpi_sensors 0>; - trips { - cpu_passive: cpu-passive { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - onewire { - compatible = "w1-gpio"; - gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; - }; -}; - -&efuse { - sn: sn@32 { - reg = <0x32 0x20>; - }; - - eth_mac: eth_mac@0 { - reg = <0x0 0x6>; - }; - - bt_mac: bt_mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi_mac@c { - reg = <0xc 0x6>; - }; - - bid: bid@12 { - reg = <0x12 0x20>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rmii_x_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ - eth_phy0: ethernet-phy@0 { - /* compatible = "ethernet-phy-id0243.0c54";*/ - max-speed = <100>; - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Internal I2C bus (on CPU module) */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - /* RTC */ - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; }; -/* Peripheral I2C bus (on motherboard) */ -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; /* wifi module */ &sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -272,99 +31,10 @@ }; }; -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vccq_1v8>; -}; - /* UART Bluetooth */ &uart_B { - status = "okay"; - pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; }; }; - -/* UART Console */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* UART Wireless module */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&spicc1 { - status = "okay"; - pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; - pinctrl-names = "default"; -}; - -&gpio { - gpio-line-names = - "", "", "", "", "", // 0 - 4 - "", "", "", "", "", // 5 - 9 - "UserButton", "", "", "", "", // 10 - 14 - "", "", "", "", "", // 15 - 19 - "", "", "", "", "", // 20 - 24 - "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 - "Output1", "", "", "", "", // 30 - 34 - "", "ZigBeeBOOT", "", "", "", // 35 - 39 - "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 - "Input2", "Input1", "", "", "", // 45 - 49 - "", "", "", "", "", // 50 - 54 - "", "", "", "", "", // 55 - 59 - "", "", "", "", "", // 60 - 64 - "", "", "", "", "", // 65 - 69 - "", "", "", "", "", // 70 - 74 - "", "", "", "", "", // 75 - 79 - "", "", "", "", "", // 80 - 84 - "", ""; // 85-86 -}; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts new file mode 100644 index 000000000000..0062667c4f65 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov + */ + +/dts-v1/; + +#include "meson-axg-jethome-jethub-j1xx.dtsi" + +/ { + compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub D1p (J110) HW rev.2"; + + /* 2GiB or 4GiB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + + +/* wifi module */ +&sd_emmc_b { + broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ +}; + +/* UART Bluetooth */ +&uart_B { + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts new file mode 100644 index 000000000000..c2d22b00c1cd --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov + */ + +/dts-v1/; + +#include "meson-axg-jethome-jethub-j1xx.dtsi" + +/ { + compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub D1p (J110) Hw rev.3"; + + /* 2GiB or 4GiB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + + +/* wifi module */ +&sd_emmc_b { + broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi new file mode 100644 index 000000000000..5836b0030931 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov + * Author: Aleksandr Kazantsev + * Author: Alexey Shevelkin + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include +#include + +/ { + aliases { + serial0 = &uart_AO; /* Console */ + serial2 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x400000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vccq_1v8: regulator-vccq_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCCQ_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; + #gpio-cells = <1>; + }; +}; + +&efuse { + sn: sn@32 { + reg = <0x32 0x20>; + }; + + eth_mac: eth_mac@0 { + reg = <0x0 0x6>; + }; + + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@c { + reg = <0xc 0x6>; + }; + + bid: bid@12 { + reg = <0x12 0x20>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + /* compatible = "ethernet-phy-id0243.0c54";*/ + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccq_1v8>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; + pinctrl-names = "default"; +}; + +&gpio { + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; + +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; -- cgit From 8b212526a957e012e88d68d7f33bb11b312c2ea6 Mon Sep 17 00:00:00 2001 From: Michal Vokáč Date: Thu, 14 Jul 2022 18:25:15 +0200 Subject: ARM: dts: imx6dl-yapp4: Bind the backlight controller to the LCD panel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add connection between the backlight controller and LCD panel. With that the backlight is automatically switched on when the panel is on or switched off when the panel is blanked. Signed-off-by: Michal Vokáč Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 674af39c884a..52162e8c7274 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -55,6 +55,7 @@ panel: panel { compatible = "dataimage,scf0700c48ggu18"; power-supply = <&sw2_reg>; + backlight = <&backlight>; status = "disabled"; port { -- cgit From 300b5f661eebefb8571841b78091343eb87eca54 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 28 Jul 2022 13:37:47 +0200 Subject: arm64: dts: qcom: sdm845: narrow LLCC address space The Last Level Cache Controller (LLCC) device does not need to access entire LLCC address space. Currently driver uses only hardware info and status registers which both reside in LLCC0_COMMON range (offset 0x30000, size 0x1000). Narrow the address space to allow binding other drivers to rest of LLCC address space. Cc: Rajendra Nayak Cc: Sibi Sankar Reported-by: Steev Klimaszewski Suggested-by: Sibi Sankar Signed-off-by: Krzysztof Kozlowski Tested-by: Steev Klimaszewski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220728113748.170548-11-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f0e286715d1b..4d5ae5897d1d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2138,7 +2138,7 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; + reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; interrupts = ; }; -- cgit From 7921bd3d96d561d5bf145a905e9cc51c1fce589f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 28 Jul 2022 13:37:48 +0200 Subject: arm64: dts: qcom: sdm845: add LLCC BWMON The SDM845 comes with few instances of Bandwidth Monitor. The already supported one monitors traffic between CPU and Last Level Cache Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of register layout). SDM845 also has also BWMON instance measuring traffic between LLCC and memory with different register layout: called v5. Cc: Rajendra Nayak Cc: Sibi Sankar Signed-off-by: Krzysztof Kozlowski Tested-by: Steev Klimaszewski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220728113748.170548-12-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 37 ++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 4d5ae5897d1d..98d34b5e1df2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2143,6 +2143,43 @@ interrupts = ; }; + pmu@114a000 { + compatible = "qcom,sdm845-llcc-bwmon"; + reg = <0 0x0114a000 0 0x1000>; + interrupts = ; + interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for gladiator_noc-mem_noc + * interconnect. This also matches the + * bandwidth table of qcom,llccbw (qcom,bw-tbl, + * bus width: 4 bytes) from msm-4.9 downstream + * kernel. + */ + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <3072000>; + }; + opp-3 { + opp-peak-kBps = <5412000>; + }; + opp-4 { + opp-peak-kBps = <7216000>; + }; + }; + }; + pmu@1436400 { compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; reg = <0 0x01436400 0 0x600>; -- cgit From 6af72a312d76063af3bb82057efb7649c3bc6e2a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:11 +0200 Subject: arm64: dts: qcom: sc8280xp-crd: disable touchscreen pull-up The touchscreen interrupt line has an external pull-up so disable the internal one as is done for the keyboard and touchpad. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-2-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 45058ad0a1c8..6edcc10ed762 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -414,7 +414,7 @@ int-n { pins = "gpio175"; function = "gpio"; - bias-pull-up; + bias-disable; }; reset-n { -- cgit From ffe469eaa2fcc360100bfcc3c4582e83ed4dad57 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:12 +0200 Subject: arm64: dts: qcom: sc8280xp-crd: move HID pin config The HID pin configurations belong in the HID nodes rather than i2c bus node. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-3-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 6edcc10ed762..90e38ce8059f 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -203,16 +203,20 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + pinctrl-0 = <&qup0_i2c4_default>; status = "okay"; touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; }; }; @@ -228,24 +232,32 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + pinctrl-0 = <&qup2_i2c5_default>; status = "okay"; touchpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; }; }; -- cgit From cf2a7f3c525bad95e6c671fcd7226473cb1c87f8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:13 +0200 Subject: arm64: dts: qcom: sc8280xp-crd: mark HID wakeup sources The touchpad and keyboard can wake the system from suspend so declare them as wakeup sources. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-4-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 90e38ce8059f..d6f272c71a47 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -246,6 +246,8 @@ pinctrl-names = "default"; pinctrl-0 = <&tpad_default>; + + wakeup-source; }; keyboard@68 { @@ -258,6 +260,8 @@ pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; + + wakeup-source; }; }; -- cgit From e11978de1e606b8eafe553dac1282a292f527b4e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:14 +0200 Subject: arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: disable touchscreen pull-up The (optional) touchscreen interrupt line has an external pull-up so disable the internal one as is done for the keyboard and touchpad. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-5-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 84dc92dda0b8..fbe874ba4fe1 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -373,7 +373,7 @@ int-n { pins = "gpio175"; function = "gpio"; - bias-pull-up; + bias-disable; }; reset-n { -- cgit From 97cc7ab3fb4dc27cdb2e34b2626ab99053af1dc7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:15 +0200 Subject: arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: move HID pin config The HID pin configurations belong in the HID nodes rather than i2c bus node. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-6-johan+linaro@kernel.org --- .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index fbe874ba4fe1..59869e766476 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -187,7 +187,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + pinctrl-0 = <&qup0_i2c4_default>; status = "okay"; @@ -195,9 +195,13 @@ touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; }; }; @@ -213,24 +217,32 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + pinctrl-0 = <&qup2_i2c5_default>; status = "okay"; touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; + hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; + hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; }; }; -- cgit From 7093465237c55ccc292f4653478466ca769ef8dc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:16 +0200 Subject: arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: mark HID wakeup sources The touchpad and keyboard can wake the system from suspend so declare them as wakeup sources. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-7-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 59869e766476..77ac693a1186 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -231,6 +231,8 @@ pinctrl-names = "default"; pinctrl-0 = <&tpad_default>; + + wakeup-source; }; keyboard@68 { @@ -243,6 +245,8 @@ pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; + + wakeup-source; }; }; -- cgit From ca1ce7207e53cfe69aee5002eb3795069668da53 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 5 Aug 2022 11:23:17 +0200 Subject: arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add alternate touchpad Add support for the alternate (second-source) touchpad found on some X13s laptops. Note that alternate touchpad is kept disabled for now. The boot firmware should determine which device is actually populated and enable only the corresponding node. Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220805092317.4985-8-johan+linaro@kernel.org --- .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 77ac693a1186..16c6e4d920bb 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -221,6 +221,22 @@ status = "okay"; + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + + status = "disabled"; + }; + touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; -- cgit From 9deb10cf160e2d45b87cd319fbf32b2e5e2a95f1 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Thu, 23 Jun 2022 19:17:17 +0930 Subject: ARM: dts: aspeed: ast2600-evb: Update I2C devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The AST2600A3 EVB has the following I2C devices: - ADT7490 at 0x2e - EEPROM at 0xa0 - LM75 at 0x9a The bus these devices appear on can be configured by jumpers. The device tree is configured with the buses given by the default jumper settings. Signed-off-by: Joel Stanley Reviewed-by: Cédric Le Goater Reviewed-by: Ryan Chen Link: https://lore.kernel.org/r/20220623094717.3873328-1-joel@jms.id.au Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index c698e6538269..14dbeaee7ee3 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -207,11 +207,6 @@ &i2c0 { status = "okay"; - - temp@2e { - compatible = "adi,adt7490"; - reg = <0x2e>; - }; }; &i2c1 { @@ -240,10 +235,26 @@ &i2c7 { status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; }; &i2c8 { status = "okay"; + + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; }; &i2c9 { -- cgit From 6da3f55fe822088b69b69a458c412a08362f4f6d Mon Sep 17 00:00:00 2001 From: Potin Lai Date: Wed, 10 Aug 2022 00:43:37 +0000 Subject: ARM: dts: aspeed: bletchley: Add USB debug card IPMB node Add an IPMB node for USB debug card (13-0010) to support IPMI communication. Signed-off-by: Potin Lai Reviewed-by: Patrick Williams Link: https://lore.kernel.org/r/20220810004338.329832-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts index 41d2b1535d9a..385cfe18cbdd 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -7,6 +7,7 @@ #include #include #include +#include / { model = "Facebook Bletchley BMC"; @@ -857,6 +858,13 @@ multi-master; aspeed,hw-timeout-ms = <1000>; status = "okay"; + + //USB Debug Connector + ipmb13@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &gpio0 { -- cgit From 5ac309fec69738d59eccbe18a715bc497875fd0a Mon Sep 17 00:00:00 2001 From: Potin Lai Date: Wed, 10 Aug 2022 00:43:38 +0000 Subject: ARM: dts: aspeed: bletchley: Remove hdc1080 node Because of incompatible 2nd source si7021, removing hdc1080 node from device tree, and move node probe to user-space layer. Signed-off-by: Potin Lai Reviewed-by: Patrick Williams Link: https://lore.kernel.org/r/20220810004338.329832-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts index 385cfe18cbdd..1fc3e7cbf0d1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -793,11 +793,6 @@ reg = <0x4f>; }; - hdc1080@40 { - compatible = "ti,hdc1080"; - reg = <0x40>; - }; - front_leds: pca9552@67 { compatible = "nxp,pca9552"; reg = <0x67>; -- cgit From 2850335673378a54d27e215bae6ac49f65f00a28 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 26 Jul 2022 23:53:54 +0300 Subject: ARM: dts: qcom: apq8084: add rpm-stats device node Add device node for the rpm-stats pseudo device. Signed-off-by: Dmitry Baryshkov Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220726205355.598874-1-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-apq8084.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 72f9255855a1..c2e22bf3260d 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -239,6 +239,11 @@ reg = <0xf9011000 0x1000>; }; + sram@fc190000 { + compatible = "qcom,apq8084-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + qfprom: qfprom@fc4bc000 { compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; -- cgit From 47931796aad522f96df3620b8c387073d67c2332 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 26 Jul 2022 23:53:55 +0300 Subject: ARM: dts: qcom: msm8974: add rpm-stats device node Add device node for the rpm-stats pseudo device. Signed-off-by: Dmitry Baryshkov Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220726205355.598874-2-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-msm8974.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8baca2a77717..2cf9739fb86f 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -762,6 +762,11 @@ }; }; + sram@fc190000 { + compatible = "qcom,msm8974-rpm-stats"; + reg = <0xfc190000 0x10000>; + }; + etf@fc307000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0xfc307000 0x1000>; -- cgit From c9d38ff7080b2c4fa6786b82210fa13115895aae Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 20 Jul 2022 08:41:58 +0200 Subject: ARM: dts: imx6: delete interrupts property if interrupts-extended is set In most cases this is related to fsl,err006687-workaround-present, which requires a GPIO interrupt next a GIC interrupt. This fixes the dtbs_check warning: imx6dl-mba6a.dtb: ethernet@2188000: More than one condition true in oneOf schema: {'$filename': 'Documentation/devicetree/bindings/net/fsl,fec.yaml', [...] Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-riotboard.dts | 1 + arch/arm/boot/dts/imx6q-arm2.dts | 1 + arch/arm/boot/dts/imx6q-evi.dts | 1 + arch/arm/boot/dts/imx6q-mccmon6.dts | 1 + arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 1 + arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 1 + arch/arm/boot/dts/imx6qdl-tqma6a.dtsi | 1 + arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 1 + 11 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index e7d9bfbfd0e4..e7be05f205d3 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -90,6 +90,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-handle = <&rgmii_phy>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 0b40f52268b3..75586299d9ca 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -178,6 +178,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index c63f371ede8b..78d941fef5df 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -146,6 +146,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index 55692c73943d..64ab01018b71 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -100,6 +100,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 0ad4cb4f1e82..a53a5d0766a5 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -192,6 +192,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy>; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index beaa2dcd436c..57c21a01f126 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -334,6 +334,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy>; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index ee7e2371f94b..000e9dc97b1a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -263,6 +263,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 904d5d051d63..731759bdd7f5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -267,6 +267,7 @@ phy-mode = "rgmii"; phy-handle = <ðphy>; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1368a4762037..3dbb460ef102 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -295,6 +295,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi index 7dc3f0005b0f..0a36e1bce375 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi @@ -7,6 +7,7 @@ #include &fec { + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index d6ba4b2a60f6..c096d25a6f5b 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -192,6 +192,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; + /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; -- cgit From 151c67c67b6cc11b2eb03bc390621f6fd8c5004f Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 20 Jul 2022 08:47:12 +0200 Subject: ARM: dts: imx6q-mccmon6: Add fsl,err006687-workaround-present property Add property for ERR006687 hardware workaround. Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-mccmon6.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index 64ab01018b71..f08b37010291 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -103,6 +103,7 @@ /delete-property/ interrupts; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; -- cgit From cdf904c97b04e553ea9dfd45dfb5b4f82595a91a Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:34 +0200 Subject: ARM: dts: imx6-sabrelite: change to use SPDX identifiers Replace the license text with SPDX identifiers. Avoid the following checkpatch warning: arch/arm/boot/dts/imx6q-sabrelite.dts:1: warning: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 37 +---------------------------------- 1 file changed, 1 insertion(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index dc51262e7b2f..7c6a2f234ccb 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -1,43 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit From e45840c8eb0419d15ca342669aa28dfaf70c01cc Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:35 +0200 Subject: ARM: dts: imx6qdl-mba6: don't use multiple blank lines Avoid the following checkpatch warning: arch/arm/boot/dts/imx6qdl-mba6.dtsi:247: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler Acked-by: Alexander Stein Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-mba6.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi index f4dca20669d6..78555a618851 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi @@ -244,7 +244,6 @@ status = "okay"; }; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; -- cgit From 09b2152047d49bcdec8ec3f00fc73a59978d50bd Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:36 +0200 Subject: ARM: dts: imx6qdl: phytec: no spaces at start of line, indent use tabs Avoid the following checkpatch warnings: arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi:67: error: code indent should use tabs where possible arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi:67: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi index 393475cb0f4d..0020dbb1722c 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi @@ -64,7 +64,7 @@ interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_NONE>; status = "disabled"; - }; + }; }; &ipu1_di0_disp0 { -- cgit From f9065184ea2783bfa143efca1a11aa46c35003fe Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:37 +0200 Subject: ARM: dts: imx6qdl-sabre: change to use SPDX identifiers Replace the license text with SPDX identifiers. Avoid the following checkpatch warning: arch/arm/boot/dts/imx6qdl-sabrelite.dtsi:1: warning: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 37 +------------------------------- 1 file changed, 1 insertion(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 901b9a761b66..22f8e2783cdf 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -1,43 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include -- cgit From 64bbac6733c14ea652323b61504a4a7328af9174 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:38 +0200 Subject: ARM: dts: imx7d-pico: indent use tabs, no spaces at start of line Avoid the following checkpatch warning: arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs where possible arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-pico.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e519897fae08..e0bff39e8d3e 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -41,7 +41,7 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; enable-active-high; - }; + }; reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; @@ -432,7 +432,7 @@ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ >; }; @@ -493,19 +493,19 @@ pinctrl_pwm1: pwm1 { fsl,pins = < - MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f >; }; pinctrl_pwm2: pwm2 { fsl,pins = < - MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f >; }; pinctrl_pwm3: pwm3 { fsl,pins = < - MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f >; }; -- cgit From 4404c1b7b04c718031dcb709f1a1030a86eda995 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:39 +0200 Subject: ARM: dts: vf610: no spaces in indent but tabs Avoid spaces in indent but rather use tabs. Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h index f1e5a7cf58a9..8bb970b0dff8 100644 --- a/arch/arm/boot/dts/vf610-pinfunc.h +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -420,7 +420,7 @@ #define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0 #define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0 #define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0 -#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 +#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 #define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0 #define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0 #define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1 -- cgit From 005e2858660645845f51731906d87764bb98ff51 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:40 +0200 Subject: ARM: dts: vf610-twr: indent use tabs, no spaces at start of line Avoid the following checkpatch warning: arch/arm/boot/dts/vf610-twr.dts:172: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-twr.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index dbb5ffcdcec4..6c246d5aa032 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -169,7 +169,7 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&clks VF610_CLK_SAI2>; - }; + }; }; &iomuxc { -- cgit From de8aee649f866d1e441691d6e5b54693585f5827 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:41 +0200 Subject: ARM: dts: vf610: don't use multiple blank lines Avoid the following checkpatch warning: arch/arm/boot/dts/vf610.dtsi:5: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 956182d08e74..2fba923821d0 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -2,7 +2,6 @@ // // Copyright 2013 Freescale Semiconductor, Inc. - #include "vf500.dtsi" &a5_cpu { -- cgit From e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Mon, 25 Jul 2022 18:16:22 +0800 Subject: ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Use the general touchscreen method to config the max pressure for touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for ABS_PRESSURE, when config the same max and min value, weston will meet the following issue, [17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen [17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE [17:19:39.183] event1 - ADS7846 Touchscreen: was rejected [17:19:39.183] event1 - not using input device '/dev/input/event1' This will then cause the APP weston-touch-calibrator can't list touch devices. root@imx6ul7d:~# weston-touch-calibrator could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' No devices listed. And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max" belong to the deprecated properties, so remove them. Also for "ti,x-min", "ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default value in driver, so are redundant, also remove here. Signed-off-by: Haibo Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 78f4224a9bf4..e93b9cd9c27b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -206,12 +206,7 @@ interrupt-parent = <&gpio2>; interrupts = <29 0>; pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0>; - ti,x-plate-ohms = /bits/ 16 <400>; + touchscreen-max-pressure = <255>; wakeup-source; }; }; -- cgit From bae57eacc0dbc09dcf64113656e2a913115f5a70 Mon Sep 17 00:00:00 2001 From: David Jander Date: Tue, 26 Jul 2022 14:32:21 +0200 Subject: ARM: dts: imx6qdl-vicut1.dtsi: Add backlight-isb node On some older hardware models this is needed. It will do no harm if used with newer models though. Signed-off-by: David Jander Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index a1676b5d2980..8a2512f3f378 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -37,6 +37,16 @@ power-supply = <®_3v3>; }; + /* only for backwards compatibility with old HW */ + backlight_isb: backlight-isb { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = <0 8 48 255>; + num-interpolated-steps = <5>; + default-brightness-level = <0>; + power-supply = <®_3v3>; + }; + connector { compatible = "composite-video-connector"; label = "Composite0"; @@ -370,6 +380,12 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; @@ -601,6 +617,12 @@ >; }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b0 + >; + }; + pinctrl_pwm3: pwm3grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 -- cgit From 5694eed98cca5c164ebb5b831b65b4c9eee4b2d5 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Tue, 26 Jul 2022 15:05:20 +0200 Subject: ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios property. The reset-assert-us value is taken from the existing logic since the fec driver will add an 1ms assert delay per default if phy-reset-gpios is used and phy-reset-duration is not specified. Signed-off-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 095c9143d99a..7001c8c5e19b 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -270,7 +270,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + }; + }; }; &i2c_intern { -- cgit From afd8f77957e3e83adf21d9229c61ff37f44a177a Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 26 Jul 2022 15:05:23 +0200 Subject: ARM: dts: imx6qdl-kontron-samx6i: hook up DDC i2c bus i2c2 is routed to the pins dedicated as DDC in the module standard. Reduce clock rate to 100kHz to be in line with VESA standard and hook this bus up to the HDMI node. Fixes: 708ed2649ad8 ("ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency") Signed-off-by: Lucas Stach [m.felsch@pengutronix.de: add fixes line] Signed-off-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 7001c8c5e19b..df39a4635541 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -285,6 +285,10 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; +}; + &i2c_intern { pmic@8 { compatible = "fsl,pfuze100"; @@ -409,7 +413,7 @@ /* HDMI_CTRL */ &i2c2 { - clock-frequency = <375000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; }; -- cgit From 4c95e73647057397e743840612674efbe21eeea4 Mon Sep 17 00:00:00 2001 From: Kuldeep Singh Date: Mon, 8 Aug 2022 00:06:45 +0530 Subject: ARM: dts: ls1021a: Use generic node name for DMA DT spec expects generic DMA controller node name as "dma-controller" to enable validations. Signed-off-by: Kuldeep Singh Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index fa761620f073..7c5510e34494 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -647,7 +647,7 @@ status = "disabled"; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, -- cgit From dac772cbd755d5b0ae0242c826d33b089bbd43c1 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 10 Aug 2022 12:34:48 +0200 Subject: ARM: dts: imx6qdl-tqma6x: add fixed power supplies Add fixed power supplies to the EEPROM nodes to suppress a warning: at24 2-0050: supply vcc not found, using dummy regulator Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-tqma6a.dtsi | 1 + arch/arm/boot/dts/imx6qdl-tqma6b.dtsi | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi index 0a36e1bce375..aff46f3040c1 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi @@ -36,6 +36,7 @@ compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; + vcc-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi index dd0925766440..a3f6543c3aaa 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi @@ -29,5 +29,6 @@ compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; pagesize = <32>; + vcc-supply = <®_3p3v>; }; }; -- cgit From 34caa12608b6b1376e5e3f51ac63d0ff7e128704 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 14:10:06 +0300 Subject: ARM: dts: imx: align SPI node name with dtschema The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-cfa10049.dts | 4 ++-- arch/arm/boot/dts/imx28-cfa10055.dts | 2 +- arch/arm/boot/dts/imx28-cfa10056.dts | 2 +- arch/arm/boot/dts/imx28-tx28.dts | 2 +- arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +- arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 2 +- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a92b05ef390f..ff1b450c0717 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -327,7 +327,7 @@ }; }; - spi2 { + spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10049>; @@ -351,7 +351,7 @@ }; }; - spi3 { + spi-3 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi3_pins_cfa10049>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index d05c370dfc17..fac5bbda7a93 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -129,7 +129,7 @@ }; }; - spi2 { + spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10055>; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c1060bd5f17f..c5f3337e8b39 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -88,7 +88,7 @@ }; }; - spi2 { + spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10056>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 6d7b044fec5b..096f246032c6 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -221,7 +221,7 @@ linux,no-autorepeat; }; - spi_gpio: spi-gpio { + spi_gpio: spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index ec8ca3ac2c1c..3140f038aa98 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -137,7 +137,7 @@ }; }; - spi_gpio: spi-gpio { + spi_gpio: spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 1a18c41ce385..c83e64a62d8a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -82,7 +82,7 @@ "AMIC", "MICB"; }; - spi4 { + spi-4 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index c485d058e079..15ee0275feaf 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -212,7 +212,7 @@ enable-active-high; }; - spi_gpio: spi-gpio { + spi_gpio: spi { #address-cells = <1>; #size-cells = <0>; compatible = "spi-gpio"; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index e93b9cd9c27b..2b8f4248053b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -39,7 +39,7 @@ }; }; - spi4 { + spi-4 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; -- cgit From 1bad8bca9020472553a4db6bf9e1ee149fe97f03 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 14:10:07 +0300 Subject: ARM: dts: imx: align LED node names with dtschema The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-apf51dev.dts | 2 +- arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +- arch/arm/boot/dts/imx6q-novena.dts | 2 +- arch/arm/boot/dts/imx7d-zii-rmu2.dts | 2 +- arch/arm/boot/dts/imx7d-zii-rpu2.dts | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index c66f274ba4e9..b61d55ca1467 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -63,7 +63,7 @@ leds { compatible = "gpio-leds"; - user { + led-user { label = "Heartbeat"; gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index fe4244044a0f..d6a87c0c2934 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -71,7 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_gpio7_7>; - user { + led-user { label = "Heartbeat"; gpios = <&gpio7 7 0>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 225cf6b7a7a4..f8a8dd3e069f 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds_novena>; - heartbeat { + led-heartbeat { label = "novena:white:panel"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 1065941807e8..1c9f25848bf7 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -24,7 +24,7 @@ pinctrl-0 = <&pinctrl_leds_debug>; pinctrl-names = "default"; - debug { + led-debug { label = "zii:green:debug1"; gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 893bd30aa2a3..9d29490ab4c9 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -36,7 +36,7 @@ pinctrl-0 = <&pinctrl_leds_debug>; pinctrl-names = "default"; - debug { + led-debug { label = "zii:green:debug1"; gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; -- cgit From e067767e450f6f2d9aeb9825df655430f83d79dc Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 14:10:08 +0300 Subject: ARM: dts: imx: align gpio-keys node names with dtschema The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-xfi3.dts | 6 ++-- .../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 4 +-- arch/arm/boot/dts/imx28-cfa10049.dts | 4 +-- arch/arm/boot/dts/imx28-duckbill-2-enocean.dts | 2 +- arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi | 8 +++--- .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 4 +-- arch/arm/boot/dts/imx50-kobo-aura.dts | 6 ++-- arch/arm/boot/dts/imx51-babbage.dts | 2 +- arch/arm/boot/dts/imx53-ard.dts | 10 +++---- arch/arm/boot/dts/imx53-qsb-common.dtsi | 6 ++-- arch/arm/boot/dts/imx53-smd.dts | 4 +-- arch/arm/boot/dts/imx53-tx53.dtsi | 2 +- arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 8 +++--- arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 2 +- arch/arm/boot/dts/imx6dl-prtmvt.dts | 32 +++++++++++----------- arch/arm/boot/dts/imx6dl-prtvt7.dts | 30 ++++++++++---------- arch/arm/boot/dts/imx6dl-victgo.dts | 4 +-- arch/arm/boot/dts/imx6q-novena.dts | 2 +- arch/arm/boot/dts/imx6q-pistachio.dts | 2 +- arch/arm/boot/dts/imx6q-utilite-pro.dts | 2 +- arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 6 ++-- arch/arm/boot/dts/imx7d-sdb.dts | 4 +-- 22 files changed, 75 insertions(+), 75 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts index a6213c590f94..b1d8210f3ecc 100644 --- a/arch/arm/boot/dts/imx23-xfi3.dts +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -158,19 +158,19 @@ default-brightness-level = <6>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - voldown { + key-voldown { label = "volume-down"; linux,code = <114>; gpios = <&gpio2 7 0>; debounce-interval = <20>; }; - volup { + key-volup { label = "volume-up"; linux,code = <115>; gpios = <&gpio2 8 0>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 3f38c2e60a74..c7207ea437c4 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -13,12 +13,12 @@ model = "Eukrea MBIMXSD25"; compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; - bp1 { + button { label = "BP1"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index ff1b450c0717..9ef0d567ea48 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -388,12 +388,12 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&rotary_btn_pins_cfa10049>; - rotary_button { + rotary-button { label = "rotary_button"; gpios = <&gpio3 26 1>; debounce-interval = <10>; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index bacb846f99e3..73f521c46c1e 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -204,7 +204,7 @@ pinctrl-names = "default"; pinctrl-0 = <&enocean_button>; - enocean { + key-enocean { label = "EnOcean"; linux,code = ; gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 3280fddaaf0d..b285a946e2c2 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -19,12 +19,12 @@ default-brightness-level = <10>; }; - button-sw3 { + gpio-keys-0 { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>; - sw3 { + switch-sw3 { label = "SW3"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,code = ; @@ -32,12 +32,12 @@ }; }; - button-sw4 { + gpio-keys-1 { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>; - sw4 { + switch-sw4 { label = "SW4"; gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index b1c11170ac25..7f4f812b0811 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -13,12 +13,12 @@ model = "Eukrea CPUIMX35"; compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_bp1>; - bp1 { + button { label = "BP1"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts index 82ce8c43be86..51bf6117fb12 100644 --- a/arch/arm/boot/dts/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -38,20 +38,20 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; - power { + key-power { label = "Power Button"; gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; linux,code = ; }; - hallsensor { + event-hallsensor { label = "Hallsensor"; gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; linux,code = ; linux,input-type = ; }; - frontlight { + event-frontlight { label = "Frontlight"; gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 552196d8a60a..a1f9c6a72275 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -154,7 +154,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 6208fbb2e741..23a7492e2929 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -61,34 +61,34 @@ gpio-keys { compatible = "gpio-keys"; - home { + key-home { label = "Home"; gpios = <&gpio5 10 0>; linux,code = ; wakeup-source; }; - back { + key-back { label = "Back"; gpios = <&gpio5 11 0>; linux,code = ; wakeup-source; }; - program { + key-program { label = "Program"; gpios = <&gpio5 12 0>; linux,code = ; wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio5 13 0>; linux,code = ; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio4 0 0>; linux,code = ; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index d6a87c0c2934..50fef8dd3675 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -45,20 +45,20 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power Button"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; linux,code = ; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 9be44e807188..f8d17967a67e 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -19,13 +19,13 @@ gpio-keys { compatible = "gpio-keys"; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio2 14 0>; linux,code = ; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio2 15 0>; linux,code = ; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 8712e9851465..892dd1a4bac3 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_key>; - power { + key-power { label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <116>; /* KEY_POWER */ diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index d9de9b4f0c52..d477a937b47a 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -6,7 +6,7 @@ keyboard { compatible = "gpio-keys"; - btn0 { + button-0 { gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>; label = "btn0"; linux,code = ; @@ -14,7 +14,7 @@ wakeup-source; }; - btn1 { + button-1 { gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>; label = "btn1"; linux,code = ; @@ -22,7 +22,7 @@ wakeup-source; }; - btn2 { + button-2 { gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>; label = "btn2"; linux,code = ; @@ -30,7 +30,7 @@ wakeup-source; }; - btn3 { + button-3 { gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>; label = "btn3"; linux,code = ; diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi index ec5b66453156..337db29b0010 100644 --- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi +++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi @@ -188,7 +188,7 @@ rotary-encoder-key { compatible = "gpio-keys"; - rotary-encoder-press { + rotary-encoder-event { label = "rotary-encoder press"; gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index a35a1c66e770..1f8cddd83ccb 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -51,98 +51,98 @@ pinctrl-0 = <&pinctrl_gpiokeys>; autorepeat; - power { + key-power { label = "Power Button"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - f1 { + key-f1 { label = "GPIO Key F1"; linux,code = ; gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; }; - f2 { + key-f2 { label = "GPIO Key F2"; linux,code = ; gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; }; - f3 { + key-f3 { label = "GPIO Key F3"; linux,code = ; gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; }; - f4 { + key-f4 { label = "GPIO Key F4"; linux,code = ; gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; }; - f5 { + key-f5 { label = "GPIO Key F5"; linux,code = ; gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; }; - cycle { + key-cycle { label = "GPIO Key CYCLE"; linux,code = ; gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; }; - esc { + key-esc { label = "GPIO Key ESC"; linux,code = ; gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; }; - up { + key-up { label = "GPIO Key UP"; linux,code = ; gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; }; - down { + key-down { label = "GPIO Key DOWN"; linux,code = ; gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; }; - ok { + key-ok { label = "GPIO Key OK"; linux,code = ; gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; }; - f6 { + key-f6 { label = "GPIO Key F6"; linux,code = ; gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; }; - f7 { + key-f7 { label = "GPIO Key F7"; linux,code = ; gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; }; - f8 { + key-f8 { label = "GPIO Key F8"; linux,code = ; gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; }; - f9 { + key-f9 { label = "GPIO Key F9"; linux,code = ; gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; }; - f10 { + key-f10 { label = "GPIO Key F10"; linux,code = ; gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index 0a0b7acddfb2..a1eb53851794 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -62,91 +62,91 @@ compatible = "gpio-keys"; autorepeat; - esc { + key-esc { label = "GPIO Key ESC"; linux,code = ; gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; }; - up { + key-up { label = "GPIO Key UP"; linux,code = ; gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; }; - down { + key-down { label = "GPIO Key DOWN"; linux,code = ; gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; }; - enter { + key-enter { label = "GPIO Key Enter"; linux,code = ; gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; }; - cycle { + key-cycle { label = "GPIO Key CYCLE"; linux,code = ; gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; }; - f1 { + key-f1 { label = "GPIO Key F1"; linux,code = ; gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; }; - f2 { + key-f2 { label = "GPIO Key F2"; linux,code = ; gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; }; - f3 { + key-f3 { label = "GPIO Key F3"; linux,code = ; gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; }; - f4 { + key-f4 { label = "GPIO Key F4"; linux,code = ; gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; }; - f5 { + key-f5 { label = "GPIO Key F5"; linux,code = ; gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; }; - f6 { + key-f6 { label = "GPIO Key F6"; linux,code = ; gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; }; - f7 { + key-f7 { label = "GPIO Key F7"; linux,code = ; gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; }; - f8 { + key-f8 { label = "GPIO Key F8"; linux,code = ; gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; }; - f9 { + key-f9 { label = "GPIO Key F9"; linux,code = ; gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; }; - f10 { + key-f10 { label = "GPIO Key F10"; linux,code = ; gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 779b52858a25..72df1dba83be 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -18,14 +18,14 @@ pinctrl-0 = <&pinctrl_gpiokeys>; autorepeat; - power { + key-power { label = "Power Button"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - enter { + key-enter { label = "Rotary Key"; gpios = <&gpio2 05 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index f8a8dd3e069f..ee8c0bd3ecfd 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -86,7 +86,7 @@ linux,code = ; }; - lid { + lid-event { label = "Lid"; gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; linux,input-type = <5>; /* EV_SW */ diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index 7a33e54cc0f1..bad8d831e64e 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -100,7 +100,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; wakeup-source; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index d16ff2083d62..ad59b23ef27a 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -89,7 +89,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index 63550351340d..2290c1237634 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; autorepeat; - back { + key-back { gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; linux,code = ; label = "Key Back"; @@ -37,7 +37,7 @@ wakeup-source; }; - home { + key-home { gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = ; label = "Key Home"; @@ -46,7 +46,7 @@ wakeup-source; }; - menu { + key-menu { gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; linux,code = ; label = "Key Menu"; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 2b8f4248053b..f483bc0afe5e 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -24,14 +24,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = ; -- cgit From b709c5a39e7ea3495d5524c9b57eb86f4b4ae255 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 14:10:53 +0300 Subject: ARM: dts: vf610: align SPI node name with dtschema The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-bk4.dts | 2 +- arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 830c85476b3d..551a4c3ff4fa 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -61,7 +61,7 @@ regulator-max-microvolt = <3300000>; }; - spi-gpio { + spi { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 1f9686c33a84..42ed4a04a12e 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -288,7 +288,7 @@ }; }; - spi0 { + spi-0 { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi0>; pinctrl-names = "default"; -- cgit From 0fcf85d89de30ad2d9d9836376aacaf329d1b022 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 15 Aug 2022 10:28:11 +0200 Subject: ARM: dts: imx6ul-kontron: Simplify devicetree structure There is no need in differentiating between the different SoM versions that only differ in memory size, etc. It's much cleaner to simplify the devicetrees and let them be more generic. If necessary the bootloader will update the devicetree dynamically to contain the correct size of the memory. We also get rid of the N6xxx notation in the compatibles and file names, as they are not really used anymore and often result in confusion. This is a breaking change, but the impact shouldn't be too big and it makes usage and maintenance easier in the future. Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/imx6ul-kontron-bl-43.dts | 103 ++++++ arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi | 405 +++++++++++++++++++++ arch/arm/boot/dts/imx6ul-kontron-bl.dts | 16 + arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts | 103 ------ arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 17 - arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi | 41 --- arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts | 16 - arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi | 40 -- arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 405 --------------------- .../boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 122 ------- arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi | 137 +++++++ arch/arm/boot/dts/imx6ul-kontron-sl.dtsi | 14 + arch/arm/boot/dts/imx6ull-kontron-bl.dts | 15 + arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts | 16 - arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi | 40 -- arch/arm/boot/dts/imx6ull-kontron-sl.dtsi | 13 + 17 files changed, 705 insertions(+), 802 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ul-kontron-bl-43.dts create mode 100644 arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-kontron-bl.dts delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi delete mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-kontron-sl.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-kontron-bl.dts delete mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts delete mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-kontron-sl.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..b151133801e8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -706,8 +706,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ - imx6ul-kontron-n6310-s.dtb \ - imx6ul-kontron-n6310-s-43.dtb \ + imx6ul-kontron-bl.dtb \ + imx6ul-kontron-bl-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-tqma6ul1-mba6ulx.dtb \ imx6ul-tqma6ul2-mba6ulx.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts new file mode 100644 index 000000000000..0c643706a158 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski + */ + +#include "imx6ul-kontron-bl.dts" + +/ { + model = "Kontron BL i.MX6UL 43 (N631X S 43)"; + compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul", + "kontron,sl-imx6ul", "fsl,imx6ul"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm7 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; +}; + +&i2c4 { + touchscreen@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cap_touch>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + /* Leave status disabled because of missing display panel node */ +}; + +&pwm7 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&iomuxc { + pinctrl_cap_touch: captouchgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */ + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */ + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi new file mode 100644 index 000000000000..43868311f48a --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski + */ + +#include + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl.dts b/arch/arm/boot/dts/imx6ul-kontron-bl.dts new file mode 100644 index 000000000000..dadf6d3d5f52 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-bl.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski + */ + +/dts-v1/; + +#include "imx6ul-kontron-sl.dtsi" +#include "imx6ul-kontron-bl-common.dtsi" + +/ { + model = "Kontron BL i.MX6UL (N631X S)"; + compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts deleted file mode 100644 index 5bfad4655b22..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts +++ /dev/null @@ -1,103 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - * Copyright (c) 2019 Krzysztof Kozlowski - */ - -#include "imx6ul-kontron-n6310-s.dts" - -/ { - model = "Kontron N6310 S 43"; - compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s", - "kontron,imx6ul-n6310-som", "fsl,imx6ul"; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm7 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; - }; -}; - -&i2c4 { - touchscreen@5d { - compatible = "goodix,gt928"; - reg = <0x5d>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cap_touch>; - interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; - irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; - }; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - /* Leave status disabled because of missing display panel node */ -}; - -&pwm7 { - #pwm-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm7>; - status = "okay"; -}; - -&iomuxc { - pinctrl_cap_touch: captouchgrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */ - MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */ - MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */ - >; - }; - - pinctrl_lcdif_ctrl: lcdifctrlgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 - MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79 - >; - }; - - pinctrl_lcdif_dat: lcdifdatgrp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 - >; - }; - - pinctrl_pwm7: pwm7grp { - fsl,pins = < - MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts deleted file mode 100644 index 5a3e06d6219b..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - * Copyright (c) 2019 Krzysztof Kozlowski - */ - -/dts-v1/; - -#include "imx6ul-kontron-n6310-som.dtsi" -#include "imx6ul-kontron-n6x1x-s.dtsi" - -/ { - model = "Kontron N6310 S"; - compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", - "fsl,imx6ul"; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi deleted file mode 100644 index acd936540d89..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - * Copyright (c) 2019 Krzysztof Kozlowski - */ - -#include "imx6ul.dtsi" -#include "imx6ul-kontron-n6x1x-som-common.dtsi" - -/ { - model = "Kontron N6310 SOM"; - compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul"; - - memory@80000000 { - reg = <0x80000000 0x10000000>; - device_type = "memory"; - }; -}; - -&qspi { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - spi-max-frequency = <108000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - reg = <0>; - - partition@0 { - label = "ubi1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "ubi2"; - reg = <0x08000000 0x08000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts deleted file mode 100644 index 239a1af3aeaa..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx6ul-kontron-n6311-som.dtsi" -#include "imx6ul-kontron-n6x1x-s.dtsi" - -/ { - model = "Kontron N6311 S"; - compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som", - "fsl,imx6ul"; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi deleted file mode 100644 index 29ed38dce580..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - */ - -#include "imx6ul.dtsi" -#include "imx6ul-kontron-n6x1x-som-common.dtsi" - -/ { - model = "Kontron N6311 SOM"; - compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul"; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - device_type = "memory"; - }; -}; - -&qspi { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - spi-max-frequency = <104000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - reg = <0>; - - partition@0 { - label = "ubi1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "ubi2"; - reg = <0x08000000 0x18000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi deleted file mode 100644 index 43868311f48a..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ /dev/null @@ -1,405 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - * Copyright (c) 2019 Krzysztof Kozlowski - */ - -#include - -/ { - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led1 { - label = "debug-led1"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - - led2 { - label = "debug-led2"; - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "debug-led3"; - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - pwm-beeper { - compatible = "pwm-beeper"; - pwms = <&pwm8 0 5000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_vref_adc: regulator-vref-adc { - compatible = "regulator-fixed"; - regulator-name = "vref-adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&adc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc1>; - vref-supply = <®_vref_adc>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&ecspi1 { - cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - eeprom@0 { - compatible = "anvo,anv32e61w", "atmel,at25"; - reg = <0>; - spi-max-frequency = <20000000>; - spi-cpha; - spi-cpol; - pagesize = <1>; - size = <8192>; - address-width = <16>; - }; -}; - -&fec1 { - pinctrl-0 = <&pinctrl_enet1>; - /delete-node/ mdio; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy2>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET2_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; -}; - -&pwm8 { - #pwm-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm8>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - linux,rs485-enabled-at-boot-time; - rs485-rx-during-tx; - rs485-rts-active-low; - uart-has-rtscts; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1>; - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - over-current-active-low; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - vbus-supply = <®_5v>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - non-removable; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; - - pinctrl_adc1: adc1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 - MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 - >; - }; - - pinctrl_enet2_mdio: enet2mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp{ - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ - MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ - MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ - MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ - MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 - MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 - >; - }; - - pinctrl_pwm8: pwm8grp { - fsl,pins = < - MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 - /* - * mux unused RTS to make sure it doesn't cause - * any interrupts when it is undefined - */ - MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 - MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1: usbotg1 { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi deleted file mode 100644 index 09a83dbdf651..000000000000 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - * Copyright (c) 2019 Krzysztof Kozlowski - */ - -#include - -/ { - chosen { - stdout-path = &uart4; - }; -}; - -&ecspi2 { - cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - status = "okay"; - - flash@0 { - compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&fec2 { - phy-mode = "rmii"; - status = "disabled"; -}; - -&qspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_out>; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 - MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 - >; - }; - - pinctrl_enet1_mdio: enet1mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - >; - }; - - pinctrl_qspi: qspigrp { - fsl,pins = < - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 - >; - }; - - pinctrl_reset_out: rstoutgrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi new file mode 100644 index 000000000000..dcf88f610346 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski + */ + +#include + +/ { + chosen { + stdout-path = &uart4; + }; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + device_type = "memory"; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + flash@0 { + compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + phy-mode = "rmii"; + status = "disabled"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + }; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_out>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + >; + }; + + pinctrl_enet1_mdio: enet1mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_reset_out: rstoutgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi new file mode 100644 index 000000000000..0580d043e5ae --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-sl-common.dtsi" + +/ { + model = "Kontron SL i.MX6UL (N631X SOM)"; + compatible = "kontron,sl-imx6ul", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/imx6ull-kontron-bl.dts new file mode 100644 index 000000000000..fa016465cdbc --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-bl.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-sl.dtsi" +#include "imx6ul-kontron-bl-common.dtsi" + +/ { + model = "Kontron BL i.MX6ULL (N641X S)"; + compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts deleted file mode 100644 index 57588a5e1e34..000000000000 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx6ull-kontron-n6411-som.dtsi" -#include "imx6ul-kontron-n6x1x-s.dtsi" - -/ { - model = "Kontron N6411 S"; - compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som", - "fsl,imx6ull"; -}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi deleted file mode 100644 index d000606c0704..000000000000 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2017 exceet electronics GmbH - * Copyright (C) 2018 Kontron Electronics GmbH - */ - -#include "imx6ull.dtsi" -#include "imx6ul-kontron-n6x1x-som-common.dtsi" - -/ { - model = "Kontron N6411 SOM"; - compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull"; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - device_type = "memory"; - }; -}; - -&qspi { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - spi-max-frequency = <104000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - reg = <0>; - - partition@0 { - label = "ubi1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "ubi2"; - reg = <0x08000000 0x18000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi new file mode 100644 index 000000000000..93f10eb3494f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-sl-common.dtsi" + +/ { + model = "Kontron SL i.MX6ULL (N641X SOM)"; + compatible = "kontron,sl-imx6ull", "fsl,imx6ull"; +}; -- cgit From 7e4bf4d8debc51810cc3ed2c0d3f0c21d2c41dd5 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 15 Aug 2022 10:28:12 +0200 Subject: ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile The imx6ull-kontron-bl.dtb wasn't build as part of the CONFIG_SOC_IMX6UL option. Add it to the list. Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b151133801e8..e49185119b5b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -736,6 +736,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-wifi-iris.dtb \ imx6ull-colibri-wifi-iris-v2.dtb \ imx6ull-jozacp.dtb \ + imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ -- cgit From 3591be2e8a81efbf5ec6d3d68067a90225897c3e Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Tue, 16 Aug 2022 14:41:33 +0200 Subject: ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file The SoM itself provides the display interface, see [1] page 20. Those pins have to be used as the RGB/DPI interface or not used at all. So rather than duplicate the pinmux settings in every carrier board DT, better move them into the SoM DTSI. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf Signed-off-by: Christoph Niedermaier Acked-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi | 33 ------------------------------- arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi | 33 +++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi index fe72650295a5..6248b126b557 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi @@ -332,37 +332,4 @@ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */ >; }; - - pinctrl_ipu1_lcdif: ipu1-lcdif-grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi index 5befbe13d1a3..eaa87b333164 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi @@ -667,6 +667,39 @@ >; }; + pinctrl_ipu1_lcdif: ipu1-lcdif-grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + >; + }; + pinctrl_pcie: pcie-grp { fsl,pins = < MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 /* Wake */ -- cgit From 7adc69f8ac35109eab2742e6bb7a747dd811d1f6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 26 Jul 2022 23:01:09 +0200 Subject: arm64: dts: renesas: r8a779f0: Add TMU nodes Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220726210110.1444-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 65 +++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 5aff5a23cf06..11c30e36a962 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -404,6 +404,71 @@ #thermal-sensor-cells = <1>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 713>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 714>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 715>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 716>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a779f0", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 717>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779f0", "renesas,rcar-gen4-i2c"; -- cgit From 200d8e0119fd8fef78fa1c6441ef9eb2c1570984 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Thu, 28 Jul 2022 13:23:10 +0100 Subject: arm64: dts: renesas: r9a07g043: Add DMA support to RSPI Add DMA properties to RSPI nodes to support DMA operation. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20220728122312.189766-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index 40201a16d653..f61459a98c51 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -196,6 +196,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>; resets = <&cpg R9A07G043_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -212,6 +214,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>; resets = <&cpg R9A07G043_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -228,6 +232,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>; resets = <&cpg R9A07G043_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; -- cgit From a43026b811700455f36bc788e480921f7d1d3e95 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Thu, 28 Jul 2022 13:23:11 +0100 Subject: arm64: dts: renesas: r9a07g044: Add DMA support to RSPI Add DMA properties to RSPI nodes to support DMA operation. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20220728122312.189766-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index cfdcca1cf9c6..fa7419ba4d2a 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -261,6 +261,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>; resets = <&cpg R9A07G044_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -277,6 +279,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>; resets = <&cpg R9A07G044_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -293,6 +297,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>; resets = <&cpg R9A07G044_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; -- cgit From 34fac90f361f14aad0d0bfeabba9211fd584a963 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Thu, 28 Jul 2022 13:23:12 +0100 Subject: arm64: dts: renesas: r9a07g054: Add DMA support to RSPI Add DMA properties to RSPI nodes to support DMA operation. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20220728122312.189766-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 24611e4a7913..215a033ade81 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -261,6 +261,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>; resets = <&cpg R9A07G054_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -277,6 +279,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>; resets = <&cpg R9A07G054_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; @@ -293,6 +297,8 @@ interrupt-names = "error", "rx", "tx"; clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>; resets = <&cpg R9A07G054_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; power-domains = <&cpg>; num-cs = <1>; #address-cells = <1>; -- cgit From 56f0a373f0a8f9e4a783aa600c11f00ca33398e5 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Fri, 29 Jul 2022 09:45:27 +0100 Subject: arm64: dts: renesas: r9a07g043: Fix audio clk node names Replace the clk node names audio-clk{1,2} with audio{1,2}-clk as per the device tree specification. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20220729084527.388023-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index f61459a98c51..d1b567d1b6e1 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -13,14 +13,14 @@ #address-cells = <2>; #size-cells = <2>; - audio_clk1: audio-clk1 { + audio_clk1: audio1-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ clock-frequency = <0>; }; - audio_clk2: audio-clk2 { + audio_clk2: audio2-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ -- cgit From f3b7bc89c97b98aa6f157d5f296695af8940a5ac Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 2 Aug 2022 11:15:32 +0100 Subject: arm64: dts: renesas: r9a07g044: Fix SCI{Rx,Tx} interrupt types As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022), the interrupt type of SCI{Rx,Tx} is edge triggered. Signed-off-by: Biju Das Fixes: f9a2adcc9e908907 ("arm64: dts: renesas: r9a07g044: Add SCI[0-1] nodes") Link: https://lore.kernel.org/r/20220802101534.1401342-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index fa7419ba4d2a..35e7255471b8 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -400,8 +400,8 @@ compatible = "renesas,r9a07g044-sci", "renesas,sci"; reg = <0 0x1004d000 0 0x400>; interrupts = , - , - , + , + , ; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>; @@ -415,8 +415,8 @@ compatible = "renesas,r9a07g044-sci", "renesas,sci"; reg = <0 0x1004d400 0 0x400>; interrupts = , - , - , + , + , ; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>; -- cgit From 13dec051c7f139eef345c55a60941843e72128f1 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 2 Aug 2022 11:15:33 +0100 Subject: arm64: dts: renesas: r9a07g054: Fix SCI{Rx,Tx} interrupt types As per the RZ/V2L Hardware User's Manual (Rev.1.00 Nov, 2021), the interrupt type of SCI{Rx,Tx} is edge triggered. Signed-off-by: Biju Das Fixes: 7c2b8198f4f321df ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC") Link: https://lore.kernel.org/r/20220802101534.1401342-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 215a033ade81..d27b6c388580 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -405,8 +405,8 @@ compatible = "renesas,r9a07g054-sci", "renesas,sci"; reg = <0 0x1004d000 0 0x400>; interrupts = , - , - , + , + , ; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>; @@ -420,8 +420,8 @@ compatible = "renesas,r9a07g054-sci", "renesas,sci"; reg = <0 0x1004d400 0 0x400>; interrupts = , - , - , + , + , ; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>; -- cgit From 72a482dbaec4b9e4d54b81be6bdb8c016fd2f4bd Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 2 Aug 2022 11:15:34 +0100 Subject: arm64: dts: renesas: r9a07g043: Fix SCI{Rx,Tx} interrupt types As per the RZ/G2UL Hardware User's Manual (Rev.1.00 Apr, 2022), the interrupt type of SCI{Rx,Tx} is edge triggered. Signed-off-by: Biju Das Fixes: cf40c9689e5109bf ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC") Link: https://lore.kernel.org/r/20220802101534.1401342-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index d1b567d1b6e1..ff6aab388eb7 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -340,8 +340,8 @@ compatible = "renesas,r9a07g043-sci", "renesas,sci"; reg = <0 0x1004d000 0 0x400>; interrupts = , - , - , + , + , ; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>; @@ -355,8 +355,8 @@ compatible = "renesas,r9a07g043-sci", "renesas,sci"; reg = <0 0x1004d400 0 0x400>; interrupts = , - , - , + , + , ; interrupt-names = "eri", "rxi", "txi", "tei"; clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>; -- cgit From 73ca80daf7b37b260f01cc4ce7963f48d8b5183f Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Thu, 4 Aug 2022 20:08:46 +0100 Subject: arm64: dts: renesas: r9a09g011: Add pinctrl node Signed-off-by: Phil Edworthy Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220804190846.128370-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 50 ++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index d4cc5459fbb7..44e1e288343c 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -132,6 +132,56 @@ clock-names = "sclk", "pclk"; status = "disabled"; }; + + pinctrl: pinctrl@b6250000 { + compatible = "renesas,r9a09g011-pinctrl"; + reg = <0 0xb6250000 0 0x800>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 352>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_PFC_PRESETN>; + }; }; timer { -- cgit From ac94f66521a5488eccdded4036b0ec039ceb87d5 Mon Sep 17 00:00:00 2001 From: Chanho Park Date: Fri, 29 Jul 2022 09:30:22 +0900 Subject: arm64: dts: exynosautov9: add fsys0/1 clock DT nodes Add cmu_fsys0 and cmu_fsys1 for PCIe clocks and USB/MMC clocks respectively. Signed-off-by: Chanho Park Reviewed-by: Chanwoo Choi [krzk: put nodes ordered by unit address] Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/50f8145bca30cf5c900359d0b78c1c617090e021.1659054220.git.chanho61.park@samsung.com --- arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 2013718532f3..5dc361734cfe 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -207,6 +207,34 @@ "dout_clkcmu_peric1_ip"; }; + cmu_fsys1: clock-controller@17040000 { + compatible = "samsung,exynosautov9-cmu-fsys1"; + reg = <0x17040000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS1_BUS>, + <&cmu_top GOUT_CLKCMU_FSYS1_MMC_CARD>, + <&cmu_top DOUT_CLKCMU_FSYS1_USBDRD>; + clock-names = "oscclk", + "dout_clkcmu_fsys1_bus", + "gout_clkcmu_fsys1_mmc_card", + "dout_clkcmu_fsys1_usbdrd"; + }; + + cmu_fsys0: clock-controller@17700000 { + compatible = "samsung,exynosautov9-cmu-fsys0"; + reg = <0x17700000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS0_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS0_PCIE>; + clock-names = "oscclk", + "dout_clkcmu_fsys0_bus", + "dout_clkcmu_fsys0_pcie"; + }; + cmu_fsys2: clock-controller@17c00000 { compatible = "samsung,exynosautov9-cmu-fsys2"; reg = <0x17c00000 0x8000>; -- cgit From 2c8cf49c7dec4b5f7323588279aa9e8a4174ebf9 Mon Sep 17 00:00:00 2001 From: Sam Protsenko Date: Tue, 9 Aug 2022 14:33:22 +0300 Subject: arm64: dts: exynos: Add CMU_AUD, CMU_IS and CMU_MFCMSCL for Exynos850 Add missing clock domains to Exynos850 SoC device tree. Signed-off-by: Sam Protsenko Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220809113323.29965-9-semen.protsenko@linaro.org --- arch/arm64/boot/dts/exynos/exynos850.dtsi | 38 +++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index 9076afd4bb3e..8e78b50416d8 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -286,6 +286,21 @@ clock-names = "oscclk"; }; + cmu_mfcmscl: clock-controller@12c00000 { + compatible = "samsung,exynos850-cmu-mfcmscl"; + reg = <0x12c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_MFCMSCL_MFC>, + <&cmu_top CLK_DOUT_MFCMSCL_M2M>, + <&cmu_top CLK_DOUT_MFCMSCL_MCSC>, + <&cmu_top CLK_DOUT_MFCMSCL_JPEG>; + clock-names = "oscclk", "dout_mfcmscl_mfc", + "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc", + "dout_mfcmscl_jpeg"; + }; + cmu_dpu: clock-controller@13000000 { compatible = "samsung,exynos850-cmu-dpu"; reg = <0x13000000 0x8000>; @@ -308,6 +323,29 @@ "dout_hsi_mmc_card", "dout_hsi_usb20drd"; }; + cmu_is: clock-controller@14500000 { + compatible = "samsung,exynos850-cmu-is"; + reg = <0x14500000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_IS_BUS>, + <&cmu_top CLK_DOUT_IS_ITP>, + <&cmu_top CLK_DOUT_IS_VRA>, + <&cmu_top CLK_DOUT_IS_GDC>; + clock-names = "oscclk", "dout_is_bus", "dout_is_itp", + "dout_is_vra", "dout_is_gdc"; + }; + + cmu_aud: clock-controller@14a00000 { + compatible = "samsung,exynos850-cmu-aud"; + reg = <0x14a00000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>; + clock-names = "oscclk", "dout_aud"; + }; + pinctrl_alive: pinctrl@11850000 { compatible = "samsung,exynos850-pinctrl"; reg = <0x11850000 0x1000>; -- cgit From 09a122384e34a4aa7ebae59c1eb11d69cd80658c Mon Sep 17 00:00:00 2001 From: Sam Protsenko Date: Tue, 9 Aug 2022 14:33:23 +0300 Subject: arm64: dts: exynos: Add SysMMU nodes for Exynos850 Add all SysMMU nodes to Exynos850 SoC device tree. Signed-off-by: Sam Protsenko Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220809113323.29965-10-semen.protsenko@linaro.org --- arch/arm64/boot/dts/exynos/exynos850.dtsi | 45 +++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index 8e78b50416d8..c61441f3a89a 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -503,6 +503,51 @@ status = "disabled"; }; + sysmmu_mfcmscl: sysmmu@12c50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12c50000 0x9000>; + interrupts = ; + clock-names = "sysmmu"; + clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_dpu: sysmmu@130c0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x130c0000 0x9000>; + interrupts = ; + clock-names = "sysmmu"; + clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_is0: sysmmu@14550000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14550000 0x9000>; + interrupts = ; + clock-names = "sysmmu"; + clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_is1: sysmmu@14570000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14570000 0x9000>; + interrupts = ; + clock-names = "sysmmu"; + clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>; + #iommu-cells = <0>; + }; + + sysmmu_aud: sysmmu@14850000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14850000 0x9000>; + interrupts = ; + clock-names = "sysmmu"; + clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>; + #iommu-cells = <0>; + }; + sysreg_peri: syscon@10020000 { compatible = "samsung,exynos850-sysreg", "syscon"; reg = <0x10020000 0x10000>; -- cgit From db7ad41538439a3dcfebd738959c7526b4e7d528 Mon Sep 17 00:00:00 2001 From: Nicolas Frattaroli Date: Thu, 21 Jul 2022 10:33:00 +0200 Subject: arm64: dts: rockchip: Add analog audio output on quartz64-b This adds the necessary device tree changes to enable analog audio output on the PINE64 Quartz64 Model B with its RK809 codec. The headphone detection pin is left out for now because I couldn't get it to work and am not sure if it even matters, but for future reference: It's pin GPIO4 RK_PC4, named HP_DET_L_GPIO4_C4 in the schematic. Signed-off-by: Nicolas Frattaroli Link: https://lore.kernel.org/r/20220721083301.3711-1-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 32 +++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 02d5f5a8ca03..3897980d69d1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -42,6 +42,21 @@ }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + sdio_pwrseq: sdio-pwrseq { status = "okay"; compatible = "mmc-pwrseq-simple"; @@ -177,11 +192,16 @@ reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = ; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; rockchip,system-power-controller; + #sound-dai-cells = <0>; wakeup-source; #clock-cells = <1>; @@ -420,6 +440,16 @@ status = "disabled"; }; +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; -- cgit From 60a2fb8d202a4d98a87a6ff1aef87c9a07b4d2f4 Mon Sep 17 00:00:00 2001 From: Moudy Ho Date: Tue, 23 Aug 2022 10:38:02 +0800 Subject: arm64: dts: mt8183: add MediaTek MDP3 nodes Add device nodes for Media Data Path 3 (MDP3) modules. Signed-off-by: Moudy Ho Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220823023803.27850-4-moudy.ho@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 ++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 9d32871973a2..1543876b1e3c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1691,6 +1691,60 @@ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; + mdp3-rdma0@14001000 { + compatible = "mediatek,mt8183-mdp3-rdma"; + reg = <0 0x14001000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = , + ; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>, + <&gce 21 CMDQ_THR_PRIO_LOWEST 0>; + }; + + mdp3-rsz0@14003000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14003000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>; + mediatek,gce-events = , + ; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + }; + + mdp3-rsz1@14004000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14004000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>; + mediatek,gce-events = , + ; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + }; + + mdp3-wrot0@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14005000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + mediatek,gce-events = , + ; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + }; + + mdp3-wdma@14006000 { + compatible = "mediatek,mt8183-mdp3-wdma"; + reg = <0 0x14006000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = , + ; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WDMA0>; + iommus = <&iommu M4U_PORT_MDP_WDMA0>; + }; + ovl0: ovl@14008000 { compatible = "mediatek,mt8183-disp-ovl"; reg = <0 0x14008000 0 0x1000>; @@ -1834,6 +1888,15 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; }; + mdp3-ccorr@1401c000 { + compatible = "mediatek,mt8183-mdp3-ccorr"; + reg = <0 0x1401c000 0 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>; + mediatek,gce-events = , + ; + clocks = <&mmsys CLK_MM_MDP_CCORR>; + }; + imgsys: syscon@15020000 { compatible = "mediatek,mt8183-imgsys", "syscon"; reg = <0 0x15020000 0 0x1000>; -- cgit From a8013418d35cc760d0af3bec6deba885af97fc87 Mon Sep 17 00:00:00 2001 From: Fabien Parent Date: Tue, 26 Jul 2022 14:56:11 +0200 Subject: arm64: dts: mediatek: mt8183: add keyboard node MT8183 has an on-SoC keyboard controller commonly used for volume up/down buttons. List it in the SoC dts so that boards can enable/use it. Signed-off-by: Fabien Parent Signed-off-by: Mattijs Korpershoek Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220720-mt8183-keypad-v2-6-6d42c357cb76@baylibre.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 1543876b1e3c..71589489b306 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -943,6 +943,15 @@ clock-names = "spi", "wrap"; }; + keyboard: keyboard@10010000 { + compatible = "mediatek,mt6779-keypad"; + reg = <0 0x10010000 0 0x1000>; + interrupts = ; + clocks = <&clk26m>; + clock-names = "kpd"; + status = "disabled"; + }; + scp: scp@10500000 { compatible = "mediatek,mt8183-scp"; reg = <0 0x10500000 0 0x80000>, -- cgit From 09c332027d87cfda9ff58bb84952f6ffefbd309e Mon Sep 17 00:00:00 2001 From: Fabien Parent Date: Tue, 26 Jul 2022 14:56:12 +0200 Subject: arm64: dts: mediatek: mt8183-pumpkin: add keypad support Add device-tree bindings for the keypad driver on the MT8183 Pumpkin board. The MT8183 Pumpkin board has 2 buttons connected using: KPROW0, KPROW1 and KPCOL0. Signed-off-by: Fabien Parent Signed-off-by: Mattijs Korpershoek Link: https://lore.kernel.org/r/20220720-mt8183-keypad-v2-7-6d42c357cb76@baylibre.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index 530e0c9ce0c9..a1d01639df30 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -7,6 +7,7 @@ /dts-v1/; #include +#include #include "mt8183.dtsi" #include "mt6358.dtsi" @@ -122,6 +123,18 @@ clock-frequency = <100000>; }; +&keyboard { + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + status = "okay"; + linux,keymap = ; + keypad,num-rows = <2>; + keypad,num-columns = <1>; + debounce-delay-ms = <32>; + mediatek,keys-per-group = <2>; +}; + &mmc0 { status = "okay"; pinctrl-names = "default", "state_uhs"; @@ -226,6 +239,14 @@ }; }; + keyboard_pins: keyboard { + pins_keyboard { + pinmux = , + , + ; + }; + }; + mmc0_pins_default: mmc0-pins-default { pins_cmd_dat { pinmux = , -- cgit From d3dfd468857479a13285929f96132ae394f76f0a Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:00 +0800 Subject: arm64: dts: mediatek: Update mt81xx scpsys node to align with dt-bindings Update scpsys nodes using simple-mfd in mt81xx SoC devicetree to align with the bindings. Add specific compatibles for syscon node, even it's a dummy compatible, because syscon node must come with a specific compatible. Remove the '#power-domain-cells" propertry since the simple-mfd node is not the power domain provider; the provider is the child node. Signed-off-by: Tinghan Shen Link: https://lore.kernel.org/r/20220811025813.21492-8-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8167.dtsi | 3 +-- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 3 +-- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 3 +-- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 3 +-- 4 files changed, 4 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index 54655f2feb04..fbe1a1128cc6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -36,9 +36,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8167-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; spm: power-controller { compatible = "mediatek,mt8167-power-controller"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 6d9513c1f5bf..b4d48f8b7eeb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -444,9 +444,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 71589489b306..a70b669c49ba 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -761,9 +761,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8183-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index cbae5a5ee4a0..8cd5906fe3a8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -306,9 +306,8 @@ }; scpsys: syscon@10006000 { - compatible = "syscon", "simple-mfd"; + compatible = "mediatek,mt8192-scpsys", "syscon", "simple-mfd"; reg = <0 0x10006000 0 0x1000>; - #power-domain-cells = <1>; /* System Power Manager */ spm: power-controller { -- cgit From a376a9a6491431587992e3d4319466d9adba1b58 Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:01 +0800 Subject: arm64: dts: mt8195: Disable watchdog external reset signal Disable the external output reset signal of watchdog reset to avoid losing the reset reason stored in the watchdog registers. Signed-off-by: Fengquan Chen Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-9-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 066c14989708..436687ba826f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -327,6 +327,7 @@ watchdog: watchdog@10007000 { compatible = "mediatek,mt8195-wdt", "mediatek,mt6589-wdt"; + mediatek,disable-extrst; reg = <0 0x10007000 0 0x100>; }; -- cgit From a93f071a753a2f3fb7ff0acff588ade7679c92aa Mon Sep 17 00:00:00 2001 From: Tzung-Bi Shih Date: Thu, 11 Aug 2022 10:58:02 +0800 Subject: arm64: dts: mt8195: Disable I2C0 node The I2C0 node should not be enabled globally, as usage is board dependent; disable it in dtsi. Signed-off-by: Tzung-Bi Shih Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-10-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 436687ba826f..8032b839dfe8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -829,7 +829,7 @@ clock-names = "main", "dma"; #address-cells = <1>; #size-cells = <0>; - status = "okay"; + status = "disabled"; }; i2c1: i2c@11e01000 { -- cgit From e39e72cffea3288d3b1f27e0e05ce6c2d18b8735 Mon Sep 17 00:00:00 2001 From: YT Lee Date: Thu, 11 Aug 2022 10:58:03 +0800 Subject: arm64: dts: mt8195: Add cpufreq node Add cpufreq node for mt8195. Signed-off-by: YT Lee Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-11-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 8032b839dfe8..900aaa16f862 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -26,6 +26,7 @@ compatible = "arm,cortex-a55"; reg = <0x000>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -38,6 +39,7 @@ compatible = "arm,cortex-a55"; reg = <0x100>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -50,6 +52,7 @@ compatible = "arm,cortex-a55"; reg = <0x200>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -62,6 +65,7 @@ compatible = "arm,cortex-a55"; reg = <0x300>; enable-method = "psci"; + performance-domains = <&performance 0>; clock-frequency = <1701000000>; capacity-dmips-mhz = <578>; cpu-idle-states = <&cpu_off_l &cluster_off_l>; @@ -74,6 +78,7 @@ compatible = "arm,cortex-a78"; reg = <0x400>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -86,6 +91,7 @@ compatible = "arm,cortex-a78"; reg = <0x500>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -98,6 +104,7 @@ compatible = "arm,cortex-a78"; reg = <0x600>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -110,6 +117,7 @@ compatible = "arm,cortex-a78"; reg = <0x700>; enable-method = "psci"; + performance-domains = <&performance 1>; clock-frequency = <2171000000>; capacity-dmips-mhz = <1024>; cpu-idle-states = <&cpu_off_b &cluster_off_b>; @@ -231,6 +239,12 @@ clock-output-names = "clk32k"; }; + performance: performance-controller@11bc10 { + compatible = "mediatek,cpufreq-hw"; + reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>; + #performance-domain-cells = <1>; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupt-parent = <&gic>; -- cgit From 6aa5b46d1755a2e3db86fa6bd3f3d15d3c012594 Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:04 +0800 Subject: arm64: dts: mt8195: Add vdosys and vppsys clock nodes Add display clock nodes. Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-12-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 900aaa16f862..8d59a7da3271 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -983,6 +983,12 @@ #clock-cells = <1>; }; + vppsys0: clock-controller@14000000 { + compatible = "mediatek,mt8195-vppsys0"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + wpesys: clock-controller@14e00000 { compatible = "mediatek,mt8195-wpesys"; reg = <0 0x14e00000 0 0x1000>; @@ -1001,6 +1007,12 @@ #clock-cells = <1>; }; + vppsys1: clock-controller@14f00000 { + compatible = "mediatek,mt8195-vppsys1"; + reg = <0 0x14f00000 0 0x1000>; + #clock-cells = <1>; + }; + imgsys: clock-controller@15000000 { compatible = "mediatek,mt8195-imgsys"; reg = <0 0x15000000 0 0x1000>; @@ -1108,5 +1120,17 @@ reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; }; + + vdosys0: syscon@1c01a000 { + compatible = "mediatek,mt8195-mmsys", "syscon"; + reg = <0 0x1c01a000 0 0x1000>; + #clock-cells = <1>; + }; + + vdosys1: syscon@1c100000 { + compatible = "mediatek,mt8195-mmsys", "syscon"; + reg = <0 0x1c100000 0 0x1000>; + #clock-cells = <1>; + }; }; }; -- cgit From 2b515194bf0cb8f380586e96d2530a51b1878e6a Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:05 +0800 Subject: arm64: dts: mt8195: Add power domains controller Add power domains controller node for mt8195. Signed-off-by: Weiyi Lu Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-13-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 326 +++++++++++++++++++++++++++++++ 1 file changed, 326 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 8d59a7da3271..7e77aecb1296 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include / { compatible = "mediatek,mt8195"; @@ -338,6 +339,331 @@ #interrupt-cells = <2>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8195-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domain of the SoC */ + mfg0: power-domain@MT8195_POWER_DOMAIN_MFG0 { + reg = ; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_MFG1 { + reg = ; + clocks = <&apmixedsys CLK_APMIXED_MFGPLL>; + clock-names = "mfg"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_MFG2 { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG3 { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG4 { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG5 { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_MFG6 { + reg = ; + #power-domain-cells = <0>; + }; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_VPPSYS0 { + reg = ; + clocks = <&topckgen CLK_TOP_VPP>, + <&topckgen CLK_TOP_CAM>, + <&topckgen CLK_TOP_CCU>, + <&topckgen CLK_TOP_IMG>, + <&topckgen CLK_TOP_VENC>, + <&topckgen CLK_TOP_VDEC>, + <&topckgen CLK_TOP_WPE_VPP>, + <&topckgen CLK_TOP_CFG_VPP0>, + <&vppsys0 CLK_VPP0_SMI_COMMON>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>, + <&vppsys0 CLK_VPP0_GALS_VENCSYS>, + <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1>, + <&vppsys0 CLK_VPP0_GALS_INFRA>, + <&vppsys0 CLK_VPP0_GALS_CAMSYS>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>, + <&vppsys0 CLK_VPP0_SMI_REORDER>, + <&vppsys0 CLK_VPP0_SMI_IOMMU>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>, + <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>, + <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>, + <&vppsys0 CLK_VPP0_SMI_RSI>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "vppsys", "vppsys1", "vppsys2", "vppsys3", + "vppsys4", "vppsys5", "vppsys6", "vppsys7", + "vppsys0-0", "vppsys0-1", "vppsys0-2", "vppsys0-3", + "vppsys0-4", "vppsys0-5", "vppsys0-6", "vppsys0-7", + "vppsys0-8", "vppsys0-9", "vppsys0-10", "vppsys0-11", + "vppsys0-12", "vppsys0-13", "vppsys0-14", + "vppsys0-15", "vppsys0-16", "vppsys0-17", + "vppsys0-18"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_VDEC1 { + reg = ; + clocks = <&vdecsys CLK_VDEC_LARB1>; + clock-names = "vdec1-0"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 { + reg = ; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDOSYS0 { + reg = ; + clocks = <&topckgen CLK_TOP_CFG_VDO0>, + <&vdosys0 CLK_VDO0_SMI_GALS>, + <&vdosys0 CLK_VDO0_SMI_COMMON>, + <&vdosys0 CLK_VDO0_SMI_EMI>, + <&vdosys0 CLK_VDO0_SMI_IOMMU>, + <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vdosys0 CLK_VDO0_SMI_RSI>; + clock-names = "vdosys0", "vdosys0-0", "vdosys0-1", + "vdosys0-2", "vdosys0-3", + "vdosys0-4", "vdosys0-5"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_VPPSYS1 { + reg = ; + clocks = <&topckgen CLK_TOP_CFG_VPP1>, + <&vppsys1 CLK_VPP1_VPPSYS1_GALS>, + <&vppsys1 CLK_VPP1_VPPSYS1_LARB>; + clock-names = "vppsys1", "vppsys1-0", + "vppsys1-1"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_WPESYS { + reg = ; + clocks = <&wpesys CLK_WPE_SMI_LARB7>, + <&wpesys CLK_WPE_SMI_LARB8>, + <&wpesys CLK_WPE_SMI_LARB7_P>, + <&wpesys CLK_WPE_SMI_LARB8_P>; + clock-names = "wepsys-0", "wepsys-1", "wepsys-2", + "wepsys-3"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDEC0 { + reg = ; + clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "vdec0-0"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDEC2 { + reg = ; + clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>; + clock-names = "vdec2-0"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VENC { + reg = ; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_VDOSYS1 { + reg = ; + clocks = <&topckgen CLK_TOP_CFG_VDO1>, + <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_SMI_LARB3>, + <&vdosys1 CLK_VDO1_GALS>; + clock-names = "vdosys1", "vdosys1-0", + "vdosys1-1", "vdosys1-2"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_DP_TX { + reg = ; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_EPD_TX { + reg = ; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_HDMI_TX { + reg = ; + clocks = <&topckgen CLK_TOP_HDMI_APB>; + clock-names = "hdmi_tx"; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_IMG { + reg = ; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "img-0", "img-1"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_DIP { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_IPE { + reg = ; + clocks = <&topckgen CLK_TOP_IPE>, + <&imgsys CLK_IMG_IPE>, + <&ipesys CLK_IPE_SMI_LARB12>; + clock-names = "ipe", "ipe-0", "ipe-1"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_CAM { + reg = ; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_CAM2MM0_GALS>, + <&camsys CLK_CAM_CAM2MM1_GALS>, + <&camsys CLK_CAM_CAM2SYS_GALS>; + clock-names = "cam-0", "cam-1", "cam-2", "cam-3", + "cam-4"; + mediatek,infracfg = <&infracfg_ao>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_CAM_RAWA { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_CAM_RAWB { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_CAM_MRAW { + reg = ; + #power-domain-cells = <0>; + }; + }; + }; + }; + + power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P0 { + reg = ; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P1 { + reg = ; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_PCIE_PHY { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY { + reg = ; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_CSI_RX_TOP { + reg = ; + clocks = <&topckgen CLK_TOP_SENINF>, + <&topckgen CLK_TOP_SENINF2>; + clock-names = "csi_rx_top", "csi_rx_top1"; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_ETHER { + reg = ; + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>; + clock-names = "ether"; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_ADSP { + reg = ; + clocks = <&topckgen CLK_TOP_ADSP>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>; + clock-names = "adsp", "adsp1"; + #address-cells = <1>; + #size-cells = <0>; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <1>; + + power-domain@MT8195_POWER_DOMAIN_AUDIO { + reg = ; + clocks = <&topckgen CLK_TOP_A1SYS_HP>, + <&topckgen CLK_TOP_AUD_INTBUS>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>; + clock-names = "audio", "audio1", "audio2", + "audio3"; + mediatek,infracfg = <&infracfg_ao>; + #power-domain-cells = <0>; + }; + }; + }; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt8195-wdt", "mediatek,mt6589-wdt"; -- cgit From 385e0eedb7ab8069894c59455892dd916acb4456 Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:06 +0800 Subject: arm64: dts: mt8195: Add spmi node Add spmi node to mt8195. Signed-off-by: Henry Chen Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-14-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 7e77aecb1296..da2d976ff844 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -697,6 +697,21 @@ assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; }; + spmi: spmi@10027000 { + compatible = "mediatek,mt8195-spmi"; + reg = <0 0x10027000 0 0x000e00>, + <0 0x10029000 0 0x000100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_M_MST>; + clock-names = "pmif_sys_ck", + "pmif_tmr_ck", + "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>; + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8195-scp_adsp"; reg = <0 0x10720000 0 0x1000>; -- cgit From 867477a5d39fc614151f77bf036c50a29d5ead7f Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:07 +0800 Subject: arm64: dts: mt8195: Add scp node Add scp node for mt8195. Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-15-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index da2d976ff844..d10db01a360a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -712,6 +712,16 @@ assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; }; + scp: scp@10500000 { + compatible = "mediatek,mt8195-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>, + <0 0x10700000 0 0x8000>; + reg-names = "sram", "cfg", "l1tcm"; + interrupts = ; + status = "disabled"; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8195-scp_adsp"; reg = <0 0x10720000 0 0x1000>; -- cgit From 8903821c8ef9fe89ef20401f2261d2cfcdb0c386 Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:08 +0800 Subject: arm64: dts: mt8195: Add audio related nodes Add audio related nodes for mt8195. Signed-off-by: Trevor Wu Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-16-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 58 ++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index d10db01a360a..bbea0acff3d2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -226,6 +226,17 @@ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + }; + + sound: mt8195-sound { + mediatek,platform = <&afe>; + status = "disabled"; + }; + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -728,6 +739,53 @@ #clock-cells = <1>; }; + afe: mt8195-afe-pcm@10890000 { + compatible = "mediatek,mt8195-audio"; + reg = <0 0x10890000 0 0x10000>; + mediatek,topckgen = <&topckgen>; + power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>; + interrupts = ; + clocks = <&clk26m>, + <&apmixedsys CLK_APMIXED_APLL1>, + <&apmixedsys CLK_APMIXED_APLL2>, + <&topckgen CLK_TOP_APLL12_DIV0>, + <&topckgen CLK_TOP_APLL12_DIV1>, + <&topckgen CLK_TOP_APLL12_DIV2>, + <&topckgen CLK_TOP_APLL12_DIV3>, + <&topckgen CLK_TOP_APLL12_DIV9>, + <&topckgen CLK_TOP_A1SYS_HP>, + <&topckgen CLK_TOP_AUD_INTBUS>, + <&topckgen CLK_TOP_AUDIO_H>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&topckgen CLK_TOP_DPTX_MCK>, + <&topckgen CLK_TOP_I2SO1_MCK>, + <&topckgen CLK_TOP_I2SO2_MCK>, + <&topckgen CLK_TOP_I2SI1_MCK>, + <&topckgen CLK_TOP_I2SI2_MCK>, + <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>, + <&scp_adsp CLK_SCP_ADSP_AUDIODSP>; + clock-names = "clk26m", + "apll1_ck", + "apll2_ck", + "apll12_div0", + "apll12_div1", + "apll12_div2", + "apll12_div3", + "apll12_div9", + "a1sys_hp_sel", + "aud_intbus_sel", + "audio_h_sel", + "audio_local_bus_sel", + "dptx_m_sel", + "i2so1_m_sel", + "i2so2_m_sel", + "i2si1_m_sel", + "i2si2_m_sel", + "infra_ao_audio_26m_b", + "scp_adsp_audiodsp"; + status = "disabled"; + }; + uart0: serial@11001100 { compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart"; -- cgit From 7dd5bc578974a96025cb120012706bb4bf4e41fc Mon Sep 17 00:00:00 2001 From: YC Hung Date: Thu, 11 Aug 2022 10:58:09 +0800 Subject: arm64: dts: mt8195: Add adsp node and adsp mailbox nodes Add adsp node and adsp mailbox nodes for mt8195. Signed-off-by: YC Hung Signed-off-by: Allen-KH Cheng Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-17-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 37 ++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index bbea0acff3d2..f42d33414125 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -739,6 +739,43 @@ #clock-cells = <1>; }; + adsp: dsp@10803000 { + compatible = "mediatek,mt8195-dsp"; + reg = <0 0x10803000 0 0x1000>, + <0 0x10840000 0 0x40000>; + reg-names = "cfg", "sram"; + clocks = <&topckgen CLK_TOP_ADSP>, + <&clk26m>, + <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>, + <&topckgen CLK_TOP_MAINPLL_D7_D2>, + <&scp_adsp CLK_SCP_ADSP_AUDIODSP>, + <&topckgen CLK_TOP_AUDIO_H>; + clock-names = "adsp_sel", + "clk26m_ck", + "audio_local_bus", + "mainpll_d7_d2", + "scp_adsp_audiodsp", + "audio_h"; + power-domains = <&spm MT8195_POWER_DOMAIN_ADSP>; + mbox-names = "rx", "tx"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + status = "disabled"; + }; + + adsp_mailbox0: mailbox@10816000 { + compatible = "mediatek,mt8195-adsp-mbox"; + #mbox-cells = <0>; + reg = <0 0x10816000 0 0x1000>; + interrupts = ; + }; + + adsp_mailbox1: mailbox@10817000 { + compatible = "mediatek,mt8195-adsp-mbox"; + #mbox-cells = <0>; + reg = <0 0x10817000 0 0x1000>; + interrupts = ; + }; + afe: mt8195-afe-pcm@10890000 { compatible = "mediatek,mt8195-audio"; reg = <0 0x10890000 0 0x10000>; -- cgit From 04cd978316c992711f341b0c91fdb44f2c21836b Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Thu, 11 Aug 2022 10:58:10 +0800 Subject: arm64: dts: mt8195: Specify audio reset controller Specify audio reset controller for audio hardware resetting. Signed-off-by: Trevor Wu Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-18-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index f42d33414125..9c14c42f0713 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -680,6 +680,7 @@ "mediatek,mt6589-wdt"; mediatek,disable-extrst; reg = <0 0x10007000 0 0x100>; + #reset-cells = <1>; }; apmixedsys: syscon@1000c000 { @@ -782,6 +783,8 @@ mediatek,topckgen = <&topckgen>; power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>; interrupts = ; + resets = <&watchdog 14>; + reset-names = "audiosys"; clocks = <&clk26m>, <&apmixedsys CLK_APMIXED_APLL1>, <&apmixedsys CLK_APMIXED_APLL2>, -- cgit From 3b5838d1d82e381e31bc3d13398f08d69b98be5d Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Thu, 11 Aug 2022 10:58:11 +0800 Subject: arm64: dts: mt8195: Add iommu and smi nodes Add iommu nodes and smi nodes for mt8195. Signed-off-by: Yong Wu Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-19-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 449 +++++++++++++++++++++++++++++++ 1 file changed, 449 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 9c14c42f0713..f1f52af3823a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -724,6 +725,17 @@ assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; }; + iommu_infra: infra-iommu@10315000 { + compatible = "mediatek,mt8195-iommu-infra"; + reg = <0 0x10315000 0 0x5000>; + interrupts = , + , + , + , + ; + #iommu-cells = <1>; + }; + scp: scp@10500000 { compatible = "mediatek,mt8195-scp"; reg = <0 0x10500000 0 0x100000>, @@ -1438,6 +1450,64 @@ #clock-cells = <1>; }; + smi_sub_common_vpp0_vpp1_2x1: smi@14010000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x14010000 0 0x1000>; + clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + smi_sub_common_vdec_vpp0_2x1: smi@14011000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x14011000 0 0x1000>; + clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + smi_common_vpp: smi@14012000 { + compatible = "mediatek,mt8195-smi-common-vpp"; + reg = <0 0x14012000 0 0x1000>; + clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>, + <&vppsys0 CLK_VPP0_SMI_RSI>, + <&vppsys0 CLK_VPP0_SMI_RSI>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + larb4: larb@14013000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14013000 0 0x1000>; + mediatek,larb-id = <4>; + mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>; + clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>, + <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + iommu_vpp: iommu@14018000 { + compatible = "mediatek,mt8195-iommu-vpp"; + reg = <0 0x14018000 0 0x1000>; + mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb8 + &larb12 &larb14 &larb16 &larb18 + &larb20 &larb22 &larb23 &larb26 + &larb27>; + interrupts = ; + clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>; + clock-names = "bclk"; + #iommu-cells = <1>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + wpesys: clock-controller@14e00000 { compatible = "mediatek,mt8195-wpesys"; reg = <0 0x14e00000 0 0x1000>; @@ -1456,24 +1526,116 @@ #clock-cells = <1>; }; + larb7: larb@14e04000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14e04000 0 0x1000>; + mediatek,larb-id = <7>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&wpesys CLK_WPE_SMI_LARB7>, + <&wpesys CLK_WPE_SMI_LARB7>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>; + }; + + larb8: larb@14e05000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14e05000 0 0x1000>; + mediatek,larb-id = <8>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&wpesys CLK_WPE_SMI_LARB8>, + <&wpesys CLK_WPE_SMI_LARB8>, + <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>; + }; + vppsys1: clock-controller@14f00000 { compatible = "mediatek,mt8195-vppsys1"; reg = <0 0x14f00000 0 0x1000>; #clock-cells = <1>; }; + larb5: larb@14f02000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14f02000 0 0x1000>; + mediatek,larb-id = <5>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>, + <&vppsys1 CLK_VPP1_VPPSYS1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + larb6: larb@14f03000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x14f03000 0 0x1000>; + mediatek,larb-id = <6>; + mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>; + clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>, + <&vppsys1 CLK_VPP1_VPPSYS1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + imgsys: clock-controller@15000000 { compatible = "mediatek,mt8195-imgsys"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; }; + larb9: larb@15001000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,larb-id = <9>; + mediatek,smi = <&smi_sub_common_img1_3x1>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_IMG>; + }; + + smi_sub_common_img0_3x1: smi@15002000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x15002000 0 0x1000>; + clocks = <&imgsys CLK_IMG_IPE>, + <&imgsys CLK_IMG_IPE>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_IMG>; + }; + + smi_sub_common_img1_3x1: smi@15003000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x15003000 0 0x1000>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_GALS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vdo>; + power-domains = <&spm MT8195_POWER_DOMAIN_IMG>; + }; + imgsys1_dip_top: clock-controller@15110000 { compatible = "mediatek,mt8195-imgsys1_dip_top"; reg = <0 0x15110000 0 0x1000>; #clock-cells = <1>; }; + larb10: larb@15120000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15120000 0 0x1000>; + mediatek,larb-id = <10>; + mediatek,smi = <&smi_sub_common_img1_3x1>; + clocks = <&imgsys CLK_IMG_DIP0>, + <&imgsys1_dip_top CLK_IMG1_DIP_TOP_LARB10>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_DIP>; + }; + imgsys1_dip_nr: clock-controller@15130000 { compatible = "mediatek,mt8195-imgsys1_dip_nr"; reg = <0 0x15130000 0 0x1000>; @@ -1486,18 +1648,129 @@ #clock-cells = <1>; }; + larb11: larb@15230000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15230000 0 0x1000>; + mediatek,larb-id = <11>; + mediatek,smi = <&smi_sub_common_img1_3x1>; + clocks = <&imgsys CLK_IMG_WPE0>, + <&imgsys1_wpe CLK_IMG1_WPE_LARB11>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_DIP>; + }; + ipesys: clock-controller@15330000 { compatible = "mediatek,mt8195-ipesys"; reg = <0 0x15330000 0 0x1000>; #clock-cells = <1>; }; + larb12: larb@15340000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x15340000 0 0x1000>; + mediatek,larb-id = <12>; + mediatek,smi = <&smi_sub_common_img0_3x1>; + clocks = <&ipesys CLK_IPE_SMI_LARB12>, + <&ipesys CLK_IPE_SMI_LARB12>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_IPE>; + }; + camsys: clock-controller@16000000 { compatible = "mediatek,mt8195-camsys"; reg = <0 0x16000000 0 0x1000>; #clock-cells = <1>; }; + larb13: larb@16001000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16001000 0 0x1000>; + mediatek,larb-id = <13>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_CAM2MM0_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + larb14: larb@16002000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16002000 0 0x1000>; + mediatek,larb-id = <14>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_LARB14>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + smi_sub_common_cam_4x1: smi@16004000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x16004000 0 0x1000>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_LARB13>, + <&camsys CLK_CAM_CAM2MM0_GALS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vdo>; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + smi_sub_common_cam_7x1: smi@16005000 { + compatible = "mediatek,mt8195-smi-sub-common"; + reg = <0 0x16005000 0 0x1000>; + clocks = <&camsys CLK_CAM_LARB14>, + <&camsys CLK_CAM_CAM2MM1_GALS>, + <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>; + clock-names = "apb", "smi", "gals0"; + mediatek,smi = <&smi_common_vpp>; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + larb16: larb@16012000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16012000 0 0x1000>; + mediatek,larb-id = <16>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>, + <&camsys_rawa CLK_CAM_RAWA_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>; + }; + + larb17: larb@16013000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16013000 0 0x1000>; + mediatek,larb-id = <17>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys_yuva CLK_CAM_YUVA_LARBX>, + <&camsys_yuva CLK_CAM_YUVA_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>; + }; + + larb27: larb@16014000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16014000 0 0x1000>; + mediatek,larb-id = <27>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>, + <&camsys_rawb CLK_CAM_RAWB_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>; + }; + + larb28: larb@16015000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16015000 0 0x1000>; + mediatek,larb-id = <28>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys_yuvb CLK_CAM_YUVB_LARBX>, + <&camsys_yuvb CLK_CAM_YUVB_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>; + }; + camsys_rawa: clock-controller@1604f000 { compatible = "mediatek,mt8195-camsys_rawa"; reg = <0 0x1604f000 0 0x1000>; @@ -1528,24 +1801,103 @@ #clock-cells = <1>; }; + larb25: larb@16141000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16141000 0 0x1000>; + mediatek,larb-id = <25>; + mediatek,smi = <&smi_sub_common_cam_4x1>; + clocks = <&camsys CLK_CAM_LARB13>, + <&camsys_mraw CLK_CAM_MRAW_LARBX>, + <&camsys CLK_CAM_CAM2MM0_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>; + }; + + larb26: larb@16142000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x16142000 0 0x1000>; + mediatek,larb-id = <26>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&camsys_mraw CLK_CAM_MRAW_LARBX>, + <&camsys_mraw CLK_CAM_MRAW_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>; + + }; + ccusys: clock-controller@17200000 { compatible = "mediatek,mt8195-ccusys"; reg = <0 0x17200000 0 0x1000>; #clock-cells = <1>; }; + larb18: larb@17201000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x17201000 0 0x1000>; + mediatek,larb-id = <18>; + mediatek,smi = <&smi_sub_common_cam_7x1>; + clocks = <&ccusys CLK_CCU_LARB18>, + <&ccusys CLK_CCU_LARB18>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_CAM>; + }; + + larb24: larb@1800d000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1800d000 0 0x1000>; + mediatek,larb-id = <24>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + larb23: larb@1800e000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1800e000 0 0x1000>; + mediatek,larb-id = <23>; + mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>; + clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + vdecsys_soc: clock-controller@1800f000 { compatible = "mediatek,mt8195-vdecsys_soc"; reg = <0 0x1800f000 0 0x1000>; #clock-cells = <1>; }; + larb21: larb@1802e000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1802e000 0 0x1000>; + mediatek,larb-id = <21>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdecsys CLK_VDEC_LARB1>, + <&vdecsys CLK_VDEC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + vdecsys: clock-controller@1802f000 { compatible = "mediatek,mt8195-vdecsys"; reg = <0 0x1802f000 0 0x1000>; #clock-cells = <1>; }; + larb22: larb@1803e000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1803e000 0 0x1000>; + mediatek,larb-id = <22>; + mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>; + clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>, + <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>; + }; + vdecsys_core1: clock-controller@1803f000 { compatible = "mediatek,mt8195-vdecsys_core1"; reg = <0 0x1803f000 0 0x1000>; @@ -1564,6 +1916,17 @@ #clock-cells = <1>; }; + larb19: larb@1a010000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1a010000 0 0x1000>; + mediatek,larb-id = <19>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vencsys CLK_VENC_VENC>, + <&vencsys CLK_VENC_GALS>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC>; + }; + vencsys_core1: clock-controller@1b000000 { compatible = "mediatek,mt8195-vencsys_core1"; reg = <0 0x1b000000 0 0x1000>; @@ -1576,10 +1939,96 @@ #clock-cells = <1>; }; + larb20: larb@1b010000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1b010000 0 0x1000>; + mediatek,larb-id = <20>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>, + <&vencsys_core1 CLK_VENC_CORE1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + }; + + larb0: larb@1c018000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c018000 0 0x1000>; + mediatek,larb-id = <0>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + }; + + larb1: larb@1c019000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c019000 0 0x1000>; + mediatek,larb-id = <1>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&vdosys0 CLK_VDO0_SMI_LARB>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>, + <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + }; + vdosys1: syscon@1c100000 { compatible = "mediatek,mt8195-mmsys", "syscon"; reg = <0 0x1c100000 0 0x1000>; #clock-cells = <1>; }; + + smi_common_vdo: smi@1c01b000 { + compatible = "mediatek,mt8195-smi-common-vdo"; + reg = <0 0x1c01b000 0 0x1000>; + clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>, + <&vdosys0 CLK_VDO0_SMI_EMI>, + <&vdosys0 CLK_VDO0_SMI_RSI>, + <&vdosys0 CLK_VDO0_SMI_GALS>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + + }; + + iommu_vdo: iommu@1c01f000 { + compatible = "mediatek,mt8195-iommu-vdo"; + reg = <0 0x1c01f000 0 0x1000>; + mediatek,larbs = <&larb0 &larb2 &larb5 &larb7 &larb9 + &larb10 &larb11 &larb13 &larb17 + &larb19 &larb21 &larb24 &larb25 + &larb28>; + interrupts = ; + #iommu-cells = <1>; + clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>; + clock-names = "bclk"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + }; + + larb2: larb@1c102000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c102000 0 0x1000>; + mediatek,larb-id = <2>; + mediatek,smi = <&smi_common_vdo>; + clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_SMI_LARB2>, + <&vdosys1 CLK_VDO1_GALS>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + }; + + larb3: larb@1c103000 { + compatible = "mediatek,mt8195-smi-larb"; + reg = <0 0x1c103000 0 0x1000>; + mediatek,larb-id = <3>; + mediatek,smi = <&smi_common_vpp>; + clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>, + <&vdosys1 CLK_VDO1_GALS>, + <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; + clock-names = "apb", "smi", "gals"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + }; }; }; -- cgit From 329239a154bc735a74c33e33c5139b30949efc57 Mon Sep 17 00:00:00 2001 From: "Jason-JH.Lin" Date: Thu, 11 Aug 2022 10:58:12 +0800 Subject: arm64: dts: mt8195: Add gce node Add gce node and gce alias to mt8195 device tree. Signed-off-by: Jason-JH.Lin Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-20-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index f1f52af3823a..5ad7c4200178 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include #include #include @@ -19,6 +20,11 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gce0 = &gce0; + gce1 = &gce1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -736,6 +742,22 @@ #iommu-cells = <1>; }; + gce0: mailbox@10320000 { + compatible = "mediatek,mt8195-gce"; + reg = <0 0x10320000 0 0x4000>; + interrupts = ; + #mbox-cells = <2>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE>; + }; + + gce1: mailbox@10330000 { + compatible = "mediatek,mt8195-gce"; + reg = <0 0x10330000 0 0x4000>; + interrupts = ; + #mbox-cells = <2>; + clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>; + }; + scp: scp@10500000 { compatible = "mediatek,mt8195-scp"; reg = <0 0x10500000 0 0x100000>, -- cgit From b852ee68fd722294145d86bb4d383d4ad4ae270f Mon Sep 17 00:00:00 2001 From: "Jason-JH.Lin" Date: Thu, 11 Aug 2022 10:58:13 +0800 Subject: arm64: dts: mt8195: Add display node for vdosys0 Add display node for vdosys0 of mt8195. Signed-off-by: Jason-JH.Lin Signed-off-by: Tinghan Shen Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220811025813.21492-21-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 93 ++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 5ad7c4200178..a50ebb5d145f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1958,6 +1958,7 @@ vdosys0: syscon@1c01a000 { compatible = "mediatek,mt8195-mmsys", "syscon"; reg = <0 0x1c01a000 0 0x1000>; + mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; #clock-cells = <1>; }; @@ -1973,6 +1974,98 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; }; + ovl0: ovl@1c000000 { + compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl"; + reg = <0 0x1c000000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>; + iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>; + }; + + rdma0: rdma@1c002000 { + compatible = "mediatek,mt8195-disp-rdma"; + reg = <0 0x1c002000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>; + iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>; + }; + + color0: color@1c003000 { + compatible = "mediatek,mt8195-disp-color", "mediatek,mt8173-disp-color"; + reg = <0 0x1c003000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>; + }; + + ccorr0: ccorr@1c004000 { + compatible = "mediatek,mt8195-disp-ccorr", "mediatek,mt8192-disp-ccorr"; + reg = <0 0x1c004000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>; + }; + + aal0: aal@1c005000 { + compatible = "mediatek,mt8195-disp-aal", "mediatek,mt8183-disp-aal"; + reg = <0 0x1c005000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>; + }; + + gamma0: gamma@1c006000 { + compatible = "mediatek,mt8195-disp-gamma", "mediatek,mt8183-disp-gamma"; + reg = <0 0x1c006000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>; + }; + + dither0: dither@1c007000 { + compatible = "mediatek,mt8195-disp-dither", "mediatek,mt8183-disp-dither"; + reg = <0 0x1c007000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>; + }; + + dsc0: dsc@1c009000 { + compatible = "mediatek,mt8195-disp-dsc"; + reg = <0 0x1c009000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>; + }; + + merge0: merge@1c014000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c014000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>; + }; + + mutex: mutex@1c016000 { + compatible = "mediatek,mt8195-disp-mutex"; + reg = <0 0x1c016000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>; + mediatek,gce-events = ; + }; + larb0: larb@1c018000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1c018000 0 0x1000>; -- cgit From 61fb67dae505d71da5f17752b46aaacc3939c10f Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Sat, 15 Jan 2022 10:04:43 +0000 Subject: ARM: dts: gemini: ns2502: permit to use gigabit I believed that gigabit was not working due to some unknown missing GPIO. In fact, gigabit worked when REALTEK_PHY was compiled out. So the problem was due to PHY delay and we need to use rgmii-id. Signed-off-by: Corentin Labbe Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini-ns2502.dts | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts index 704abd212df5..508bb5846e29 100644 --- a/arch/arm/boot/dts/gemini-ns2502.dts +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -39,10 +39,6 @@ phy0: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; - /* We lack the knowledge of necessary GPIO to achieve - * Gigabit - */ - max-speed = <100>; }; }; }; @@ -50,7 +46,7 @@ ðernet { status = "okay"; ethernet-port@0 { - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; }; -- cgit From 95bef83078a4de295c1ae4690937623f2237b8ac Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Sat, 15 Jan 2022 10:04:44 +0000 Subject: ARM: dts: gemini: ssi1328: permit to use gigabit I believed that gigabit was not working due to unknown missing GPIO. But the problem was due to Marvell PHY incorrectly setting delay. Now it is fixed, gigabit works. Signed-off-by: Corentin Labbe Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini-ssi1328.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts index 2b3e7db84fed..42e85f07cf76 100644 --- a/arch/arm/boot/dts/gemini-ssi1328.dts +++ b/arch/arm/boot/dts/gemini-ssi1328.dts @@ -40,10 +40,6 @@ phy0: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; - /* We lack the knowledge of necessary GPIO to achieve - * Gigabit - */ - max-speed = <100>; }; /* WAN ICPlus IP101A */ phy1: ethernet-phy@2 { -- cgit From f485f6d852696d4cd9a2cc1c8e3dd8dba75a3e17 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Apr 2022 00:03:58 +0200 Subject: ARM: dts: Let Gemini NS2502 parse redboot partitions The NS2502 uses hardcoded partitions but parsing the RedBoot FIS should work fine, given that this flash seems to be using 0x200000 erase blocks. Cc: Corentin Labbe Link: https://lore.kernel.org/r/20220412220358.3674598-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini-ns2502.dts | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts index 508bb5846e29..e6eeb35e8819 100644 --- a/arch/arm/boot/dts/gemini-ns2502.dts +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -61,30 +61,9 @@ pinctrl-1 = <&pflash_disabled_pins>; partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00020000>; - }; - partition@20000 { - label = "kernel"; - reg = <0x00020000 0x00700000>; - }; - partition@720000 { - label = "VCTL"; - reg = <0x00720000 0x00020000>; - }; - partition@740000 { - label = "CurConf"; - reg = <0x00740000 0x000a0000>; - }; - partition@7e0000 { - label = "FIS"; - reg = <0x007e0000 0x00010000>; - }; + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; }; }; -- cgit From 54ac6794df9db684d367662a7ea84b7f41cf9312 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Fri, 19 Aug 2022 20:39:43 +0100 Subject: arm64: dts: renesas: r9a09g011: Add i2c nodes Add device nodes for the I2C controllers that are not assigned to the ISP. Signed-off-by: Phil Edworthy Link: https://lore.kernel.org/r/20220819193944.337599-3-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 44e1e288343c..fb1a97202c38 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -123,6 +123,34 @@ #power-domain-cells = <0>; }; + i2c0: i2c@a4030000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c"; + reg = <0 0xa4030000 0 0x80>; + interrupts = , + ; + interrupt-names = "tia", "tis"; + clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>; + resets = <&cpg R9A09G011_IIC_GPA_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@a4030100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c"; + reg = <0 0xa4030100 0 0x80>; + interrupts = , + ; + interrupt-names = "tia", "tis"; + clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK1>; + resets = <&cpg R9A09G011_IIC_GPB_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + uart0: serial@a4040000 { compatible = "renesas,r9a09g011-uart", "renesas,em-uart"; reg = <0 0xa4040000 0 0x80>; -- cgit From 39ffd3307fb85ec8a73a8b9d13b0ea923c48b72a Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Fri, 19 Aug 2022 20:39:44 +0100 Subject: arm64: dts: renesas: rzv2m evk: Enable i2c Signed-off-by: Phil Edworthy Link: https://lore.kernel.org/r/20220819193944.337599-4-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts | 27 +++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index c3a52fa0b16e..5c15d73d059f 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r9a09g011.dtsi" +#include / { model = "RZ/V2M Evaluation Kit 2.0"; @@ -53,6 +54,32 @@ clock-frequency = <48000000>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; +}; + +&pinctrl { + i2c0_pins: i2c0 { + pinmux = , /* SDA */ + ; /* SCL */ + }; + + i2c2_pins: i2c2 { + pinmux = , /* SDA */ + ; /* SCL */ + }; +}; + &uart0 { status = "okay"; }; -- cgit From 59c148535324e1fc61a0cad6d04559196dde5ed1 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 Aug 2022 09:10:17 +0200 Subject: arm64: dts: renesas: r8a779{51|60|65}: Put I2C aliases to board files I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220825071022.7864-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77951.dtsi | 11 ----------- arch/arm64/boot/dts/renesas/r8a77960.dtsi | 11 ----------- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 11 ----------- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 8 ++++++++ arch/arm64/boot/dts/renesas/ulcb.dtsi | 8 ++++++++ 5 files changed, 16 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index a297af22a195..07c8763c1e77 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -21,17 +21,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c_dvfs; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 4159c23d3874..1424d4ad941f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -16,17 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c_dvfs; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 21a5e1cdd9f1..997f29521f66 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -21,17 +21,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c_dvfs; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index b7c7911858b2..d97473401819 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -33,6 +33,14 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; serial0 = &scif2; serial1 = &hscif1; ethernet0 = &avb; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0772dfe4adff..29cedf4dc1a9 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -21,6 +21,14 @@ model = "Renesas R-Car Gen3 ULCB board"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; serial0 = &scif2; ethernet0 = &avb; mmc0 = &sdhi2; -- cgit From 8cc5dcfabab8cfe9dd5a4386b64f0562399e3139 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 Aug 2022 09:10:18 +0200 Subject: arm64: dts: renesas: r8a77970: Put I2C aliases to board files I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220825071022.7864-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 5 +++++ arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 5 +++++ arch/arm64/boot/dts/renesas/r8a77970.dtsi | 8 -------- 3 files changed, 10 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 49d1a929aef7..004a5eacd460 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -15,6 +15,11 @@ compatible = "renesas,eagle", "renesas,r8a77970"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; serial0 = &scif0; ethernet0 = &avb; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 39f3e6cbba3d..c2b65f8de547 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -15,6 +15,11 @@ compatible = "renesas,v3msk", "renesas,r8a77970"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; serial0 = &scif0; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 2703ef3a38c2..1df02facb796 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -16,14 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - }; - /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; -- cgit From efab8210e015f9078001099552058b3c38b123b0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 Aug 2022 09:10:19 +0200 Subject: arm64: dts: renesas: r8a77980: Put I2C aliases to board files I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220825071022.7864-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 6 ++++++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 6 ++++++ arch/arm64/boot/dts/renesas/r8a77980.dtsi | 9 --------- 3 files changed, 12 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 43ed033eb512..981cf4db0e54 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -15,6 +15,12 @@ compatible = "renesas,condor", "renesas,r8a77980"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; serial0 = &scif0; ethernet0 = &gether; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 1d09d8867651..d168b0e7747d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -15,6 +15,12 @@ compatible = "renesas,v3hsk", "renesas,r8a77980"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; serial0 = &scif0; ethernet0 = &gether; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 8594be72f221..a3af34191ca2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -16,15 +16,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - }; - /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; -- cgit From fb2a16097c3cc660788cddae96dc2c44cd4502b6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 Aug 2022 09:10:20 +0200 Subject: arm64: dts: renesas: r8a77990: Put I2C aliases to board files I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220825071022.7864-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/ebisu.dtsi | 8 ++++++++ arch/arm64/boot/dts/renesas/r8a77990.dtsi | 11 ----------- 2 files changed, 8 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 8fc03491a11c..bbc29452d1be 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -13,6 +13,14 @@ compatible = "renesas,ebisu"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; serial0 = &scif2; ethernet0 = &avb; mmc0 = &sdhi3; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 565e9d85946e..3053b4b21497 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -14,17 +14,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. -- cgit From 1d35135672c9c5e883eabb3b0288822cac79ac1f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 Aug 2022 09:10:21 +0200 Subject: arm64: dts: renesas: r8a779a0: Put I2C aliases to board files I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220825071022.7864-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 7 +++++++ arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 ---------- 2 files changed, 7 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 53c4a26198e3..99b73e21c82c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -16,6 +16,13 @@ compatible = "renesas,falcon-cpu", "renesas,r8a779a0"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; serial0 = &scif0; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 3d668709d8a8..3e1557a5b5e1 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -14,16 +14,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - }; - /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; -- cgit From 8d580c0f5371d2fef2ad6cb57325356cb0f5a626 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Aug 2022 16:49:48 +0200 Subject: arm64: dts: renesas: r8a774e1: Rename i2c_dvfs to iic_pmic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As RZ/G2 SoCs do not support DVFS, the "iic-dvfs" module was renamed to "iic-pmic" in the RZ/G Series, 2nd Generation User’s Manual: Hardware Rev. 1.00. See also commit a636d8037ef6028a ("arm64: dts: renesas: rzg2: Rename i2c_dvfs to iic_pmic"), which apparently forgot to update RZ/G2H. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/7d60653d4d63904dc025a133297a53eb885fa064.1661525361.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 8ec59094882b..3cb3b2e052c1 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -769,7 +769,7 @@ status = "disabled"; }; - i2c_dvfs: i2c@e60b0000 { + iic_pmic: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a774e1", -- cgit From 13079557ec9775ce4208d3066c415a0ab7ca170e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 25 Aug 2022 09:10:22 +0200 Subject: arm64: dts: renesas: r8a774a1: Put I2C aliases to board files I2C aliases are not a property of a SoC. They belong to board files where they are named accordingly in the schematics. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220825071022.7864-7-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/hihope-common.dtsi | 8 ++++++++ arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts | 8 ++++++++ arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 11 ----------- 3 files changed, 16 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index b062f41ee270..83104af2813e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -10,6 +10,14 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; mmc0 = &sdhi3; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts index 3cf2e076940f..9ae67263c0df 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -14,6 +14,14 @@ compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; serial2 = &hscif1; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index e7d17776624d..aec62c93f9a3 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -17,17 +17,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &iic_pmic; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. -- cgit From 6b2592f087bb7e35fd0a6616bc92d87d9af63aab Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 27 Aug 2022 17:38:12 -0300 Subject: arm64: dts: meson-g12a: Remove 'enable-active-low' The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Signed-off-by: Fabio Estevam Reviewed-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220827203813.1742715-1-festevam@denx.de --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index b4e86196e346..b2bb94981838 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -111,7 +111,6 @@ vin-supply = <&dc_in>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; }; vddao_1v8: regulator-vddao_1v8 { -- cgit From fdfaefa831728110f591764c1dc274fb3739e5c1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 27 Aug 2022 17:38:13 -0300 Subject: arm64: dts: meson-sm1-sei610: Remove 'enable-active-low' The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Signed-off-by: Fabio Estevam Reviewed-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220827203813.1742715-2-festevam@denx.de --- arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 603337ca5608..9068a334ea57 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -171,7 +171,6 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; regulator-always-on; }; -- cgit From 2fd8bd005897436c5a6d2d150d7b1ae2907f8b06 Mon Sep 17 00:00:00 2001 From: Michael Riesch Date: Tue, 12 Jul 2022 15:32:02 +0200 Subject: arm64: dts: rockchip: add vcc_cam regulator to rock-3a The Radxa ROCK3 Model A features a voltage regulator that provides a 3V3 supply to the MIPI CSI connector. Add this regulator to the device tree of the board. Signed-off-by: Michael Riesch Link: https://lore.kernel.org/r/20220712133204.2524942-1-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index 6b5093a1a6cf..a848a2a2ab68 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -131,6 +131,22 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usb>; }; + + vcc_cam: vcc-cam { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_cam_en>; + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; }; &combphy0 { @@ -462,6 +478,12 @@ }; &pinctrl { + cam { + vcc_cam_en: vcc_cam_en { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ethernet { eth_phy_rst: eth_phy_rst { rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; -- cgit From 7a3eabdcd0fdc344d31b18e78e4f4b5d94db8df5 Mon Sep 17 00:00:00 2001 From: Michael Riesch Date: Tue, 12 Jul 2022 15:32:03 +0200 Subject: arm64: dts: rockchip: add vcc_mipi regulator to rock-3a The Radxa ROCK3 Model A features a voltage regulator that provides a 3V3 supply to the MIPI DSI connector. Add this regulator to the device tree of the board. Signed-off-by: Michael Riesch Link: https://lore.kernel.org/r/20220712133204.2524942-2-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index a848a2a2ab68..e883afa83617 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -147,6 +147,22 @@ regulator-off-in-suspend; }; }; + + vcc_mipi: vcc-mipi { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_mipi_en>; + regulator-name = "vcc_mipi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; }; &combphy0 { @@ -484,6 +500,12 @@ }; }; + display { + vcc_mipi_en: vcc_mipi_en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ethernet { eth_phy_rst: eth_phy_rst { rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; -- cgit From a233ea1e6268a779d5c8c427eb14a2a89f95f4f9 Mon Sep 17 00:00:00 2001 From: Michael Riesch Date: Tue, 12 Jul 2022 15:32:04 +0200 Subject: arm64: dts: rockchip: specify pinctrl for i2c adapters on rock-3a On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI connector and the M.2/NGFF connector use the non-default pins. Specify the correct pinctrl but leave the adapters disabled (as they are supposed to be activated by overlays that describe the external hardware). Signed-off-by: Michael Riesch Link: https://lore.kernel.org/r/20220712133204.2524942-3-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index e883afa83617..cd8cc0c3c68a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -472,6 +472,18 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "disabled"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; + status = "disabled"; +}; + &i2s0_8ch { status = "okay"; }; -- cgit From 8f40330773cd9dcf6de43b223f0d8b3ef10e26d2 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Thu, 25 Aug 2022 08:51:35 +0200 Subject: ARM: dts: lan966x: add support for pcb8290 Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a quad-port) on the external MDIO bus and no SFP ports. Signed-off-by: Horatiu Vultur Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/lan966x-pcb8290.dts | 175 ++++++++++++++++++++++++++++++++++ 2 files changed, 176 insertions(+) create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..595e870750cd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \ dtb-$(CONFIG_SOC_LAN966) += \ lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ lan966x-kontron-kswitch-d10-mmt-8g.dtb \ + lan966x-pcb8290.dtb \ lan966x-pcb8291.dtb \ lan966x-pcb8309.dtb dtb-$(CONFIG_SOC_LS1021A) += \ diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts new file mode 100644 index 000000000000..2e091180a64c --- /dev/null +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Horatiu Vultur + */ +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + model = "Microchip EVB LAN9668"; + compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966"; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&gpio { + miim_a_pins: mdio-pins { + /* MDC, MDIO */ + pins = "GPIO_28", "GPIO_29"; + function = "miim_a"; + }; + + pps_out_pins: pps-out-pins { + /* 1pps output */ + pins = "GPIO_38"; + function = "ptpsync_3"; + }; + + ptp_ext_pins: ptp-ext-pins { + /* 1pps input */ + pins = "GPIO_35"; + function = "ptpsync_0"; + }; + + udc_pins: ucd-pins { + /* VBUS_DET B */ + pins = "GPIO_8"; + function = "usb_slave_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_a_pins>; + pinctrl-names = "default"; + status = "okay"; + + ext_phy0: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy1: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy2: ethernet-phy@9 { + reg = <9>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy3: ethernet-phy@10 { + reg = <10>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy4: ethernet-phy@15 { + reg = <15>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy5: ethernet-phy@16 { + reg = <16>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy6: ethernet-phy@17 { + reg = <17>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy7: ethernet-phy@18 { + reg = <18>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; +}; + +&port0 { + reg = <2>; + phy-handle = <&ext_phy2>; + phy-mode = "qsgmii"; + phys = <&serdes 0 SERDES6G(1)>; + status = "okay"; +}; + +&port1 { + reg = <3>; + phy-handle = <&ext_phy3>; + phy-mode = "qsgmii"; + phys = <&serdes 1 SERDES6G(1)>; + status = "okay"; +}; + +&port2 { + reg = <0>; + phy-handle = <&ext_phy0>; + phy-mode = "qsgmii"; + phys = <&serdes 2 SERDES6G(1)>; + status = "okay"; +}; + +&port3 { + reg = <1>; + phy-handle = <&ext_phy1>; + phy-mode = "qsgmii"; + phys = <&serdes 3 SERDES6G(1)>; + status = "okay"; +}; + +&port4 { + reg = <6>; + phy-handle = <&ext_phy6>; + phy-mode = "qsgmii"; + phys = <&serdes 4 SERDES6G(2)>; + status = "okay"; +}; + +&port5 { + reg = <7>; + phy-handle = <&ext_phy7>; + phy-mode = "qsgmii"; + phys = <&serdes 5 SERDES6G(2)>; + status = "okay"; +}; + +&port6 { + reg = <4>; + phy-handle = <&ext_phy4>; + phy-mode = "qsgmii"; + phys = <&serdes 6 SERDES6G(2)>; + status = "okay"; +}; + +&port7 { + reg = <5>; + phy-handle = <&ext_phy5>; + phy-mode = "qsgmii"; + phys = <&serdes 7 SERDES6G(2)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&switch { + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&udc { + pinctrl-0 = <&udc_pins>; + pinctrl-names = "default"; + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; -- cgit From e9447260b4a1fb254052b60c9ea4f73c77dd0b34 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:27 +0300 Subject: ARM: dts: at91: sam9x60ek: remove simple-bus for regulators Keep regulators as individual devices. There is no need to have them under simple bus. This will throw compilation warnings like: - unnecessary #address-cells/#size-cells without "ranges" or child "reg" property. - node has a unit name, but no reg or ranges property. While at it move it down a bit in the file to keep entries sorted alphabetically. Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220826083927.3107272-10-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sam9x60ek.dts | 78 +++++++++++++++++------------------- 1 file changed, 36 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 81c38e101f58..7ade9979e1c6 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -34,48 +34,6 @@ }; }; - regulators: regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_1v8: fixed-regulator-vdd_1v8@0 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - status = "okay"; - }; - - vdd_1v15: fixed-regulator-vdd_1v15@1 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - status = "okay"; - }; - - vdd1_3v3: fixed-regulator-vdd1_3v3@2 { - compatible = "regulator-fixed"; - regulator-name = "VDD1_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - status = "okay"; - }; - - vdd2_3v3: regulator-fixed-vdd2_3v3@3 { - compatible = "regulator-fixed"; - regulator-name = "VDD2_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -111,6 +69,42 @@ linux,default-trigger = "heartbeat"; }; }; + + vdd_1v8: fixed-regulator-vdd_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + vdd_1v15: fixed-regulator-vdd_1v15 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + status = "okay"; + }; + + vdd1_3v3: fixed-regulator-vdd1_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD1_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + vdd2_3v3: regulator-fixed-vdd2_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; }; &adc { -- cgit From 2e78620b13509787a239c847b1ba576265a38bc4 Mon Sep 17 00:00:00 2001 From: Allen-KH Cheng Date: Fri, 26 Aug 2022 01:04:48 +0800 Subject: arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile MT8186 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55 and 2 CA76 cores. MT8186 share many HW IP with MT65xx series. We add basic chip support for MediaTek MT8186 on evaluation board. Signed-off-by: Allen-KH Cheng Link: https://lore.kernel.org/r/20220825170448.17024-1-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/Makefile | 1 + arch/arm64/boot/dts/mediatek/mt8186-evb.dts | 220 ++++++++ arch/arm64/boot/dts/mediatek/mt8186.dtsi | 819 ++++++++++++++++++++++++++++ 3 files changed, 1040 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index af362a085a02..0ec90cb3ef28 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -37,6 +37,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts new file mode 100644 index 000000000000..ed74a3617c13 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2022 MediaTek Inc. + */ +/dts-v1/; +#include "mt8186.dtsi" + +/ { + model = "MediaTek MT8186 evaluation board"; + compatible = "mediatek,mt8186-evb", "mediatek,mt8186"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <8000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <10000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; +}; + +&i2c5 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; +}; + +&i2c6 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; +}; + +&i2c7 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; +}; + +&i2c8 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; +}; + +&i2c9 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c9_pins>; +}; + +&pio { + i2c0_pins: i2c0-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c1_pins: i2c1-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c3_pins: i2c3-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c4_pins: i2c4-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c5_pins: i2c5-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c6_pins: i2c6-default-pins { + pins-bus { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c7_pins: i2c7-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c8_pins: i2c8-default-pins { + pins-bus { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <1000>; + input-enable; + }; + }; + + i2c9_pins: i2c9-default-pins { + pins-bus { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + input-enable; + }; + }; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi new file mode 100644 index 000000000000..64693c17af9e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -0,0 +1,819 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Allen-KH Cheng + */ +/dts-v1/; +#include +#include +#include +#include +#include +#include +#include + +/ { + compatible = "mediatek,mt8186"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu6>; + }; + + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <382>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2050000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2050000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <1600>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <1400>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010001>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <250>; + min-residency-us = <2100>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010001>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <250>; + min-residency-us = <1900>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l3_0: l3-cache { + compatible = "cache"; + }; + }; + + clk13m: oscillator-13m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "clk13m"; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = ; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupt-parent = <&gic>; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = ; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + mcusys: syscon@c53a000 { + compatible = "mediatek,mt8186-mcusys", "syscon"; + reg = <0 0xc53a000 0 0x1000>; + #clock-cells = <1>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8186-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8186-infracfg_ao", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8186-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8186-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x10002000 0 0x0200>, + <0 0x10002200 0 0x0200>, + <0 0x10002400 0 0x0200>, + <0 0x10002600 0 0x0200>, + <0 0x10002a00 0 0x0200>, + <0 0x10002c00 0 0x0200>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_lt", "iocfg_lm", "iocfg_lb", + "iocfg_bl", "iocfg_rb", "iocfg_rt", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 185>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8186-wdt", + "mediatek,mt6589-wdt"; + mediatek,disable-extrst; + reg = <0 0x10007000 0 0x1000>; + #reset-cells = <1>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8186-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8186-pwrap", "syscon"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = ; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8186-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = ; + clocks = <&clk13m>; + }; + + scp: scp@10500000 { + compatible = "mediatek,mt8186-scp"; + reg = <0 0x10500000 0 0x40000>, + <0 0x105c0000 0 0x19080>; + reg-names = "sram", "cfg"; + interrupts = ; + }; + + nor_flash: spi@11000000 { + compatible = "mediatek,mt8186-nor"; + reg = <0 0x11000000 0 0x1000>; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&infracfg_ao CLK_INFRA_AO_SPINOR>, + <&infracfg_ao CLK_INFRA_AO_FLASHIF_133M>, + <&infracfg_ao CLK_INFRA_AO_FLASHIF_66M>; + clock-names = "spi", "sf", "axi", "axi_s"; + assigned-clocks = <&topckgen CLK_TOP_SPINOR>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3_D8>; + interrupts = ; + status = "disabled"; + }; + + auxadc: adc@11001000 { + compatible = "mediatek,mt8186-auxadc", "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; + #io-channel-cells = <1>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8186-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8186-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11007000 0 0x1000>, + <0 0x10200100 0 0x100>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C0>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11008000 0 0x1000>, + <0 0x10200200 0 0x100>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C1>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11009000 0 0x1000>, + <0 0x10200300 0 0x180>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C2>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x1100f000 0 0x1000>, + <0 0x10200480 0 0x100>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C3>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11011000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11011000 0 0x1000>, + <0 0x10200580 0 0x180>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C4>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@11016000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11016000 0 0x1000>, + <0 0x10200700 0 0x100>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C5>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@1100d000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x1100d000 0 0x1000>, + <0 0x10200800 0 0x100>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C6>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@11004000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11004000 0 0x1000>, + <0 0x10200900 0 0x180>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C7>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@11005000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11005000 0 0x1000>, + <0 0x10200A80 0 0x180>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C8>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + pwm0: pwm@1100e000 { + compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = ; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM>, + <&infracfg_ao CLK_INFRA_AO_DISP_PWM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11014000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11014000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11015000 { + compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11015000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MAINPLL_D5>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + imp_iic_wrap: clock-controller@11017000 { + compatible = "mediatek,mt8186-imp_iic_wrap"; + reg = <0 0x11017000 0 0x1000>; + #clock-cells = <1>; + }; + + uart2: serial@11018000 { + compatible = "mediatek,mt8186-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11018000 0 0x1000>; + interrupts = ; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c9: i2c@11019000 { + compatible = "mediatek,mt8186-i2c"; + reg = <0 0x11019000 0 0x1000>, + <0 0x10200c00 0 0x180>; + interrupts = ; + clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C9>, + <&infracfg_ao CLK_INFRA_AO_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8186-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11cd0000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + interrupts = ; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_MSDCPLL>; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8186-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c90000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + interrupts = ; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + u3phy0: t-phy@11c80000 { + compatible = "mediatek,mt8186-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11c80000 0x1000>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + u3phy1: t-phy@11ca0000 { + compatible = "mediatek,mt8186-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11ca0000 0x1000>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + mediatek,discth = <0x8>; + }; + }; + + efuse: efuse@11cb0000 { + compatible = "mediatek,mt8186-efuse", "mediatek,efuse"; + reg = <0 0x11cb0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + mipi_tx0: dsi-phy@11cc0000 { + compatible = "mediatek,mt8183-mipi-tx"; + reg = <0 0x11cc0000 0 0x1000>; + clocks = <&clk26m>; + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "mipi_tx0_pll"; + status = "disabled"; + }; + + mfgsys: clock-controller@13000000 { + compatible = "mediatek,mt8186-mfgsys"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8186-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + wpesys: clock-controller@14020000 { + compatible = "mediatek,mt8186-wpesys"; + reg = <0 0x14020000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1: clock-controller@15020000 { + compatible = "mediatek,mt8186-imgsys1"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys2: clock-controller@15820000 { + compatible = "mediatek,mt8186-imgsys2"; + reg = <0 0x15820000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1602f000 { + compatible = "mediatek,mt8186-vdecsys"; + reg = <0 0x1602f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@17000000 { + compatible = "mediatek,mt8186-vencsys"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@1a000000 { + compatible = "mediatek,mt8186-camsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1a04f000 { + compatible = "mediatek,mt8186-camsys_rawa"; + reg = <0 0x1a04f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1a06f000 { + compatible = "mediatek,mt8186-camsys_rawb"; + reg = <0 0x1a06f000 0 0x1000>; + #clock-cells = <1>; + }; + + mdpsys: clock-controller@1b000000 { + compatible = "mediatek,mt8186-mdpsys"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@1c000000 { + compatible = "mediatek,mt8186-ipesys"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; -- cgit From 18222e059850f64637221de7f82fae38740b16aa Mon Sep 17 00:00:00 2001 From: Allen-KH Cheng Date: Tue, 12 Jul 2022 19:40:42 +0800 Subject: arm64: dts: mt8192: Add pwm node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add pwm node for mt8192 SoC. Signed-off-by: Allen-KH Cheng Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220712114046.15574-2-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 8cd5906fe3a8..b29486057580 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -598,6 +598,17 @@ status = "disabled"; }; + pwm0: pwm@1100e000 { + compatible = "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = ; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>, + <&infracfg CLK_INFRA_DISP_PWM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8192-spi", "mediatek,mt6765-spi"; -- cgit From 85c4ec6f7cf5d1ad1939617efad9f805a326f884 Mon Sep 17 00:00:00 2001 From: Allen-KH Cheng Date: Tue, 12 Jul 2022 19:40:43 +0800 Subject: arm64: dts: mt8192: Add mipi_tx node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add mipi_tx node for mt8192 SoC. Signed-off-by: Allen-KH Cheng Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220712114046.15574-3-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index b29486057580..8dce6609c726 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -1094,6 +1094,16 @@ }; }; + mipi_tx0: dsi-phy@11e50000 { + compatible = "mediatek,mt8183-mipi-tx"; + reg = <0 0x11e50000 0 0x1000>; + clocks = <&apmixedsys CLK_APMIXED_MIPID26M>; + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "mipi_tx0_pll"; + status = "disabled"; + }; + i2c0: i2c@11f00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11f00000 0 0x1000>, -- cgit From 7d3553788dd9cd51643e8071d28885e1ca13d669 Mon Sep 17 00:00:00 2001 From: Allen-KH Cheng Date: Tue, 12 Jul 2022 19:40:44 +0800 Subject: arm64: dts: mediatek: Add mmsys #reset-cells property for mt8192 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To support reset of mmsys, we include mt8192-resets.h and add property of #reset-cells in mmsys. Signed-off-by: Allen-KH Cheng Reviewed-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Tested-by: Nícolas F. R. A. Prado Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220712114046.15574-4-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 8dce6609c726..89d16de09132 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include / { compatible = "mediatek,mt8192"; @@ -1186,6 +1187,7 @@ compatible = "mediatek,mt8192-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; smi_common: smi@14002000 { -- cgit From b4b75bac952bd5393cae4b58ad1986b569fd7231 Mon Sep 17 00:00:00 2001 From: Allen-KH Cheng Date: Tue, 12 Jul 2022 19:40:45 +0800 Subject: arm64: dts: mt8192: Add display nodes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add display nodes and gce info for mt8192 SoC. GCE (Global Command Engine) properties to the display nodes in order to enable the usage of the CMDQ (Command Queue), which is required for operating the display. Signed-off-by: Allen-KH Cheng Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220712114046.15574-5-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 146 +++++++++++++++++++++++++++++++ 1 file changed, 146 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 89d16de09132..c8ae0285bb53 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include #include #include @@ -20,6 +21,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + ovl0 = &ovl0; + ovl-2l0 = &ovl_2l0; + ovl-2l2 = &ovl_2l2; + rdma0 = &rdma0; + rdma4 = &rdma4; + }; + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -553,6 +562,15 @@ assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; }; + gce: mailbox@10228000 { + compatible = "mediatek,mt8192-gce"; + reg = <0 0x10228000 0 0x4000>; + interrupts = ; + #mbox-cells = <2>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8192-scp_adsp"; reg = <0 0x10720000 0 0x1000>; @@ -1188,6 +1206,19 @@ reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; + }; + + mutex: mutex@14001000 { + compatible = "mediatek,mt8192-disp-mutex"; + reg = <0 0x14001000 0 0x1000>; + interrupts = ; + clocks = <&mmsys CLK_MM_DISP_MUTEX0>; + mediatek,gce-events = , + ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; }; smi_common: smi@14002000 { @@ -1221,6 +1252,121 @@ power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; }; + ovl0: ovl@14005000 { + compatible = "mediatek,mt8192-disp-ovl"; + reg = <0 0x14005000 0 0x1000>; + interrupts = ; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>, + <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + }; + + ovl_2l0: ovl@14006000 { + compatible = "mediatek,mt8192-disp-ovl-2l"; + reg = <0 0x14006000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; + iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>, + <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + }; + + rdma0: rdma@14007000 { + compatible = "mediatek,mt8192-disp-rdma", + "mediatek,mt8183-disp-rdma"; + reg = <0 0x14007000 0 0x1000>; + interrupts = ; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu0 M4U_PORT_L0_DISP_RDMA0>; + mediatek,rdma-fifo-size = <5120>; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>; + }; + + color0: color@14009000 { + compatible = "mediatek,mt8192-disp-color", + "mediatek,mt8173-disp-color"; + reg = <0 0x14009000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; + }; + + ccorr0: ccorr@1400a000 { + compatible = "mediatek,mt8192-disp-ccorr"; + reg = <0 0x1400a000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>; + }; + + aal0: aal@1400b000 { + compatible = "mediatek,mt8192-disp-aal", + "mediatek,mt8183-disp-aal"; + reg = <0 0x1400b000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_AAL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; + }; + + gamma0: gamma@1400c000 { + compatible = "mediatek,mt8192-disp-gamma", + "mediatek,mt8183-disp-gamma"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_GAMMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + }; + + postmask0: postmask@1400d000 { + compatible = "mediatek,mt8192-disp-postmask"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_POSTMASK0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; + }; + + dither0: dither@1400e000 { + compatible = "mediatek,mt8192-disp-dither", + "mediatek,mt8183-disp-dither"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + }; + + ovl_2l2: ovl@14014000 { + compatible = "mediatek,mt8192-disp-ovl-2l"; + reg = <0 0x14014000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL2_2L>; + iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>, + <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>; + }; + + rdma4: rdma@14015000 { + compatible = "mediatek,mt8192-disp-rdma", + "mediatek,mt8183-disp-rdma"; + reg = <0 0x14015000 0 0x1000>; + interrupts = ; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_RDMA4>; + iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>; + mediatek,rdma-fifo-size = <2048>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + }; + dpi0: dpi@14016000 { compatible = "mediatek,mt8192-dpi"; reg = <0 0x14016000 0 0x1000>; -- cgit From 0708ed7c2c63a60ee59dd50cdb50689571a234b3 Mon Sep 17 00:00:00 2001 From: Allen-KH Cheng Date: Tue, 12 Jul 2022 19:40:46 +0800 Subject: arm64: dts: mt8192: Add dsi node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add dsi node for mt8192 SoC. Signed-off-by: Allen-KH Cheng Reviewed-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Tested-by: Nícolas F. R. A. Prado Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220712114046.15574-6-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index c8ae0285bb53..64bf65b1b184 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -1344,6 +1344,25 @@ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; }; + dsi0: dsi@14010000 { + compatible = "mediatek,mt8183-dsi"; + reg = <0 0x14010000 0 0x1000>; + interrupts = ; + clocks = <&mmsys CLK_MM_DSI0>, + <&mmsys CLK_MM_DSI_DSI0>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>; + status = "disabled"; + + port { + dsi_out: endpoint { }; + }; + }; + ovl_2l2: ovl@14014000 { compatible = "mediatek,mt8192-disp-ovl-2l"; reg = <0 0x14014000 0 0x1000>; -- cgit From 3e4fec3bc8f8d1366cf2d8d8a054ed37e5a41cba Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 6 May 2022 18:21:04 +0300 Subject: arm64: dts: qcom: stop using snps,dw-pcie falback Qualcomm PCIe devices are not really compatible with the snps,dw-pcie. Unlike the generic IP core, they have special requirements regarding enabling clocks, toggling resets, using the PHY, etc. This is not to mention that platform snps-dw-pcie driver expects to find two IRQs declared, while Qualcomm platforms use just one. Acked-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220506152107.1527552-6-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9ab990061522..1881d810a429 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1297,7 +1297,7 @@ }; pcie: pci@10000000 { - compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; + compatible = "qcom,pcie-qcs404"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, <0x07780000 0x2000>, diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index bc773e210023..8124f38863e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1792,7 +1792,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -1893,7 +1893,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -2001,7 +2001,7 @@ }; pcie2: pci@1c10000 { - compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, -- cgit From f3f5fb3184ec0cd7f98267a8dc1c0538575fbb77 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 6 May 2022 18:21:07 +0300 Subject: arm64: dts: qcom: replace deprecated perst-gpio with perst-gpios Replace deprecated perst-gpio and wake-gpio properties with up-to-date perst-gpios and wake-gpios in the Qualcomm device trees. Acked-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 6 +++--- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++-- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++-- 8 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index c1cb1ba5173c..62e2f7eea276 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -502,20 +502,20 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 81dc3a0bcd7d..7143c936de61 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -51,12 +51,12 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 40415d988e4a..db4b87944cdf 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -39,12 +39,12 @@ &pcie0 { status = "ok"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie1 { status = "ok"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index e165b5e890a0..ca7c8d2e1d3d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -196,8 +196,8 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&pm8994_l28>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 1721ebe5759b..1678ef0f8684 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -99,7 +99,7 @@ &pcie { status = "okay"; - perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&perst_state>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 3f8996c00b05..59197acde13a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -446,7 +446,7 @@ ap_i2c_tpm: &i2c14 { pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index a74e0b730db6..ccbd9f7fc9a0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -248,7 +248,7 @@ &pcie1 { status = "okay"; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&nvme_3v3_regulator>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c6e2c571b452..c2db9c6a66a1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -522,7 +522,7 @@ &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>; @@ -540,7 +540,7 @@ &pcie1 { status = "okay"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; -- cgit From 38c5c4fe17014130dee4f85e663c5d919655801e Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Wed, 25 May 2022 16:44:01 +0200 Subject: arm64: dts: qcom: sm6350: Add interconnect support Add all the different NoC providers that are found in SM6350 and populate different nodes that use the interconnect properties. Signed-off-by: Luca Weiss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220525144404.200390-6-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 109 +++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index d06aefdf3d9e..6001abaa0f48 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1,11 +1,13 @@ // SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, Konrad Dybcio + * Copyright (c) 2022, Luca Weiss */ #include #include #include +#include #include #include #include @@ -539,6 +541,10 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -552,6 +558,10 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; }; @@ -578,6 +588,10 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -591,6 +605,10 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -604,6 +622,10 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; @@ -615,6 +637,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -628,11 +653,62 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sm6350-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm6350-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sm6350-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm6350-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm6350-aggre2-noc"; + reg = <0 0x01700000 0 0x1f880>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + compute_noc: interconnect-compute-noc { + compatible = "qcom,sm6350-compute-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm6350-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,sm6350-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -933,6 +1009,10 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -947,11 +1027,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <790000 131000>; + opp-avg-kBps = <50000 50000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3190000 294000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -1017,12 +1101,33 @@ }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sm6350-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; }; + gem_noc: interconnect@9680000 { + compatible = "qcom,sm6350-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sm6350-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -1054,6 +1159,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; -- cgit From 8373f5d50095c497305162ba8d076568862e867e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 4 Jul 2022 20:24:53 +0300 Subject: arm64: dts: qcom: msm8916: add clocks to the GCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the MMCC device tree node. Reviewed-by: Konrad Dybcio Reviewed-by: Marijn Suijten Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220704172453.838303-8-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 48bc2e09128d..de741f287e1d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -936,6 +936,20 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x01800000 0x80000>; + clocks = <&xo_board>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; }; tcsr_mutex: hwlock@1905000 { -- cgit From 2b96ef794caa539d52f8e8c85ef907b3bc601c27 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 5 Jul 2022 15:03:00 +0200 Subject: arm64: dts: qcom: msm8992-xiaomi-libra: split qcom,msm-id into tuples The qcom,msm-id is an uint32 matrix, so a list of tuples. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220705130300.100882-4-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index cbe11c060df9..c4e87d0aec42 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -17,7 +17,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <251 0 252 0>; + qcom,msm-id = <251 0>, <252 0>; qcom,pmic-id = <65545 65546 0 0>; qcom,board-id = <12 0>; -- cgit From 18f581bfe29de7c3ad33b3f2b2bd515623417494 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 14 Jul 2022 11:10:41 +0200 Subject: arm64: dts: qcom: msm8998: add MSM8998 SDCC specific compatible Add a MSM8998-specific SDCC compatible, because using only a generic qcom,sdhci-msm-v4 fallback is deprecated. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220714091042.22287-3-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 02d21bff2198..3643326e3ef7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -2076,7 +2076,7 @@ }; sdhc2: mmc@c0a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; -- cgit From 2fb19263442dda351e8bc2f6bd71f5a355971f1a Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 14 Jul 2022 14:34:04 +0200 Subject: arm64: dts: qcom: sm8450: Adjust memory map Fix up the camera region (cross-referenced different vendors' msm-5.10 drops, 9f500000 is the default location for SM8450) and reserve the second chunk occupied by xbl_sc. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220714123406.1919836-3-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 4978c5ba5dd0..3c39985fda51 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -438,11 +438,6 @@ no-map; }; - camera_mem: memory@85200000 { - reg = <0x0 0x85200000 0x0 0x500000>; - no-map; - }; - video_mem: memory@85700000 { reg = <0x0 0x85700000 0x0 0x700000>; no-map; @@ -505,6 +500,11 @@ no-map; }; + camera_mem: memory@9f500000 { + reg = <0x0 0x9f500000 0x0 0x800000>; + no-map; + }; + rmtfs_mem: memory@9fd00000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x9fd00000 0x0 0x280000>; @@ -514,6 +514,11 @@ qcom,vmid = <15>; }; + xbl_sc_mem2: memory@a6e00000 { + reg = <0x0 0xa6e00000 0x0 0x40000>; + no-map; + }; + global_sync_mem: memory@a6f00000 { reg = <0x0 0xa6f00000 0x0 0x100000>; no-map; -- cgit From 20e8f1ee8d2729589cd2c0b4a13df753667d6930 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 14 Jul 2022 14:34:05 +0200 Subject: arm64: dts: qcom: sm8450: Add SDHCI2 Add and configure the SDHCI host responsible for (mostly) SD Card and its corresponding pins' sleep states. Signed-off-by: Konrad Dybcio Acked-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220714123406.1919836-4-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 3c39985fda51..d5f20d45193d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2384,6 +2384,26 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + sdc2_sleep_state: sdc2-sleep { + clk { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie0_default_state: pcie0-default-state { perst { pins = "gpio94"; @@ -3145,6 +3165,45 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4a0 0x0>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; -- cgit From 0a631a36f7244d56fffcd0dd5bc473cf14571970 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 14 Jul 2022 14:34:06 +0200 Subject: arm64: dts: qcom: Add device tree for Sony Xperia 1 IV Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part of the SoMC SM8450 Nagara platform and currently it is the only device based on that board, so no -common DTSI is created until (if?) other Nagara devices appear. This commit brings support for: * SD Card * USB (*including SuperSpeed*) * ADSP/CDSP/SLPI (modem remains untested for now) * Most regulators (some GPIO-enabled ones require PMIC GPIOs but trying to access any SPMI device crashes the device..) * Part of I2C-connected peripherals (notably no touch due to a driver bug) * PCIe0 (PCIe1 is unused) Do note display via simplefb is not supported, as the display is blanked upon exiting XBL. To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8450-sony-xperia-\ nagara-pdx223.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 12 \ --os_patch_level 2022-06 \ # or newer -o boot.img-sony-xperia-pdx223 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: // You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system \ vbmeta_system.img fastboot flash boot boot.img-sony-xperia-pdx223 fastboot erase vendor_boot fastboot erase recovery fastboot flash dtbo emptydtbo.img fastboot reboot Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. Signed-off-by: Konrad Dybcio Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220714123406.1919836-5-konrad.dybcio@somainline.org --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts | 634 +++++++++++++++++++++ 2 files changed, 635 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1d86a33de528..804e7ec38eca 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -152,3 +152,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts new file mode 100644 index 000000000000..7fe582b92a61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio + */ + +/dts-v1/; + +#include +#include "sm8450.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; + +/ { + model = "Sony Xperia 1 IV"; + compatible = "sony,pdx223", "qcom,sm8450"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + adsp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x2800000>; + no-map; + }; + + video_mem: memory@9fd00000 { + reg = <0x0 0x9fd00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@f3300000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf3300000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x200000>; + console-size = <0x40000>; + record-size = <0x1000>; + ecc-size = <16>; + no-map; + }; + }; + + /* Sadly, the voltages for these GPIO regulators are unknown. */ + imx650_vana_vreg: imx650-vana-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx650_vana_vreg"; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s12>; + + /* + * ARC regulators: + * s5 - gfx.lvl + * l8 - lcx.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * ARC regulators: + * s2 - mxc.lvl + * s4 - mss.lvl + * s6 - cx.lvl + */ + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = ; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + /* + * ARC regulators: + * S2 - ebi.lvl + * S4 - mmcx.lvl + * S6 - mx.lvl + * L1 - lmx.lvl + */ + + pm8450_s3: smps3 { + regulator-name = "pm8450_s3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + }; + + pm8450_l2: ldo2 { + regulator-name = "pm8450_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + pm8450_l3: ldo3 { + regulator-name = "pm8450_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <435000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */ + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c14 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c19 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&pcie0 { + max-link-speed = <2>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_slpi { + firmware-name = "qcom/slpi.mbn"; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&spi10 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <28 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + ts_int_default: ts-int-default { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; + status = "okay"; +}; -- cgit From 030a7bfb365fd19714e25e9547764bff690cb227 Mon Sep 17 00:00:00 2001 From: Yunlong Jia Date: Thu, 21 Jul 2022 03:58:42 +0000 Subject: arm64: dts: qcom: Add SKU6 for sc7180-trogdor-pazquel-lte-parade SKU6 is LTE(w/o eSIM)+WIFI+Parade Signed-off-by: Yunlong Jia Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220721033918.v3.1.I10519ca1bf88233702a90e296088808d18cdc7b1@changeid --- arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts index 764c451c1a85..767cb7450c0d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -14,7 +14,7 @@ / { model = "Google Pazquel (Parade,LTE)"; - compatible = "google,pazquel-sku4", "qcom,sc7180"; + compatible = "google,pazquel-sku6", "google,pazquel-sku4", "qcom,sc7180"; }; &ap_sar_sensor_i2c { -- cgit From 995d1ac509fb92f3288a8eab3342a5667183fd2f Mon Sep 17 00:00:00 2001 From: "Lin, Meng-Bo" Date: Sun, 24 Jul 2022 09:55:31 +0000 Subject: arm64: dts: qcom: msm8916-samsung-e2015: Add initial common dtsi Samsung Galaxy E5, E7 and Grand Max are smartphones using the MSM8916 SoC released in 2015. e2015 and a2015 are similar, with some differences in accelerometer, MUIC and Vibrator. The common parts are shared in msm8916-samsung-a2015-common.dtsi to reduce duplication. Add a common device tree for with initial support for: - GPIO keys - GPIO LEDs for Grand Max - Regulator haptic - Hall sensor (except Grand Max) - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5504 MUIC) - WCNSS (WiFi/BT) - Regulators - S3FWRN5 NFC (except Grand Max) The three devices (and all other variants of E5/E7/Grand Max released in 2015) are very similar, with some differences in display, touchscreen, sensors and NFC. The common parts are shared in msm8916-samsung-e2015-common.dtsi to reduce duplication. Unfortunately, some E5/E7/Grand Max were released with outdated 32-bit only firmware and never received any update from Samsung. Since the 32-bit TrustZone firmware is signed there seems to be no way currently to actually boot this device tree on arm64 Linux on those variants at the moment. However, it is possible to use this device tree by compiling an ARM32 kernel instead. The device tree can be easily built on ARM32 with an #include and it works really well there. To avoid confusion for others it is still better to add this device tree on arm64. Otherwise it's easy to forget to update this one when making some changes that affect all MSM8916 devices. Maybe someone finds a way to boot ARM64 Linux on those device at some point. In this case I expect that this device tree can be simply used as-is. Co-developed-by: Stephan Gerhold Signed-off-by: Stephan Gerhold Signed-off-by: Lin, Meng-Bo Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220724095400.14081-1-linmengbo0689@protonmail.com --- arch/arm64/boot/dts/qcom/Makefile | 3 ++ .../dts/qcom/msm8916-samsung-e2015-common.dtsi | 59 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts | 24 +++++++++ arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts | 29 +++++++++++ .../boot/dts/qcom/msm8916-samsung-grandmax.dts | 56 ++++++++++++++++++++ 5 files changed, 171 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 804e7ec38eca..fa8f8b66bb02 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi new file mode 100644 index 000000000000..9caa8a161d31 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + i2c-muic { + /* SM5504 MUIC instead of SM5502 */ + /delete-node/ extcon@25; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; +}; + +&blsp_i2c2 { + /* lis2hh12 accelerometer instead of BMC150 */ + status = "disabled"; + + /delete-node/ accelerometer@10; + /delete-node/ magnetometer@12; +}; + +&msmgpio { + motor_en_default: motor-en-default { + pins = "gpio76"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts new file mode 100644 index 000000000000..777eb934eb4b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts + */ + +/ { + model = "Samsung Galaxy E5"; + compatible = "samsung,e5", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts new file mode 100644 index 000000000000..b412b61ca258 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts + */ + +/ { + model = "Samsung Galaxy E7"; + compatible = "samsung,e7", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&pm8916_l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts new file mode 100644 index 000000000000..4c1becdb9428 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" +#include + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts + */ + +/ { + model = "Samsung Galaxy Grand Max"; + compatible = "samsung,grandmax", "qcom,msm8916"; + chassis-type = "handset"; + + /delete-node/ gpio-hall-sensor; + /delete-node/ i2c-nfc; + /delete-node/ i2c-tkey; + + gpio-leds { + compatible = "gpio-leds"; + keyled { + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + }; + }; +}; + +®_motor_vdd { + gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; +}; + +&msmgpio { + gpio_leds_default: gpio-led-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&motor_en_default { + pins = "gpio72"; +}; -- cgit From 87c1b199e622bc2d9b16da5d870ab6b92db96154 Mon Sep 17 00:00:00 2001 From: "Lin, Meng-Bo" Date: Sun, 24 Jul 2022 09:55:37 +0000 Subject: ARM: dts: qcom-msm8916-samsung-e2015: Include dts from arm64 After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy E5/E7/Grand Max device trees from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Lin, Meng-Bo Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220724095413.14135-1-linmengbo0689@protonmail.com --- arch/arm/boot/dts/Makefile | 3 +++ arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts | 3 +++ arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts | 3 +++ arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts | 3 +++ 4 files changed, 12 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..3bc6bd5c8238 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1047,6 +1047,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-e5.dtb \ + qcom-msm8916-samsung-e7.dtb \ + qcom-msm8916-samsung-grandmax.dtb \ qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts new file mode 100644 index 000000000000..c8d34de8a71e --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-e5.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts new file mode 100644 index 000000000000..85be286c8608 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-e7.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts new file mode 100644 index 000000000000..d3abe0536238 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-grandmax.dts" +#include "qcom-msm8916-smp.dtsi" -- cgit From 90ca46731599ea364d2d8b5310341ab766fea637 Mon Sep 17 00:00:00 2001 From: "Lin, Meng-Bo" Date: Sun, 24 Jul 2022 09:55:43 +0000 Subject: arm64: dts: qcom: msm8916-samsung-e2015: Add touchkey On the Samsung Galaxy E5 and E7 the touch key is supplied by a single fixed regulator (enabled via GPIO 97) that supplies both MCU and LED. Add it to the device tree. Signed-off-by: Lin, Meng-Bo Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220724095426.14189-1-linmengbo0689@protonmail.com --- .../dts/qcom/msm8916-samsung-e2015-common.dtsi | 26 ++++++++++++++++++++++ .../boot/dts/qcom/msm8916-samsung-grandmax.dts | 4 ++++ 2 files changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 9caa8a161d31..542010fdfb8a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -38,6 +38,19 @@ pinctrl-names = "default"; pinctrl-0 = <&motor_en_default>; }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; }; &blsp_i2c2 { @@ -48,6 +61,11 @@ /delete-node/ magnetometer@12; }; +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_touch_key>; +}; + &msmgpio { motor_en_default: motor-en-default { pins = "gpio76"; @@ -56,4 +74,12 @@ drive-strength = <2>; bias-disable; }; + + tkey_en_default: tkey-en-default { + pins = "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 4c1becdb9428..bc7134698978 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -41,6 +41,10 @@ gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; }; +®_touch_key { + status = "disabled"; +}; + &msmgpio { gpio_leds_default: gpio-led-default { pins = "gpio60"; -- cgit From d749d52e251b094322315c359cca814adf2249cf Mon Sep 17 00:00:00 2001 From: "Lin, Meng-Bo" Date: Sun, 24 Jul 2022 09:55:44 +0000 Subject: arm64: dts: qcom: msm8916-samsung-a2015: Rename touchscreen analog regulator reg_vdd_tsp: regulator-vdd-tsp is actually used as an analog regulator for touchscreen on all of a2015 and e2015 devices. Rename it into reg_vdd_tsp_a: regulator-vdd-tsp-a to reduce confusion. Signed-off-by: Lin, Meng-Bo Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220724095438.14252-1-linmengbo0689@protonmail.com --- arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 4 ++-- arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 10f6509a8709..3255bd3fcb55 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -61,9 +61,9 @@ }; }; - reg_vdd_tsp: regulator-vdd-tsp { + reg_vdd_tsp_a: regulator-vdd-tsp-a { compatible = "regulator-fixed"; - regulator-name = "vdd_tsp"; + regulator-name = "vdd_tsp_a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index bc198a2eea25..6db5f78ca286 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -73,8 +73,8 @@ touchscreen-size-x = <540>; touchscreen-size-y = <960>; - vdd-supply = <®_vdd_tsp>; - vddo-supply = <&pm8916_l6>; + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8916_l6>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_default>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 7f2ab1891d91..5fb8ecd0c9ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -42,7 +42,7 @@ touchscreen-size-x = <720>; touchscreen-size-y = <1280>; - avdd-supply = <®_vdd_tsp>; + avdd-supply = <®_vdd_tsp_a>; vdd-supply = <&pm8916_l6>; pinctrl-names = "default"; -- cgit From f9aad4f098dc81b5859c27bfcf441cff418002a4 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 6 May 2022 18:21:05 +0300 Subject: ARM: dts: qcom: stop using snps,dw-pcie falback Qualcomm PCIe devices are not really compatible with the snps,dw-pcie. Unlike the generic IP core, they have special requirements regarding enabling clocks, toggling resets, using the PHY, etc. This is not to mention that platform snps-dw-pcie driver expects to find two IRQs declared, while Qualcomm platforms use just one. Acked-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220506152107.1527552-7-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ada4c828bf2f..257fcd497f86 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1384,7 +1384,7 @@ }; pcie: pci@1b500000 { - compatible = "qcom,pcie-apq8064", "snps,dw-pcie"; + compatible = "qcom,pcie-apq8064"; reg = <0x1b500000 0x1000>, <0x1b502000 0x80>, <0x1b600000 0x100>, diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index bb307b8f678c..c07c8a791497 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -412,7 +412,7 @@ }; pcie0: pci@40000000 { - compatible = "qcom,pcie-ipq4019", "snps,dw-pcie"; + compatible = "qcom,pcie-ipq4019"; reg = <0x40000000 0xf1d 0x40000f20 0xa8 0x80000 0x2000 -- cgit From a01bae600a0d07038ec686a18604bf86452633d8 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 6 May 2022 18:21:06 +0300 Subject: ARM: dts: qcom-*: replace deprecated perst-gpio with perst-gpios Replace deprecated perst-gpio properties with up-to-date perst-gpios in the arm32 Qualcomm Snapdragon device trees. Acked-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220506152107.1527552-8-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 2 +- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 2 +- arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 2 +- arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 +++--- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index e3bf57cd7423..529629a0a9dc 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -215,7 +215,7 @@ vdda_refclk-supply = <&v3p3_fixed>; pinctrl-0 = <&pcie_pins>; pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; amba { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 0322cb88d448..a7f90217661b 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -287,7 +287,7 @@ vdda_refclk-supply = <&ext_3p3v>; pinctrl-0 = <&pcie_pins>; pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; qcom,ssbi@500000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 44a9597d8bfd..bbcb5fef4405 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -100,7 +100,7 @@ pci@40000000 { status = "okay"; - perst-gpio = <&tlmm 38 0x1>; + perst-gpios = <&tlmm 38 0x1>; }; qpic-nand@79b0000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index c7a6e77da272..b85b9f894be6 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -10,7 +10,7 @@ soc { pci@40000000 { status = "okay"; - perst-gpio = <&tlmm 38 0x1>; + perst-gpios = <&tlmm 38 0x1>; }; spi@78b6000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index c8337c870bdb..a9bf2596a417 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -979,7 +979,7 @@ pinctrl-names = "default"; status = "disabled"; - perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; }; pcie1: pci@1b700000 { @@ -1030,7 +1030,7 @@ pinctrl-names = "default"; status = "disabled"; - perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; }; pcie2: pci@1b900000 { @@ -1081,7 +1081,7 @@ pinctrl-names = "default"; status = "disabled"; - perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; }; nss_common: syscon@03000000 { -- cgit From a9f2cd80ee4669c851d6953fbbb592a3ba44df9f Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 18 Jul 2022 18:18:24 +0200 Subject: ARM: dts: qcom: ipq8064: add v2 dtsi variant Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for some additional pcie, sata and usb configuration values, additional reserved memory and serial output. Signed-off-by: Christian Marangi Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220718161826.4943-1-ansuelsmth@gmail.com --- arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi | 37 +++++++++++++ arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi | 69 +++++++++++++++++++++++++ 2 files changed, 106 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi new file mode 100644 index 000000000000..0442580b22de --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064-v2.0.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi new file mode 100644 index 000000000000..2f117d576daf --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v2.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; +}; + +&gsbi4 { + qcom,mode = ; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ +}; + +&pcie0 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&pcie1 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&pcie2 { + compatible = "qcom,pcie-ipq8064-v2"; +}; + +&sata { + ports-implemented = <0x1>; +}; + +&ss_phy_0 { + qcom,rx-eq = <2>; + qcom,tx-deamp_3_5db = <32>; + qcom,mpll = <5>; +}; + +&ss_phy_1 { + qcom,rx-eq = <2>; + qcom,tx-deamp_3_5db = <32>; + qcom,mpll = <5>; +}; -- cgit From 58907a1cae53dd5f91a7dfb17ac8de10c60c32fd Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 18 Jul 2022 18:18:25 +0200 Subject: ARM: dts: qcom: ipq8064: add ipq8062 variant ipq8062 SoC is based on ipq8064-v2.0 with lower supported freq, lack of usb port and a reduced voltage output with the smb208 regulators. Signed-off-by: Christian Marangi Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220718161826.4943-2-ansuelsmth@gmail.com --- arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi | 37 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/qcom-ipq8062.dtsi | 8 +++++++ 2 files changed, 45 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi create mode 100644 arch/arm/boot/dts/qcom-ipq8062.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi new file mode 100644 index 000000000000..9d06255104c7 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "qcom-ipq8062.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom-ipq8062.dtsi new file mode 100644 index 000000000000..5d3ebd3e2e51 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8062"; + compatible = "qcom,ipq8062", "qcom,ipq8064"; +}; -- cgit From 12e621362be39350167ede99542256e768ecbfd6 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 18 Jul 2022 18:18:26 +0200 Subject: ARM: dts: qcom: ipq8064: add ipq8065 variant ipq8065 SoC is based on ipq8064-v2.0 with a more clocked CPU and an increased voltage output with the smb208 regulators. Signed-off-by: Christian Marangi Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220718161826.4943-3-ansuelsmth@gmail.com --- arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi | 37 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/qcom-ipq8065.dtsi | 8 +++++++ 2 files changed, 45 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi new file mode 100644 index 000000000000..803e6ff99ef8 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8065.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom-ipq8065.dtsi new file mode 100644 index 000000000000..ea49f6cc416d --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064-v2.0.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; +}; -- cgit From 5a0504945878b4af7534c1ce668a5678dc0201cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 19 Aug 2022 12:14:23 +0200 Subject: arm64: dts: qcom: sdm845-xiaomi-polaris: Fix sde_dsi_active pinctrl "make dtbs_check" says: bias-disable: boolean property with value b'\x00\x00\x00\x00' Fix this by dropping the offending value. Fixes: be497abe19bf08fb ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s") Signed-off-by: Geert Uytterhoeven Reviewed-by: Caleb Connolly Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/629afd26008c2b1ba5822799ea7ea5b5271895e8.1660903997.git.geert+renesas@glider.be --- arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 7747081b9887..dba7c2693ff5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -617,7 +617,7 @@ pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <8>; - bias-disable = <0>; + bias-disable; }; sde_dsi_suspend: sde-dsi-suspend { -- cgit From 100ce2205924a5253f73b598354d5dca97d37356 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:31:55 +0300 Subject: arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-3-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 742eac4ce9b3..3411ced96db6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -359,7 +359,7 @@ firmware { scm { compatible = "qcom,scm-msm8996", "qcom,scm"; - qcom,dload-mode = <&tcsr 0x13000>; + qcom,dload-mode = <&tcsr_2 0x13000>; }; }; @@ -840,10 +840,15 @@ tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; - reg = <0x00740000 0x40000>; + reg = <0x00740000 0x20000>; }; - tcsr: syscon@7a0000 { + tcsr_1: sycon@760000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x00760000 0x20000>; + }; + + tcsr_2: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x007a0000 0x18000>; }; @@ -2413,7 +2418,7 @@ qcom,smem-states = <&mpss_smp2p_out 0>; qcom,smem-state-names = "stop"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; status = "disabled"; -- cgit From 31df41b59b0e97bab38644903ec9111cfa2a0e53 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:31:56 +0300 Subject: arm64: dts: qcom: msm8996: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'reg' is a required property qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-4-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 3411ced96db6..166374566a49 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -363,12 +363,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -838,9 +832,10 @@ <&rpmcc RPM_SMD_PCNOC_A_CLK>; }; - tcsr_mutex_regs: syscon@740000 { - compatible = "syscon"; + tcsr_mutex: hwlock@740000 { + compatible = "qcom,tcsr-mutex"; reg = <0x00740000 0x20000>; + #hwlock-cells = <1>; }; tcsr_1: sycon@760000 { -- cgit From fc10cfa38580a09d150c14f71812f86f0babec7a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:31:57 +0300 Subject: arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-5-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3643326e3ef7..eb9552368a54 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1049,7 +1049,12 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x01f40000 0x40000>; + reg = <0x01f40000 0x20000>; + }; + + tcsr_regs_1: sycon@1f60000 { + compatible = "qcom,msm8998-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; }; tlmm: pinctrl@3400000 { @@ -1340,7 +1345,7 @@ resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmpd MSM8998_VDDCX>, <&rpmpd MSM8998_VDDMX>; -- cgit From 408c4eadd5d641b899db5eeacc2221273118a287 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:31:58 +0300 Subject: arm64: dts: qcom: msm8998: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'reg' is a required property qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-6-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index eb9552368a54..d463a66715ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -308,12 +308,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1047,9 +1041,10 @@ }; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; }; tcsr_regs_1: sycon@1f60000 { -- cgit From b5cc3e52d9932b382b5f72f108cd7da742b64450 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:31:59 +0300 Subject: arm64: dts: qcom: sc7180: add missing TCSR syscon compatible TCSR syscon node should come with dedicated compatible. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-7-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index b82c335c25af..49f28cb531f6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1468,7 +1468,7 @@ }; tcsr_regs: syscon@1fc0000 { - compatible = "syscon"; + compatible = "qcom,sc7180-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x40000>; }; -- cgit From ce1ac53c7faa5b7930c3a7e30b2fad547b1efe67 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:00 +0300 Subject: arm64: dts: qcom: sc7180: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-8-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 49f28cb531f6..5d2dd21da79c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1464,10 +1464,15 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + reg = <0 0x01f40000 0 0x20000>; }; - tcsr_regs: syscon@1fc0000 { + tcsr_regs_1: sycon@1f60000 { + compatible = "qcom,sc7180-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_regs_2: syscon@1fc0000 { compatible = "qcom,sc7180-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x40000>; }; @@ -1932,8 +1937,8 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - qcom,spare-regs = <&tcsr_regs 0xb3e4>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; status = "disabled"; -- cgit From e66e548bab5e93dfe0b958187785215c3c5d05b5 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:01 +0300 Subject: arm64: dts: qcom: sc7180: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'reg' is a required property qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-9-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 5d2dd21da79c..e8debb0da411 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -555,12 +555,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; @@ -1462,9 +1456,10 @@ status = "disabled"; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; }; tcsr_regs_1: sycon@1f60000 { -- cgit From d9a2214d6ba5b68ffbfc5798f23bd3e1720f7b3d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:02 +0300 Subject: arm64: dts: qcom: sc7280: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. This also describes more accurately the devices and their IO address space, and allows to remove incorrect syscon compatible from TCSR mutex: qcom/sc7280-herobrine-crd.dtb: hwlock@1f40000: compatible: ['qcom,tcsr-mutex', 'syscon'] is too long Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-10-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 13d7f267b289..89a8e6b9822a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2155,12 +2155,17 @@ }; tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex", "syscon"; - reg = <0 0x01f40000 0 0x40000>; + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; #hwlock-cells = <1>; }; - tcsr: syscon@1fc0000 { + tcsr_1: sycon@1f60000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_2: syscon@1fc0000 { compatible = "qcom,sc7280-tcsr", "syscon"; reg = <0 0x01fc0000 0 0x30000>; }; @@ -2522,9 +2527,9 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; - qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; - qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; + qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; status = "disabled"; @@ -3259,7 +3264,7 @@ <&pdc_reset PDC_WPSS_SYNC_RESET>; reset-names = "restart", "pdc_sync"; - qcom,halt-regs = <&tcsr_mutex 0x37000>; + qcom,halt-regs = <&tcsr_1 0x17000>; status = "disabled"; -- cgit From 8a8531e69b2db1df8bfcf66c990ba36919c48e21 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:03 +0300 Subject: arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-11-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 98d34b5e1df2..cff96cbbdf28 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2627,7 +2627,12 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0 0x01f40000 0 0x40000>; + reg = <0 0x01f40000 0 0x20000>; + }; + + tcsr_regs_1: sycon@1f60000 { + compatible = "qcom,sdm845-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; }; tlmm: pinctrl@3400000 { @@ -3244,7 +3249,7 @@ <&pdc_reset PDC_MODEM_SYNC_RESET>; reset-names = "mss_restart", "pdc_reset"; - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, -- cgit From 3ed99307ec842fdb63b1519a011cb74e66b8d9cd Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:04 +0300 Subject: arm64: dts: qcom: sdm845: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/sdm845-shift-axolotl.dtb: hwlock: 'reg' is a required property qcom/sdm845-shift-axolotl.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-12-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cff96cbbdf28..155e0cf164fc 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -919,12 +919,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; @@ -2625,9 +2619,10 @@ status = "disabled"; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; }; tcsr_regs_1: sycon@1f60000 { -- cgit From a465a9877e3a898925c1af80cb1acd88ce7816e6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:05 +0300 Subject: arm64: dts: qcom: qcs404: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-13-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 1881d810a429..46dbfd1094c8 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -295,12 +295,6 @@ hwlocks = <&tcsr_mutex 3>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - soc: soc@0 { #address-cells = <1>; #size-cells = <1>; @@ -726,9 +720,10 @@ assigned-clock-rates = <19200000>; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 { -- cgit From 0da6033872256e0f25f92a6b5cc311efee529966 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:06 +0300 Subject: arm64: dts: qcom: sdm630: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-14-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 1bc9091cad2a..a4f73be3d60a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -699,7 +699,12 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x01f40000 0x40000>; + reg = <0x01f40000 0x20000>; + }; + + tcsr_regs_1: sycon@1f60000 { + compatible = "qcom,sdm630-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; }; tlmm: pinctrl@3100000 { -- cgit From a4c82270f0f441977d8d54505fb269c1ee762234 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:07 +0300 Subject: arm64: dts: qcom: sdm630: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-15-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index a4f73be3d60a..9ae6610af93a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -697,9 +697,10 @@ #thermal-sensor-cells = <1>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; }; tcsr_regs_1: sycon@1f60000 { @@ -2356,12 +2357,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - sound: sound { }; -- cgit From 86d7c9460e2c0095bec80892b247f8c9f77bec82 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:08 +0300 Subject: arm64: dts: qcom: sm8150: split TCSR halt regs out of mutex The TCSR halt regs are next to TCSR mutex (in one address block called TCSR_MUTEX), so before converting the TCSR mutex into device with address space, we need to split the halt regs to its own syscon device. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-16-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 7d509ecd44da..6df2e6828282 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2056,7 +2056,12 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x0 0x01f40000 0x0 0x40000>; + reg = <0x0 0x01f40000 0x0 0x20000>; + }; + + tcsr_regs_1: sycon@1f60000 { + compatible = "qcom,sm8150-tcsr", "syscon"; + reg = <0x0 0x01f60000 0x0 0x20000>; }; remoteproc_slpi: remoteproc@2400000 { -- cgit From c752d491cd599b3205800678708e8b1f45844774 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 19 Aug 2022 11:32:09 +0300 Subject: arm64: dts: qcom: sm8150: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/sm8150-mtp.dtb: hwlock: 'reg' is a required property qcom/sm8150-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220819083209.50844-17-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 6df2e6828282..da737ba54490 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -585,12 +585,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -2054,9 +2048,10 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; }; tcsr_regs_1: sycon@1f60000 { -- cgit From ed3163b02a2c37744566d19fc451e6687aa2205d Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 12 Aug 2022 13:46:15 +0200 Subject: arm64: dts: qcom: pm6150l: add missing adc channels Add the missing adc channels and add pre-scaling property to die_temp channel, as per downstream dts. Signed-off-by: Luca Weiss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220812114614.1195679-1-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/pm6150l.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 7aa2ef90cb6a..f02c223ef448 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -20,10 +20,29 @@ #size-cells = <0>; #io-channel-cells = <1>; + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + adc-chan@6 { reg = ; + qcom,pre-scaling = <1 1>; label = "die_temp"; }; + + adc-chan@83 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; }; pm6150l_adc_tm: adc-tm@3500 { -- cgit From b0f8e8a38a010999f7b07617d874e3eb594a0a3e Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Fri, 12 Aug 2022 13:12:37 +0300 Subject: arm64: dts: qcom: sdm845: Reduce reg size for aoss_qmp Like on the other platforms that provide RPMh stats, on SDM845, the aoss_qmp reg size needs to be reduced to its actual size of 0x400, otherwise it will overlap with the RPMh stats reg base, node that will be added later on. Signed-off-by: Abel Vesa Acked-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220812101240.1869605-1-abel.vesa@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 155e0cf164fc..65691b9bd85e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4873,7 +4873,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts = ; mboxes = <&apss_shared 0>; -- cgit From 528dc60f9e5eadcfde651b1458da2b8d008a2cf0 Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Fri, 12 Aug 2022 13:12:39 +0300 Subject: arm64: dts: qcom: sdm845: Add the RPMh stats node SDM845 is a special case compared to the other platforms that use RPMh stats, since it only has 2 stats (aosd and cxsd), while the others have a 3rd one (ddr). So lets add the node but with a SDM845 dedicated compatible to make the driver aware of the different stats config. Signed-off-by: Abel Vesa Tested-by: Caleb Connolly Acked-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220812101240.1869605-3-abel.vesa@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 65691b9bd85e..347c3abc117b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4888,6 +4888,11 @@ }; }; + sram@c3f0000 { + compatible = "qcom,sdm845-rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, -- cgit From 9f0149caf0dc1c1261a612b0653d31d998f80596 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 12 Aug 2022 10:27:21 +0200 Subject: arm64: dts: qcom: sm6350: Add GPI DMA nodes Add nodes for the gpi_dma0 and gpi_dma1 which are (optionally) used for various i2c busses based on the qup firmware configuration. Signed-off-by: Luca Weiss Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220812082721.1125759-4-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 6001abaa0f48..d882c29d53aa 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -6,6 +6,7 @@ #include #include +#include #include #include #include @@ -519,6 +520,26 @@ }; }; + gpi_dma0: dma-controller@800000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x8c0000 0x0 0x2000>; @@ -539,6 +560,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = ; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, @@ -556,6 +580,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = ; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, @@ -566,6 +593,26 @@ }; }; + gpi_dma1: dma-controller@900000 { + compatible = "qcom,sm6350-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x4d6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x9c0000 0x0 0x2000>; @@ -586,6 +633,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = ; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, @@ -603,6 +653,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = ; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, @@ -620,6 +673,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = ; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, @@ -651,6 +707,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = ; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, -- cgit From cb9d7639491466d7296d30ec43045391c3a34651 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 11:05:13 +0300 Subject: ARM: dts: qcom: msm8960: override nodes by label Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220810080516.166866-1-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 623 ++++++++++++++++----------------- arch/arm/boot/dts/qcom-msm8960.dtsi | 6 +- 2 files changed, 314 insertions(+), 315 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index d1fd0fe12ffe..9157e3c4f48f 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -15,318 +15,6 @@ stdout-path = "serial0:115200n8"; }; - soc { - gsbi@16400000 { - status = "okay"; - qcom,mode = ; - serial@16440000 { - status = "okay"; - }; - }; - - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - }; - - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - }; - }; - - rpm@108000 { - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s4>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_ncp-supply = <&pm8921_l6>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l21_l23_l29-supply = <&pm8921_s8>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - /* Buck SMPS */ - pm8921_s1: s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - pm8921_s2: s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8921_s3: s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <4800000>; - bias-pull-down; - }; - - pm8921_s4: s4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - qcom,force-mode = ; - }; - - pm8921_s7: s7 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - pm8921_s8: s8 { - regulator-always-on; - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - /* PMOS LDO */ - pm8921_l1: l1 { - regulator-always-on; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8921_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8921_l3: l3 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - bias-pull-down; - }; - - pm8921_l4: l4 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8921_l5: l5 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l6: l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l7: l7 { - regulator-always-on; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l8: l8 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - pm8921_l9: l9 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - pm8921_l10: l10 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - pm8921_l11: l11 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8921_l12: l12 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8921_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8921_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l16: l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - bias-pull-down; - }; - - pm8921_l17: l17 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8921_l18: l18 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - bias-pull-down; - }; - - pm8921_l21: l21 { - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8921_l22: l22 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <2750000>; - bias-pull-down; - }; - - pm8921_l23: l23 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8921_l24: l24 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - pm8921_l25: l25 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - pm8921_lvs1: lvs1 { - bias-pull-down; - }; - - pm8921_lvs2: lvs2 { - bias-pull-down; - }; - - pm8921_lvs3: lvs3 { - bias-pull-down; - }; - - pm8921_lvs4: lvs4 { - bias-pull-down; - }; - - pm8921_lvs5: lvs5 { - bias-pull-down; - }; - - pm8921_lvs6: lvs6 { - bias-pull-down; - }; - - pm8921_lvs7: lvs7 { - bias-pull-down; - }; - - pm8921_ncp: ncp { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - }; - }; - }; - - gsbi@16000000 { - status = "okay"; - qcom,mode = ; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_default>; - spi@16080000 { - status = "okay"; - ethernet@0 { - compatible = "micrel,ks8851"; - reg = <0>; - interrupt-parent = <&msmgpio>; - interrupts = <90 8>; - spi-max-frequency = <5400000>; - vdd-supply = <&ext_l2>; - vdd-io-supply = <&pm8921_lvs6>; - reset-gpios = <&msmgpio 89 0>; - }; - }; - }; - - pinctrl@800000 { - spi1_default: spi1_default { - mux { - pins = "gpio6", "gpio7", "gpio9"; - function = "gsbi1"; - }; - - mosi { - pins = "gpio6"; - drive-strength = <12>; - bias-disable; - }; - - miso { - pins = "gpio7"; - drive-strength = <12>; - bias-disable; - }; - - cs { - pins = "gpio8"; - drive-strength = <12>; - bias-disable; - output-low; - }; - - clk { - pins = "gpio9"; - drive-strength = <12>; - bias-disable; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; @@ -340,6 +28,71 @@ }; }; +&gsbi1 { + qcom,mode = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_default>; + status = "okay"; +}; + +&gsbi1_spi { + status = "okay"; + + ethernet@0 { + compatible = "micrel,ks8851"; + reg = <0>; + interrupt-parent = <&msmgpio>; + interrupts = <90 8>; + spi-max-frequency = <5400000>; + vdd-supply = <&ext_l2>; + vdd-io-supply = <&pm8921_lvs6>; + reset-gpios = <&msmgpio 89 0>; + }; +}; + +&gsbi5 { + qcom,mode = ; + status = "okay"; +}; + +&gsbi5_serial { + status = "okay"; +}; + +&msmgpio { + spi1_default: spi1_default { + mux { + pins = "gpio6", "gpio7", "gpio9"; + function = "gsbi1"; + }; + + mosi { + pins = "gpio6"; + drive-strength = <12>; + bias-disable; + }; + + miso { + pins = "gpio7"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio8"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk { + pins = "gpio9"; + drive-strength = <12>; + bias-disable; + }; + }; +}; + &pmicintc { keypad@148 { linux,keymap = < @@ -352,3 +105,249 @@ keypad,num-columns = <5>; }; }; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = ; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +/* eMMC */ +&sdcc1 { + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 19554f3b5196..a5f1eda707b5 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -152,7 +152,7 @@ reg = <0x2011000 0x1000>; }; - rpm@108000 { + rpm: rpm@108000 { compatible = "qcom,rpm-msm8960"; reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; @@ -307,7 +307,7 @@ reg = <0x1a400000 0x100>; }; - gsbi@16000000 { + gsbi1: gsbi@16000000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <1>; reg = <0x16000000 0x100>; @@ -317,7 +317,7 @@ #size-cells = <1>; ranges; - spi@16080000 { + gsbi1_spi: spi@16080000 { compatible = "qcom,spi-qup-v1.1.1"; #address-cells = <1>; #size-cells = <0>; -- cgit From c77ad7f3ba7ffa05f49516732886f5feed95793b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 11:05:14 +0300 Subject: ARM: dts: qcom: msm8226: override nodes by label Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220810080516.166866-2-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts index d159188c8b95..290e1df631f0 100644 --- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts +++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts @@ -18,8 +18,6 @@ }; }; -&soc { - serial@f991f000 { - status = "ok"; - }; +&blsp1_uart3 { + status = "ok"; }; -- cgit From 5bd858a82ab77333b41bda9049fbaf6f878c11ab Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 11:05:15 +0300 Subject: ARM: dts: qcom: msm8660: override nodes by label Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220810080516.166866-3-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-msm8660-surf.dts | 41 ++++++++++++++++----------------- 1 file changed, 20 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 414280d9bdba..63b8f4285ace 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -16,14 +16,6 @@ }; soc { - gsbi@19c00000 { - status = "okay"; - qcom,mode = ; - serial@19c40000 { - status = "okay"; - }; - }; - /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; @@ -32,21 +24,16 @@ regulator-max-microvolt = <2700000>; regulator-always-on; }; + }; +}; - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - vmmc-supply = <&vsdcc_fixed>; - }; +&gsbi12 { + qcom,mode = ; + status = "okay"; +}; - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - vmmc-supply = <&vsdcc_fixed>; - }; - }; - }; +&gsbi12_serial { + status = "okay"; }; &pm8058 { @@ -76,3 +63,15 @@ keypad,num-columns = <5>; }; }; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&vsdcc_fixed>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&vsdcc_fixed>; + status = "okay"; +}; -- cgit From 7c7a05390b5e4f44787b6703e5a3b836c3327b0f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 11:05:16 +0300 Subject: ARM: dts: qcom: msm8660-surf: move fixed regulator out of soc Fixed regulators, like stub for SDCC Power, are not part of SoC, so they should be outside of the soc node. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220810080516.166866-4-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-msm8660-surf.dts | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 63b8f4285ace..be18f1be29a1 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -15,15 +15,13 @@ stdout-path = "serial0:115200n8"; }; - soc { - /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; }; }; -- cgit From 8c7ebabd2e3f33ef24378d3cac00d3e59886cecb Mon Sep 17 00:00:00 2001 From: Satya Priya Date: Wed, 10 Aug 2022 10:35:07 +0530 Subject: arm64: dts: qcom: sc7280: Cleanup the lpasscc node Remove "cc" regmap from lpasscc node which is overlapping with the lpass_aon regmap. Fixes: 422a295221bb ("arm64: dts: qcom: sc7280: Add clock controller nodes") Signed-off-by: Satya Priya Signed-off-by: Taniya Das Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1660107909-27947-2-git-send-email-quic_c_skakit@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 89a8e6b9822a..06e144e7a5f3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2173,9 +2173,8 @@ lpasscc: lpasscc@3000000 { compatible = "qcom,sc7280-lpasscc"; reg = <0 0x03000000 0 0x40>, - <0 0x03c04000 0 0x4>, - <0 0x03389000 0 0x24>; - reg-names = "qdsp6ss", "top_cc", "cc"; + <0 0x03c04000 0 0x4>; + reg-names = "qdsp6ss", "top_cc"; clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; clock-names = "iface"; #clock-cells = <1>; -- cgit From e02a16c23410a118e5497601871a2f8c3ea9bfd0 Mon Sep 17 00:00:00 2001 From: Taniya Das Date: Wed, 10 Aug 2022 10:35:08 +0530 Subject: arm64: dts: qcom: sc7280: Update lpassaudio clock controller for resets The lpass audio supports TX/RX/WSA block resets. Signed-off-by: Taniya Das Signed-off-by: Satya Priya Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1660107909-27947-3-git-send-email-quic_c_skakit@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 06e144e7a5f3..da9705f4f701 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2189,6 +2189,7 @@ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; #clock-cells = <1>; #power-domain-cells = <1>; + #reset-cells = <1>; }; lpass_aon: clock-controller@3380000 { -- cgit From d9a1e922730389afc425f2250de361b7f07acdbc Mon Sep 17 00:00:00 2001 From: Satya Priya Date: Wed, 10 Aug 2022 10:35:09 +0530 Subject: arm64: dts: qcom: sc7280: Update lpasscore node To maintain consistency with other lpass nodes(lpass_audiocc, lpass_aon and lpass_hm), update lpasscore to lpass_core. Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers") Signed-off-by: Taniya Das Signed-off-by: Satya Priya Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1660107909-27947-4-git-send-email-quic_c_skakit@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index da9705f4f701..1cba235745a2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2197,13 +2197,13 @@ reg = <0 0x03380000 0 0x30000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, - <&lpasscore LPASS_CORE_CC_CORE_CLK>; + <&lpass_core LPASS_CORE_CC_CORE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; #clock-cells = <1>; #power-domain-cells = <1>; }; - lpasscore: clock-controller@3900000 { + lpass_core: clock-controller@3900000 { compatible = "qcom,sc7280-lpasscorecc"; reg = <0 0x03900000 0 0x50000>; clocks = <&rpmhcc RPMH_CXO_CLK>; -- cgit From 412737a60c846a6adb7f7571905c200da036815e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 3 Aug 2022 14:19:40 +0200 Subject: arm64: dts: qcom: sc8280xp-crd: disallow regulator mode switches Do not allow the RPMh regulators to switch to low-power mode with an exception for the UFS regulators (l7c and l3d) as UFS supports an idle mode. This specifically avoids having regulators be but in low-power mode when only some consumers specify loads while the actual total load really warrants high-power mode. Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device") Link: https://lore.kernel.org/all/YtkrDcjTGhpaU1e0@hovoldconsulting.com Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220803121942.30236-2-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index d6f272c71a47..fea7d8273ccd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -87,7 +87,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; - regulator-allow-set-load; regulator-boot-on; regulator-always-on; }; @@ -97,7 +96,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l6b: ldo6 { @@ -105,7 +103,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; - regulator-allow-set-load; regulator-boot-on; }; }; @@ -119,7 +116,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l7c: ldo7 { @@ -135,7 +131,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; - regulator-allow-set-load; }; }; @@ -158,7 +153,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l6d: ldo6 { @@ -166,7 +160,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l7d: ldo7 { @@ -174,7 +167,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l9d: ldo9 { @@ -182,7 +174,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; - regulator-allow-set-load; }; }; }; -- cgit From 648ec2f2ddc05346287e308fbc31a6b8117a1edd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 3 Aug 2022 14:19:41 +0200 Subject: arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: disallow regulator mode switches Do not allow the RPMh regulators to switch to low-power mode. This specifically avoids having regulators be but in low-power mode when only some consumers specify loads while the actual total load really warrants high-power mode. Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree") Link: https://lore.kernel.org/all/YtkrDcjTGhpaU1e0@hovoldconsulting.com Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220803121942.30236-3-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 16c6e4d920bb..bdeb2d05aaa1 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -79,7 +79,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; - regulator-allow-set-load; regulator-boot-on; }; @@ -88,7 +87,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l6b: ldo6 { @@ -96,7 +94,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; - regulator-allow-set-load; regulator-boot-on; regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 }; @@ -111,7 +108,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l12c: ldo12 { @@ -119,7 +115,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l13c: ldo13 { @@ -127,7 +122,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; - regulator-allow-set-load; }; }; @@ -142,7 +136,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l4d: ldo4 { @@ -150,7 +143,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l7d: ldo7 { @@ -158,7 +150,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l9d: ldo9 { @@ -166,7 +157,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; - regulator-allow-set-load; }; }; }; -- cgit From 2a6164cef63cae77edbd9deef844b1774886fcb7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 3 Aug 2022 14:19:42 +0200 Subject: arm64: dts: qcom: sa8295p-adp: disallow regulator mode switches Do not allow the RPMh regulators to switch to low-power mode with an exception for the UFS regulators (l3c, l6c, l10c and l17c) as UFS supports an idle mode. This specifically avoids having regulators be but in low-power mode when only some consumers specify loads while the actual total load really warrants high-power mode. Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP") Link: https://lore.kernel.org/all/YtkrDcjTGhpaU1e0@hovoldconsulting.com Signed-off-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220803121942.30236-4-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 9398f0349944..ca5f5ad32ce5 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -35,7 +35,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l5a: ldo5 { @@ -43,7 +42,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l7a: ldo7 { @@ -51,7 +49,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l13a: ldo13 { @@ -59,7 +56,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; - regulator-allow-set-load; }; }; @@ -72,7 +68,6 @@ regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l2c: ldo2 { @@ -80,7 +75,6 @@ regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l3c: ldo3 { @@ -96,7 +90,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l6c: ldo6 { @@ -112,7 +105,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l10c: ldo10 { @@ -141,7 +133,6 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l7g: ldo7 { @@ -149,7 +140,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; - regulator-allow-set-load; }; vreg_l8g: ldo8 { @@ -157,7 +147,6 @@ regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; - regulator-allow-set-load; }; }; }; -- cgit From 32d6fa92c1fea834c978a83604c8413658212d2d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 2 Aug 2022 17:39:46 +0200 Subject: ARM: dts: qcom: use GPIO flags for tlmm Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220802153947.44457-5-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 3 ++- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 3 ++- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 4 ++-- arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 5 +++-- arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +- 5 files changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 3051a861ff0c..91716298ec5e 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#include #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" @@ -261,7 +262,7 @@ &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 62 0x1>; + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 03bb9e1768c4..0505270cf508 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -14,6 +14,7 @@ * */ +#include #include "qcom-ipq4019.dtsi" / { @@ -72,7 +73,7 @@ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; - cs-gpios = <&tlmm 54 0>; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; mx25l25635e@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index bbcb5fef4405..a63b3778636d 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -87,7 +87,7 @@ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; - cs-gpios = <&tlmm 12 0>; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; flash@0 { #address-cells = <1>; @@ -100,7 +100,7 @@ pci@40000000 { status = "okay"; - perst-gpios = <&tlmm 38 0x1>; + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; qpic-nand@79b0000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index b85b9f894be6..ea2987fcbff8 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, The Linux Foundation. All rights reserved. +#include #include "qcom-ipq4019-ap.dk07.1.dtsi" / { @@ -10,7 +11,7 @@ soc { pci@40000000 { status = "okay"; - perst-gpios = <&tlmm 38 0x1>; + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; spi@78b6000 { @@ -50,7 +51,7 @@ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; - cs-gpios = <&tlmm 12 0>; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; flash@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ec5d340562b6..6daceaa87802 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -175,7 +175,7 @@ ak8963@f { compatible = "asahi-kasei,ak8963"; reg = <0x0f>; - gpios = <&tlmm 67 0>; + gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; vid-supply = <&pm8941_lvs1>; vdd-supply = <&pm8941_l17>; }; -- cgit From 62e60e35309d977eac7f9775574ac01b5c7371fc Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 2 Aug 2022 17:39:43 +0200 Subject: arm64: dts: qcom: sdm845-db845c: drop power-domains from CCI I2C sensors The Camera Control Interface I2C controller device node belongs to TITAN_TOP_GDSC power domain, so its children do not need to specify it again. The OV7251 and OV8856 camera sensor bindings do not allow power-domains. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220802153947.44457-2-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c2db9c6a66a1..7172a68d970a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1228,8 +1228,6 @@ * both have to be enabled through the power management * gpios. */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - dovdd-supply = <&vreg_lvs1a_1p8>; avdd-supply = <&cam0_avdd_2v8>; dvdd-supply = <&cam0_dvdd_1v2>; @@ -1273,8 +1271,6 @@ * * No 1.2V vddd-supply regulator is used. */ - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - vdddo-supply = <&vreg_lvs1a_1p8>; vdda-supply = <&cam3_avdd_2v8>; -- cgit From a64f7d415281db0b727911de0035809f756b10d7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 2 Aug 2022 17:39:44 +0200 Subject: arm64: dts: qcom: sdm845-db845c: drop gpios from CCI I2C sensors The OV7251 and OV8856 camera sensor bindings do not allow property "gpios" and Linux driver does not parse it. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Robert Foss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220802153947.44457-3-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 7172a68d970a..4573d2eaf4ea 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1214,8 +1214,6 @@ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; - gpios = <&tlmm 13 0>, - <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; @@ -1256,8 +1254,6 @@ enable-gpios = <&tlmm 21 0>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; - gpios = <&tlmm 16 0>, - <&tlmm 21 0>; clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; clock-names = "xclk"; -- cgit From 36c9d012f193747d42af80b634217addd974c522 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 2 Aug 2022 17:39:45 +0200 Subject: arm64: dts: qcom: use GPIO flags for tlmm Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220802153947.44457-4-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 2 +- arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8994.dtsi | 3 ++- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ++- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 2 +- arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 2 +- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 2 +- 10 files changed, 14 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 567b33106556..92f264891d84 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -368,7 +368,7 @@ bus-width = <4>; - cd-gpios = <&tlmm 38 0x1>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index f430d797196f..ff60b7004d26 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -471,7 +471,7 @@ &sdhc2 { status = "okay"; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; vmmc-supply = <&pm8994_l21>; vqmmc-supply = <&pm8994_l13>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 8bc6c070e306..86ef0091caff 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include / { @@ -502,7 +503,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 166374566a49..1e6b70582866 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -3337,7 +3338,7 @@ interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; slim-ifc-dev = <&tasha_ifd>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 4573d2eaf4ea..132417e2d11e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1081,7 +1081,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; @@ -1251,7 +1251,7 @@ reg = <0x60>; // CAM3_RST_N - enable-gpios = <&tlmm 21 0>; + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 82c27f90d300..0f470cf1ed1c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -546,7 +546,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index dba7c2693ff5..fc0505e9320f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -126,7 +126,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&tlmm 23 0>; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; regulator-always-on; regulator-boot-on; enable-active-high; @@ -712,7 +712,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index a7af1bed4312..be59a8ba9c1f 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -772,7 +772,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index b0315eeb1320..f954fe5cb61a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -704,7 +704,7 @@ pinctrl-names = "default"; clock-names = "extclk"; clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - reset-gpios = <&tlmm 64 0>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-tx-supply = <&vreg_s4a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7ab3627cc347..a102aa5efa32 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -635,7 +635,7 @@ wcd938x: codec { compatible = "qcom,wcd9380-codec"; #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 0>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-rxtx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; -- cgit From d710fdfe484491679209ae0e11ac118da02f5d82 Mon Sep 17 00:00:00 2001 From: Yassine Oudjana Date: Thu, 28 Jul 2022 19:01:20 +0100 Subject: arm64: dts: qcom: msm8996-xiaomi-*: Add LEDs Add LEDs found on the Xiaomi MSM8996 devices. The devices share a status RGB LED mounted on the front, as well as a PWM-driven IR LED for remote control (sometimes known as an IR blaster). The Mi Note 2 has an additional pair of white LEDs used as backlights for the touchkeys driven by the PM8994 LPG block. Signed-off-by: Yassine Oudjana Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220728180120.97968-1-y.oudjana@protonmail.com --- .../arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 54 ++++++++++++++++++++++ .../arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 30 ++++++++++++ 2 files changed, 84 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 627649979891..ef9a8aa9c2b9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -58,6 +58,14 @@ }; }; + irled { + compatible = "pwm-ir-tx"; + pwms = <&pm8994_lpg 1 1000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&irled_default>; + }; + reserved-memory { memory@88800000 { reg = <0x0 0x88800000 0x0 0x1400000>; @@ -297,6 +305,41 @@ linux,code = ; }; +&pm8994_lpg { + status = "okay"; + + qcom,power-source = <1>; +}; + +&pmi8994_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -608,6 +651,17 @@ }; &pm8994_gpios { + irled_default: irled-default { + pinconf { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + }; + wlan_en_default: wlan-en-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index 30a9e4bed4af..0b47a659cc38 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -116,6 +116,25 @@ "qcom/msm8996/scorpio/modem.mbn"; }; +&pm8994_lpg { + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default>; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <1>; + }; + + led@6 { + reg = <6>; + color = ; + function = LED_FUNCTION_KBD_BACKLIGHT; + function-enumerator = <0>; + }; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -258,6 +277,17 @@ "PMIC_SLB", /* GPIO_20 */ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ + + keypad_default: keypad-default { + pinconf { + pins = "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + }; }; &pm8994_mpps { -- cgit From 2cb88ebe44531ba18c908e627811698c9461b4cb Mon Sep 17 00:00:00 2001 From: Bob Moragues Date: Thu, 28 Jul 2022 14:33:21 -0700 Subject: arm64: dts: qcom: sc7280: Add support for zoglin Zoglin is a Hoglin Chromebook with SPI Flash reduced from 64MB to 8MB. Zoglin is identical to Hoglin except for the SPI Flash. The actual SPI Flash is dynamically probed at and not specified in DTS. Signed-off-by: Bob Moragues Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220728143215.v3.2.I7d57fb9c4806a8b3fe3501c766b64f4987c271ef@changeid --- arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 7881bbc641a0..d17f9250e801 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -12,7 +12,7 @@ / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; - compatible = "google,hoglin", "qcom,sc7280"; + compatible = "google,zoglin", "google,hoglin", "qcom,sc7280"; /* FIXED REGULATORS */ -- cgit From eeca7d46217ccfe9289530e959c0fb29190af0d6 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Sun, 28 Aug 2022 14:26:48 +0100 Subject: arm64: dts: qcom: pm8350c: Drop PWM reg declaration The PWM is a part of the SPMI PMIC block and maps several different addresses within the SPMI block. It is not accurate to describe as pwm@reg as a result. Fixes: 5be66d2dc887 ("arm64: dts: qcom: pm8350c: Add pwm support") Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bryan O'Donoghue Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828132648.3624126-3-bryan.odonoghue@linaro.org --- arch/arm64/boot/dts/qcom/pm8350c.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index e0bbb67717fe..f28e71487d5c 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -30,9 +30,8 @@ #interrupt-cells = <2>; }; - pm8350c_pwm: pwm@e800 { + pm8350c_pwm: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #pwm-cells = <2>; status = "disabled"; }; -- cgit From 144fbd028fdec2deeb3b99d5e60dbf3167950ebe Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 26 Aug 2022 17:49:00 -0700 Subject: arm64: dts: qcom: sc7180-trogdor: Keep pm6150_adc enabled for TZ There's still a thermal zone using pm6150_adc in the pm6150.dtsi file, pm6150_thermal. It's not super obvious because it indirectly uses the adc through an iio channel in pm6150_temp. Let's keep this enabled on lazor and coachz so that reading the temperature of the pm6150_thermal zone continues to work. Otherwise we get -EINVAL when reading the zone, and I suspect the PMIC temperature trip doesn't work properly so we don't shutdown when the PMIC overheats. Cc: Matthias Kaehlcke Fixes: b8d1e3d33487 ("arm64: dts: qcom: sc7180-trogdor: Delete ADC config for unused thermistors") Signed-off-by: Stephen Boyd Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220827004901.511543-1-swboyd@chromium.org --- arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts | 2 -- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 8290d036044a..edfcd47e1a00 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -24,8 +24,6 @@ }; &pm6150_adc { - status = "disabled"; - /delete-node/ skin-temp-thermistor@4e; /delete-node/ charger-thermistor@4f; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 2cf7d5212c61..002663d752da 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -55,8 +55,6 @@ ap_ts_pen_1v8: &i2c4 { }; &pm6150_adc { - status = "disabled"; - /delete-node/ charger-thermistor@4f; }; -- cgit From 643d05163e3a18f224e4e1a80de09b2b74e1d249 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Fri, 26 Aug 2022 08:48:27 -0700 Subject: arm64: dts: qcom: sc7280-herobrine: Don't enable the USB 2.0 port The USB 2.0 port of sc7280 is currently not used by any herobrine board. Delete the device tree entries that enable it. Signed-off-by: Matthias Kaehlcke Reviewed-by: Konrad Dybcio Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220826084813.1.I8c9a771fcf4d1cfb6e8e0ef17a153143af9a644d@changeid --- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 59197acde13a..45f6a1e1002e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -606,18 +606,6 @@ ap_ec_spi: &spi10 { status = "okay"; }; -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; -}; - /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ &dp_hot_plug_det { -- cgit From 276ee34a40c1440544f609b54b23b99ead8f2205 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Fri, 26 Aug 2022 00:12:44 -0700 Subject: arm64: dts: qcom: sm8450: add Inline Crypto Engine registers and clock Add the registers and clock for the Inline Crypto Engine (ICE) to the device tree node for the UFS host controller on sm8450. This makes ufs_qcom support inline encryption when CONFIG_SCSI_UFS_CRYPTO=y. The address and size of the register range, and the minimum and maximum frequency of the ICE core clock, all match the values used downstream. I've validated this on an SM8450 HDK using the 'encrypt' group of xfstests on ext4 with MOUNT_OPTIONS="-o inlinecrypt". Signed-off-by: Eric Biggers Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220826071244.185584-1-ebiggers@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d5f20d45193d..d0ebf61a0074 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3094,7 +3094,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d88000 0 0x8000>; + reg-names = "std", "ice"; interrupts = ; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -3118,7 +3120,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -3127,7 +3130,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <75000000 300000000>, <0 0>, @@ -3136,7 +3140,8 @@ <75000000 300000000>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <75000000 300000000>; status = "disabled"; }; -- cgit From 9ea5ae629914c265c0ebb008865f93bd3480e09a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 22 Aug 2022 22:11:38 +0300 Subject: arm64: dts: qcom: sm8250: move DSI opp table to the dsi0 node It makes no sense to have the OPP table for the DSI controllers in the DSI1 PHY node. Move it to more logical dsi0 device node. Signed-off-by: Dmitry Baryshkov Reviewed-by: Caleb Connolly Reviewed-by: Konrad Dybcio Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220822191138.316912-1-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8124f38863e2..cf5d65940174 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -3571,6 +3571,25 @@ }; }; }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; dsi0_phy: dsi-phy@ae94400 { @@ -3663,25 +3682,6 @@ clock-names = "iface", "ref"; status = "disabled"; - - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-187500000 { - opp-hz = /bits/ 64 <187500000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; }; }; -- cgit From cab29d324a0531cf396bf0fe57868146918af245 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Mon, 29 Aug 2022 09:44:38 -0700 Subject: arm64: dts: qcom: sc7280-qcard: Add alias 'wifi0' Add the alias 'wifi0' for the WiFi interface on the Qcard. The alias is needed by the BIOS which patches the WiFi MAC address read from the VPD (Vital Product Data) into the device tree. Signed-off-by: Matthias Kaehlcke Reviewed-by: Konrad Dybcio Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220829094435.1.I4534cf408373478dd6e84dc8b9ddd0d4e1a3f143@changeid --- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7adf31bb9827..7cd91df7a118 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -28,6 +28,7 @@ bluetooth0 = &bluetooth; serial0 = &uart5; serial1 = &uart7; + wifi0 = &wifi; }; pm8350c_pwm_backlight: backlight { -- cgit From ad3b0f33fa54b472d11169c1f0ada1b1d0ca5c6f Mon Sep 17 00:00:00 2001 From: Akhil P Oommen Date: Mon, 29 Aug 2022 01:10:55 +0530 Subject: arm64: dts: qcom: sc7280: Update gpu opp table On the lite sku where GPU Fmax is 550Mhz, voting for a slightly higher bandwidth at the highest gpu opp helps to improve "Manhattan offscreen" score by 10%. Update the gpu opp table such that this is applicable only on SKUs which has 550Mhz as GPU Fmax. Signed-off-by: Akhil P Oommen Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220829011035.1.Ie3564662150e038571b7e2779cac7229191cf3bf@changeid --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 1cba235745a2..6a12223e442a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2357,11 +2357,19 @@ opp-supported-hw = <0x03>; }; - opp-550000000 { + /* Only applicable for SKUs which has 550Mhz as Fmax */ + opp-550000000-0 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x01>; + }; + + opp-550000000-1 { opp-hz = /bits/ 64 <550000000>; opp-level = ; opp-peak-kBps = <6832000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x02>; }; opp-608000000 { -- cgit From 448d8cdea68af91112614d4da8b4056d5b7ad7f1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:31 +0300 Subject: arm64: dts: qcom: pmk8350: drop incorrect io-channel-ranges Since commit 044b32fa5229 ("dt-bindings:iio:qcom-spmi-vadc drop incorrect io-channel-ranges from example") the io-channel-ranges are not allowed in the Qualcomm SPMI PMIC ADC and anyway they are not correct for IIO provider. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-5-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 0f94c46a1444..97c9f8ece2a6 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -41,7 +41,6 @@ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; interrupt-names = "eoc-int-en-set"; #io-channel-cells = <1>; - io-channel-ranges; }; pmk8350_adc_tm: adc-tm@3400 { -- cgit From 64a48a25aeb12a0c326255f6457c67c901279d59 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:32 +0300 Subject: arm64: dts: qcom: pmk8350: drop interrupt-names from ADC The SPMI PMIC VADC and Thermal Monitoring ADC have only one interrupt line and their bindings do not allow interrupt-names. None of other variants use them, so drop it from DTSI. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-6-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 97c9f8ece2a6..a7ec9d11946d 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -39,7 +39,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "eoc-int-en-set"; #io-channel-cells = <1>; }; @@ -47,7 +46,6 @@ compatible = "qcom,adc-tm7"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "threshold"; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>; -- cgit From fe9132202a0bbbf0b3863b491e313b73783a17b6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:33 +0300 Subject: arm64: dts: qcom: align SPMI PMIC ADC node name with dtschema Bindings expect VADC node name to be "adc": pmic@0: 'vadc@3100' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-7-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pm8953.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi index 741c538a9cee..a1d36f9ebbd2 100644 --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -45,7 +45,7 @@ #thermal-sensor-cells = <0>; }; - pm8953_vadc: vadc@3100 { + pm8953_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x00 0x31 0x00 0x01>; -- cgit From c29ed5af6f3af7f8c74e41a97917db7a064a7984 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:34 +0300 Subject: arm64: dts: qcom: align SPMI PMIC regulators node name with dtschema Bindings expect regulators node name to be "regulators": qcom/sdm630-sony-xperia-nile-voyager.dtb: pmic@3: 'pm660l-regulators' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Reviewed-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-8-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm660l.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index d0eefbb51663..e1622b16c08b 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -187,7 +187,7 @@ #address-cells = <1>; #size-cells = <0>; - pm660_spmi_regulators: pm660-regulators { + pm660_spmi_regulators: regulators { compatible = "qcom,pm660-regulators"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index c7945470ffee..8957c6a8c92f 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -81,7 +81,7 @@ status = "disabled"; }; - pm660l_spmi_regulators: pm660l-regulators { + pm660l_spmi_regulators: regulators { compatible = "qcom,pm660l-regulators"; }; }; -- cgit From 15f50a487121f382f95975ad6cce14a2fe51baa3 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:35 +0300 Subject: arm64: dts: qcom: align SPMI PMIC LPG node name with dtschema Bindings expect LPG/PWM node name to be "pwm": pmic@5: 'lpg' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Reviewed-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-9-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pm660l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8994.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi8994.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 8957c6a8c92f..8aa0a5078772 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -65,7 +65,7 @@ #address-cells = <1>; #size-cells = <0>; - pm660l_lpg: lpg@b100 { + pm660l_lpg: pwm { compatible = "qcom,pm660l-lpg"; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 5d1ec3a6cc3c..47f74b547a3a 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8150b_lpg: lpg { + pm8150b_lpg: pwm { compatible = "qcom,pm8150b-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index c62d023b39a2..e1479e6a371e 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8150l_lpg: lpg { + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index ab342397fcd8..e92e5ac414d3 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8994_lpg: lpg { + pm8994_lpg: pwm { compatible = "qcom,pm8994-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 84c44912ec93..2e8b58f944e9 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -37,7 +37,7 @@ #address-cells = <1>; #size-cells = <0>; - pmi8994_lpg: lpg { + pmi8994_lpg: pwm { compatible = "qcom,pmi8994-lpg"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 6d3d212560c1..3852a012bb0f 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -42,7 +42,7 @@ }; }; - pmi8998_lpg: lpg { + pmi8998_lpg: pwm { compatible = "qcom,pmi8998-lpg"; #address-cells = <1>; -- cgit From 87783dbe1c289adf0998aed0fb4bb846130ec580 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:36 +0300 Subject: arm64: dts: qcom: align SPMI PMIC Power-on node name with dtschema Bindings expect Power-on node name to be "pon": 'power-on@800' do not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Reviewed-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-10-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index fd8434215924..574fa95a2871 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8998-pon"; reg = <0x0800>; mode-bootloader = <0x2>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 47f74b547a3a..cdded791d96e 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index e1479e6a371e..135bfb8d629b 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index 68e9122363ae..20c5d60c8c2c 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; pwrkey { diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi index c307fc662511..1da4606e8ee6 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; -- cgit From 09a19abffbd54c20809acb969ebbacc25178f720 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:37 +0300 Subject: arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix: qcom/sc7280-herobrine-crd.dtb: pmic@2: gpio@8800: 'edp-bl-reg-en' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Reviewed-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-11-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index d17f9250e801..bc795c480352 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -167,7 +167,7 @@ ap_ts_pen_1v8: &i2c13 { "PMIC_EDP_BL_PWM", ""; - edp_bl_reg_en: edp-bl-reg-en { + edp_bl_reg_en: edp-bl-reg-en-state { pins = "gpio6"; function = "normal"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index fc0505e9320f..afc17e4d403f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -522,7 +522,7 @@ }; &pm8998_gpio { - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { qcom,drive-strength = ; function = "normal"; -- cgit From 5589ffb2da2a66988ab3a68334dad3e68b42e3a9 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:38 +0300 Subject: arm64: dts: qcom: sc7280-idp: correct ADC channel node name and unit address Correct SPMI PMIC VADC channel node name: 1. Use hyphens instead of underscores, 2. Add missing unit address. This fixes `make dtbs_check` warnings like: qcom/sc7280-idp.dtb: pmic@0: adc@3100: 'pmk8350_die_temp', 'pmr735a_die_temp' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Reviewed-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-12-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7280-idp.dts | 2 +- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 6d3ff80582ae..e2e37a0292ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -78,7 +78,7 @@ }; &pmk8350_vadc { - pmr735a_die_temp { + pmr735a-die-temp@403 { reg = ; label = "pmr735a_die_temp"; qcom,pre-scaling = <1 1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ccbd9f7fc9a0..0c48db69e1ef 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -264,7 +264,7 @@ }; &pmk8350_vadc { - pmk8350_die_temp { + pmk8350-die-temp@3 { reg = ; label = "pmk8350_die_temp"; qcom,pre-scaling = <1 1>; -- cgit From 209a04885ab5f76722a1671d0fbf0a5b4bccacec Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:39 +0300 Subject: arm64: dts: qcom: sdm845-mtp: correct ADC settle time The PMIC's VADC property for settle time is qcom,hw-settle-time, not qcom,hw-settle-time-us. The latter is used in PMIC's TM ADC. qcom/sdm845-mtp.dtb: pmic@0: adc@3100:adc-chan@4c: 'qcom,hw-settle-time-us' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: d5e12f3823ae ("arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Reviewed-by: David Heidelberg Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-13-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 7713e8060c5b..de2d10e0315a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -536,42 +536,42 @@ reg = ; label = "xo_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@4d { reg = ; label = "msm_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@4f { reg = ; label = "pa_therm1"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@51 { reg = ; label = "quiet_therm"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@83 { reg = ; label = "vph_pwr"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; adc-chan@85 { reg = ; label = "vcoin"; qcom,ratiometric; - qcom,hw-settle-time-us = <200>; + qcom,hw-settle-time = <200>; }; }; -- cgit From 662e305dfc29b96913a03dde1e89e8968da65238 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:28 +0300 Subject: ARM: dts: qcom: align SPMI PMIC ADC node name with dtschema Bindings expect VADC node name to be "adc": pmic@0: 'vadc@3100' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: David Heidelberg Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-2-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +- arch/arm/boot/dts/qcom-pma8084.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 59d0cde63251..3e5c85fbed7b 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -93,7 +93,7 @@ #thermal-sensor-cells = <0>; }; - pm8941_vadc: vadc@3100 { + pm8941_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 7b8a8d9695da..e77602e9f95c 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -56,7 +56,7 @@ io-channel-names = "thermal"; }; - pma8084_vadc: vadc@3100 { + pma8084_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; -- cgit From 7b357d3126226b7ec4810e26f4ded44b2286d197 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:29 +0300 Subject: ARM: dts: qcom: pm8941: align SPMI PMIC LPG node name with dtschema Bindings expect LPG/PWM node name to be "pwm": pmic@5: 'lpg' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: David Heidelberg Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-3-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 3e5c85fbed7b..9cd49deb9fa7 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -144,7 +144,7 @@ #address-cells = <1>; #size-cells = <0>; - pm8941_lpg: lpg { + pm8941_lpg: pwm { compatible = "qcom,pm8941-lpg"; #address-cells = <1>; -- cgit From 4bdfd92cb14d97ef58600926ea6b2788b31c719f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 28 Aug 2022 11:43:30 +0300 Subject: ARM: dts: qcom: pmx55: align SPMI PMIC Power-on node name with dtschema Bindings expect Power-on node name to be "pon": 'power-on@800' do not match any of the regexes Signed-off-by: Krzysztof Kozlowski Reviewed-by: David Heidelberg Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220828084341.112146-4-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-pmx55.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi index 9de7578a4c5f..e1b869480bbd 100644 --- a/arch/arm/boot/dts/qcom-pmx55.dtsi +++ b/arch/arm/boot/dts/qcom-pmx55.dtsi @@ -16,7 +16,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; -- cgit From 1cc6987e501d9cb5b83c26da1f07f5e662db7c4c Mon Sep 17 00:00:00 2001 From: Duc Nguyen Date: Mon, 29 Aug 2022 14:41:30 +0200 Subject: arm64: dts: renesas: r8a779f0: Add MSIOF nodes Add MSIOF nodes for R-Car S4-8. Signed-off-by: Duc Nguyen [thanh: added DMA] Signed-off-by: Thanh Quan [wsa: removed mso clock from clocks-property] Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220829124130.2412-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 64 +++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index 11c30e36a962..c2f152bcf10e 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -719,6 +719,70 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 618>; + dmas = <&dmac0 0x41>, <&dmac0 0x40>, + <&dmac1 0x41>, <&dmac1 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 618>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 619>; + dmas = <&dmac0 0x43>, <&dmac0 0x42>, + <&dmac1 0x43>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 619>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 620>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>, + <&dmac1 0x45>, <&dmac1 0x44>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 620>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a779f0", + "renesas,rcar-gen4-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 621>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>, + <&dmac1 0x47>, <&dmac1 0x46>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 621>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779f0", "renesas,rcar-gen4-dmac"; -- cgit From 6210fc2e4ca2551cb09fd122ee49ebcf64487f3e Mon Sep 17 00:00:00 2001 From: "Nícolas F. R. A. Prado" Date: Fri, 8 Jul 2022 15:43:14 -0400 Subject: arm64: dts: mediatek: Add missing xHCI clocks for mt8192 and mt8195 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MediaTek xHCI dt-binding expects a specific order for the clocks, but the mt8192 and mt8195 devicetrees were skipping some of the middle clocks. These clocks are wired to the controller hardware but aren't controllable. Add the missing clocks as handles to fixed clocks, so that the clock order is respected and the dtbs_check warnings are gone. Signed-off-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220708194314.56922-1-nfraprado@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 9 ++++++--- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 18 ++++++++++++++---- 2 files changed, 20 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 64bf65b1b184..6b20376191a7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -753,9 +753,12 @@ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&infracfg CLK_INFRA_SSUSB>, - <&infracfg CLK_INFRA_SSUSB_XHCI>, - <&apmixedsys CLK_APMIXED_USBPLL>; - clock-names = "sys_ck", "xhci_ck", "ref_ck"; + <&apmixedsys CLK_APMIXED_USBPLL>, + <&clk26m>, + <&clk26m>, + <&infracfg CLK_INFRA_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; wakeup-source; mediatek,syscon-wakeup = <&pericfg 0x420 102>; status = "disabled"; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index a50ebb5d145f..905d1a90b406 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1058,8 +1058,10 @@ clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>, <&topckgen CLK_TOP_SSUSB_REF>, <&apmixedsys CLK_APMIXED_USB1PLL>, + <&clk26m>, <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 103>; wakeup-source; status = "disabled"; @@ -1123,8 +1125,10 @@ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>, <&topckgen CLK_TOP_SSUSB_P1_REF>, <&apmixedsys CLK_APMIXED_USB1PLL>, + <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>; - clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 104>; wakeup-source; status = "disabled"; @@ -1144,8 +1148,11 @@ <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, <&topckgen CLK_TOP_SSUSB_P2_REF>, + <&clk26m>, + <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; - clock-names = "sys_ck", "ref_ck", "xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 105>; wakeup-source; status = "disabled"; @@ -1165,8 +1172,11 @@ <&topckgen CLK_TOP_UNIVPLL_D5_D4>; clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, <&topckgen CLK_TOP_SSUSB_P3_REF>, + <&clk26m>, + <&clk26m>, <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; - clock-names = "sys_ck", "ref_ck", "xhci_ck"; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", + "xhci_ck"; mediatek,syscon-wakeup = <&pericfg 0x400 106>; wakeup-source; status = "disabled"; -- cgit From 5334bed7b2344115928cca4c1a63b32ccde1814d Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Wed, 31 Aug 2022 14:51:00 +0800 Subject: arm64: dts: mediatek: Fix build warnings of mt8173 vcodec nodes Correct the phandle of power domain node referenced by vcodec nodes. arch/arm64/boot/dts/mediatek/mt8173.dtsi:1450.35-1471.5: Warning (power_domains_property): /soc/vcodec@18002000: Missing property '#power-domain-cells' in node /soc/syscon@10006000 or bad phandle (referred from power-domains[0]) arch/arm64/boot/dts/mediatek/mt8173.dtsi:1502.35-1522.5: Warning (power_domains_property): /soc/vcodec@19002000: Missing property '#power-domain-cells' in node /soc/syscon@10006000 or bad phandle (referred from power-domains[0]) Fixes: d3dfd4688574 ("arm64: dts: mediatek: Update mt81xx scpsys node to align with dt-bindings") Signed-off-by: Tinghan Shen Link: https://lore.kernel.org/r/20220831065100.27722-1-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index b4d48f8b7eeb..7640b5158ff9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -1467,7 +1467,7 @@ clock-names = "venc_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC>; }; jpegdec: jpegdec@18004000 { @@ -1518,7 +1518,7 @@ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>; + power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>; }; }; }; -- cgit From 0058d4814faadf4134d5f2cd22fbe721d4c9155e Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Mon, 22 Aug 2022 11:59:43 +0200 Subject: arm64: dts: ti: k3-am64-main: Add main_cpts label Makes it easier to reference the node in board dts files. Signed-off-by: Christian Gmeiner Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20220822095943.18563-1-christian.gmeiner@gmail.com --- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index ada00575f0f2..a364c174d727 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -550,7 +550,7 @@ }; }; - cpts@39000000 { + main_cpts0: cpts@39000000 { compatible = "ti,j721e-cpts"; reg = <0x0 0x39000000 0x0 0x400>; reg-names = "cpts"; -- cgit From e66e5b2d7f43d92fffb940988ed2822a1b28143b Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 11 Jul 2022 14:27:42 +0530 Subject: arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges Add the address space for the SA2UL in MAIN domain to the ranges property of the cbass_main interconnect node so that the addresses within the corresponding sram nodes and its children can be translated properly by the relevant OF address API. Signed-off-by: Suman Anna Signed-off-by: Jayesh Choudhary Signed-off-by: Vignesh Raghavendra Reviewed-by: Kamlesh Gurudasani Link: https://lore.kernel.org/r/20220711085743.10128-2-j-choudhary@ti.com --- arch/arm64/boot/dts/ti/k3-am64.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 016dd8511ca6..c858725133af 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -82,6 +82,7 @@ <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */ <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */ <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2_UL0 */ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */ -- cgit From e170ae6dd67a00f750996820d55b144c5189be66 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 11 Jul 2022 14:27:43 +0530 Subject: arm64: dts: ti: k3-am64-main: Enable crypto accelerator Add the node for SA2UL. Signed-off-by: Peter Ujfalusi [s-anna@ti.com: drop label, minor cleanups] Signed-off-by: Suman Anna [j-choudhary@ti.com: disable rng-node, change flag to shared] Signed-off-by: Jayesh Choudhary Signed-off-by: Vignesh Raghavendra Reviewed-by: Kamlesh Gurudasani Link: https://lore.kernel.org/r/20220711085743.10128-3-j-choudhary@ti.com --- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index a364c174d727..744629cb6725 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -1308,4 +1308,24 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + crypto: crypto@40900000 { + compatible = "ti,am64-sa2ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + power-domains = <&k3_pds 133 TI_SCI_PD_SHARED>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + dmas = <&main_pktdma 0xc001 0>, <&main_pktdma 0x4002 0>, + <&main_pktdma 0x4003 0>; + dma-names = "tx", "rx1", "rx2"; + + rng: rng@40910000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x40910000 0x00 0x7d>; + interrupts = ; + clocks = <&k3_clks 133 1>; + status = "disabled"; /* Used by OP-TEE */ + }; + }; }; -- cgit From f42f6f9e77ee6b1b86c006d0436ba303901529a9 Mon Sep 17 00:00:00 2001 From: Daniel Parks Date: Mon, 8 Aug 2022 13:32:00 -0500 Subject: arm64: dts: ti: k3-j721e-main: fix RNG node clock id The RNG node for this platform claims pka_in_clk. Change it to claim the correct clock x1_clk. [1] [1]: https://downloads.ti.com/tisci/esd/latest/5_soc_doc/j721e/clocks.html#clocks-for-sa2-ul0-device Signed-off-by: Daniel Parks Signed-off-by: Vignesh Raghavendra Reviewed-by: Jayesh Choudhary Link: https://lore.kernel.org/r/f29e2c65dc7310a926af8a676651592afac04b03.1659981162.git.danielrparks@ti.com --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 43b6cf5791ee..917c9dc99efa 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -343,7 +343,7 @@ compatible = "inside-secure,safexcel-eip76"; reg = <0x0 0x4e10000 0x0 0x7d>; interrupts = ; - clocks = <&k3_clks 264 1>; + clocks = <&k3_clks 264 2>; }; }; -- cgit From 5ec06904310da6441097c8f2d6e3fb196f42bca1 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 2 Aug 2022 13:44:55 +0300 Subject: arm64: dts: ti: k3-am64-main: Add GPMC memory controller node The GPMC is a unified memory controller dedicated for interfacing with external memory devices like - Asynchronous SRAM-like memories and ASICs - Asynchronous, synchronous, and page mode burst NOR flash - NAND flash - Pseudo-SRAM devices Signed-off-by: Roger Quadros Signed-off-by: Vignesh Raghavendra Reviewed-by: Vignesh Raghavendra Reviewed-by: Bryan Brattlof Link: https://lore.kernel.org/r/20220802104456.11069-2-rogerq@kernel.org --- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 19 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am642-evm.dts | 4 ++++ arch/arm64/boot/dts/ti/k3-am642-sk.dts | 4 ++++ 3 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 744629cb6725..14238bac71e7 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -1328,4 +1328,23 @@ status = "disabled"; /* Used by OP-TEE */ }; }; + + gpmc0: memory-controller@3b000000 { + compatible = "ti,am64-gpmc"; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 80 0>; + clock-names = "fck"; + reg = <0x00 0x03b000000 0x00 0x400>, + <0x00 0x050000000 0x00 0x8000000>; + reg-names = "cfg", "data"; + interrupts = ; + gpmc,num-cs = <3>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index ad150c704623..eaaedd5e062f 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -676,3 +676,7 @@ pinctrl-0 = <&main_mcan1_pins_default>; phys = <&transceiver2>; }; + +&gpmc0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 2620469a7517..360c177459e6 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -607,3 +607,7 @@ &main_mcan1 { status = "disabled"; }; + +&gpmc0 { + status = "disabled"; +}; -- cgit From c920a6caba68196f48f8ee57cc193e396f941011 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 2 Aug 2022 13:44:56 +0300 Subject: arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node The ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors. 4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm. Signed-off-by: Roger Quadros Signed-off-by: Vignesh Raghavendra Reviewed-by: Bryan Brattlof Link: https://lore.kernel.org/r/20220802104456.11069-3-rogerq@kernel.org --- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 9 +++++++++ arch/arm64/boot/dts/ti/k3-am642-evm.dts | 4 ++++ arch/arm64/boot/dts/ti/k3-am642-sk.dts | 4 ++++ 3 files changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 14238bac71e7..d6aa23681bbe 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -1347,4 +1347,13 @@ gpio-controller; #gpio-cells = <2>; }; + + elm0: ecc@25010000 { + compatible = "ti,am64-elm"; + reg = <0x00 0x25010000 0x00 0x2000>; + interrupts = ; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 54 0>; + clock-names = "fck"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index eaaedd5e062f..5cf913860f80 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -680,3 +680,7 @@ &gpmc0 { status = "disabled"; }; + +&elm0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 360c177459e6..57c3951f14c2 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -611,3 +611,7 @@ &gpmc0 { status = "disabled"; }; + +&elm0 { + status = "disabled"; +}; -- cgit From 6038f1171162faaebbbe3acd1c6712a18a161a41 Mon Sep 17 00:00:00 2001 From: Gowtham Tammana Date: Mon, 22 Aug 2022 18:50:06 -0500 Subject: arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries Add DT entries for main domain watchdog instances. Signed-off-by: Gowtham Tammana Signed-off-by: Vignesh Raghavendra Reviewed-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20220822235006.7081-1-afd%40ti.com --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 16684a2f054d..cf657ac0bd6a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -739,6 +739,24 @@ clock-names = "gpio"; }; + watchdog0: watchdog@2200000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x0 0x2200000 0x0 0x100>; + clocks = <&k3_clks 252 1>; + power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 252 1>; + assigned-clock-parents = <&k3_clks 252 5>; + }; + + watchdog1: watchdog@2210000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x0 0x2210000 0x0 0x100>; + clocks = <&k3_clks 253 1>; + power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 253 1>; + assigned-clock-parents = <&k3_clks 253 5>; + }; + main_r5fss0: r5fss@5c00000 { compatible = "ti,j7200-r5fss"; ti,cluster-mode = <1>; -- cgit From 1ad4669b4bbe6b72784acdb5b24f72b22ad8f1d1 Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Mon, 22 Aug 2022 19:11:33 -0500 Subject: arm64: dts: ti: k3-am65-main: Disable RNG node The hardware random number generator is used by OP-TEE and is access is denied to other users with SoC level bus firewalls. Any access to this device from Linux will result in firewall errors. We could remove this node, but it is still valid device description, and it is possible it could be re-enabled in the bootloader if OP-TEE is not used. So only disable this node for now. Signed-off-by: Andrew Davis Signed-off-by: Vignesh Raghavendra Reviewed-by: Jayesh Choudhary Link: https://lore.kernel.org/r/20220823001136.10944-1-afd@ti.com --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 8919fede3cd7..b3e714e1abed 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -127,6 +127,7 @@ reg = <0x0 0x4e10000 0x0 0x7d>; interrupts = ; clocks = <&k3_clks 136 1>; + status = "disabled"; /* Used by OP-TEE */ }; }; -- cgit From 530eaa573a33fdd86725fdd2b979cbbbc539d47c Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Mon, 22 Aug 2022 19:11:34 -0500 Subject: arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID The first TX and first two RX PSI-L threads for SA2UL are used by SYSFW on High Security(HS) devices. Use the next available threads to prevent resource allocation conflicts. Signed-off-by: Andrew Davis Signed-off-by: Vignesh Raghavendra Reviewed-by: Jayesh Choudhary Link: https://lore.kernel.org/r/20220823001136.10944-2-afd@ti.com --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index b3e714e1abed..165f53bd058b 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -117,8 +117,8 @@ #size-cells = <2>; ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; - dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, - <&main_udmap 0x4001>; + dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>, + <&main_udmap 0x4003>; dma-names = "tx", "rx1", "rx2"; dma-coherent; -- cgit From 49611f43e035f30be685fcf7468f23e85ce2ee06 Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Mon, 22 Aug 2022 19:11:35 -0500 Subject: arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL The SA2UL hardware is also used by SYSFW and OP-TEE. It should be requested using the shared TI-SCI flags instead of the exclusive flags or the request will fail. Signed-off-by: Andrew Davis Signed-off-by: Vignesh Raghavendra Reviewed-by: Jayesh Choudhary Link: https://lore.kernel.org/r/20220823001136.10944-3-afd@ti.com --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 165f53bd058b..4005a73cfea9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -112,7 +112,7 @@ crypto: crypto@4e00000 { compatible = "ti,am654-sa2ul"; reg = <0x0 0x4e00000 0x0 0x1200>; - power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>; + power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; -- cgit From d683a73980a61cc5d8abea7f3f996028e64e9144 Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Mon, 22 Aug 2022 19:11:36 -0500 Subject: arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node J7200 has an instance of SA2UL in the MCU domain. Add DT node for the same. The device is marked TI_SCI_PD_SHARED as parts of this IP are also shared with the security co-processor and OP-TEE. The RNG node is added but marked disabled as it is firewalled off for exclusive use by OP-TEE. Any access to this device from Linux will result in firewall errors. We add the node for completeness of the hardware description. Signed-off-by: Andrew Davis Signed-off-by: Vignesh Raghavendra Reviewed-by: Jayesh Choudhary Link: https://lore.kernel.org/r/20220823001136.10944-4-afd@ti.com --- arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index ff13bbeed30c..e5be78a58682 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -375,4 +375,24 @@ ti,loczrama = <1>; }; }; + + mcu_crypto: crypto@40900000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + power-domains = <&k3_pds 265 TI_SCI_PD_SHARED>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>, + <&mcu_udmap 0x7503>; + dma-names = "tx", "rx1", "rx2"; + dma-coherent; + + rng: rng@40910000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x40910000 0x00 0x7d>; + interrupts = ; + status = "disabled"; /* Used by OP-TEE */ + }; + }; }; -- cgit From b216dc1a41f787620636376bf2be666f08c031d0 Mon Sep 17 00:00:00 2001 From: Aparna M Date: Tue, 30 Aug 2022 18:02:54 +0530 Subject: arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs AM642 SK has 8 leds connected to tpic2810 onboard. Add support for these gpio leds. Signed-off-by: Aparna M Signed-off-by: Vignesh Raghavendra Reviewed-by: Bryan Brattlof Link: https://lore.kernel.org/r/20220830123254.522222-1-vigneshr@ti.com --- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 77 ++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 57c3951f14c2..738d0cf6c40a 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include "k3-am642.dtsi" / { @@ -150,6 +151,74 @@ vin-supply = <&com8_ls_en>; gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&exp2 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&exp2 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&exp2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + gpios = <&exp2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + gpios = <&exp2 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <6>; + gpios = <&exp2 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <7>; + gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <8>; + linux,default-trigger = "heartbeat"; + gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + }; + }; }; &main_pmx0 { @@ -330,6 +399,14 @@ "VPP_LDO_EN", "RPI_PS_3V3_En", "RPI_PS_5V0_En", "RPI_HAT_DETECT"; }; + + exp2: gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8"; + }; }; &main_i2c3 { -- cgit From 0b7baa1a307fcc66f66d7ca34244ee7a3899f92d Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Fri, 2 Sep 2022 08:24:47 +0200 Subject: ARM: dts: lan966x: add led configuration Add led configuration for pcb8291 and pcb8309. Both pcbs have 4 leds which are connected to the sgpio controller. Signed-off-by: Horatiu Vultur Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220902062447.443846-1-horatiu.vultur@microchip.com --- arch/arm/boot/dts/lan966x-pcb8291.dts | 28 ++++++++++++++++++++++++++++ arch/arm/boot/dts/lan966x-pcb8309.dts | 28 ++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 24d9055c4a08..289a31649422 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -23,6 +23,34 @@ gpios = <&gpio 56 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + + led-s0-blue { + label = "s0:blue"; + gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s0-green { + label = "s0:green"; + gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-blue { + label = "s1:blue"; + gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-green { + label = "s1:green"; + gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &gpio { diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts index 05ce27ed5648..cfd7c8933703 100644 --- a/arch/arm/boot/dts/lan966x-pcb8309.dts +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts @@ -42,6 +42,34 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-s0-green { + label = "s0:green"; + gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s0-red { + label = "s0:red"; + gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-green { + label = "s1:green"; + gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-s1-red { + label = "s1:red"; + gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + mux: mux-controller { compatible = "gpio-mux"; #mux-control-cells = <0>; -- cgit From c77543ae7b168eab0686579c7dc9e7bd21298de2 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 29 Aug 2022 22:51:28 +0100 Subject: arm64: dts: renesas: Drop clock-names property from RPC node With 'unevaluatedProperties' support implemented, there are a number of warnings when running dtbs_check: arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: spi@ee200000: Unevaluated properties are not allowed ('clock-names' was unexpected) From schema: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml The main problem is that the DT bindings do not allow clock-names. So just drop the clock-names properties from the SoC DTSI files. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220829215128.5983-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 1 - arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 1 - arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 1 - arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 1 - arch/arm64/boot/dts/renesas/r8a77970.dtsi | 1 - arch/arm64/boot/dts/renesas/r8a77980.dtsi | 1 - arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 1 - 7 files changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index aec62c93f9a3..7e643243c3be 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -2323,7 +2323,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index f62d95760e82..d541b48c7e38 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2191,7 +2191,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index c563d26a7a71..151e32ac0368 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1671,7 +1671,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 3cb3b2e052c1..c5a0e7866b2f 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -2423,7 +2423,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 1df02facb796..ed6e2e47c604 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1045,7 +1045,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index a3af34191ca2..c4ac28a0f716 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1350,7 +1350,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 917>; - clock-names = "rpc"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 917>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 3e1557a5b5e1..8539013f5870 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -2086,7 +2086,6 @@ reg-names = "regs", "dirmap", "wbuf"; interrupts = ; clocks = <&cpg CPG_MOD 629>; - clock-names = "rpc"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 629>; #address-cells = <1>; -- cgit From 33eef075290215989b0c5430d8f696e21af29e0f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Aug 2022 23:49:41 +0000 Subject: arm64: dts: renesas: Add condor-common.dtsi We have V3H Condor board, and will have V3H2 Condor-I board. This patch adds condor-common.dtsi to share the common settings between these boards. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/condor-common.dtsi | 548 ++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 540 +---------------------- 2 files changed, 549 insertions(+), 539 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/condor-common.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi new file mode 100644 index 000000000000..dfbe35bf46e0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor board with R-Car V3H + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ +#include + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &scif0; + ethernet0 = &gether; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + d1_8v: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + d3_3v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + vddq_vin01: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_VIN01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + port@0 { + csi41_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out1>; + }; + }; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander0: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander1: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + bgvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; + + gmsl1: gmsl-deserializer@4a { + compatible = "maxim,max9286"; + reg = <0x4a>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&vddq_vin01>; + mmc-hs200-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&pciec { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pfc { + canfd0_pins: canfd0 { + groups = "canfd0_data_a"; + function = "canfd0"; + }; + + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_b"; + function = "scif_clk"; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 981cf4db0e54..1d326552e2fa 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -8,547 +8,9 @@ /dts-v1/; #include "r8a77980.dtsi" -#include +#include "condor-common.dtsi" / { model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - serial0 = &scif0; - ethernet0 = &gether; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - d1_8v: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "D1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - d3_3v: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <&d3_3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - - vddq_vin01: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "VDDQ_VIN01"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - x1_clk: x1-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <148500000>; - }; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - port@0 { - csi40_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max9286_out0>; - }; - }; - }; -}; - -&csi41 { - status = "okay"; - - ports { - port@0 { - csi41_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max9286_out1>; - }; - }; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&x1_clk>; - clock-names = "du.0", "dclkin.0"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&gether { - pinctrl-0 = <&gether_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii-id"; - phy-handle = <&phy0>; - renesas,no-ether-link; - status = "okay"; - - phy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - }; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - io_expander0: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - io_expander1: gpio@21 { - compatible = "onnn,pca9654"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - avdd-supply = <&d1_8v>; - dvdd-supply = <&d1_8v>; - pvdd-supply = <&d1_8v>; - bgvdd-supply = <&d1_8v>; - dvdd-3v-supply = <&d3_3v>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - gmsl0: gmsl-deserializer@48 { - compatible = "maxim,max9286"; - reg = <0x48>; - - maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; - enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - - port@2 { - reg = <2>; - }; - - port@3 { - reg = <3>; - }; - - port@4 { - reg = <4>; - max9286_out0: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - }; - - i2c-mux { - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - status = "disabled"; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - status = "disabled"; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - status = "disabled"; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - status = "disabled"; - }; - }; - }; - - gmsl1: gmsl-deserializer@4a { - compatible = "maxim,max9286"; - reg = <0x4a>; - - maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; - enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - - port@2 { - reg = <2>; - }; - - port@3 { - reg = <3>; - }; - - port@4 { - reg = <4>; - max9286_out1: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi41_in>; - }; - }; - }; - - i2c-mux { - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - status = "disabled"; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - status = "disabled"; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - status = "disabled"; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - status = "disabled"; - }; - }; - }; -}; - -&lvds0 { - status = "okay"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&mmc0 { - pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&d3_3v>; - vqmmc-supply = <&vddq_vin01>; - mmc-hs200-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - status = "okay"; -}; - -&pciec { - status = "okay"; -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pfc { - canfd0_pins: canfd0 { - groups = "canfd0_data_a"; - function = "canfd0"; - }; - - gether_pins: gether { - groups = "gether_mdio_a", "gether_rgmii", - "gether_txcrefclk", "gether_txcrefclk_mega"; - function = "gether"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - mmc_pins: mmc { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; - power-source = <1800>; - }; - - qspi0_pins: qspi0 { - groups = "qspi0_ctrl", "qspi0_data4"; - function = "qspi0"; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk_b"; - function = "scif_clk"; - }; -}; - -&rpc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fs512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootparam@0 { - reg = <0x00000000 0x040000>; - read-only; - }; - cr7@40000 { - reg = <0x00040000 0x080000>; - read-only; - }; - cert_header_sa3@c0000 { - reg = <0x000c0000 0x080000>; - read-only; - }; - bl2@140000 { - reg = <0x00140000 0x040000>; - read-only; - }; - cert_header_sa6@180000 { - reg = <0x00180000 0x040000>; - read-only; - }; - bl31@1c0000 { - reg = <0x001c0000 0x460000>; - read-only; - }; - uboot@640000 { - reg = <0x00640000 0x0c0000>; - read-only; - }; - uboot-env@700000 { - reg = <0x00700000 0x040000>; - read-only; - }; - dtb@740000 { - reg = <0x00740000 0x080000>; - }; - kernel@7c0000 { - reg = <0x007c0000 0x1400000>; - }; - user@1bc0000 { - reg = <0x01bc0000 0x2440000>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; }; -- cgit From 6f06a74d7d8913288771839e86c3f7f3542768cf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Aug 2022 23:49:52 +0000 Subject: arm64: dts: renesas: Add r8a77980a.dtsi This patch adds r8a77980A V3H2 (= r8a77980 ES2) basic SoC support. It is using r8a77980 (= V3H) setting as-is for now. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87zgfm4nkw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77980a.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a77980a.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77980a.dtsi b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi new file mode 100644 index 000000000000..25b2d27b6167 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car V3H2 (R8A77980A) SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#include "r8a77980.dtsi" + +/ { + compatible = "renesas,r8a77980a", "renesas,r8a77980"; +}; -- cgit From 6f67580ca9edb33a95897d8c0056b961cbd2aeac Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Aug 2022 23:49:59 +0000 Subject: arm64: dts: renesas: Add V3H2 Condor-I board support This patch adds r8a77980A V3H2 (= r8a77980 ES2) Condor-I board basic support. Signed-off-by: Andrey Dolnikov Signed-off-by: Valentine Barshak Signed-off-by: Koji Matsuoka Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87y1v64nko.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 1 + arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts | 15 +++++++++++++++ 2 files changed, 16 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 7a647860ef35..0699b51c1247 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb +dtb-$(CONFIG_ARCH_R8A77980) += r8a77980a-condor-i.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts new file mode 100644 index 000000000000..9f488dea0f34 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor-I board on r8a77980A (ES2.0) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77980a.dtsi" +#include "condor-common.dtsi" + +/ { + model = "Renesas Condor-I board based on r8a77980A (ES2.0)"; + compatible = "renesas,condor-i", "renesas,r8a77980a", "renesas,r8a77980"; +}; -- cgit From 49e93898f0dc177e645c22d0664813567fd9ec00 Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Wed, 27 Jul 2022 14:56:10 +0200 Subject: ARM: dts: turris-omnia: Fix mpp26 pin name and comment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a bug in Turris Omnia's schematics, whereupon the MPP[26] pin, which is routed to CN11 pin header, is documented as SPI CS1, but MPP[26] pin does not support this function. Instead it controls chip select 2 if in "spi0" mode. Fix the name of the pin node in pinctrl node and fix the comment in SPI node. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index d1e0db6e5730..a41902e3815c 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -476,7 +476,7 @@ marvell,function = "spi0"; }; - spi0cs1_pins: spi0cs1-pins { + spi0cs2_pins: spi0cs2-pins { marvell,pins = "mpp26"; marvell,function = "spi0"; }; @@ -511,7 +511,7 @@ }; }; - /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ + /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */ }; &uart0 { -- cgit From 31be791e26cf928695dba1477d62bbf55854931f Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Wed, 3 Aug 2022 13:16:23 +1200 Subject: arm64: dts: marvell: Add UART1-3 for AC5/AC5X The AC5/AC5X SoC has 4 UART blocks. Add the additional UART1-3 blocks to the base dtsi file. Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 30 +++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 80b44c7df56a..914fcf9e2c24 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -95,6 +95,36 @@ status = "okay"; }; + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x11000 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = ; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + mdio: mdio@22004 { #address-cells = <1>; #size-cells = <0>; -- cgit From 54d8a6b7f0e858ee5acc05a6ed0ac78ed0d562f1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Aug 2022 14:11:22 +0300 Subject: ARM: dts: armada-xp: align SPI node name with dtschema The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 87dcb502f72d..0dad95ea26c2 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -164,7 +164,7 @@ }; }; - spi3 { + spi-3 { compatible = "spi-gpio"; status = "okay"; gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>; -- cgit From 04eabc6ac10fda9424606d9a7ab6ab9a5d95350a Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 16 Aug 2022 02:10:24 +0200 Subject: ARM: dts: kirkwood: lsxl: fix serial line Commit 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") unknowingly broke the serial output on this board. Before this commit, the pinmux was still configured by the bootloader and the kernel didn't reconfigured it again. This was an oversight by the initial board support where the pinmux for the serial line was never configured by the kernel. But with this commit, the serial line will be reconfigured to the wrong pins. This is especially confusing, because the output still works, but the input doesn't. Presumingly, the input is reconfigured to MPP10, but the output is connected to both MPP11 and MPP5. Override the pinmux in the board device tree. Fixes: 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") Signed-off-by: Michael Walle Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 7b151acb9984..321a40a98ed2 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -10,6 +10,11 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { + /* Non-default UART pins */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp4", "mpp5"; + }; + pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; -- cgit From 2d528eda7c96ce5c70f895854ecd5684bd5d80b9 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 16 Aug 2022 02:10:25 +0200 Subject: ARM: dts: kirkwood: lsxl: remove first ethernet port Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet port. This has always been wrong, i.e. the board code used to set up both ports, but the driver will play nice and return -ENODEV if the assiciated PHY is not found. Nevertheless, it is wrong. Remove it. Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes") Signed-off-by: Michael Walle Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 321a40a98ed2..88b70ba1c8fe 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -218,22 +218,11 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - ethphy1: ethernet-phy@8 { reg = <8>; }; }; -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - ð1 { status = "okay"; ethernet1-port@0 { -- cgit From 217dc618d5e87ac16389ecd6ab12ad54c0e5afde Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:40:59 +0200 Subject: ARM: dts: kirkwood: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-6192.dtsi | 14 ++++++++++++-- arch/arm/boot/dts/kirkwood-6281.dtsi | 14 ++++++++++++-- arch/arm/boot/dts/kirkwood-6282.dtsi | 28 ++++++++++++++++++++++++---- arch/arm/boot/dts/kirkwood-98dx4122.dtsi | 14 ++++++++++++-- 4 files changed, 60 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 396bcba08adb..07f4f7f98c0c 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -26,12 +26,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx"; + interrupts = <9>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index faa05849a40d..d08a9a5ecc26 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -26,12 +26,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx"; + interrupts = <9>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index e84c54b77dea..2eea5b304f47 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -30,12 +30,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx"; + interrupts = <9>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie1: pcie@2,0 { @@ -48,12 +58,22 @@ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 10>; + interrupt-names = "intx"; + interrupts = <10>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gate_clk 18>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 299c147298c3..070bc13242b8 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -26,12 +26,22 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; + interrupt-names = "intx"; + interrupts = <9>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; -- cgit From 5a203517db415045bf93d230bc19af52656c3692 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:00 +0200 Subject: ARM: dts: dove: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/dove.dtsi | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 89e0bdaf3a85..96ba47c061a7 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -122,8 +122,18 @@ bus-range = <0x00 0xff>; #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 16>; + interrupt-names = "intx"; + interrupts = <16>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie1: pcie@2 { @@ -141,8 +151,18 @@ bus-range = <0x00 0xff>; #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 18>; + interrupt-names = "intx"; + interrupts = <18>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From 09cec023217663f01e8340da6e350c7851b2a76f Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:01 +0200 Subject: ARM: dts: armada-370.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370.dtsi | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 46e6d3ed8f35..9dc928859ad3 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -60,16 +60,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -78,16 +88,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From 9271e56b033b8cc2108fe92dc47491ebd6526284 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:02 +0200 Subject: ARM: dts: armada-xp-98dx3236.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 38a052a0312d..b21ffb819b1d 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -76,16 +76,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From b4371d2978c2090c4f196b5bcdca1dec437d25eb Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:03 +0200 Subject: ARM: dts: armada-xp-mv78230.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 70 +++++++++++++++++++++++++++----- 1 file changed, 60 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 8558bf6bb54c..bf9360f41e0a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -83,16 +83,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -101,16 +111,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie3: pcie@3,0 { @@ -119,16 +139,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie4: pcie@4,0 { @@ -137,16 +167,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie5: pcie@5,0 { @@ -155,16 +195,26 @@ reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From 2561806f3cd850ab2573f977408991263b2c4e11 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:04 +0200 Subject: ARM: dts: armada-xp-mv78260.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 126 ++++++++++++++++++++++++++----- 1 file changed, 108 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d85fe8ac327..0714af52e607 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -98,16 +98,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -116,16 +126,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie3: pcie@3,0 { @@ -134,16 +154,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie4: pcie@4,0 { @@ -152,16 +182,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie5: pcie@5,0 { @@ -170,16 +210,26 @@ reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie6: pcie@6,0 { @@ -188,16 +238,26 @@ reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 63>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie6_intc 0>, + <0 0 0 2 &pcie6_intc 1>, + <0 0 0 3 &pcie6_intc 2>, + <0 0 0 4 &pcie6_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; status = "disabled"; + + pcie6_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie7: pcie@7,0 { @@ -206,16 +266,26 @@ reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 64>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie7_intc 0>, + <0 0 0 2 &pcie7_intc 1>, + <0 0 0 3 &pcie7_intc 2>, + <0 0 0 4 &pcie7_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; status = "disabled"; + + pcie7_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie8: pcie@8,0 { @@ -224,16 +294,26 @@ reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 65>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie8_intc 0>, + <0 0 0 2 &pcie8_intc 1>, + <0 0 0 3 &pcie8_intc 2>, + <0 0 0 4 &pcie8_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; status = "disabled"; + + pcie8_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie9: pcie@9,0 { @@ -242,16 +322,26 @@ reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 99>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie9_intc 0>, + <0 0 0 2 &pcie9_intc 1>, + <0 0 0 3 &pcie9_intc 2>, + <0 0 0 4 &pcie9_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; status = "disabled"; + + pcie9_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From 1ba90924c37004006c03942514faf1bc6f80aed7 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:05 +0200 Subject: ARM: dts: armada-xp-mv78460.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 140 ++++++++++++++++++++++++++----- 1 file changed, 120 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 230a3fd36b30..16185edf9aa5 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -119,16 +119,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie2: pcie@2,0 { @@ -137,16 +147,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie3: pcie@3,0 { @@ -155,16 +175,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; clocks = <&gateclk 7>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie4: pcie@4,0 { @@ -173,16 +203,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; clocks = <&gateclk 8>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie5: pcie@5,0 { @@ -191,16 +231,26 @@ reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 9>; status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie6: pcie@6,0 { @@ -209,16 +259,26 @@ reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 63>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie6_intc 0>, + <0 0 0 2 &pcie6_intc 1>, + <0 0 0 3 &pcie6_intc 2>, + <0 0 0 4 &pcie6_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <1>; clocks = <&gateclk 10>; status = "disabled"; + + pcie6_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie7: pcie@7,0 { @@ -227,16 +287,26 @@ reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 64>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie7_intc 0>, + <0 0 0 2 &pcie7_intc 1>, + <0 0 0 3 &pcie7_intc 2>, + <0 0 0 4 &pcie7_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <2>; clocks = <&gateclk 11>; status = "disabled"; + + pcie7_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie8: pcie@8,0 { @@ -245,16 +315,26 @@ reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 65>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie8_intc 0>, + <0 0 0 2 &pcie8_intc 1>, + <0 0 0 3 &pcie8_intc 2>, + <0 0 0 4 &pcie8_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <3>; clocks = <&gateclk 12>; status = "disabled"; + + pcie8_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie9: pcie@9,0 { @@ -263,16 +343,26 @@ reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 99>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie9_intc 0>, + <0 0 0 2 &pcie9_intc 1>, + <0 0 0 3 &pcie9_intc 2>, + <0 0 0 4 &pcie9_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 26>; status = "disabled"; + + pcie9_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie10: pcie@a,0 { @@ -281,16 +371,26 @@ reg = <0x5000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 103>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 0x81000000 0 0 0x81000000 0xa 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie10_intc 0>, + <0 0 0 2 &pcie10_intc 1>, + <0 0 0 3 &pcie10_intc 2>, + <0 0 0 4 &pcie10_intc 3>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 27>; status = "disabled"; + + pcie10_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From 2fa6afbaafda29c514f898e353fce05260b925f1 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:06 +0200 Subject: ARM: dts: armada-375.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-375.dtsi | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 7f2f24a29e6c..929deaf312a5 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -568,16 +568,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; pcie1: pcie@2,0 { @@ -586,16 +596,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From 5568352e716b7a41101e37c5f8465bf131af18f6 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:07 +0200 Subject: ARM: dts: armada-380.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-380.dtsi | 42 +++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index cff1269f3fbf..ce1dddb2269b 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -64,16 +64,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -83,16 +93,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -102,16 +122,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; }; -- cgit From 89074c2d28117909616e3349e4b9657541270472 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 12 Jul 2022 18:41:08 +0200 Subject: ARM: dts: armada-39x.dtsi: Add definitions for PCIe legacy INTx interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-39x.dtsi | 56 +++++++++++++++++++++++++++++++++------ 1 file changed, 48 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index e0b7c2099831..923b035a3ab3 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -438,16 +438,26 @@ reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -457,16 +467,26 @@ reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* x1 port */ @@ -476,16 +496,26 @@ reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; /* @@ -498,16 +528,26 @@ reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 7>; status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; -- cgit From b332ce1b7acb7a6777096ad3aa33b7178dd504a6 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Thu, 18 Aug 2022 01:00:35 +0200 Subject: ARM: dts: kirkwood: Add definitions for PCIe error interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit First PCIe controller on Kirkwood SoC reports error interrupt via IRQ 44 and second PCIe controller via IRQ 45. Signed-off-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-6192.dtsi | 4 ++-- arch/arm/boot/dts/kirkwood-6281.dtsi | 4 ++-- arch/arm/boot/dts/kirkwood-6282.dtsi | 8 ++++---- arch/arm/boot/dts/kirkwood-98dx4122.dtsi | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 07f4f7f98c0c..705c0d7effed 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -26,8 +26,8 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-names = "intx"; - interrupts = <9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index d08a9a5ecc26..8e311165fd13 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -26,8 +26,8 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-names = "intx"; - interrupts = <9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 2eea5b304f47..e33723160ce7 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -30,8 +30,8 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-names = "intx"; - interrupts = <9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie0_intc 0>, <0 0 0 2 &pcie0_intc 1>, @@ -58,8 +58,8 @@ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; bus-range = <0x00 0xff>; - interrupt-names = "intx"; - interrupts = <10>; + interrupt-names = "intx", "error"; + interrupts = <10>, <45>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie1_intc 0>, <0 0 0 2 &pcie1_intc 1>, diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 070bc13242b8..c3469a2fc58a 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -26,8 +26,8 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; - interrupt-names = "intx"; - interrupts = <9>; + interrupt-names = "intx", "error"; + interrupts = <9>, <44>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, -- cgit From 39319cac50a28ea8801710148024186472d2cf08 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Thu, 18 Aug 2022 01:00:36 +0200 Subject: ARM: dts: dove: Add definitions for PCIe error interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit First PCIe controller on Dove SoC reports error interrupt via IRQ 15 and second PCIe controller via IRQ 17. Signed-off-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/dove.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 96ba47c061a7..00a36fba2fd2 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -122,8 +122,8 @@ bus-range = <0x00 0xff>; #interrupt-cells = <1>; - interrupt-names = "intx"; - interrupts = <16>; + interrupt-names = "intx", "error"; + interrupts = <16>, <15>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie0_intc 0>, <0 0 0 2 &pcie0_intc 1>, @@ -151,8 +151,8 @@ bus-range = <0x00 0xff>; #interrupt-cells = <1>; - interrupt-names = "intx"; - interrupts = <18>; + interrupt-names = "intx", "error"; + interrupts = <18>, <17>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie1_intc 0>, <0 0 0 2 &pcie1_intc 1>, -- cgit From 172f5fbd25a1710d23b9c066fdc23def338f5dc2 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:21 +0200 Subject: arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatible Espressobin Ultra is part of the Espressobin family and shares the basic design, so add the generic "globalscale,espressobin" compatible to it as well. Signed-off-by: Robert Marko Acked-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index 070725b81be5..1b2ed63ae6a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -12,8 +12,8 @@ / { model = "Globalscale Marvell ESPRESSOBin Ultra Board"; - compatible = "globalscale,espressobin-ultra", "marvell,armada3720", - "marvell,armada3710"; + compatible = "globalscale,espressobin-ultra", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; aliases { /* ethernet1 is WAN port */ -- cgit From 380c94660642c11e968cb66be47a336e9829d018 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:22 +0200 Subject: arm64: dts: marvell: uDPU: add missing SoC compatible According to the bindings, all boards using Armada 37xx SoC-s must have "marvell,armada3710" compatible while 3720 based ones should also have "marvell,armada3720" before it. Signed-off-by: Robert Marko Acked-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index b20c8e7d923b..3777883d69f6 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -16,7 +16,7 @@ / { model = "Methode uDPU Board"; - compatible = "methode,udpu", "marvell,armada3720"; + compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; chosen { stdout-path = "serial0:115200n8"; -- cgit From f035bbde57ad467285f89754a990a1067a0ecc36 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:23 +0200 Subject: arm64: dts: marvell: uDPU: align LED-s with bindings According to bindings they LED-s should be prefixed with "led" in this use case, so fix accordingly. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index 3777883d69f6..13e5ca379755 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -31,32 +31,32 @@ pinctrl-names = "default"; compatible = "gpio-leds"; - power1 { + led-power1 { label = "udpu:green:power"; gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; }; - power2 { + led-power2 { label = "udpu:red:power"; gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; }; - network1 { + led-network1 { label = "udpu:green:network"; gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; }; - network2 { + led-network2 { label = "udpu:red:network"; gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; }; - alarm1 { + led-alarm1 { label = "udpu:green:alarm"; gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; }; - alarm2 { + led-alarm2 { label = "udpu:red:alarm"; gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; }; -- cgit From c269d4207c85acafb0216427d1f3f7af61f00353 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:24 +0200 Subject: arm64: dts: marvell: uDPU: remove LED node pinctrl-names Using pinctrl-names requires the appropriate pinctrl-0 property, otherwise it is not utilized at all. Since its not required, just remove it. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index 13e5ca379755..50d9b0f48f99 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -28,7 +28,6 @@ }; leds { - pinctrl-names = "default"; compatible = "gpio-leds"; led-power1 { -- cgit From 565a6cf07d786598cfa52d91630d70f4ffc2a9e5 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:25 +0200 Subject: arm64: dts: marvell: rename temp sensor nodes Rename the temperature sensor nodes to use "temp-sensor" which matches their device class instead of IC specific naming. Remove the status = "okay" which is not required as its default anyway. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index 50d9b0f48f99..b2d7f24fa940 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -152,14 +152,12 @@ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - nct375@48 { - status = "okay"; + temp-sensor@48 { compatible = "ti,tmp75c"; reg = <0x48>; }; - nct375@49 { - status = "okay"; + temp-sensor@49 { compatible = "ti,tmp75c"; reg = <0x49>; }; -- cgit From 467b43a944b3c7810b600a0adc409be74ee1b8d0 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Wed, 27 Jul 2022 15:16:19 +0200 Subject: ARM: dts: armada-38x: Add gpio-ranges for pin muxing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GPIOs are configured by pinmux driver, so add corresponding references. Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs") Signed-off-by: Pali Rohár Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-38x.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index df3c8d1d8f64..a40a70e70458 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -298,6 +298,7 @@ reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; #pwm-cells = <2>; interrupt-controller; @@ -316,6 +317,7 @@ reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; + gpio-ranges = <&pinctrl 0 32 28>; #gpio-cells = <2>; #pwm-cells = <2>; interrupt-controller; -- cgit From ff5d694b03407c539895cd877f86512942a08307 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:26 +0200 Subject: arm64: dts: marvell: split Methode uDPU DTS Split the Methode uDPU DTS into a common DTSI as preparation for adding support for Methode eDPU which is based on the uDPU to avoid duplication. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 150 +------------------- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi | 160 ++++++++++++++++++++++ 2 files changed, 161 insertions(+), 149 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index b2d7f24fa940..c76eceabd33e 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -1,66 +1,13 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid - */ /dts-v1/; -#include -#include "armada-372x.dtsi" +#include "armada-3720-uDPU.dtsi" / { model = "Methode uDPU Board"; compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - leds { - compatible = "gpio-leds"; - - led-power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - led-power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - led-network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - led-network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - led-alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - led-alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; - sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; i2c-bus = <&i2c0>; @@ -70,55 +17,6 @@ tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x180000>; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x10000>; - }; - }; - }; }; &pinctrl_nb { @@ -126,11 +24,6 @@ groups = "i2c1"; function = "gpio"; }; - - i2c2_recovery_pins: i2c2-recovery-pins { - groups = "i2c2"; - function = "gpio"; - }; }; &i2c0 { @@ -143,48 +36,7 @@ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; -&i2c1 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - temp-sensor@48 { - compatible = "ti,tmp75c"; - reg = <0x48>; - }; - - temp-sensor@49 { - compatible = "ti,tmp75c"; - reg = <0x49>; - }; -}; - ð0 { phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi new file mode 100644 index 000000000000..3f79923376fb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid + */ + +/dts-v1/; + +#include +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + led-power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led-network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + led-network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + led-alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + led-alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + +&pinctrl_nb { + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + temp-sensor@48 { + compatible = "ti,tmp75c"; + reg = <0x48>; + }; + + temp-sensor@49 { + compatible = "ti,tmp75c"; + reg = <0x49>; + }; +}; + +ð0 { + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; +}; -- cgit From 1a9f9785a9abe3f55e874a47cb0c483c99b55e83 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 16 May 2022 14:48:28 +0200 Subject: arm64: dts: marvell: add support for Methode eDPU Methode eDPU is an Armada 3720 powered board based on the Methode uDPU. They feature the same CPU, RAM, and storage as well as the form factor. However, eDPU only has one SFP slot plus a copper G.hn port. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/Makefile | 1 + arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++ 2 files changed, 15 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index b6d493e34dc5..058237681fe5 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts new file mode 100644 index 000000000000..57fc698e55d0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "armada-3720-uDPU.dtsi" + +/ { + model = "Methode eDPU Board"; + compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; +}; + +ð0 { + phy-mode = "2500base-x"; +}; -- cgit From 2b14d382ec97ca5b420239ee6e16da390fab476c Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Thu, 1 Sep 2022 14:28:08 +1200 Subject: arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios Use the correct names for scl-gpios and sda-gpios so that the generic i2c recovery code will find them. While we're here set the GPIO_OPEN_DRAIN flag on the gpios. Fixes: b795fadfc46b ("arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board") Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 914fcf9e2c24..44ed6f963b75 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -147,8 +147,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c0_pins>; pinctrl-1 = <&i2c0_gpio>; - scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -166,8 +166,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c1_pins>; pinctrl-1 = <&i2c1_gpio>; - scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; -- cgit From efa80587f29f12cd3198651aa9772d68497ff5c7 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 19 Aug 2022 11:43:54 +0200 Subject: ARM: dts: vf610: ddr pinmux Add DDR pinmux which may be used in U-Boot after synchronising all them device trees (and includes) from Linux. Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-pinfunc.h | 50 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h index 8bb970b0dff8..b7b7322a2d1b 100644 --- a/arch/arm/boot/dts/vf610-pinfunc.h +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -802,5 +802,55 @@ #define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0 #define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0 #define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1 +#define VF610_PAD_DDR_RESETB 0x21c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A15__DDR_A_15 0x220 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A14__DDR_A_14 0x224 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A13__DDR_A_13 0x228 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A12__DDR_A_12 0x22c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A11__DDR_A_11 0x230 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A10__DDR_A_10 0x234 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A9__DDR_A_9 0x238 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A8__DDR_A_8 0x23c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A7__DDR_A_7 0x240 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A6__DDR_A_6 0x244 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A5__DDR_A_5 0x248 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A4__DDR_A_4 0x24c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A3__DDR_A_3 0x250 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A2__DDR_A_2 0x254 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A1__DDR_A_1 0x258 0x000 ALT0 0x0 +#define VF610_PAD_DDR_A0__DDR_A_0 0x25c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_BA2__DDR_BA_2 0x260 0x000 ALT0 0x0 +#define VF610_PAD_DDR_BA1__DDR_BA_1 0x264 0x000 ALT0 0x0 +#define VF610_PAD_DDR_BA0__DDR_BA_0 0x268 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CAS__DDR_CAS_B 0x26c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CKE__DDR_CKE_0 0x270 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CLK__DDR_CLK_0 0x274 0x000 ALT0 0x0 +#define VF610_PAD_DDR_CS__DDR_CS_B_0 0x278 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D15__DDR_D_15 0x27c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D14__DDR_D_14 0x280 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D13__DDR_D_13 0x284 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D12__DDR_D_12 0x288 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D11__DDR_D_11 0x28c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D10__DDR_D_10 0x290 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D9__DDR_D_9 0x294 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D8__DDR_D_8 0x298 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D7__DDR_D_7 0x29c 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D6__DDR_D_6 0x2a0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D5__DDR_D_5 0x2a4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D4__DDR_D_4 0x2a8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D3__DDR_D_3 0x2ac 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D2__DDR_D_2 0x2b0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D1__DDR_D_1 0x2b4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_D0__DDR_D_0 0x2b8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQM1__DDR_DQM_1 0x2bc 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQM0__DDR_DQM_0 0x2c0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQS1__DDR_DQS_1 0x2c4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DQS0__DDR_DQS_0 0x2c8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_RAS__DDR_RAS_B 0x2cc 0x000 ALT0 0x0 +#define VF610_PAD_DDR_WE__DDR_WE_B 0x2d0 0x000 ALT0 0x0 +#define VF610_PAD_DDR_ODT1__DDR_ODT_0 0x2d4 0x000 ALT0 0x0 +#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x2d8 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x2dc 0x000 ALT0 0x0 +#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x2e0 0x000 ALT0 0x0 #endif -- cgit From 0d7d8861029a98d25c076092ffee3d7f00cbe5f9 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 23 Aug 2022 11:02:09 +0800 Subject: ARM: dts: imx7ulp: update the LPI2C clock-names The clock name should be per clock, not ipg clock. Reviewed-by: Dong Aisheng Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7ulp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index bcec98b96411..9c7abec90a89 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -329,7 +329,7 @@ reg = <0x40a40000 0x10000>; interrupts = ; clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; - clock-names = "ipg"; + clock-names = "per"; assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; assigned-clock-rates = <48000000>; @@ -341,7 +341,7 @@ reg = <0x40a50000 0x10000>; interrupts = ; clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; - clock-names = "ipg"; + clock-names = "per"; assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; assigned-clock-rates = <48000000>; -- cgit From 6497c72e5cc43e04399c0c25150f5278fa44ce0f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 23 Aug 2022 11:02:14 +0800 Subject: ARM: dts: imx7ulp: Add IPG clock for lpi2c LPI2C requires two clocks, add the missed IPG clock. Reviewed-by: Dong Aisheng Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7ulp.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 9c7abec90a89..7f7d2d5122fb 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -328,8 +328,9 @@ compatible = "fsl,imx7ulp-lpi2c"; reg = <0x40a40000 0x10000>; interrupts = ; - clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; - clock-names = "per"; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; assigned-clock-rates = <48000000>; @@ -340,8 +341,9 @@ compatible = "fsl,imx7ulp-lpi2c"; reg = <0x40a50000 0x10000>; interrupts = ; - clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; - clock-names = "per"; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; assigned-clock-rates = <48000000>; -- cgit From faedfa5b40f095d09040c3a040e2f8dee4a36b4b Mon Sep 17 00:00:00 2001 From: Frank Wunderlich Date: Thu, 25 Aug 2022 21:38:35 +0200 Subject: arm64: dts: rockchip: Add PCIe v3 nodes to rk3568 Add nodes to rk356x devicetree to support PCIe v3. Signed-off-by: Peter Geis Signed-off-by: Frank Wunderlich Link: https://lore.kernel.org/r/20220825193836.54262-5-linux@fw-web.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index 2bdf8c7e9765..ba67b58f05b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -42,6 +42,128 @@ reg = <0x0 0xfe190200 0x0 0x20>; }; + pcie30_phy_grf: syscon@fdcb8000 { + compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon"; + reg = <0x0 0xfdcb8000 0x0 0x10000>; + }; + + pcie30phy: phy@fe8c0000 { + compatible = "rockchip,rk3568-pcie3-phy"; + reg = <0x0 0xfe8c0000 0x0 0x20000>; + #phy-cells = <0>; + clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, + <&cru PCLK_PCIE30PHY>; + clock-names = "refclk_m", "refclk_n", "pclk"; + resets = <&cru SRST_PCIE30PHY>; + reset-names = "phy"; + rockchip,phy-grf = <&pcie30_phy_grf>; + status = "disabled"; + }; + + pcie3x1: pcie@fe270000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>, + <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>, + <&cru CLK_PCIE30X1_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x1_intc 0>, + <0 0 0 2 &pcie3x1_intc 1>, + <0 0 0 3 &pcie3x1_intc 2>, + <0 0 0 4 &pcie3x1_intc 3>; + linux,pci-domain = <1>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <3>; + msi-map = <0x0 &gic 0x1000 0x1000>; + num-lanes = <1>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0400000 0x0 0x00400000>, + <0x0 0xfe270000 0x0 0x00010000>, + <0x3 0x7f000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>, + <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE30X1_POWERUP>; + reset-names = "pipe"; + /* bifurcation; lane1 when using 1+1 */ + status = "disabled"; + + pcie3x1_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + + pcie3x2: pcie@fe280000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, + <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, + <&cru CLK_PCIE30X2_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, + <0 0 0 2 &pcie3x2_intc 1>, + <0 0 0 3 &pcie3x2_intc 2>, + <0 0 0 4 &pcie3x2_intc 3>; + linux,pci-domain = <2>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <3>; + msi-map = <0x0 &gic 0x2000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0800000 0x0 0x00400000>, + <0x0 0xfe280000 0x0 0x00010000>, + <0x3 0xbf000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>, + <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE30X2_POWERUP>; + reset-names = "pipe"; + /* bifurcation; lane0 when using 1+1 */ + status = "disabled"; + + pcie3x2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + gmac0: ethernet@fe2a0000 { compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe2a0000 0x0 0x10000>; -- cgit From 86973ae0355bc302d5e4c10fa382f6801feb4b90 Mon Sep 17 00:00:00 2001 From: Frank Wunderlich Date: Thu, 25 Aug 2022 21:38:36 +0200 Subject: arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and set PCIe related regulators to always on. Suggested-by: Peter Geis Signed-off-by: Frank Wunderlich Link: https://lore.kernel.org/r/20220825193836.54262-6-linux@fw-web.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 5e34bd0b214d..7a8d55a898f5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -86,6 +86,66 @@ vin-supply = <&dc_12v>; }; + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* pi6c pcie clock generator feeds both ports */ + vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <200000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ + vcc3v3_minipcie: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_minipcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_enable_h>; + startup-delay-us = <50000>; + vin-supply = <&vcc3v3_pi6c_05>; + }; + + /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ + vcc3v3_ngff: vcc3v3-ngff-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ngff"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ngffpcie_enable_h>; + startup-delay-us = <50000>; + vin-supply = <&vcc3v3_pi6c_05>; + }; + vcc5v0_usb: vcc5v0_usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; @@ -513,6 +573,32 @@ }; }; +&pcie30phy { + data-lanes = <1 2>; + phy-supply = <&vcc3v3_pi6c_05>; + status = "okay"; +}; + +&pcie3x1 { + /* M.2 slot */ + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&ngffpcie_reset_h>; + reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_ngff>; + status = "okay"; +}; + +&pcie3x2 { + /* mPCIe slot */ + num-lanes = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_reset_h>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_minipcie>; + status = "okay"; +}; + &pinctrl { leds { blue_led_pin: blue-led-pin { @@ -529,6 +615,24 @@ }; }; + pcie { + minipcie_enable_h: minipcie-enable-h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + + ngffpcie_enable_h: ngffpcie-enable-h { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + + minipcie_reset_h: minipcie-reset-h { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + + ngffpcie_reset_h: ngffpcie-reset-h { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -708,6 +812,19 @@ status = "okay"; }; +&usb2phy1 { + /* USB for PCIe/M2 */ + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; -- cgit From b6c228401b2565b7bd59ad7418074145cdaa316a Mon Sep 17 00:00:00 2001 From: Michael Riesch Date: Wed, 20 Jul 2022 11:15:27 +0200 Subject: arm64: dts: rockchip: add csi dphy node to rk356x Add the MIPI CSI DPHY node to the RK356x device tree. Signed-off-by: Michael Riesch Link: https://lore.kernel.org/r/20220720091527.1270365-4-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 319981c3e9f7..c66b60302803 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -1594,6 +1594,18 @@ status = "disabled"; }; + csi_dphy: phy@fe870000 { + compatible = "rockchip,rk3568-csi-dphy"; + reg = <0x0 0xfe870000 0x0 0x10000>; + clocks = <&cru PCLK_MIPICSIPHY>; + clock-names = "pclk"; + #phy-cells = <0>; + resets = <&cru SRST_P_MIPICSIPHY>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + usb2phy0: usb2phy@fe8a0000 { compatible = "rockchip,rk3568-usb2phy"; reg = <0x0 0xfe8a0000 0x0 0x10000>; -- cgit From 904f983256fdd24bde974bf2f38fbacd3edbcd80 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Sat, 9 Jul 2022 18:30:16 +0800 Subject: arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610 EAIDK-610 is from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply This patch is test on Armbain and Glodroid with HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT. Signed-off-by: Andy Yan Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts | 939 ++++++++++++++++++++++ 2 files changed, 940 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ef79a672804a..4ed7d483c864 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts new file mode 100644 index 000000000000..d1f343345f67 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts @@ -0,0 +1,939 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include +#include +#include +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "OPEN AI LAB EAIDK-610"; + compatible = "openailab,eaidk-610", "rockchip,rk3399"; + + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + key-power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>, <&user_led_pin>, + <&heartbeat_led_pin>, <&wlan_active_led_pin>, + <&bt_active_led_pin>; + + work_led: led-0 { + label = "blue:work"; + default-state = "on"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + + user_led: led-1 { + label = "read:user"; + default-state = "off"; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + }; + + heartbeat_led: led-2 { + label = "green:heartbeat"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; + + wlan_active_led: led-3 { + label = "yellow:wlan"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led: led-4 { + label = "blue:bt"; + gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + rt5651-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "realtek,rt5651-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Mic Jack", "MICBIAS1", + "IN1P", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + simple-audio-card,codec { + sound-dai = <&rt5651>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + /* For USB3.0 Port1/2 */ + vcc5v0_host1: vcc5v0-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host1_en>; + regulator-name = "vcc5v0_host1"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + /* For USB2.0 Port1/2 */ + vcc5v0_host3: vcc5v0-host3-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host3_en>; + regulator-name = "vcc5v0_host3"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc3v3_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_pin>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_pin>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + rt5651: audio-codec@1a { + compatible = "rockchip,rt5651"; + reg = <0x1a>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_role_sw: endpoint@0 { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + }; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_pin: work-led-pin { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led_pin: user-led-pin { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + heartbeat_led_pin: heartbeat-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_active_led_pin: wlan-led-pin { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_active_led_pin: bt-led-pin { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + rt5651 { + rt5651_hpcon: rt5640-hpcon { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host3_en: vcc5v0-host3-en { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host1_en: vcc5v0-host1-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + /* WiFi & BT combo module AMPAK AP6255 */ + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy0_usb3 { + orientation-switch; + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host3>; + status = "okay"; + }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host3>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; -- cgit From 78a21c7d59520e72ebea667fe8745a4371d9fe86 Mon Sep 17 00:00:00 2001 From: Martijn Braam Date: Mon, 29 Aug 2022 15:00:40 +1000 Subject: arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a basic DT containing regulators and UART, intended to be a base that myself and others can add additional nodes in future patches. Tested to work: booting from eMMC/SD, output over UART. https://wiki.pine64.org/wiki/PinePhone_Pro This is derived from the community pine64-org repo[0] with fixes from https://megous.com/git/linux. 0. https://gitlab.com/pine64-org/linux/-/commit/261d3b5f8ac503f97da810986d1d6422430c8531 Signed-off-by: Martijn Braam Co-developed-by: Kamil Trzciński [no SoB, but Kamil is happy for this patch to be submitted] Co-developed-by: Ondrej Jirman Signed-off-by: Ondrej Jirman Co-developed-by: Tom Fitzhenry Signed-off-by: Tom Fitzhenry Reviewed-by: Caleb Connolly Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Link: https://lore.kernel.org/r/20220829050040.17330-2-tom@tom-fitzhenry.me.uk Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-pinephone-pro.dts | 398 +++++++++++++++++++++ 2 files changed, 399 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 4ed7d483c864..236e8ae52c70 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts new file mode 100644 index 000000000000..f00c80361377 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Martijn Braam + * Copyright (c) 2021 Kamil Trzciński + */ + +/* + * PinePhone Pro datasheet: + * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf + */ + +/dts-v1/; +#include +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 PinePhonePro"; + compatible = "pine64,pinephone-pro", "rockchip,rk3399"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn_pin>; + + key-power { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = ; + wakeup-source; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcca1v8_s3: vcc1v8-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca1v8_s3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc1v8_codec: vcc1v8-codec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc1v8_codec_en>; + regulator-name = "vcc1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_cpu_l: DCDC_REG1 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_center: DCDC_REG2 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcca3v0_codec: LDO_REG1 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vcca1v8_codec: LDO_REG3 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + rk818_pwr_on: LDO_REG4 { + regulator-name = "rk818_pwr_on"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: LDO_REG5 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG7 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3_s3: LDO_REG8 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG9 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3150000>; + }; + + vcc3v3_s0: SWITCH_REG { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_pin>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_pin>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&cluster0_opp { + opp04 { + status = "disabled"; + }; + + opp05 { + status = "disabled"; + }; +}; + +&cluster1_opp { + opp06 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1100000 1100000 1150000>; + }; + + opp07 { + status = "disabled"; + }; +}; + +&io_domains { + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn_pin: pwrbtn-pin { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sound { + vcc1v8_codec_en: vcc1v8-codec-en { + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; -- cgit From b11d083c5dcec7c42fe982c854706d404ddd3a5f Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 26 Aug 2022 07:53:31 +0200 Subject: ARM: dts: imx6q: add missing properties for sram All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3b77eae40e39..df86049a695b 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -163,6 +163,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; + ranges = <0 0x00900000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; -- cgit From f5848b95633d598bacf0500e0108dc5961af88c0 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 26 Aug 2022 07:53:32 +0200 Subject: ARM: dts: imx6dl: add missing properties for sram All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 8e0ed209ede0..dc919e09a505 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -84,6 +84,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; -- cgit From 088fe5237435ee2f7ed4450519b2ef58b94c832f Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 26 Aug 2022 07:53:33 +0200 Subject: ARM: dts: imx6qp: add missing properties for sram All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@940000: '#address-cells' is a required property sram@940000: '#size-cells' is a required property sram@940000: 'ranges' is a required property Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qp.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 050365513836..fc164991d2ae 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -9,12 +9,18 @@ ocram2: sram@940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; + ranges = <0 0x00940000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; ocram3: sram@960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; + ranges = <0 0x00960000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; -- cgit From 60c9213a1d9941a8b33db570796c3f9be8984974 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 26 Aug 2022 07:53:34 +0200 Subject: ARM: dts: imx6sl: add missing properties for sram All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 06a515121dfc..cfd6b4972ae7 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -115,6 +115,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SL_CLK_OCRAM>; }; -- cgit From 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 26 Aug 2022 07:53:35 +0200 Subject: ARM: dts: imx6sll: add missing properties for sram All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sll.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index d4a000c3dde7..2873369a57c0 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -115,6 +115,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; intc: interrupt-controller@a01000 { -- cgit From 415432c008b2bce8138841356ba444631cabaa50 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 26 Aug 2022 07:53:36 +0200 Subject: ARM: dts: imx6sx: add missing properties for sram All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 4d075e2bf749..2611eef3b2a2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -164,12 +164,18 @@ ocram_s: sram@8f8000 { compatible = "mmio-sram"; reg = <0x008f8000 0x4000>; + ranges = <0 0x008f8000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM_S>; }; ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SX_CLK_OCRAM>; }; -- cgit From 218db824a7519856d0eaaeb5c41ca504ed550210 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 26 Aug 2022 21:22:48 +0200 Subject: ARM: dts: imx6sl: use tabs for code indent This fixes the following error: arch/arm/boot/dts/imx6sl.dtsi:714: error: code indent should use tabs where possible Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index cfd6b4972ae7..01122ddfdc0d 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -61,10 +61,10 @@ <792000 1175000>, <396000 975000>; fsl,soc-operating-points = - /* ARM kHz SOC-PU uV */ - <996000 1225000>, - <792000 1175000>, - <396000 1175000>; + /* ARM kHz SOC-PU uV */ + <996000 1225000>, + <792000 1175000>, + <396000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, @@ -225,7 +225,7 @@ uart5: serial@2018000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -238,7 +238,7 @@ uart1: serial@2020000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -251,7 +251,7 @@ uart2: serial@2024000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02024000 0x4000>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -312,7 +312,7 @@ uart3: serial@2034000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02034000 0x4000>; interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -325,7 +325,7 @@ uart4: serial@2038000 { compatible = "fsl,imx6sl-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02038000 0x4000>; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_UART>, @@ -714,7 +714,7 @@ #power-domain-cells = <0>; power-supply = <®_pu>; clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, - <&clks IMX6SL_CLK_GPU2D_PODF>; + <&clks IMX6SL_CLK_GPU2D_PODF>; }; pd_disp: power-domain@2 { -- cgit From fd2dd7077c7498765e7326c1b7f34bde85f1a975 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 26 Aug 2022 21:22:49 +0200 Subject: ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines This fixes the following warning: arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple blank lines While at it, use tabs indent for some pinctrl entries. Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 35861bbea94e..c84ea1fac5e9 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -226,7 +226,7 @@ &iomuxc { pinctrl_bt_reg: btreggrp { fsl,pins = - ; + ; }; pinctrl_enet1: enet1grp { @@ -306,7 +306,6 @@ >; }; - pinctrl_uart1: uart1grp { fsl,pins = , @@ -347,24 +346,23 @@ pinctrl_otg1_reg: otg1grp { fsl,pins = - ; + ; }; - pinctrl_otg2_reg: otg2grp { fsl,pins = - ; + ; }; pinctrl_usb_otg1: usbotg1grp { fsl,pins = - , - ; + , + ; }; pinctrl_usb_otg2: usbot2ggrp { fsl,pins = - ; + ; }; pinctrl_usdhc2: usdhc2grp { -- cgit From 179141ca7c71184f6b96787c9a08018ca8a6ea63 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 30 Aug 2022 13:21:21 +0200 Subject: ARM: dts: imx6: skov: migrate to resistive-adc-touch Start to use more generic resistive-adc-touch node. ti,tsc2046 is an ADC controller used for resistive touchscreen. So, define it as ADC and attach resistive-adc-touch to it. Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi | 65 +++++++++++++++++++--------- 1 file changed, 45 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi index 8254bce1b8a2..b81799d7076a 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi @@ -2,35 +2,60 @@ // // Copyright (C) 2020 Pengutronix, Ulrich Oelmann +/ { + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>; + io-channel-names = "y", "z1", "z2", "x"; + touchscreen-min-pressure = <65000>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + touchscreen-x-plate-ohms = <300>; + touchscreen-y-plate-ohms = <800>; + }; +}; + &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; status = "okay"; - touchscreen@0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch>; - compatible = "ti,tsc2046"; + adc_ts: adc@0 { + compatible = "ti,tsc2046e-adc"; reg = <0>; + pinctrl-0 = <&pinctrl_touch>; + pinctrl-names ="default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <®_3v3>; - pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; - ti,x-plate-ohms = /bits/ 16 <850>; - ti,y-plate-ohms = /bits/ 16 <295>; - ti,pressure-min = /bits/ 16 <2>; - ti,pressure-max = /bits/ 16 <1500>; - ti,vref-mv = /bits/ 16 <3300>; - ti,settle-delay-usec = /bits/ 16 <15>; - ti,vref-delay-usecs = /bits/ 16 <0>; - ti,penirq-recheck-delay-usecs = /bits/ 16 <100>; - ti,debounce-max = /bits/ 16 <100>; - ti,debounce-tol = /bits/ 16 <(~0)>; - ti,debounce-rep = /bits/ 16 <4>; - touchscreen-swapped-x-y; - touchscreen-inverted-y; - wakeup-source; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; }; }; -- cgit From 5b3a87a5c4f20da682d50dbaf8c4aa357cfd0d2d Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Thu, 7 Jul 2022 09:39:54 +0000 Subject: arm64: dts: meson: add support for Beelink GT1 Ultimate The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200) reference design with the following specifications: - 3GB DDR3 RAM - 32GB eMMC - HDMI 2.1 video - S/PDIF optical output - 10/100/1000 Ethernet - AP6356S Wireless (802.11 a/b/g/n, BT 4.2) - 3x USB 2.0 ports - IR receiver - 1x micro SD card slot - 1x Power LED (white) - 1x Reset button (internal) Signed-off-by: Christian Hewitt Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220707093954.21716-2-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxm-gt1-ultimate.dts | 91 ++++++++++++++++++++++ 2 files changed, 92 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 33e9c96af099..e213aeebb774 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts new file mode 100644 index 000000000000..2c267884cc16 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) Christian Hewitt + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include +#include + +/ { + compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm"; + model = "Beelink GT1 Ultimate"; + + leds { + compatible = "gpio-leds"; + + led-white { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "update"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-beelink-gs1"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; -- cgit From 9176ba910ba0309dd025b55381601da5f414b36e Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 2 Sep 2022 12:20:56 +0530 Subject: arm64: dts: rockchip: Add RK3399-T OPP table RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz. Add CPU operating points table for it. Signed-off-by: FUKAUMI Naoki Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi | 114 +++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi new file mode 100644 index 000000000000..1ababadda9df --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2022 Radxa Limited + */ + +/ { + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <875000 875000 1250000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <875000 875000 1250000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000 900000 1250000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <975000 975000 1250000>; + }; + }; + + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <875000 875000 1250000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <875000 875000 1250000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <875000 875000 1250000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <925000 925000 1250000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1000000 1000000 1250000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1075000 1075000 1250000>; + }; + opp06 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1150000 1150000 1250000>; + }; + }; + + gpu_opp_table: opp-table-2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <875000 875000 1150000>; + }; + opp01 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <875000 875000 1150000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <875000 875000 1150000>; + }; + opp03 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000 975000 1150000>; + }; + }; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; -- cgit From 246450344dad087a121befbed1aba776dba3d377 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 2 Sep 2022 12:20:57 +0530 Subject: arm64: dts: rockchip: rk3399: Radxa ROCK 4C+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Signed-off-by: Stephen Chen Signed-off-by: Manoj Sai Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-rock-4c-plus.dts | 646 +++++++++++++++++++++ 2 files changed, 647 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 236e8ae52c70..cdd1f211496d 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts new file mode 100644 index 000000000000..a1c4727acfcd --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -0,0 +1,646 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2022 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-t-opp.dtsi" + +/ { + model = "Radxa ROCK 4C+"; + compatible = "radxa,rock-4c-plus", "rockchip,rk3399"; + + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_host1: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_host0_s0>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_lan: vcc3v3-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x2a>; + rx_delay = <0x21>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <180>; + clock-frequency = <400000>; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5>; + vcc6-supply = <&vcc_buck5>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_log"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_cpu_l"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc3v3_sys"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_buck5"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_0v9: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcca_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc0v9_soc: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcc0v9_soc"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcca_1v8: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_mipi: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc_1v5"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_3v0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_cam"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_host0_s0: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host0_s0"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + lcd_3v3: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "lcd_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel1_gpio>; + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel2_gpio>; + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + regulator-initial-mode = <1>; /* 1:force PWM 2:auto */ + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>, + <4 9 1 &pcfg_pull_up_8ma>, + <4 10 1 &pcfg_pull_up_8ma>, + <4 11 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>; + }; + }; + + usb-typec { + vcc5v0_typec0_en: vcc5v0-typec-en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdhci { + max-frequency = <150000000>; + bus-width = <8>; + mmc-hs400-1_8v; + non-removable; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + extcon = <&u2phy0>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; -- cgit From 024744964ef6c0a65e348afafd4e1feae08eba5e Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Mon, 5 Sep 2022 01:36:47 +0200 Subject: arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro Voltage constraints on vccio_sd are invalid. They don't match the voltages that LDO9 can generate, and this causes rk808-regulator driver to fail to probe with -EINVAL when it tries to apply the constraints during boot. Fix the constraints to something that LDO9 can be actually configured for. Fixes: 78a21c7d5952 ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro") Signed-off-by: Ondrej Jirman Reviewed-by: Caleb Connolly Reviewed-by: Tom Fitzhenry Tested-by: Tom Fitzhenry Link: https://lore.kernel.org/r/20220904233652.3197885-1-megi@xff.cz Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index f00c80361377..2e058c315025 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -253,8 +253,8 @@ vccio_sd: LDO_REG9 { regulator-name = "vccio_sd"; - regulator-min-microvolt = <1710000>; - regulator-max-microvolt = <3150000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; }; vcc3v3_s0: SWITCH_REG { -- cgit From b2f3eac1b77c6feba4daff83de9436fcf728a5e5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 2 Sep 2022 10:05:11 +0530 Subject: arm64: dts: qcom: sc7280: Add cpu and llcc BWMON Add cpu and llcc BWMON nodes and their corresponding OPP tables for sc7280 SoC. Signed-off-by: Rajendra Nayak Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220902043511.17130-5-quic_rjendra@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 76 ++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 6a12223e442a..91beb17f0c1f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3288,6 +3288,82 @@ }; }; + pmu@9091000 { + compatible = "qcom,sc7280-llcc-bwmon"; + reg = <0 0x9091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <2188000>; + }; + opp-3 { + opp-peak-kBps = <3072000>; + }; + opp-4 { + opp-peak-kBps = <4068000>; + }; + opp-5 { + opp-peak-kBps = <6220000>; + }; + opp-6 { + opp-peak-kBps = <6832000>; + }; + opp-7 { + opp-peak-kBps = <8532000>; + }; + }; + }; + + pmu@90b6000 { + compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2400000>; + }; + opp-1 { + opp-peak-kBps = <4800000>; + }; + opp-2 { + opp-peak-kBps = <7456000>; + }; + opp-3 { + opp-peak-kBps = <9600000>; + }; + opp-4 { + opp-peak-kBps = <12896000>; + }; + opp-5 { + opp-peak-kBps = <14928000>; + }; + opp-6 { + opp-peak-kBps = <17056000>; + }; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; -- cgit From 2abf6b6b94290e10974bdd5f42e5ed73975f4452 Mon Sep 17 00:00:00 2001 From: Sheng-Liang Pan Date: Fri, 2 Sep 2022 16:09:11 +0800 Subject: arm64: dts: qcom: sc7280: Add device tree for herobrine evoker Add a basic device tree for the herobrine evoker board. Signed-off-by: Sheng-Liang Pan Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220902160845.v5.2.I7dd7a79c4cc5fe91c3feb004473feb3b34b7b2d8@changeid --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sc7280-herobrine-evoker-r0.dts | 333 +++++++++++++++++++++ 2 files changed, 334 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index fa8f8b66bb02..f4126f7e7640 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts new file mode 100644 index 000000000000..ccbe50b6249a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; -- cgit From ae240fbffbad6b2f1fc7f2d2f0bb8cf300c489a5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 2 Sep 2022 10:16:52 +0200 Subject: arm64: dts: qcom: sc8280xp: mark USB controllers as wakeup-sources The primary and secondary USB controllers can be used to wake the system from suspend so mark them accordingly. Signed-off-by: Johan Hovold Reviewed-by: Konrad Dybcio Tested-by: Steev Klimaszewski #Lenovo Thinkpad X13s Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220902081652.12631-1-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 49ea8b5612fc..c32bcded2aef 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -1312,6 +1312,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + status = "disabled"; usb_0_dwc3: usb@a600000 { @@ -1364,6 +1366,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + status = "disabled"; usb_1_dwc3: usb@a800000 { -- cgit From d0909bf4fa0fd79f59813952d868d0ad2fab656a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 5 Sep 2022 11:16:02 +0200 Subject: arm64: dts: qcom: fix syscon node names Some recent changes that added new syscon nodes used misspelled node names. Fixes: 86d7c9460e2c arm64: dts: qcom: sm8150: split TCSR halt regs out of mutex Fixes: 0da603387225 arm64: dts: qcom: sdm630: split TCSR halt regs out of mutex Fixes: 8a8531e69b2d arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex Fixes: d9a2214d6ba5 arm64: dts: qcom: sc7280: split TCSR halt regs out of mutex Fixes: ce1ac53c7faa arm64: dts: qcom: sc7180: split TCSR halt regs out of mutex Fixes: fc10cfa38580 arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex Fixes: 100ce2205924 arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex Signed-off-by: Johan Hovold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220905091602.20364-1-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 1e6b70582866..968eb13e1c63 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -839,7 +839,7 @@ #hwlock-cells = <1>; }; - tcsr_1: sycon@760000 { + tcsr_1: syscon@760000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x00760000 0x20000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d463a66715ea..1118134ff01e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1047,7 +1047,7 @@ #hwlock-cells = <1>; }; - tcsr_regs_1: sycon@1f60000 { + tcsr_regs_1: syscon@1f60000 { compatible = "qcom,msm8998-tcsr", "syscon"; reg = <0x01f60000 0x20000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index e8debb0da411..58976a1ba06b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1462,7 +1462,7 @@ #hwlock-cells = <1>; }; - tcsr_regs_1: sycon@1f60000 { + tcsr_regs_1: syscon@1f60000 { compatible = "qcom,sc7180-tcsr", "syscon"; reg = <0 0x01f60000 0 0x20000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 91beb17f0c1f..483201d74c77 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2160,7 +2160,7 @@ #hwlock-cells = <1>; }; - tcsr_1: sycon@1f60000 { + tcsr_1: syscon@1f60000 { compatible = "qcom,sc7280-tcsr", "syscon"; reg = <0 0x01f60000 0 0x20000>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 9ae6610af93a..b51b85f583e5 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -703,7 +703,7 @@ #hwlock-cells = <1>; }; - tcsr_regs_1: sycon@1f60000 { + tcsr_regs_1: syscon@1f60000 { compatible = "qcom,sdm630-tcsr", "syscon"; reg = <0x01f60000 0x20000>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 347c3abc117b..d761da47220d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2625,7 +2625,7 @@ #hwlock-cells = <1>; }; - tcsr_regs_1: sycon@1f60000 { + tcsr_regs_1: syscon@1f60000 { compatible = "qcom,sdm845-tcsr", "syscon"; reg = <0 0x01f60000 0 0x20000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index da737ba54490..4d4722165eb0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2054,7 +2054,7 @@ #hwlock-cells = <1>; }; - tcsr_regs_1: sycon@1f60000 { + tcsr_regs_1: syscon@1f60000 { compatible = "qcom,sm8150-tcsr", "syscon"; reg = <0x0 0x01f60000 0x0 0x20000>; }; -- cgit From 11975b9b813576686653cf76e768d08484a2ddba Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 2 Sep 2022 13:10:54 +0200 Subject: arm64: dts: qcom: Add pm7250b PMIC PM7250B is a PMIC primarily used for charging and fuel gauge but also has some of the standard functionality like temp-alarm, adc, etc. Add the .dtsi with some of the functionality added. Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20220902111055.106814-2-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/pm7250b.dtsi | 149 ++++++++++++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm7250b.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi new file mode 100644 index 000000000000..61f7a6345150 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (C) 2022 Luca Weiss + */ + +#include +#include + +/ { + thermal-zones { + pm7250b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm7250b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7250b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm7250b_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + adc-chan@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + adc-chan@2 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "usb_in_i_uv"; + }; + + adc-chan@8 { + reg = ; + qcom,pre-scaling = <1 16>; + label = "usb_in_v_div_16"; + }; + + adc-chan@9 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + adc-chan@e { + reg = ; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1390_therm"; + }; + + adc-chan@1e { + reg = ; + qcom,pre-scaling = <1 6>; + label = "chg_mid"; + }; + + adc-chan@83 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + adc-chan@84 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "vbat_sns"; + }; + + adc-chan@99 { + reg = ; + qcom,pre-scaling = <1 3>; + label = "chg_sbux"; + }; + }; + + pm7250b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + pmic@3 { + compatible = "qcom,pm7250b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; -- cgit From 80f63766e52d040726ff38b46e5f569a9fecaf5f Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 2 Sep 2022 13:10:55 +0200 Subject: arm64: dts: qcom: sm7225-fairphone-fp4: Add pm7250b PMIC The PM7250B is primarily used for charger and fuel gauge on Fairphone 4 but also has some thermal zones that we can configure already. Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220902111055.106814-3-luca.weiss@fairphone.com --- arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 67 +++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index c76abe7587b4..30c94fd4fe61 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -12,6 +12,7 @@ #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" +#include "pm7250b.dtsi" / { model = "Fairphone 4"; @@ -70,6 +71,36 @@ qcom,vmid = <15>; }; }; + + thermal-zones { + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; }; &adsp { @@ -353,6 +384,42 @@ linux,code = ; }; +&pm7250b_adc { + adc-chan@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + adc-chan@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &qupv3_id_1 { status = "okay"; }; -- cgit From 7dac7991408f77b0b33ee5e6b729baa683889277 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Mon, 5 Sep 2022 12:32:40 +0530 Subject: arm64: dts: qcom: sc8280xp-pmics: Remove reg entry & use correct node name for pmc8280c_lpg node Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. While at it, also remove the unused unit address in the node label. Also, since dt-bindings expect LPG/PWM node name to be "pwm", use correct node name as well, to fix the following error reported by 'make dtbs_check': 'lpg' does not match any of the regexes Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") Cc: Krzysztof Kozlowski Cc: Bryan O'Donoghue Cc: Bjorn Andersson Signed-off-by: Bhupesh Sharma Reviewed-by: Bryan O'Donoghue Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220905070240.1634997-1-bhupesh.sharma@linaro.org --- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index ae90b97aecb8..24836b6b9bbc 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -60,9 +60,8 @@ #interrupt-cells = <2>; }; - pmc8280c_lpg: lpg@e800 { + pmc8280c_lpg: pwm { compatible = "qcom,pm8350c-pwm"; - reg = <0xe800>; #address-cells = <1>; #size-cells = <0>; -- cgit From 3ae82f22ed7a746a8a9e89ea840401c46deddbb3 Mon Sep 17 00:00:00 2001 From: Jakob Hauser Date: Sun, 4 Sep 2022 23:49:35 +0200 Subject: arm64: dts: qcom: msm8916-samsung-serranove: Add magnetometer Add magnetometer Yamaha YAS537 to the DeviceTree of samsung-serranove. The YAS537 variant was recently added to the Yamaha YAS magnetometers driver [1]. In the DeviceTree of samsung-serranove for the Android kernel, there is unfortunately no information on interrupts or pinctrl [2]. In the Android kernel driver for magnetometer Yamaha YAS537, there is a device-specific matrix to correct an ellipsoid shape of the measure values into a sphere shape [3]. This could be converted and applied to a mount-matrix. However, the current state of the mainline Yamaha YAS537 driver needs post-process calibration in userspace anyway, as it lacks a formula to center the measure values around zero. The correction of the ellipsoid into a sphere can be done in the post-process calibration as well. A mount-matrix is needed nonetheless. When putting samsung-serranove flat on a table in portrait orientation heading north, the Yamaha YAS537 magnetometer axes natively point X+ to north, Y+ to east and Z+ into the ground, which corresponds to a common way to define the Earth's magnetic field coordinate system [4]. According to the IIO definition, it should be Y+ to north, X+ to east and Z+ upwards [5], which corresponds to a common device coordinate system and eases sensor fusing. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/iio/magnetometer/yamaha-yas530.c?id=65f79b501030678393eae0ae03d60a8151fbef55 [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-eur-r03.dtsi#L318-L321 [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L105-L106 [4] https://en.wikipedia.org/wiki/Earth%27s_magnetic_field#Characteristics [5] https://github.com/torvalds/linux/blob/v5.19/Documentation/devicetree/bindings/iio/mount-matrix.txt#L93-L126 Cc: Stephan Gerhold Signed-off-by: Jakob Hauser Reviewed-by: Linus Walleij Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220904214935.31032-1-jahau@rocketmail.com --- arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 439e89cf7878..bbd6bb3f4fd7 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -210,6 +210,15 @@ pinctrl-names = "default"; pinctrl-0 = <&imu_irq_default>; }; + + magnetometer@2e { + compatible = "yamaha,yas537"; + reg = <0x2e>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + }; }; &blsp_i2c4 { -- cgit From aa8dfaf50b2e122f51ce0c8083d4b861d9553c55 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 5 Jul 2022 14:23:55 +0200 Subject: ARM: dts: am335x-baltos: change nand-xfer-type Use "prefetch-dma" instead of "polled". Signed-off-by: Yegor Yefremov Message-Id: <20220705122355.14854-1-yegorslists@googlemail.com> Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index d3eafee79a23..6161c8929a78 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -197,7 +197,7 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; + ti,nand-xfer-type = "prefetch-dma"; gpmc,device-nand = "true"; gpmc,device-width = <1>; -- cgit From 2cf0cc032db609ff1975bd20ce7af03a2818a589 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 26 Jul 2022 10:34:40 +0200 Subject: ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices Add GPIO names for both SoC and TCA6416 lines. Signed-off-by: Yegor Yefremov Message-Id: <20220726083444.10159-1-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos-ir3220.dts | 148 +++++++++++++++++++++++++++++ arch/arm/boot/dts/am335x-baltos-ir5221.dts | 148 +++++++++++++++++++++++++++++ 2 files changed, 296 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 2123bd589484..087e084506d2 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -91,6 +91,10 @@ interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; + gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3", + "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3", + "ModeA0", "ModeA1", "ModeA2", "ModeA3", + "ModeB0", "ModeB1", "ModeB2", "ModeB3"; }; }; @@ -123,3 +127,147 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "UART2_RX", + "UART2_TX", + "I2C1_SDA", + "I2C1_SCL", + "WLAN_BTN", + "W_DISABLE", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "TCA6416_INT", + "RMII1_TXD1", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "RMII1_TXD0", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "UART2_DTR", + "UART2_DSR", + "UART2_DCD", + "UART2_RI", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SD_CD", + "SD_WP", + "RMII1_RXD1", + "RMII1_RXD0", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "RMII1_CRS_DV", + "RMII1_RXER", + "RMII1_TXEN", + "3G_PWR_EN", + "UART2_CTSN", + "UART2_RTSN", + "WLAN_IRQ", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "USB1_DRVVBUS", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 2f3872dbf4f4..faeb39aab60a 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -99,6 +99,10 @@ interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; + gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3", + "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3", + "ModeA0", "ModeA1", "ModeA2", "ModeA3", + "ModeB0", "ModeB1", "ModeB2", "ModeB3"; }; }; @@ -147,3 +151,147 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "UART2_RX", + "UART2_TX", + "I2C1_SDA", + "I2C1_SCL", + "WLAN_BTN", + "W_DISABLE", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "TCA6416_INT", + "RMII1_TXD1", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "RMII1_TXD0", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "DCAN1_TX", + "DCAN1_RX", + "CONSOLE_RX", + "CONSOLE_TX", + "UART2_DTR", + "UART2_DSR", + "UART2_DCD", + "UART2_RI", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SD_CD", + "SD_WP", + "RMII1_RXD1", + "RMII1_RXD0", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "RMII1_CRS_DV", + "RMII1_RXER", + "RMII1_TXEN", + "3G_PWR_EN", + "UART2_CTSN", + "UART2_RTSN", + "WLAN_IRQ", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "USB1_DRVVBUS", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; -- cgit From 523717d8d8d529087f36be617b49a98876045bb5 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 26 Jul 2022 10:34:41 +0200 Subject: ARM: dts: am335x-baltos: add GPIO names for ir2110 device Add GPIO names for SoC lines. Signed-off-by: Yegor Yefremov Message-Id: <20220726083444.10159-2-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos-ir2110.dts | 144 +++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index daf4cb398070..75992eec830f 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -81,3 +81,147 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "RMII1_TXD1", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "RMII1_TXD0", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "NC", + "NC", + "NC", + "SD_CD", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "RMII1_RXD1", + "RMII1_RXD0", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "RMII1_CRS_DV", + "RMII1_RXER", + "RMII1_TXEN", + "NC", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; -- cgit From f8eb856723625cd618dc0ce29528890395718d9b Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 26 Jul 2022 10:34:42 +0200 Subject: ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device Add GPIO names for SoC lines. Signed-off-by: Yegor Yefremov Message-Id: <20220726083444.10159-3-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 144 +++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts index 57e756b0f192..2e049489ac06 100644 --- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -85,3 +85,147 @@ status = "okay"; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "can_data", + "can_error", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "DCAN1_TX", + "DCAN1_RX", + "CONSOLE_RX", + "CONSOLE_TX", + "NC", + "NC", + "NC", + "NC", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; -- cgit From f5d044bdb8e7ca11448faaef45032d98665c9c0b Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 26 Jul 2022 10:34:43 +0200 Subject: ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices Add GPIO names for both SoC and TCA6416 lines. Signed-off-by: Yegor Yefremov Message-Id: <20220726083444.10159-4-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 156 +++++++++++++++++++++++++++ 1 file changed, 156 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts index 96dffd3ffd85..ad3adc7679f9 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -71,6 +71,10 @@ interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; + gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3", + "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7", + "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3", + "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7"; }; }; @@ -86,6 +90,10 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3", + "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3", + "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3", + "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3"; }; tca6416c: gpio@21 { @@ -93,6 +101,10 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3", + "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3", + "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3", + "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3"; }; }; @@ -113,3 +125,147 @@ ti,dual-emac-pvid = <2>; phy-handle = <&phy1>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "I2C2_SDA", + "I2C2_SCL", + "NC", + "NC", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "SW2_0_alt", + "SW2_1_alt", + "SW2_2_alt", + "SW2_3_alt", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "3G_PWR_EN", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; -- cgit From 8e9d75fd2ec2ad6c7b19dbafe1be966fd13e0f1d Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 26 Jul 2022 10:34:44 +0200 Subject: ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices Add GPIO names for SoC lines. Signed-off-by: Yegor Yefremov Message-Id: <20220726083444.10159-5-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 144 +++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts index c6cc1c6218a9..6ed886c3306b 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -93,3 +93,147 @@ ti,dual-emac-pvid = <2>; phy-handle = <&phy1>; }; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "UART2_RX", + "UART2_TX", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "UART1_CTSN", + "UART1_RTSN", + "UART1_RX", + "UART1_TX", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "NC", + "NC", + "CONSOLE_RX", + "CONSOLE_TX", + "UART2_DTR", + "UART2_DSR", + "UART2_DCD", + "UART2_RI", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "UART1_DTR", + "UART1_DSR", + "UART1_DCD", + "UART1_RI", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "NC", + "UART2_CTSN", + "UART2_RTSN", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; -- cgit From 7072784d97b2b140a9e5507a29fcbc9b70dfc343 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Mon, 29 Aug 2022 21:08:23 -0500 Subject: arm64: dts: allwinner: a100: Add device node for DMA controller The A100 SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by: Yangtao Li Signed-off-by: Samuel Holland Reviewed-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org --- arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index 548539c93ab0..5453a3bb7d81 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -101,6 +101,18 @@ #reset-cells = <1>; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun50i-a100-dma"; + reg = <0x03002000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + resets = <&ccu RST_BUS_DMA>; + dma-channels = <8>; + dma-requests = <52>; + #dma-cells = <1>; + }; + gic: interrupt-controller@3021000 { compatible = "arm,gic-400"; reg = <0x03021000 0x1000>, <0x03022000 0x2000>, -- cgit From 5db5663cdf369b3575dae464cdcda0233ab19f44 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Mon, 29 Aug 2022 21:08:24 -0500 Subject: arm64: dts: allwinner: a100: Add I2C DMA requests The I2C controllers in the A100 SoC are all connected to the DMA engine. Signed-off-by: Samuel Holland Reviewed-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org --- arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index 5453a3bb7d81..97e3e6907acd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -221,6 +221,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + dmas = <&dma 43>, <&dma 43>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -234,6 +236,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + dmas = <&dma 44>, <&dma 44>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -247,6 +251,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + dmas = <&dma 45>, <&dma 45>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -260,6 +266,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + dmas = <&dma 46>, <&dma 46>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -337,6 +345,8 @@ interrupts = ; clocks = <&r_ccu CLK_R_APB2_I2C0>; resets = <&r_ccu RST_R_APB2_I2C0>; + dmas = <&dma 50>, <&dma 50>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&r_i2c0_pins>; status = "disabled"; @@ -352,6 +362,8 @@ interrupts = ; clocks = <&r_ccu CLK_R_APB2_I2C1>; resets = <&r_ccu RST_R_APB2_I2C1>; + dmas = <&dma 51>, <&dma 51>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&r_i2c1_pins>; status = "disabled"; -- cgit From a067916d20bd52bd7c13af02bda1eb4f93e68539 Mon Sep 17 00:00:00 2001 From: Clément Péron Date: Tue, 6 Sep 2022 17:30:31 +0200 Subject: arm64: dts: allwinner: h6: Add cooling map for GPU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a simple cooling map for the GPU. This cooling map come from the vendor kernel 4.9 with a 2°C hysteresis added. Signed-off-by: Clément Péron Acked-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220906153034.153321-3-peron.clem@gmail.com --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 51 ++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 5a28303d3d4c..53f6660656ac 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -186,6 +186,7 @@ clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; clock-names = "core", "bus"; resets = <&ccu RST_BUS_GPU>; + #cooling-cells = <2>; status = "disabled"; }; @@ -1072,9 +1073,55 @@ }; gpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + polling-delay-passive = <1000>; + polling-delay = <2000>; thermal-sensors = <&ths 1>; + + trips { + gpu_alert0: gpu-alert-0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: gpu-alert-1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert2: gpu-alert-2 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + // Forbid the GPU to go over 756MHz + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu 1 THERMAL_NO_LIMIT>; + }; + + // Forbid the GPU to go over 624MHz + map1 { + trip = <&gpu_alert1>; + cooling-device = <&gpu 2 THERMAL_NO_LIMIT>; + }; + + // Forbid the GPU to go over 576MHz + map2 { + trip = <&gpu_alert2>; + cooling-device = <&gpu 3 THERMAL_NO_LIMIT>; + }; + }; }; }; }; -- cgit From 116745dd557b85e32adc9e1aa8b7d5c5079aba1b Mon Sep 17 00:00:00 2001 From: Clément Péron Date: Tue, 6 Sep 2022 17:30:32 +0200 Subject: arm64: dts: allwinner: h6: Add GPU OPP table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6. The voltage range is set with minimal voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator. Signed-off-by: Clément Péron Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220906153034.153321-4-peron.clem@gmail.com --- .../boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi new file mode 100644 index 000000000000..b48049c4fc85 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2022 Clément Péron + +/ { + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-264000000 { + opp-hz = /bits/ 64 <264000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-336000000 { + opp-hz = /bits/ 64 <336000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp-360000000 { + opp-hz = /bits/ 64 <360000000>; + opp-microvolt = <820000 820000 1200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt = <830000 830000 1200000>; + }; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <840000 840000 1200000>; + }; + + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <850000 850000 1200000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + opp-microvolt = <860000 860000 1200000>; + }; + + opp-456000000 { + opp-hz = /bits/ 64 <456000000>; + opp-microvolt = <870000 870000 1200000>; + }; + + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <890000 890000 1200000>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + opp-microvolt = <910000 910000 1200000>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-microvolt = <930000 930000 1200000>; + }; + + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <950000 950000 1200000>; + }; + + opp-756000000 { + opp-hz = /bits/ 64 <756000000>; + opp-microvolt = <1040000 1040000 1200000>; + }; + }; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +}; -- cgit From a684aa3830f547bb698c524b11c89e3f24433c1f Mon Sep 17 00:00:00 2001 From: Clément Péron Date: Tue, 6 Sep 2022 17:30:34 +0200 Subject: arm64: dts: allwinner: beelink-gs1: Enable GPU OPP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable GPU OPP table for Beelink GS1. Signed-off-by: Clément Péron Acked-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220906153034.153321-6-peron.clem@gmail.com --- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 6249e9e02928..9ec49ac2f6fd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -5,6 +5,7 @@ #include "sun50i-h6.dtsi" #include "sun50i-h6-cpu-opp.dtsi" +#include "sun50i-h6-gpu-opp.dtsi" #include -- cgit From b626ac159e5e2ca3eac4079622b9f4105814768f Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Sep 2022 10:58:30 +0200 Subject: arm64: dts: qcom: sc7280: correct CPU BWMON unit address Correct CPU BWMON unit address to match the "reg" property. Reported-by: Stephen Boyd Fixes: b2f3eac1b77c ("arm64: dts: qcom: sc7280: Add cpu and llcc BWMON") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220908085830.39141-1-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 483201d74c77..aa20a4e91b2c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3328,7 +3328,7 @@ }; }; - pmu@90b6000 { + pmu@90b6400 { compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; reg = <0 0x090b6400 0 0x600>; -- cgit From 00d92171ee142200000a984dd1e3cfe599252ec3 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Thu, 8 Sep 2022 02:11:53 +0530 Subject: arm64: dts: qcom: sa8155p-adp: Remove unused properties from eth node The 'snps,ptp-ref-clk-rate' and 'snps,ptp-req-clk-rate' properties are not supported by the stmmac driver currently, so remove them from the sa8155p-adp ethernet node as well. Cc: Bjorn Andersson Cc: Rob Herring Cc: Vinod Koul Cc: David Miller Signed-off-by: Bhupesh Sharma Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220907204153.2039776-1-bhupesh.sharma@linaro.org --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index ba547ca9fc6b..87ab0e1ecd16 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -333,9 +333,6 @@ snps,reset-active-low; snps,reset-delays-us = <0 11000 70000>; - snps,ptp-ref-clk-rate = <250000000>; - snps,ptp-req-clk-rate = <96000000>; - snps,mtl-rx-config = <&mtl_rx_setup>; snps,mtl-tx-config = <&mtl_tx_setup>; -- cgit From 8419e21affa77048a3b5ab27968d2b729cdf9289 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Tue, 30 Aug 2022 17:45:17 +0100 Subject: ARM: dts: r9a06g032: Add CAN{0,1} nodes Add CAN{0,1} nodes to R9A06G032 (RZ/N1) SoC DTSI. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20220830164518.1381632-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r9a06g032.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 5b97fa85474f..563024c9a4ae 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -423,6 +423,26 @@ interrupts = ; }; + + can0: can@52104000 { + compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000"; + reg = <0x52104000 0x800>; + reg-io-width = <4>; + interrupts = ; + clocks = <&sysctrl R9A06G032_HCLK_CAN0>; + power-domains = <&sysctrl>; + status = "disabled"; + }; + + can1: can@52105000 { + compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; + reg = <0x52105000 0x800>; + reg-io-width = <4>; + interrupts = ; + clocks = <&sysctrl R9A06G032_HCLK_CAN1>; + power-domains = <&sysctrl>; + status = "disabled"; + }; }; timer { -- cgit From 5b8adc815b80eb66d1a028ec7ce0d56ce6c7a81a Mon Sep 17 00:00:00 2001 From: Biju Das Date: Fri, 2 Sep 2022 07:27:52 +0100 Subject: ARM: dts: r9a06g032-rzn1d400-db: Enable CAN1 The CN10/CN11 on RZ/N1-EB board are headers to add jumpers to select which CAN interface to route to the real CAN connector J16. For a normal use case either we need to wire CAN1 or CAN2, but not both. This patch enables CAN1 and disables CAN2 by default assuming CN10/CN11 is wired for CAN1. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20220902062752.56841-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts index 4bf813335e21..c18bbd7141c4 100644 --- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -26,6 +26,22 @@ }; }; +&can0 { + pinctrl-0 = <&pins_can0>; + pinctrl-names = "default"; + + /* Assuming CN10/CN11 are wired for CAN1 */ + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&pins_can1>; + pinctrl-names = "default"; + + /* Please only enable can0 or can1, depending on CN10/CN11 */ + /* status = "okay"; */ +}; + ð_miic { status = "okay"; renesas,miic-switch-portin = ; @@ -52,6 +68,18 @@ }; &pinctrl{ + pins_can0: pins_can0 { + pinmux = , /* CAN0_TXD */ + ; /* CAN0_RXD */ + drive-strength = <6>; + }; + + pins_can1: pins_can1 { + pinmux = , /* CAN1_TXD */ + ; /* CAN1_RXD */ + drive-strength = <6>; + }; + pins_eth3: pins_eth3 { pinmux = , , -- cgit From ab1ad455cf33de6dc1f6cbf0d0d1d49dbe3d9e4f Mon Sep 17 00:00:00 2001 From: Georgi Vlaev Date: Tue, 31 May 2022 23:52:28 +0300 Subject: arm64: dts: ti: k3-am62-main: Add epwm nodes Add the compatible DT nodes for all EPWM instances present in AM62 SoC. There is a total of 3 EPWM modules available, sharing the same K3 IP as in AM64 SoC. This also adds a required "ti,am62-epwm-tbclk" clock provider node for the EPWM time-base clock. Signed-off-by: Georgi Vlaev Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20220531205229.198011-2-g-vlaev@ti.com --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 33 ++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 12ab7548dc77..03660476364f 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -54,6 +54,12 @@ reg = <0x4044 0x8>; #phy-cells = <1>; }; + + epwm_tbclk: clock@4130 { + compatible = "ti,am62-epwm-tbclk", "syscon"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; }; dmss: bus@48000000 { @@ -584,4 +590,31 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + }; }; -- cgit From acf3fdc88665a26abfe22827993a2dabf182a513 Mon Sep 17 00:00:00 2001 From: Georgi Vlaev Date: Tue, 31 May 2022 23:52:29 +0300 Subject: arm64: dts: ti: k3-am625-sk: Add epwm nodes Add epwm nodes and mark them disabled, as they're not currently in use. Signed-off-by: Georgi Vlaev Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20220531205229.198011-3-g-vlaev@ti.com --- arch/arm64/boot/dts/ti/k3-am625-sk.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 9b4dbae9d4aa..93a5f0817efc 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -502,3 +502,15 @@ &main_mcan0 { status = "disabled"; }; + +&epwm0 { + status = "disabled"; +}; + +&epwm1 { + status = "disabled"; +}; + +&epwm2 { + status = "disabled"; +}; -- cgit From a5d5e515ed89709de8ad2537cd9d611b95e1928b Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Fri, 26 Aug 2022 21:16:23 -0500 Subject: arm64: dts: rockchip: add rk817 chg to Odroid Go Advance Add the new rk817 charger driver to the Odroid Go Advance. Create a monitored battery node as well for the charger to use. All values from monitored battery are gathered from the BSP kernel for the Odroid Go Advance provided by HardKernel. Signed-off-by: Chris Morgan Signed-off-by: Maya Matuszczyk Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 415aa9ff8bd4..72899a714310 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -52,6 +52,25 @@ pwms = <&pwm1 0 25000 0>; }; + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4100000>; + voltage-min-design-microvolt = <3500000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, + <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, + <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, + <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, + <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, + <3574170 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +491,13 @@ }; }; + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; }; -- cgit From 7ebfd4f6b52a60820e8d03577fdb082176cd8e79 Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Thu, 8 Sep 2022 03:17:25 +0000 Subject: arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+ only user_led2 (blue) is supported. user_led1 (green) is not connected to any gpio so it cannot be controlled. Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220908031726.1307105-1-naoki@radxa.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 401e1ae9d944..6464a6729729 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -27,6 +28,20 @@ #clock-cells = <0>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led2>; + + /* USER_LED2 */ + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; @@ -553,6 +568,12 @@ }; }; + leds { + user_led2: user-led2 { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; -- cgit From 6cbd76752791552554e5587f34781408215d1e5b Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Thu, 8 Sep 2022 03:17:26 +0000 Subject: arm64: dts: rockchip: add LEDs for ROCK 4C+ add support for user LEDs on Radxa ROCK 4C+ board. Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220908031726.1307105-2-naoki@radxa.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399-rock-4c-plus.dts | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index a1c4727acfcd..3f01772c66ad 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include #include "rk3399.dtsi" #include "rk3399-t-opp.dtsi" @@ -38,6 +39,28 @@ #clock-cells = <0>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led1 &user_led2>; + + /* USER_LED1 */ + led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + /* USER_LED2 */ + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -424,6 +447,16 @@ }; }; + leds { + user_led1: user-led1 { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led2: user-led2 { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; -- cgit From bc17f2b9608fe2fdccd4fef95ef8b407f5c33174 Mon Sep 17 00:00:00 2001 From: Frank Wunderlich Date: Tue, 6 Sep 2022 18:42:12 +0200 Subject: arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist Signed-off-by: Frank Wunderlich Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 7a8d55a898f5..950613595f42 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -46,7 +46,7 @@ }; }; - dc_12v: dc-12v { + dc_12v: dc-12v-regulator { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; @@ -66,7 +66,7 @@ }; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -76,7 +76,7 @@ vin-supply = <&dc_12v>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -146,7 +146,7 @@ vin-supply = <&vcc3v3_pi6c_05>; }; - vcc5v0_usb: vcc5v0_usb { + vcc5v0_usb: vcc5v0-usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -156,7 +156,7 @@ vin-supply = <&dc_12v>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -168,7 +168,7 @@ vin-supply = <&vcc5v0_usb>; }; - vcc5v0_usb_otg: vcc5v0-usb-otg { + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; -- cgit From 523adb553573db46593724fd1cd617339f2e9009 Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Tue, 6 Sep 2022 16:03:24 -0500 Subject: arm64: dts: rockchip: add Anbernic RG353P and RG503 Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices from Anbernic. Both devices have: - 2 SDMMC slots. - A Realtek rtl8821cs WiFi/Bluetooth adapter. - A mini HDMI port. - A USB C host port and a USB C otg port (currently only working as device). - Multiple GPIO buttons and a single ADC button. - Dual analog joysticks controlled via a GPIO mux. - A headphone jack with amplified stereo speakers via a SGM4865 amp. - A PWM based vibrator for force feedback. The RG353P has: - 2GB LPDDR4 RAM. - A 32GB eMMC. - A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c controlled touchscreen (touchscreen is a Hynitron CST340). The RG503 has: - 1GB LPDDR4 RAM. - A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung with part number ams495qa04. Data for this panel is provided via the DSI interface, however commands are sent via a 9-bit 3-wire SPI interface. The MISO pin of SPI3 of the SOC is wired to the input of the panel, so it must be bitbanged. This devicetree enables the following hardware: - HDMI (plus audio). - Analog audio, including speakers. - All buttons. - All SDMMC/eMMC/SDIO controllers. - The ADC joysticks (note a pending patch is required to use them). - WiFi/Bluetooth (note out of tree drivers are required). - The PWM based vibrator motor. The following hardware is not enabled: - The display panels (drivers are being written and there are issues with the upstream DSI and VOP2 subsystems). - Battery (driver pending). - Touchscreen on the RG353P (note the i2c2 bus is enabled for it). Signed-off-by: Chris Morgan Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 2 + .../boot/dts/rockchip/rk3566-anbernic-rg353p.dts | 94 +++ .../boot/dts/rockchip/rk3566-anbernic-rg503.dts | 87 +++ .../boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi | 831 +++++++++++++++++++++ 4 files changed, 1014 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index cdd1f211496d..94639380ec1e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -60,6 +60,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts new file mode 100644 index 000000000000..7a20e2d6876a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include "rk3566-anbernic-rgxx3.dtsi" + +/ { + model = "RG353P"; + compatible = "anbernic,rg353p", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; +}; + +&gpio_keys_control { + button-a { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = ; + }; + + button-left { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = ; + }; + + button-r1 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = ; + }; + + button-r2 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = ; + }; + + button-right { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = ; + }; + + button-y { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = ; + }; +}; + +&i2c0 { + /* This hardware is physically present but unused. */ + power-monitor@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + status = "disabled"; + }; +}; + +&i2c2 { + pintctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&sdhci { + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts new file mode 100644 index 000000000000..3dc01549a5b4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include "rk3566-anbernic-rgxx3.dtsi" + +/ { + model = "RG503"; + compatible = "anbernic,rg503", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdmmc2; + }; + + gpio_spi: spi { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + }; +}; + +&gpio_keys_control { + button-a { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = ; + }; + + button-left { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = ; + }; + + button-right { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = ; + }; + + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = ; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = ; + }; + + button-right { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = ; + }; + + button-y { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = ; + }; +}; + +&pinctrl { + gpio-spi { + spi_pins: spi-pins { + rockchip,pins = + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi new file mode 100644 index 000000000000..2b455143b86d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "rk3566.dtsi" + +/ { + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_en>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = ; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = ; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = ; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = ; + }; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + /* + * Button is mapped to F key in BSP kernel, but + * according to input guidelines it should be mode. + */ + button-mode { + label = "MODE"; + linux,code = ; + press-threshold-microvolt = <1750>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "right_x", "left_y", "right_y"; + #io-channel-cells = <1>; + io-channels = <&saradc 3>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + + gpio_keys_control: gpio-keys-control { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-b { + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = ; + }; + + button-down { + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = ; + }; + + button-l1 { + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = ; + }; + + button-l2 { + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = ; + }; + + button-select { + gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = ; + }; + + button-start { + gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = ; + }; + + button-thumbl { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = ; + }; + + button-thumbr { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = ; + }; + + button-up { + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = ; + }; + + button-x { + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = ; + }; + }; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-vol-down { + gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = ; + }; + + button-vol-up { + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = ; + }; + }; + + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, + <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c5>; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + green_led: led-0 { + color = ; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + + amber_led: led-1 { + color = ; + function = LED_FUNCTION_CHARGING; + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + }; + + red_led: led-2 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + }; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "anbernic_rk817"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_sys: regulator-vcc-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-name = "vcc_sys"; + }; + + vcc_wifi: regulator-vcc-wifi { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_wifi_h>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; + + vibrator: pwm-vibrator { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm5 0 1000000000 0>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-0 = <&hdmitxm0_cec>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4700000>; + regulator-max-microvolt = <5400000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "fcs,fan53555"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + /* Unknown/unused device at 0x3c */ + status = "disabled"; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + pinctrl-names = "default"; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + btn_pins_vol: btn-pins-vol { + rockchip,pins = + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-led { + led_pins: led-pins { + rockchip,pins = + <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + joy-mux { + joy_mux_en: joy-mux-en { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wifi { + vcc_wifi_h: vcc-wifi-h { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; +}; + +&pwm5 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc1v8_dvp>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt"; + device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart2 { + status = "okay"; +}; + +/* + * Lack the schematics to verify, but port works as a peripheral + * (and not a host or OTG port). + */ +&usb_host0_xhci { + dr_mode = "peripheral"; + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; -- cgit From d28b680a34948d7634b824b1fc7546e9dc8422fb Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 3 Jun 2022 18:35:38 +0200 Subject: ARM: dts: rockchip: fix rk3036 emac node compatible string The Linux kernel has no logic to decide which driver to probe first. To prevent race conditions remove the rk3036 emac node fall back compatible string. Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20220603163539.537-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3036.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 9b0f0497567d..e240b89b0b35 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -225,7 +225,7 @@ }; emac: ethernet@10200000 { - compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + compatible = "rockchip,rk3036-emac"; reg = <0x10200000 0x4000>; interrupts = ; #address-cells = <1>; -- cgit From 1dabb74971b38d966ecef566bafddc4a34f4db9d Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 3 Jun 2022 18:35:39 +0200 Subject: ARM: dts: rockchip: restyle emac nodes The emac_rockchip.txt file is converted to YAML. Phy nodes are now a subnode of mdio, so restyle the emac nodes of rk3036/rk3066/rk3188. Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3036-evb.dts | 16 ++++++++++------ arch/arm/boot/dts/rk3036-kylin.dts | 16 ++++++++++------ arch/arm/boot/dts/rk3036.dtsi | 2 -- arch/arm/boot/dts/rk3066a-marsboard.dts | 17 ++++++++++------- arch/arm/boot/dts/rk3066a-rayeager.dts | 15 ++++++++++----- arch/arm/boot/dts/rk3188-radxarock.dts | 19 +++++++++++-------- arch/arm/boot/dts/rk3xxx.dtsi | 2 -- 7 files changed, 51 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2a7e6624efb9..9fd4d9db9f8f 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -15,16 +15,20 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ - + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index e817eba8c622..67e1e04139e7 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -80,16 +80,20 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ - + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index e240b89b0b35..78686fc72ce6 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -228,8 +228,6 @@ compatible = "rockchip,rk3036-emac"; reg = <0x10200000 0x4000>; interrupts = ; - #address-cells = <1>; - #size-cells = <0>; rockchip,grf = <&grf>; clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; clock-names = "hclk", "macref", "macclk"; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index a66d915aa0f6..8beecd628282 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -150,18 +150,21 @@ #include "tps65910.dtsi" &emac { - status = "okay"; - phy = <&phy0>; phy-supply = <&vcc_rmii>; - pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = ; + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = ; + }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index dbbc5170094e..3eee42137b6d 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -142,15 +142,20 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; phy = <&phy0>; phy-supply = <&vcc_rmii>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; - reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index a9ed3cd2c2da..e7cf18823558 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -126,18 +126,21 @@ }; &emac { - status = "okay"; - + phy = <&phy0>; + phy-supply = <&vcc_rmii>; pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + status = "okay"; - phy = <&phy0>; - phy-supply = <&vcc_rmii>; + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; - interrupt-parent = <&gpio3>; - interrupts = ; + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = ; + }; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 616a828e0c6e..bf285091a9eb 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -186,8 +186,6 @@ compatible = "snps,arc-emac"; reg = <0x10204000 0x3c>; interrupts = ; - #address-cells = <1>; - #size-cells = <0>; rockchip,grf = <&grf>; -- cgit From cd4e5f30f51f1066170a7c5f267cba6f062213e7 Mon Sep 17 00:00:00 2001 From: Nicolas Frattaroli Date: Mon, 18 Jul 2022 05:31:45 +0200 Subject: arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b This adds the regulator node to the quartz64-b device tree, and enables the PCIe 2 controller and combphy for it. Signed-off-by: Nicolas Frattaroli Link: https://lore.kernel.org/r/20220718033145.792657-1-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 3897980d69d1..1f709e5d8a87 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -69,6 +69,18 @@ power-off-delay-us = <5000000>; }; + vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + vcc5v0_in: vcc5v0-in-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_in"; @@ -128,6 +140,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -457,6 +473,14 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_p>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -478,6 +502,16 @@ }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = -- cgit From 1b8d4233f51632cb3134b373b5727e26ab7e0a49 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Tue, 26 Jul 2022 10:30:46 +0800 Subject: arm64: dts: rockchip: add rtc to rock3a Add devicetree node for hym8563 rtc to Radxa ROCK3 Model A board. Signed-off-by: Chukun Pan Link: https://lore.kernel.org/r/20220726023046.5876-1-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index cd8cc0c3c68a..037a2c3b1602 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -484,6 +484,23 @@ status = "disabled"; }; +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + &i2s0_8ch { status = "okay"; }; @@ -524,6 +541,12 @@ }; }; + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + leds { led_user_en: led_user_en { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; -- cgit From 0fbbfb0b00d17ae6b6c4f04e325203de9e37837a Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Tue, 26 Jul 2022 10:35:16 +0800 Subject: arm64: dts: rockchip: Enable PCIe controller on rock3a Add the nodes to enable the PCIe controller on the Radxa ROCK3 Model A board. Run test with the MT7921 pcie wireless card. Signed-off-by: Chukun Pan Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 34 +++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index 037a2c3b1602..e35f6ce812bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -67,6 +67,18 @@ regulator-boot-on; }; + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -173,6 +185,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -522,6 +538,14 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { cam { vcc_cam_en: vcc_cam_en { @@ -553,6 +577,16 @@ }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = -- cgit From 944be6fba401639e5bf2a8bc9f5e781e6cc4b4d4 Mon Sep 17 00:00:00 2001 From: Piotr Oniszczuk Date: Mon, 14 Feb 2022 22:29:54 +0100 Subject: arm64: dts: rockchip: Add VPU support for RK3568/RK3566 RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch enables RK356x video decoder in RK356x device-tree include. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txt Signed-off-by: Piotr Oniszczuk Reviewed-by: Ezequiel Garcia Link: https://lore.kernel.org/r/20220214212955.1178947-2-piotr.oniszczuk@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index c66b60302803..351797102a19 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -592,6 +592,26 @@ status = "disabled"; }; + vpu: video-codec@fdea0400 { + compatible = "rockchip,rk3568-vpu"; + reg = <0x0 0xfdea0000 0x0 0x800>; + interrupts = ; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vdpu_mmu>; + power-domains = <&power RK3568_PD_VPU>; + }; + + vdpu_mmu: iommu@fdea0800 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfdea0800 0x0 0x40>; + interrupts = ; + clock-names = "aclk", "iface"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + power-domains = <&power RK3568_PD_VPU>; + #iommu-cells = <0>; + }; + sdmmc2: mmc@fe000000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe000000 0x0 0x4000>; -- cgit From 03d86fb5a56919ccf47e1cc5861bb5452017ab93 Mon Sep 17 00:00:00 2001 From: Nicolas Frattaroli Date: Sun, 12 Jun 2022 17:53:46 +0200 Subject: arm64: dts: rockchip: Add Hantro encoder node to rk356x The RK3566 and RK3568 come with a dedicated Hantro instance solely for encoding. This patch adds a node for this to the device tree, along with a node for its MMU. Signed-off-by: Nicolas Frattaroli Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 351797102a19..fd903e697aa2 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -612,6 +612,26 @@ #iommu-cells = <0>; }; + vepu: video-codec@fdee0000 { + compatible = "rockchip,rk3568-vepu"; + reg = <0x0 0xfdee0000 0x0 0x800>; + interrupts = ; + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; + clock-names = "aclk", "hclk"; + iommus = <&vepu_mmu>; + power-domains = <&power RK3568_PD_RGA>; + }; + + vepu_mmu: iommu@fdee0800 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfdee0800 0x0 0x40>; + interrupts = ; + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3568_PD_RGA>; + #iommu-cells = <0>; + }; + sdmmc2: mmc@fe000000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe000000 0x0 0x4000>; -- cgit From 91419ae0420f0c91a326655d687b740826d0a3f9 Mon Sep 17 00:00:00 2001 From: Judy Hsiao Date: Fri, 8 Jul 2022 08:07:26 +0000 Subject: arm64: dts: rockchip: use BCLK to GPIO switch on rk3399 We discoverd that the state of BCLK on, LRCLK off and SD_MODE on may cause the speaker melting issue. Removing LRCLK while BCLK is present can cause unexpected output behavior including a large DC output voltage as described in the Max98357a datasheet. In order to: 1. prevent BCLK from turning on by other component. 2. keep BCLK and LRCLK being present at the same time This patch adjusts the device tree to allow BCLK to switch to GPIO func before LRCLK output, and switch back during LRCLK is output. Signed-off-by: Judy Hsiao Reviewed-by: Brian Norris Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 10 +++++++++ arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 +++++++++++++++++++++- 2 files changed, 34 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 40d4053fba80..ed3348b558f8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -768,6 +768,16 @@ camera: &i2c7 { <4 RK_PA0 1 &pcfg_pull_none_6ma>; }; +&i2s0_8ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>, + <3 RK_PD1 1 &pcfg_pull_none_6ma>, + <3 RK_PD2 1 &pcfg_pull_none_6ma>, + <3 RK_PD3 1 &pcfg_pull_none_6ma>, + <3 RK_PD7 1 &pcfg_pull_none_6ma>, + <4 RK_PA0 1 &pcfg_pull_none_6ma>; +}; + /* there is no external pull up, so need to set this pin pull up */ &sdmmc_cd_pin { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 9d5b0e8c9cca..f4fbd5bece0e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1664,8 +1664,9 @@ dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; - pinctrl-names = "default"; + pinctrl-names = "bclk_on", "bclk_off"; pinctrl-0 = <&i2s0_8ch_bus>; + pinctrl-1 = <&i2s0_8ch_bus_bclk_off>; power-domains = <&power RK3399_PD_SDIOAUDIO>; #sound-dai-cells = <0>; status = "disabled"; @@ -2409,6 +2410,19 @@ <3 RK_PD7 1 &pcfg_pull_none>, <4 RK_PA0 1 &pcfg_pull_none>; }; + + i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; }; i2s1 { @@ -2420,6 +2434,15 @@ <4 RK_PA6 1 &pcfg_pull_none>, <4 RK_PA7 1 &pcfg_pull_none>; }; + + i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off { + rockchip,pins = + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; + }; }; sdio0 { -- cgit From 6769089ecb5073b0896addffe72c89a4d80258c9 Mon Sep 17 00:00:00 2001 From: Joy Zou Date: Mon, 5 Sep 2022 16:36:15 +0800 Subject: ARM: dts: imx: update sdma node name format Node names should be generic, so change the sdma node name format 'sdma' into 'dma-controller'. Acked-by: Fabio Estevam Signed-off-by: Joy Zou Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 2 +- arch/arm/boot/dts/imx31.dtsi | 2 +- arch/arm/boot/dts/imx35.dtsi | 2 +- arch/arm/boot/dts/imx50.dtsi | 2 +- arch/arm/boot/dts/imx51.dtsi | 2 +- arch/arm/boot/dts/imx53.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/boot/dts/imx6sl.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 2 +- arch/arm/boot/dts/imx7s.dtsi | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index bc4de0c05511..5f90d72b840b 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -515,7 +515,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 5c4938b0d5a1..95c05f17a6d5 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -297,7 +297,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx31-sdma"; reg = <0x53fd4000 0x4000>; interrupts = <34>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 8e41c8b7bd70..d650f54c3fc6 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -284,7 +284,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx35-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 9>, <&clks 65>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index c0c7575fbecf..3d9a9f37f672 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -421,7 +421,7 @@ status = "disabled"; }; - sdma: sdma@63fb0000 { + sdma: dma-controller@63fb0000 { compatible = "fsl,imx50-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 592d9c23a447..853707574d2e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -504,7 +504,7 @@ status = "disabled"; }; - sdma: sdma@83fb0000 { + sdma: dma-controller@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b7a6469d3472..56b3c13f4eb7 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -710,7 +710,7 @@ status = "disabled"; }; - sdma: sdma@63fb0000 { + sdma: dma-controller@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4f7fefc14d0a..ff1e0173b39b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -929,7 +929,7 @@ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 01122ddfdc0d..28111efb19a6 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -750,7 +750,7 @@ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 2611eef3b2a2..abc3572d699e 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -848,7 +848,7 @@ reg = <0x020e4000 0x4000>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index c95efd1d8c2d..2b5996395701 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -744,7 +744,7 @@ status = "disabled"; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 29148285f9fc..0fc9e6b8b05d 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1224,7 +1224,7 @@ status = "disabled"; }; - sdma: sdma@30bd0000 { + sdma: dma-controller@30bd0000 { compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; -- cgit From 446d5be806541e69cd9548407ce6976861d0b855 Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Thu, 21 Jul 2022 17:29:32 +0200 Subject: ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi Add the 5 instances of i2c busses supported by the stm32mp131. Signed-off-by: Alain Volmat Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp131.dtsi | 90 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 3a921db23e9f..da9e8a6ca663 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -106,6 +106,42 @@ status = "disabled"; }; + i2c1: i2c@40012000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x40012000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C1_K>; + resets = <&rcc I2C1_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 33 0x400 0x1>, + <&dmamux1 34 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x1>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c2: i2c@40013000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 35 0x400 0x1>, + <&dmamux1 36 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + i2c-analog-filter; + status = "disabled"; + }; + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -153,6 +189,60 @@ dma-channels = <16>; }; + i2c3: i2c@4c004000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c004000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 73 0x400 0x1>, + <&dmamux1 74 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x4>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c4: i2c@4c005000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c005000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 75 0x400 0x1>, + <&dmamux1 76 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x8>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c5: i2c@4c006000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c006000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 115 0x400 0x1>, + <&dmamux1 116 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x10>; + i2c-analog-filter; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp13-rcc", "syscon"; reg = <0x50000000 0x1000>; -- cgit From f5a058023239374031644f1e6db9bf8b7b40895a Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Thu, 21 Jul 2022 17:29:33 +0200 Subject: ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts Enable the two i2c busses i2c1 and i2c5 available on the stm32mp135f-dk Discovery board. Signed-off-by: Alain Volmat Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32mp135f-dk.dts | 26 ++++++++++++++++++++++++ 2 files changed, 60 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index d2472cd8f1d0..749078ba9d42 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -6,6 +6,40 @@ #include &pinctrl { + i2c1_pins_a: i2c1-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_sleep_pins_a: i2c1-sleep-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_sleep_pins_a: i2c5-sleep-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = , /* SDMMC1_D0 */ diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index e6b8ffd332c7..3e2823332d51 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -68,6 +68,32 @@ }; }; +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <1000000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <170>; + i2c-scl-falling-time-ns = <5>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + &iwdg2 { timeout-sec = <32>; status = "okay"; -- cgit From 8539ebb435a519b7cb8888cdd1c464b3c32a8a69 Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Mon, 25 Jul 2022 09:52:54 +0200 Subject: ARM: dts: stm32: add spi nodes into stm32mp131.dtsi Add the 5 instances of spi busses supported by the stm32mp131. Signed-off-by: Alain Volmat Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp131.dtsi | 70 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index da9e8a6ca663..dd35a607073d 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -97,6 +97,34 @@ }; }; + spi2: spi@4000b000 { + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = ; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = ; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; @@ -142,6 +170,20 @@ status = "disabled"; }; + spi1: spi@44004000 { + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = ; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -189,6 +231,34 @@ dma-channels = <16>; }; + spi4: spi@4c002000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c002000 0x400>; + interrupts = ; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 83 0x400 0x01>, + <&dmamux1 84 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi5: spi@4c003000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c003000 0x400>; + interrupts = ; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 85 0x400 0x01>, + <&dmamux1 86 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c3: i2c@4c004000 { compatible = "st,stm32mp13-i2c"; reg = <0x4c004000 0x400>; -- cgit From 15f72e0da4daf843e631f3c7d55dd57252fa1259 Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Mon, 25 Jul 2022 09:52:55 +0200 Subject: ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk Add pinctrl information and a disabled spi5 node within stm32mp135f-dk.dts in order to use the spi5 bus which is available via the GPIO expansion pins of the STM32MP135 Discovery board. Signed-off-by: Alain Volmat Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 23 +++++++++++++++++++++++ arch/arm/boot/dts/stm32mp135f-dk.dts | 7 +++++++ 2 files changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index 749078ba9d42..efdd163eba30 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -142,6 +142,29 @@ }; }; + spi5_pins_a: spi5-0 { + pins1 { + pinmux = , /* SPI5_SCK */ + ; /* SPI5_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI5_MISO */ + bias-disable; + }; + }; + + spi5_sleep_pins_a: spi5-sleep-0 { + pins { + pinmux = , /* SPI5_SCK */ + , /* SPI5_MISO */ + ; /* SPI5_MOSI */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index 3e2823332d51..de341d17e87d 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -116,6 +116,13 @@ status = "okay"; }; +&spi5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_pins_a>; + pinctrl-1 = <&spi5_sleep_pins_a>; + status = "disabled"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; -- cgit From a9b70102253ce58b4aaf35a3898c075133120272 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 19 May 2022 18:28:38 +0200 Subject: ARM: dts: stm32: Add timer interrupts on stm32mp15 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The timer units in the stm32mp15x CPUs have interrupts, depending on the timer flavour either one "global" or four dedicated ones. Add the irqs to the timer units on stm32mp15x. Signed-off-by: Uwe Kleine-König Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 742fdeeff4b6..e02b3f5d44cb 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -127,6 +127,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40000000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM2_K>; clock-names = "int"; dmas = <&dmamux1 18 0x400 0x1>, @@ -160,6 +162,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40001000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM3_K>; clock-names = "int"; dmas = <&dmamux1 23 0x400 0x1>, @@ -194,6 +198,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40002000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM4_K>; clock-names = "int"; dmas = <&dmamux1 29 0x400 0x1>, @@ -226,6 +232,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40003000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM5_K>; clock-names = "int"; dmas = <&dmamux1 55 0x400 0x1>, @@ -260,6 +268,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40004000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM6_K>; clock-names = "int"; dmas = <&dmamux1 69 0x400 0x1>; @@ -278,6 +288,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40005000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM7_K>; clock-names = "int"; dmas = <&dmamux1 70 0x400 0x1>; @@ -296,6 +308,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40006000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM12_K>; clock-names = "int"; status = "disabled"; @@ -318,6 +332,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40007000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM13_K>; clock-names = "int"; status = "disabled"; @@ -340,6 +356,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40008000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM14_K>; clock-names = "int"; status = "disabled"; @@ -623,6 +641,11 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44000000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; clocks = <&rcc TIM1_K>; clock-names = "int"; dmas = <&dmamux1 11 0x400 0x1>, @@ -659,6 +682,11 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44001000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; clocks = <&rcc TIM8_K>; clock-names = "int"; dmas = <&dmamux1 47 0x400 0x1>, @@ -746,6 +774,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44006000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM15_K>; clock-names = "int"; dmas = <&dmamux1 105 0x400 0x1>, @@ -773,6 +803,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44007000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM16_K>; clock-names = "int"; dmas = <&dmamux1 109 0x400 0x1>, @@ -797,6 +829,8 @@ #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x44008000 0x400>; + interrupts = ; + interrupt-names = "global"; clocks = <&rcc TIM17_K>; clock-names = "int"; dmas = <&dmamux1 111 0x400 0x1>, -- cgit From a118ba387595ee7082f6da08fabbd22ac5b0957d Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 23 Aug 2022 18:25:17 +0530 Subject: ARM: dts: stm32: Fix typo in license text for Engicam boards Fix the Amarula Solutions typo mistake in license text added in below commits. commit <3ff0810ffc479> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF") commit <6ca2898df59f7> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0") commit ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit") commit <30f9a9da4ee13> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM") commit <1d278204cbaa1> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF") commit ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board") commit <0be81dfaeaf89> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM") Signed-off-by: Jagan Teki Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 2 +- arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts | 2 +- arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts | 2 +- arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi | 2 +- arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts | 2 +- arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts | 2 +- arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts index 2a2829283456..9a2a4bc7d079 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts index 1f75f1d45181..60ce4425a7fd 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts index ba92d7d8ed00..390ee8c05754 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi index 01166ccacf2b..9de893101b40 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts index fae656edd820..0d7560ba2950 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts index b9d0d3d6ad15..d949559be020 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi index 0b85175f151e..fb4600a59869 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) STMicroelectronics 2019 - All Rights Reserved * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { -- cgit From ea99a5a02ebca63b00a1676f1dd4f75b899fd51e Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 23 Aug 2022 09:58:49 +0200 Subject: ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi. In the case we want to use transfer_one() API to communicate with a SPI device, chip select signal must be driven individually. Signed-off-by: Patrice Chotard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 50 +++++++++++++++++++++----------- arch/arm/boot/dts/stm32mp157c-ev1.dts | 12 ++++++-- 2 files changed, 43 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 2cc9341d43d2..a9d2bec99014 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1261,7 +1261,7 @@ }; qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { + pins { pinmux = , /* QSPI_BK1_IO0 */ , /* QSPI_BK1_IO1 */ , /* QSPI_BK1_IO2 */ @@ -1270,12 +1270,6 @@ drive-push-pull; slew-rate = <1>; }; - pins2 { - pinmux = ; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; }; qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { @@ -1283,13 +1277,12 @@ pinmux = , /* QSPI_BK1_IO0 */ , /* QSPI_BK1_IO1 */ , /* QSPI_BK1_IO2 */ - , /* QSPI_BK1_IO3 */ - ; /* QSPI_BK1_NCS */ + ; /* QSPI_BK1_IO3 */ }; }; qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { + pins { pinmux = , /* QSPI_BK2_IO0 */ , /* QSPI_BK2_IO1 */ , /* QSPI_BK2_IO2 */ @@ -1298,7 +1291,34 @@ drive-push-pull; slew-rate = <1>; }; - pins2 { + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + ; /* QSPI_BK2_IO3 */ + }; + }; + + qspi_cs1_pins_a: qspi-cs1-0 { + pins { + pinmux = ; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 { + pins { + pinmux = ; /* QSPI_BK1_NCS */ + }; + }; + + qspi_cs2_pins_a: qspi-cs2-0 { + pins { pinmux = ; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; @@ -1306,13 +1326,9 @@ }; }; - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 { pins { - pinmux = , /* QSPI_BK2_IO0 */ - , /* QSPI_BK2_IO1 */ - , /* QSPI_BK2_IO2 */ - , /* QSPI_BK2_IO3 */ - ; /* QSPI_BK2_NCS */ + pinmux = ; /* QSPI_BK2_NCS */ }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index d142dd30e16b..050c3c27a420 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -255,8 +255,16 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a + &qspi_bk2_pins_a + &qspi_cs2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a + &qspi_bk2_sleep_pins_a + &qspi_cs2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; -- cgit From 04c26c5a2da8591fe7e37146592d907ef37492bd Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 24 Aug 2022 10:21:28 +0200 Subject: ARM: dts: stm32: argon: remove spidev node Commit 956b200a846e ("spi: spidev: Warn loudly if instantiated from DT as "spidev"") states that there should not be spidev nodes in DTs. Remove this non-HW description. There won't be a regression because it won't bind since 2015 anyhow. Fixes: 16e3e44c5b87 ("ARM: dts: stm32: Add support for the emtrion emSBC-Argon") Cc: Reinhold Mueller Signed-off-by: Wolfram Sang Reviewed-by: Krzysztof Kozlowski Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index ac53ee3c496b..30156b7546ed 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -435,12 +435,6 @@ pinctrl-0 = <&spi1_pins_a>; cs-gpios = <&gpioz 3 0>; status = "disabled"; - - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <100000>; - }; }; &timers1 { -- cgit From 5fc6b1b62639c764e6e7e261f384d2fb47eff39b Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Thu, 1 Sep 2022 19:43:27 +0530 Subject: arm64: dts: ti: Introduce AM62A7 family of SoCs The AM62A SoC belongs to the K3 Multicore SoC architecture platform that can run edge AI applications with Video/Vision processing. This provides advanced system integration with high security support to enable a broad set of applications in industrial/automotive markets such as, driver monitoring, machine vision, smart camera, eMirror, front camera, robotics, and building automation. Some highlights of AM62A SoC are: * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. Dual/Single core variants are provided in the same package to allow HW compatible designs. * One Device manager Cortex-R5F for system power and resource management, and one Cortex-R5F for Functional Safety or general-purpose usage. * One AI accelerator (up to 2 TOPS), using one C7x256V DSP w/Matrix Multiplier accelerator (MMA) for Deep Learning usage. * VPAC3L(Vision Pre-processing Accelerator), providing 12-bit ISP up to 315MPixel/s RGB+IR support, and Noise Filter for improved integrated imaging and vision image processing. * H.264/H.265 Video Encode/Decode. + Motion JPEG encode * Display support, providing 24-bit RBG parallel interface up to 200MHz pixel clock support for 2K display resolution. * Integrated Giga-bit Ethernet switch supporting up to a total of two external ports (TSN capable). * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for NAND/FPGA connection, OSPI memory controller, 3x McASP for audio, 1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals. * Dedicated Centralized Hardware Security Module with support for secure boot, debug security and crypto acceleration and trusted execution environment * One 32 bit DDR Subsystem that supports LPDDR4, DDR4 memory types. * Multiple low power modes support, ex: Deep sleep, Standby, MCU-only, enabling battery powered system design. More details about the SoCs can be found in the Technical Reference Manual: https://www.ti.com/lit/zip/spruj16 Co-developed-by: Bryan Brattlof Signed-off-by: Bryan Brattlof Signed-off-by: Vignesh Raghavendra Tested-by: Devarsh Thakkar Link: https://lore.kernel.org/r/20220901141328.899100-5-vigneshr@ti.com --- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 298 ++++++++++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 39 ++++ arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 54 +++++ arch/arm64/boot/dts/ti/k3-am62a.dtsi | 122 ++++++++++++ arch/arm64/boot/dts/ti/k3-am62a7.dtsi | 103 ++++++++++ 5 files changed, 616 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62a.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi new file mode 100644 index 000000000000..bc4b50bcd177 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A SoC Family Main Domain peripherals + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + oc_sram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x70000000 0x10000>; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = ; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + main_conf: syscon@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00100000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x20000>; + }; + + dmss: bus@48000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>; + + ti,sci-dev-id = <25>; + + secure_proxy_main: mailbox@4d000000 { + compatible = "ti,am654-secure-proxy"; + reg = <0x00 0x4d000000 0x00 0x80000>, + <0x00 0x4a600000 0x00 0x80000>, + <0x00 0x4a400000 0x00 0x80000>; + reg-names = "target_data", "rt", "scfg"; + #mbox-cells = <1>; + interrupt-names = "rx_012"; + interrupts = ; + }; + }; + + dmsc: system-controller@44043000 { + compatible = "ti,k2g-sci"; + reg = <0x00 0x44043000 0x00 0xfe0>; + reg-names = "debug_messages"; + ti,host-id = <12>; + mbox-names = "rx", "tx"; + mboxes= <&secure_proxy_main 12>, + <&secure_proxy_main 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + main_pmx0: pinctrl@f4000 { + compatible = "pinctrl-single"; + reg = <0x00 0xf4000 0x00 0x2ac>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 154 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 155 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 156 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 158 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_i2c0: i2c@20000000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20000000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c1: i2c@20010000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20010000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c2: i2c@20020000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20020000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c3: i2c@20030000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20030000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <3>; + ti,interrupt-ranges = <0 32 16>; + status = "disabled"; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <190>, <191>, <192>, + <193>, <194>, <195>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <87>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 77 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <180>, <181>, <182>, + <183>, <184>, <185>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <88>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 78 0>; + clock-names = "gpio"; + status = "disabled"; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>; + interrupts = ; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,trm-icp = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + bus-width = <4>; + no-1-8-v; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi new file mode 100644 index 000000000000..6d1e501b94ab --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM625 SoC Family MCU Domain peripherals + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu { + mcu_pmx0: pinctrl@4084000 { + compatible = "pinctrl-single"; + reg = <0x00 0x04084000 0x00 0x88>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + status = "disabled"; + }; + + mcu_uart0: serial@4a00000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x04a00000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + mcu_i2c0: i2c@4900000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x04900000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 106 2>; + clock-names = "fck"; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi new file mode 100644 index 000000000000..99afac40e8d4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_wakeup { + wkup_conf: syscon@43000000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x43000000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; + }; + + wkup_uart0: serial@2b300000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x2b300000 0x00 0x100>; + interrupts = ; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + wkup_i2c0: i2c@2b200000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x02b200000 0x00 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 4>; + clock-names = "fck"; + status = "disabled"; + }; + + wkup_rtc0: rtc@2b1f0000 { + compatible = "ti,am62-rtc"; + reg = <0x00 0x2b1f0000 0x00 0x100>; + interrupts = ; + clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; + clock-names = "vbus", "osc32k"; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + wakeup-source; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi new file mode 100644 index 000000000000..6eb87c3f9f3c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A SoC Family + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include +#include +#include +#include +#include + +/ { + model = "Texas Instruments K3 AM62A SoC"; + compatible = "ti,am62a7"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = , /* cntpsirq */ + , /* cntpnsirq */ + , /* cntvirq */ + ; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + cbass_main: bus@f0000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */ + <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ + <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ + <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ + <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ + <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ + <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */ + <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ + <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ + <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ + <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ + <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ + <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /* C7x_0 */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ + + /* MCU Domain Range */ + <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU R5 IRAM0 */ + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /* MCU R5 IRAM1 */ + + /* Wakeup Domain Range */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM */ + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM */ + + cbass_mcu: bus@4000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */ + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */ + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */ + }; + + cbass_wakeup: bus@b00000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */ + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/ + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-am62a-main.dtsi" +#include "k3-am62a-mcu.dtsi" +#include "k3-am62a-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi new file mode 100644 index 000000000000..331d89fda29d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62A7 SoC family in Quad core configuration + * + * TRM: https://www.ti.com/lit/zip/spruj16 + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62a.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <512>; + }; +}; -- cgit From 38c4a08c820cd2483750a68f2bf84c3665fe6137 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Thu, 1 Sep 2022 19:43:28 +0530 Subject: arm64: dts: ti: Add support for AM62A7-SK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit AM62A StarterKit (SK) board is a low cost, small form factor board designed for TI’s AM62A7 SoC. It supports the following interfaces: * 2 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 HDMI Port with audio * x1 Headphone Jack * x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port * x1 UHS-1 capable µSD card slot * M.2 SDIO Wifi + UART slot * 1Gb OSPI NAND flash * x4 UART through UART-USB bridge * XDS110 for onboard JTAG debug using USB * Temperature sensors, user push buttons and LEDs * 40-pin User Expansion Connector * 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO) * 20-pin header for Programmable Realtime Unit (PRU) IO pins * 40-pin CSI header Add basic support for AM62A7-SK. Schematics: https://www.ti.com/lit/zip/sprr459 Co-developed-by: Bryan Brattlof Signed-off-by: Bryan Brattlof Signed-off-by: Vignesh Raghavendra Tested-by: Devarsh Thakkar Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220901141328.899100-6-vigneshr@ti.com --- arch/arm64/boot/dts/ti/Makefile | 2 + arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 223 ++++++++++++++++++++++++++++++++ 2 files changed, 225 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 02e5d80344d0..4555a5be2257 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -23,3 +23,5 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb + +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts new file mode 100644 index 000000000000..576dbce80ad8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AM62A SK: https://www.ti.com/lit/zip/sprr459 + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include +#include +#include "k3-am62a7.dtsi" + +/ { + compatible = "ti,am62a7-sk", "ti,am62a7"; + model = "Texas Instruments AM62A7 SK"; + + aliases { + serial2 = &main_uart0; + mmc1 = &sdhci1; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0x01e00000>; + no-map; + }; + }; + + vmain_pd: regulator-0 { + /* TPS25750 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_5v0: regulator-1 { + /* Output of TPS63070 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sys: regulator-2 { + /* output of LM5141-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62a-sk:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ + AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ + AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ + AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ + AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ + AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ + >; + }; + + usr_led_pins_default: usr-led-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ + >; + }; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "BT_EN_SOC", "MMC1_SD_EN", + "VPP_EN", "EXP_PS_3V3_En", + "EXP_PS_5V0_En", "EXP_HAT_DETECT", + "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", + "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC", + "GPIO_HDMI_RSTn", "CSI_GPIO0", + "CSI_GPIO1", "WLAN_ALERTn", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "UART1_FET_SEL", + "PD_I2C_IRQ", "IO_EXP_TEST_LED"; + }; +}; + +&sdhci1 { + /* SD/MMC */ + status = "okay"; + vmmc-supply = <&vdd_mmc1>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_gpio_intr { + status = "okay"; +}; + +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; -- cgit From 3accba70e2389a47f42ffb5e900d01b7960dea9e Mon Sep 17 00:00:00 2001 From: Jimmy Chen Date: Tue, 26 Jul 2022 17:45:48 +0800 Subject: arm64: dts: qcom: sc7280: Add herobrine-villager-r1 This adds sc7280-herobrine-villager-r1.dts for villager device tree files. Herobrine-r1 is exactly the same as -r0 except that it uses a different audio solution (it uses the same one as the CRD). Signed-off-by: Jimmy Chen Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/SG2PR03MB500667CFE3F5F59585F8BA77CC949@SG2PR03MB5006.apcprd03.prod.outlook.com --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts | 4 ++-- arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts | 14 ++++++++++++++ 3 files changed, 17 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f4126f7e7640..994ce964ce98 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts index 2cacafd8faa8..cbd8a2d1ef2a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -10,8 +10,8 @@ #include "sc7280-herobrine.dtsi" / { - model = "Google Villager (rev0+)"; - compatible = "google,villager", "qcom,sc7280"; + model = "Google Villager (rev0)"; + compatible = "google,villager-rev0", "qcom,sc7280"; }; /* diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts new file mode 100644 index 000000000000..c03b3ae4de50 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine-villager-r0.dts" +#include "sc7280-herobrine-audio-wcd9385.dtsi" + +/ { + model = "Google Villager (rev1+)"; + compatible = "google,villager", "qcom,sc7280"; +}; -- cgit From d42fae738f3ac58cb8ba1fcd48510a40b57a3155 Mon Sep 17 00:00:00 2001 From: Jimmy Chen Date: Tue, 26 Jul 2022 17:45:49 +0800 Subject: arm64: dts: qcom: Add LTE SKUs for sc7280-villager family This adds LTE skus for villager device tree files. Signed-off-by: Jimmy Chen Reviewed-by: Douglas Anderson Reviewed-by: Sibi Sankar Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/SG2PR03MB5006B0C3E57803E3B1E0EDBCCC949@SG2PR03MB5006.apcprd03.prod.outlook.com --- arch/arm64/boot/dts/qcom/Makefile | 2 ++ arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 11 ----------- arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 + .../boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 + arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 17 +++++++++++++++++ .../boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++ .../boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 + 8 files changed, 50 insertions(+), 11 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 994ce964ce98..68a172c4c748 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -107,7 +107,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index cfe2741456a1..25f31c81b2b7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -83,17 +83,6 @@ }; }; -/* Modem setup is different on Chrome setups than typical Qualcomm setup */ -&remoteproc_mpss { - status = "okay"; - compatible = "qcom,sc7280-mss-pil"; - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; - memory-region = <&mba_mem>, <&mpss_mem>; - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; -}; - &remoteproc_wpss { status = "okay"; firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index bc795c480352..7a14bad9c23e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -9,6 +9,7 @@ #include "sc7280-herobrine.dtsi" #include "sc7280-herobrine-audio-wcd9385.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index c1647a85a371..c1a671968725 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Google Herobrine (rev1+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi new file mode 100644 index 000000000000..a92eeccd2b2a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine dts fragment for LTE SKUs + * + * Copyright 2022 Google LLC. + */ +/* Modem setup is different on Chrome setups than typical Qualcomm setup */ + +&remoteproc_mpss { + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + memory-region = <&mba_mem>, <&mpss_mem>; + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts new file mode 100644 index 000000000000..672cb78e3088 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine-villager-r0.dts" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Villager (rev0) with LTE"; + compatible = "google,villager-rev0-sku0", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts new file mode 100644 index 000000000000..2f05a19cc388 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine-villager-r1.dts" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Villager (rev1+) with LTE"; + compatible = "google,villager-sku0", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index e2e37a0292ad..7559164cdda0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -10,6 +10,7 @@ #include #include "sc7280-idp.dtsi" #include "pmr735a.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; -- cgit From 12ef689f09abb50f0862c8e08138dd45cbf27233 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:53 +0530 Subject: arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with external codecs using soundwire masters. Add these nodes for sc7280 based platforms audio use case. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-2-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 128 +++++++++++++++++++++++++++++++++++ 1 file changed, 128 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index aa20a4e91b2c..36041b407822 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2180,6 +2180,114 @@ #clock-cells = <1>; }; + lpass_rx_macro: codec@3200000 { + compatible = "qcom,sc7280-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr0: soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + + interrupts = ; + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_tx_macro: codec@3220000 { + compatible = "qcom,sc7280-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr1: soundwire@3230000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03230000 0 0x2000>; + + interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_tx_macro>; + clock-names = "iface"; + + qcom,din-ports = <3>; + qcom,dout-ports = <0>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; + qcom,port-offset = <1>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + lpass_audiocc: clock-controller@3300000 { compatible = "qcom,sc7280-lpassaudiocc"; reg = <0 0x03300000 0 0x30000>; @@ -2192,6 +2300,26 @@ #reset-cells = <1>; }; + lpass_va_macro: codec@3370000 { + compatible = "qcom,sc7280-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; + clock-names = "mclk"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + lpass_aon: clock-controller@3380000 { compatible = "qcom,sc7280-lpassaoncc"; reg = <0 0x03380000 0 0x30000>; -- cgit From d3219de8bcebe4057696a2f99ce90c8812114c78 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:54 +0530 Subject: arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Enable rx, tx and va macro codecs and soundwire nodes on revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-3-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 0c48db69e1ef..4d4096400f1b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -246,6 +246,19 @@ modem-init; }; +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + &pcie1 { status = "okay"; perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; @@ -306,6 +319,28 @@ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay"; -- cgit From d5a959f96be1b27c81d6197d66624cd6cc146fe6 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:55 +0530 Subject: arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Enable rx, tx and va macro codecs and soundwire nodes for CRD rev5+ (aka CRD 3.0/3.1) boards. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-4-git-send-email-quic_srivasam@quicinc.com --- .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 22 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index 859faaa8b7e0..1c0bb7c505af 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -5,6 +5,28 @@ * Copyright (c) 2022, The Linux Foundation. All rights reserved. */ +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&swr0 { + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + /* PINCTRL */ &lpass_dmic01_clk { diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7cd91df7a118..85d351e0e89f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -310,6 +310,10 @@ modem-init; }; +&lpass_va_macro { + vdd-micb-supply = <&vreg_bob>; +}; + /* NOTE: Not all Qcards have eDP connector stuffed */ &mdss_edp { aux-bus { @@ -379,6 +383,24 @@ no-sdio; }; +&swr0 { + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + #sound-dai-cells = <1>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + #sound-dai-cells = <1>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + uart_dbg: &uart5 { compatible = "qcom,geni-debug-uart"; status = "okay"; -- cgit From f8b4eb64f2003e0a1fa5011009955d46f90af285 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:56 +0530 Subject: arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Add wcd9385 codec node for audio use case on sc7280 based platforms of revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards. Add tlmm gpio property for switching CTIA/OMTP Headset. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-5-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 14 ++++++++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 41 ++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 344338ad8a01..9c212072d419 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -87,6 +87,13 @@ ap_ts_pen_1v8: &i2c13 { pins = "gpio51"; }; +&wcd9385 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + &tlmm { tp_int_odl: tp-int-odl { pins = "gpio7"; @@ -105,4 +112,11 @@ ap_ts_pen_1v8: &i2c13 { function = "gpio"; bias-disable; }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 4d4096400f1b..5429a154f7b4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -20,6 +20,34 @@ serial1 = &uart7; }; + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -670,4 +698,17 @@ function = "gpio"; bias-pull-down; }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; -- cgit From 0a3a56a93fd96cb3e3d42778f275e91750c242a7 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:57 +0530 Subject: arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Add wcd9385 codec node for audio use case on CRD rev5+ (aka CRD 3.0/3.1) boards. Add tlmm gpio property for switching CTIA/OMTP Headset. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-6-git-send-email-quic_srivasam@quicinc.com --- .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 4 ++ arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 51 ++++++++++++++++++++++ 2 files changed, 55 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index 1c0bb7c505af..6dfd49735108 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -27,6 +27,10 @@ status = "okay"; }; +&wcd9385 { + status = "okay"; +}; + /* PINCTRL */ &lpass_dmic01_clk { diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 85d351e0e89f..b2efc7f489af 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -31,6 +31,37 @@ wifi0 = &wifi; }; + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; + pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + pm8350c_pwm_backlight: backlight { compatible = "pwm-backlight"; status = "disabled"; @@ -632,4 +663,24 @@ mos_bt_uart: &uart7 { function = "gpio"; drive-strength = <2>; }; + + us_euro_hs_sel: us-euro-hs-sel { + pins = "gpio81"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; -- cgit From d6c006f510d9f29ff78761bb3ef50f14ebc05b7b Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:58 +0530 Subject: arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Add max98360a codec node for audio use case on revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards. Add amp_en node for max98360a codec pin control. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-7-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 5429a154f7b4..ce8ea4567eed 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -20,6 +20,14 @@ serial1 = &uart7; }; + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + wcd9385: audio-codec-1 { compatible = "qcom,wcd9385-codec"; pinctrl-names = "default", "sleep"; @@ -613,6 +621,12 @@ }; &tlmm { + amp_en: amp-en { + pins = "gpio63"; + bias-pull-down; + drive-strength = <2>; + }; + bt_en: bt-en { pins = "gpio85"; function = "gpio"; -- cgit From 14afeaf917375967bb84b4347cd8e4156b84c470 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:52:59 +0530 Subject: arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Add max98360a codec node for audio use case on all herobrine boards. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-8-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 45f6a1e1002e..855dca3b5b02 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -296,6 +296,14 @@ /* BOARD-SPECIFIC TOP LEVEL NODES */ + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + pwmleds: pwmleds { compatible = "pwm-leds"; status = "disabled"; -- cgit From aee6873edb93a3919706f70884e55880d8c727a5 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:53:00 +0530 Subject: arm64: dts: qcom: sc7280: Add lpass cpu node Add lpass cpu node for audio on sc7280 based platforms. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-9-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 62 ++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 36041b407822..708c42b00b18 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -22,6 +22,7 @@ #include #include #include +#include #include / { @@ -2341,6 +2342,67 @@ #power-domain-cells = <1>; }; + lpass_cpu: audio@3987000 { + compatible = "qcom,sc7280-lpass-cpu"; + + reg = <0 0x03987000 0 0x68000>, + <0 0x03b00000 0 0x29000>, + <0 0x03260000 0 0xc000>, + <0 0x03280000 0 0x29000>, + <0 0x03340000 0 0x29000>, + <0 0x0336c000 0 0x3000>; + reg-names = "lpass-hdmiif", + "lpass-lpaif", + "lpass-rxtx-cdc-dma-lpm", + "lpass-rxtx-lpaif", + "lpass-va-lpaif", + "lpass-va-cdc-dma-lpm"; + + iommus = <&apps_smmu 0x1820 0>, + <&apps_smmu 0x1821 0>, + <&apps_smmu 0x1832 0>; + + power-domains = <&rpmhpd SC7280_LCX>; + power-domain-names = "lcx"; + required-opps = <&rpmhpd_opp_nom>; + + clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, + <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, + <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; + clock-names = "aon_cc_audio_hm_h", + "audio_cc_ext_mclk0", + "core_cc_sysnoc_mport_core", + "core_cc_ext_if0_ibit", + "core_cc_ext_if1_ibit", + "audio_cc_codec_mem", + "audio_cc_codec_mem0", + "audio_cc_codec_mem1", + "audio_cc_codec_mem2", + "aon_cc_va_mem0"; + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = , + , + , + ; + interrupt-names = "lpass-irq-lpaif", + "lpass-irq-hdmi", + "lpass-irq-vaif", + "lpass-irq-rxtxif"; + + status = "disabled"; + }; + lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; reg = <0 0x3c00000 0 0x28>; -- cgit From 8cf4133bc1fbb6fbc695e4398b940caf3ec59ba5 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:53:01 +0530 Subject: arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards. Enable lpass cpu node and add pin control and dai-links for audio on sc7280 based platforms of revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-10-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ce8ea4567eed..c228db81c7b2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -282,6 +282,34 @@ modem-init; }; +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = ; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = ; + }; + + dai-link@6 { + reg = ; + }; + + dai-link@19 { + reg = ; + }; + + dai-link@25 { + reg = ; + }; +}; + &lpass_rx_macro { status = "okay"; }; -- cgit From f10c73ac6e90ca2343fc4f06b61ce8c1824c9bfd Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:53:02 +0530 Subject: arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Enable lpass cpu node and add pin control and dai-links for audio on sc7280 based platforms of rev5+ (aka CRD 3.0/3.1) boards. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-11-git-send-email-quic_srivasam@quicinc.com --- .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index 6dfd49735108..989a895cdcfd 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -7,6 +7,34 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = ; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = ; + }; + + dai-link@6 { + reg = ; + }; + + dai-link@19 { + reg = ; + }; + + dai-link@25 { + reg = ; + }; +}; + &lpass_rx_macro { status = "okay"; }; -- cgit From ece7d81f2447f4fd4f5d5345e921036871babf2b Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:53:03 +0530 Subject: arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Add dt nodes for sound card support on revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards, which is using WCD9385 headset playback, capture, I2S speaker playback and DMICs via VA macro. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-12-git-send-email-quic_srivasam@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 +++++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 98 ++++++++++++++++++++++++++++++ 2 files changed, 121 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 9c212072d419..dddb505e220b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 { pins = "gpio51"; }; +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; + &wcd9385 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index c228db81c7b2..e0a2dc9ce036 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -85,6 +85,104 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_pwren>; }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; }; &apps_rsc { -- cgit From 29e0b604f040ef794cd36d43b97bd9c040ed99e6 Mon Sep 17 00:00:00 2001 From: Srinivasa Rao Mandadapu Date: Thu, 7 Jul 2022 18:53:04 +0530 Subject: arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Add dt nodes for sound card support on rev5+ (aka CRD 3.0/3.1) boards, which is using WCD9385 headset playback, capture, I2S speaker playback and DMICs via VA macro. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1657200184-29565-13-git-send-email-quic_srivasam@quicinc.com --- .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 101 +++++++++++++++++++++ 1 file changed, 101 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index 989a895cdcfd..c72e53aaf997 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -5,6 +5,107 @@ * Copyright (c) 2022, The Linux Foundation. All rights reserved. */ +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &lpass_cpu { -- cgit From 61a301ca83736afeeeb307b931c59f107067da3c Mon Sep 17 00:00:00 2001 From: Judy Hsiao Date: Fri, 26 Aug 2022 06:56:21 +0000 Subject: arm64: dts: qcom: sc7280: Fix Dmic no sound on villager-r1 Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the DMIC power source to match the hardware schematic. This patch: 1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator. 2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply setting. Co-developed-by: Srinivasa Rao Mandadapu Signed-off-by: Srinivasa Rao Mandadapu Signed-off-by: Judy Hsiao Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220826065621.2255795-1-judyhsiao@chromium.org --- .../boot/dts/qcom/sc7280-herobrine-villager-r1.dts | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts index c03b3ae4de50..fd202a8f6a33 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -12,3 +12,30 @@ model = "Google Villager (rev1+)"; compatible = "google,villager", "qcom,sc7280"; }; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; -- cgit From affa747d36aa81b2285fe0221e2624b0afaa3482 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 13 Sep 2022 15:28:44 +0200 Subject: ARM: dts: qcom: msm8660: Add GSBI1 SPI bus GSBI1 can be used to enable an external SPI bus on e.g. the APQ8060. On the DragonBoard APQ8060 this SPI bus is used to talk to the LCD display. Signed-off-by: Linus Walleij [bjorn: Moved status properties last] Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220913132846.305716-1-linus.walleij@linaro.org --- arch/arm/boot/dts/qcom-msm8660.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 63a501c63cf8..65f71cf2d5d7 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -131,6 +131,32 @@ reg = <0x900000 0x4000>; }; + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16080000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + gsbi6: gsbi@16500000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <12>; -- cgit From 77012a11c36e4609f2c0e0ff0bf215a8448d9033 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 13 Sep 2022 15:28:45 +0200 Subject: ARM: dts: qcom: msm8660: Add GSBI3 I2C bus GSBI3 can be used to enable an external I2C bus on e.g. the APQ8060. On the DragonBoard APQ8060 this I2C bus is used to talk to the Cypress CY8CTMA340 CYTTSP touchscreen. Signed-off-by: Linus Walleij Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220913132846.305716-2-linus.walleij@linaro.org --- arch/arm/boot/dts/qcom-msm8660.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 65f71cf2d5d7..fd7751d4d886 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -157,6 +157,31 @@ }; }; + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + status = "disabled"; + + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + gsbi6: gsbi@16500000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <12>; -- cgit From 2aac1179717d2bf7ed2747a823c104c918d37a80 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 13 Sep 2022 15:28:46 +0200 Subject: ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard This adds the CY8CTMA340 Touchscreen to the APQ8060 DragonBoard. Tested without display by issuing cat /dev/input/input/event3 which produces appropriate noise and interrupts on the dedicated GPIO line. Signed-off-by: Linus Walleij Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220913132846.305716-3-linus.walleij@linaro.org --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 71 +++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 70a1dd629c7a..573e4dc66bb0 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -159,6 +159,19 @@ }; }; + dragon_gsbi3_i2c_pins: gsbi3_i2c { + mux { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + }; + pinconf { + pins = "gpio43", "gpio44"; + drive-strength = <8>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + }; + dragon_gsbi8_i2c_pins: gsbi8_i2c { mux { pins = "gpio64", "gpio65"; @@ -240,6 +253,22 @@ bias-pull-up; }; }; + + dragon_tma340_gpios: tma340 { + reset { + /* RESET line, TS_ATTN, WAKE_CTP */ + pins = "gpio58"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + irq { + pins = "gpio61"; /* IRQ line */ + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; qcom,ssbi@500000 { @@ -444,6 +473,45 @@ }; }; + gsbi@16200000 { + qcom,mode = ; + status = "okay"; + + gsbi3_i2c: i2c@16280000 { + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi3_i2c_pins>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,cy8ctma340"; + reg = <0x24>; + /* Certainly we can do at least 400 kHz */ + clock-frequency = <400000>; + /* IRQ on GPIO61 called /CTP_INT */ + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_EDGE_FALLING>; + /* + * The I2C bus is using a PCA9306 level translator from L16A + * to L2B so these two voltages are needed and L16A is + * kind of the IO voltage, however L16Aisn't really fed to + * the TMA340, which relies entirely on L2B (PM8901 L2). + */ + vcpin-supply = <&pm8058_l16>; + vdd-supply = <&pm8901_l2>; + /* GPIO58, called WAKE_CTP */ + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_tma340_gpios>; + }; + }; + }; + gsbi@19800000 { status = "okay"; qcom,mode = ; @@ -634,7 +702,8 @@ bias-pull-down; }; l2 { - regulator-min-microvolt = <2850000>; + /* TMA340 requires strictly 3.3V */ + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; -- cgit From d86a1c69bd9a4d6859293cd0ecebfa692f6a3150 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:50 +0200 Subject: arm64: dts: mediatek: cherry: Enable the System Companion Processor MT8195 features a SCP like some other older SoCs, and Cherry uses it for various tasks. Add the required pin configuration and DMA pool and enable the node. Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220902081156.38526-2-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index fcc600674339..e83d58d99757 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -104,6 +104,18 @@ enable-active-high; regulator-always-on; }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; }; &i2c0 { @@ -600,6 +612,14 @@ }; }; + scp_pins: scp-default-pins { + pins-vreq { + pinmux = ; + bias-disable; + input-enable; + }; + }; + spi0_pins: spi0-default-pins { pins-cs-mosi-clk { pinmux = , @@ -643,6 +663,15 @@ interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; }; +&scp { + status = "okay"; + + firmware-name = "mediatek/mt8195/scp.img"; + memory-region = <&scp_mem>; + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; +}; + &spi0 { status = "okay"; -- cgit From e775cc1a9b4fb9b7b62edc480642ebd21e3b81e1 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:51 +0200 Subject: arm64: dts: mediatek: cherry: Wire up the ChromeOS Embedded Controller Wire up the ChromeOS Embedded Controller on SPI0 and its communication channel via SCP RPMSG along with all of the offered functionality, including Keyboard, Smart Battery Metrics (SBS), keyboard backlight, I2C tunnel, regulators and Type-C connector management. Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220902081156.38526-3-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 77 +++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index e83d58d99757..73f531f84fa2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -426,6 +426,14 @@ "AP_SPI_FLASH_MOSI", "AP_SPI_FLASH_MISO"; + cros_ec_int: cros-ec-irq-default-pins { + pins-ec-ap-int-odl { + pinmux = ; + bias-pull-up = ; + input-enable; + }; + }; + i2c0_pins: i2c0-default-pins { pins-bus { pinmux = , @@ -670,6 +678,11 @@ memory-region = <&scp_mem>; pinctrl-names = "default"; pinctrl-0 = <&scp_pins>; + + cros-ec-rpmsg { + compatible = "google,cros-ec-rpmsg"; + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; }; &spi0 { @@ -678,6 +691,67 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; mediatek,pad-select = <0>; + + cros_ec: ec@0 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts-extended = <&pio 4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cros_ec_int>; + spi-max-frequency = <3000000>; + + keyboard-backlight { + compatible = "google,cros-kbd-led-backlight"; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mt_pmic_vmc_ldo_reg: regulator@0 { + compatible = "google,cros-ec-regulator"; + reg = <0>; + regulator-name = "mt_pmic_vmc_ldo"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + mt_pmic_vmch_ldo_reg: regulator@1 { + compatible = "google,cros-ec-regulator"; + reg = <1>; + regulator-name = "mt_pmic_vmch_ldo"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; }; &u3phy0 { @@ -729,3 +803,6 @@ vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; + +#include +#include -- cgit From 63ce81b224dd8033fd5f629fb4581a26eedd5797 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:52 +0200 Subject: arm64: dts: mediatek: cherry: Add Google Security Chip (GSC) TPM Add support for the Cr50 Google Security Chip (GSC) found on this platform on I2C3 to support TPM and to also use it as an entropy source for the kernel. Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220902081156.38526-4-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 73f531f84fa2..a07e7fe66315 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -149,6 +149,14 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&cr50_int>; + }; }; &i2c4 { @@ -426,6 +434,13 @@ "AP_SPI_FLASH_MOSI", "AP_SPI_FLASH_MISO"; + cr50_int: cr50-irq-default-pins { + pins-gsc-ap-int-odl { + pinmux = ; + input-enable; + }; + }; + cros_ec_int: cros-ec-irq-default-pins { pins-ec-ap-int-odl { pinmux = ; -- cgit From 824fae69f53b914b30fb279ae73d04dd35df432a Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:53 +0200 Subject: arm64: dts: mediatek: cherry: Add keyboard mapping for the top row Chromebooks' embedded keyboards differ from standard layouts for the top row, as this one doesn't have the standard function keys but shortcuts instead: map these keys to achieve the functionality that is pictured on the printouts. Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Chen-Yu Tsai Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220902081156.38526-5-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 30 +++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index a07e7fe66315..1174ab344e47 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -821,3 +821,33 @@ #include #include + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; -- cgit From 07984e82ae3b8cf09a8d3d78b6a691f275d38036 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:54 +0200 Subject: arm64: dts: mediatek: cherry: Enable secondary SD/MMC controller As of now, all of the boards based on the cherry platform have a usable secondary SD/MMC controller, usually for SD cards: enable it to allow both booting from it and generally accessing external storage. Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220902081156.38526-6-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 45 +++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 1174ab344e47..0654a28e6782 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -17,6 +17,7 @@ i2c5 = &i2c5; i2c7 = &i2c7; mmc0 = &mmc0; + mmc1 = &mmc1; serial0 = &uart0; }; @@ -227,6 +228,24 @@ vqmmc-supply = <&mt6359_vufs_ldo_reg>; }; +&mmc1 { + status = "okay"; + + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&pio 54 GPIO_ACTIVE_LOW>; + max-frequency = <200000000>; + no-mmc; + no-sdio; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>, <&mmc1_pins_detect>; + pinctrl-1 = <&mmc1_pins_default>; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&mt_pmic_vmch_ldo_reg>; + vqmmc-supply = <&mt_pmic_vmc_ldo_reg>; +}; + /* for CPU-L */ &mt6359_vcore_buck_reg { regulator-always-on; @@ -575,6 +594,32 @@ }; }; + mmc1_pins_detect: mmc1-detect-pins { + pins-insert { + pinmux = ; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1-default-pins { + pins-cmd-dat { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = <8>; + bias-pull-up = ; + }; + + pins-clk { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + }; + nor_pins_default: nor-default-pins { pins-ck-io { pinmux = , -- cgit From b53f37249cfa4e2e0caacdc72f4a8dfdb8574419 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:55 +0200 Subject: arm64: dts: mediatek: cherry: Enable Elantech eKTH3000 i2c trackpad The Cherry platform uses an Elantech touchpad/trackpad: enable probing it at address 0x15 on I2C1. Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Chen-Yu Tsai Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220902081156.38526-7-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 0654a28e6782..ee59619068d9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -134,6 +134,16 @@ i2c-scl-internal-delay-ns = <12500>; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupts-extended = <&pio 6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + vcc-supply = <&pp3300_s3>; + wakeup-source; + }; }; &i2c2 { @@ -710,6 +720,14 @@ }; }; + trackpad_pins: trackpad-default-pins { + pins-int-n { + pinmux = ; + input-enable; + bias-pull-up; + }; + }; + touchscreen_pins: touchscreen-default-pins { pins-int-n { pinmux = ; -- cgit From 260c04d425eb8424626b64e164faebeb63c67625 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 2 Sep 2022 10:11:56 +0200 Subject: arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus All machines in the Cherry platform use MT6315 over SPMI: add the two instances, providing Vbcpu and Vgpu regulators. Signed-off-by: AngeloGioacchino Del Regno Tested-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20220902081156.38526-8-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 42 +++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index ee59619068d9..9b62e161db26 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include "mt8195.dtsi" #include "mt6359.dtsi" @@ -832,6 +833,47 @@ }; }; +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-ramp-delay = <6250>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vgpu"; + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-ramp-delay = <6250>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; +}; + &u3phy0 { status = "okay"; }; -- cgit From be24fd19b1b42e0b38e77e0d6a379282bafb6aa6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:40 +0200 Subject: arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-35-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 4 ++-- arch/arm64/boot/dts/qcom/sm6125.dtsi | 10 +++++----- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 0aad2e94e757..6a8b88cc4385 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -87,7 +87,7 @@ }; &sdc2_off_state { - sd-cd { + sd-cd-pins { pins = "gpio98"; drive-strength = <2>; bias-disable; @@ -95,7 +95,7 @@ }; &sdc2_on_state { - sd-cd { + sd-cd-pins { pins = "gpio98"; drive-strength = <2>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 8c582a9e4ada..1fe3fa3ad877 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -387,19 +387,19 @@ #interrupt-cells = <2>; sdc2_off_state: sdc2-off-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; @@ -413,13 +413,13 @@ bias-disable; }; - cmd { + cmd-pins-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; -- cgit From 448f5a002fedb2ff2d19e5a563d3af1ea5e123e1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:41 +0200 Subject: arm64: dts: qcom: sm6350: align TLMM pin configuration with DT schema DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-36-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index d882c29d53aa..c39de7d3ace0 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1314,49 +1314,49 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; - qup_uart9_default: qup-uart9-default { + qup_uart9_default: qup-uart9-default-state { pins = "gpio25", "gpio26"; function = "qup13_f2"; drive-strength = <2>; bias-disable; }; - qup_i2c0_default: qup-i2c0-default { + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio0", "gpio1"; function = "qup00"; drive-strength = <2>; bias-pull-up; }; - qup_i2c2_default: qup-i2c2-default { + qup_i2c2_default: qup-i2c2-default-state { pins = "gpio45", "gpio46"; function = "qup02"; drive-strength = <2>; bias-pull-up; }; - qup_i2c6_default: qup-i2c6-default { + qup_i2c6_default: qup-i2c6-default-state { pins = "gpio13", "gpio14"; function = "qup10"; drive-strength = <2>; bias-pull-up; }; - qup_i2c7_default: qup-i2c7-default { + qup_i2c7_default: qup-i2c7-default-state { pins = "gpio27", "gpio28"; function = "qup11"; drive-strength = <2>; bias-pull-up; }; - qup_i2c8_default: qup-i2c8-default { + qup_i2c8_default: qup-i2c8-default-state { pins = "gpio19", "gpio20"; function = "qup12"; drive-strength = <2>; bias-pull-up; }; - qup_i2c10_default: qup-i2c10-default { + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio4", "gpio5"; function = "qup14"; drive-strength = <2>; -- cgit From c9c53d1f4329564f98ed0decfe3c377c6639ec5d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:42 +0200 Subject: arm64: dts: qcom: sm8350-sagami: correct TS pin property The pin configuration is selected with "pins", not "pin" property. Fixes: 1209e9246632 ("arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-37-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index cb9bbd234b7b..b702ab1605bb 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -223,7 +223,7 @@ gpio-reserved-ranges = <44 4>; ts_int_default: ts-int-default { - pin = "gpio23"; + pins = "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; -- cgit From e227fa2970fd259fa65f97c4defb0b85dffc62d7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:43 +0200 Subject: arm64: dts: qcom: sm8350: align TLMM pin configuration with DT schema DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-38-krzysztof.kozlowski@linaro.org --- .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8350.dtsi | 44 +++++++++++----------- 2 files changed, 23 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index b702ab1605bb..b3c9952ac173 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -222,7 +222,7 @@ &tlmm { gpio-reserved-ranges = <44 4>; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio23"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e72a04411888..cd5503642a23 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1762,150 +1762,150 @@ wakeup-parent = <&pdc>; qup_uart3_default_state: qup-uart3-default-state { - rx { + rx-pins { pins = "gpio18"; function = "qup3"; }; - tx { + tx-pins { pins = "gpio19"; function = "qup3"; }; }; - qup_uart6_default: qup-uart6-default { + qup_uart6_default: qup-uart6-default-state { pins = "gpio30", "gpio31"; function = "qup6"; drive-strength = <2>; bias-disable; }; - qup_uart18_default: qup-uart18-default { + qup_uart18_default: qup-uart18-default-state { pins = "gpio58", "gpio59"; function = "qup18"; drive-strength = <2>; bias-disable; }; - qup_i2c0_default: qup-i2c0-default { + qup_i2c0_default: qup-i2c0-default-state { pins = "gpio4", "gpio5"; function = "qup0"; drive-strength = <2>; bias-pull-up; }; - qup_i2c1_default: qup-i2c1-default { + qup_i2c1_default: qup-i2c1-default-state { pins = "gpio8", "gpio9"; function = "qup1"; drive-strength = <2>; bias-pull-up; }; - qup_i2c2_default: qup-i2c2-default { + qup_i2c2_default: qup-i2c2-default-state { pins = "gpio12", "gpio13"; function = "qup2"; drive-strength = <2>; bias-pull-up; }; - qup_i2c4_default: qup-i2c4-default { + qup_i2c4_default: qup-i2c4-default-state { pins = "gpio20", "gpio21"; function = "qup4"; drive-strength = <2>; bias-pull-up; }; - qup_i2c5_default: qup-i2c5-default { + qup_i2c5_default: qup-i2c5-default-state { pins = "gpio24", "gpio25"; function = "qup5"; drive-strength = <2>; bias-pull-up; }; - qup_i2c6_default: qup-i2c6-default { + qup_i2c6_default: qup-i2c6-default-state { pins = "gpio28", "gpio29"; function = "qup6"; drive-strength = <2>; bias-pull-up; }; - qup_i2c7_default: qup-i2c7-default { + qup_i2c7_default: qup-i2c7-default-state { pins = "gpio32", "gpio33"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_i2c8_default: qup-i2c8-default { + qup_i2c8_default: qup-i2c8-default-state { pins = "gpio36", "gpio37"; function = "qup8"; drive-strength = <2>; bias-pull-up; }; - qup_i2c9_default: qup-i2c9-default { + qup_i2c9_default: qup-i2c9-default-state { pins = "gpio40", "gpio41"; function = "qup9"; drive-strength = <2>; bias-pull-up; }; - qup_i2c10_default: qup-i2c10-default { + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio44", "gpio45"; function = "qup10"; drive-strength = <2>; bias-pull-up; }; - qup_i2c11_default: qup-i2c11-default { + qup_i2c11_default: qup-i2c11-default-state { pins = "gpio48", "gpio49"; function = "qup11"; drive-strength = <2>; bias-pull-up; }; - qup_i2c12_default: qup-i2c12-default { + qup_i2c12_default: qup-i2c12-default-state { pins = "gpio52", "gpio53"; function = "qup12"; drive-strength = <2>; bias-pull-up; }; - qup_i2c13_default: qup-i2c13-default { + qup_i2c13_default: qup-i2c13-default-state { pins = "gpio0", "gpio1"; function = "qup13"; drive-strength = <2>; bias-pull-up; }; - qup_i2c14_default: qup-i2c14-default { + qup_i2c14_default: qup-i2c14-default-state { pins = "gpio56", "gpio57"; function = "qup14"; drive-strength = <2>; bias-disable; }; - qup_i2c15_default: qup-i2c15-default { + qup_i2c15_default: qup-i2c15-default-state { pins = "gpio60", "gpio61"; function = "qup15"; drive-strength = <2>; bias-disable; }; - qup_i2c16_default: qup-i2c16-default { + qup_i2c16_default: qup-i2c16-default-state { pins = "gpio64", "gpio65"; function = "qup16"; drive-strength = <2>; bias-disable; }; - qup_i2c17_default: qup-i2c17-default { + qup_i2c17_default: qup-i2c17-default-state { pins = "gpio72", "gpio73"; function = "qup17"; drive-strength = <2>; bias-disable; }; - qup_i2c19_default: qup-i2c19-default { + qup_i2c19_default: qup-i2c19-default-state { pins = "gpio76", "gpio77"; function = "qup19"; drive-strength = <2>; -- cgit From a73747528867fabea8e285a1b604594181091507 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:44 +0200 Subject: arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-39-krzysztof.kozlowski@linaro.org --- .../dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts | 12 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 152 ++++++++++----------- 2 files changed, 82 insertions(+), 82 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts index 7fe582b92a61..d68765eb6d4f 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -572,27 +572,27 @@ &tlmm { gpio-reserved-ranges = <28 4>; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <16>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <16>; bias-pull-up; }; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio23"; function = "gpio"; drive-strength = <2>; @@ -600,7 +600,7 @@ input-enable; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio92"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d0ebf61a0074..1d878256028f 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2384,20 +2384,20 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; - sdc2_sleep_state: sdc2-sleep { - clk { + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; @@ -2405,21 +2405,21 @@ }; pcie0_default_state: pcie0-default-state { - perst { + perst-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio95"; function = "pcie0_clkreqn"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio96"; function = "gpio"; drive-strength = <2>; @@ -2428,21 +2428,21 @@ }; pcie1_default_state: pcie1-default-state { - perst { + perst-pins { pins = "gpio97"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio98"; function = "pcie1_clkreqn"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio99"; function = "gpio"; drive-strength = <2>; @@ -2450,350 +2450,350 @@ }; }; - qup_i2c0_data_clk: qup-i2c0-data-clk { + qup_i2c0_data_clk: qup-i2c0-data-clk-state { pins = "gpio0", "gpio1"; function = "qup0"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk { + qup_i2c1_data_clk: qup-i2c1-data-clk-state { pins = "gpio4", "gpio5"; function = "qup1"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk { + qup_i2c2_data_clk: qup-i2c2-data-clk-state { pins = "gpio8", "gpio9"; function = "qup2"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk { + qup_i2c3_data_clk: qup-i2c3-data-clk-state { pins = "gpio12", "gpio13"; function = "qup3"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk { + qup_i2c4_data_clk: qup-i2c4-data-clk-state { pins = "gpio16", "gpio17"; function = "qup4"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk { + qup_i2c5_data_clk: qup-i2c5-data-clk-state { pins = "gpio206", "gpio207"; function = "qup5"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk { + qup_i2c6_data_clk: qup-i2c6-data-clk-state { pins = "gpio20", "gpio21"; function = "qup6"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk { + qup_i2c8_data_clk: qup-i2c8-data-clk-state { pins = "gpio28", "gpio29"; function = "qup8"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk { + qup_i2c9_data_clk: qup-i2c9-data-clk-state { pins = "gpio32", "gpio33"; function = "qup9"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk { + qup_i2c10_data_clk: qup-i2c10-data-clk-state { pins = "gpio36", "gpio37"; function = "qup10"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk { + qup_i2c11_data_clk: qup-i2c11-data-clk-state { pins = "gpio40", "gpio41"; function = "qup11"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk { + qup_i2c12_data_clk: qup-i2c12-data-clk-state { pins = "gpio44", "gpio45"; function = "qup12"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk { + qup_i2c13_data_clk: qup-i2c13-data-clk-state { pins = "gpio48", "gpio49"; function = "qup13"; drive-strength = <2>; bias-pull-up; }; - qup_i2c14_data_clk: qup-i2c14-data-clk { + qup_i2c14_data_clk: qup-i2c14-data-clk-state { pins = "gpio52", "gpio53"; function = "qup14"; drive-strength = <2>; bias-pull-up; }; - qup_i2c15_data_clk: qup-i2c15-data-clk { + qup_i2c15_data_clk: qup-i2c15-data-clk-state { pins = "gpio56", "gpio57"; function = "qup15"; }; - qup_i2c16_data_clk: qup-i2c16-data-clk { + qup_i2c16_data_clk: qup-i2c16-data-clk-state { pins = "gpio60", "gpio61"; function = "qup16"; }; - qup_i2c17_data_clk: qup-i2c17-data-clk { + qup_i2c17_data_clk: qup-i2c17-data-clk-state { pins = "gpio64", "gpio65"; function = "qup17"; }; - qup_i2c18_data_clk: qup-i2c18-data-clk { + qup_i2c18_data_clk: qup-i2c18-data-clk-state { pins = "gpio68", "gpio69"; function = "qup18"; }; - qup_i2c19_data_clk: qup-i2c19-data-clk { + qup_i2c19_data_clk: qup-i2c19-data-clk-state { pins = "gpio72", "gpio73"; function = "qup19"; }; - qup_i2c20_data_clk: qup-i2c20-data-clk { + qup_i2c20_data_clk: qup-i2c20-data-clk-state { pins = "gpio76", "gpio77"; function = "qup20"; }; - qup_i2c21_data_clk: qup-i2c21-data-clk { + qup_i2c21_data_clk: qup-i2c21-data-clk-state { pins = "gpio80", "gpio81"; function = "qup21"; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio3"; function = "qup0"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup0"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup1"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup1"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio11"; function = "qup2"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup2"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio15"; function = "qup3"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup3"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio19"; function = "qup4"; drive-strength = <6>; bias-disable; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup4"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio85"; function = "qup5"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio206", "gpio207", "gpio84"; function = "qup5"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio23"; function = "qup6"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup6"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio31"; function = "qup8"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup8"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio35"; function = "qup9"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup9"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio39"; function = "qup10"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup10"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio43"; function = "qup11"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup11"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio47"; function = "qup12"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup12"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio51"; function = "qup13"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup13"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio55"; function = "qup14"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup14"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio59"; function = "qup15"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup15"; }; - qup_spi16_cs: qup-spi16-cs { + qup_spi16_cs: qup-spi16-cs-state { pins = "gpio63"; function = "qup16"; }; - qup_spi16_data_clk: qup-spi16-data-clk { + qup_spi16_data_clk: qup-spi16-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup16"; }; - qup_spi17_cs: qup-spi17-cs { + qup_spi17_cs: qup-spi17-cs-state { pins = "gpio67"; function = "qup17"; }; - qup_spi17_data_clk: qup-spi17-data-clk { + qup_spi17_data_clk: qup-spi17-data-clk-state { pins = "gpio64", "gpio65", "gpio66"; function = "qup17"; }; - qup_spi18_cs: qup-spi18-cs { + qup_spi18_cs: qup-spi18-cs-state { pins = "gpio71"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_spi18_data_clk: qup-spi18-data-clk { + qup_spi18_data_clk: qup-spi18-data-clk-state { pins = "gpio68", "gpio69", "gpio70"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_spi19_cs: qup-spi19-cs { + qup_spi19_cs: qup-spi19-cs-state { pins = "gpio75"; function = "qup19"; drive-strength = <6>; bias-disable; }; - qup_spi19_data_clk: qup-spi19-data-clk { + qup_spi19_data_clk: qup-spi19-data-clk-state { pins = "gpio72", "gpio73", "gpio74"; function = "qup19"; drive-strength = <6>; bias-disable; }; - qup_spi20_cs: qup-spi20-cs { + qup_spi20_cs: qup-spi20-cs-state { pins = "gpio79"; function = "qup20"; }; - qup_spi20_data_clk: qup-spi20-data-clk { + qup_spi20_data_clk: qup-spi20-data-clk-state { pins = "gpio76", "gpio77", "gpio78"; function = "qup20"; }; - qup_spi21_cs: qup-spi21-cs { + qup_spi21_cs: qup-spi21-cs-state { pins = "gpio83"; function = "qup21"; }; - qup_spi21_data_clk: qup-spi21-data-clk { + qup_spi21_data_clk: qup-spi21-data-clk-state { pins = "gpio80", "gpio81", "gpio82"; function = "qup21"; }; - qup_uart7_rx: qup-uart7-rx { + qup_uart7_rx: qup-uart7-rx-state { pins = "gpio26"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_uart7_tx: qup-uart7-tx { + qup_uart7_tx: qup-uart7-tx-state { pins = "gpio27"; function = "qup7"; drive-strength = <2>; bias-disable; }; - qup_uart20_default: qup-uart20-default { + qup_uart20_default: qup-uart20-default-state { pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; -- cgit From d801357a0573105ff5db9fbfde80c3572369a261 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:45 +0200 Subject: arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-40-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 44 ++-- arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 8 +- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 20 +- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 14 +- arch/arm64/boot/dts/qcom/sc7280.dtsi | 316 ++++++++++++------------- 5 files changed, 201 insertions(+), 201 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 855dca3b5b02..74747c4a858a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -725,27 +725,27 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_od>; - amp_en: amp-en { + amp_en: amp-en-pins { pins = "gpio63"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ap_ec_int_l: ap-ec-int-l { + ap_ec_int_l: ap-ec-int-l-pins { pins = "gpio18"; function = "gpio"; bias-pull-up; }; - bios_flash_wp_od: bios-flash-wp-od { + bios_flash_wp_od: bios-flash-wp-od-pins { pins = "gpio16"; function = "gpio"; /* Has external pull */ bias-disable; }; - en_fp_rails: en-fp-rails { + en_fp_rails: en-fp-rails-pins { pins = "gpio77"; function = "gpio"; bias-disable; @@ -753,60 +753,60 @@ ap_ec_spi: &spi10 { output-high; }; - en_pp3300_codec: en-pp3300-codec { + en_pp3300_codec: en-pp3300-codec-pins { pins = "gpio105"; function = "gpio"; bias-disable; drive-strength = <2>; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { + en_pp3300_dx_edp: en-pp3300-dx-edp-pins { pins = "gpio80"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_rst_l: fp-rst-l { + fp_rst_l: fp-rst-l-pins { pins = "gpio78"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_to_ap_irq_l: fp-to-ap-irq-l { + fp_to_ap_irq_l: fp-to-ap-irq-l-pins { pins = "gpio61"; function = "gpio"; /* Has external pullup */ bias-disable; }; - fpmcu_boot0: fpmcu-boot0 { + fpmcu_boot0: fpmcu-boot0-pins { pins = "gpio68"; function = "gpio"; bias-disable; }; - gsc_ap_int_odl: gsc-ap-int-odl { + gsc_ap_int_odl: gsc-ap-int-odl-pins { pins = "gpio104"; function = "gpio"; bias-pull-up; }; - hp_irq: hp-irq { + hp_irq: hp-irq-pins { pins = "gpio101"; function = "gpio"; bias-pull-up; }; - hub_en: hub-en { + hub_en: hub-en-pins { pins = "gpio157"; function = "gpio"; bias-disable; drive-strength = <2>; }; - pe_wake_odl: pe-wake-odl { + pe_wake_odl: pe-wake-odl-pins { pins = "gpio3"; function = "gpio"; /* Has external pull */ @@ -815,45 +815,45 @@ ap_ec_spi: &spi10 { }; /* For ap_spi_fp */ - qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high { + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins { pins = "gpio39"; function = "gpio"; output-high; }; /* For ap_ec_spi */ - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { pins = "gpio43"; function = "gpio"; output-high; }; - sar0_irq_odl: sar0-irq-odl { + sar0_irq_odl: sar0-irq-odl-pins { pins = "gpio141"; function = "gpio"; bias-pull-up; }; - sar1_irq_odl: sar1-irq-odl { + sar1_irq_odl: sar1-irq-odl-pins { pins = "gpio140"; function = "gpio"; bias-pull-up; }; - sd_cd_odl: sd-cd-odl { + sd_cd_odl: sd-cd-odl-pins { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - ssd_en: ssd-en { + ssd_en: ssd-en-pins { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ssd_rst_l: ssd-rst-l { + ssd_rst_l: ssd-rst-l-pins { pins = "gpio2"; function = "gpio"; bias-disable; @@ -861,14 +861,14 @@ ap_ec_spi: &spi10 { output-low; }; - tp_int_odl: tp-int-odl { + tp_int_odl: tp-int-odl-pins { pins = "gpio7"; function = "gpio"; /* Has external pullup */ bias-disable; }; - wf_cam_en: wf-cam-en { + wf_cam_en: wf-cam-en-pins { pins = "gpio119"; function = "gpio"; /* Has external pulldown */ diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index a7c346aa3b02..7f5143e9bb80 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -79,26 +79,26 @@ ap_h1_spi: &spi14 { }; &tlmm { - ap_ec_int_l: ap-ec-int-l { + ap_ec_int_l: ap-ec-int-l-pins { pins = "gpio18"; function = "gpio"; input-enable; bias-pull-up; }; - h1_ap_int_odl: h1-ap-int-odl { + h1_ap_int_odl: h1-ap-int-odl-pins { pins = "gpio104"; function = "gpio"; input-enable; bias-pull-up; }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { pins = "gpio43"; output-high; }; - qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high { + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins { pins = "gpio59"; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index e0a2dc9ce036..cd432a2856a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -753,18 +753,18 @@ drive-strength = <2>; }; - bt_en: bt-en { + bt_en: bt-en-pins { pins = "gpio85"; function = "gpio"; output-low; bias-disable; }; - nvme_pwren: nvme-pwren { + nvme_pwren: nvme-pwren-pins { function = "gpio"; }; - pcie1_reset_n: pcie1-reset-n { + pcie1_reset_n: pcie1-reset-n-pins { pins = "gpio2"; function = "gpio"; @@ -773,7 +773,7 @@ bias-disable; }; - pcie1_wake_n: pcie1-wake-n { + pcie1_wake_n: pcie1-wake-n-pins { pins = "gpio3"; function = "gpio"; @@ -781,7 +781,7 @@ bias-pull-up; }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { pins = "gpio28"; function = "gpio"; /* @@ -794,7 +794,7 @@ bias-bus-hold; }; - qup_uart7_sleep_rts: qup-uart7-sleep-rts { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { pins = "gpio29"; function = "gpio"; /* @@ -806,7 +806,7 @@ bias-pull-down; }; - qup_uart7_sleep_tx: qup-uart7-sleep-tx { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { pins = "gpio30"; function = "gpio"; /* @@ -816,7 +816,7 @@ bias-pull-up; }; - qup_uart7_sleep_rx: qup-uart7-sleep-rx { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { pins = "gpio31"; function = "gpio"; /* @@ -827,13 +827,13 @@ bias-pull-up; }; - sd_cd: sd-cd { + sd_cd: sd-cd-pins { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - sw_ctrl: sw-ctrl { + sw_ctrl: sw-ctrl-pins { pins = "gpio86"; function = "gpio"; bias-pull-down; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index b2efc7f489af..4b8c676b0bb1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -595,7 +595,7 @@ mos_bt_uart: &uart7 { }; &tlmm { - mos_bt_en: mos-bt-en { + mos_bt_en: mos-bt-en-pins { pins = "gpio85"; function = "gpio"; drive-strength = <2>; @@ -603,7 +603,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_cts: qup-uart7-sleep-cts { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { pins = "gpio28"; function = "gpio"; /* @@ -617,7 +617,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rts: qup-uart7-sleep-rts { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { pins = "gpio29"; function = "gpio"; /* @@ -630,7 +630,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rx: qup-uart7-sleep-rx { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { pins = "gpio31"; function = "gpio"; /* @@ -642,7 +642,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_tx: qup-uart7-sleep-tx { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { pins = "gpio30"; function = "gpio"; /* @@ -652,13 +652,13 @@ mos_bt_uart: &uart7 { bias-pull-up; }; - ts_int_conn: ts-int-conn { + ts_int_conn: ts-int-conn-pins { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_rst_conn: ts-rst-conn { + ts_rst_conn: ts-rst-conn-pins { pins = "gpio54"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 708c42b00b18..44e9576afc03 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -4250,791 +4250,791 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det { + dp_hot_plug_det: dp-hot-plug-det-pins { pins = "gpio47"; function = "dp_hot"; }; - edp_hot_plug_det: edp-hot-plug-det { + edp_hot_plug_det: edp-hot-plug-det-pins { pins = "gpio60"; function = "edp_hot"; }; - mi2s0_data0: mi2s0-data0 { + mi2s0_data0: mi2s0-data0-pins { pins = "gpio98"; function = "mi2s0_data0"; }; - mi2s0_data1: mi2s0-data1 { + mi2s0_data1: mi2s0-data1-pins { pins = "gpio99"; function = "mi2s0_data1"; }; - mi2s0_mclk: mi2s0-mclk { + mi2s0_mclk: mi2s0-mclk-pins { pins = "gpio96"; function = "pri_mi2s"; }; - mi2s0_sclk: mi2s0-sclk { + mi2s0_sclk: mi2s0-sclk-pins { pins = "gpio97"; function = "mi2s0_sck"; }; - mi2s0_ws: mi2s0-ws { + mi2s0_ws: mi2s0-ws-pins { pins = "gpio100"; function = "mi2s0_ws"; }; - mi2s1_data0: mi2s1-data0 { + mi2s1_data0: mi2s1-data0-pins { pins = "gpio107"; function = "mi2s1_data0"; }; - mi2s1_sclk: mi2s1-sclk { + mi2s1_sclk: mi2s1-sclk-pins { pins = "gpio106"; function = "mi2s1_sck"; }; - mi2s1_ws: mi2s1-ws { + mi2s1_ws: mi2s1-ws-pins { pins = "gpio108"; function = "mi2s1_ws"; }; - pcie1_clkreq_n: pcie1-clkreq-n { + pcie1_clkreq_n: pcie1-clkreq-n-pins { pins = "gpio79"; function = "pcie1_clkreqn"; }; - qspi_clk: qspi-clk { + qspi_clk: qspi-clk-pins { pins = "gpio14"; function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { + qspi_cs0: qspi-cs0-pins { pins = "gpio15"; function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { + qspi_cs1: qspi-cs1-pins { pins = "gpio19"; function = "qspi_cs"; }; - qspi_data01: qspi-data01 { + qspi_data01: qspi-data01-pins { pins = "gpio12", "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12 { + qspi_data12: qspi-data12-pins { pins = "gpio16", "gpio17"; function = "qspi_data"; }; - qup_i2c0_data_clk: qup-i2c0-data-clk { + qup_i2c0_data_clk: qup-i2c0-data-clk-pins { pins = "gpio0", "gpio1"; function = "qup00"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk { + qup_i2c1_data_clk: qup-i2c1-data-clk-pins { pins = "gpio4", "gpio5"; function = "qup01"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk { + qup_i2c2_data_clk: qup-i2c2-data-clk-pins { pins = "gpio8", "gpio9"; function = "qup02"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk { + qup_i2c3_data_clk: qup-i2c3-data-clk-pins { pins = "gpio12", "gpio13"; function = "qup03"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk { + qup_i2c4_data_clk: qup-i2c4-data-clk-pins { pins = "gpio16", "gpio17"; function = "qup04"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk { + qup_i2c5_data_clk: qup-i2c5-data-clk-pins { pins = "gpio20", "gpio21"; function = "qup05"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk { + qup_i2c6_data_clk: qup-i2c6-data-clk-pins { pins = "gpio24", "gpio25"; function = "qup06"; }; - qup_i2c7_data_clk: qup-i2c7-data-clk { + qup_i2c7_data_clk: qup-i2c7-data-clk-pins { pins = "gpio28", "gpio29"; function = "qup07"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk { + qup_i2c8_data_clk: qup-i2c8-data-clk-pins { pins = "gpio32", "gpio33"; function = "qup10"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk { + qup_i2c9_data_clk: qup-i2c9-data-clk-pins { pins = "gpio36", "gpio37"; function = "qup11"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk { + qup_i2c10_data_clk: qup-i2c10-data-clk-pins { pins = "gpio40", "gpio41"; function = "qup12"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk { + qup_i2c11_data_clk: qup-i2c11-data-clk-pins { pins = "gpio44", "gpio45"; function = "qup13"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk { + qup_i2c12_data_clk: qup-i2c12-data-clk-pins { pins = "gpio48", "gpio49"; function = "qup14"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk { + qup_i2c13_data_clk: qup-i2c13-data-clk-pins { pins = "gpio52", "gpio53"; function = "qup15"; }; - qup_i2c14_data_clk: qup-i2c14-data-clk { + qup_i2c14_data_clk: qup-i2c14-data-clk-pins { pins = "gpio56", "gpio57"; function = "qup16"; }; - qup_i2c15_data_clk: qup-i2c15-data-clk { + qup_i2c15_data_clk: qup-i2c15-data-clk-pins { pins = "gpio60", "gpio61"; function = "qup17"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-pins { pins = "gpio0", "gpio1", "gpio2"; function = "qup00"; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-pins { pins = "gpio3"; function = "qup00"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins { pins = "gpio3"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-pins { pins = "gpio4", "gpio5", "gpio6"; function = "qup01"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-pins { pins = "gpio7"; function = "qup01"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins { pins = "gpio7"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-pins { pins = "gpio8", "gpio9", "gpio10"; function = "qup02"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-pins { pins = "gpio11"; function = "qup02"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins { pins = "gpio11"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-pins { pins = "gpio12", "gpio13", "gpio14"; function = "qup03"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-pins { pins = "gpio15"; function = "qup03"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins { pins = "gpio15"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-pins { pins = "gpio16", "gpio17", "gpio18"; function = "qup04"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-pins { pins = "gpio19"; function = "qup04"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins { pins = "gpio19"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-pins { pins = "gpio20", "gpio21", "gpio22"; function = "qup05"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-pins { pins = "gpio23"; function = "qup05"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins { pins = "gpio23"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-pins { pins = "gpio24", "gpio25", "gpio26"; function = "qup06"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-pins { pins = "gpio27"; function = "qup06"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins { pins = "gpio27"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk { + qup_spi7_data_clk: qup-spi7-data-clk-pins { pins = "gpio28", "gpio29", "gpio30"; function = "qup07"; }; - qup_spi7_cs: qup-spi7-cs { + qup_spi7_cs: qup-spi7-cs-pins { pins = "gpio31"; function = "qup07"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins { pins = "gpio31"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-pins { pins = "gpio32", "gpio33", "gpio34"; function = "qup10"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-pins { pins = "gpio35"; function = "qup10"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins { pins = "gpio35"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-pins { pins = "gpio36", "gpio37", "gpio38"; function = "qup11"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-pins { pins = "gpio39"; function = "qup11"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins { pins = "gpio39"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-pins { pins = "gpio40", "gpio41", "gpio42"; function = "qup12"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-pins { pins = "gpio43"; function = "qup12"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins { pins = "gpio43"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-pins { pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-pins { pins = "gpio47"; function = "qup13"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins { pins = "gpio47"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-pins { pins = "gpio48", "gpio49", "gpio50"; function = "qup14"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-pins { pins = "gpio51"; function = "qup14"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins { pins = "gpio51"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-pins { pins = "gpio52", "gpio53", "gpio54"; function = "qup15"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-pins { pins = "gpio55"; function = "qup15"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins { pins = "gpio55"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-pins { pins = "gpio56", "gpio57", "gpio58"; function = "qup16"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-pins { pins = "gpio59"; function = "qup16"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins { pins = "gpio59"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-pins { pins = "gpio60", "gpio61", "gpio62"; function = "qup17"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-pins { pins = "gpio63"; function = "qup17"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins { pins = "gpio63"; function = "gpio"; }; - qup_uart0_cts: qup-uart0-cts { + qup_uart0_cts: qup-uart0-cts-pins { pins = "gpio0"; function = "qup00"; }; - qup_uart0_rts: qup-uart0-rts { + qup_uart0_rts: qup-uart0-rts-pins { pins = "gpio1"; function = "qup00"; }; - qup_uart0_tx: qup-uart0-tx { + qup_uart0_tx: qup-uart0-tx-pins { pins = "gpio2"; function = "qup00"; }; - qup_uart0_rx: qup-uart0-rx { + qup_uart0_rx: qup-uart0-rx-pins { pins = "gpio3"; function = "qup00"; }; - qup_uart1_cts: qup-uart1-cts { + qup_uart1_cts: qup-uart1-cts-pins { pins = "gpio4"; function = "qup01"; }; - qup_uart1_rts: qup-uart1-rts { + qup_uart1_rts: qup-uart1-rts-pins { pins = "gpio5"; function = "qup01"; }; - qup_uart1_tx: qup-uart1-tx { + qup_uart1_tx: qup-uart1-tx-pins { pins = "gpio6"; function = "qup01"; }; - qup_uart1_rx: qup-uart1-rx { + qup_uart1_rx: qup-uart1-rx-pins { pins = "gpio7"; function = "qup01"; }; - qup_uart2_cts: qup-uart2-cts { + qup_uart2_cts: qup-uart2-cts-pins { pins = "gpio8"; function = "qup02"; }; - qup_uart2_rts: qup-uart2-rts { + qup_uart2_rts: qup-uart2-rts-pins { pins = "gpio9"; function = "qup02"; }; - qup_uart2_tx: qup-uart2-tx { + qup_uart2_tx: qup-uart2-tx-pins { pins = "gpio10"; function = "qup02"; }; - qup_uart2_rx: qup-uart2-rx { + qup_uart2_rx: qup-uart2-rx-pins { pins = "gpio11"; function = "qup02"; }; - qup_uart3_cts: qup-uart3-cts { + qup_uart3_cts: qup-uart3-cts-pins { pins = "gpio12"; function = "qup03"; }; - qup_uart3_rts: qup-uart3-rts { + qup_uart3_rts: qup-uart3-rts-pins { pins = "gpio13"; function = "qup03"; }; - qup_uart3_tx: qup-uart3-tx { + qup_uart3_tx: qup-uart3-tx-pins { pins = "gpio14"; function = "qup03"; }; - qup_uart3_rx: qup-uart3-rx { + qup_uart3_rx: qup-uart3-rx-pins { pins = "gpio15"; function = "qup03"; }; - qup_uart4_cts: qup-uart4-cts { + qup_uart4_cts: qup-uart4-cts-pins { pins = "gpio16"; function = "qup04"; }; - qup_uart4_rts: qup-uart4-rts { + qup_uart4_rts: qup-uart4-rts-pins { pins = "gpio17"; function = "qup04"; }; - qup_uart4_tx: qup-uart4-tx { + qup_uart4_tx: qup-uart4-tx-pins { pins = "gpio18"; function = "qup04"; }; - qup_uart4_rx: qup-uart4-rx { + qup_uart4_rx: qup-uart4-rx-pins { pins = "gpio19"; function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts { + qup_uart5_cts: qup-uart5-cts-pins { pins = "gpio20"; function = "qup05"; }; - qup_uart5_rts: qup-uart5-rts { + qup_uart5_rts: qup-uart5-rts-pins { pins = "gpio21"; function = "qup05"; }; - qup_uart5_tx: qup-uart5-tx { + qup_uart5_tx: qup-uart5-tx-pins { pins = "gpio22"; function = "qup05"; }; - qup_uart5_rx: qup-uart5-rx { + qup_uart5_rx: qup-uart5-rx-pins { pins = "gpio23"; function = "qup05"; }; - qup_uart6_cts: qup-uart6-cts { + qup_uart6_cts: qup-uart6-cts-pins { pins = "gpio24"; function = "qup06"; }; - qup_uart6_rts: qup-uart6-rts { + qup_uart6_rts: qup-uart6-rts-pins { pins = "gpio25"; function = "qup06"; }; - qup_uart6_tx: qup-uart6-tx { + qup_uart6_tx: qup-uart6-tx-pins { pins = "gpio26"; function = "qup06"; }; - qup_uart6_rx: qup-uart6-rx { + qup_uart6_rx: qup-uart6-rx-pins { pins = "gpio27"; function = "qup06"; }; - qup_uart7_cts: qup-uart7-cts { + qup_uart7_cts: qup-uart7-cts-pins { pins = "gpio28"; function = "qup07"; }; - qup_uart7_rts: qup-uart7-rts { + qup_uart7_rts: qup-uart7-rts-pins { pins = "gpio29"; function = "qup07"; }; - qup_uart7_tx: qup-uart7-tx { + qup_uart7_tx: qup-uart7-tx-pins { pins = "gpio30"; function = "qup07"; }; - qup_uart7_rx: qup-uart7-rx { + qup_uart7_rx: qup-uart7-rx-pins { pins = "gpio31"; function = "qup07"; }; - qup_uart8_cts: qup-uart8-cts { + qup_uart8_cts: qup-uart8-cts-pins { pins = "gpio32"; function = "qup10"; }; - qup_uart8_rts: qup-uart8-rts { + qup_uart8_rts: qup-uart8-rts-pins { pins = "gpio33"; function = "qup10"; }; - qup_uart8_tx: qup-uart8-tx { + qup_uart8_tx: qup-uart8-tx-pins { pins = "gpio34"; function = "qup10"; }; - qup_uart8_rx: qup-uart8-rx { + qup_uart8_rx: qup-uart8-rx-pins { pins = "gpio35"; function = "qup10"; }; - qup_uart9_cts: qup-uart9-cts { + qup_uart9_cts: qup-uart9-cts-pins { pins = "gpio36"; function = "qup11"; }; - qup_uart9_rts: qup-uart9-rts { + qup_uart9_rts: qup-uart9-rts-pins { pins = "gpio37"; function = "qup11"; }; - qup_uart9_tx: qup-uart9-tx { + qup_uart9_tx: qup-uart9-tx-pins { pins = "gpio38"; function = "qup11"; }; - qup_uart9_rx: qup-uart9-rx { + qup_uart9_rx: qup-uart9-rx-pins { pins = "gpio39"; function = "qup11"; }; - qup_uart10_cts: qup-uart10-cts { + qup_uart10_cts: qup-uart10-cts-pins { pins = "gpio40"; function = "qup12"; }; - qup_uart10_rts: qup-uart10-rts { + qup_uart10_rts: qup-uart10-rts-pins { pins = "gpio41"; function = "qup12"; }; - qup_uart10_tx: qup-uart10-tx { + qup_uart10_tx: qup-uart10-tx-pins { pins = "gpio42"; function = "qup12"; }; - qup_uart10_rx: qup-uart10-rx { + qup_uart10_rx: qup-uart10-rx-pins { pins = "gpio43"; function = "qup12"; }; - qup_uart11_cts: qup-uart11-cts { + qup_uart11_cts: qup-uart11-cts-pins { pins = "gpio44"; function = "qup13"; }; - qup_uart11_rts: qup-uart11-rts { + qup_uart11_rts: qup-uart11-rts-pins { pins = "gpio45"; function = "qup13"; }; - qup_uart11_tx: qup-uart11-tx { + qup_uart11_tx: qup-uart11-tx-pins { pins = "gpio46"; function = "qup13"; }; - qup_uart11_rx: qup-uart11-rx { + qup_uart11_rx: qup-uart11-rx-pins { pins = "gpio47"; function = "qup13"; }; - qup_uart12_cts: qup-uart12-cts { + qup_uart12_cts: qup-uart12-cts-pins { pins = "gpio48"; function = "qup14"; }; - qup_uart12_rts: qup-uart12-rts { + qup_uart12_rts: qup-uart12-rts-pins { pins = "gpio49"; function = "qup14"; }; - qup_uart12_tx: qup-uart12-tx { + qup_uart12_tx: qup-uart12-tx-pins { pins = "gpio50"; function = "qup14"; }; - qup_uart12_rx: qup-uart12-rx { + qup_uart12_rx: qup-uart12-rx-pins { pins = "gpio51"; function = "qup14"; }; - qup_uart13_cts: qup-uart13-cts { + qup_uart13_cts: qup-uart13-cts-pins { pins = "gpio52"; function = "qup15"; }; - qup_uart13_rts: qup-uart13-rts { + qup_uart13_rts: qup-uart13-rts-pins { pins = "gpio53"; function = "qup15"; }; - qup_uart13_tx: qup-uart13-tx { + qup_uart13_tx: qup-uart13-tx-pins { pins = "gpio54"; function = "qup15"; }; - qup_uart13_rx: qup-uart13-rx { + qup_uart13_rx: qup-uart13-rx-pins { pins = "gpio55"; function = "qup15"; }; - qup_uart14_cts: qup-uart14-cts { + qup_uart14_cts: qup-uart14-cts-pins { pins = "gpio56"; function = "qup16"; }; - qup_uart14_rts: qup-uart14-rts { + qup_uart14_rts: qup-uart14-rts-pins { pins = "gpio57"; function = "qup16"; }; - qup_uart14_tx: qup-uart14-tx { + qup_uart14_tx: qup-uart14-tx-pins { pins = "gpio58"; function = "qup16"; }; - qup_uart14_rx: qup-uart14-rx { + qup_uart14_rx: qup-uart14-rx-pins { pins = "gpio59"; function = "qup16"; }; - qup_uart15_cts: qup-uart15-cts { + qup_uart15_cts: qup-uart15-cts-pins { pins = "gpio60"; function = "qup17"; }; - qup_uart15_rts: qup-uart15-rts { + qup_uart15_rts: qup-uart15-rts-pins { pins = "gpio61"; function = "qup17"; }; - qup_uart15_tx: qup-uart15-tx { + qup_uart15_tx: qup-uart15-tx-pins { pins = "gpio62"; function = "qup17"; }; - qup_uart15_rx: qup-uart15-rx { + qup_uart15_rx: qup-uart15-rx-pins { pins = "gpio63"; function = "qup17"; }; - sdc1_clk: sdc1-clk { + sdc1_clk: sdc1-clk-pins { pins = "sdc1_clk"; }; - sdc1_cmd: sdc1-cmd { + sdc1_cmd: sdc1-cmd-pins { pins = "sdc1_cmd"; }; - sdc1_data: sdc1-data { + sdc1_data: sdc1-data-pins { pins = "sdc1_data"; }; - sdc1_rclk: sdc1-rclk { + sdc1_rclk: sdc1-rclk-pins { pins = "sdc1_rclk"; }; - sdc1_clk_sleep: sdc1-clk-sleep { + sdc1_clk_sleep: sdc1-clk-sleep-pins { pins = "sdc1_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc1_cmd_sleep: sdc1-cmd-sleep { + sdc1_cmd_sleep: sdc1-cmd-sleep-pins { pins = "sdc1_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc1_data_sleep: sdc1-data-sleep { + sdc1_data_sleep: sdc1-data-sleep-pins { pins = "sdc1_data"; drive-strength = <2>; bias-bus-hold; }; - sdc1_rclk_sleep: sdc1-rclk-sleep { + sdc1_rclk_sleep: sdc1-rclk-sleep-pins { pins = "sdc1_rclk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_clk: sdc2-clk { + sdc2_clk: sdc2-clk-pins { pins = "sdc2_clk"; }; - sdc2_cmd: sdc2-cmd { + sdc2_cmd: sdc2-cmd-pins { pins = "sdc2_cmd"; }; - sdc2_data: sdc2-data { + sdc2_data: sdc2-data-pins { pins = "sdc2_data"; }; - sdc2_clk_sleep: sdc2-clk-sleep { + sdc2_clk_sleep: sdc2-clk-sleep-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_cmd_sleep: sdc2-cmd-sleep { + sdc2_cmd_sleep: sdc2-cmd-sleep-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc2_data_sleep: sdc2-data-sleep { + sdc2_data_sleep: sdc2-data-sleep-pins { pins = "sdc2_data"; drive-strength = <2>; bias-bus-hold; -- cgit From e0eeb08522c94860c3528816f612c335a6d6552c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 12 Sep 2022 08:17:46 +0200 Subject: arm64: dts: qcom: sc7280-herobrine: correct TLMM gpio-line-names There are 174 GPIOs in SC7280. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220912061746.6311-41-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 7a14bad9c23e..f0f26af1e421 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -372,7 +372,5 @@ ap_ts_pen_1v8: &i2c13 { "", /* 170 */ "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", - "", - "", ""; }; -- cgit From 6244e7da53dcdf0a5905f6ac2a2b643dd439a19c Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 9 Sep 2022 13:51:35 +0300 Subject: ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node Add pxo/cxo clocks to the GCC device tree node. Acked-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909105136.3733919-5-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-msm8660.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index fd7751d4d886..e6cb90defdc2 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -50,7 +50,7 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; @@ -129,6 +129,8 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; }; gsbi1: gsbi@16000000 { -- cgit From baecbda529331e146c7460e2aea8b54c20dcdea7 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 9 Sep 2022 13:51:36 +0300 Subject: ARM: dts: qcom: msm8660: fix node names for fixed clocks Fix node names for three fixed clocks to follow the no-underscores-in-name rule. To remain compatible with the drivers expecting to find the old clock names, add clock-output-names properties. Signed-off-by: Dmitry Baryshkov Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909105136.3733919-6-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-msm8660.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e6cb90defdc2..ddce7d64ba99 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -50,22 +50,25 @@ }; clocks { - cxo_board: cxo_board { + cxo_board: cxo-board-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; + clock-output-names = "cxo_board"; }; - pxo_board: pxo_board { + pxo_board: pxo-board-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; + clock-output-names = "pxo_board"; }; - sleep_clk { + sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-output-names = "sleep_clk"; }; }; -- cgit From d30bcfa4408596e8dd3714dfdd90334d2bdc9856 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:25 +0200 Subject: arm64: dts: qcom: ipq6018: add missing TCSR syscon compatible TCSR syscon node should come with dedicated compatible. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-6-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index aaad7d9059f6..6b35f03c4862 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -258,7 +258,7 @@ }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "qcom,tcsr-ipq6018", "syscon"; reg = <0x0 0x01937000 0x0 0x21000>; }; -- cgit From d07ac9d93ced0f8203230bf1de49b7cc605e1547 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:26 +0200 Subject: arm64: dts: qcom: msm8953: add missing TCSR syscon compatible TCSR syscon node should come with dedicated compatible. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-7-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8953.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 8416a45ca4fd..ed05897d33f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -722,7 +722,7 @@ }; tcsr_phy_clk_scheme_sel: syscon@193f044 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8953", "syscon"; reg = <0x193f044 0x4>; }; -- cgit From 98460385091fc2e86a296f9643105d8a8777ccc2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:27 +0200 Subject: arm64: dts: qcom: qcs404: add missing TCSR syscon compatible TCSR syscon node should come with dedicated compatible. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-8-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 46dbfd1094c8..80f2d05595fa 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -727,7 +727,7 @@ }; tcsr: syscon@1937000 { - compatible = "syscon"; + compatible = "qcom,qcs404-tcsr", "syscon"; reg = <0x01937000 0x25000>; }; -- cgit From 8a99e0fc8bd3fa9c8be1fc115a2e38f4fd51ccda Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:28 +0200 Subject: arm64: dts: qcom: msm8996: add missing TCSR syscon compatible TCSR syscon node should come with dedicated compatible. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-9-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 968eb13e1c63..adbb9f9c70a5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3500,7 +3500,7 @@ }; saw3: syscon@9a10000 { - compatible = "syscon"; + compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x09a10000 0x1000>; }; -- cgit From f5e303aefc06b7508d7a490f9a2d80e4dc134c70 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:31 +0200 Subject: arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/ipq6018-cp01-c1.dtb: hwlock: 'reg' is a required property qcom/ipq6018-cp01-c1.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-12-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 6b35f03c4862..a7c7ca980a71 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -129,12 +129,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - pmuv8: pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; - reg = <0x0 0x01905000 0x0 0x8000>; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0x0 0x01905000 0x0 0x1000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 { -- cgit From 9e826e05061c61d84217bbe436b4ef0bedbfe458 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:32 +0200 Subject: arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/msm8994-sony-xperia-kitakami-suzuran.dtb: hwlock: 'reg' is a required property qcom/msm8994-sony-xperia-kitakami-suzuran.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-13-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 86ef0091caff..e1fc4b31a252 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -165,12 +165,6 @@ reg = <0 0x80000000 0 0>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; @@ -763,9 +757,10 @@ #interrupt-cells = <4>; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; }; tlmm: pinctrl@fd510000 { -- cgit From 16ae4e557b2fa9fc7372b4503247aca80a476272 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:34 +0200 Subject: ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom-apq8084-mtp.dtb: hwlock: 'reg' is a required property qcom-apq8084-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-15-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-apq8084.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index c2e22bf3260d..0e559626f831 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -388,14 +388,9 @@ reg = <0xfc400000 0x4000>; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; - - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; #hwlock-cells = <1>; }; -- cgit From 18a4af7a598445af54e1e16a66b7f31669578701 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 9 Sep 2022 11:20:35 +0200 Subject: ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom-msm8226-samsung-s3ve3g.dtb: hwlock: 'reg' is a required property qcom-msm8226-samsung-s3ve3g.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220909092035.223915-16-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-msm8226.dtsi | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 0b5effdb269a..efb5d1edc3a8 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -44,13 +44,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; - - #hwlock-cells = <1>; - }; - reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -508,9 +501,10 @@ reg = <0xfc428000 0x4000>; }; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; + tcsr_mutex: hwlock@fd484000 { + compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex"; + reg = <0xfd484000 0x1000>; + #hwlock-cells = <1>; }; }; -- cgit From b504af6c9912502efa9af162b50cd589351b6894 Mon Sep 17 00:00:00 2001 From: Yassine Oudjana Date: Wed, 22 Jun 2022 20:13:22 +0400 Subject: arm64: dts: qcom: Use WCD9335 DT bindings Replace DAI indices in codec nodes with definitions from the WCD9335 DT bindings for devices that use WCD9335. Signed-off-by: Yassine Oudjana Acked-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220622161322.168017-4-y.oudjana@protonmail.com --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 5 +++-- arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 5 +++-- arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 5 +++-- 3 files changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 62e2f7eea276..5cdc7ac1a9c0 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -14,6 +14,7 @@ #include #include #include +#include /* * GPIO name legend: proper name = the GPIO line is used as GPIO @@ -1064,7 +1065,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -1079,7 +1080,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 25f30ec277c1..4e5264f4116a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -8,6 +8,7 @@ #include "msm8996-xiaomi-common.dtsi" #include #include +#include #include / { @@ -193,7 +194,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -208,7 +209,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index 0b47a659cc38..bc8ebf10be9c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -9,6 +9,7 @@ #include "pmi8996.dtsi" #include #include +#include / { model = "Xiaomi Mi Note 2"; @@ -190,7 +191,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -205,7 +206,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; -- cgit From 30f17249c171c9ac50e9f6d51c0bb5db1f5b2403 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 23 Jun 2022 15:04:13 +0300 Subject: ARM: dts: qcom: apq8064: add clocks to the LCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the LCC device tree node. Signed-off-by: Dmitry Baryshkov Tested-by: David Heidelberg # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220623120418.250589-11-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-apq8064.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 257fcd497f86..f2c112331f65 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -834,6 +834,20 @@ reg = <0x28000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; }; mmcc: clock-controller@4000000 { -- cgit From 6e9b4595609adf4ee97970a84a6eaeb1610aacb3 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 23 Jun 2022 15:04:14 +0300 Subject: ARM: dts: qcom: msm8960: add clocks to the LCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the LCC device tree node. Signed-off-by: Dmitry Baryshkov Tested-by: David Heidelberg # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220623120418.250589-12-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-msm8960.dtsi | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a5f1eda707b5..5aa989577611 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -63,7 +63,7 @@ clock-output-names = "cxo_board"; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -137,6 +137,20 @@ reg = <0x28000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, <0>, + <0>, <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; }; clock-controller@4000000 { -- cgit From 85ddc865219b04ea7930a8107943fe3c2e3af886 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 23 Jun 2022 15:04:15 +0300 Subject: ARM: dts: qcom: apq8064: add clocks to the GCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the GCC device tree node. Signed-off-by: Dmitry Baryshkov Tested-by: David Heidelberg # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220623120418.250589-13-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index f2c112331f65..8d33d4004be5 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,6 +2,7 @@ /dts-v1/; #include +#include #include #include #include @@ -815,6 +816,10 @@ #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; tsens: thermal-sensor { compatible = "qcom,msm8960-tsens"; -- cgit From 80787e417f3058c6ea59af726e803ca307b67867 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 23 Jun 2022 15:04:16 +0300 Subject: ARM: dts: qcom: msm8960: add clocks to the GCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the GCC device tree node. Signed-off-by: Dmitry Baryshkov Tested-by: David Heidelberg # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220623120418.250589-14-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-msm8960.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 5aa989577611..38dd52cdaf60 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -3,6 +3,7 @@ #include #include +#include #include #include @@ -56,7 +57,7 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; @@ -130,6 +131,10 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; + clocks = <&cxo_board>, + <&pxo_board>, + <&lcc PLL4>; + clock-names = "cxo", "pxo", "pll4"; }; lcc: clock-controller@28000000 { -- cgit From f79742da254e47d38ea934813fb44a91aa834ee9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 23 Jun 2022 15:04:17 +0300 Subject: ARM: dts: qcom: apq8064: add clocks to the MMCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the MMCC device tree node. Signed-off-by: Dmitry Baryshkov Tested-by: David Heidelberg # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220623120418.250589-15-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-apq8064.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 8d33d4004be5..942aa2278355 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -861,6 +861,22 @@ #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; }; l2cc: clock-controller@2011000 { -- cgit From 2e312b3429244eae1b105cb942550f2e5282f887 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 23 Jun 2022 15:04:18 +0300 Subject: ARM: dts: qcom: msm8960: add clocks to the MMCC device node As we are converting this platform to use DT clock bindings, add clocks and clock-names properties to the MMCC device tree node. Signed-off-by: Dmitry Baryshkov Tested-by: David Heidelberg # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220623120418.250589-16-dmitry.baryshkov@linaro.org --- arch/arm/boot/dts/qcom-msm8960.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 38dd52cdaf60..c5740da3754c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -164,6 +164,22 @@ #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; }; l2cc: clock-controller@2011000 { -- cgit From 157b615066288f84e1812964a439603cfe8c1a19 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 4 Jul 2022 19:11:48 +0300 Subject: arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node Add #clock-cells property to the HDMI PHY device node to let other nodes resolve the hdmipll clock. While we are at it, also add the XO clock to the device node. Acked-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220704161148.814510-4-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index adbb9f9c70a5..f3f4c321fadb 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1162,9 +1162,13 @@ "hdmi_phy"; clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>; + <&gcc GCC_HDMI_CLKREF_CLK>, + <&xo_board>; clock-names = "iface", - "ref"; + "ref", + "xo"; + + #clock-cells = <0>; status = "disabled"; }; -- cgit From f2819650aab5b037e5e730c88abcd971e96a1637 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 7 Jul 2022 16:47:33 +0300 Subject: arm64: dts: qcom: sm8250: provide additional MSI interrupts On SM8250 each group of MSI interrupts is mapped to the separate host interrupt. Describe each of interrupts in the device tree for PCIe0 host. Tested on Qualcomm RB5 platform with first group of MSI interrupts being used by the PME and attached ath11k WiFi chip using second group of MSI interrupts. Reviewed-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220707134733.2436629-7-dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index cf5d65940174..a5b62cadb129 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1810,8 +1810,16 @@ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -- cgit From eddc917dbb7a3ce66ca3154cfa17cd4bdd18c17b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 12 Jul 2022 16:42:43 +0200 Subject: arm64: dts: qcom: align SDHCI reg-names with DT schema DT schema requires SDHCI reg names to be hc/core without "_mem" suffix, just like TXT bindings were expecting before the conversion. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Douglas Anderson Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220712144245.17417-4-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8953.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8994.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- 6 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index d53675fc1595..251bc764cdc5 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -383,7 +383,7 @@ sdhc_1: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index de741f287e1d..a831064700ee 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1483,7 +1483,7 @@ sdhc_1: mmc@7824000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; @@ -1501,7 +1501,7 @@ sdhc_2: mmc@7864000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index ed05897d33f1..6b992a6d56c1 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -799,7 +799,7 @@ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; @@ -859,7 +859,7 @@ compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7864900 0x500>, <0x7864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index e1fc4b31a252..ded5b7ceeaf9 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -459,7 +459,7 @@ sdhc1: mmc@f9824900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; @@ -482,7 +482,7 @@ sdhc2: mmc@f98a4900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index f3f4c321fadb..c0a2baffa49d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3023,7 +3023,7 @@ sdhc1: mmc@7464900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; @@ -3047,7 +3047,7 @@ sdhc2: mmc@74a4900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 1118134ff01e..f05f16ac5cc1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -2078,7 +2078,7 @@ sdhc2: mmc@c0a4900 { compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; -- cgit From 5eb82ddb7273bd34a36c05df271f34919eeea675 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 12 Jul 2022 16:42:44 +0200 Subject: ARM: dts: qcom: align SDHCI reg-names with DT schema DT schema requires SDHCI reg names to be hc/core without "_mem" suffix, just like TXT bindings were expecting before the conversion. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Douglas Anderson Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220712144245.17417-5-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-apq8084.dtsi | 4 ++-- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + arch/arm/boot/dts/qcom-msm8226.dtsi | 6 +++--- arch/arm/boot/dts/qcom-msm8974.dtsi | 6 +++--- arch/arm/boot/dts/qcom-sdx65.dtsi | 2 +- 5 files changed, 10 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0e559626f831..1c8d3bdc8fff 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -422,7 +422,7 @@ mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, @@ -435,7 +435,7 @@ mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index c07c8a791497..473b19204f10 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -224,6 +224,7 @@ sdhci: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; bus-width = <8>; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index efb5d1edc3a8..5ec46782ffb2 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -130,7 +130,7 @@ sdhc_1: mmc@f9824900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; @@ -146,7 +146,7 @@ sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; @@ -162,7 +162,7 @@ sdhc_3: mmc@f9864900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2cf9739fb86f..e137e1ec8ac9 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -439,7 +439,7 @@ sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; @@ -456,7 +456,7 @@ sdhc_3: mmc@f9864900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; @@ -475,7 +475,7 @@ sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 8daefd50217a..4cd405db5500 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -334,7 +334,7 @@ sdhc_1: mmc@8804000 { compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; - reg-names = "hc_mem"; + reg-names = "hc"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; -- cgit From 49c19337d0aca2e7f362d3c1a1c6f09c2dcfdae9 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 12 Jul 2022 16:42:45 +0200 Subject: ARM: dts: qcom: align SDHCI clocks with DT schema The DT schema expects clocks iface-core order. No functional change. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Douglas Anderson Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220712144245.17417-6-krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/qcom-apq8084.dtsi | 12 ++++++------ arch/arm/boot/dts/qcom-ipq4019.dtsi | 4 ++-- arch/arm/boot/dts/qcom-msm8226.dtsi | 18 +++++++++--------- arch/arm/boot/dts/qcom-msm8974.dtsi | 18 +++++++++--------- arch/arm/boot/dts/qcom-msm8974pro.dtsi | 6 +++--- 5 files changed, 29 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 1c8d3bdc8fff..f2fb7c975af8 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -425,10 +425,10 @@ reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; @@ -438,10 +438,10 @@ reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 473b19204f10..b23591110bd2 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -228,9 +228,9 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; bus-width = <8>; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_DCD_XO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 5ec46782ffb2..918ad686bfba 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -134,10 +134,10 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc1_default_state>; status = "disabled"; @@ -150,10 +150,10 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc2_default_state>; status = "disabled"; @@ -166,10 +166,10 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default"; pinctrl-0 = <&sdhc3_default_state>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index e137e1ec8ac9..7a9be0acf3f5 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -443,10 +443,10 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <8>; non-removable; @@ -460,10 +460,10 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <4>; #address-cells = <1>; @@ -479,10 +479,10 @@ interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <4>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index 1e882e16a221..58df6e75ab6d 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -10,10 +10,10 @@ }; &sdhc_1 { - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>, <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; - clock-names = "core", "iface", "xo", "cal", "sleep"; + clock-names = "iface", "core", "xo", "cal", "sleep"; }; -- cgit From ee1e278a84e7578e4aa20820852b7f73b4929c63 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 18 Jul 2022 17:38:14 +0200 Subject: ARM: dts: qcom: ipq8064: reorganize node order and sort them Reorganize node order and sort them by address. Signed-off-by: Christian Marangi Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220718153815.29414-1-ansuelsmth@gmail.com --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 767 ++++++++++++++++++------------------ 1 file changed, 383 insertions(+), 384 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index a9bf2596a417..e5b3bf723958 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -332,19 +332,59 @@ ranges; compatible = "simple-bus"; - lpass@28100000 { - compatible = "qcom,lpass-cpu"; - status = "disabled"; - clocks = <&lcc AHBIX_CLK>, - <&lcc MI2S_OSR_CLK>, - <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", - "mi2s-osr-clk", - "mi2s-bit-clk"; - interrupts = ; - interrupt-names = "lpass-irq-lpaif"; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = , + , + ; + interrupt-names = "ack", "err", "wakeup"; + + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + speedbin_efuse: speedbin@c0 { + reg = <0xc0 0x4>; + }; + tsens_calib: calib@400 { + reg = <0x400 0xb>; + }; + tsens_calib_backup: calib_backup@410 { + reg = <0x410 0xb>; + }; }; qcom_pinmux: pinmux@800000 { @@ -471,6 +511,35 @@ }; }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + tsens: thermal-sensor@900000 { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = ; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + sfpb_mutex: hwlock@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + + #hwlock-cells = <1>; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -500,46 +569,198 @@ cpu-offset = <0x80000>; }; + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu_l2_aux"; + }; + acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; }; + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; }; - adm_dma: dma-controller@18300000 { - compatible = "qcom,adm"; - reg = <0x18300000 0x100000>; - interrupts = ; - #dma-cells = <1>; + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; - clock-names = "core", "iface"; + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; - resets = <&gcc ADM0_RESET>, - <&gcc ADM0_PBUS_RESET>, - <&gcc ADM0_C0_RESET>, - <&gcc ADM0_C1_RESET>, - <&gcc ADM0_C2_RESET>; - reset-names = "clk", "pbus", "c0", "c1", "c2"; - qcom,ee = <0>; + usb3_0: usb3@100f8800 { + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x100f8800 0x8000>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_0_MASTER_RESET>; + reset-names = "master"; status = "disabled"; + + dwc3_0: dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = ; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; + hs_phy_0: phy@100f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; + ss_phy_0: phy@100f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb3_1: usb3@110f8800 { + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x110f8800 0x8000>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_1_MASTER_RESET>; + reset-names = "master"; + + status = "disabled"; + + dwc3_1: dwc3@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = ; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + hs_phy_1: phy@110f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_1: phy@110f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = ; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = ; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba: amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc3: mmc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc1: mmc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; }; gsbi1: gsbi@12440000 { @@ -654,56 +875,6 @@ }; }; - gsbi5: gsbi@1a200000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <5>; - reg = <0x1a200000 0x100>; - clocks = <&gcc GSBI5_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - syscon-tcsr = <&tcsr>; - - gsbi5_serial: serial@1a240000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a240000 0x1000>, - <0x1a200000 0x1000>; - interrupts = ; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - i2c@1a280000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x1a280000 0x1000>; - interrupts = ; - - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - - spi@1a280000 { - compatible = "qcom,spi-qup-v1.1.1"; - reg = <0x1a280000 0x1000>; - interrupts = ; - - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; - gsbi6: gsbi@16500000 { compatible = "qcom,gsbi-v1.0.0"; reg = <0x16500000 0x100>; @@ -784,151 +955,120 @@ }; }; - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; - }; + adm_dma: dma-controller@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = ; + #dma-cells = <1>; - sata_phy: sata-phy@1b400000 { - compatible = "qcom,ipq806x-sata-phy"; - reg = <0x1b400000 0x200>; + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; - clocks = <&gcc SATA_PHY_CFG_CLK>; - clock-names = "cfg"; + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; - #phy-cells = <0>; status = "disabled"; }; - nand: nand-controller@1ac00000 { - compatible = "qcom,ipq806x-nand"; - reg = <0x1ac00000 0x800>; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - clocks = <&gcc EBI2_CLK>, - <&gcc EBI2_AON_CLK>; - clock-names = "core", "aon"; - - dmas = <&adm_dma 3>; - dma-names = "rxtx"; - qcom,cmd-crci = <15>; - qcom,data-crci = <3>; - + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges; status = "disabled"; - }; - sata: sata@29000000 { - compatible = "qcom,ipq806x-ahci", "generic-ahci"; - reg = <0x29000000 0x180>; + syscon-tcsr = <&tcsr>; - interrupts = ; + gsbi5_serial: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; - clocks = <&gcc SFAB_SATA_S_H_CLK>, - <&gcc SATA_H_CLK>, - <&gcc SATA_A_CLK>, - <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_face", "iface", "core", - "rxoob", "pmalive"; + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = ; - assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; - assigned-clock-rates = <100000000>, <100000000>; + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; - phys = <&sata_phy>; - phy-names = "sata-phy"; - status = "disabled"; - }; + #address-cells = <1>; + #size-cells = <0>; + }; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x00500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = ; - qfprom: qfprom@700000 { - compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - speedbin_efuse: speedbin@c0 { - reg = <0xc0 0x4>; - }; - tsens_calib: calib@400 { - reg = <0x400 0xb>; - }; - tsens_calib_backup: calib_backup@410 { - reg = <0x410 0xb>; + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; }; }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064", "syscon"; - clocks = <&pxo_board>, <&cxo_board>; - clock-names = "pxo", "cxo"; - reg = <0x00900000 0x4000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - tsens: thermal-sensor@900000 { - compatible = "qcom,ipq8064-tsens"; - - nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = ; - interrupt-names = "uplow"; + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; - #qcom,sensors = <11>; - #thermal-sensor-cells = <1>; - }; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; }; - rpm: rpm@108000 { - compatible = "qcom,rpm-ipq8064"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; + nand: nand-controller@1ac00000 { + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; - interrupts = , - , - ; - interrupt-names = "ack", "err", "wakeup"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; - clocks = <&gcc RPM_MSG_RAM_H_CLK>; - clock-names = "ram"; + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; - rpmcc: clock-controller { - compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; - #clock-cells = <1>; - clocks = <&pxo_board>; - clock-names = "pxo"; - }; - }; + #address-cells = <1>; + #size-cells = <0>; - tcsr: syscon@1a400000 { - compatible = "qcom,tcsr-ipq8064", "syscon"; - reg = <0x1a400000 0x100>; + status = "disabled"; }; - l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; - }; + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; - lcc: clock-controller@28000000 { - compatible = "qcom,lcc-ipq8064"; - reg = <0x28000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; }; pcie0: pci@1b500000 { @@ -1084,20 +1224,53 @@ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; }; - nss_common: syscon@03000000 { - compatible = "syscon"; - reg = <0x03000000 0x0000FFFF>; - }; - qsgmii_csr: syscon@1bb00000 { compatible = "syscon"; reg = <0x1bb00000 0x000001FF>; }; - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <7>; - snps,rd_osr_lmt = <7>; - snps,blen = <16 0 0 0 0 0 0>; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = ; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + + sata: sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = ; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; }; gmac0: ethernet@37000000 { @@ -1195,179 +1368,5 @@ status = "disabled"; }; - - hs_phy_0: phy@100f8800 { - compatible = "qcom,ipq806x-usb-phy-hs"; - reg = <0x100f8800 0x30>; - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - ss_phy_0: phy@100f8830 { - compatible = "qcom,ipq806x-usb-phy-ss"; - reg = <0x100f8830 0x30>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - usb3_0: usb3@100f8800 { - compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x100f8800 0x8000>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "core"; - - ranges; - - resets = <&gcc USB30_0_MASTER_RESET>; - reset-names = "master"; - - status = "disabled"; - - dwc3_0: dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = ; - phys = <&hs_phy_0>, <&ss_phy_0>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - snps,dis_u3_susphy_quirk; - }; - }; - - hs_phy_1: phy@110f8800 { - compatible = "qcom,ipq806x-usb-phy-hs"; - reg = <0x110f8800 0x30>; - clocks = <&gcc USB30_1_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - ss_phy_1: phy@110f8830 { - compatible = "qcom,ipq806x-usb-phy-ss"; - reg = <0x110f8830 0x30>; - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - status = "disabled"; - }; - - usb3_1: usb3@110f8800 { - compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x110f8800 0x8000>; - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "core"; - - ranges; - - resets = <&gcc USB30_1_MASTER_RESET>; - reset-names = "master"; - - status = "disabled"; - - dwc3_1: dwc3@11000000 { - compatible = "snps,dwc3"; - reg = <0x11000000 0xcd00>; - interrupts = ; - phys = <&hs_phy_1>, <&ss_phy_1>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - snps,dis_u3_susphy_quirk; - }; - }; - - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - sdcc1bam: dma-controller@12402000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12402000 0x8000>; - interrupts = ; - clocks = <&gcc SDC1_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - sdcc3bam: dma-controller@12182000 { - compatible = "qcom,bam-v1.3.0"; - reg = <0x12182000 0x8000>; - interrupts = ; - clocks = <&gcc SDC3_H_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - amba: amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-1_8v; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; - }; - - sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <192000000>; - sd-uhs-sdr104; - sd-uhs-ddr50; - vqmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; - dma-names = "tx", "rx"; - }; - }; - - sfpb_mutex: hwlock@1200600 { - compatible = "qcom,sfpb-mutex"; - reg = <0x01200600 0x100>; - - #hwlock-cells = <1>; - }; }; }; -- cgit From cc02fed341d5f5ea1af531ced213c41a836a3678 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 18 Jul 2022 17:38:15 +0200 Subject: ARM: dts: qcom: ipq8064: pad addresses to 8 digit Pad reg addresses to 8 digit to make sorting easier. Signed-off-by: Christian Marangi Reviewed-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220718153815.29414-2-ansuelsmth@gmail.com --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index e5b3bf723958..90c08b51680a 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -348,7 +348,7 @@ rpm: rpm@108000 { compatible = "qcom,rpm-ipq8064"; - reg = <0x108000 0x1000>; + reg = <0x00108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; interrupts = , @@ -389,7 +389,7 @@ qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; - reg = <0x800000 0x4000>; + reg = <0x00800000 0x4000>; gpio-controller; gpio-ranges = <&qcom_pinmux 0 0 69>; @@ -571,7 +571,7 @@ l2cc: clock-controller@2011000 { compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; + reg = <0x02011000 0x1000>; clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; clock-output-names = "acpu_l2_aux"; -- cgit From a73dd03bb2e0287497f8fe9e221c332369e05fca Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Fri, 22 Jul 2022 09:32:44 -0700 Subject: arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub Add nodes for the onboard USB hub on trogdor devices. Remove the 'always-on' property from the hub regulator, since the regulator is now managed by the onboard_usb_hub driver. For anyone using trogdor-based devices on Linux, it should be noted that this requires "CONFIG_USB_ONBOARD_HUB=y". Signed-off-by: Matthias Kaehlcke Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220722093238.v24.1.I7a1a6448d50bdd38e6082204a9818c59cc7a9bfd@changeid --- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 19 ++++++++----------- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 12 +++++------- .../arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts | 11 ++++------- arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 ++++++++----------- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 20 +++++++++++++++++++- 5 files changed, 44 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index bfbf26fd2cd4..d49de65aa960 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -16,17 +16,6 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided @@ -35,3 +24,11 @@ */ lane-polarities = <1 0>; }; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index d45a59afd7fc..80c7108bc51b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -16,13 +16,11 @@ compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; + +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; }; -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index 76a130bad60a..8467ff41e6d5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -34,13 +34,10 @@ /delete-node/ charger-thermistor@0; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; }; -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 59a23d0e9651..bc097d1b1b23 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -44,17 +44,6 @@ ap_ts_pen_1v8: &i2c4 { compatible = "auo,b116xa01"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sdhc_2 { status = "okay"; }; @@ -63,6 +52,14 @@ ap_ts_pen_1v8: &i2c4 { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; +&usb_hub_2_x { + vdd-supply = <&pp3300_l7c>; +}; + +&usb_hub_3_x { + vdd-supply = <&pp3300_l7c>; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index b5f534db135a..eae22e6e97c1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -299,7 +299,7 @@ pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_hub>; - regulator-always-on; + /* The BIOS leaves this regulator on */ regulator-boot-on; vin-supply = <&pp3300_a>; @@ -936,6 +936,24 @@ ap_spi_fp: &spi10 { &usb_1_dwc3 { dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; }; &usb_1_hsphy { -- cgit From dc94156c6694e0ecee32870df94ed8fae07327ca Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Fri, 22 Jul 2022 09:32:45 -0700 Subject: arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub Add nodes for the onboard USB hub on herobrine devices. Remove the 'always-on' property from the hub regulator, since the regulator is now managed by the onboard_usb_hub driver. This requires "CONFIG_USB_ONBOARD_HUB=y". Signed-off-by: Matthias Kaehlcke Reviewed-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220722093238.v24.2.I18481b296484eec47bdc292a31fa46fa8c655ca9@changeid --- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 74747c4a858a..c11e37160f34 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -144,8 +144,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* The BIOS leaves this regulator on */ regulator-boot-on; - regulator-always-on; gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -604,6 +604,25 @@ ap_ec_spi: &spi10 { &usb_1_dwc3 { dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + vdd-supply = <&pp3300_hub>; + peer-hub = <&usb_hub_2_x>; + }; }; &usb_1_hsphy { -- cgit From b716f7981e288e1367376903bc948bd9cf404440 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Thu, 8 Sep 2022 09:04:51 +0200 Subject: ARM: dts: lan966x: disable aes Disable AES node on lan966x pcb8290, pcb891 and pcb8309 because these boards have lan966x that uses secure OS which reserves the AES block. Therefore it can't be exposed to non-secure world. Signed-off-by: Horatiu Vultur Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220908070451.3730608-1-horatiu.vultur@microchip.com --- arch/arm/boot/dts/lan966x-pcb8290.dts | 4 ++++ arch/arm/boot/dts/lan966x-pcb8291.dts | 4 ++++ arch/arm/boot/dts/lan966x-pcb8309.dts | 4 ++++ 3 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts index 2e091180a64c..77187f59f04d 100644 --- a/arch/arm/boot/dts/lan966x-pcb8290.dts +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts @@ -21,6 +21,10 @@ }; }; +&aes { + status = "disabled"; /* Reserved by secure OS */ +}; + &gpio { miim_a_pins: mdio-pins { /* MDC, MDIO */ diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 289a31649422..f4f054cdf2a8 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -53,6 +53,10 @@ }; }; +&aes { + status = "disabled"; /* Reserved by secure OS */ +}; + &gpio { fc3_b_pins: fc3-b-pins { /* RX, TX */ diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts index cfd7c8933703..c436cd20d4b4 100644 --- a/arch/arm/boot/dts/lan966x-pcb8309.dts +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts @@ -97,6 +97,10 @@ }; }; +&aes { + status = "disabled"; /* Reserved by secure OS */ +}; + &flx3 { atmel,flexcom-mode = ; status = "okay"; -- cgit From 7ea519de7186d30d2147dcc11bc249c0a3ce86ff Mon Sep 17 00:00:00 2001 From: Jerry Ray Date: Fri, 9 Sep 2022 11:30:22 -0500 Subject: dts: arm: at91: Add SAMA5D3-EDS Board The SAMA5D3-EDS board is an Ethernet Development Platform allowing for evaluating many Microchip ethernet switch and PHY products. Various daughter cards can connect via an RGMII connector or an RMII connector. The EDS board is not intended for stand-alone use and has no ethernet capabilities when no daughter board is connected. As such, this device tree is intended to be used with a DT overlay defining the add-on board. To better ensure consistency, some items are defined here as a form of documentation so that all add-on overlays will use the same terms. Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM Signed-off-by: Jerry Ray [claudiu.beznea: s/gpio-inputs/gpio-keys in at91-sama5d3_eds.dts] Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220909163022.13022-2-jerry.ray@microchip.com --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sama5d3_eds.dts | 307 +++++++++++++++++++++++++++++++++ 2 files changed, 308 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sama5d3_eds.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 595e870750cd..98ffdf299809 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -61,6 +61,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ + at91-sama5d3_eds.dtb \ at91-sama5d3_ksz9477_evb.dtb \ at91-sama5d3_xplained.dtb \ at91-dvk_som60.dtb \ diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts new file mode 100644 index 000000000000..c287b03d768b --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet + * Development System board. + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Jerry Ray + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Ethernet Development System"; + compatible = "microchip,sama5d3-eds", "atmel,sama5d36", + "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + button-3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + }; + + vcc_3v3_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_2v5_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vcc_3v3_reg>; + }; + + vcc_1v8_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_3v3_reg>; + }; + + vcc_1v2_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_mmc0_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "mmc0-card-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; + gpio = <&pioE 2 GPIO_ACTIVE_LOW>; + }; +}; + +&can0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-0 = <&pinctrl_i2c0_pu>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&pinctrl_i2c2_pu>; + status = "okay"; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&mmc0 { + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 + &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + board { + pinctrl_i2c0_pu: i2c0-pu { + atmel,pins = + , + ; + }; + + pinctrl_i2c2_pu: i2c2-pu { + atmel,pins = + , + ; + }; + + pinctrl_key_gpio: key-gpio-0 { + atmel,pins = + ; + }; + + pinctrl_mmc0_cd: mmc0-cd { + atmel,pins = + ; + }; + + /* Reserved for reset signal to the RGMII connector. */ + pinctrl_rgmii_rstn: rgmii-rstn { + atmel,pins = + ; + }; + + /* Reserved for an interrupt line from the RMII and RGMII connectors. */ + pinctrl_spi_irqn: spi-irqn { + atmel,pins = + ; + }; + + pinctrl_spi0_cs: spi0-cs-default { + atmel,pins = + ; + }; + + pinctrl_spi1_cs: spi1-cs-default { + atmel,pins = ; + }; + + pinctrl_usba_vbus: usba-vbus { + atmel,pins = + ; + }; + + pinctrl_usb_default: usb-default { + atmel,pins = + ; + }; + + /* Reserved for VBUS fault interrupt. */ + pinctrl_vbusfault_irqn: vbusfault-irqn { + atmel,pins = + ; + }; + + pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default { + atmel,pins = ; + }; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&spi0 { + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi0_cs>; + cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; + cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&usb0 { /* USB Device port with VBUS detection. */ + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { /* 3-port Host. First port is unused. */ + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_HIGH + &pioE 4 GPIO_ACTIVE_HIGH + >; + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; -- cgit From 0209861877531ae0744552f3fd0531303d665b52 Mon Sep 17 00:00:00 2001 From: Furkan Kardame Date: Mon, 27 Jun 2022 23:22:08 +0300 Subject: arm64: dts: rockchip: Enable video output on rk3566-roc-pc Add the device tree nodes to enable video output on the Station M2. Enable the GPU and HDMI nodes and fix the GPU regulator range. Signed-off-by: Furkan Kardame Link: https://lore.kernel.org/r/20220627202208.45770-1-f.kardame@manjaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 57759b66d44d..dba648c2f57e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -4,6 +4,7 @@ #include #include +#include #include "rk3566.dtsi" / { @@ -27,6 +28,17 @@ #clock-cells = <0>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -149,6 +161,29 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -577,3 +612,20 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; -- cgit From 3a5247120668041c8e9eb190497296656b66bf9a Mon Sep 17 00:00:00 2001 From: Hugh Cole-Baker Date: Tue, 19 Oct 2021 22:58:43 +0100 Subject: arm64: dts: rockchip: enable gamma control on RK3399 Define the memory region on RK3399 VOPs containing the gamma LUT at base+0x2000. Signed-off-by: Hugh Cole-Baker Tested-by: Linus Heckemann Link: https://lore.kernel.org/r/20211019215843.42718-4-sigmaris@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index f4fbd5bece0e..92c2207e686c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1702,7 +1702,7 @@ vopl: vop@ff8f0000 { compatible = "rockchip,rk3399-vop-lit"; - reg = <0x0 0xff8f0000 0x0 0x3efc>; + reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>; interrupts = ; assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; assigned-clock-rates = <400000000>, <100000000>; @@ -1758,7 +1758,7 @@ vopb: vop@ff900000 { compatible = "rockchip,rk3399-vop-big"; - reg = <0x0 0xff900000 0x0 0x3efc>; + reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>; interrupts = ; assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; assigned-clock-rates = <400000000>, <100000000>; -- cgit From 68aa834823e09a540a23374129326a51efe877a3 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 29 Aug 2022 08:48:24 -0700 Subject: arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs There have been a few changes since the patch ("arm64: dts: qcom: Add LTE SKUs for sc7280-villager family") * New firmware reports LTE boards as "SKU 512" now. Old firmware will still report "SKU 0", but that's all pre-production and everyone will update. * It's been relaized that no "-rev0" boards were ever built that were WiFi-only. Thus we don't two entries for -rev0. Adjust the organization a bit. Signed-off-by: Douglas Anderson Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220829084732.2.I22e256d1ebac577a91fac44d1d12919be7111cd4@changeid --- arch/arm64/boot/dts/qcom/Makefile | 1 - .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 - .../boot/dts/qcom/sc7280-herobrine-villager-r0.dts | 321 +------------------- .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 2 +- .../boot/dts/qcom/sc7280-herobrine-villager-r1.dts | 4 +- .../boot/dts/qcom/sc7280-herobrine-villager.dtsi | 326 +++++++++++++++++++++ 6 files changed, 332 insertions(+), 336 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 68a172c4c748..d7669a7cee9f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -107,7 +107,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts deleted file mode 100644 index 672cb78e3088..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Villager board device tree source - * - * Copyright 2022 Google LLC. - */ - -#include "sc7280-herobrine-villager-r0.dts" -#include "sc7280-herobrine-lte-sku.dtsi" - -/ { - model = "Google Villager (rev0) with LTE"; - compatible = "google,villager-rev0-sku0", "qcom,sc7280"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts index cbd8a2d1ef2a..73e24cc55a09 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -7,327 +7,10 @@ /dts-v1/; -#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Google Villager (rev0)"; compatible = "google,villager-rev0", "qcom,sc7280"; }; - -/* - * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES - * - * Sort order matches the order in the parent files (parents before children). - */ - -&pp3300_codec { - status = "okay"; -}; - -/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ - -ap_tp_i2c: &i2c0 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - - hid-descr-addr = <0x20>; - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ts_i2c: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; - - interrupt-parent = <&tlmm>; - interrupts = <55 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - - vcc33-supply = <&ts_avdd>; - }; -}; - -&ap_sar_sensor_i2c { - status = "okay"; -}; - -&ap_sar_sensor0 { - status = "okay"; -}; - -&ap_sar_sensor1 { - status = "okay"; -}; - -&mdss_edp { - status = "okay"; -}; - -&mdss_edp_phy { - status = "okay"; -}; - -/* For nvme */ -&pcie1 { - status = "okay"; -}; - -/* For nvme */ -&pcie1_phy { - status = "okay"; -}; - -&pwmleds { - status = "okay"; -}; - -/* For eMMC */ -&sdhc_1 { - status = "okay"; -}; - -/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ - -&ts_rst_conn { - bias-disable; -}; - -/* PINCTRL - BOARD-SPECIFIC */ - -/* - * Methodology for gpio-line-names: - * - If a pin goes to herobrine board and is named it gets that name. - * - If a pin goes to herobrine board and is not named, it gets no name. - * - If a pin is totally internal to Qcard then it gets Qcard name. - * - If a pin is not hooked up on Qcard, it gets no name. - */ - -&pm8350c_gpios { - gpio-line-names = "FLASH_STROBE_1", /* 1 */ - "AP_SUSPEND", - "PM8008_1_RST_N", - "", - "", - "", - "PMIC_EDP_BL_EN", - "PMIC_EDP_BL_PWM", - ""; -}; - -&tlmm { - gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ - "AP_TP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_SAR_SDA", - "AP_SAR_SCL", - "PRB_SC_GPIO_6", - "TP_INT_ODL", - "HP_I2C_SDA", - "HP_I2C_SCL", - - "GNSS_L1_EN", /* 10 */ - "GNSS_L5_EN", - "SPI_AP_MOSI", - "SPI_AP_MISO", - "SPI_AP_CLK", - "SPI_AP_CS0_L", - /* - * AP_FLASH_WP is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_OD. - */ - "AP_FLASH_WP", - "", - "AP_EC_INT_L", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "", - "PM8008_IRQ_1", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "MOS_BT_UART_CTS", - "MOS_BT_UART_RFR", - - "MOS_BT_UART_TX", /* 30 */ - "MOS_BT_UART_RX", - "PRB_SC_GPIO_32", - "HUB_RST_L", - "", - "", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - - "AP_EC_SPI_MISO", /* 40 */ - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "LCM_RST_L", - "EARLY_EUD_N", - "", - "DP_HOT_PLUG_DET", - "IO_BRD_MLB_ID0", - "IO_BRD_MLB_ID1", - - "IO_BRD_MLB_ID2", /* 50 */ - "SSD_EN", - "TS_I2C_SDA_CONN", - "TS_I2C_CLK_CONN", - "TS_RST_CONN", - "TS_INT_CONN", - "AP_I2C_TPM_SDA", - "AP_I2C_TPM_SCL", - "PRB_SC_GPIO_58", - "PRB_SC_GPIO_59", - - "EDP_HOT_PLUG_DET_N", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "AMP_EN", - "CAM0_MCLK_GPIO_64", - "CAM1_MCLK_GPIO_65", - "WF_CAM_MCLK", - "PRB_SC_GPIO_67", - "FPMCU_BOOT0", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "", - "", - "WF_CAM_SDA", - "WF_CAM_SCL", - "", - "", - "EN_FP_RAILS", - "FP_RST_L", - "PCIE1_CLKREQ_ODL", - - "EN_PP3300_DX_EDP", /* 80 */ - "SC_GPIO_81", - "FORCED_USB_BOOT", - "WCD_RESET_N", - "MOS_WLAN_EN", - "MOS_BT_EN", - "MOS_SW_CTRL", - "MOS_PCIE0_RST", - "MOS_PCIE0_CLKREQ_N", - "MOS_PCIE0_WAKE_N", - - "MOS_LAA_AS_EN", /* 90 */ - "SD_CD_ODL", - "", - "", - "MOS_BT_WLAN_SLIMBUS_CLK", - "MOS_BT_WLAN_SLIMBUS_DAT0", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "", - "", - "GSC_AP_INT_ODL", - "EN_PP3300_CODEC", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM1_DATA_GPIO_109", - - "UIM1_CLK_GPIO_110", /* 110 */ - "UIM1_RESET_GPIO_111", - "PRB_SC_GPIO_112", - "UIM0_DATA", - "UIM0_CLK", - "UIM0_RST", - "UIM0_PRESENT_ODL", - "SDM_RFFE0_CLK", - "SDM_RFFE0_DATA", - "WF_CAM_EN", - - "FASTBOOT_SEL_0", /* 120 */ - "SC_GPIO_121", - "FASTBOOT_SEL_1", - "SC_GPIO_123", - "FASTBOOT_SEL_2", - "SM_RFFE4_CLK_GRFC_8", - "SM_RFFE4_DATA_GRFC_9", - "WLAN_COEX_UART1_RX", - "WLAN_COEX_UART1_TX", - "PRB_SC_GPIO_129", - - "LCM_ID0", /* 130 */ - "LCM_ID1", - "", - "SDR_QLINK_REQ", - "SDR_QLINK_EN", - "QLINK0_WMSS_RESET_N", - "SMR526_QLINK1_REQ", - "SMR526_QLINK1_EN", - "SMR526_QLINK1_WMSS_RESET_N", - "PRB_SC_GPIO_139", - - "SAR1_IRQ_ODL", /* 140 */ - "SAR0_IRQ_ODL", - "PRB_SC_GPIO_142", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA0", - "WCD_SWR_TX_DATA1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA0", - "WCD_SWR_RX_DATA1", - - "DMIC01_CLK", /* 150 */ - "DMIC01_DATA", - "DMIC23_CLK", - "DMIC23_DATA", - "", - "", - "EC_IN_RW_ODL", - "HUB_EN", - "WCD_SWR_TX_DATA2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "MOS_BLE_UART_TX", - "MOS_BLE_UART_RX", - "", - "", - ""; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts index 2f05a19cc388..f1017809e5da 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -10,5 +10,5 @@ / { model = "Google Villager (rev1+) with LTE"; - compatible = "google,villager-sku0", "qcom,sc7280"; + compatible = "google,villager-sku512", "qcom,sc7280"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts index fd202a8f6a33..cfc648726930 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -5,7 +5,9 @@ * Copyright 2022 Google LLC. */ -#include "sc7280-herobrine-villager-r0.dts" +/dts-v1/; + +#include "sc7280-herobrine-villager.dtsi" #include "sc7280-herobrine-audio-wcd9385.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi new file mode 100644 index 000000000000..4566722bf4dd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; -- cgit From 300218b0503d40f3efc69363ca70b7f75c3ba81f Mon Sep 17 00:00:00 2001 From: Peter Chiu Date: Thu, 1 Sep 2022 21:05:52 +0800 Subject: arm64: dts: mt7986: add built-in Wi-Fi device nodes This enables built-in 802.11ax Wi-Fi support. Reviewed-by: Sam Shih Reviewed-by: Ryder Lee Signed-off-by: Peter Chiu Link: https://lore.kernel.org/r/20220901130552.26234-1-chui-hao.chiu@mediatek.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 38 ++++++++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 23 ++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 40 ++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts index 882277a52b69..afe37b702eef 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts @@ -115,6 +115,13 @@ status = "okay"; }; +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; +}; + &pio { uart1_pins: uart1-pins { mux { @@ -129,4 +136,35 @@ groups = "uart2"; }; }; + + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA"; + drive-strength = <4>; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index e3a407d03551..890ded0efc51 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include / { interrupt-parent = <&gic>; @@ -70,6 +71,11 @@ reg = <0 0x43000000 0 0x30000>; no-map; }; + + wmcpu_emi: wmcpu-reserved@4fc00000 { + no-map; + reg = <0 0x4fc00000 0 0x00100000>; + }; }; timer { @@ -261,6 +267,23 @@ #size-cells = <0>; status = "disabled"; }; + + wifi: wifi@18000000 { + compatible = "mediatek,mt7986-wmac"; + resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; + reset-names = "consys"; + clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>, + <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; + clock-names = "mcu", "ap2conn"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; + interrupts = , + , + , + ; + memory-region = <&wmcpu_emi>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts index 0f49d5764ff3..3443013b5971 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts @@ -98,3 +98,43 @@ }; }; }; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; +}; + +&pio { + wf_2g_5g_pins: wf-2g-5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; -- cgit From aaf85b46aa4145f5ec7aa0a9bdf4a93b23474524 Mon Sep 17 00:00:00 2001 From: Krishna chaitanya chundru Date: Thu, 8 Sep 2022 14:16:15 +0530 Subject: arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks Add missing aggre0, aggre1 clocks. Signed-off-by: Krishna chaitanya chundru Reviewed-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1662626776-19636-2-git-send-email-quic_krichai@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 44e9576afc03..16cf0c6cb92f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2044,7 +2044,9 @@ <&gcc GCC_PCIE_1_SLV_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&gcc GCC_DDRSS_PCIE_SF_CLK>; + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; clock-names = "pipe", "pipe_mux", @@ -2056,7 +2058,9 @@ "bus_slave", "slave_q2a", "tbu", - "ddrss_sf_tbu"; + "ddrss_sf_tbu", + "aggre0", + "aggre1"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; -- cgit From 8cd012f75178c4dffe8df692aa991e829286a8d4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Sep 2022 10:10:46 +0200 Subject: arm64: dts: qcom: pmi8994: add missing MPP compatible fallback Bindings require usage of generic MPP fallback in compatible: qcom/apq8094-sony-xperia-kitakami-karin_windy.dtb: pmic@2: mpps@a000:compatible: ['qcom,pmi8994-mpp'] is too short Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220908081050.29751-1-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/pmi8994.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 2e8b58f944e9..542c215dde10 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -21,7 +21,7 @@ }; pmi8994_mpps: mpps@a000 { - compatible = "qcom,pmi8994-mpp"; + compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; gpio-ranges = <&pmi8994_mpps 0 0 4>; -- cgit From 308ff92e77aa2febec9b81b6917ebb0f38da8cb5 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Sep 2022 10:10:47 +0200 Subject: arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings Bindings expect resin node to be named "resin": qcom/msm8992-msft-lumia-octagon-talkman.dtb: pmic@0: pon@800: Unevaluated properties are not allowed ('volwnkey' was unexpected) Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220908081050.29751-2-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 61ec905025b0..f9d8bd09e074 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -499,7 +499,7 @@ linux,code = ; }; - volwnkey { + resin { compatible = "qcom,pm8941-resin"; interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; -- cgit From b94d7c1fc7c6ac4e2ce83e9fc6a84fc3034b631c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Sep 2022 10:10:48 +0200 Subject: arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema Bindings expect PMIC GPIO pin configuration nodes to be named with '-state' suffix: qcom/msm8996-xiaomi-scorpio.dtb: pmic@0: gpio@c000: 'irled-default', 'keypad-default' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Drop also additional indentation via "pinconf" to make the code a bit smaller. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220908081050.29751-3-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 16 +++++++--------- arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 16 +++++++--------- 2 files changed, 14 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index ef9a8aa9c2b9..77819186086a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -651,15 +651,13 @@ }; &pm8994_gpios { - irled_default: irled-default { - pinconf { - pins = "gpio5"; - function = PMIC_GPIO_FUNC_FUNC1; - output-low; - qcom,drive-strength = ; - power-source = ; - bias-disable; - }; + irled_default: irled-default-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; }; wlan_en_default: wlan-en-state { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index bc8ebf10be9c..79be5fb1295b 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -279,15 +279,13 @@ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ - keypad_default: keypad-default { - pinconf { - pins = "gpio7", "gpio10"; - function = PMIC_GPIO_FUNC_FUNC1; - output-low; - qcom,drive-strength = ; - power-source = ; - bias-disable; - }; + keypad_default: keypad-default-state { + pins = "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_FUNC1; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; }; }; -- cgit From afa774bc17e607ef98cc660657cf5208a39591a2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Sep 2022 10:10:49 +0200 Subject: arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs Bindings require all PMIC GPIO nodes to have two compatibles - specific followed by SPMI or SSBI fallback: qcom/sa8295p-adp.dtb: pmic@8: gpio@c000:compatible: ['qcom,pm8150-gpio'] is too short Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220908081050.29751-4-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index ca5f5ad32ce5..98f8420488b6 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -183,7 +183,7 @@ #size-cells = <0>; pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; @@ -199,7 +199,7 @@ #size-cells = <0>; pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; @@ -215,7 +215,7 @@ #size-cells = <0>; pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; @@ -231,7 +231,7 @@ #size-cells = <0>; pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; -- cgit From aa510b0c1fa34338babbde366b2c98b9b39aa282 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Sep 2022 10:10:50 +0200 Subject: arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs The Qualcomm PMIC GPIO bindings require gpio-ranges property: qcom/sa8295p-adp.dtb: pmic@8: gpio@c000: 'gpio-ranges' is a required property Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220908081050.29751-5-krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 98f8420488b6..b608b82dff03 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -186,6 +186,7 @@ compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450a_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -202,6 +203,7 @@ compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450c_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -218,6 +220,7 @@ compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450e_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -234,6 +237,7 @@ compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8450g_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; -- cgit From 578980728868fcd99bbb5af12e50b38d2e66f5aa Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 17 Aug 2022 12:33:56 -0700 Subject: arm64: dts: rockchip: Support gru-scarlet sku{2,4} variants The Gru-Scarlet family includes a variety of SKU identifiers, using parts of a 3-bit space {0..7}. SKU2 and SKU4 devices (under a few different manufacturer names) also use the Innolux display. Without this, a SKU2 device may non-deterministically (depending on the matching order of DTBs and bootloader behavior) select either one of the INX DTBs (rk3399-gru-scarlet-dumo.dtb or rk3399-gru-scarlet-inx.dtb) or the KingDisplay DTB (rk3399-gru-scarlet-kd.dtb), to ill effect. For reference, the original vendor tree source: CHROMIUM: arm64: dts: rockchip: add sku{0,2,4} compatibility https://chromium.googlesource.com/chromiumos/third_party/kernel/+/f6ed665c9e2eb37fb2680debbb36ec9fb0e8fb97 CHROMIUM: arm64: dts: rockchip: scarlet: add SKU0 device tree https://chromium.googlesource.com/chromiumos/third_party/kernel/+/9987c8776f4b087d135d761e59f7fa6cc83fc7fc Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20220817123350.2.I5f4fd0808a927b08e267c189712fb4a85931fd3b@changeid Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts index 2d721a974790..5d1879033e7c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts @@ -11,17 +11,29 @@ / { model = "Google Scarlet"; - compatible = "google,scarlet-rev15-sku6", "google,scarlet-rev15", + compatible = "google,scarlet-rev15-sku2", "google,scarlet-rev15-sku4", + "google,scarlet-rev15-sku6", "google,scarlet-rev15", + "google,scarlet-rev14-sku2", "google,scarlet-rev14-sku4", "google,scarlet-rev14-sku6", "google,scarlet-rev14", + "google,scarlet-rev13-sku2", "google,scarlet-rev13-sku4", "google,scarlet-rev13-sku6", "google,scarlet-rev13", + "google,scarlet-rev12-sku2", "google,scarlet-rev12-sku4", "google,scarlet-rev12-sku6", "google,scarlet-rev12", + "google,scarlet-rev11-sku2", "google,scarlet-rev11-sku4", "google,scarlet-rev11-sku6", "google,scarlet-rev11", + "google,scarlet-rev10-sku2", "google,scarlet-rev10-sku4", "google,scarlet-rev10-sku6", "google,scarlet-rev10", + "google,scarlet-rev9-sku2", "google,scarlet-rev9-sku4", "google,scarlet-rev9-sku6", "google,scarlet-rev9", + "google,scarlet-rev8-sku2", "google,scarlet-rev8-sku4", "google,scarlet-rev8-sku6", "google,scarlet-rev8", + "google,scarlet-rev7-sku2", "google,scarlet-rev7-sku4", "google,scarlet-rev7-sku6", "google,scarlet-rev7", + "google,scarlet-rev6-sku2", "google,scarlet-rev6-sku4", "google,scarlet-rev6-sku6", "google,scarlet-rev6", + "google,scarlet-rev5-sku2", "google,scarlet-rev5-sku4", "google,scarlet-rev5-sku6", "google,scarlet-rev5", + "google,scarlet-rev4-sku2", "google,scarlet-rev4-sku4", "google,scarlet-rev4-sku6", "google,scarlet-rev4", "google,scarlet", "google,gru", "rockchip,rk3399"; }; -- cgit From 1c33f8508b625e8c792b396155f6ef7cbc8f4212 Mon Sep 17 00:00:00 2001 From: Markus Reichl Date: Thu, 15 Sep 2022 13:11:36 +0200 Subject: arm64: dts: rockchip: Add HDMI supplies on rk3399-roc-pc Add avdd-0v9-supply and avdd-1v8-supply to hdmi node for rk3399-roc-pc to silence dmesg warning and match the name of the 1v8 supply to the circuit sheet. Signed-off-by: Markus Reichl Link: https://lore.kernel.org/r/20220915111138.1108-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index acb174d3a8c5..2f4b1b2e3ac7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -271,6 +271,8 @@ }; &hdmi { + avdd-0v9-supply = <&vcca0v9_hdmi>; + avdd-1v8-supply = <&vcca1v8_hdmi>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; @@ -369,8 +371,8 @@ }; }; - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; -- cgit From ed22cc93abae68f9d3fc4957c20a1d902cf28882 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 15 Sep 2022 16:34:30 +0200 Subject: arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size The size of the PCIe PHY serdes register region is 0x1c4 and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx). Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") Signed-off-by: Johan Hovold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220915143431.19842-1-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 251bc764cdc5..a47acf9bdf24 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -199,7 +199,7 @@ pcie_qmp0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x00086000 0x1000>; + reg = <0x00086000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -227,7 +227,7 @@ pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x0008e000 0x1000>; + reg = <0x0008e000 0x1c4>; #address-cells = <1>; #size-cells = <1>; ranges; -- cgit From 5ebb14aa5a193b3a6a5c359bdd4d3573cb14bdf1 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Fri, 29 Jul 2022 11:35:36 +0200 Subject: arm64: dts: mediatek: mt6795: Add CPUX system timer node Add a node for mt6795-systimer: this is necessary to start the System Timer(s) for all cores, finally making CNTVCT_EL0 usable. Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20220729093536.27623-1-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt6795.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index d4842b4a4eb7..46f0e54be766 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -230,6 +230,14 @@ reg = <0 0x10200620 0 0x20>; }; + systimer: timer@10200670 { + compatible = "mediatek,mt6795-systimer"; + reg = <0 0x10200670 0 0x10>; + interrupts = ; + clocks = <&system_clk>; + clock-names = "clk13m"; + }; + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit From 25ba74dd60022f2fa1630405d6eba7c37f45b13a Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Sat, 23 Apr 2022 17:50:57 +0200 Subject: ARM: dts: qcom: msm8226: Add ADSP node Add a node for the adsp found on msm8226. Signed-off-by: Luca Weiss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220423155059.660387-3-luca@z3ntu.xyz --- arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts | 2 + arch/arm/boot/dts/qcom-msm8226.dtsi | 65 +++++++++++++++++++++++++ 2 files changed, 67 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts index ace8cea27949..818c1a201227 100644 --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -8,6 +8,8 @@ #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" +/delete-node/ &adsp_region; + / { model = "ASUS ZenWatch 2"; compatible = "asus,sparrow", "qcom,apq8026"; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 918ad686bfba..cf2d56929428 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include #include / { @@ -53,6 +54,11 @@ reg = <0x3000000 0x100000>; no-map; }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; }; smd { @@ -108,6 +114,31 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = ; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -506,6 +537,40 @@ reg = <0xfd484000 0x1000>; #hwlock-cells = <1>; }; + + adsp: remoteproc@fe200000 { + compatible = "qcom,msm8226-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8226_VDDCX>; + power-domain-names = "cx"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + + label = "lpass"; + }; + }; }; timer { -- cgit From 268c661c172d783540f34a132290e78342bae3c5 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Sat, 23 Apr 2022 17:50:58 +0200 Subject: ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP The customized reserved memory for ADSP is already configured, so we just need to enable the node. Signed-off-by: Luca Weiss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220423155059.660387-4-luca@z3ntu.xyz --- arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts index 818c1a201227..215613c65250 100644 --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -59,6 +59,10 @@ }; }; +&adsp { + status = "okay"; +}; + &blsp1_uart1 { status = "okay"; -- cgit From 5cbd20166f0ac7ae0272d25401b6ec5472482a19 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Sat, 23 Apr 2022 17:50:59 +0200 Subject: ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP Configure the reserved memory for ADSP and enable it. Signed-off-by: Luca Weiss Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220423155059.660387-5-luca@z3ntu.xyz --- arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index 2b7e52fda6a7..193569f0ca5f 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -8,6 +8,8 @@ #include "qcom-msm8226.dtsi" #include "qcom-pm8226.dtsi" +/delete-node/ &adsp_region; + / { model = "LG G Watch R"; compatible = "lg,lenok", "qcom,apq8026"; @@ -23,6 +25,13 @@ stdout-path = "serial0:115200n8"; }; + reserved-memory { + adsp_region: adsp@3300000 { + reg = <0x03300000 0x1400000>; + no-map; + }; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -38,6 +47,10 @@ }; }; +&adsp { + status = "okay"; +}; + &blsp1_i2c1 { status = "okay"; -- cgit From 677920072e9d757ae158d66b8fdb695992bb3f1a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 15 Sep 2022 16:34:31 +0200 Subject: arm64: dts: qcom: sm8450: fix UFS PHY serdes size The size of the UFS PHY serdes register region is 0x1c4 and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx). Fixes: 07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes") Signed-off-by: Johan Hovold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220915143431.19842-2-johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 1d878256028f..d32f08df743d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3147,7 +3147,7 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c4>; #address-cells = <2>; #size-cells = <2>; ranges; -- cgit From cd42b26a527f233827bb67231a04a2a9e40eae10 Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Thu, 21 Jul 2022 19:50:40 +0530 Subject: arm64: tegra: Add regulators required for PCIe Add regulator supplies required for PCIe functionality. The supplies include 1.8V, 3.3V and 12V. Signed-off-by: Vidya Sagar Signed-off-by: Thierry Reding --- .../arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index 798de9226ba5..9e4d72cfa69f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -6,6 +6,42 @@ model = "NVIDIA Jetson AGX Orin"; compatible = "nvidia,p3701-0000", "nvidia,tegra234"; + vdd_1v8_ls: regulator-vdd-1v8-ls { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator-vdd-12v-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V_PCIE"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + enable-active-low; + }; + bus@0 { spi@3270000 { status = "okay"; -- cgit From ec142c44b0261ee7569371e49b2bdb0809366b39 Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Thu, 21 Jul 2022 19:50:41 +0530 Subject: arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT Add P2U (PIPE to UPHY) and PCIe controller nodes to device tree. The Tegra234 SoC contains 10 PCIe controllers and 24 P2U instances grouped into three different PHY bricks namely High-Speed IO (HSIO-8 P2Us) NVIDIA High Speed (NVHS-8 P2Us) and Gigabit Ethernet (GBE-8 P2Us) respectively. Signed-off-by: Vidya Sagar Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 927 +++++++++++++++++++++++++++++++ 1 file changed, 927 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 81a0f599685f..248507ed0815 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -1081,6 +1081,198 @@ status = "okay"; }; + p2u_hsio_0: phy@3e00000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_1: phy@3e10000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_2: phy@3e20000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_3: phy@3e30000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_4: phy@3e40000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_5: phy@3e50000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_6: phy@3e60000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_7: phy@3e70000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_0: phy@3e90000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03e90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_1: phy@3ea0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ea0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_2: phy@3eb0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03eb0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_3: phy@3ec0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ec0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_4: phy@3ed0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ed0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_5: phy@3ee0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ee0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_6: phy@3ef0000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03ef0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_7: phy@3f00000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_0: phy@3f20000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_1: phy@3f30000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_2: phy@3f40000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_3: phy@3f50000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_4: phy@3f60000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_5: phy@3f70000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_6: phy@3f80000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f80000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_gbe_7: phy@3f90000 { + compatible = "nvidia,tegra234-p2u"; + reg = <0x03f90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -1495,6 +1687,741 @@ status = "okay"; }; + pcie@140a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CA>; + reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C8_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_8_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_8>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 8>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x32 0x40000000 0x32 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x35 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2a100000 0x00 0x2a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE8AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE8AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE8 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@140c0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CB>; + reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2c080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <9>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C9_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_9_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_9>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 9>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE9AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE9AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE9 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@140e0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; + reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2e080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <10>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_10>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 10>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x38 0x40000000 0x38 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x3b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x2e100000 0x00 0x2e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14100000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <1>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C1_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 1>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x20 0x80000000 0x20 0x80000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x20 0xa8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x30100000 0x00 0x30100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE1R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE1W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE1 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14120000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <2>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C2_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 2>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x20 0xc0000000 0x20 0xc0000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x20 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x32100000 0x00 0x32100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE2AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE2AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE2 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14140000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <3>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C3_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 3>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */ + <0x02000000 0x0 0x40000000 0x21 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE3W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE3 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14160000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE4 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@14180000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>; + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <0>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C0_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x24 0x40000000 0x24 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x27 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x38100000 0x00 0x38100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE0 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@141a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */ + <0x02000000 0x0 0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@141c0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3c080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <6>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_6>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 6>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x2b 0x40000000 0x2b 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */ + <0x02000000 0x0 0x40000000 0x2e 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3c100000 0x00 0x3c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie@141e0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3e080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <7>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_7>; + reset-names = "apb", "core"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 7>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x2e 0x40000000 0x2e 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */ + <0x02000000 0x0 0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = ; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141c0000{ + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3c080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x2b 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_6>; + reset-names = "apb", "core"; + + interrupts = ; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 6>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@141e0000{ + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3e080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x2e 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <8>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_7>; + reset-names = "apb", "core"; + + interrupts = ; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 7>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + + pcie-ep@140e0000{ + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>; + reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x2e080000 0x0 0x00040000>, /* DBI space (256K) */ + <0x38 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + num-lanes = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>, + <&bpmp TEGRA234_RESET_PEX2_CORE_10>; + reset-names = "apb", "core"; + + interrupts = ; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 10>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>; + interconnect-names = "dma-mem", "write"; + iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>; + iommu-map-mask = <0x0>; + dma-coherent; + + status = "disabled"; + }; + sram@40000000 { compatible = "nvidia,tegra234-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x80000>; -- cgit From 1d61cbb79058a21be94b0ab7c1c3dca190b139ee Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Thu, 21 Jul 2022 19:50:42 +0530 Subject: arm64: tegra: Enable PCIe slots in P3737-0000 board Enable PCIe controller nodes to enable respective PCIe slots on P3737-0000 board. Following is the ownership of slots by different PCIe controllers. Controller-1 : On-board Broadcom WiFi controller Controller-4 : M.2 Key-M slot Controller-5 : CEM form-factor x8 slot Signed-off-by: Vidya Sagar Signed-off-by: Thierry Reding --- .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 51 ++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 02a10bb38562..dc11a4f4c10a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2111,4 +2111,55 @@ label = "NVIDIA Jetson AGX Orin APE"; }; + + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie-ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8_ls>; + + reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; }; -- cgit From 4f41e9d542758690be9fb665400b891f83233a08 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 7 Sep 2022 18:19:43 +0200 Subject: arm64: tegra: Fix up compatible for Tegra234 GPCDMA There is no need to list the Tegra194-specific compatible for Tegra234 because the backwards-compatibility goes back all the way to Tegra186. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 248507ed0815..4c75fa876225 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -23,7 +23,6 @@ gpcdma: dma-controller@2600000 { compatible = "nvidia,tegra234-gpcdma", - "nvidia,tegra194-gpcdma", "nvidia,tegra186-gpcdma"; reg = <0x2600000 0x210000>; resets = <&bpmp TEGRA234_RESET_GPCDMA>; -- cgit From 610cdf3186bc604961bf04851e300deefd318038 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 7 Jul 2022 09:48:15 +0200 Subject: arm64: tegra: Add MGBE nodes on Tegra234 Add device tree nodes for the four instances of the Multi-Gigabit Ethernet (MGBE) IP found on NVIDIA Tegra234 SoCs. Signed-off-by: Bhadram Varka Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 136 +++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 4c75fa876225..24e46e065b6b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -924,6 +924,142 @@ #mbox-cells = <2>; }; + ethernet@6800000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06800000 0x10000>, + <0x06810000 0x10000>, + <0x068a0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = ; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>, + <&bpmp TEGRA234_CLK_MGBE0_MAC>, + <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE0_TX>, + <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>, + <&bpmp TEGRA234_RESET_MGBE0_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>; + status = "disabled"; + }; + + ethernet@6900000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06900000 0x10000>, + <0x06910000 0x10000>, + <0x069a0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = ; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE1_APP>, + <&bpmp TEGRA234_CLK_MGBE1_MAC>, + <&bpmp TEGRA234_CLK_MGBE1_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE1_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE1_TX>, + <&bpmp TEGRA234_CLK_MGBE1_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE1_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE1_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE1_MAC>, + <&bpmp TEGRA234_RESET_MGBE1_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEBRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>; + status = "disabled"; + }; + + ethernet@6a00000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06a00000 0x10000>, + <0x06a10000 0x10000>, + <0x06aa0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = ; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE2_APP>, + <&bpmp TEGRA234_CLK_MGBE2_MAC>, + <&bpmp TEGRA234_CLK_MGBE2_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE2_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE2_TX>, + <&bpmp TEGRA234_CLK_MGBE2_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE2_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE2_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE2_MAC>, + <&bpmp TEGRA234_RESET_MGBE2_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBECRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>; + status = "disabled"; + }; + + ethernet@6b00000 { + compatible = "nvidia,tegra234-mgbe"; + reg = <0x06b00000 0x10000>, + <0x06b10000 0x10000>, + <0x06ba0000 0x10000>; + reg-names = "hypervisor", "mac", "xpcs"; + interrupts = ; + interrupt-names = "common"; + clocks = <&bpmp TEGRA234_CLK_MGBE3_APP>, + <&bpmp TEGRA234_CLK_MGBE3_MAC>, + <&bpmp TEGRA234_CLK_MGBE3_MAC_DIVIDER>, + <&bpmp TEGRA234_CLK_MGBE3_PTP_REF>, + <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT_M>, + <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT>, + <&bpmp TEGRA234_CLK_MGBE3_TX>, + <&bpmp TEGRA234_CLK_MGBE3_EEE_PCS>, + <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_INPUT>, + <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_M>, + <&bpmp TEGRA234_CLK_MGBE3_RX_PCS>, + <&bpmp TEGRA234_CLK_MGBE3_TX_PCS>; + clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m", + "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m", + "rx-pcs", "tx-pcs"; + resets = <&bpmp TEGRA234_RESET_MGBE3_MAC>, + <&bpmp TEGRA234_RESET_MGBE3_PCS>; + reset-names = "mac", "pcs"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEDRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_MGBEDWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF3>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>; + status = "disabled"; + }; + smmu_niso1: iommu@8000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; reg = <0x8000000 0x1000000>, -- cgit From 8aec2c17b95ed807f426bf5d7a2c9deeda482274 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 7 Jul 2022 09:48:16 +0200 Subject: arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit A Multi-Gigabit Ethernet (MGBE) instance drives the primary Ethernet port on the Jetson AGX Orin Developer Kit. Enable it. Signed-off-by: Bhadram Varka Signed-off-by: Thierry Reding --- .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index dc11a4f4c10a..2aded150fe04 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2017,6 +2017,27 @@ stdout-path = "serial0:115200n8"; }; + bus@0 { + ethernet@6800000 { + status = "okay"; + + phy-handle = <&mgbe0_phy>; + phy-mode = "usxgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + mgbe0_phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + + #phy-cells = <0>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; status = "okay"; -- cgit From a63c0cd83720c48c9f510aa5a48f2517abc206bd Mon Sep 17 00:00:00 2001 From: Diogo Ivo Date: Wed, 14 Sep 2022 12:12:20 +0100 Subject: arm64: dts: tegra: smaug: Add Bluetooth node The Google Pixel C contains a BRCM4354 Wi-Fi + BT module. Add a DT node for its BT functionality. Tested on Pixel C. Signed-off-by: Diogo Ivo Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 5f3a1c56b2eb..d693e7a071bd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -17,6 +17,7 @@ aliases { serial0 = &uarta; + serial3 = &uartd; }; chosen { @@ -1309,6 +1310,22 @@ status = "okay"; }; + uartd: serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <4000000>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wakeup"; + }; + }; + i2c@7000c400 { status = "okay"; clock-frequency = <1000000>; -- cgit From a1e3de6ea5193b5a50d0af6095234a6fe278b2c2 Mon Sep 17 00:00:00 2001 From: Diogo Ivo Date: Wed, 14 Sep 2022 12:12:21 +0100 Subject: arm64: dts: tegra: smaug: Add Wi-Fi node The Google Pixel C contains a BRCM4354 Wi-Fi + BT module. Add a DT node for its Wi-Fi functionality. Tested on Pixel C. Signed-off-by: Diogo Ivo Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index d693e7a071bd..7c569695b705 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1709,6 +1709,25 @@ }; }; + mmc@700b0200 { + power-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + non-removable; + vqmmc-supply = <&pp1800>; + vmmc-supply = <&pp3300>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wake"; + }; + }; + mmc@700b0600 { bus-width = <8>; non-removable; -- cgit From b0c1a994f66050034c970a8187d88d4e1283f9d9 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 2 Sep 2022 17:05:29 +0200 Subject: arm64: tegra: Fixup iommu-map property formatting Make sure that each phandle-array is enclosed in a set of angular brackets and properly indent each entry. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 17 ++++++++--------- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 17 ++++++++--------- 2 files changed, 16 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 59a10fb184f8..526272f76637 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1485,15 +1485,14 @@ iommus = <&smmu TEGRA186_SID_HOST1X>; /* Context isolation domains */ - iommu-map = < - 0 &smmu TEGRA186_SID_HOST1X_CTX0 1 - 1 &smmu TEGRA186_SID_HOST1X_CTX1 1 - 2 &smmu TEGRA186_SID_HOST1X_CTX2 1 - 3 &smmu TEGRA186_SID_HOST1X_CTX3 1 - 4 &smmu TEGRA186_SID_HOST1X_CTX4 1 - 5 &smmu TEGRA186_SID_HOST1X_CTX5 1 - 6 &smmu TEGRA186_SID_HOST1X_CTX6 1 - 7 &smmu TEGRA186_SID_HOST1X_CTX7 1>; + iommu-map = <0 &smmu TEGRA186_SID_HOST1X_CTX0 1>, + <1 &smmu TEGRA186_SID_HOST1X_CTX1 1>, + <2 &smmu TEGRA186_SID_HOST1X_CTX2 1>, + <3 &smmu TEGRA186_SID_HOST1X_CTX3 1>, + <4 &smmu TEGRA186_SID_HOST1X_CTX4 1>, + <5 &smmu TEGRA186_SID_HOST1X_CTX5 1>, + <6 &smmu TEGRA186_SID_HOST1X_CTX6 1>, + <7 &smmu TEGRA186_SID_HOST1X_CTX7 1>; dpaux1: dpaux@15040000 { compatible = "nvidia,tegra186-dpaux"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index d0ed55e5c860..ed2fd951122b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1869,15 +1869,14 @@ iommus = <&smmu TEGRA194_SID_HOST1X>; /* Context isolation domains */ - iommu-map = < - 0 &smmu TEGRA194_SID_HOST1X_CTX0 1 - 1 &smmu TEGRA194_SID_HOST1X_CTX1 1 - 2 &smmu TEGRA194_SID_HOST1X_CTX2 1 - 3 &smmu TEGRA194_SID_HOST1X_CTX3 1 - 4 &smmu TEGRA194_SID_HOST1X_CTX4 1 - 5 &smmu TEGRA194_SID_HOST1X_CTX5 1 - 6 &smmu TEGRA194_SID_HOST1X_CTX6 1 - 7 &smmu TEGRA194_SID_HOST1X_CTX7 1>; + iommu-map = <0 &smmu TEGRA194_SID_HOST1X_CTX0 1>, + <1 &smmu TEGRA194_SID_HOST1X_CTX1 1>, + <2 &smmu TEGRA194_SID_HOST1X_CTX2 1>, + <3 &smmu TEGRA194_SID_HOST1X_CTX3 1>, + <4 &smmu TEGRA194_SID_HOST1X_CTX4 1>, + <5 &smmu TEGRA194_SID_HOST1X_CTX5 1>, + <6 &smmu TEGRA194_SID_HOST1X_CTX6 1>, + <7 &smmu TEGRA194_SID_HOST1X_CTX7 1>; nvdec@15140000 { compatible = "nvidia,tegra194-nvdec"; -- cgit From b35f5b53a87b8415db242d332e517e145bf804be Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Wed, 7 Sep 2022 11:38:44 +0300 Subject: arm64: tegra: Add context isolation domains on Tegra234 Add Host1x context isolation domains on Tegra234. On Tegra234 we have two IOMMUs that are connected to Host1x-channel programmed engines, so we have to include domains for each of them. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 24e46e065b6b..5dc557becba5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -569,6 +569,24 @@ interconnect-names = "dma-mem"; iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>; + /* Context isolation domains */ + iommu-map = <0 &smmu_niso0 TEGRA234_SID_HOST1X_CTX0 1>, + <1 &smmu_niso0 TEGRA234_SID_HOST1X_CTX1 1>, + <2 &smmu_niso0 TEGRA234_SID_HOST1X_CTX2 1>, + <3 &smmu_niso0 TEGRA234_SID_HOST1X_CTX3 1>, + <4 &smmu_niso0 TEGRA234_SID_HOST1X_CTX4 1>, + <5 &smmu_niso0 TEGRA234_SID_HOST1X_CTX5 1>, + <6 &smmu_niso0 TEGRA234_SID_HOST1X_CTX6 1>, + <7 &smmu_niso0 TEGRA234_SID_HOST1X_CTX7 1>, + <8 &smmu_niso1 TEGRA234_SID_HOST1X_CTX0 1>, + <9 &smmu_niso1 TEGRA234_SID_HOST1X_CTX1 1>, + <10 &smmu_niso1 TEGRA234_SID_HOST1X_CTX2 1>, + <11 &smmu_niso1 TEGRA234_SID_HOST1X_CTX3 1>, + <12 &smmu_niso1 TEGRA234_SID_HOST1X_CTX4 1>, + <13 &smmu_niso1 TEGRA234_SID_HOST1X_CTX5 1>, + <14 &smmu_niso1 TEGRA234_SID_HOST1X_CTX6 1>, + <15 &smmu_niso1 TEGRA234_SID_HOST1X_CTX7 1>; + vic@15340000 { compatible = "nvidia,tegra234-vic"; reg = <0x15340000 0x00040000>; -- cgit From 0a4fa2504217f84411c3007dee0d954ae9579994 Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Thu, 1 Sep 2022 10:03:05 +0530 Subject: arm64: tegra: Enable HDA node for Jetson AGX Orin Enable HDA node for the Jetson AGX Orin platform. Signed-off-by: Mohan Kumar Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 2aded150fe04..57ab75328814 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2009,6 +2009,7 @@ hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; + status = "okay"; }; }; -- cgit From af4c27738c921bb1c346ba62e2672b48525fb213 Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 30 Aug 2022 10:57:36 +0530 Subject: arm64: tegra: Add iommus for HDA on Tegra234 Add the iommus property to the HDA node on Tegra234. Signed-off-by: Mohan Kumar Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 5dc557becba5..82903c95f5dd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -914,6 +914,7 @@ interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>, <&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>; interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_HDA>; status = "disabled"; }; -- cgit From 8e4428051df12f3574b5d7927821c6fb75098d9a Mon Sep 17 00:00:00 2001 From: Akhil R Date: Tue, 6 Sep 2022 20:17:15 +0530 Subject: arm64: tegra: Add GPCDMA support for Tegra I2C Add dma properties to support GPCDMA for I2C in Tegra 186 and later chips Signed-off-by: Akhil R Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 32 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 32 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 32 ++++++++++++++++++++++++++++++++ 3 files changed, 96 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 526272f76637..6602fe421ee8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -672,6 +672,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C1>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 21>, <&gpcdma 21>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -685,6 +689,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C3>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 23>, <&gpcdma 23>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -702,6 +710,10 @@ pinctrl-names = "default", "idle"; pinctrl-0 = <&state_dpaux1_i2c>; pinctrl-1 = <&state_dpaux1_off>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 26>, <&gpcdma 26>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -733,6 +745,10 @@ pinctrl-names = "default", "idle"; pinctrl-0 = <&state_dpaux_i2c>; pinctrl-1 = <&state_dpaux_off>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 30>, <&gpcdma 30>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -746,6 +762,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C7>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 27>, <&gpcdma 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -759,6 +779,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C9>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 31>, <&gpcdma 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1176,6 +1200,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C2>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 22>, <&gpcdma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1189,6 +1217,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C8>; reset-names = "i2c"; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 0>, <&gpcdma 0>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index ed2fd951122b..41f3a7e188d0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -805,6 +805,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C1>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 21>, <&gpcdma 21>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -830,6 +834,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C3>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 23>, <&gpcdma 23>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -847,6 +855,10 @@ pinctrl-0 = <&state_dpaux1_i2c>; pinctrl-1 = <&state_dpaux1_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 26>, <&gpcdma 26>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -864,6 +876,10 @@ pinctrl-0 = <&state_dpaux0_i2c>; pinctrl-1 = <&state_dpaux0_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 30>, <&gpcdma 30>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -881,6 +897,10 @@ pinctrl-0 = <&state_dpaux2_i2c>; pinctrl-1 = <&state_dpaux2_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 27>, <&gpcdma 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -898,6 +918,10 @@ pinctrl-0 = <&state_dpaux3_i2c>; pinctrl-1 = <&state_dpaux3_off>; pinctrl-names = "default", "idle"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 31>, <&gpcdma 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1565,6 +1589,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C2>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 22>, <&gpcdma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1578,6 +1606,10 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA194_RESET_I2C8>; reset-names = "i2c"; + iommus = <&smmu TEGRA194_SID_GPCDMA_0>; + dma-coherent; + dmas = <&gpcdma 0>, <&gpcdma 0>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 82903c95f5dd..0170bfa8a467 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -754,6 +754,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C1>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 21>, <&gpcdma 21>; + dma-names = "rx", "tx"; }; cam_i2c: i2c@3180000 { @@ -769,6 +773,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C3>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 23>, <&gpcdma 23>; + dma-names = "rx", "tx"; }; dp_aux_ch1_i2c: i2c@3190000 { @@ -784,6 +792,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C4>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 26>, <&gpcdma 26>; + dma-names = "rx", "tx"; }; dp_aux_ch0_i2c: i2c@31b0000 { @@ -799,6 +811,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C6>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 30>, <&gpcdma 30>; + dma-names = "rx", "tx"; }; dp_aux_ch2_i2c: i2c@31c0000 { @@ -814,6 +830,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C7>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 27>, <&gpcdma 27>; + dma-names = "rx", "tx"; }; dp_aux_ch3_i2c: i2c@31e0000 { @@ -829,6 +849,10 @@ clock-names = "div-clk", "parent"; resets = <&bpmp TEGRA234_RESET_I2C9>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 31>, <&gpcdma 31>; + dma-names = "rx", "tx"; }; spi@3270000 { @@ -1455,6 +1479,10 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_I2C2>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 22>, <&gpcdma 22>; + dma-names = "rx", "tx"; }; gen8_i2c: i2c@c250000 { @@ -1471,6 +1499,10 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_I2C8>; reset-names = "i2c"; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + dmas = <&gpcdma 0>, <&gpcdma 0>; + dma-names = "rx", "tx"; }; rtc@c2a0000 { -- cgit From 944ec7d1a39eb9a9127148395105a970ce32b61e Mon Sep 17 00:00:00 2001 From: Sergiu Moga Date: Tue, 13 Sep 2022 17:21:53 +0300 Subject: ARM: dts: at91: sama7g5: Swap rx and tx for spi11 Swap the rx and tx of the DMA related DT properties of the spi11 node in order to maintain consistency across Microchip/Atmel SoC files. Signed-off-by: Sergiu Moga Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220913142205.162399-2-sergiu.moga@microchip.com --- arch/arm/boot/dts/sama7g5.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index bb6d71e6dfeb..249f9c640b6c 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -866,9 +866,9 @@ #address-cells = <1>; #size-cells = <0>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>, - <&dma0 AT91_XDMAC_DT_PERID(28)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>, + <&dma0 AT91_XDMAC_DT_PERID(27)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; -- cgit From 7fca501460f6a6e97e15176eb6a648d02c90800c Mon Sep 17 00:00:00 2001 From: Sergiu Moga Date: Tue, 13 Sep 2022 17:21:54 +0300 Subject: ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1 Maintain consistency among the compatibles of the serial nodes of sam9x60ek and highlight the incremental characteristic of its serial IP's by making sure that all serial nodes contain both the sam9x60 and sam9260 usart/dbgu compatibles. Signed-off-by: Sergiu Moga Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220913142205.162399-3-sergiu.moga@microchip.com --- arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 7ade9979e1c6..67bce8d60908 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -258,7 +258,7 @@ status = "okay"; uart1: serial@200 { - compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 -- cgit From f9e1d0767fde8c2d7f06248232e98d38fd70e307 Mon Sep 17 00:00:00 2001 From: Sergiu Moga Date: Tue, 13 Sep 2022 17:21:55 +0300 Subject: ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes Add the missing required DT property `atmel,usart-mode` to the serial nodes of Atmel/Microchip DT files. Signed-off-by: Sergiu Moga Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com --- arch/arm/boot/dts/at91-sam9x60ek.dts | 1 + arch/arm/boot/dts/at91rm9200.dtsi | 6 ++++++ arch/arm/boot/dts/at91sam9260.dtsi | 8 ++++++++ arch/arm/boot/dts/at91sam9261.dtsi | 5 +++++ arch/arm/boot/dts/at91sam9263.dtsi | 5 +++++ arch/arm/boot/dts/at91sam9g45.dtsi | 6 ++++++ arch/arm/boot/dts/at91sam9n12.dtsi | 6 ++++++ arch/arm/boot/dts/at91sam9rl.dtsi | 6 ++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 7 +++++++ arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 2 ++ arch/arm/boot/dts/sam9x60.dtsi | 2 ++ arch/arm/boot/dts/sama5d2.dtsi | 11 +++++++++++ arch/arm/boot/dts/sama5d3.dtsi | 7 +++++++ arch/arm/boot/dts/sama5d3_uart.dtsi | 3 +++ arch/arm/boot/dts/sama5d4.dtsi | 9 +++++++++ arch/arm/boot/dts/sama7g5.dtsi | 5 +++++ 16 files changed, 89 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 67bce8d60908..4ba52ba11dc6 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -260,6 +260,7 @@ uart1: serial@200 { compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index d1181ead18e5..7a113325abb9 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -13,6 +13,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -596,6 +597,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -607,6 +609,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -620,6 +623,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -633,6 +637,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -646,6 +651,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; + atmel,usart-mode = ; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 9d9820db9482..789fe356dbf6 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -532,6 +533,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -543,6 +545,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -556,6 +559,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -569,6 +573,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -582,6 +587,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; + atmel,usart-mode = ; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -595,6 +601,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; + atmel,usart-mode = ; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -608,6 +615,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; + atmel,usart-mode = ; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 259aca565305..ee0bd1aceb3f 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -179,6 +180,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -192,6 +194,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -205,6 +208,7 @@ usart2: serial@fffb8000{ compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -301,6 +305,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index c080df8c2312..3ce9ea987312 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -540,6 +541,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -551,6 +553,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -564,6 +567,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -577,6 +581,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; + atmel,usart-mode = ; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 09794561c7ce..95f5d76234db 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -13,6 +13,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -675,6 +676,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + atmel,usart-mode = ; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -687,6 +689,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -700,6 +703,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -713,6 +717,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; + atmel,usart-mode = ; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -726,6 +731,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; + atmel,usart-mode = ; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 556f35ce49e3..83114d26f10d 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -593,6 +594,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -618,6 +620,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; + atmel,usart-mode = ; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; @@ -629,6 +632,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; @@ -640,6 +644,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; @@ -651,6 +656,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 12c634811820..364a2ff0a763 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -175,6 +176,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -188,6 +190,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -201,6 +204,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -214,6 +218,7 @@ usart3: serial@fffbc000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffbc000 0x200>; + atmel,usart-mode = ; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -322,6 +327,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index ea3b11336c79..0c26c925761b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -13,6 +13,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -674,6 +675,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -688,6 +690,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; + atmel,usart-mode = ; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; @@ -702,6 +705,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; @@ -716,6 +720,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; @@ -775,6 +780,7 @@ uart0: serial@f8040000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8040000 0x200>; + atmel,usart-mode = ; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -786,6 +792,7 @@ uart1: serial@f8044000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8044000 0x200>; + atmel,usart-mode = ; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 098d3fef5c37..a47c765e1b20 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -8,6 +8,7 @@ #include #include +#include / { aliases { @@ -44,6 +45,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; + atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index d3f60f6a456d..8f5477e307dd 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include #include / { @@ -583,6 +584,7 @@ dbgu: serial@fffff200 { compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = ; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2c50a021aa76..14c35c12a115 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include #include / { @@ -441,6 +442,7 @@ uart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; + atmel,usart-mode = ; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -457,6 +459,7 @@ uart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; + atmel,usart-mode = ; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -473,6 +476,7 @@ uart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; + atmel,usart-mode = ; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -530,6 +534,7 @@ uart5: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "usart"; @@ -600,6 +605,7 @@ uart6: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "usart"; @@ -769,6 +775,7 @@ uart3: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; + atmel,usart-mode = ; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | @@ -785,6 +792,7 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + atmel,usart-mode = ; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(43))>, @@ -810,6 +818,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "usart"; @@ -880,6 +889,7 @@ uart8: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usart"; @@ -951,6 +961,7 @@ uart9: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2d0935ad2225..bde8e92d60bb 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -194,6 +195,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; + atmel,usart-mode = ; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -208,6 +210,7 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; + atmel,usart-mode = ; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -222,6 +225,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; + atmel,usart-mode = ; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -356,6 +360,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; + atmel,usart-mode = ; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -370,6 +375,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; + atmel,usart-mode = ; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; @@ -464,6 +470,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; + atmel,usart-mode = ; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a3eaba995cf4..44d1173f2ffb 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include / { aliases { @@ -39,6 +40,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; + atmel,usart-mode = ; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -50,6 +52,7 @@ uart1: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x100>; + atmel,usart-mode = ; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 1e5c01898ccf..af62157ae214 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -278,6 +279,7 @@ uart0: serial@f8004000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8004000 0x100>; + atmel,usart-mode = ; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -437,6 +439,7 @@ usart0: serial@f802c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf802c000 0x100>; + atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -455,6 +458,7 @@ usart1: serial@f8030000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8030000 0x100>; + atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -490,6 +494,7 @@ uart1: serial@fc004000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc004000 0x100>; + atmel,usart-mode = ; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -508,6 +513,7 @@ usart2: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; + atmel,usart-mode = ; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -526,6 +532,7 @@ usart3: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + atmel,usart-mode = ; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -544,6 +551,7 @@ usart4: serial@fc010000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc010000 0x100>; + atmel,usart-mode = ; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) @@ -770,6 +778,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; + atmel,usart-mode = ; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 249f9c640b6c..7bd8ae8e8d38 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include / { model = "Microchip SAMA7G5 family SoC"; @@ -603,6 +604,7 @@ uart0: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "usart"; @@ -651,6 +653,7 @@ uart3: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "usart"; @@ -694,6 +697,7 @@ uart4: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "usart"; @@ -719,6 +723,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = ; interrupts = ; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; -- cgit From 27c92c60d1e6d37e2c34fc18e1e36186fade2186 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 16 Sep 2022 11:17:46 +0200 Subject: arm64: dts: rockchip: add i2s0 I2S/PDM/TDM 8ch controller to px30 The Rockchip PX30 SoC has three I2S controllers, i2s1 and i2s2 are 2-channel I2S/PCM controllers handled by the same controller driver, and i2s0 a 8-channel I2S/PCM/TDM controller handled by another controller driver. This adds the device tree node required to enable I2S0 on PX30. This was tested in a 2-channel I2S with TX BCLK/LRCK for both TX and RX (rockchip,trcm-sync-tx-only) setup on a soon-to-be-released board. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20220916091746.35108-1-foss+kernel@0leil.net Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 214f94fea3dc..bfa3580429d1 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -365,6 +365,28 @@ status = "disabled"; }; + i2s0_8ch: i2s@ff060000 { + compatible = "rockchip,px30-i2s-tdm"; + reg = <0x0 0xff060000 0x0 0x1000>; + interrupts = ; + clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac 16>, <&dmac 17>; + dma-names = "tx", "rx"; + rockchip,grf = <&grf>; + resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>; + reset-names = "tx-m", "rx-m"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx + &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx + &i2s0_8ch_sdo0 &i2s0_8ch_sdi0 + &i2s0_8ch_sdo1 &i2s0_8ch_sdi1 + &i2s0_8ch_sdo2 &i2s0_8ch_sdi2 + &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s1_2ch: i2s@ff070000 { compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff070000 0x0 0x1000>; -- cgit From fd573b2bf2d2cf61e835ea68bbaa34c71d4a70d7 Mon Sep 17 00:00:00 2001 From: Tianling Shen Date: Thu, 15 Sep 2022 10:25:11 +0800 Subject: arm64: dts: rockchip: Add RK3399 NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. Signed-off-by: Tianling Shen Link: https://lore.kernel.org/r/20220915022511.4267-2-cnsztl@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3399-nanopi-r4s-enterprise.dts | 29 ++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 94639380ec1e..8c15593c0ca4 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s-enterprise.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts new file mode 100644 index 000000000000..a23d11ca0eb6 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3399-nanopi-r4s.dts" + +/ { + model = "FriendlyElec NanoPi R4S Enterprise Edition"; + compatible = "friendlyarm,nanopi-r4s-enterprise", "rockchip,rk3399"; +}; + +&gmac { + nvmem-cells = <&mac_address>; + nvmem-cell-names = "mac-address"; +}; + +&i2c2 { + eeprom@51 { + compatible = "microchip,24c02", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + size = <256>; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@fa { + reg = <0xfa 0x06>; + }; + }; +}; -- cgit From 3d59187efc982bf20309ae2fb8514007f9bf2b4e Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 16 Sep 2022 16:01:24 +0530 Subject: arm64: dts: qcom: sc7280: Add required-opps for USB USB has a requirement to put a performance state vote on 'cx' while active. Use 'required-opps' to pass this information from device tree, and since all the GDSCs in GCC (including USB) are sub-domains of cx, we also add cx as a power-domain for GCC. Now when any of the consumers of the GDSCs (in this case USB) votes on a perforamance state, genpd framework can identify that the GDSC itself does not support a performance state and it then propogates the vote to the parent, which in this case is cx. This change would also mean that any GDSC in GCC thats left enabled during low power state (perhaps because its marked with a ALWAYS_ON flag) can prevent the system from entering low power since that would prevent cx from transitioning to low power. Ideally any consumers that would need to have their devices (partially) powered to support wakeups should look at making the resp. GDSCs transtion to a Retention (PWRSTS_RET) state instead of leaving them ALWAYS_ON. Signed-off-by: Rajendra Nayak Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220916103124.30581-1-quic_rjendra@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 16cf0c6cb92f..4489a77611e8 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -829,6 +829,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7280_CX>; }; ipcc: mailbox@408000 { @@ -3388,6 +3389,7 @@ "dm_hs_phy_irq"; power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -3650,6 +3652,7 @@ "ss_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; -- cgit From 2069c5265bb369c155b92c4ddf50ae7cc7e592c3 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 16 Sep 2022 08:28:36 -0700 Subject: ARM: dts: imx6qdl-gw52xx: add CAN regulator The GW52xx has a transceiver with a STBY pin connected to an IMX6 GPIO. Configure this as a regulator to drive it low when CAN is in use. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b1df2beb2832..728810b9d677 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -137,6 +137,16 @@ regulator-always-on; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can1>; + regulator-name = "can1_stby"; + gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -170,6 +180,7 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; status = "okay"; }; @@ -612,7 +623,6 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ >; }; @@ -702,6 +712,12 @@ >; }; + pinctrl_reg_can1: regcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -- cgit From ad928a743db8ccfae0939e2483cf65addca4a593 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 16 Sep 2022 08:30:02 -0700 Subject: ARM: dts: imx6qdl-gw53xx: add CAN regulator The GW53xx has a transceiver with a STBY pin connected to an IMX6 GPIO. Configure this as a regulator to drive it low when CAN is in use. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a0710d562766..6c0c109046d8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -129,6 +129,16 @@ regulator-always-on; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can1>; + regulator-name = "can1_stby"; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_h1_vbus"; @@ -170,6 +180,7 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; status = "okay"; }; @@ -600,7 +611,6 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ >; }; @@ -691,6 +701,12 @@ >; }; + pinctrl_reg_can1: regcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -- cgit From b7fd68ac27200b917ce4494c591858194e584634 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 16 Sep 2022 08:31:07 -0700 Subject: ARM: dts: imx6qdl-gw54xx: add CAN regulator The GW54xx has a transceiver with a STBY pin connected to an IMX6 GPIO. Configure this as a regulator to drive it low when CAN is in use. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index cda48bf2f168..a9b04f9f1c2b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -137,6 +137,16 @@ regulator-always-on; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can1>; + regulator-name = "can1_stby"; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_h1_vbus: regulator@2 { compatible = "regulator-fixed"; reg = <2>; @@ -200,6 +210,7 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; status = "okay"; }; @@ -687,7 +698,6 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ >; }; @@ -786,6 +796,12 @@ >; }; + pinctrl_reg_can1: regcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -- cgit From 3175c70686c4162a5e087eba16595bae8c19b04d Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Fri, 8 Jul 2022 16:56:31 +0800 Subject: arm64: dts: imx8mp: add interconnects for media blk ctrl Add interconnect property for media blk ctrl Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index fe178b7d063c..a36d53914a24 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -1064,6 +1065,18 @@ "lcdif1", "isi", "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2"; + interconnects = + <&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>, + <&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>; + interconnect-names = "lcdif-rd", "lcdif-wr", "isi0", + "isi1", "isi2", "isp0", "isp1", + "dwe"; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, -- cgit From 31da63e1326c40cd141791ac069381998ae3e92d Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Fri, 8 Jul 2022 16:56:32 +0800 Subject: arm64: dts: imx8mp: add interconnect for hsio blk ctrl Add interconnect property for hsio blk ctrl Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a36d53914a24..0b165f98a82c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1108,6 +1108,11 @@ <&pgc_hsiomix>, <&pgc_pcie_phy>; power-domain-names = "bus", "usb", "usb-phy1", "usb-phy2", "pcie", "pcie-phy"; + interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>, + <&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>, + <&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>, + <&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>; + interconnect-names = "noc-pcie", "usb1", "usb2", "pcie"; #power-domain-cells = <1>; }; }; -- cgit From 683d7ffb7daaab1d48344cc17bdea17007dddd8c Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 27 Jul 2022 00:38:52 +1000 Subject: arm64: dts: imx8ulp: Add the fec support Add the fec support on i.MX8ULP platforms. Signed-off-by: Wei Fang Reviewed-by: Ahmad Fatoum Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 60c1b018bf03..3e8a1e4f0fc2 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -16,6 +16,7 @@ #size-cells = <2>; aliases { + ethernet0 = &fec; gpio0 = &gpiod; gpio1 = &gpioe; gpio2 = &gpiof; @@ -365,6 +366,16 @@ bus-width = <4>; status = "disabled"; }; + + fec: ethernet@29950000 { + compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x29950000 0x10000>; + interrupts = ; + interrupt-names = "int0"; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; + status = "disabled"; + }; }; gpioe: gpio@2d000080 { -- cgit From 1170826e1a3de7ae3e1f6b2016d54ea4787ef1d4 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 27 Jul 2022 00:38:53 +1000 Subject: arm64: dts: imx8ulp-evk: Add the fec support Enable the fec on i.MX8ULP EVK board. Signed-off-by: Wei Fang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 57 +++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts index 33e84c4e9ed8..f1c6d933a17c 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts @@ -19,6 +19,21 @@ device_type = "memory"; reg = <0x0 0x80000000 0 0x80000000>; }; + + clock_ext_rmii: clock-ext-rmii { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "ext_rmii_clk"; + #clock-cells = <0>; + }; + + clock_ext_ts: clock-ext-ts { + compatible = "fixed-clock"; + /* External ts clock is 50MHZ from PHY on EVK board. */ + clock-frequency = <50000000>; + clock-output-names = "ext_ts_clk"; + #clock-cells = <0>; + }; }; &lpuart5 { @@ -38,7 +53,49 @@ status = "okay"; }; +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_enet>; + pinctrl-1 = <&pinctrl_enet>; + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&pcc4 IMX8ULP_CLK_ENET>, + <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>, + <&clock_ext_rmii>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clock_ext_ts>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <1>; + }; + }; +}; + &iomuxc1 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX8ULP_PAD_PTE15__ENET0_MDC 0x43 + MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 + MX8ULP_PAD_PTE17__ENET0_RXER 0x43 + MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 + MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 + MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 + MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 + MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 + MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 + MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43 + MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43 + >; + }; + pinctrl_lpuart5: lpuart5grp { fsl,pins = < MX8ULP_PAD_PTF14__LPUART5_TX 0x3 -- cgit From 7e431a93e86cc16f1723f2d5b342a4b127e46d9d Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:42 +0200 Subject: arm64: dts: imx8mm-venice-gw72xx-0x: blank line at end of file Avoid the following checkpatch warning: Found possible blank line(s) at end of file 'arch/arm/boot/dts/imx8mm-venice-gw72xx-0x.dts' Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts index b1e7540f0281..641be3af989d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts @@ -17,4 +17,3 @@ stdout-path = &uart2; }; }; - -- cgit From 6fd44214f5f975e210b2911625b8dd1c1d7bcde5 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:43 +0200 Subject: arm64: dts: imx8mp-verdin: don't use multiple blank lines Avoid the following checkpatch warning: arch/arm/boot/dts/imx8mp-verdin.dtsi:281: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler Reviewed-by: Laurent Pinchart Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index c5987bdbb383..f062fdbb2719 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -286,7 +286,6 @@ status = "disabled"; }; - /* Verdin CAN_2 */ &flexcan2 { pinctrl-names = "default"; -- cgit From 7e819a2d921ea2e6513bdb1e8fff3e98abf44681 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Jul 2022 23:54:44 +0200 Subject: arm64: dts: mnt-reform2: don't use multiple blank lines Avoid the following checkpatch warning: arch/arm/boot/dts/imx8mq-mnt-reform2.dts:213: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler Acked-by: Lucas Stach Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 8956a46788fa..055031bba8c4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -210,7 +210,6 @@ status = "okay"; }; - ®_1p8v { vin-supply = <®_main_5v>; }; -- cgit From ceefe3d5f11f24d4a34369739d82c79c626abdc4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 24 Jul 2022 22:46:36 +0200 Subject: arm64: dts: imx8mp: Add HW variant details to i.MX8M Plus DHCOM PDK2 Add information about which exact SoM variant is used on which PDK2 variant. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: Peng Fan Cc: Shawn Guo To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 2ca2ede2e94e..04c552ad8a60 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -1,6 +1,11 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2022 Marek Vasut + * + * DHCOM iMX8MP variant: + * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2 + * DHCOM PCB number: 660-100 or newer + * PDK2 PCB number: 516-400 or newer */ /dts-v1/; -- cgit From 6007e21018f6d4fbd55743e19615505b4a65247f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 24 Jul 2022 22:47:01 +0200 Subject: arm64: dts: imx8mp: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2 This PHY is not used on PDK2, the header was added due to copy-paste error, drop it. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: Peng Fan Cc: Shawn Guo To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 04c552ad8a60..c641b850c577 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -11,7 +11,6 @@ /dts-v1/; #include -#include #include #include "imx8mp-dhcom-som.dtsi" -- cgit From dcc80ddbc3a602731464c1baa8f22403ec62e915 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 24 Jul 2022 22:47:41 +0200 Subject: arm64: dts: imx8mp: Add SoM compatible to i.MX8M Plus DHCOM PDK2 Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: Peng Fan Cc: Shawn Guo To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index c641b850c577..382fbedaf6ba 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -16,7 +16,8 @@ / { model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)"; - compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp"; + compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som", + "fsl,imx8mp"; chosen { stdout-path = &uart1; -- cgit From 37bbb8b2f919ed4ea9e0f2529950aa4b8b31d5e0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 4 Aug 2022 14:59:43 -0300 Subject: arm64: dts: imx8mm/n-venice-gw7902: Remove invalid property The 'oscillator-frequency' property is not documented and it is not used anywhere. Remove it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 1 - arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 6dc5eda2d256..31f4c735fe4f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -222,7 +222,6 @@ compatible = "microchip,mcp2515"; reg = <0>; clocks = <&can20m>; - oscillator-frequency = <20000000>; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 636f8602b979..dd4302ac1de4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -213,7 +213,6 @@ compatible = "microchip,mcp2515"; reg = <0>; clocks = <&can20m>; - oscillator-frequency = <20000000>; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>; -- cgit From 8130fa71089a1a30a0686e84b0c0fa1af10723c4 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 12 Aug 2022 10:23:34 -0700 Subject: arm64: dts: imx8mm-venice-gw7903: add digital I/O ctl gpios The GW7903-C revision introduced two additional GPIO's for controlling the digital I/O direction. Add them. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index a65761a53f23..19f6d2943d26 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -250,7 +250,7 @@ }; &gpio2 { - gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "", + gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "", "dig1_out#", "dig1_in", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; @@ -630,6 +630,8 @@ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x40000041 /* DIG1_IN */ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40000041 /* DIG1_CTL */ + MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x40000041 /* DIG2_CTL */ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000041 /* DIG2_IN */ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000041 /* DIG2_OUT */ MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x40000041 /* SIM1DET# */ -- cgit From 310dde60ddde8ff0e7ef7b164025dc9b9a4a1445 Mon Sep 17 00:00:00 2001 From: Max Krummenacher Date: Mon, 22 Aug 2022 09:53:42 +0200 Subject: arm64: dts: imx8mp-verdin: add cpu-supply Add the cpu-supply property to all CPU nodes to enable the cpufreq driver. Signed-off-by: Max Krummenacher Reviewed-by: Laurent Pinchart Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index f062fdbb2719..dbc22b672fb3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -146,6 +146,22 @@ }; }; +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + &cpu_alert0 { temperature = <95000>; }; @@ -453,7 +469,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_vdd_arm: BUCK2 { nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; regulator-always-on; -- cgit From df680992dd62d809e0e8397e8e3c41a609b58eb1 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 22 Aug 2022 14:45:35 +0800 Subject: arm64: dts: imx8mp: add vpu pgc nodes Add i.MX8MP PGC nodes for vpu, which are used to supply power for VPU. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 0b165f98a82c..34af983b0210 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -598,6 +598,33 @@ reg = ; clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>; }; + + pgc_vpumix: power-domain@19 { + #power-domain-cells = <0>; + reg = ; + clocks =<&clk IMX8MP_CLK_VPU_ROOT>; + }; + + pgc_vpu_g1: power-domain@20 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = ; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + }; + + pgc_vpu_g2: power-domain@21 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = ; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + }; + + pgc_vpu_vc8000e: power-domain@22 { + #power-domain-cells = <0>; + power-domains = <&pgc_vpumix>; + reg = ; + clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; + }; }; }; }; -- cgit From a763d0cf290a117a133b7cace5da7afebc009b9b Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 22 Aug 2022 14:45:36 +0800 Subject: arm64: dts: imx8mp: add VPU blk ctrl node Add i.MX8MP VPU blk ctrl node Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 34af983b0210..a153bdc7a01e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1175,6 +1175,23 @@ power-domains = <&pgc_gpu2d>; }; + vpumix_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + #power-domain-cells = <1>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_vc8000e>; + power-domain-names = "bus", "g1", "g2", "vc8000e"; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>, + <&clk IMX8MP_CLK_VPU_G2_ROOT>, + <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; + clock-names = "g1", "g2", "vc8000e"; + interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, + <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, + <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; + interconnect-names = "g1", "g2", "vc8000e"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, -- cgit From 587c1fed72b314003c9f0346a6466158fa20563f Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Aug 2022 10:03:49 +0200 Subject: arm64: dts: imx8mm-kontron: Adjust compatibles, file names and model strings The official naming includes "SL" (SoM-Line) or "BL" (Board-Line). By updating we make sure, that we can maintain this more easily in future and make sure that the proper devicetree can be selected for the hardware. Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 2 +- .../arm64/boot/dts/freescale/imx8mm-kontron-bl.dts | 350 +++++++++++++++++++++ .../boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 350 --------------------- .../dts/freescale/imx8mm-kontron-n801x-som.dtsi | 299 ------------------ .../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 299 ++++++++++++++++++ 5 files changed, 650 insertions(+), 650 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts delete mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts delete mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 8bf7f7ecebaa..d014f7c4c888 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -55,7 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts new file mode 100644 index 000000000000..ca533baedcd2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-sl.dtsi" + +/ { + model = "Kontron BL i.MX8MM (N801X S)"; + compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii-rxid"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts deleted file mode 100644 index 23be1ec538ba..000000000000 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ /dev/null @@ -1,350 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx8mm-kontron-n801x-som.dtsi" - -/ { - model = "Kontron i.MX8MM N801X S"; - compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; - - aliases { - ethernet1 = &usbnet; - }; - - /* fixed crystal dedicated to mcp2515 */ - osc_can: clock-osc-can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "osc-can"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_led>; - - led1 { - label = "led1"; - gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - - led2 { - label = "led2"; - gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; - }; - - led3 { - label = "led3"; - gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; - }; - - led4 { - label = "led4"; - gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; - }; - - led5 { - label = "led5"; - gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - }; - - led6 { - label = "led6"; - gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; - }; - }; - - pwm-beeper { - compatible = "pwm-beeper"; - pwms = <&pwm2 0 5000 0>; - }; - - reg_rst_eth2: regulator-rst-eth2 { - compatible = "regulator-fixed"; - regulator-name = "rst-usb-eth2"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_vdd_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd-5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&ecspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - status = "okay"; - - can0: can@0 { - compatible = "microchip,mcp2515"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can>; - clocks = <&osc_can>; - interrupt-parent = <&gpio4>; - interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - spi-max-frequency = <10000000>; - vdd-supply = <®_vdd_3v3>; - xceiver-supply = <®_vdd_5v>; - }; -}; - -&ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii-rxid"; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - reg = <0>; - reset-assert-us = <1>; - reset-deassert-us = <15000>; - reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; -}; - -&pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - linux,rs485-enabled-at-boot-time; - uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - over-current-active-low; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - usb1@1 { - compatible = "usb424,9514"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - usbnet: ethernet@1 { - compatible = "usb424,ec00"; - reg = <1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - }; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - vmmc-supply = <®_vdd_3v3>; - vqmmc-supply = <®_nvcc_sd>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - pinctrl_can: cangrp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 - MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 - MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 - MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 - MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ - MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ - >; - }; - - pinctrl_gpio_led: gpioledgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 - MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 - MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 - MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 - MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 - MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 - MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 - MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 - MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 - MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 - MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 - >; - }; - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 - >; - }; - - pinctrl_usb_eth2: usbeth2grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - >; - }; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi deleted file mode 100644 index 8f90eb02550d..000000000000 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright (C) 2019 Kontron Electronics GmbH - */ - -#include "imx8mm.dtsi" - -/ { - model = "Kontron i.MX8MM N801X SoM"; - compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; - - memory@40000000 { - device_type = "memory"; - /* - * There are multiple SoM flavors with different DDR sizes. - * The smallest is 1GB. For larger sizes the bootloader will - * update the reg property. - */ - reg = <0x0 0x40000000 0 0x80000000>; - }; - - chosen { - stdout-path = &uart3; - }; -}; - -&A53_0 { - cpu-supply = <®_vdd_arm>; -}; - -&A53_1 { - cpu-supply = <®_vdd_arm>; -}; - -&A53_2 { - cpu-supply = <®_vdd_arm>; -}; - -&A53_3 { - cpu-supply = <®_vdd_arm>; -}; - -&ddrc { - operating-points-v2 = <&ddrc_opp_table>; - - ddrc_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-25M { - opp-hz = /bits/ 64 <25000000>; - }; - - opp-100M { - opp-hz = /bits/ 64 <100000000>; - }; - - opp-750M { - opp-hz = /bits/ 64 <750000000>; - }; - }; -}; - -&ecspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - status = "okay"; - - flash@0 { - compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; - spi-max-frequency = <80000000>; - reg = <0>; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pca9450: pmic@25 { - compatible = "nxp,pca9450a"; - reg = <0x25>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - - regulators { - reg_vdd_soc: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - nxp,dvs-run-voltage = <850000>; - nxp,dvs-standby-voltage = <800000>; - }; - - reg_vdd_arm: BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <950000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - nxp,dvs-run-voltage = <950000>; - nxp,dvs-standby-voltage = <850000>; - }; - - reg_vdd_dram: BUCK3 { - regulator-name = "buck3"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <950000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_3v3: BUCK4 { - regulator-name = "buck4"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_1v8: BUCK5 { - regulator-name = "buck5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_nvcc_dram: BUCK6 { - regulator-name = "buck6"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_nvcc_snvs: LDO1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_snvs: LDO2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdda: LDO3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_vdd_phy: LDO4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_nvcc_sd: LDO5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; -}; - -&uart3 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - vmmc-supply = <®_vdd_3v3>; - vqmmc-supply = <®_vdd_1v8>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 - MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 - MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 - MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 - MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 - MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 - MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 - MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 - MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 - MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 - MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 - MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi new file mode 100644 index 000000000000..30299c2a98ea --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "Kontron SL i.MX8MM (N801X SOM)"; + compatible = "kontron,imx8mm-sl", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; -- cgit From eef2c0217e02b6c7ed5b10b82ea944127145e113 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Aug 2022 10:03:50 +0200 Subject: arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage It turns out that it is not necessary to declare the VSELECT signal as GPIO and let the PMIC driver set it to a fixed high level. This switches the voltage between 3.3V and 1.8V by setting the PMIC register for LDO5 accordingly. Instead we can do it like other boards already do and simply mux the VSELECT signal of the USDHC interface to the pin. This makes sure that the correct voltage is selected by setting the PMIC's SD_VSEL input to high or low accordingly. Reported-by: Heiko Thiery Signed-off-by: Frieder Schrempf Reviewed-by: Heiko Thiery Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts | 3 +++ arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts index ca533baedcd2..a079322a3793 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts @@ -321,6 +321,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; @@ -333,6 +334,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; @@ -345,6 +347,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index 30299c2a98ea..33179157f619 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -86,7 +86,6 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; regulators { reg_vdd_soc: BUCK1 { @@ -229,7 +228,6 @@ pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 >; }; -- cgit From 3e44946da2273d84107823838f6a40588dc2b2a7 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Aug 2022 10:03:51 +0200 Subject: arm64: dts: imx8mm-kontron: Remove low DDRC operating point For some reason there is a problem with finding a DDR configuration that works on all operating points and all LPDDR4 types used on the SoM. Therefore the bootloader currently doesn't configure the lowest of the three operating points. Let's also skip this in the kernel devicetree to make sure it isn't used. Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index 33179157f619..96ecdce67059 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -46,10 +46,6 @@ ddrc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-25M { - opp-hz = /bits/ 64 <25000000>; - }; - opp-100M { opp-hz = /bits/ 64 <100000000>; }; -- cgit From 9cb41873f8e1e91422ec591910124ea6094ede3f Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Aug 2022 10:03:52 +0200 Subject: arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names Improve the naming of the regulators to contain the voltage rail names from the schematic. Suggested-by: Heiko Thiery Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index 96ecdce67059..ce9c27619e26 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -85,7 +85,7 @@ regulators { reg_vdd_soc: BUCK1 { - regulator-name = "buck1"; + regulator-name = "+0V8_VDD_SOC (BUCK1)"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <850000>; regulator-boot-on; @@ -96,7 +96,7 @@ }; reg_vdd_arm: BUCK2 { - regulator-name = "buck2"; + regulator-name = "+0V9_VDD_ARM (BUCK2)"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <950000>; regulator-boot-on; @@ -107,7 +107,7 @@ }; reg_vdd_dram: BUCK3 { - regulator-name = "buck3"; + regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <950000>; regulator-boot-on; @@ -115,7 +115,7 @@ }; reg_vdd_3v3: BUCK4 { - regulator-name = "buck4"; + regulator-name = "+3V3 (BUCK4)"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -123,7 +123,7 @@ }; reg_vdd_1v8: BUCK5 { - regulator-name = "buck5"; + regulator-name = "+1V8 (BUCK5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -131,7 +131,7 @@ }; reg_nvcc_dram: BUCK6 { - regulator-name = "buck6"; + regulator-name = "+1V1_NVCC_DRAM (BUCK6)"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-boot-on; @@ -139,7 +139,7 @@ }; reg_nvcc_snvs: LDO1 { - regulator-name = "ldo1"; + regulator-name = "+1V8_NVCC_SNVS (LDO1)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -147,7 +147,7 @@ }; reg_vdd_snvs: LDO2 { - regulator-name = "ldo2"; + regulator-name = "+0V8_VDD_SNVS (LDO2)"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -155,7 +155,7 @@ }; reg_vdda: LDO3 { - regulator-name = "ldo3"; + regulator-name = "+1V8_VDDA (LDO3)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -163,7 +163,7 @@ }; reg_vdd_phy: LDO4 { - regulator-name = "ldo4"; + regulator-name = "+0V9_VDD_PHY (LDO4)"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -171,7 +171,7 @@ }; reg_nvcc_sd: LDO5 { - regulator-name = "ldo5"; + regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; -- cgit From b63791966edff822297f6690c67dbba3f032be73 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Aug 2022 10:03:53 +0200 Subject: arm64: dts: imx8mm-kontron: Add SPI NOR partition layout This is the layout used by the bootloader. Add it to the kernel devicetree to make the same layout available in Linux and have the devicetrees synced. Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- .../arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index ce9c27619e26..0679728d2489 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi @@ -66,6 +66,27 @@ compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; spi-max-frequency = <80000000>; reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x1e0000>; + }; + + partition@1e0000 { + label = "env"; + reg = <0x1e0000 0x10000>; + }; + + partition@1f0000 { + label = "env_redundant"; + reg = <0x1f0000 0x10000>; + }; + }; }; }; -- cgit From de9618e84f763a0236679d2eb5c9a6207ec2eb92 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Aug 2022 10:03:54 +0200 Subject: arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S This adds support for the Kontron Electronics SL i.MX8MM OSM-S SoM and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts | 376 +++++++++++++++++++++ .../boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 330 ++++++++++++++++++ 3 files changed, 707 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index d014f7c4c888..542e1d661f30 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts new file mode 100644 index 000000000000..8b16bd68576c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-osm-s.dtsi" + +/ { + model = "Kontron BL i.MX8MM OSM-S (N802X S)"; + compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2542fd */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-name = "rst-usb-eth2"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_vbus>; + gpio = <&gpio3 25 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "usb1-vbus"; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vdd-5v"; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp251xfd"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>; + /* + * Limit the SPI clock to 15 MHz to prevent issues + * with corrupted data due to chip errata. + */ + spi-max-frequency = <15000000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + eeram@0 { + compatible = "microchip,48l640"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii-rxid"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out", + "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>; + gpio-line-names = "", "", "dio4-in", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + disable-over-current; + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 /* PHY RST */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x19 + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + >; + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_reg_usb1_vbus: regusb1vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi new file mode 100644 index 000000000000..8d10f5b41297 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +#include +#include "imx8mm.dtsi" + +/ { + model = "Kontron OSM-S i.MX8MM (N802X SOM)"; + compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x1e0000>; + }; + + partition@1e0000 { + label = "env"; + reg = <0x1e0000 0x10000>; + }; + + partition@1f0000 { + label = "env_redundant"; + reg = <0x1f0000 0x10000>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "+0V8_VDD_SOC (BUCK1)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "+0V9_VDD_ARM (BUCK2)"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "+3V3 (BUCK4)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "+1V8 (BUCK5)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "+1V1_NVCC_DRAM (BUCK6)"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "+1V8_NVCC_SNVS (LDO1)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "+0V8_VDD_SNVS (LDO2)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "+1V8_VDDA (LDO3)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "+0V9_VDD_PHY (LDO4)"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "NVCC_SD (LDO5)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>; + trickle-diode-disable; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; -- cgit From b57f7d214189a2a6c0ff8a8883d5d178796b69fd Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 23 Aug 2022 11:02:13 +0800 Subject: arm64: dts: imx8-ss-dma: add IPG clock for i2c i.MX8 LPI2C requires both PER and IPG clock, so add the missed IPG clk. Reviewed-by: Dong Aisheng Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index 960a802b8b6e..d7b4229bb4a2 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -111,8 +111,9 @@ dma_subsys: bus@5a000000 { i2c0: i2c@5a800000 { reg = <0x5a800000 0x4000>; interrupts = ; - clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, + <&i2c0_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_0>; @@ -122,8 +123,9 @@ dma_subsys: bus@5a000000 { i2c1: i2c@5a810000 { reg = <0x5a810000 0x4000>; interrupts = ; - clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, + <&i2c1_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_1>; @@ -133,8 +135,9 @@ dma_subsys: bus@5a000000 { i2c2: i2c@5a820000 { reg = <0x5a820000 0x4000>; interrupts = ; - clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, + <&i2c2_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_2>; @@ -144,8 +147,9 @@ dma_subsys: bus@5a000000 { i2c3: i2c@5a830000 { reg = <0x5a830000 0x4000>; interrupts = ; - clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>; - clock-names = "per"; + clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, + <&i2c3_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_I2C_3>; -- cgit From 4d50d2bf0e418f9000e242d4df6cc292509a568e Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 23 Aug 2022 18:23:25 +0530 Subject: arm64: dts: imx8mm: Fix typo in license text for Engicam boards Fix the Amarula Solutions typo mistake in license text for Engicam i.MX8M boards add in below commits. commit <60ac35268f85b> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM") commit ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit") commit ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus SoM") Signed-off-by: Jagan Teki Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi index 9e6170d9394e..def7bb5d37cf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts index dd703b6a5e17..a02b31c42db4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts @@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi index 5116079cce22..a6319824ea2e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi @@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / { -- cgit From f703b6026d0a7c3d8a23ad5e219048f7a59bffea Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 23 Aug 2022 15:01:22 +0100 Subject: arm64: dts: imx8mp-msc-sm2s: Add device trees for MSC SM2S-IMX8PLUS SoM and carrier board Add device trees for one of a number of MSC's (parent company, Avnet) variants of the SM2S-IMX8PLUS system on module along with the compatible SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of SoMs use the NXP i.MX8MP SoC and provide the SMARC module interface. Signed-off-by: Martyn Welch Reviewed-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi | 68 ++ .../boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts | 52 ++ arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi | 820 +++++++++++++++++++++ 4 files changed, 941 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 542e1d661f30..c0319d288531 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi new file mode 100644 index 000000000000..2f5cc013e8d6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Avnet Embedded GmbH + */ +/dts-v1/; + +#include "imx8mp-msc-sm2s.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */ + }; +}; + +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + +&soc_alert0 { + temperature = <95000>; +}; + +&soc_crit0 { + temperature = <105000>; +}; + +&tca6424 { + gbe0-int-hog { + gpio-hog; + input; + gpios = <3 GPIO_ACTIVE_LOW>; + }; + + gbe1-int-hog { + gpio-hog; + input; + gpios = <4 GPIO_ACTIVE_LOW>; + }; + + cam2-rst-hog { + gpio-hog; + output-high; + gpios = <9 GPIO_ACTIVE_LOW>; + }; + + cam2-pwr-hog { + gpio-hog; + output-high; + gpios = <10 GPIO_ACTIVE_LOW>; + }; + + tpm-int-hog { + gpio-hog; + input; + gpios = <13 GPIO_ACTIVE_LOW>; + }; + + wifi-int-hog { + gpio-hog; + input; + gpios = <14 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts new file mode 100644 index 000000000000..470ff8e31e32 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Avnet Embedded GmbH + */ + +/dts-v1/; + +#include "imx8mp-msc-sm2s-14N0600E.dtsi" +#include +#include + +/ { + model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM"; + compatible = "avnet,sm2s-imx8mp-14N0600E-ep1", + "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp", + "fsl,imx8mp"; +}; + +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +&usdhc2 { + no-1-8-v; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_smarc_gpio>; + + pinctrl_smarc_gpio: smarcgpiosgrp { + fsl,pins = + , /* GPIO0 */ + , /* GPIO1 */ + , /* GPIO2 */ + , /* GPIO3 */ + , /* GPIO4 */ + , /* GPIO5 */ + , /* GPIO6 */ + , /* GPIO7 */ + , /* GPIO8 */ + , /* GPIO9 */ + , /* GPIO10 */ + , /* GPIO11 */ + , /* GPIO12 */ + ; /* GPIO13 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi new file mode 100644 index 000000000000..5dbec71747c3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi @@ -0,0 +1,820 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Avnet Embedded GmbH + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include + +/ { + aliases { + rtc0 = &sys_rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart2; + }; + + reg_usb0_host_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_host_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_vbus>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb1_host_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_host_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + reg_flexcan1_xceiver: regulator-flexcan1 { + compatible = "regulator-fixed"; + regulator-name = "flexcan1-xceiver"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_flexcan2_xceiver: regulator-flexcan2 { + compatible = "regulator-fixed"; + regulator-name = "flexcan2-xceiver"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lcd0_backlight: backlight-0 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_backlight>; + pwms = <&pwm1 0 100000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + lcd1_backlight: backlight-1 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_backlight>; + pwms = <&pwm2 0 100000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + status = "okay"; + + led-sw { + label = "sw-led"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + extcon_usb0: extcon-usb0 { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_extcon>; + id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&A53_0 { + cpu-supply = <&vcc_arm>; +}; + +&A53_1 { + cpu-supply = <&vcc_arm>; +}; + +&A53_2 { + cpu-supply = <&vcc_arm>; +}; + +&A53_3 { + cpu-supply = <&vcc_arm>; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,clk-output-sel = ; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,clk-output-sel = ; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + id_eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5>; + clock-frequency = <400000>; + status = "disabled"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6>; + clock-frequency = <400000>; + status = "okay"; + + tca6424: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tca6424>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#", + "gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int", + "PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#", + "wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#", + "gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#", + "CHARGER_PRSNT#"; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + dsi_lvds_bridge: bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_bridge>; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + pmic: pmic@30 { + compatible = "ricoh,rn5t567"; + reg = <0x30>; + interrupt-parent = <&tca6424>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + regulators { + DCDC1 { + regulator-name = "VCC_SOC"; + regulator-always-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + }; + + DCDC2 { + regulator-name = "VCC_DRAM"; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vcc_arm: DCDC3 { + regulator-name = "VCC_ARM"; + regulator-always-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + }; + + DCDC4 { + regulator-name = "VCC_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "VCC_LDO1_2V5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + LDO2 { + regulator-name = "VCC_LDO2_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO3 { + regulator-name = "VCC_ETH_2V5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + LDO4 { + regulator-name = "VCC_DDR4_2V5"; + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + LDO5 { + regulator-name = "VCC_LDO5_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDORTC1 { + regulator-name = "VCC_SNVS_1V8"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDORTC2 { + regulator-name = "VCC_SNVS_3V3"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + sys_rtc: rtc@32 { + compatible = "ricoh,r2221tl"; + reg = <0x32>; + interrupt-parent = <&tca6424>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + + tmp_sensor: temperature-sensor@71 { + compatible = "ti,tmp103"; + reg = <0x71>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_flexcan1_xceiver>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_flexcan2_xceiver>; + status = "disabled"; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + qspi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "disabled"; +}; + +&usb3_phy0 { + vbus-supply = <®_usb0_host_vbus>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_usb1_host_vbus>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + extcon = <&extcon_usb0>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = + , + , + , + , + ; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = + , + , + , + , + ; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_fec: fecgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = + , + ; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = + , + ; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = + , + ; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = + , + ; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = + , + ; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = + , + ; + }; + + pinctrl_i2c5: i2c5grp { + fsl,pins = + , + ; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = + , + ; + }; + + pinctrl_lcd0_backlight: lcd0-backlightgrp { + fsl,pins = + ; + }; + + pinctrl_lcd1_backlight: lcd1-backlightgrp { + fsl,pins = + ; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = + ; + }; + + pinctrl_lvds_bridge: lvds-bridgegrp { + fsl,pins = + ; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = + ; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = + ; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = + ; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = + ; + }; + + pinctrl_tca6424: tca6424grp { + fsl,pins = + ; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + , + ; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + , + , + , + ; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + , + , + , + ; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = + , + ; + }; + + pinctrl_usb0_extcon: usb0-extcongrp { + fsl,pins = + ; + }; + + pinctrl_usb0_vbus: usb0-vbusgrp { + fsl,pins = + ; + }; + + pinctrl_usb1_vbus: usb1-vbusgrp { + fsl,pins = + ; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = + , + ; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp { + fsl,pins = + ; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = + ; + }; +}; -- cgit From 4dcb6c0fef5daf0127652ededde7391a4b07e58f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 23 Aug 2022 18:56:02 +0200 Subject: arm64: dts: imx8mp: Add SNVS LPGPR Add SNVS LPGPR bindings to MX8M Plus, the LPGPR is used to store e.g. boot counter. Signed-off-by: Marek Vasut Reviewed-by: Fabio Estevam Reviewed-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a153bdc7a01e..f676dbde16be 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -470,6 +470,11 @@ wakeup-source; status = "disabled"; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx8mp-snvs-lpgpr", + "fsl,imx7d-snvs-lpgpr"; + }; }; clk: clock-controller@30380000 { -- cgit From 7db9905d48e1b9a97a28224c5a201262ebce7489 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 26 Aug 2022 21:22:50 +0200 Subject: arm64: dts: imx8ulp: no executable source file permission This fixes the following error: arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h: error: do not set execute permissions for source files Signed-off-by: Marcel Ziswiler Acked-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h old mode 100755 new mode 100644 -- cgit From 9e65987b9584de3e3d15ec0c6b0267107c603e6b Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Fri, 2 Sep 2022 16:58:01 +0800 Subject: arm64: dts: imx8mp: Add iMX8MP PCIe support Add i.MX8MP PCIe support. Signed-off-by: Richard Zhu Tested-by: Marek Vasut Tested-by: Richard Leitner Tested-by: Alexander Stein Reviewed-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 43 +++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index f676dbde16be..53493dc7d976 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -5,6 +5,7 @@ #include #include +#include #include #include #include @@ -1129,6 +1130,17 @@ #power-domain-cells = <1>; }; + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mp-pcie-phy"; + reg = <0x32f00000 0x10000>; + resets = <&src IMX8MP_RESET_PCIEPHY>, + <&src IMX8MP_RESET_PCIEPHY_PERST>; + reset-names = "pciephy", "perst"; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + hsio_blk_ctrl: blk-ctrl@32f10000 { compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; reg = <0x32f10000 0x24>; @@ -1149,6 +1161,37 @@ }; }; + pcie: pcie@33800000 { + compatible = "fsl,imx8mp-pcie"; + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <3>; + linux,pci-domain = <0>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + }; + gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; -- cgit From d5065050006461f1e859aec7853bd62ac8739af5 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Fri, 2 Sep 2022 16:58:02 +0800 Subject: arm64: dts: imx8mp-evk: Add PCIe support Add PCIe support on i.MX8MP EVK board. Signed-off-by: Richard Zhu Tested-by: Marek Vasut Tested-by: Richard Leitner Tested-by: Alexander Stein Reviewed-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 53 ++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index f6b017ab5f53..9f1469db554d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include #include "imx8mp.dtsi" / { @@ -33,6 +34,12 @@ <0x1 0x00000000 0 0xc0000000>; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; regulator-name = "can1-stby"; @@ -55,6 +62,17 @@ enable-active-high; }; + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -350,6 +368,28 @@ */ }; +&pcie_phy { + fsl,refclk-pad-mode = ; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -502,6 +542,19 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */ + MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41 + >; + }; + + pinctrl_pcie0_reg: pcie0reggrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 -- cgit From b340ee0263f44fd598d112ca644a0e2e8f16631b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 31 Aug 2022 19:01:22 +0300 Subject: arm64: dts: ls1028a: move DSA CPU port property to the common SoC dtsi Since the CPU port 4 of the switch is hardwired inside the SoC to go to the enetc port 2, this shouldn't be something that the board files need to set (but whether that CPU port is used or not is another discussion). So move the DSA "ethernet" property to the common dtsi. Signed-off-by: Vladimir Oltean Acked-by: Michael Walle Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts | 1 - arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 1 - arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 1 - arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 + 4 files changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 6b575efd84a7..52ef2e8e5492 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -104,7 +104,6 @@ }; &mscc_felix_port4 { - ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index 330e34f933a3..37c20cb6c152 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -60,6 +60,5 @@ }; &mscc_felix_port4 { - ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index e0cd1516d05b..7285bdcf2302 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -278,7 +278,6 @@ }; &mscc_felix_port4 { - ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 5627dd7734f3..1215fcdf70fa 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1156,6 +1156,7 @@ mscc_felix_port4: port@4 { reg = <4>; phy-mode = "internal"; + ethernet = <&enetc_port2>; status = "disabled"; fixed-link { -- cgit From d72e3b4e76db2a4f2f8d16d953e1cc715d82346a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 31 Aug 2022 19:01:23 +0300 Subject: arm64: dts: ls1028a: mark enetc port 3 as a DSA master too The LS1028A switch has 2 internal links to the ENETC controller. With DSA's ability to support multiple CPU ports, we should mark both ENETC ports as DSA masters. Signed-off-by: Vladimir Oltean Reviewed-by: Michael Walle Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 1215fcdf70fa..ac1c3a7e5f7a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1169,6 +1169,7 @@ mscc_felix_port5: port@5 { reg = <5>; phy-mode = "internal"; + ethernet = <&enetc_port3>; status = "disabled"; fixed-link { -- cgit From 68ad0821fc7c95983e46d6c9fa5ff1ff689c9b6c Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 31 Aug 2022 19:01:24 +0300 Subject: arm64: dts: ls1028a: enable swp5 and eno3 for all boards In order for the LS1028A based boards to benefit from support for multiple CPU ports, the second DSA master and its associated CPU port must be enabled in the device trees. This does not change the default CPU port from the current port 4. Signed-off-by: Vladimir Oltean Acked-by: Michael Walle Signed-off-by: Shawn Guo --- .../boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts | 8 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 8 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 8 ++++++++ 3 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index 52ef2e8e5492..73eb6061c73e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -59,6 +59,10 @@ status = "okay"; }; +&enetc_port3 { + status = "okay"; +}; + &i2c3 { eeprom@57 { compatible = "atmel,24c32"; @@ -107,6 +111,10 @@ status = "okay"; }; +&mscc_felix_port5 { + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index 37c20cb6c152..113b1df74bf8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -39,6 +39,10 @@ status = "okay"; }; +&enetc_port3 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -62,3 +66,7 @@ &mscc_felix_port4 { status = "okay"; }; + +&mscc_felix_port5 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 7285bdcf2302..e33725c60169 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -151,6 +151,10 @@ status = "okay"; }; +&enetc_port3 { + status = "okay"; +}; + &esdhc { sd-uhs-sdr104; sd-uhs-sdr50; @@ -281,6 +285,10 @@ status = "okay"; }; +&mscc_felix_port5 { + status = "okay"; +}; + &optee { status = "okay"; }; -- cgit From f00df2bdb5122265fc535ac05fa0add3f5fa18b8 Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Fri, 2 Sep 2022 10:42:11 +0200 Subject: arm64: dts: imx8mq-librem5: describe the voice coil motor for focus control Describe the focus motor that will be used for the rear camera - even though the rear camera sensor driver is not yet in the mainline. The focus motor is a separate device and can be controlled already. Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 9eec8a7eecfc..0626e4194d95 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1070,6 +1070,12 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; + vcm@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <®_csi_1v8>; + }; + bat: fuel-gauge@36 { compatible = "maxim,max17055"; reg = <0x36>; -- cgit From c504745d821e1e74157a5e942888ad9b14248042 Mon Sep 17 00:00:00 2001 From: Guido Günther Date: Fri, 2 Sep 2022 10:42:12 +0200 Subject: arm64: dts: imx8mq-librem5: add RGB pwm notification leds MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Describe the RGB notification leds on the Librem 5 phone. Use the common defines so we're sure to adhere to the common patterns, use predefined led colors and functions so we're being warned in case of deprecations. Signed-off-by: Guido Günther Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 0626e4194d95..8da7b87c1aa1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -7,6 +7,7 @@ #include "dt-bindings/input/input.h" #include +#include #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/usb/pd.h" #include "imx8mq.dtsi" @@ -54,6 +55,31 @@ }; }; + led-controller { + compatible = "pwm-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + max-brightness = <248>; + pwms = <&pwm2 0 50000 0>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + max-brightness = <248>; + pwms = <&pwm4 0 50000 0>; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = ; + max-brightness = <248>; + pwms = <&pwm3 0 50000 0>; + }; + }; + reg_aud_1v8: regulator-audio-1v8 { compatible = "regulator-fixed"; pinctrl-names = "default"; -- cgit From 6effe295e1a87408033c29dbcea9d5a5c8b937d5 Mon Sep 17 00:00:00 2001 From: Sebastian Krzyszkowiak Date: Fri, 2 Sep 2022 10:42:13 +0200 Subject: arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply This allows the userspace to notice that there's not enough current provided to charge the battery, and also fixes issues with 0% SOC values being considered invalid. Signed-off-by: Sebastian Krzyszkowiak Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 8da7b87c1aa1..7e6c4ad43809 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1109,6 +1109,7 @@ interrupts = <20 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gauge>; + power-supplies = <&bq25895>; maxim,over-heat-temp = <700>; maxim,over-volt = <4500>; maxim,rsns-microohm = <5000>; -- cgit From 6ba73ecff00a5d49e7eaf3dcf659cadfe05c81ff Mon Sep 17 00:00:00 2001 From: Angus Ainslie Date: Fri, 2 Sep 2022 10:42:14 +0200 Subject: arm64: dts: imx8mq-librem5: add USB type-c properties for role switching Add the connector properties to the USB type-c stanza to enable (PD) role-switching on the Librem 5 phone. Signed-off-by: Angus Ainslie Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 7e6c4ad43809..f07d1c6e9777 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -773,6 +773,10 @@ interrupt-names = "irq"; connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + ports { #address-cells = <1>; #size-cells = <0>; -- cgit From 2d43092e324357f41ed1988b246909fc76b4fe0e Mon Sep 17 00:00:00 2001 From: Angus Ainslie Date: Fri, 2 Sep 2022 10:42:15 +0200 Subject: arm64: dts: imx8mq-librem5: add usb-role-switch property to dwc3 In order to enable (PD and data) role switching on the Librem 5 phone, add the usb-role-switch property to imx8mq's dwc3 node. Signed-off-by: Angus Ainslie Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index f07d1c6e9777..058d6ecf109b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1302,6 +1302,7 @@ #size-cells = <0>; dr_mode = "otg"; snps,dis_u3_susphy_quirk; + usb-role-switch; status = "okay"; port@0 { -- cgit From 79d38f6b08eea95212b909b2dc12c8b4cb936202 Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Fri, 2 Sep 2022 10:42:16 +0200 Subject: arm64: dts: imx8mq-librem5: fix mipi_csi description Properties are not documented so lead to the following error: '#address-cells', '#size-cells', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' Fix this by removing unneeded properties. Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 058d6ecf109b..ae08556b2ef2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1143,8 +1143,6 @@ }; &mipi_csi1 { - #address-cells = <1>; - #size-cells = <0>; status = "okay"; ports { -- cgit From 7e2c9e5146b2fd66bfd6049ece0eee3db3647593 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 31 Aug 2022 22:25:47 +0800 Subject: arm64: dts: imx8ulp: drop undocumented property in cgc The clocks and clocks-names are not documented in binding doc, and the clk-imx8ulp driver not use the undocumented property, so drop them. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 3e8a1e4f0fc2..8460a3cba107 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -164,8 +164,6 @@ cgc1: clock-controller@292c0000 { compatible = "fsl,imx8ulp-cgc1"; reg = <0x292c0000 0x10000>; - clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; - clock-names = "rosc", "sosc", "frosc", "lposc"; #clock-cells = <1>; }; @@ -416,8 +414,6 @@ cgc2: clock-controller@2da60000 { compatible = "fsl,imx8ulp-cgc2"; reg = <0x2da60000 0x10000>; - clocks = <&sosc>, <&frosc>; - clock-names = "sosc", "frosc"; #clock-cells = <1>; }; -- cgit From b2ca63697b0d9b42d9121a57ebe2c07c314f3aeb Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 31 Aug 2022 22:25:48 +0800 Subject: arm64: dts: imx8ulp: correct the scmi sram node name Follow sram/sram.yaml to update the sram node name. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 8460a3cba107..7a88d7016b49 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -112,7 +112,7 @@ #size-cells = <1>; ranges = <0 0x0 0x2201f000 0x1000>; - scmi_buf: scmi-buf@0 { + scmi_buf: scmi-sram-section@0 { compatible = "arm,scmi-shmem"; reg = <0x0 0x400>; }; -- cgit From ed4b58fa5ae715548e9898b475709decc0e1af7b Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 31 Aug 2022 22:25:50 +0800 Subject: arm64: dts: imx8ulp: add pmu node Add i.MX8ULP pmu node Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 7a88d7016b49..feb58e68a9f8 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -63,6 +63,14 @@ interrupts = ; }; + pmu { + compatible = "arm,cortex-a35-pmu"; + interrupt-parent = <&gic>; + interrupts = ; + interrupt-affinity = <&A35_0>, <&A35_1>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; -- cgit From d2209e658468330152982832c1c665abf2aae810 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 31 Aug 2022 22:25:51 +0800 Subject: arm64: dts: imx8ulp: add mailbox node Add Sentinel Message Unit(MU), Generic MU nodes. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index feb58e68a9f8..4de8ed8c78f7 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -152,6 +152,13 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + s4muap: mailbox@27020000 { + compatible = "fsl,imx8ulp-mu-s4"; + reg = <0x27020000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + }; + per_bridge3: bus@29000000 { compatible = "simple-bus"; reg = <0x29000000 0x800000>; @@ -159,6 +166,23 @@ #size-cells = <1>; ranges; + mu: mailbox@29220000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0x29220000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu3: mailbox@29230000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0x29230000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX8ULP_CLK_MU3_A>; + #mbox-cells = <2>; + status = "disabled"; + }; + wdog3: watchdog@292a0000 { compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt"; reg = <0x292a0000 0x10000>; -- cgit From 0acd1b1cf3454d59b811313efe04a3fe9fca662c Mon Sep 17 00:00:00 2001 From: Clark Wang Date: Wed, 31 Aug 2022 22:25:52 +0800 Subject: arm64: dts: imx8ulp: increase the clock speed of LPSPI LPSPI transfer max speed is half of the root clock. Increase the root clock speed to support faster data transmission. And update the parent clock of all i2c/spi with IMX8ULP_CLK_FROSC_DIV2 which could produce accurate clock for i2c/spi usage. Reviewed-by: Haibo Chen Reviewed-by: Jun Li Signed-off-by: Clark Wang Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 4de8ed8c78f7..9a09a13b0e69 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -223,7 +223,7 @@ <&pcc3 IMX8ULP_CLK_LPI2C4>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -236,7 +236,7 @@ <&pcc3 IMX8ULP_CLK_LPI2C5>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -269,8 +269,8 @@ <&pcc3 IMX8ULP_CLK_LPSPI4>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; - assigned-clock-rates = <16000000>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -284,8 +284,8 @@ <&pcc3 IMX8ULP_CLK_LPSPI5>; clock-names = "per", "ipg"; assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; - assigned-clock-rates = <16000000>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; status = "disabled"; }; }; @@ -311,7 +311,7 @@ <&pcc4 IMX8ULP_CLK_LPI2C6>; clock-names = "per", "ipg"; assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; @@ -324,7 +324,7 @@ <&pcc4 IMX8ULP_CLK_LPI2C7>; clock-names = "per", "ipg"; assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>; - assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; assigned-clock-rates = <48000000>; status = "disabled"; }; -- cgit From 8728c63c1072869a638d9963d3621f08ad6d7874 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Thu, 1 Sep 2022 12:01:48 +0200 Subject: arm64: dts: verdin-imx8mm: rename sn65dsi83 to sn65dsi84 Rename sn65dsi83 to sn65dsi84 as that is the exact chip used on the Verdin DSI to LVDS Adapter. Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index d1b4582f44c4..f5a2dade24a1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -561,8 +561,8 @@ status = "disabled"; }; - lvds_ti_sn65dsi83: bridge@2c { - compatible = "ti,sn65dsi83"; + lvds_ti_sn65dsi84: bridge@2c { + compatible = "ti,sn65dsi84"; /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ /* Verdin GPIO_10_DSI (SODIMM 21) */ enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; -- cgit From ac2ac9ff2dff35d0a119d4887859027813a76c2f Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Thu, 1 Sep 2022 12:01:49 +0200 Subject: arm64: dts: verdin-imx8mm: add lvds panel node Add an LVDS panel node to be extended by a device tree overlay. Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index f5a2dade24a1..ca1c087e7c29 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -53,6 +53,13 @@ }; }; + panel_lvds: panel-lvds { + compatible = "panel-lvds"; + backlight = <&backlight>; + data-mapping = "vesa-24"; + status = "disabled"; + }; + /* Carrier Board Supplies */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; -- cgit From 63a71a901021c137a1b9c23f3ac4e8882d044a39 Mon Sep 17 00:00:00 2001 From: Philippe Schenker Date: Thu, 1 Sep 2022 12:01:50 +0200 Subject: arm64: dts: verdin-imx8mm: introduce hdmi-connector The Lontium LT8912B driver needs a HDMI connector to be connected to port 1. Introduce this connector to be enabled in a device tree overlay. Signed-off-by: Philippe Schenker Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index ca1c087e7c29..ef105c0745eb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -53,6 +53,14 @@ }; }; + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c2>; + label = "hdmi"; + type = "a"; + status = "disabled"; + }; + panel_lvds: panel-lvds { compatible = "panel-lvds"; backlight = <&backlight>; -- cgit From fb4f0b69565eef4a13cf3b8534dbc0b8b5505c52 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 5 Sep 2022 09:37:30 +0200 Subject: arm64: dts: tqma8mpql: add USB DR support Add support for USB DR on USB1 interface. Host/Device detection is done using the usb-role-switch connector. Signed-off-by: Alexander Stein Reviewed-by: Fabio Estevam Reviewed-by: Li Jun Signed-off-by: Shawn Guo --- .../dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index d8ca52976170..88579e8ac93b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -139,6 +139,13 @@ regulator-max-microvolt = <3300000>; }; + reg_vcc_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -445,6 +452,38 @@ status = "okay"; }; +&usb3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + fsl,over-current-active-low; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_vcc_5v0>; + status = "okay"; +}; + +&usb_dwc3_0 { + /* dual role is implemented, but not a full featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; + status = "okay"; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X29"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -666,6 +705,15 @@ ; }; + pinctrl_usb0: usb0grp { + fsl,pins = , + ; + }; + + pinctrl_usbcon0: usb0congrp { + fsl,pins = ; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = , , -- cgit From f2484a9470bf04a56c14c5b1ce62a3e886d385c0 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:09 +0800 Subject: arm64: dts: imx93: correct SDHC clk entry DUMMY clk only works with clk_ignore_unused and bootloader enables those clks that required for SDHC work properly. Correct SDHC clk entry with real clk. Signed-off-by: Haibo Chen Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index f83a07c7c9b1..431dc239631d 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -248,8 +248,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x42850000 0x10000>; interrupts = ; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC1_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <8>; @@ -262,8 +262,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x42860000 0x10000>; interrupts = ; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC2_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -276,8 +276,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x428b0000 0x10000>; interrupts = ; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC3_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; -- cgit From e41ba695713996444c224cdac869a2f36a8514c4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:10 +0800 Subject: arm64: dts: imx93: add gpio clk Add the GPIO clk, otherwise GPIO may not work if clk driver disable the GPIO clk during kernel boot. Reviewed-by: Jacky Bai Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 431dc239631d..26d5ce4a5f2c 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -295,6 +295,9 @@ interrupts = ; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO2_GATE>, + <&clk IMX93_CLK_GPIO2_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 32 32>; }; @@ -306,6 +309,9 @@ interrupts = ; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO3_GATE>, + <&clk IMX93_CLK_GPIO3_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 64 32>; }; @@ -317,6 +323,9 @@ interrupts = ; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO4_GATE>, + <&clk IMX93_CLK_GPIO4_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 96 32>; }; @@ -328,6 +337,9 @@ interrupts = ; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO1_GATE>, + <&clk IMX93_CLK_GPIO1_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 0 32>; }; }; -- cgit From 0dfb380d2492b498166bc06c29618b0e5c81a0f2 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:11 +0800 Subject: arm64: dts: imx93: add s4 mu node Add s4 mu node for sentinel communication Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 26d5ce4a5f2c..bb9e96ffb70a 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -342,5 +342,14 @@ clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 0 32>; }; + + s4muap: mailbox@47520000 { + compatible = "fsl,imx93-mu-s4"; + reg = <0x47520000 0x10000>; + interrupts = , + ; + interrupt-names = "txirq", "rxirq"; + #mbox-cells = <2>; + }; }; }; -- cgit From 000aed86e4039a273abfe9552beb2e83910ecb5a Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:12 +0800 Subject: arm64: dts: imx93: add blk ctrl node Add i.MX93 BLK CTRL MIX node Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index bb9e96ffb70a..93f96067456e 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -112,6 +112,11 @@ #size-cells = <1>; ranges; + anomix_ns_gpr: syscon@44210000 { + compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; + reg = <0x44210000 0x1000>; + }; + mu1: mailbox@44230000 { compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; reg = <0x44230000 0x10000>; @@ -174,6 +179,11 @@ #size-cells = <1>; ranges; + wakeupmix_gpr: syscon@42420000 { + compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; + reg = <0x42420000 0x1000>; + }; + mu2: mailbox@42440000 { compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; reg = <0x42440000 0x10000>; -- cgit From b4aa33b3e51b4357e4c9728ad3a4a37b2e34ff83 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:13 +0800 Subject: arm64: dts: imx93: add a55 pmu Add A55 PMU node for perf usage Reviewed-by: Ye Li Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 93f96067456e..9f6e8a386071 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -72,6 +72,11 @@ clock-output-names = "clk_ext1"; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = ; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; -- cgit From 1225396fefea1b6e23e721779a590885f1fe9452 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:14 +0800 Subject: arm64: dts: imx93: add lpi2c nodes Add i.MX93 lpi2c nodes Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 89 ++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 9f6e8a386071..1a5a6c51aec4 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -16,6 +16,14 @@ #size-cells = <2>; aliases { + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -138,6 +146,26 @@ clock-names = "per"; }; + lpi2c1: i2c@44340000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44340000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C1_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c2: i2c@44350000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x44350000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C2_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart1: serial@44380000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; @@ -197,6 +225,26 @@ status = "disabled"; }; + lpi2c3: i2c@42530000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42530000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C3_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c4: i2c@42540000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x42540000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C4_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart3: serial@42570000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42570000 0x1000>; @@ -250,6 +298,47 @@ clock-names = "ipg"; status = "disabled"; }; + + lpi2c5: i2c@426b0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426b0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C5_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c6: i2c@426c0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426c0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C6_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c7: i2c@426d0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426d0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C7_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c8: i2c@426e0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426e0000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPI2C8_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + }; aips3: bus@42800000 { -- cgit From aff77421f13f28bff9a1900a1fdedb21a02149e5 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 5 Sep 2022 13:59:15 +0800 Subject: arm64: dts: imx93: add lpspi nodes Add i.MX93 lpspi nodes Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 1a5a6c51aec4..b3d82b13b524 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -166,6 +166,30 @@ status = "disabled"; }; + lpspi1: spi@44360000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44360000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPSPI1_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi2: spi@44370000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44370000 0x10000>; + interrupts = ; + clocks = <&clk IMX93_CLK_LPSPI2_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart1: serial@44380000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; -- cgit From d314fd245d24a2ec5e6389817dd29cd3b907504a Mon Sep 17 00:00:00 2001 From: Joy Zou Date: Mon, 5 Sep 2022 16:39:23 +0800 Subject: arm64: dts: imx8mq: update sdma node name format Node names should be generic, so change the sdma node name format 'sdma' into 'dma-controller'. Signed-off-by: Joy Zou Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e9f0cdd10ab6..19eaa523564d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -534,7 +534,7 @@ status = "disabled"; }; - sdma2: sdma@302c0000 { + sdma2: dma-controller@302c0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x302c0000 0x10000>; interrupts = ; @@ -1302,7 +1302,7 @@ status = "disabled"; }; - sdma1: sdma@30bd0000 { + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; -- cgit From 5dfc7922ba02206c72a8844ac6b6bf0d7170a38f Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 6 Sep 2022 00:24:58 +0300 Subject: arm64: dts: ls1028a-rdb: add more ethernet aliases Commit "arm64: dts: ls1028a: enable swp5 and eno3 for all boards" which Shawn declared as applied, but for which I can't find a sha1sum, has enabled a new Ethernet port on the LS1028A-RDB (&enetc_port3), but U-Boot, which passes a MAC address to Linux' device tree through the /aliases node, fails to do this for this newly enabled port. Fix that by adding more ethernet aliases in the only backwards-compatible way possible: at the end of the current list. And since it is possible to very easily convert either swp4 or swp5 to DSA user ports now (which have a MAC address of their own), using these U-Boot commands: => fdt addr $fdt_addr_r => fdt rm /soc/pcie@1f0000000/ethernet-switch@0,5/ports/port@4 ethernet it would be good if those DSA user ports (swp4, swp5) gained a valid MAC address from U-Boot as well. In order for that to work properly, provision two more ethernet aliases for &mscc_felix_port{4,5} as well. The resulting ordering is slightly unusual, but to me looks more natural than eno0, eno2, swp0, swp1, swp2, swp3, eno3, swp4, swp5. Signed-off-by: Vladimir Oltean Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index e33725c60169..ecd2c1ea177f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -29,6 +29,9 @@ ethernet3 = &mscc_felix_port1; ethernet4 = &mscc_felix_port2; ethernet5 = &mscc_felix_port3; + ethernet6 = &mscc_felix_port4; + ethernet7 = &mscc_felix_port5; + ethernet8 = &enetc_port3; }; chosen { -- cgit From e85d3458a804266d15dce47618b1af081899aff4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 6 Sep 2022 11:28:16 +0800 Subject: arm64: dts: imx93: add src node Add i.MX93 SRC node Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index b3d82b13b524..2eb6932c9f22 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -223,6 +223,30 @@ status = "okay"; }; + src: system-controller@44460000 { + compatible = "fsl,imx93-src", "syscon"; + reg = <0x44460000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mediamix: power-domain@44462400 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; + + mlmix: power-domain@44461800 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44461800 0x400>, <0x44464800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_ML_APB>, + <&clk IMX93_CLK_ML>; + }; + }; + anatop: anatop@44480000 { compatible = "fsl,imx93-anatop", "syscon"; reg = <0x44480000 0x10000>; -- cgit From a90a37bbeab4518cc3bf5c4d1eb088cf8993fcf9 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 12 Sep 2022 18:02:34 +0800 Subject: arm64: dts: imx93: add mediamix blk ctrl node Add i.MX93 mediamix blk ctrl node Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 2eb6932c9f22..3a5713bb4880 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include "imx93-pinfunc.h" @@ -503,5 +504,25 @@ interrupt-names = "txirq", "rxirq"; #mbox-cells = <2>; }; + + media_blk_ctrl: system-controller@4ac10000 { + compatible = "fsl,imx93-media-blk-ctrl", "syscon"; + reg = <0x4ac10000 0x10000>; + power-domains = <&mediamix>; + clocks = <&clk IMX93_CLK_MEDIA_APB>, + <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_NIC_MEDIA_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_CAM_PIX>, + <&clk IMX93_CLK_PXP_GATE>, + <&clk IMX93_CLK_LCDIF_GATE>, + <&clk IMX93_CLK_ISI_GATE>, + <&clk IMX93_CLK_MIPI_CSI_GATE>, + <&clk IMX93_CLK_MIPI_DSI_GATE>; + clock-names = "apb", "axi", "nic", "disp", "cam", + "pxp", "lcdif", "isi", "csi", "dsi"; + #power-domain-cells = <1>; + status = "disabled"; + }; }; }; -- cgit From 21e24d257fe23ff53f6db3b4af2f06c07766396e Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 8 Sep 2022 08:42:27 -0700 Subject: arm64: dts: imx8mp-venice-gw74xx: add USB DR support Add support for USB DR on USB1 interface. Host/Device detection is done using the usb-role-switch connector with a GPIO as USB1_OTG_ID is not connected internally. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mp-venice-gw74xx.dts | 30 ++++++++++++++++++---- 1 file changed, 25 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 521215520a0f..d3f7cc66bab8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -563,20 +563,35 @@ }; /* USB1 - Type C front panel */ -&usb3_phy0 { +&usb3_0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; + fsl,over-current-active-low; status = "okay"; }; -&usb3_0 { - fsl,over-current-active-low; +&usb3_phy0 { status = "okay"; }; &usb_dwc3_0 { - dr_mode = "host"; + /* dual role is implemented but not a full featured OTG */ + adp-disable; + hnp-disable; + srp-disable; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; status = "okay"; + + connector { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "Type-C"; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; }; /* USB2 - USB3.0 Hub */ @@ -825,7 +840,12 @@ pinctrl_usb1: usb1grp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 - MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140 + >; + }; + + pinctrl_usbcon1: usb1congrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; -- cgit From 07ce211afa5af60561a0c59049ed1d9d0df1b3ed Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 12 Sep 2022 11:08:35 -0700 Subject: arm64: dts: imx8mp-venice-gw74xx: add cpu-supply node for cpufreq Add regulator config for cpu-supply in order to support cpufreq. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index d3f7cc66bab8..dcb7b01fc9fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -142,6 +142,22 @@ }; }; +&A53_0 { + cpu-supply = <®_arm>; +}; + +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; +}; + /* off-board header */ &ecspi2 { pinctrl-names = "default"; @@ -362,7 +378,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_arm: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1025000>; -- cgit From 870f645b396bbb65de2dc39423f68c7e8293e849 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 12 Sep 2022 11:08:36 -0700 Subject: arm64: dts: imx8mp-venice-gw74xx: add WiFi/BT module support The GW74xx supports an on-board Laird Connectivity Sterling LWB5+ module which uses a Cypress CYW4373W chip to provide 1x1 802.11 a/b/g/n/ac + Bluetooth 5.2. Add the proper device-tree nodes for it. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mp-venice-gw74xx.dts | 62 ++++++++++++++++++++-- 1 file changed, 59 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index dcb7b01fc9fa..169c0b922907 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -135,10 +135,10 @@ compatible = "regulator-fixed"; regulator-name = "wl"; gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; - startup-delay-us = <100>; + startup-delay-us = <70000>; enable-active-high; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; }; @@ -572,6 +572,21 @@ status = "okay"; }; +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + }; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; @@ -627,6 +642,25 @@ status = "okay"; }; +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi_en>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@0 { + compatible = "cypress,cyw4373-fmac"; + reg = <0>; + }; +}; + /* eMMC */ &usdhc3 { assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; @@ -876,6 +910,28 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 -- cgit From b999bdaf0597c38cf68679b1788aa00cab4fc801 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 12 Sep 2022 11:18:19 -0700 Subject: arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support The GW7904 is based on the i.MX 8M Mini SoC featuring: - LPDDR4 DRAM - eMMC FLASH - microSD connector with UHS support - LIS2DE12 3-axis accelerometer - Gateworks System Controller - IMX8M FEC - 2x RS232 off-board connectors - PMIC - 10x bi-color LED's - 1x miniPCIe socket with PCIe and USB2.0 - 802.3at Class 4 PoE - 10-30VDC input via barrel-jack Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mm-venice-gw7904.dts | 888 +++++++++++++++++++++ 2 files changed, 889 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index c0319d288531..57b9ba01a4ca 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts new file mode 100644 index 000000000000..a67771d02146 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -0,0 +1,888 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Gateworks Corporation + */ + +/dts-v1/; + +#include +#include +#include +#include + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7904 i.MX8MM board"; + compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-0 { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-1 { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-2 { + label = "key_erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + key-3 { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + key-4 { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led01_grn"; + gpios = <&gpioled 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led01_yel"; + gpios = <&gpioled 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led02_grn"; + gpios = <&gpioled 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led02_yel"; + gpios = <&gpioled 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led03_grn"; + gpios = <&gpioled 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led03_yel"; + gpios = <&gpioled 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led04_grn"; + gpios = <&gpioled 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led04_yel"; + gpios = <&gpioled 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-8 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led05_grn"; + gpios = <&gpioled 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-9 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led05_yel"; + gpios = <&gpioled 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-10 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led06_grn"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-11 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led06_red"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-12 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led07_grn"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-13 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led07_red"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-14 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led08_grn"; + gpios = <&gpioled 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-15 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led08_yel"; + gpios = <&gpioled 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-16 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led09_grn"; + gpios = <&gpioled 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-17 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led09_yel"; + gpios = <&gpioled 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-18 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led10_grn"; + gpios = <&gpioled 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-19 { + function = LED_FUNCTION_STATUS; + color = ; + label = "led10_yel"; + gpios = <&gpioled 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "rs232_en#", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "pci_wdis#", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + gpioled: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pgc_mipi { + status = "disabled"; +}; + +/* off-board RS232 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* off-board RS232 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */ + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x40000041 /* PCI_WDIS# */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x19 /* IRQ# */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* RST# */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000019 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000019 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000019 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000019 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x41 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; -- cgit From 41d5ceff6052ec269293e13b6bb2a69b82b02438 Mon Sep 17 00:00:00 2001 From: Shenwei Wang Date: Wed, 14 Sep 2022 08:58:46 -0500 Subject: arm64: dts: imx8: add a node label to ddr-pmu The ddr-pmu on i.mx8dxl has a different interrupt number. Add a node label to ddr-pmu so that it could be referred and changed in i.mx8dxl dts. Signed-off-by: Shenwei Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi index 8b5cad4e2700..7d5183c6c5be 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi @@ -10,7 +10,7 @@ ddr_subsys: bus@5c000000 { #size-cells = <1>; ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - ddr-pmu@5c020000 { + ddr_pmu0: ddr-pmu@5c020000 { compatible = "fsl,imx8-ddr-pmu"; reg = <0x5c020000 0x10000>; interrupts = ; -- cgit From f537ee7f1e76990ef9ba0e6d32fd9cc51eb12e43 Mon Sep 17 00:00:00 2001 From: Shenwei Wang Date: Wed, 14 Sep 2022 08:58:47 -0500 Subject: arm64: dts: freescale: add i.MX8DXL SoC support i.MX8DXL is a device targeting the automotive and industrial market segments. The chip is designed to achieve both high performance and low power consumption. It has a dual (2x) Cortex-A35 processor. This patch adds the basic support for i.MX8DXL SoC. Signed-off-by: Shenwei Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi | 52 +++++ arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 142 ++++++++++++ arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 9 + arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 74 +++++++ arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 238 +++++++++++++++++++++ 5 files changed, 515 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi new file mode 100644 index 000000000000..795d1d472fae --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +&audio_ipg_clk { + clock-frequency = <160000000>; +}; + +&dma_ipg_clk { + clock-frequency = <160000000>; +}; + +&i2c0 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = ; +}; + +&i2c1 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = ; +}; + +&i2c2 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = ; +}; + +&i2c3 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = ; +}; + +&lpuart0 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = ; +}; + +&lpuart1 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = ; +}; + +&lpuart2 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = ; +}; + +&lpuart3 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = ; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file mode 100644 index 000000000000..69c4849f2132 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +/delete-node/ &enet1_lpcg; +/delete-node/ &fec2; + +&conn_subsys { + conn_enet0_root_clk: clock-conn-enet0-root { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "conn_enet0_root_clk"; + }; + + eqos: ethernet@5b050000 { + compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x5b050000 0x10000>; + interrupt-parent = <&gic>; + interrupts = , + ; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, + <&eqos_lpcg IMX_LPCG_CLK_6>, + <&eqos_lpcg IMX_LPCG_CLK_0>, + <&eqos_lpcg IMX_LPCG_CLK_5>, + <&eqos_lpcg IMX_LPCG_CLK_2>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <125000000>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + + usbotg2: usb@5b0e0000 { + compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb"; + reg = <0x5b0e0000 0x200>; + interrupt-parent = <&gic>; + interrupts = ; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc2 0>; + /* + * usbotg1 and usbotg2 share one clcok. + * scu firmware disables the access to the clock and keeps + * it always on in case other core (M4) uses one of these. + */ + clocks = <&clk_dummy>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + #stream-id-cells = <1>; + power-domains = <&pd IMX_SC_R_USB_1>; + status = "disabled"; + + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; + }; + + usbmisc2: usbmisc@5b0e0200 { + #index-cells = <1>; + compatible = "fsl,imx7ulp-usbmisc"; + reg = <0x5b0e0200 0x200>; + }; + + usbphy2: usbphy@0x5b110000 { + compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy"; + reg = <0x5b110000 0x1000>; + clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>; + power-domains = <&pd IMX_SC_R_USB_1_PHY>; + status = "disabled"; + }; + + eqos_lpcg: clock-controller@5b240000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&conn_enet0_root_clk>, + <&conn_axi_clk>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>; + clock-indices = , , + , , + ; + clock-output-names = "eqos_ptp", + "eqos_mem_clk", + "eqos_aclk", + "eqos_clk", + "eqos_csr_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; + + usb2_2_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + clock-indices = ; + clocks = <&conn_ipg_clk>; + clock-output-names = "usboh3_2_phy_ipg_clk"; + power-domains = <&pd IMX_SC_R_USB_1_PHY>; + }; + +}; + +&enet0_lpcg { + clocks = <&conn_enet0_root_clk>, + <&conn_enet0_root_clk>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; +}; + +&fec1 { + compatible = "fsl,imx8qm-fec"; + interrupts = , + , + , + ; + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <125000000>; +}; + +&usdhc1 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = ; +}; + +&usdhc2 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = ; +}; + +&usdhc3 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = ; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi new file mode 100644 index 000000000000..550f513708d8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +&ddr_pmu0 { + compatible = "fsl,imx8-ddr-pmu"; + interrupts = ; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi new file mode 100644 index 000000000000..815bd987b09b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +&lsio_gpio0 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = ; +}; + +&lsio_mu0 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = ; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = ; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = ; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = ; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = ; +}; + +&lsio_mu5 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = ; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi new file mode 100644 index 000000000000..5ddbda0b4def --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + ethernet1 = &eqos; + gpio0 = &lsio_gpio0; + gpio1 = &lsio_gpio1; + gpio2 = &lsio_gpio2; + gpio3 = &lsio_gpio3; + gpio4 = &lsio_gpio4; + gpio5 = &lsio_gpio5; + gpio6 = &lsio_gpio6; + gpio7 = &lsio_gpio7; + mu1 = &lsio_mu1; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters with 2 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_opp_table>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_opp_table>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a35_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + system-controller { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", + "rx0", + "gip3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 1 0 + &lsio_mu1 3 3>; + + pd: power-controller { + compatible = "fsl,scu-pd"; + #power-domain-cells = <1>; + wakeup-irq = <160 163 235 236 237 228 229 230 231 238 + 239 240 166 169>; + }; + + clk: clock-controller { + compatible = "fsl,imx8dxl-clk", "fsl,scu-clk"; + #clock-cells = <2>; + clocks = <&xtal32k &xtal24m>; + clock-names = "xtal_32KHz", "xtal_24Mhz"; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8dxl-iomuxc"; + }; + + ocotp: ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + + fec_mac1: mac@2c6 { + reg = <0x2c6 6>; + }; + }; + + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + + sc_pwrkey: keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycode = ; + wakeup-source; + }; + + watchdog { + compatible = "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; + + tsens: thermal-sensor { + compatible = "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , /* Physical Secure */ + , /* Physical Non-Secure */ + , /* Virtual */ + ; /* Hypervisor */ + }; + + thermal_zones: thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; + + trips { + cpu_alert0: trip0 { + temperature = <107000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <127000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + /* The two values below cannot be changed by the board */ + xtal32k: clock-xtal32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32KHz"; + }; + + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + + /* sorted in register address */ + #include "imx8-ss-adma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-ddr.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8dxl-ss-adma.dtsi" +#include "imx8dxl-ss-conn.dtsi" +#include "imx8dxl-ss-lsio.dtsi" +#include "imx8dxl-ss-ddr.dtsi" -- cgit From 8dd495d12374b263caba758942764bf10324348e Mon Sep 17 00:00:00 2001 From: Shenwei Wang Date: Wed, 14 Sep 2022 08:58:48 -0500 Subject: arm64: dts: freescale: add support for i.MX8DXL EVK board This is to support the EVK (Evaluation Kit Board) for the i.MX8DXL. The patch has enabled the serial console, SD/EMMC interface, and the eqos and fec ethernet network. Signed-off-by: Shenwei Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 426 ++++++++++++++++++++++++++ 2 files changed, 427 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 57b9ba01a4ca..912a660d6f74 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file mode 100644 index 000000000000..ca2a43e0cbf6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019~2020, 2022 NXP + */ + +/dts-v1/; + +#include "imx8dxl.dtsi" + +/ { + model = "Freescale i.MX8DXL EVK"; + compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl"; + + aliases { + i2c2 = &i2c2; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart0; + }; + + chosen { + stdout-path = &lpuart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * Memory reserved for optee usage. Please do not use. + * This will be automatically added to dtb if OP-TEE is installed. + * optee@96000000 { + * reg = <0 0x96000000 0 0x2000000>; + * no-map; + * }; + */ + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x14000000>; + alloc-ranges = <0 0x98000000 0 0x14000000>; + linux,cma-default; + }; + }; + + mux3_en: regulator-0 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "mux3_en"; + gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + reg_fec1_sel: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "fec1_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_1 11 GPIO_ACTIVE_LOW>; + regulator-always-on; + status = "disabled"; + }; + + reg_fec1_io: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "fec1_io_supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + status = "disabled"; + }; + + reg_usdhc2_vmmc: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <3480>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + snps,reset-delays-us = <10 20 200000>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + eee-broken-1000t; + qca,disable-smarteee; + vddio-supply = <&vddio0>; + + vddio0: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +/* + * fec1 shares the some PINs with usdhc2. + * by default usdhc2 is enabled in this dts. + * Please disable usdhc2 to enable fec1 + */ +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-txid"; + phy-handle = <ðphy1>; + fsl,magic-packet; + rx-internal-delay-ps = <2000>; + nvmem-cells = <&fec_mac0>; + nvmem-cell-names = "mac-address"; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + qca,disable-smarteee; + vddio-supply = <&vddio1>; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pca6416_1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca6416_2: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9548_1: i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&lsio_gpio4 { + status = "okay"; +}; + +&lsio_gpio5 { + status = "okay"; +}; + +&thermal_zones { + pmic-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0 + IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 0x0600004c + IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN 0x0600004c + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR 0x00000021 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + IMX8DXL_ENET0_MDC_CONN_EQOS_MDC 0x06000020 + IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO 0x06000020 + IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC 0x06000020 + IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0 0x06000020 + IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1 0x06000020 + IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2 0x06000020 + IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3 0x06000020 + IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL 0x06000020 + IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC 0x06000020 + IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0 0x06000020 + IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1 0x06000020 + IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2 0x06000020 + IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3 0x06000020 + IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL 0x06000020 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x000014a0 + IMX8DXL_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060 + IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060 + IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060 + IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060 + IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060 + IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060 + IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060 + IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060 + IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060 + IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060 + IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060 + >; + }; + + pinctrl_lpspi3: lpspi3grp { + fsl,pins = < + IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK 0x6000040 + IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO 0x6000040 + IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI 0x6000040 + IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1 0x6000040 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021 + IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021 + >; + }; + + pinctrl_cm40_lpuart: cm40lpuartgrp { + fsl,pins = < + IMX8DXL_ADC_IN2_M40_UART0_RX 0x06000020 + IMX8DXL_ADC_IN3_M40_UART0_TX 0x06000020 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021 + IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040 /* RESET_B */ + IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021 /* WP */ + IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021 /* CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; -- cgit From 9e1afe14d9c1ed988ec1f8885af4adab49c1c279 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 8 Sep 2022 08:49:03 -0700 Subject: arm64: dts: imx8mp-venice-gw74xx: add PCIe support Add PCIe support on the Gateworks GW74xx board. While at it, fix the related gpio line names from the previous incorrect values. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mp-venice-gw74xx.dts | 40 ++++++++++++++++++++-- 1 file changed, 37 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 169c0b922907..375bde34e854 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -8,6 +8,7 @@ #include #include #include +#include #include "imx8mp.dtsi" @@ -100,6 +101,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -216,8 +223,8 @@ &gpio2 { gpio-line-names = "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "", + "", "", "", "", "", "", "pcie3_wdis#", "", + "", "", "pcie2_wdis#", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; @@ -558,6 +565,28 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + status = "okay"; +}; + /* GPS / off-board header */ &uart1 { pinctrl-names = "default"; @@ -690,7 +719,6 @@ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */ - MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000150 /* PCIE1_WDIS# */ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */ @@ -803,6 +831,12 @@ >; }; + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x110 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140 -- cgit From 61759b114616a18c9ec0accaea35c0c2e25b5dd5 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:15:34 -0500 Subject: arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA Update the cpld node name to be generic board-contrl and add mmio mdio mux nodes from the on-board FPGA. Signed-off-by: Ioana Radulescu Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 65 +++++++++++++++++++++- 1 file changed, 62 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 6fab73d484b6..f598669e742f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -9,6 +9,27 @@ * */ +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; + phy-connection-type = "sgmii"; +}; + +&dpmac10 { + phy-handle = <&mdio0_phy13>; + phy-connection-type = "sgmii"; +}; + +&dpmac11 { + phy-handle = <&mdio0_phy14>; + phy-connection-type = "sgmii"; +}; + +&dpmac12 { + phy-handle = <&mdio0_phy15>; + phy-connection-type = "sgmii"; +}; + &esdhc { mmc-hs200-1_8v; status = "okay"; @@ -36,9 +57,47 @@ reg = <0x2 0x0 0x10000>; }; - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + reg = <3 0 0x1000>; + ranges = <0 3 0 0x1000>; + + mdio-mux-emi1@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio-phy0@1c { + reg = <0x1c>; + }; + + mdio0_phy13: mdio-phy1@1d { + reg = <0x1d>; + }; + + mdio0_phy14: mdio-phy2@1e { + reg = <0x1e>; + }; + + mdio0_phy15: mdio-phy3@1f { + reg = <0x1f>; + }; + }; + }; }; }; -- cgit From 6f4ce5b8f33109eda83e3be4412757446bcac430 Mon Sep 17 00:00:00 2001 From: Ioana Radulescu Date: Wed, 14 Sep 2022 16:15:35 -0500 Subject: arm64: dts: ls2080a-rdb: add phy nodes Define PHY nodes on the board. Signed-off-by: Ioana Radulescu Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 69 +++++++++++++++++++++++ 1 file changed, 69 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 44894356059c..8b6915136997 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -14,6 +14,7 @@ #include "fsl-ls2080a.dtsi" #include "fsl-ls208xa-rdb.dtsi" +#include / { model = "Freescale Layerscape 2080a RDB Board"; @@ -23,3 +24,71 @@ stdout-path = "serial1:115200n8"; }; }; + +&dpmac5 { + phy-handle = <&mdio2_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac6 { + phy-handle = <&mdio2_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac7 { + phy-handle = <&mdio2_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac8 { + phy-handle = <&mdio2_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&emdio1 { + status = "disabled"; + + /* CS4340 PHYs */ + mdio1_phy1: emdio1-phy@10 { + reg = <0x10>; + }; + + mdio1_phy2: emdio1-phy@11 { + reg = <0x11>; + }; + + mdio1_phy3: emdio1-phy@12 { + reg = <0x12>; + }; + + mdio1_phy4: emdio1-phy@13 { + reg = <0x13>; + }; +}; + +&emdio2 { + /* AQR405 PHYs */ + mdio2_phy1: emdio2-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = ; + reg = <0x0>; + }; + + mdio2_phy2: emdio2-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = ; + reg = <0x1>; + }; + + mdio2_phy3: emdio2-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = ; + reg = <0x2>; + }; + + mdio2_phy4: emdio2-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = ; + reg = <0x3>; + }; +}; -- cgit From ad5b6611e1574356efc214e94249fefd055dd202 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Wed, 14 Sep 2022 16:15:36 -0500 Subject: arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB This patch adds support for NXP LS2081ARDB board which has LS2081A SoC. LS2081A SoC is 40-pin derivative of LS2088A SoC. From functional perspective both are same. Hence, LS2088a SoC dtsi file is included from LS2081ARDB dts. Signed-off-by: Priyanka Jain Signed-off-by: Santan Kumar Signed-off-by: Tao Yang Signed-off-by: Yogesh Gaur Signed-off-by: Abhimanyu Saini Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts | 132 ++++++++++++++++++++++ 2 files changed, 133 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 912a660d6f74..3ea9edc87909 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts new file mode 100644 index 000000000000..4461e16fd53a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for NXP LS2081A RDB Board. + * + * Copyright 2017 NXP + * + * Priyanka Jain + * + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" + +/ { + model = "NXP Layerscape 2081A RDB Board"; + compatible = "fsl,ls2081a-rdb", "fsl,ls2081a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&dspi { + status = "okay"; + + n25q512a: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9547: mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + status = "disabled"; +}; + +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <20000000>; + reg = <0>; + }; + + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- cgit From 822f91d512abfe70349fce7b79cbdee8d0d016e9 Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 14 Sep 2022 16:15:37 -0500 Subject: arm64: dts: ls208xa-rdb: fix errata E-00013 Specify a channel zero in idle state to avoid enterring tri-stated state for PCA9547. Some information about E-00013: - Description: I2C1 and I2C3 buses are missing pull-up. - Impact: When the PCA954x device is tri-stated, the I2C bus will float. This makes the I2C bus and its associated downstream devices inaccessible. - Hardware fix: Populate resistors R189 and R190 for I2C1 and resistors R228 and R229 for I2C3. - Software fix: Remove the tri-state option from the PCA954x driver(PCA954x always on enable status, specify a channel zero in dts to fix the errata E-00013). Signed-off-by: Biwen Li Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index f8135c5c252d..3d9647b3da14 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -49,6 +49,8 @@ reg = <0x75>; #address-cells = <1>; #size-cells = <0>; + idle-state = <0>; + i2c@1 { #address-cells = <1>; #size-cells = <0>; -- cgit From 4dede987d9aabf6da081e5d84f06dde6823d806f Mon Sep 17 00:00:00 2001 From: Pankaj Bansal Date: Wed, 14 Sep 2022 16:15:38 -0500 Subject: arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A. NXP Erratum A008585 affects A57 core cluster used in LS2085 rev1. However this problem has been fixed in A72 core cluster used in LS2088. Therefore remove the erratum from LS2088A. Keeping it only in LS2085. Signed-off-by: Pankaj Bansal Reviewed-by: Sandeep Malik Acked-by: Priyanka Jain Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 3 +-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 6f6667b70028..a2cadf757148 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -150,3 +150,7 @@ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + +&timer { + fsl,erratum-a008585; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index d76f1c42f3fa..f1b9cc8714dc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -239,13 +239,12 @@ }; }; - timer { + timer: timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ <1 14 4>, /* Physical Non-Secure PPI, active-low */ <1 11 4>, /* Virtual PPI, active-low */ <1 10 4>; /* Hypervisor PPI, active-low */ - fsl,erratum-a008585; }; pmu { -- cgit From 9b6408f02708c4e6e388e9b3474d8c62b525d909 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:46:53 -0500 Subject: arm64: dts: ls1043a: fix the wrong size of dcfg space The size of the block should be 0x1000 instead of 0x10000. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ca3d5a90d6d4..e6fce671799d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -393,7 +393,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; -- cgit From d7b01cca020ac66f917800b63e1f41fc1ff927f6 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:46:54 -0500 Subject: arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node Enable USB3 HW LPM feature for ls1043a. Signed-off-by: Ran Wang Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index e6fce671799d..3ba66b18de35 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -817,6 +817,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -828,6 +829,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -839,6 +841,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; -- cgit From ee00c1a6314d5cebbe4f84ddd046dbbbd7788cf6 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:46:55 -0500 Subject: arm64: dts: ls1043a: use pcie aer/pme interrupts After the binding has been updated to include more specific interrupt definition, update the dts to use the more specific interrupt names. Signed-off-by: Po Liu Signed-off-by: Hou Zhiqiang Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 3ba66b18de35..d04d4ac66d2a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -883,9 +883,9 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -909,9 +909,9 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>, + <0 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -935,9 +935,9 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -- cgit From 8580b6aa02acc8a2094d01a291a06774ef6ded2e Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Wed, 14 Sep 2022 16:46:56 -0500 Subject: arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes The LS1043A PCIe controller has some control registers in SCFG block, so add the SCFG phandle for each PCIe controller node. Signed-off-by: Hou Zhiqiang Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index d04d4ac66d2a..e1c5d685a9e3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -901,6 +901,7 @@ <0000 0 0 2 &gic 0 111 0x4>, <0000 0 0 3 &gic 0 112 0x4>, <0000 0 0 4 &gic 0 113 0x4>; + fsl,pcie-scfg = <&scfg 0>; status = "disabled"; }; @@ -927,6 +928,7 @@ <0000 0 0 2 &gic 0 121 0x4>, <0000 0 0 3 &gic 0 122 0x4>, <0000 0 0 4 &gic 0 123 0x4>; + fsl,pcie-scfg = <&scfg 1>; status = "disabled"; }; @@ -953,6 +955,7 @@ <0000 0 0 2 &gic 0 155 0x4>, <0000 0 0 3 &gic 0 156 0x4>, <0000 0 0 4 &gic 0 157 0x4>; + fsl,pcie-scfg = <&scfg 2>; status = "disabled"; }; -- cgit From 5c4820af65315cafc69f6a45436027ea70009fd1 Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Wed, 14 Sep 2022 16:46:57 -0500 Subject: arm64: dts: ls1043a: Add big-endian property for PCIe nodes Add the big-endian property for LS1043A PCIe nodes for accessing PEX_LUT and PF register block. Signed-off-by: Hou Zhiqiang Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index e1c5d685a9e3..3cf6722e7555 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -902,6 +902,7 @@ <0000 0 0 3 &gic 0 112 0x4>, <0000 0 0 4 &gic 0 113 0x4>; fsl,pcie-scfg = <&scfg 0>; + big-endian; status = "disabled"; }; @@ -929,6 +930,7 @@ <0000 0 0 3 &gic 0 122 0x4>, <0000 0 0 4 &gic 0 123 0x4>; fsl,pcie-scfg = <&scfg 1>; + big-endian; status = "disabled"; }; @@ -956,6 +958,7 @@ <0000 0 0 3 &gic 0 156 0x4>, <0000 0 0 4 &gic 0 157 0x4>; fsl,pcie-scfg = <&scfg 2>; + big-endian; status = "disabled"; }; -- cgit From 21d5096f840b32ac97f0f0ee6fec30a802afa526 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 14 Sep 2022 16:46:58 -0500 Subject: arm64: dts: ls1043a: add missing dma ranges property ls1043a has a 48-bit address size so make sure that the dma-ranges reflects this. Otherwise the linux kernel's dma sub-system will set the default dma masks to full 64-bit, badly breaking dmas. Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 3cf6722e7555..0da8d814297c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -300,6 +300,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1ee1000 { compatible = "fsl,ls1043a-clockgen"; -- cgit From f0560158da0bfb808d318a279f80565035fd619a Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:46:59 -0500 Subject: arm64: dts: ls1043a: make dma-coherent global to the SoC ls1043a is really completely dma coherent in their entirety so add the dma-coherent property at the soc level in the device tree and drop the instances where it's specifically added to a few select devices. Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 0da8d814297c..5749de512201 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -301,6 +301,7 @@ #size-cells = <2>; ranges; dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; clockgen: clocking@1ee1000 { compatible = "fsl,ls1043a-clockgen"; @@ -890,7 +891,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -918,7 +918,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -946,7 +945,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ -- cgit From 4b211ebb887f42ff42d72d7766f3b52399004417 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:47:00 -0500 Subject: arm64: dts: ls1043a: add gpio based i2c recovery information Add scl-gpios property for i2c recovery and add SoC specific compatible string for SoC specific fixup. Signed-off-by: Zhang Ying Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 5749de512201..58c55335f09c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include / { compatible = "fsl,ls1043a"; @@ -538,7 +539,7 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -553,7 +554,7 @@ }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; @@ -561,11 +562,12 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c2: i2c@21a0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; @@ -573,11 +575,12 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; @@ -585,6 +588,7 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; -- cgit From 2a2ab4d5206d25875e30a8a8153f0b4f3c951ee4 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 14 Sep 2022 16:47:01 -0500 Subject: arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size Wrap the usb and sata controllers in an intermediate simple-bus and use it to constrain the dma address size of these usb controllers to the 40 bits that they generate toward the interconnect. This is required because the SoC uses 48 bits address sizes and this mismatch would lead to smmu context faults because the usb generates 40-bit addresses while the smmu page tables are populated with 48-bit wide addresses. Suggested-by: Robin Murphy Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 92 ++++++++++++++------------ 1 file changed, 50 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 58c55335f09c..704f72caddd3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -816,51 +816,59 @@ QORIQ_CLK_PLL_DIV(1)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <0 60 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - usb3-lpm-capable; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <0 61 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - usb3-lpm-capable; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 63 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - usb3-lpm-capable; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - sata: sata@3200000 { - compatible = "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = <0 69 0x4>; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(1)>; - dma-coherent; + sata: sata@3200000 { + compatible = "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; + dma-coherent; + }; }; msi1: msi-controller1@1571000 { -- cgit From ab9d8032dbd03a23993d2913db07aac9c47385bb Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:47:02 -0500 Subject: arm64: dts: ls1043a-qds: add mmio based mdio-mux support There is mmio based mdio mux function in the FPGA device on ls1043a-qds board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and add simple-mfd as a compatbile for the FPGA node to reflect the multi-function nature of it. Also connect the ethernet interfaces to these phy interfaces. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 173 +++++++++++++++++++++- 1 file changed, 171 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index fea167d222cf..9b726c2a4842 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -3,7 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. - * Copyright 2018 NXP + * Copyright 2018-2021 NXP * * Mingkai Hu */ @@ -24,6 +24,22 @@ serial1 = &duart1; serial2 = &duart2; serial3 = &duart3; + sgmii-riser-s1-p1 = &sgmii_phy_s1_p1; + sgmii-riser-s2-p1 = &sgmii_phy_s2_p1; + sgmii-riser-s3-p1 = &sgmii_phy_s3_p1; + sgmii-riser-s4-p1 = &sgmii_phy_s4_p1; + qsgmii-s1-p1 = &qsgmii_phy_s1_p1; + qsgmii-s1-p2 = &qsgmii_phy_s1_p2; + qsgmii-s1-p3 = &qsgmii_phy_s1_p3; + qsgmii-s1-p4 = &qsgmii_phy_s1_p4; + qsgmii-s2-p1 = &qsgmii_phy_s2_p1; + qsgmii-s2-p2 = &qsgmii_phy_s2_p2; + qsgmii-s2-p3 = &qsgmii_phy_s2_p3; + qsgmii-s2-p4 = &qsgmii_phy_s2_p4; + emi1-slot1 = &ls1043mdio_s1; + emi1-slot2 = &ls1043mdio_s2; + emi1-slot3 = &ls1043mdio_s3; + emi1-slot4 = &ls1043mdio_s4; }; chosen { @@ -62,8 +78,11 @@ }; fpga: board-control@2,0 { - compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis"; + compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; reg = <0x2 0x0 0x0000100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2 0 0x100>; }; }; @@ -153,3 +172,153 @@ }; #include "fsl-ls1043-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&qsgmii_phy_s2_p2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy_s2_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy_s2_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + fixed-link = <1 1 10000 0 0>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + mdio-mux-emi1@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1043mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1043mdio1: mdio@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1043mdio_s1: mdio@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s1_p1: ethernet-phy@4 { + reg = <0x4>; + }; + + qsgmii_phy_s1_p2: ethernet-phy@5 { + reg = <0x5>; + }; + + qsgmii_phy_s1_p3: ethernet-phy@6 { + reg = <0x6>; + }; + + qsgmii_phy_s1_p4: ethernet-phy@7 { + reg = <0x7>; + }; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 2 */ + ls1043mdio_s2: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + + sgmii_phy_s2_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 3 */ + ls1043mdio_s3: mdio@80 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s3_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 4 */ + ls1043mdio_s4: mdio@a0 { + reg = <0xa0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; -- cgit From a81e12d2ac5f4b4867760b95dc5398db76b26016 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 14 Sep 2022 16:47:03 -0500 Subject: arm64: dts: ls1043a-rdb: add pcf85263 rtc node Add the missing node for rtc device under i2c and fix style problems at the same time. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index b290605e92cf..26f8540cb101 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -29,23 +29,33 @@ &i2c0 { status = "okay"; + ina220@40 { compatible = "ti,ina220"; reg = <0x40>; shunt-resistor = <1000>; }; + adt7461a@4c { compatible = "adi,adt7461"; reg = <0x4c>; }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; + eeprom@52 { compatible = "atmel,24c512"; reg = <0x52>; }; + eeprom@53 { compatible = "atmel,24c512"; reg = <0x53>; }; + rtc@68 { compatible = "pericom,pt7c4338"; reg = <0x68>; -- cgit From 6f3e8922e51c9be4c6bd45b298477fc2c722b52e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 15 Sep 2022 18:34:24 -0500 Subject: arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node Enable USB3 HW LPM feature for ls1046a. Signed-off-by: Ran Wang Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index feab604322cf..ddae3cb0a977 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -717,6 +717,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; }; usb1: usb@3000000 { @@ -727,6 +728,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; }; usb2: usb@3100000 { @@ -737,6 +739,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; }; sata: sata@3200000 { -- cgit From 163608619b71a3739d295599c10384c7b9986358 Mon Sep 17 00:00:00 2001 From: Xiaowei Bao Date: Thu, 15 Sep 2022 18:34:25 -0500 Subject: arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes Add the PME interrupt porperty and big-endian property in PCIe EP nodes. Signed-off-by: Xiaowei Bao Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index ddae3cb0a977..8002d83b341b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -813,8 +813,11 @@ reg = <0x00 0x03400000 0x0 0x00100000>, <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = ; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; @@ -849,8 +852,11 @@ reg = <0x00 0x03500000 0x0 0x00100000>, <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = ; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; @@ -885,8 +891,11 @@ reg = <0x00 0x03600000 0x0 0x00100000>, <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; + interrupts = ; + interrupt-names = "pme"; num-ib-windows = <6>; num-ob-windows = <8>; + big-endian; status = "disabled"; }; -- cgit From b236df8982456206d8dd85f1113b6b2eb8cca89c Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Thu, 15 Sep 2022 18:34:26 -0500 Subject: arm64: dts: ls1046a: Add big-endian property for PCIe nodes Add the big-endian property for LS1046A PCIe RC nodes. Signed-off-by: Hou Zhiqiang Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 8002d83b341b..a0619a45f3b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -805,6 +805,7 @@ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -844,6 +845,7 @@ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; @@ -883,6 +885,7 @@ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; }; -- cgit From 0d3990796fba84d4141333b8e78ea61a21fb5524 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Thu, 15 Sep 2022 18:34:27 -0500 Subject: arm64: dts: ls1046a: add missing dma ranges property These chips have a 48-bit address size so make sure that the dma-ranges reflects this. Otherwise the linux kernel's dma sub-system will set the default dma masks to full 64-bit, badly breaking dmas. Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index a0619a45f3b8..27033c558e3e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -272,6 +272,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; -- cgit From 136975c33894e7b48a6007af0f4c25f423bbd1de Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 15 Sep 2022 18:34:28 -0500 Subject: arm64: dts: ls1046a: make dma-coherent global to the SoC These SoCs are really completely dma coherent in their entirety so add the dma-coherent property at the soc level in the device tree and drop the instances where it's specifically added to a few select devices. Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 27033c558e3e..e406499a26b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -273,6 +273,7 @@ #size-cells = <2>; ranges; dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; @@ -355,7 +356,6 @@ ranges = <0x0 0x00 0x1700000 0x100000>; reg = <0x00 0x1700000 0x0 0x100000>; interrupts = ; - dma-coherent; sec_jr0: jr@10000 { compatible = "fsl,sec-v5.4-job-ring", @@ -794,7 +794,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -834,7 +833,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -874,7 +872,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ -- cgit From f8179c89d7b1b3acb92460594b9adf1fbdf5a424 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Thu, 15 Sep 2022 18:34:29 -0500 Subject: arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size Wrap the usb and sata controllers in an intermediate simple-bus and use it to constrain the dma address size of these usb controllers to the 40 bits that they generate toward the interconnect. This is required because the SoC uses 48 bits address sizes and this mismatch would lead to smmu context faults because the usb generates 40-bit addresses while the smmu page tables are populated with 48-bit wide addresses. Suggested-by: Robin Murphy Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 90 ++++++++++++++------------ 1 file changed, 49 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index e406499a26b4..132d7893b4b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -710,47 +710,55 @@ QORIQ_CLK_PLL_DIV(2)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - usb3-lpm-capable; - }; - - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - usb3-lpm-capable; - }; - - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - usb3-lpm-capable; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = ; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(2)>; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + }; }; msi1: msi-controller@1580000 { -- cgit From 0f62994a559acdae1ac420b62329cd6517b4ef72 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 15 Sep 2022 18:34:30 -0500 Subject: arm64: dts: ls1046a: add gpios based i2c recovery information Add scl-gpios property for i2c recovery and add SoC specific compatible string for SoC specific fixup. Signed-off-by: Zhang Ying Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 132d7893b4b8..3d9e29824bb2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include / { compatible = "fsl,ls1046a"; @@ -501,7 +502,7 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -515,35 +516,38 @@ }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = ; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c2: i2c@21a0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = ; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = ; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; -- cgit From 63c396414bfcbbe396cda023894c463ec0953570 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 15 Sep 2022 18:34:31 -0500 Subject: arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA There is mmio based mdio mux function in the FPGA device on ls1046a-qds board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and add simple-mfd as a compatbile for the FPGA node to reflect the multi-function nature of it. Signed-off-by: Camelia Groza Signed-off-by: Pankaj Bansal Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 155 +++++++++++++++++++++- 1 file changed, 153 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index eec62c63dafe..f969173fb337 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -3,7 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2018 NXP + * Copyright 2018-2019 NXP * * Shaohui Xie */ @@ -17,14 +17,26 @@ compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; aliases { + emi1-slot1 = &ls1046mdio_s1; + emi1-slot2 = &ls1046mdio_s2; + emi1-slot4 = &ls1046mdio_s4; gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; + qsgmii-s2-p1 = &qsgmii_phy_s2_p1; + qsgmii-s2-p2 = &qsgmii_phy_s2_p2; + qsgmii-s2-p3 = &qsgmii_phy_s2_p3; + qsgmii-s2-p4 = &qsgmii_phy_s2_p4; serial0 = &duart0; serial1 = &duart1; serial2 = &duart2; serial3 = &duart3; + sgmii-s1-p1 = &sgmii_phy_s1_p1; + sgmii-s1-p2 = &sgmii_phy_s1_p2; + sgmii-s1-p3 = &sgmii_phy_s1_p3; + sgmii-s1-p4 = &sgmii_phy_s1_p4; + sgmii-s4-p1 = &sgmii_phy_s4_p1; }; chosen { @@ -153,8 +165,9 @@ }; fpga: board-control@2,0 { - compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; + compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; reg = <0x2 0x0 0x0000100>; + ranges = <0 2 0 0x100>; }; }; @@ -177,3 +190,141 @@ }; #include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmii_phy_s4_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&sgmii_phy_s1_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&sgmii_phy_s1_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + phy-handle = <&sgmii_phy_s1_p1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* DTSEC10/10GEC2 */ + phy-handle = <&sgmii_phy_s1_p2>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + #address-cells = <1>; + #size-cells = <1>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1046mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1046mdio1: mdio@1 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1046mdio_s1: mdio@2 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmii_phy_s1_p2: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmii_phy_s1_p3: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmii_phy_s1_p4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 2 */ + ls1046mdio_s2: mdio@3 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + }; + + /* Slot 4 */ + ls1046mdio_s4: mdio@5 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; -- cgit From d4e87e4e8486ce255e46e4b866e84416cc0d2a89 Mon Sep 17 00:00:00 2001 From: Pankaj Bansal Date: Thu, 15 Sep 2022 18:34:32 -0500 Subject: arm64: dts: ls1046a-qds: Modify the qspi flash frequency The qspi flash in ls1046a QDS board can operate at 50MHz frequency. Therefore, update the maximum supported freq in dts file. Signed-off-by: Pankaj Bansal Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index f969173fb337..b2fcbba60d3a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -182,7 +182,7 @@ compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; reg = <0>; -- cgit From a43306faeea860a6e36b1f0e23881ab4bb75943e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:48 +0200 Subject: arm64: dts: renesas: r8a779g0: Add RWDT node Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas R-Car V4H (R8A779G0) SoC. Based on a patch in the BSP by Thanh Quan. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/187904c279be6654ea3deb11b7250b64dd18c3b5.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 1c15726cff8b..63319fee25d9 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -59,6 +59,17 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779g0-wdt", + "renesas,rcar-gen4-wdt"; + reg = <0 0xe6020000 0 0x0c>; + interrupts = ; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779g0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; -- cgit From 495e36c3a3134b0f3b89f64cd90d3ed722ac0586 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:49 +0200 Subject: arm64: dts: renesas: white-hawk-cpu: Enable watchdog timer Enable the watchdog timer on the White Hawk CPU board. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/77a0e29d965032115de1f07ceecb2d5d07db74eb.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index ea4ae4b893ab..9d20d3e10edc 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -43,3 +43,8 @@ &scif_clk { clock-frequency = <24000000>; }; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; -- cgit From 4cebce2577239fc02fd396327b01db97b2f6e257 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:50 +0200 Subject: arm64: dts: renesas: r8a779g0: Add pinctrl device node Add a device node for the Pin Function Controller on the Renesas R-Car V4H (R8A779G0) SoC. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/ecddcadd2fad46b1cf4c9be3ec750f360b9730e4.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 63319fee25d9..71fce6c03af0 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -70,6 +70,15 @@ status = "disabled"; }; + pfc: pinctrl@e6050000 { + compatible = "renesas,pfc-r8a779g0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>, + <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>, + <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>, + <0 0xe6068000 0 0x16c>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779g0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; -- cgit From 7a8d590de81328537dc43ceebe4ad29cde3dc08b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:51 +0200 Subject: arm64: dts: renesas: white-hawk-cpu: Add serial port pin control Complete the description of the serial console and the external serial clock by adding pin control. Based on larger patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/74c862ef6e46b4af398d9b371ff38fae17b3db05.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index 9d20d3e10edc..ba8cc162076c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -40,6 +40,21 @@ status = "okay"; }; +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + hscif0_pins: hscif0 { + groups = "hscif0_data"; + function = "hscif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + &scif_clk { clock-frequency = <24000000>; }; -- cgit From ff77ba0514855c106f8683b56a9a79b7464509c3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:52 +0200 Subject: arm64: dts: renesas: r8a779g0: Add I2C nodes Add device nodes for the I2C Bus Interfaces on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/272fd18fed2d7addfbdb7945ae2134988a7c3a7e.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 84 +++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 71fce6c03af0..475b428ea734 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -100,6 +100,90 @@ #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a779g0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a779g0", "renesas,rcar-gen4-hscif", -- cgit From 77643815b019d3e78b2ca028d701f95df58e7cf3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:53 +0200 Subject: arm64: dts: renesas: white-hawk: Add I2C0 and EEPROMs Enable the I2C0 bus on the White Hawk CPU board, and describe the I2C EEPROMs present on the White Hawk CPU and BreakOut boards. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/d01cada6f2d3e44dd6cb26cfa8e4ce6382f1fbff.1662715538.git.geert+renesas@glider.be --- .../boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 20 ++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts | 9 +++++++++ 2 files changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index ba8cc162076c..27daba944a33 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -40,6 +40,21 @@ status = "okay"; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; @@ -49,6 +64,11 @@ function = "hscif0"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + scif_clk_pins: scif_clk { groups = "scif_clk"; function = "scif_clk"; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index bc0ac109b17c..afa807e4f704 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -20,3 +20,12 @@ stdout-path = "serial0:921600n8"; }; }; + +&i2c0 { + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; +}; -- cgit From 78c84f468084e844e03ffb13da09ce7decd1659c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:54 +0200 Subject: arm64: dts: renesas: white-hawk: Add CSI/DSI sub-board Add a DTS file for the R-Car V4H White Hawk CSI/DSI sub-board (RTP8A779G0ASKB0SC0SA000), and include it from the main r8a779g0-white-hawk.dts. For now its contents are limited to the Board ID EEPROM. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/265f7782743c539c57906e8207785f8b0d80d5d0.1662715538.git.geert+renesas@glider.be --- .../boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi | 15 +++++++++++++++ arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts | 1 + 2 files changed, 16 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi new file mode 100644 index 000000000000..ae7522b60e5d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board + * + * Copyright (C) 2022 Glider bv + */ + +&i2c0 { + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "csi-dsi-sub-board-id"; + reg = <0x52>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index afa807e4f704..07b0675ef6b8 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a779g0-white-hawk-cpu.dtsi" +#include "r8a779g0-white-hawk-csi-dsi.dtsi" / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; -- cgit From 9c1277a25fe538595ddc27d214f2cd64c306fdf5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:55 +0200 Subject: arm64: dts: renesas: white-hawk: Add Ethernet sub-board Add a DTS file for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1) sub-board (RTP8A779G0ASKB0SE0SA000), and include it from the main r8a779g0-white-hawk.dts. For now its contents are limited to the Board ID EEPROM. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/991600919513dd05a9a7d9c170c6924baf14d1a2.1662715538.git.geert+renesas@glider.be --- .../boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts | 1 + 2 files changed, 17 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi new file mode 100644 index 000000000000..4f411f95c674 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1) + * sub-board + * + * Copyright (C) 2022 Glider bv + */ + +&i2c0 { + eeprom@53 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board-id"; + reg = <0x53>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index 07b0675ef6b8..e8be90903081 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a779g0-white-hawk-cpu.dtsi" #include "r8a779g0-white-hawk-csi-dsi.dtsi" +#include "r8a779g0-white-hawk-ethernet.dtsi" / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; -- cgit From 120c7a58388f499b4d165c002fd645fbf501735c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:56 +0200 Subject: arm64: dts: renesas: r8a779g0: Add GPIO nodes Add device nodes for the General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/81176a5e12a5828cdcdd4b107d0b2e5970232c31.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 135 ++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 475b428ea734..e5f3973b71f7 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -79,6 +79,141 @@ <0 0xe6068000 0 0x16c>; }; + gpio0: gpio@e6050180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@e6050980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050980 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 32 29>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@e6058180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6058180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 64 20>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@e6058980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6058980 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 30>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@e6060180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6060180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 128 25>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@e6060980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6060980 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 160 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@e6061180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6061180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 192 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@e6061980 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6061980 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 224 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio@e6068180 { + compatible = "renesas,gpio-r8a779g0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6068180 0 0x54>; + interrupts = ; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 256 14>; + interrupt-controller; + #interrupt-cells = <2>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779g0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; -- cgit From 60dc0e87fb450da93bce6324e31f5326b04d4185 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:57 +0200 Subject: arm64: dts: renesas: white-hawk-cpu: Add GP LEDs Describe the three General Purpose LEDs on the White Hawk CPU board, so they can be used as indicator LEDs. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/007acd941ef925057f1f9b925ed4e339dbd29a74.1662715538.git.geert+renesas@glider.be --- .../boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index 27daba944a33..684c250d3c73 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -7,10 +7,38 @@ #include "r8a779g0.dtsi" +#include +#include + / { model = "Renesas White Hawk CPU board"; compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ -- cgit From 6672f84001dc7c79253e0de891a2bd72e1ae1acc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:58 +0200 Subject: arm64: dts: renesas: white-hawk-cpu: Add push switches Describe the three Push Switches on the White Hawk CPU board, so they can be used for user input. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/e18d0d5087a514db611295f5d1e13c950cf7dae7.1662715538.git.geert+renesas@glider.be --- .../boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index 684c250d3c73..f2ad18912f83 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -8,12 +8,44 @@ #include "r8a779g0.dtsi" #include +#include #include / { model = "Renesas White Hawk CPU board"; compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; @@ -97,6 +129,11 @@ function = "i2c0"; }; + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + scif_clk_pins: scif_clk { groups = "scif_clk"; function = "scif_clk"; -- cgit From 848c82db56923a8b0b0218da55e3478df4908186 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:53:59 +0200 Subject: arm64: dts: renesas: r8a779g0: Add RAVB nodes Add device nodes for the Renesas Ethernet AVB (EtherAVB-IF) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/980e7a62d8dc3a1e2387a2d93a6296625b105506.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 141 ++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index e5f3973b71f7..d70f0600ae5a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -334,6 +334,147 @@ status = "disabled"; }; + avb0: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a779g0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6800000 0 0x800>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15", "ch16", "ch17", + "ch18", "ch19", "ch20", "ch21", + "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 211>; + clock-names = "fck"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 211>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb1: ethernet@e6810000 { + compatible = "renesas,etheravb-r8a779g0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6810000 0 0x800>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15", "ch16", "ch17", + "ch18", "ch19", "ch20", "ch21", + "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 212>; + clock-names = "fck"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 212>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb2: ethernet@e6820000 { + compatible = "renesas,etheravb-r8a779g0", + "renesas,etheravb-rcar-gen4"; + reg = <0 0xe6820000 0 0x1000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15", "ch16", "ch17", + "ch18", "ch19", "ch20", "ch21", + "ch22", "ch23", "ch24"; + clocks = <&cpg CPG_MOD 213>; + clock-names = "fck"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 213>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; -- cgit From 7bb9e424357b707ff5a58c99ae10f37a3cf5dbbd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:54:00 +0200 Subject: arm64: dts: renesas: white-hawk: Move aliases and chosen The serial console port on White Hawk is located on the CPU board. Hence move the aliases and chosen nodes containing serial console configuration from the main White Hawk DTS file to the DTS file that describes the CPU board. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/b03b74f4b5ee3c3e828e753beb334ec43162c132.1662715538.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 8 ++++++++ arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index f2ad18912f83..e382b2d5c8d4 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -15,6 +15,14 @@ model = "Renesas White Hawk CPU board"; compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; + aliases { + serial0 = &hscif0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + keys { compatible = "gpio-keys"; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index e8be90903081..04a2b6b83e74 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -13,14 +13,6 @@ / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; - - aliases { - serial0 = &hscif0; - }; - - chosen { - stdout-path = "serial0:921600n8"; - }; }; &i2c0 { -- cgit From 96f7071d2b757b58e67592ea8d81f226b085feed Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 9 Sep 2022 11:54:01 +0200 Subject: arm64: dts: renesas: white-hawk-cpu: Add Ethernet support Describe the wiring of the first Ethernet AVB instance to the Micrel KSZ9031RNXVB PHY. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/50a31bc8267ab4c90bff27ef3aca1169f8ebc7ae.1662715538.git.geert+renesas@glider.be --- .../boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index e382b2d5c8d4..77f0130a2f85 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -16,6 +16,7 @@ compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; aliases { + ethernet0 = &avb0; serial0 = &hscif0; }; @@ -96,6 +97,24 @@ }; }; +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio7>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -127,6 +146,24 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; hscif0_pins: hscif0 { groups = "hscif0_data"; function = "hscif0"; -- cgit From 5c2b5a284960e2c90325131627413c67423f41ad Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Sep 2022 17:01:29 +0200 Subject: arm64: dts: renesas: spider: Move aliases and chosen The serial console and serial debug ports on Spider are located on the CPU board. Hence move the aliases and chosen nodes containing serial port configuration from the main Spider DTS file to the DTS file that describes the CPU board. Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/c03500bb10eae10caeb3f4f97bc979eeee6cce75.1663167551.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 9 +++++++++ arch/arm64/boot/dts/renesas/r8a779f0-spider.dts | 9 --------- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 4a876d47f59b..d4e087d1159c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -11,6 +11,15 @@ model = "Renesas Spider CPU board"; compatible = "renesas,spider-cpu", "renesas,r8a779f0"; + aliases { + serial0 = &scif3; + serial1 = &scif0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts index 7a7c8ffba711..7aac3f4d319c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts @@ -12,15 +12,6 @@ / { model = "Renesas Spider CPU and Breakout boards based on r8a779f0"; compatible = "renesas,spider-breakout", "renesas,spider-cpu", "renesas,r8a779f0"; - - aliases { - serial0 = &scif3; - serial1 = &scif0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &i2c4 { -- cgit From 567934a8c3cc8a53bb1ebbbc28ffcedf88f0a864 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 13 Sep 2022 02:06:55 +0000 Subject: arm64: dts: renesas: spider-cpu: Add missing bootargs This patch adds missing bootargs for R-Car S4 Spider board. One note is that current Spider board doesn't have Ethernet support yet, but this patch adds standard settings for it, too. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87leqo58ox.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index d4e087d1159c..a45df1041705 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -17,6 +17,7 @@ }; chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; -- cgit From f4b7dffdc8bdaed2546491c50db6f98286f32738 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 13 Sep 2022 02:07:13 +0000 Subject: arm64: dts: renesas: white-hawk-cpu: Add missing bootargs This patch adds missing bootargs for R-Car V4H White Hawk board. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87k06858oe.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index 77f0130a2f85..895f0bd9f754 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -21,6 +21,7 @@ }; chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:921600n8"; }; -- cgit From 167720e4bcc83bfc72c717abdfd5d5cd4dc80b61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Sep 2022 16:15:14 +0200 Subject: arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence update the compatible properties in various device nodes to include family-specific compatible values for R-Car Gen4 instead of R-Car Gen3: - CMT, - SDHI. Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/f14fde21270bf8269a61a75fc6e50af2765f2a42.1663164707.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 8539013f5870..ed9400f903c9 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -247,7 +247,7 @@ cmt0: timer@e60f0000 { compatible = "renesas,r8a779a0-cmt0", - "renesas,rcar-gen3-cmt0"; + "renesas,rcar-gen4-cmt0"; reg = <0 0xe60f0000 0 0x1004>; interrupts = , ; @@ -260,7 +260,7 @@ cmt1: timer@e6130000 { compatible = "renesas,r8a779a0-cmt1", - "renesas,rcar-gen3-cmt1"; + "renesas,rcar-gen4-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = , , @@ -279,7 +279,7 @@ cmt2: timer@e6140000 { compatible = "renesas,r8a779a0-cmt1", - "renesas,rcar-gen3-cmt1"; + "renesas,rcar-gen4-cmt1"; reg = <0 0xe6140000 0 0x1004>; interrupts = , , @@ -298,7 +298,7 @@ cmt3: timer@e6148000 { compatible = "renesas,r8a779a0-cmt1", - "renesas,rcar-gen3-cmt1"; + "renesas,rcar-gen4-cmt1"; reg = <0 0xe6148000 0 0x1004>; interrupts = , , @@ -2065,7 +2065,7 @@ mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a779a0", - "renesas,rcar-gen3-sdhi"; + "renesas,rcar-gen4-sdhi"; reg = <0 0xee140000 0 0x2000>; interrupts = ; clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779A0_CLK_SD0H>; -- cgit From 422797652877f55e7dccb8362fdd2ce399489cdc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Sep 2022 16:21:54 +0200 Subject: ARM: dts: renesas: Fix USB PHY device and child node names make dtbs_check: usb-phy@e6590100: '#phy-cells' is a required property From schema: dtschema/schemas/phy/phy-provider.yaml The R-Car Gen2 USB PHY device nodes do not represent USB PHYs theirselves, and thus do not have "#phy-cells" properties. Fix the warning by renaming them from "usb-phy" to "usb-phy-controller". Rename their child nodes from "usb-channel" to "usb-phy", as these do represent USB PHYs. Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/6442b4042e26537abc8632c4772f8201685f1f1f.1663165098.git.geert+renesas@glider.be --- arch/arm/boot/dts/r8a7742.dtsi | 6 +++--- arch/arm/boot/dts/r8a7743.dtsi | 6 +++--- arch/arm/boot/dts/r8a7744.dtsi | 6 +++--- arch/arm/boot/dts/r8a7745.dtsi | 6 +++--- arch/arm/boot/dts/r8a77470.dtsi | 8 ++++---- arch/arm/boot/dts/r8a7790.dtsi | 6 +++--- arch/arm/boot/dts/r8a7791.dtsi | 6 +++--- arch/arm/boot/dts/r8a7794.dtsi | 6 +++--- 8 files changed, 25 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 420e0b3259d4..758a1bf02fae 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -633,7 +633,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7742", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -645,11 +645,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index c0c145a5fe8d..20f1d98a048d 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -584,7 +584,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7743", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -596,11 +596,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 3f4fb53dd6df..96b2d5a4e8f6 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -584,7 +584,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7744", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -596,11 +596,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index fe8e98a66d93..afc902e532d8 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -525,7 +525,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7745", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -537,11 +537,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index c90f2a270214..a5cf663a0118 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -357,7 +357,7 @@ status = "disabled"; }; - usbphy0: usb-phy@e6590100 { + usbphy0: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a77470", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -369,7 +369,7 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; @@ -393,7 +393,7 @@ status = "disabled"; }; - usbphy1: usb-phy@e6598100 { + usbphy1: usb-phy-controller@e6598100 { compatible = "renesas,usb-phy-r8a77470", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6598100 0 0x100>; @@ -405,7 +405,7 @@ resets = <&cpg 706>; status = "disabled"; - usb1: usb-channel@0 { + usb1: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index a640488d513b..db171e3c62f2 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -654,7 +654,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -666,11 +666,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 542ed0a71872..d8f91d9f42ae 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -608,7 +608,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7791", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -620,11 +620,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index b601ee6f7580..7aa781ff3bff 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -506,7 +506,7 @@ status = "disabled"; }; - usbphy: usb-phy@e6590100 { + usbphy: usb-phy-controller@e6590100 { compatible = "renesas,usb-phy-r8a7794", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; @@ -518,11 +518,11 @@ resets = <&cpg 704>; status = "disabled"; - usb0: usb-channel@0 { + usb0: usb-phy@0 { reg = <0>; #phy-cells = <1>; }; - usb2: usb-channel@2 { + usb2: usb-phy@2 { reg = <2>; #phy-cells = <1>; }; -- cgit From 1ca318459c026eaaf7984edcf6e79eaf0aaea185 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 14 Sep 2022 14:42:11 +0100 Subject: arm64: dts: renesas: rzg2ul-smarc-som: Drop enabling wdt2 WDT CH2 is specifically to check the operation of Cortex-M33 CPU so don't enable WDT2 by default. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220914134211.199631-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi index cf3b3d118ef1..2a0feb53f0dc 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -263,8 +263,3 @@ status = "okay"; timeout-sec = <60>; }; - -&wdt2 { - status = "okay"; - timeout-sec = <60>; -}; -- cgit From 53072ba67e534ddd208697d3465004738f1d4d61 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Thu, 15 Sep 2022 17:52:55 +0100 Subject: arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS Move including the rzg2ul-smarc-som.dtsi from the carrier board rzg2ul-smarc.dtsi to the actual RZ/G2UL SMARC EVK board dts r9a07g043u11-smarc.dts. Also move the SW_SW0_DEV_SEL and SW_ET0_EN_N macros to board dts as they are used by SoM and carrier board DTS/I. This is in preparation of re-using the SoM and carrier board DTSIs for RZ/Five SMARC EVK. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220915165256.352843-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts | 12 ++++++++++++ arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi | 11 ----------- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts index 121e55282d18..059885a01ede 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts @@ -6,7 +6,19 @@ */ /dts-v1/; + +/* + * DIP-Switch SW1 setting + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) + * Please change below macros according to SW1 setting on the SoM + */ +#define SW_SW0_DEV_SEL 1 +#define SW_ET0_EN_N 1 + #include "r9a07g043.dtsi" +#include "rzg2ul-smarc-som.dtsi" #include "rzg2ul-smarc.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi index f9835c12023e..2a1331ed1a5c 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi @@ -5,17 +5,6 @@ * Copyright (C) 2022 Renesas Electronics Corp. */ -/* - * DIP-Switch SW1 setting - * 1 : High; 0: Low - * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) - * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) - * Please change below macros according to SW1 setting - */ -#define SW_SW0_DEV_SEL 1 -#define SW_ET0_EN_N 1 - -#include "rzg2ul-smarc-som.dtsi" #include "rzg2ul-smarc-pinfunction.dtsi" #include "rz-smarc-common.dtsi" -- cgit From 4ebf297b93403897668ee003427a9b780023c298 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 16 Sep 2022 11:02:51 +0100 Subject: arm64: dts: renesas: Adjust whitespace around '{' Drop extra space around the '{' sign. No functional changes (same DTB). Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20220916100251.20329-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 2 +- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 2 +- arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index ff6aab388eb7..689aa4ba416b 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -619,7 +619,7 @@ interrupts = ; }; - sdhi0: mmc@11c00000 { + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g043", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 35e7255471b8..2283d4fb8736 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -778,7 +778,7 @@ interrupts = ; }; - sdhi0: mmc@11c00000 { + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g044", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index d27b6c388580..358d4c34465f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -784,7 +784,7 @@ interrupts = ; }; - sdhi0: mmc@11c00000 { + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a07g054", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; -- cgit From 0d0a0b4413460383331088b2203ba09a6971bc3a Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Mon, 19 Sep 2022 13:57:23 -0700 Subject: arm64: dts: ti: k3-j7200: fix main pinmux range Range size of 0x2b4 was incorrect since there isn't 173 configurable pins for muxing. Additionally there is a non-addressable region in the mapping which requires splitting into two ranges. main_pmx0 -> 67 pins main_pmx1 -> 3 pins Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC") Signed-off-by: Matt Ranostay Signed-off-by: Vignesh Raghavendra Tested-by: Vaishnav Achath Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com --- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 10 ++++++---- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 11 ++++++++++- 2 files changed, 16 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 121975dc8239..7e8552fd2b6a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -134,15 +134,17 @@ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ + J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; }; +}; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { +&main_pmx1 { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ + J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index cf657ac0bd6a..80a57916bcb3 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -295,7 +295,16 @@ main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x11c000 0x00 0x2b4>; + reg = <0x00 0x11c000 0x00 0x10c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx1: pinctrl@11c11c { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c11c 0x00 0xc>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; -- cgit From d99efdaba9027bf70a4f78f42c0ddc0639e0918d Mon Sep 17 00:00:00 2001 From: Nicolas Frattaroli Date: Tue, 20 Sep 2022 16:34:46 +0200 Subject: arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b This enables the GPU and HDMI output (including HDMI audio) on the PINE64 Quartz64 Model B single board computer. Signed-off-by: Nicolas Frattaroli Link: https://lore.kernel.org/r/20220920143446.633956-1-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 1f709e5d8a87..c3f38ecd1d3d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -4,6 +4,7 @@ #include #include +#include #include "rk3566.dtsi" / { @@ -28,6 +29,17 @@ #clock-cells = <0>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -183,6 +195,33 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -456,6 +495,10 @@ status = "disabled"; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx @@ -677,3 +720,20 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; -- cgit From e18d9b093006d8abd53e1ce13c0d5a8d0fcd5f64 Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Mon, 19 Sep 2022 11:46:16 -0500 Subject: arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x This adds the DSI controller nodes and DSI-DPHY controller nodes to the rk356x device tree. Signed-off-by: Chris Morgan Acked-by: Michael Riesch Link: https://lore.kernel.org/r/20220919164616.12492-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 80 ++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index fd903e697aa2..164708f1eb67 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -739,6 +739,62 @@ status = "disabled"; }; + dsi0: dsi@fe060000 { + compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x00 0xfe060000 0x00 0x10000>; + interrupts = ; + clock-names = "pclk", "hclk"; + clocks = <&cru PCLK_DSITX_0>, <&cru HCLK_VO>; + phy-names = "dphy"; + phys = <&dsi_dphy0>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_DSITX_0>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi0_in: port@0 { + reg = <0>; + }; + + dsi0_out: port@1 { + reg = <1>; + }; + }; + }; + + dsi1: dsi@fe070000 { + compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xfe070000 0x0 0x10000>; + interrupts = ; + clock-names = "pclk", "hclk"; + clocks = <&cru PCLK_DSITX_1>, <&cru HCLK_VO>; + phy-names = "dphy"; + phys = <&dsi_dphy1>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_DSITX_1>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi1_in: port@0 { + reg = <0>; + }; + + dsi1_out: port@1 { + reg = <1>; + }; + }; + }; + hdmi: hdmi@fe0a0000 { compatible = "rockchip,rk3568-dw-hdmi"; reg = <0x0 0xfe0a0000 0x0 0x20000>; @@ -1646,6 +1702,30 @@ status = "disabled"; }; + dsi_dphy0: mipi-dphy@fe850000 { + compatible = "rockchip,rk3568-dsi-dphy"; + reg = <0x0 0xfe850000 0x0 0x10000>; + clock-names = "ref", "pclk"; + clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>; + #phy-cells = <0>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_MIPIDSIPHY0>; + status = "disabled"; + }; + + dsi_dphy1: mipi-dphy@fe860000 { + compatible = "rockchip,rk3568-dsi-dphy"; + reg = <0x0 0xfe860000 0x0 0x10000>; + clock-names = "ref", "pclk"; + clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>; + #phy-cells = <0>; + power-domains = <&power RK3568_PD_VO>; + reset-names = "apb"; + resets = <&cru SRST_P_MIPIDSIPHY1>; + status = "disabled"; + }; + usb2phy0: usb2phy@fe8a0000 { compatible = "rockchip,rk3568-usb2phy"; reg = <0x0 0xfe8a0000 0x0 0x10000>; -- cgit From 110a1f0eea148a4c444e2327483e0e765d26704e Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Fri, 9 Sep 2022 19:50:01 +0000 Subject: arm64: dts: rockchip: connect vcca_1v8 to APIO5_VDD on rk3399-rock-4c-plus GPIO pins for LEDs on ROCK 4C+ are in APIO5 Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220909195006.127957-1-naoki@radxa.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 3f01772c66ad..d7051b5d4904 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -427,6 +427,7 @@ &io_domains { bt656-supply = <&vcc_3v0>; + audio-supply = <&vcca_1v8>; gpio1830-supply = <&vcc_3v0>; sdmmc-supply = <&vccio_sd>; status = "okay"; -- cgit From a088c855acb85ab52fdbffd9b3473f6c9a3f0b35 Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Fri, 9 Sep 2022 19:50:02 +0000 Subject: arm64: dts: rockchip: fix regulator structure on rk3399-rock-4c-plus fix regulator name. also, add vcc_3v3 and vdd_log. ref: https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4c_plus_v12_sch_220304.pdf Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220909195006.127957-2-naoki@radxa.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399-rock-4c-plus.dts | 83 ++++++++++++++-------- 1 file changed, 52 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index d7051b5d4904..c88a7512e296 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -61,6 +61,16 @@ }; }; + vcc_3v3: vcc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -94,13 +104,24 @@ vin-supply = <&vcc5v0_sys>; }; - vcc_lan: vcc3v3-phy-regulator { + vcc3v3_phy1: vcc3v3-phy1-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc_lan"; + regulator-name = "vcc3v3_phy1"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + vdd_log: vdd-log-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -136,7 +157,7 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; - phy-supply = <&vcc_lan>; + phy-supply = <&vcc3v3_phy1>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; @@ -186,20 +207,20 @@ vcc2-supply = <&vcc5v0_sys>; vcc3-supply = <&vcc5v0_sys>; vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_buck5>; - vcc6-supply = <&vcc_buck5>; + vcc5-supply = <&vcc_buck5_s3>; + vcc6-supply = <&vcc_buck5_s3>; vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc5v0_sys>; regulators { - vdd_log: DCDC_REG1 { + vdd_center: DCDC_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-initial-mode = <0x2>; - regulator-name = "vdd_log"; + regulator-name = "vdd_center"; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <900000>; @@ -242,59 +263,59 @@ }; }; - vcc_buck5: DCDC_REG5 { + vcc_buck5_s3: DCDC_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc_buck5"; + regulator-name = "vcc_buck5_s3"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; - vcca_0v9: LDO_REG1 { + vcc_0v9_s3: LDO_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; - regulator-name = "vcca_0v9"; + regulator-name = "vcc_0v9_s3"; regulator-state-mem { regulator-off-in-suspend; }; }; - vcc_1v8: LDO_REG2 { + vcc_1v8_s3: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; + regulator-name = "vcc_1v8_s3"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; - vcc0v9_soc: LDO_REG3 { + vcc_0v9_s0: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; - regulator-name = "vcc0v9_soc"; + regulator-name = "vcc_0v9_s0"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; - vcca_1v8: LDO_REG4 { + vcc_1v8_s0: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcca_1v8"; + regulator-name = "vcc_1v8_s0"; regulator-state-mem { regulator-off-in-suspend; }; @@ -311,34 +332,34 @@ }; }; - vcc_1v5: LDO_REG6 { + vcc_1v5_s0: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-name = "vcc_1v5"; + regulator-name = "vcc_1v5_s0"; regulator-state-mem { regulator-off-in-suspend; }; }; - vcc_3v0: LDO_REG7 { + vcc_3v0_s0: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_3v0"; + regulator-name = "vcc_3v0_s0"; regulator-state-mem { regulator-off-in-suspend; }; }; - vccio_sd: LDO_REG8 { + vcc_sdio_s0: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; + regulator-name = "vcc_sdio_s0"; regulator-state-mem { regulator-off-in-suspend; }; @@ -426,10 +447,10 @@ }; &io_domains { - bt656-supply = <&vcc_3v0>; - audio-supply = <&vcca_1v8>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vccio_sd>; + bt656-supply = <&vcc_3v0_s0>; + audio-supply = <&vcc_1v8_s0>; + gpio1830-supply = <&vcc_3v0_s0>; + sdmmc-supply = <&vcc_sdio_s0>; status = "okay"; }; @@ -513,13 +534,13 @@ }; &pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; + pmu1830-supply = <&vcc_3v0_s0>; status = "okay"; }; &saradc { status = "okay"; - vref-supply = <&vcc_1v8>; + vref-supply = <&vcc_1v8_s3>; }; &sdhci { @@ -566,7 +587,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vccio_sd>; + vqmmc-supply = <&vcc_sdio_s0>; status = "okay"; }; @@ -620,7 +641,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; + vddio-supply = <&vcc_1v8_s3>; }; }; -- cgit From b153f26d2c557ca49b5f98d256b3e44bc37244cd Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Fri, 9 Sep 2022 19:50:03 +0000 Subject: arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4c-plus sort nodes/properties alphabetically Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220909195006.127957-3-naoki@radxa.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399-rock-4c-plus.dts | 48 +++++++++++----------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index c88a7512e296..fdee9d7b2372 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -23,15 +23,6 @@ stdout-path = "serial2:1500000n8"; }; - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -61,6 +52,15 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc_3v3: vcc-3v3-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_3v3"; @@ -71,13 +71,14 @@ vin-supply = <&vcc3v3_sys>; }; - vcc5v0_sys: vcc5v0-sys-regulator { + vcc3v3_phy1: vcc3v3-phy1-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc3v3_phy1"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; }; vcc5v0_host1: vcc5v0-host-regulator { @@ -92,6 +93,15 @@ vin-supply = <&vcc5v0_host0_s0>; }; + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + vcc5v0_typec: vcc5v0-typec-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -104,16 +114,6 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_phy1: vcc3v3-phy1-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_phy1"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - vdd_log: vdd-log-regulator { compatible = "regulator-fixed"; regulator-name = "vdd_log"; @@ -447,8 +447,8 @@ }; &io_domains { - bt656-supply = <&vcc_3v0_s0>; audio-supply = <&vcc_1v8_s0>; + bt656-supply = <&vcc_3v0_s0>; gpio1830-supply = <&vcc_3v0_s0>; sdmmc-supply = <&vcc_sdio_s0>; status = "okay"; -- cgit From 69448624b770aa88a71536a16900dd3cc6002919 Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Fri, 9 Sep 2022 19:50:04 +0000 Subject: arm64: dts: rockchip: fix regulator name on rk3399-rock-4 fix regulator name ref: https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4_v13_sch_20181112.pdf Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220909195006.127957-4-naoki@radxa.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 25 +++++++++++----------- 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 6464a6729729..bb1dcf319b02 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -136,24 +136,25 @@ vin-supply = <&vcc5v0_sys>; }; - vcc5v0_typec: vcc5v0-typec-regulator { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; + regulator-name = "vbus_typec"; regulator-always-on; vin-supply = <&vcc5v0_sys>; }; - vcc_lan: vcc3v3-phy-regulator { + vcc3v3_lan: vcc3v3-lan-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc_lan"; + regulator-name = "vcc3v3_lan"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; }; vdd_log: vdd-log { @@ -200,7 +201,7 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; - phy-supply = <&vcc_lan>; + phy-supply = <&vcc3v3_lan>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; @@ -305,8 +306,8 @@ }; }; - vcc1v8_codec: LDO_REG1 { - regulator-name = "vcc1v8_codec"; + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -316,8 +317,8 @@ }; }; - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -374,8 +375,8 @@ }; }; - vcc0v9_hdmi: LDO_REG7 { - regulator-name = "vcc0v9_hdmi"; + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; @@ -517,7 +518,7 @@ status = "okay"; bt656-supply = <&vcc_3v0>; - audio-supply = <&vcc1v8_codec>; + audio-supply = <&vcca1v8_codec>; sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; }; -- cgit From 06c5b5690a578514b3fe8f11a47a3c37d3af3696 Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Fri, 9 Sep 2022 19:50:05 +0000 Subject: arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4 sort nodes/properties alphabetically Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220909195006.127957-5-naoki@radxa.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 124 ++++++++++----------- 1 file changed, 61 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index bb1dcf319b02..485277f7ed17 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -74,32 +74,33 @@ }; }; - vcc12v_dcin: dc-12v { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; + vin-supply = <&vcc5v0_sys>; }; - vcc5v0_sys: vcc-sys { + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; }; - vcc_0v9: vcc-0v9 { + vcc3v3_lan: vcc3v3-lan-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc_0v9"; + regulator-name = "vcc3v3_lan"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; vin-supply = <&vcc3v3_sys>; }; @@ -136,24 +137,23 @@ vin-supply = <&vcc5v0_sys>; }; - vbus_typec: vbus-typec-regulator { + vcc5v0_sys: vcc-sys { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vbus_typec"; + regulator-name = "vcc5v0_sys"; regulator-always-on; - vin-supply = <&vcc5v0_sys>; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; }; - vcc3v3_lan: vcc3v3-lan-regulator { + vcc_0v9: vcc-0v9 { compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lan"; + regulator-name = "vcc_0v9"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; vin-supply = <&vcc3v3_sys>; }; @@ -515,21 +515,10 @@ }; &io_domains { - status = "okay"; - - bt656-supply = <&vcc_3v0>; audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vcc_sdio>; + bt656-supply = <&vcc_3v0>; gpio1830-supply = <&vcc_3v0>; -}; - -&pmu_io_domains { - status = "okay"; - - pmu1830-supply = <&vcc_3v0>; -}; - -&pcie_phy { + sdmmc-supply = <&vcc_sdio>; status = "okay"; }; @@ -544,6 +533,10 @@ status = "okay"; }; +&pcie_phy { + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -581,6 +574,20 @@ }; }; + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + sdio0 { sdio0_bus4: sdio0-bus4 { rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, @@ -598,20 +605,6 @@ }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_pin: vsel1-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_pin: vsel2-pin { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - usb-typec { vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -635,6 +628,11 @@ }; }; +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + &pwm2 { status = "okay"; }; @@ -645,6 +643,14 @@ vref-supply = <&vcc_1v8>; }; +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + &sdio0 { #address-cells = <1>; #size-cells = <0>; @@ -672,14 +678,6 @@ status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - &spdif { spdif_p0: port { @@ -761,13 +759,13 @@ status = "okay"; }; -&usbdrd_dwc3_0 { +&usbdrd3_1 { status = "okay"; - dr_mode = "host"; }; -&usbdrd3_1 { +&usbdrd_dwc3_0 { status = "okay"; + dr_mode = "host"; }; &usbdrd_dwc3_1 { -- cgit From b6047ba2caaca41da8706c66c55f7b34e0714e21 Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Fri, 9 Sep 2022 19:50:06 +0000 Subject: arm64: dts: rockchip: add avdd-0v9-supply and avdd-1v8-supply on rk3399 rock 4c and pi4 this patch adds avdd-0v9-supply and avdd-1v8-supply to hdmi node for Radxa ROCK 4 series. Signed-off-by: FUKAUMI Naoki Link: https://lore.kernel.org/r/20220909195006.127957-6-naoki@radxa.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 2 ++ arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index fdee9d7b2372..f9884902f874 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -175,6 +175,8 @@ }; &hdmi { + avdd-0v9-supply = <&vcc_0v9_s0>; + avdd-1v8-supply = <&vcc_1v8_s0>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 485277f7ed17..645ced6617a6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -219,6 +219,8 @@ }; &hdmi { + avdd-0v9-supply = <&vcca0v9_hdmi>; + avdd-1v8-supply = <&vcca1v8_hdmi>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; -- cgit From 8cde9667137f2ca8def8aef518305a78e5f55279 Mon Sep 17 00:00:00 2001 From: Tommaso Merciai Date: Mon, 20 Jun 2022 18:13:18 +0200 Subject: arm64: dts: rockchip: set max drive-strength for cif_clkout_m0 on px30-evb Add max drive-strength for cif_clkout_m0. This fix the issue that sometimes camera ov5695 is not probed correctly. Tested on PX30_Mini_EVB_V11_20190507 Signed-off-by: Tommaso Merciai Link: https://lore.kernel.org/r/20220620161321.1898840-2-tommaso.merciai@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 848bc39cf86a..53930e28eadf 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -537,6 +537,13 @@ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + cif-m0 { + cif_clkout_m0: cif-clkout-m0 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none_12ma>; + }; + }; }; &pmu_io_domains { -- cgit From 921890cae252ed7b7e4d9f98f63515c25cc0aede Mon Sep 17 00:00:00 2001 From: Tommaso Merciai Date: Mon, 20 Jun 2022 18:13:19 +0200 Subject: arm64: dts: rockchip: add pinctrl for mipi-pdn pin on px30-evb Add right mux for mipi-pdn. Mux this pad as gpio2 14 Signed-off-by: Tommaso Merciai Link: https://lore.kernel.org/r/20220620161321.1898840-3-tommaso.merciai@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 53930e28eadf..0d05a1b098bc 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -450,8 +450,8 @@ dvdd-supply = <&vcc1v5_dvp>; dovdd-supply = <&vcc1v8_dvp>; pinctrl-names = "default"; - pinctrl-0 = <&cif_clkout_m0>; reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>; port { ucam_out: endpoint { @@ -544,6 +544,12 @@ <2 RK_PB3 1 &pcfg_pull_none_12ma>; }; }; + + mipi { + mipi_pdn: mipi-pdn { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { -- cgit From 19d4aaf640913c5a8f1b06c9ef46287c32635299 Mon Sep 17 00:00:00 2001 From: Tommaso Merciai Date: Mon, 20 Jun 2022 18:13:20 +0200 Subject: arm64: dts: rockchip: use pin constant for reset-gpios on px30-evb Use rk gpio naming convention into reset-gpios of ov5695 camera Signed-off-by: Tommaso Merciai Link: https://lore.kernel.org/r/20220620161321.1898840-4-tommaso.merciai@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 0d05a1b098bc..07008d84434c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -450,8 +450,8 @@ dvdd-supply = <&vcc1v5_dvp>; dovdd-supply = <&vcc1v8_dvp>; pinctrl-names = "default"; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>; + reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>; port { ucam_out: endpoint { -- cgit From 9d88bf08e46dc2d2975ef87877445a924a04a0a7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 19 Sep 2022 11:26:08 +0200 Subject: ARM: dts: integrator: Tag PCI host with device_type The DT parser is dependent on the PCI device being tagged as device_type = "pci" in order to parse memory ranges properly. Fix this up. Signed-off-by: Linus Walleij Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/integratorap.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 9b652cc27b14..c983435ed492 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -160,6 +160,7 @@ pci: pciv3@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; -- cgit From 72ef30aa100a8d0e2a249112d6bc99dfdd0f70b5 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 20 Sep 2022 15:26:45 +0200 Subject: ARM: mvebu: add audio I2S controller to Armada 38x Device Tree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit adds the description of the I2S controller to the Marvell Armada 38x SoC's Device Tree, as well as its pin configuration. Signed-off-by: Marcin Wojtas Reviewed-by: Nadav Haklai Tested-by: Nadav Haklai Tested-by: Lior Amsalem [pali: Fix i2s-pins name] Signed-off-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-38x.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index a40a70e70458..124aa007e9da 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -289,6 +289,13 @@ marvell,pins = "mpp44"; marvell,function = "sata3"; }; + + i2s_pins: i2s-pins { + marvell,pins = "mpp48", "mpp49", + "mpp50", "mpp51", + "mpp52", "mpp53"; + marvell,function = "audio"; + }; }; gpio0: gpio@18100 { @@ -620,6 +627,18 @@ status = "disabled"; }; + audio_controller: audio-controller@e8000 { + #sound-dai-cells = <1>; + compatible = "marvell,armada-380-audio"; + reg = <0xe8000 0x4000>, <0x18410 0xc>, + <0x18204 0x4>; + reg-names = "i2s_regs", "pll_regs", "soc_ctrl"; + interrupts = ; + clocks = <&gateclk 0>; + clock-names = "internal"; + status = "disabled"; + }; + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; -- cgit From 18960771a172843d360f90c8cd094a5f6b855716 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 20 Sep 2022 15:26:46 +0200 Subject: ARM: mvebu: add audio support to Armada 385 DB This commit adds the necessary Device Tree information to enable audio support on the Armada 385 DB platform. In details it: * Instantiates the CS42L51 audio codec on the I2C0 bus * Adds simple-card DT binding for audio on Armada 385 DB * Adds description for both analog I2S and S/PDIF I/O * Disabled by default Signed-off-by: Marcin Wojtas Signed-off-by: Nadav Haklai Tested-by: Star_Automation Tested-by: Lior Amsalem Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-388-db.dts | 69 +++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 5130eccc32af..2bcec5419b66 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -36,6 +36,11 @@ i2c@11000 { status = "okay"; clock-frequency = <100000>; + audio_codec: audio-codec@4a { + #sound-dai-cells = <0>; + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; }; i2c@11100 { @@ -99,6 +104,12 @@ no-1-8-v; }; + audio-controller@e8000 { + pinctrl-0 = <&i2s_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + usb3@f0000 { status = "okay"; }; @@ -128,6 +139,64 @@ }; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Armada 385 DB Audio"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Out Jack", + "Line", "In Jack"; + simple-audio-card,routing = + "Out Jack", "HPL", + "Out Jack", "HPR", + "AIN1L", "In Jack", + "AIN1R", "In Jack"; + status = "disabled"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 0>; + }; + + codec { + sound-dai = <&audio_codec>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_out>; + }; + }; + + simple-audio-card,dai-link@2 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_in>; + }; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; }; &spi0 { -- cgit From 424175c5b4b2dc59f95a6d608fe709cfcc41a0ce Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 20 Sep 2022 15:26:47 +0200 Subject: ARM: mvebu: Add spdif-pins mpp pins for Armada 38x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit S/PDIF function on Armada 38x uses only mpp51 pin. So add spdif-pins mpp pins section for it. It is needed for boards without i2s. Signed-off-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-38x.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 124aa007e9da..446861b6b17b 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -296,6 +296,11 @@ "mpp52", "mpp53"; marvell,function = "audio"; }; + + spdif_pins: spdif-pins { + marvell,pins = "mpp51"; + marvell,function = "audio"; + }; }; gpio0: gpio@18100 { -- cgit From ea31483565a1fff3bf8c41238fe0460ec691f224 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 20 Sep 2022 15:26:48 +0200 Subject: ARM: dts: turris-omnia: Define S/PDIF audio card MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Turris Omnia has GPIO51 exported on pin header U16, which works in S/PDIF output mode. So define S/PDIF audio output card for this pin. Signed-off-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index a41902e3815c..8fc98d51eb7e 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -105,6 +105,33 @@ */ status = "disabled"; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&audio_controller 1>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&audio_controller { + /* Pin header U16, GPIO51 in SPDIFO mode */ + pinctrl-0 = <&spdif_pins>; + pinctrl-names = "default"; + spdif-mode; + status = "okay"; }; &bm { -- cgit From 649acf24d8c86ab8861a05cdd6833100a5fe4e78 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Wed, 21 Sep 2022 13:50:37 +0200 Subject: ARM: dts: turris-omnia: Add label for wan port MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device tree label property should contain label from the box/stick. Labels for other ports are already specified in DT but wan is missing. So add missing label for wan port. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 8fc98d51eb7e..72ac807cae25 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -193,6 +193,7 @@ buffer-manager = <&bm>; bm,pool-long = <2>; bm,pool-short = <3>; + label = "wan"; }; &i2c0 { -- cgit From 36d96827f480e90037d162098061333e279ea35f Mon Sep 17 00:00:00 2001 From: Quan Nguyen Date: Wed, 17 Aug 2022 14:15:39 +0700 Subject: ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell hardware reference platform with AmpereOne(TM) processor. Signed-off-by: Quan Nguyen Signed-off-by: Phong Vo Signed-off-by: Thang Q. Nguyen Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 546 +++++++++++++++++++++ 2 files changed, 547 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..5d8c6ce49af9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1576,6 +1576,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ + aspeed-bmc-ampere-mtmitchell.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-asrock-romed8hm3.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts new file mode 100644 index 000000000000..606cd4be245a --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022, Ampere Computing LLC + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include + +/ { + model = "Ampere Mt.Mitchell BMC"; + compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + voltage_mon_reg: voltage-mon-regulator { + compatible = "regulator-fixed"; + regulator-name = "ltc2497_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + gpioI5mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>; + }; + + adc0mux: adc0mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc1mux: adc1mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc2mux: adc2mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc3mux: adc3mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc4mux: adc4mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc5mux: adc5mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc6mux: adc6mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc7mux: adc7mux { + compatible = "io-channel-mux"; + io-channels = <&adc0 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc8mux: adc8mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc9mux: adc9mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc10mux: adc10mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc11mux: adc11mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc12mux: adc12mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc13mux: adc13mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc14mux: adc14mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + adc15mux: adc15mux { + compatible = "io-channel-mux"; + io-channels = <&adc1 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioI5mux>; + channels = "s0", "s1"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0mux 0>, <&adc0mux 1>, + <&adc1mux 0>, <&adc1mux 1>, + <&adc2mux 0>, <&adc2mux 1>, + <&adc3mux 0>, <&adc3mux 1>, + <&adc4mux 0>, <&adc4mux 1>, + <&adc5mux 0>, <&adc5mux 1>, + <&adc6mux 0>, <&adc6mux 1>, + <&adc7mux 0>, <&adc7mux 1>, + <&adc8mux 0>, <&adc8mux 1>, + <&adc9mux 0>, <&adc9mux 1>, + <&adc10mux 0>, <&adc10mux 1>, + <&adc11mux 0>, <&adc11mux 1>, + <&adc12mux 0>, <&adc12mux 1>, + <&adc13mux 0>, <&adc13mux 1>, + <&adc14mux 0>, <&adc14mux 1>, + <&adc15mux 0>, <&adc15mux 1>, + <&adc_i2c 0>, <&adc_i2c 1>, + <&adc_i2c 2>, <&adc_i2c 3>, + <&adc_i2c 4>, <&adc_i2c 5>, + <&adc_i2c 6>, <&adc_i2c 7>, + <&adc_i2c 8>, <&adc_i2c 9>, + <&adc_i2c 10>, <&adc_i2c 11>, + <&adc_i2c 12>, <&adc_i2c 13>, + <&adc_i2c 14>, <&adc_i2c 15>; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <20000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + adc_i2c: adc@16 { + compatible = "lltc,ltc2497"; + reg = <0x16>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c4_bus70_chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + outlet_temp1: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + psu1_inlet_temp2: temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + }; + + i2c4_bus70_chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + pcie_zone_temp1: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + psu0_inlet_temp2: temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + }; + + i2c4_bus70_chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + pcie_zone_temp2: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + outlet_temp2: temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + }; + + i2c4_bus70_chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + mb_inlet_temp1: temperature-sensor@7c { + compatible = "microchip,emc1413"; + reg = <0x7c>; + }; + mb_inlet_temp2: temperature-sensor@4c { + compatible = "microchip,emc1413"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + }; +}; + +&i2c6 { + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + bmc_ast2600_cpu: temperature-sensor@35 { + compatible = "ti,tmp175"; + reg = <0x35>; + }; +}; + +&adc0 { + ref_voltage = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + ref_voltage = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n", + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","","", + /*C0-C7*/ "s0-vrd-fault-n","s1-vrd-fault-n","","", + "irq-n","","vrd-sel","spd-sel", + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", + "","bmc-ncsi-txen","","", + /*E0-E7*/ "","","clk50m-bmc-ncsi","","","","","", + /*F0-F7*/ "s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control", + "cpu-bios-recover","s0-heartbeat","hs-csout-prochot", + "s0-vr-hot-n","s1-vr-hot-n", + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","","","", + /*H0-H7*/ "","","wd-disable-n","power-chassis-good","","","","", + /*I0-I7*/ "","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","s0-ddr-save","soc-spi-nor-access","presence-cpu0", + "s0-rtc-lock","","","", + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", + "jtag-dbgr-prsnt-n","s1-heartbeat","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","", + "led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","identify-button","led-identify", + "s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", + "host0-reboot-ack-n","host0-ready","host0-shd-req-n", + "host0-shd-ack-n","s0-overtemp-n", + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", + /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", + "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", + "s1-overtemp-n","s1-spi-auth-fail-n", + /*Y0-Y7*/ "","","","","","","","host0-special-boot", + /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","","","s0-soc-pgood","", + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", + "uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","",""; +}; -- cgit From 2e72cc0b52fab07c967ba4435409a4135c0008b8 Mon Sep 17 00:00:00 2001 From: Quan Nguyen Date: Thu, 15 Sep 2022 15:08:28 +0700 Subject: ARM: dts: aspeed: mtjade: Remove gpio-keys entries Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device tree. The user space applications are going to change from using libevdev to libgpiod. Signed-off-by: Quan Nguyen Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 95 -------------------------- 1 file changed, 95 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 82a6f14a45f0..d127cbcc7998 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -97,101 +97,6 @@ }; }; - gpio-keys { - compatible = "gpio-keys"; - - event-shutdown-ack { - label = "SHUTDOWN_ACK"; - gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-reboot-ack { - label = "REBOOT_ACK"; - gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s0-overtemp { - label = "S0_OVERTEMP"; - gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s0-hightemp { - label = "S0_HIGHTEMP"; - gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s0-cpu-fault { - label = "S0_CPU_FAULT"; - gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - event-s0-scp-auth-fail { - label = "S0_SCP_AUTH_FAIL"; - gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s1-scp-auth-fail { - label = "S1_SCP_AUTH_FAIL"; - gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s1-overtemp { - label = "S1_OVERTEMP"; - gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s1-hightemp { - label = "S1_HIGHTEMP"; - gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-s1-cpu-fault { - label = "S1_CPU_FAULT"; - gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - event-id { - label = "ID_BUTTON"; - gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-psu1-vin-good { - label = "PSU1_VIN_GOOD"; - gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-psu2-vin-good { - label = "PSU2_VIN_GOOD"; - gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-psu1-present { - label = "PSU1_PRESENT"; - gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-psu2-present { - label = "PSU2_PRESENT"; - gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - }; - gpioA0mux: mux-controller { compatible = "gpio-mux"; #mux-control-cells = <0>; -- cgit From d61e4defc907ac070876d1e904b603393e7cb195 Mon Sep 17 00:00:00 2001 From: Karthikeyan Pasupathi Date: Mon, 26 Sep 2022 18:13:13 +0530 Subject: ARM: dts: aspeed: Yosemite V2: Enable OCP debug card Added IPMB-13 channel for Debug Card communication which improves the readability of the machine and makes it easier to debug the server and it will display some pieces of information about the server like "system info", "Critical sensors" and "critical sel". Signed-off-by: Karthikeyan Pasupathi Reviewed-by: Patrick Williams Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495 Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts index 8864e9c312a8..84236df522dc 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts @@ -215,6 +215,17 @@ }; }; +&i2c13 { + status = "okay"; + // Debug Card + multi-master; + ipmb13@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + &pwm_tacho { status = "okay"; //FSC -- cgit From 3293fca4a689dae1090b997145a46c816ff03a4a Mon Sep 17 00:00:00 2001 From: Konstantin Aladyshev Date: Thu, 22 Sep 2022 00:09:47 +0300 Subject: ARM: dts: aspeed: Add AMD DaytonaX BMC Add initial version of device tree for the BMC in the AMD DaytonaX platform. AMD DaytonaX platform is a customer reference board (CRB) with an Aspeed ast2500 BMC manufactured by AMD. Signed-off-by: Konstantin Aladyshev Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts | 319 ++++++++++++++++++++++++++ 2 files changed, 320 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5d8c6ce49af9..aaf2df73d50e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1574,6 +1574,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb-a1.dtb \ aspeed-ast2600-evb.dtb \ + aspeed-bmc-amd-daytonax.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ aspeed-bmc-ampere-mtmitchell.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts new file mode 100644 index 000000000000..64bb9bf92de2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include +#include + +/ { + model = "AMD DaytonaX BMC"; + compatible = "amd,daytonax-bmc", "aspeed,ast2500"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led-fault { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + led-identify { + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>, + <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + #include "openbmc-flash-layout.dtsi" + }; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&uart1 { + //Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + //BMC Console + status = "okay"; +}; + +&vuart { + status = "okay"; + aspeed,lpc-io-reg = <0x3f8>; + aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","led-fault","led-identify","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "id-button","","","","","","","", + /*D0-D7*/ "","","ASSERT_BMC_READY","","","","","", + /*E0-E7*/ "reset-button","reset-control","power-button","power-control","", + "power-good","power-ok","", + /*F0-F7*/ "","","","","","","BATTERY_DETECT","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "FM_BMC_READ_SPD_TEMP","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>, <0x81>; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@14 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@15 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&vhub { + status = "okay"; +}; -- cgit From 3d50a89cb28b5e1c76c1ec3e155f2327ad1ede91 Mon Sep 17 00:00:00 2001 From: Karthikeyan Pasupathi Date: Wed, 14 Sep 2022 17:23:07 +0530 Subject: ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver Removed NIC EEPROM driver IPMB-12 channel and enabled it as generic i2c EEPROM. Signed-off-by: Karthikeyan Pasupathi Link: https://lore.kernel.org/r/20220914115307.GA339@hcl-ThinkPad-T495 Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts index 84236df522dc..6bf2ff85a40e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts @@ -207,12 +207,6 @@ &i2c12 { status = "okay"; - //MEZZ_FRU - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - pagesize = <32>; - }; }; &i2c13 { -- cgit From e360b84c3366d02784972086bed8cf60bce64f3b Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Fri, 5 Aug 2022 17:09:57 +0800 Subject: ARM: dts: aspeed-g6: Enable more UART controllers Setup the configuration of UART6, UART7, UART8, and UART9 in aspeed-g6.dtsi. Signed-off-by: Ken Chen Link: https://lore.kernel.org/r/20220805090957.470434-1-j220584470k@gmail.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-g6.dtsi | 56 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 6660564855ff..1387a763a6a5 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -756,6 +756,62 @@ status = "disabled"; }; + uart6: serial@1e790000 { + compatible = "ns16550a"; + reg = <0x1e790000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6_default>; + + status = "disabled"; + }; + + uart7: serial@1e790100 { + compatible = "ns16550a"; + reg = <0x1e790100 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7_default>; + + status = "disabled"; + }; + + uart8: serial@1e790200 { + compatible = "ns16550a"; + reg = <0x1e790200 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8_default>; + + status = "disabled"; + }; + + uart9: serial@1e790300 { + compatible = "ns16550a"; + reg = <0x1e790300 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart9_default>; + + status = "disabled"; + }; + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit From da41645f11bb58eae3dda87dc459495a094f1935 Mon Sep 17 00:00:00 2001 From: Cédric Le Goater Date: Fri, 3 Jun 2022 09:37:05 +0200 Subject: ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that the pinctrl definitions of the ast2600 SoC have been fixed, see commit 925fbe1f7eb6 ("dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group"), it is safe to activate QSPI on the ast2600 evb. Cc: Chin-Ting Kuo Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater Link: https://lore.kernel.org/r/20220603073705.1624351-1-clg@kaod.org Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 14dbeaee7ee3..5c6eacb43c03 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -182,6 +182,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; #include "openbmc-flash-layout-64.dtsi" }; @@ -196,6 +197,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-rx-bus-width = <4>; spi-max-frequency = <100000000>; }; }; -- cgit From d916109169159f9319f45ce7e1339e41eccf22c4 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 27 Sep 2022 17:36:39 +0930 Subject: ARM: dts: aspeed: ast2600evb: Fix compatible string The AST2600 EVB is not an A1. Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 5c6eacb43c03..de83c0eb1d6e 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -8,7 +8,7 @@ / { model = "AST2600 EVB"; - compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb", "aspeed,ast2600"; aliases { serial4 = &uart5; -- cgit From 73b4476562de2a26debc076801ca28148076c79f Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Tue, 27 Sep 2022 17:37:11 +0930 Subject: ARM: dts: aspeed: ast2600-evb-a1: Add compatible The AST2600 EVB A1 is an AST2600 EVB. Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts index d0a5c2ff0fec..f34a2b1ec2f0 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts @@ -5,7 +5,7 @@ / { model = "AST2600 A1 EVB"; - compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600"; /delete-node/regulator-vcc-sdhci0; /delete-node/regulator-vcc-sdhci1; -- cgit From 3ba2d4bb9592bf7a6a3fe3dbe711ecfc3d004bab Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 26 Sep 2022 12:43:53 +0200 Subject: ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family According to s5k6a3 driver code, the reset line for the chip appears to be active low. This also matches the typical polarity of reset lines in general. Let's fix it up as having correct polarity in DTS is important when the driver will be switched over to gpiod API. Fixes: b4fec64758ab ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board") Signed-off-by: Dmitry Torokhov Signed-off-by: Krzysztof Kozlowski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index b967397a46c5..8e1c19a8ad06 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -586,7 +586,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { is_s5k6a3_ep: endpoint { -- cgit From 2681eed29b9e7683c0e944b2f2221afd39de05e3 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:41 +0900 Subject: ARM: dts: uniphier: Rename pvtctl node to thermal-sensor The pvtctl node belongs to thermal-sensor, so the node name should be renamed to thermal-sensor. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-2-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 03301ddb3403..c6288c772a7d 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -564,7 +564,7 @@ #reset-cells = <1>; }; - pvtctl: pvtctl { + pvtctl: thermal-sensor { compatible = "socionext,uniphier-pxs2-thermal"; interrupts = <0 3 4>; #thermal-sensor-cells = <0>; -- cgit From 242c78ff62ff2c4bd629993cfde616d963b53eec Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:42 +0900 Subject: ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller Actual phy nodes are each child node. The parent node should be usb-controller node as a representation of the phy integration. This applies to the devicetree for Pro4 SoC. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-3-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pro4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index a53b73ee93e9..6140eb42c42a 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -376,7 +376,7 @@ compatible = "socionext,uniphier-pro4-pinctrl"; }; - usb-phy { + usb-controller { compatible = "socionext,uniphier-pro4-usb2-phy"; #address-cells = <1>; #size-cells = <0>; -- cgit From 7e115bdd4f64ea05209499fd2df609ca91ab1d13 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:43 +0900 Subject: ARM: dts: uniphier: Rename usb-glue node for USB3 to usb-controller This "usb-glue" stands for an external controller associated with USB core, however, this is not common. So rename to "usb-controller". Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-4-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pro4.dtsi | 4 ++-- arch/arm/boot/dts/uniphier-pro5.dtsi | 4 ++-- arch/arm/boot/dts/uniphier-pxs2.dtsi | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 6140eb42c42a..2232c67134a0 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -518,7 +518,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pro4-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -571,7 +571,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pro4-dwc3-glue", "simple-mfd"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 3525125832dd..afc225f3b4b8 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -480,7 +480,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pro5-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -544,7 +544,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pro5-dwc3-glue", "simple-mfd"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index c6288c772a7d..2602503e2275 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -609,7 +609,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pxs2-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -704,7 +704,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pxs2-dwc3-glue", "simple-mfd"; #address-cells = <1>; -- cgit From 888c701754a8af2cd9870e7dfbbf8bcc72915656 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:44 +0900 Subject: ARM: dts: uniphier: Rename gpio-hog node According to gpio-hog schema, should add the suffix "-hog" to the node names including gpio-hog to fix the following warning. uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-5-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-sld8-ref.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index c46c2e8a10a7..e2d25c9160bd 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -56,7 +56,7 @@ }; &gpio { - xirq1 { + xirq1-hog { gpio-hog; gpios = ; input; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 5bc7fe11b517..4f5e8848cecf 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -60,7 +60,7 @@ }; &gpio { - xirq4 { + xirq4-hog { gpio-hog; gpios = ; input; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 3b9b61314d01..cc2cae935b5d 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -59,7 +59,7 @@ }; &gpio { - xirq2 { + xirq2-hog { gpio-hog; gpios = ; input; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 6db949ec7411..b73647bafc63 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -56,7 +56,7 @@ }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = ; input; -- cgit From c9c50dfdf6e491c4e29e8d4cfeb2d129c085eeea Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:45 +0900 Subject: ARM: dts: uniphier: Use GIC interrupt definitions Use human-readable definitions for GIC interrupt type and flag, instead of hard-coding the numbers. No functional change. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-6-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 4 +-- arch/arm/boot/dts/uniphier-ld4.dtsi | 49 ++++++++++++++----------- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 4 +-- arch/arm/boot/dts/uniphier-pro4-ref.dts | 4 +-- arch/arm/boot/dts/uniphier-pro4.dtsi | 64 +++++++++++++++++++-------------- arch/arm/boot/dts/uniphier-pro5.dtsi | 50 ++++++++++++++------------ arch/arm/boot/dts/uniphier-pxs2.dtsi | 56 ++++++++++++++++------------- arch/arm/boot/dts/uniphier-sld8-ref.dts | 4 +-- arch/arm/boot/dts/uniphier-sld8.dtsi | 49 ++++++++++++++----------- 9 files changed, 163 insertions(+), 121 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index e2d25c9160bd..e007db084787 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -36,11 +36,11 @@ }; ðsc { - interrupts = <1 8>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <1 8>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index b52957ccda0d..9dceff12a633 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada #include +#include / { compatible = "socionext,uniphier-ld4"; @@ -55,7 +56,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = , + ; cache-unified; cache-size = <(512 * 1024)>; cache-sets = <256>; @@ -69,7 +71,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -80,7 +82,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -91,7 +93,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -102,7 +104,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -113,7 +115,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 29 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -140,7 +142,7 @@ reg = <0x58400000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -154,7 +156,7 @@ reg = <0x58480000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -168,7 +170,7 @@ reg = <0x58500000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -182,7 +184,7 @@ reg = <0x58580000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -240,8 +242,13 @@ dmac: dma-controller@5a000000 { compatible = "socionext,uniphier-mio-dmac"; reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>; + interrupts = , + , + , + , + , + , + ; clocks = <&mio_clk 7>; resets = <&mio_rst 7>; #dma-cells = <1>; @@ -251,7 +258,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -271,7 +278,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&mio_clk 1>; @@ -289,7 +296,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -303,7 +310,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -317,7 +324,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, @@ -358,14 +365,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; + interrupts = ; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; + interrupts = ; clocks = <&arm_timer_clk>; }; @@ -407,7 +416,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 4f5e8848cecf..223a78b4a761 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -40,11 +40,11 @@ }; ðsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index cc2cae935b5d..48f7f23bab91 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -39,11 +39,11 @@ }; ðsc { - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 2232c67134a0..8cb4e7043e60 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada #include +#include / { compatible = "socionext,uniphier-pro4"; @@ -63,7 +64,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = , + ; cache-unified; cache-size = <(768 * 1024)>; cache-sets = <256>; @@ -77,7 +79,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -88,7 +90,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -99,7 +101,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -110,7 +112,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -121,7 +123,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -148,7 +150,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -162,7 +164,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -176,7 +178,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -190,7 +192,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -206,7 +208,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = ; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -218,7 +220,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = ; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -274,8 +276,14 @@ dmac: dma-controller@5a000000 { compatible = "socionext,uniphier-mio-dmac"; reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + interrupts = , + , + , + , + , + , + , + ; clocks = <&mio_clk 7>; resets = <&mio_rst 7>; #dma-cells = <1>; @@ -285,7 +293,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -305,7 +313,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&mio_clk 1>; @@ -323,7 +331,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a600000 0x200>; - interrupts = <0 85 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; clocks = <&mio_clk 2>; @@ -339,7 +347,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -355,7 +363,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb3>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -431,7 +439,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = ; dma-channels = <16>; #dma-cells = <2>; }; @@ -446,14 +454,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x304>; + interrupts = ; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x304>; + interrupts = ; clocks = <&arm_timer_clk>; }; @@ -485,7 +495,7 @@ compatible = "socionext,uniphier-pro4-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "gio", "ether", "ether-gb", "ether-phy"; @@ -508,7 +518,8 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "host", "peripheral"; - interrupts = <0 134 4>, <0 135 4>; + interrupts = , + ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clock-names = "ref", "bus_early", "suspend"; @@ -561,7 +572,8 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "host", "peripheral"; - interrupts = <0 137 4>, <0 138 4>; + interrupts = , + ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clock-names = "ref", "bus_early", "suspend"; @@ -605,7 +617,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index afc225f3b4b8..33221d7130f1 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -5,6 +5,8 @@ // Copyright (C) 2015-2016 Socionext Inc. // Author: Masahiro Yamada +#include + / { compatible = "socionext,uniphier-pro5"; #address-cells = <1>; @@ -135,7 +137,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; - interrupts = <0 190 4>, <0 191 4>; + interrupts = , + ; cache-unified; cache-size = <(2 * 1024 * 1024)>; cache-sets = <512>; @@ -148,7 +151,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = , + ; cache-unified; cache-size = <(2 * 1024 * 1024)>; cache-sets = <512>; @@ -162,7 +166,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -175,7 +179,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 11>; /* common with spi0 */ @@ -186,7 +190,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -197,7 +201,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -208,7 +212,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -219,7 +223,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -246,7 +250,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -260,7 +264,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -274,7 +278,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -288,7 +292,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -304,7 +308,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = ; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -316,7 +320,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = ; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -415,7 +419,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = ; dma-channels = <16>; #dma-cells = <2>; }; @@ -430,14 +434,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x304>; + interrupts = ; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x304>; + interrupts = ; clocks = <&arm_timer_clk>; }; @@ -470,7 +476,7 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "host"; - interrupts = <0 134 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clock-names = "ref", "bus_early", "suspend"; @@ -534,7 +540,7 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "host"; - interrupts = <0 137 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -650,7 +656,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; @@ -663,7 +669,7 @@ compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68400000 0x800>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sd_clk 1>; @@ -679,7 +685,7 @@ compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68800000 0x800>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 2602503e2275..d2a2468d4ea0 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada #include +#include #include / { @@ -161,7 +162,10 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + interrupts = , + , + , + ; cache-unified; cache-size = <(1280 * 1024)>; cache-sets = <512>; @@ -175,7 +179,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -188,7 +192,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -199,7 +203,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -210,7 +214,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -221,7 +225,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -232,7 +236,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -259,7 +263,7 @@ audio@56000000 { compatible = "socionext,uniphier-pxs2-aio"; reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ain1>, <&pinctrl_ain2>, @@ -317,7 +321,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -331,7 +335,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -345,7 +349,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -359,7 +363,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -373,7 +377,7 @@ reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 45 4>; + interrupts = ; clocks = <&peri_clk 8>; resets = <&peri_rst 8>; clock-frequency = <400000>; @@ -385,7 +389,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = ; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -397,7 +401,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = ; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -454,7 +458,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a000000 0x800>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sd_clk 1>; @@ -470,7 +474,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -515,7 +519,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = ; dma-channels = <16>; #dma-cells = <2>; }; @@ -530,14 +534,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0xf04>; + interrupts = ; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0xf04>; + interrupts = ; clocks = <&arm_timer_clk>; }; @@ -566,7 +572,7 @@ pvtctl: thermal-sensor { compatible = "socionext,uniphier-pxs2-thermal"; - interrupts = <0 3 4>; + interrupts = ; #thermal-sensor-cells = <0>; socionext,tmod-calibration = <0x0f86 0x6844>; }; @@ -576,7 +582,7 @@ compatible = "socionext,uniphier-pxs2-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "ether"; @@ -598,7 +604,7 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 134 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -694,7 +700,7 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 137 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; @@ -780,7 +786,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index b73647bafc63..2446f9e15360 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -36,11 +36,11 @@ }; ðsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 96a766deb8d1..67b12dfe513b 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -6,6 +6,7 @@ // Author: Masahiro Yamada #include +#include / { compatible = "socionext,uniphier-sld8"; @@ -55,7 +56,8 @@ compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; + interrupts = , + ; cache-unified; cache-size = <(256 * 1024)>; cache-sets = <256>; @@ -69,7 +71,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -80,7 +82,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -91,7 +93,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -102,7 +104,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -113,7 +115,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 29 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -144,7 +146,7 @@ reg = <0x58400000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -158,7 +160,7 @@ reg = <0x58480000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -172,7 +174,7 @@ reg = <0x58500000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -186,7 +188,7 @@ reg = <0x58580000 0x40>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 1>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -244,8 +246,13 @@ dmac: dma-controller@5a000000 { compatible = "socionext,uniphier-mio-dmac"; reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>; + interrupts = , + , + , + , + , + , + ; clocks = <&mio_clk 7>; resets = <&mio_rst 7>; #dma-cells = <1>; @@ -255,7 +262,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -275,7 +282,7 @@ compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&mio_clk 1>; @@ -293,7 +300,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -307,7 +314,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -321,7 +328,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, @@ -362,14 +369,16 @@ timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; + interrupts = ; clocks = <&arm_timer_clk>; }; timer@60000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; + interrupts = ; clocks = <&arm_timer_clk>; }; @@ -411,7 +420,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; -- cgit From d5566de59bddde675e91fa912aaa928d7e9ee277 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:46 +0900 Subject: ARM: dts: uniphier: Add ahci controller nodes for Pro4 Add ahci controller, glue layer, and clock nodes for Pro4 SoC. The glue layer includes reset and phy, and the clock node is used for handling ahci clocks on SoC-glue. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-7-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pro4-ace.dts | 8 +++ arch/arm/boot/dts/uniphier-pro4-ref.dts | 8 +++ arch/arm/boot/dts/uniphier-pro4.dtsi | 97 +++++++++++++++++++++++++++++++++ 3 files changed, 113 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 27ff2b7b9d0e..6baee4410d9c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -99,3 +99,11 @@ &usb1 { status = "okay"; }; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 48f7f23bab91..d2ce5c039865 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -108,3 +108,11 @@ reg = <0>; }; }; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 8cb4e7043e60..a309e64c57c8 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -411,6 +411,11 @@ vbus-supply = <&usb1_vbus>; }; }; + + sg_clk: clock { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; }; soc-glue@5f900000 { @@ -513,6 +518,98 @@ }; }; + ahci0: sata@65600000 { + compatible = "socionext,uniphier-pro4-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = ; + clocks = <&sys_clk 12>, <&sys_clk 28>; + resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>; + ports-implemented = <1>; + phys = <&ahci0_phy>; + assigned-clocks = <&sg_clk 0>; + assigned-clock-rates = <25000000>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci0_rst: reset-controller@0 { + compatible = "socionext,uniphier-pro4-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 28>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci0_phy: sata-phy@10 { + compatible = "socionext,uniphier-pro4-ahci-phy"; + reg = <0x10 0x40>; + clock-names = "link", "gio"; + clocks = <&sys_clk 28>, <&sys_clk 12>; + reset-names = "link", "gio", "phy", + "pm", "tx", "rx"; + resets = <&sys_rst 28>, <&sys_rst 12>, + <&sys_rst 30>, + <&ahci0_rst 0>, <&ahci0_rst 1>, + <&ahci0_rst 2>; + #phy-cells = <0>; + }; + }; + + ahci1: sata@65800000 { + compatible = "socionext,uniphier-pro4-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65800000 0x10000>; + interrupts = ; + clocks = <&sys_clk 12>, <&sys_clk 29>; + resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>; + ports-implemented = <1>; + phys = <&ahci1_phy>; + assigned-clocks = <&sg_clk 0>; + assigned-clock-rates = <25000000>; + }; + + sata-controller@65900000 { + compatible = "socionext,uniphier-pro4-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65900000 0x100>; + + ahci1_rst: reset-controller@0 { + compatible = "socionext,uniphier-pro4-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 29>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 29>; + #reset-cells = <1>; + }; + + ahci1_phy: sata-phy@10 { + compatible = "socionext,uniphier-pro4-ahci-phy"; + reg = <0x10 0x40>; + clock-names = "link", "gio"; + clocks = <&sys_clk 29>, <&sys_clk 12>; + reset-names = "link", "gio", "phy", + "pm", "tx", "rx"; + resets = <&sys_rst 29>, <&sys_rst 12>, + <&sys_rst 30>, + <&ahci1_rst 0>, <&ahci1_rst 1>, + <&ahci1_rst 2>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; -- cgit From 97837505f067e9abcb2cc8b9c0a31e5330a36a36 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:47 +0900 Subject: ARM: dts: uniphier: Add ahci controller nodes for PXs2 Add ahci core controller and glue layer nodes including reset-controller and sata-phy. This supports for PXs2 and the boards without PXs2 vodka board that doesn't implement any SATA connectors. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-8-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 4 +++ arch/arm/boot/dts/uniphier-pxs2.dtsi | 40 ++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 759384b60663..5f18b926c50a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -99,3 +99,7 @@ &usb1 { status = "okay"; }; + +&ahci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index d2a2468d4ea0..ca4dccf56a67 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -599,6 +599,46 @@ }; }; + ahci: sata@65600000 { + compatible = "socionext,uniphier-pxs2-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = ; + clocks = <&sys_clk 28>; + resets = <&sys_rst 28>, <&ahci_rst 0>; + ports-implemented = <1>; + phys = <&ahci_phy>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_rst: reset-controller@0 { + compatible = "socionext,uniphier-pxs2-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci_phy: sata-phy@10 { + compatible = "socionext,uniphier-pxs2-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; -- cgit From 0aca3912ce318b1b6a45d2945f08950a63197f3b Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:48 +0900 Subject: ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card The dtschema warning: uniphier-ld11-ref.dt.yaml: system-bus@58c00000: 'interrupt-parent' does not match any of the regexes: '^.*@[1-5],[1-9a-f][0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-9-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-support-card.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index 444802fee9fb..97e7d5db8eb8 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -8,13 +8,13 @@ &system_bus { status = "okay"; ranges = <1 0x00000000 0x42000000 0x02000000>; - interrupt-parent = <&gpio>; ethsc: ethernet@1,1f00000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <1 0x01f00000 0x1000>; phy-mode = "mii"; reg-io-width = <4>; + interrupt-parent = <&gpio>; }; serialsc: serial@1,1fb0000 { @@ -22,5 +22,6 @@ reg = <1 0x01fb0000 0x20>; clock-frequency = <12288000>; reg-shift = <1>; + interrupt-parent = <&gpio>; }; }; -- cgit From 86b20827becef3fb69c41fb8327cce7511956783 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:22:49 +0900 Subject: ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node The generic platform driver pcie-designware-plat.c doesn't work for UniPhier PCIe endpoint controller, because the controller has some necessary initialization sequence for the controller-specific logic. Currently the controller doesn't use "snps,dw-pcie-ep" compatible, so this is no longer needed. Remove the compatible string from the pcie-ep node. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042249.4708-10-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pro5.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 33221d7130f1..100edd7438d8 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -620,8 +620,7 @@ }; pcie_ep: pcie-ep@66000000 { - compatible = "socionext,uniphier-pro5-pcie-ep", - "snps,dw-pcie-ep"; + compatible = "socionext,uniphier-pro5-pcie-ep"; status = "disabled"; reg-names = "dbi", "dbi2", "link", "addr_space"; reg = <0x66000000 0x1000>, <0x66001000 0x1000>, -- cgit From 2dfb62d6ce80b3536d1a915177ae82496bd7ac4a Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:12 +0900 Subject: arm64: dts: uniphier: Rename pvtctl node to thermal-sensor The pvtctl node belongs to thermal-sensor, so the node name should be renamed to thermal-sensor. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-2-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 8f2c1c1e2c64..debab9f0e3e1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -715,7 +715,7 @@ compatible = "socionext,uniphier-wdt"; }; - pvtctl: pvtctl { + pvtctl: thermal-sensor { compatible = "socionext,uniphier-ld20-thermal"; interrupts = <0 3 4>; #thermal-sensor-cells = <0>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index ba75adedbf79..e96e7ed98717 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -545,7 +545,7 @@ compatible = "socionext,uniphier-wdt"; }; - pvtctl: pvtctl { + pvtctl: thermal-sensor { compatible = "socionext,uniphier-pxs3-thermal"; interrupts = <0 3 4>; #thermal-sensor-cells = <0>; -- cgit From 8fa3e658579ae0a80cd8ec05b1c2b4a9061aeafe Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:13 +0900 Subject: arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller Actual phy nodes are each child node. The parent node should be usb-controller node as a representation of the phy integration. This applies to the devicetree for LD11 SoC. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-3-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 15dcfc259854..16d281cae31d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -530,7 +530,7 @@ compatible = "socionext,uniphier-ld11-pinctrl"; }; - usb-phy { + usb-controller { compatible = "socionext,uniphier-ld11-usb2-phy"; #address-cells = <1>; #size-cells = <0>; -- cgit From 4cc752a88ca92f44434dc57c9ead14490f93bfa8 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:14 +0900 Subject: arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller This "usb-glue" stands for an external controller associated with USB core, however, this is not common. So rename to "usb-controller". Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-4-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index debab9f0e3e1..6466c9213bb7 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -762,7 +762,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index e96e7ed98717..513a2b91dc97 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -611,7 +611,7 @@ dr_mode = "host"; }; - usb-glue@65b00000 { + usb-controller@65b00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; #address-cells = <1>; @@ -713,7 +713,7 @@ dr_mode = "host"; }; - usb-glue@65d00000 { + usb-controller@65d00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; #address-cells = <1>; -- cgit From 173b9b8e5f8372e9fd15d8ed488ff86556d1b416 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:15 +0900 Subject: arm64: dts: uniphier: Rename gpio-hog nodes According to gpio-hog schema, should add the suffix "-hog" to the node names including gpio-hog to fix the following warning. uniphier-ld11-ref.dtb: gpio@55000000: 'xirq0' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml This applies to the devicetre for LD11, LD20 and PXs3 SoCs. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-5-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts | 4 ++-- arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 617d2b1e9b1e..41b47f5d2ed7 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -51,7 +51,7 @@ }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = ; input; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts index aa159a11292c..b55b70ded015 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts @@ -168,12 +168,12 @@ &gpio { /* IRQs for Max3421 */ - xirq0 { + xirq0-hog { gpio-hog; gpios = ; input; }; - xirq10 { + xirq10-hog { gpio-hog; gpios = ; input; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 39ee279a1eb9..8c111588c9a1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -51,7 +51,7 @@ }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = ; input; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 086040306fb3..feb070f934e9 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -68,7 +68,7 @@ }; &gpio { - xirq4 { + xirq4-hog { gpio-hog; gpios = ; input; -- cgit From 5ba95e8ec2dd9fd8917a4e932c520234c6614c39 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:16 +0900 Subject: arm64: dts: uniphier: Use GIC interrupt definitions Use human-readable definitions for GIC interrupt type and flag, instead of hard-coding the numbers. No functional change. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-6-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- .../arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 4 +- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 51 +++++++++--------- .../boot/dts/socionext/uniphier-ld20-akebi96.dts | 2 +- .../arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4 +- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 60 +++++++++++----------- .../arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 4 +- arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 56 ++++++++++---------- 7 files changed, 93 insertions(+), 88 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 41b47f5d2ed7..414aeb99e68f 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -39,11 +39,11 @@ }; ðsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 16d281cae31d..525bff79efea 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -7,6 +7,7 @@ #include #include +#include / { compatible = "socionext,uniphier-ld11"; @@ -102,10 +103,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, - <1 14 4>, - <1 11 4>, - <1 10 4>; + interrupts = , + , + , + ; }; reserved-memory { @@ -131,7 +132,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -144,7 +145,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -155,7 +156,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -166,7 +167,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -177,7 +178,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -188,7 +189,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -223,7 +224,7 @@ audio@56000000 { compatible = "socionext,uniphier-ld11-aio"; reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_aout1>, <&pinctrl_aoutiec1>; @@ -323,7 +324,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -337,7 +338,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -350,7 +351,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = ; clocks = <&peri_clk 6>; resets = <&peri_rst 6>; clock-frequency = <400000>; @@ -362,7 +363,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -376,7 +377,7 @@ reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 45 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; clocks = <&peri_clk 8>; @@ -389,7 +390,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = ; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -440,7 +441,7 @@ emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; @@ -460,7 +461,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a800100 0x100>; - interrupts = <0 243 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, @@ -476,7 +477,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a810100 0x100>; - interrupts = <0 244 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, @@ -492,7 +493,7 @@ compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; reg = <0x5a820100 0x100>; - interrupts = <0 245 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, @@ -573,7 +574,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = ; dma-channels = <16>; #dma-cells = <2>; }; @@ -591,7 +592,7 @@ <0x5fe40000 0x80000>; /* GICR */ interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 4>; + interrupts = ; }; sysctrl@61840000 { @@ -618,7 +619,7 @@ compatible = "socionext,uniphier-ld11-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = ; clock-names = "ether"; clocks = <&sys_clk 6>; reset-names = "ether"; @@ -640,7 +641,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts index b55b70ded015..fba454adae7d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts @@ -110,7 +110,7 @@ spi-max-frequency = <12500000>; interrupt-parent = <&gpio>; interrupt-names = "udc"; - interrupts = <0 2>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 8c111588c9a1..a5f2083f8b75 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -39,11 +39,11 @@ }; ðsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; &serial0 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 6466c9213bb7..b7896541d7c1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -7,6 +7,7 @@ #include #include +#include #include / { @@ -176,10 +177,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, - <1 14 4>, - <1 11 4>, - <1 10 4>; + interrupts = , + , + , + ; }; thermal-zones { @@ -236,7 +237,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -249,7 +250,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -262,7 +263,7 @@ reg = <0x54006200 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 229 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; clocks = <&peri_clk 13>; @@ -275,7 +276,7 @@ reg = <0x54006300 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 230 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3>; clocks = <&peri_clk 14>; @@ -286,7 +287,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -297,7 +298,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -308,7 +309,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -319,7 +320,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -348,7 +349,7 @@ audio@56000000 { compatible = "socionext,uniphier-ld20-aio"; reg = <0x56000000 0x80000>; - interrupts = <0 144 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_aout1>, <&pinctrl_aoutiec1>; @@ -448,7 +449,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -462,7 +463,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -475,7 +476,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = ; clocks = <&peri_clk 6>; resets = <&peri_rst 6>; clock-frequency = <400000>; @@ -487,7 +488,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -501,7 +502,7 @@ reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 45 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; clocks = <&peri_clk 8>; @@ -514,7 +515,7 @@ reg = <0x58785000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 25 4>; + interrupts = ; clocks = <&peri_clk 9>; resets = <&peri_rst 9>; clock-frequency = <400000>; @@ -570,7 +571,7 @@ emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; @@ -590,7 +591,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd>; clocks = <&sd_clk 0>; @@ -675,7 +676,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = ; dma-channels = <16>; #dma-cells = <2>; }; @@ -693,7 +694,7 @@ <0x5fe80000 0x80000>; /* GICR */ interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 4>; + interrupts = ; }; sysctrl@61840000 { @@ -717,7 +718,7 @@ pvtctl: thermal-sensor { compatible = "socionext,uniphier-ld20-thermal"; - interrupts = <0 3 4>; + interrupts = ; #thermal-sensor-cells = <0>; socionext,tmod-calibration = <0x0f22 0x68ee>; }; @@ -727,7 +728,7 @@ compatible = "socionext,uniphier-ld20-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "ether"; @@ -749,7 +750,7 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "host"; - interrupts = <0 134 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>, <&pinctrl_usb2>, <&pinctrl_usb3>; @@ -915,7 +916,8 @@ <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; #interrupt-cells = <1>; interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; + interrupts = , + ; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ <0 0 0 2 &pcie_intc 1>, /* INTB */ @@ -928,7 +930,7 @@ interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&gic>; - interrupts = <0 226 4>; + interrupts = ; }; }; @@ -950,7 +952,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index feb070f934e9..506c7b9ff50d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -40,11 +40,11 @@ }; ðsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &serialsc { - interrupts = <4 8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; &spi0 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 513a2b91dc97..bd5c1e3b64b0 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -7,6 +7,7 @@ #include #include +#include #include / { @@ -135,10 +136,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, - <1 14 4>, - <1 11 4>, - <1 10 4>; + interrupts = , + , + , + ; }; thermal-zones { @@ -195,7 +196,7 @@ reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 39 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; @@ -208,7 +209,7 @@ reg = <0x54006100 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 216 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&peri_clk 12>; @@ -219,7 +220,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006800 0x40>; - interrupts = <0 33 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; @@ -230,7 +231,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006900 0x40>; - interrupts = <0 35 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; @@ -241,7 +242,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; @@ -252,7 +253,7 @@ compatible = "socionext,uniphier-uart"; status = "disabled"; reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; @@ -284,7 +285,7 @@ reg = <0x58780000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 41 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; @@ -298,7 +299,7 @@ reg = <0x58781000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 42 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; @@ -312,7 +313,7 @@ reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 43 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; @@ -326,7 +327,7 @@ reg = <0x58783000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 44 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; @@ -340,7 +341,7 @@ reg = <0x58786000 0x80>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 26 4>; + interrupts = ; clocks = <&peri_clk 10>; resets = <&peri_rst 10>; clock-frequency = <400000>; @@ -396,7 +397,7 @@ emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; @@ -416,7 +417,7 @@ compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; - interrupts = <0 76 4>; + interrupts = ; pinctrl-names = "default", "uhs"; pinctrl-0 = <&pinctrl_sd>; pinctrl-1 = <&pinctrl_sd_uhs>; @@ -505,7 +506,7 @@ xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; reg = <0x5fc10000 0x5300>; - interrupts = <0 188 4>; + interrupts = ; dma-channels = <16>; #dma-cells = <2>; }; @@ -523,7 +524,7 @@ <0x5fe80000 0x80000>; /* GICR */ interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 4>; + interrupts = ; }; sysctrl@61840000 { @@ -547,7 +548,7 @@ pvtctl: thermal-sensor { compatible = "socionext,uniphier-pxs3-thermal"; - interrupts = <0 3 4>; + interrupts = ; #thermal-sensor-cells = <0>; socionext,tmod-calibration = <0x0f22 0x68ee>; }; @@ -557,7 +558,7 @@ compatible = "socionext,uniphier-pxs3-ave4"; status = "disabled"; reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; clock-names = "ether"; @@ -578,7 +579,7 @@ compatible = "socionext,uniphier-pxs3-ave4"; status = "disabled"; reg = <0x65200000 0x8500>; - interrupts = <0 67 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether1_rgmii>; clock-names = "ether"; @@ -600,7 +601,7 @@ status = "disabled"; reg = <0x65a00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 134 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -702,7 +703,7 @@ status = "disabled"; reg = <0x65c00000 0xcd00>; interrupt-names = "dwc_usb3"; - interrupts = <0 137 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; @@ -812,7 +813,8 @@ <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; #interrupt-cells = <1>; interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; + interrupts = , + ; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ <0 0 0 2 &pcie_intc 1>, /* INTB */ @@ -825,7 +827,7 @@ interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&gic>; - interrupts = <0 226 4>; + interrupts = ; }; }; @@ -847,7 +849,7 @@ reg = <0x68000000 0x20>, <0x68100000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 65 4>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; -- cgit From 23e001e75db79c2ef8f97a1175cdb4b2224ae6a9 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:17 +0900 Subject: arm64: dts: uniphier: Add ahci controller nodes for PXs3 Add ahci core controller and glue layer nodes including reset-controller and sata-phy. This supports for PXs3 and the boards. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-7-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- .../arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 8 +++ arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 80 ++++++++++++++++++++++ 2 files changed, 88 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 506c7b9ff50d..1ced6190ab2b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -137,6 +137,14 @@ }; }; +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; + &pinctrl_ether_rgmii { tx { pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1", diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index bd5c1e3b64b0..c93b380fce94 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -596,6 +596,86 @@ }; }; + ahci0: sata@65600000 { + compatible = "socionext,uniphier-pxs3-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = ; + clocks = <&sys_clk 28>; + resets = <&sys_rst 28>, <&ahci0_rst 0>; + ports-implemented = <1>; + phys = <&ahci0_phy>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci0_rst: reset-controller@0 { + compatible = "socionext,uniphier-pxs3-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci0_phy: sata-phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + + ahci1: sata@65800000 { + compatible = "socionext,uniphier-pxs3-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65800000 0x10000>; + interrupts = ; + clocks = <&sys_clk 29>; + resets = <&sys_rst 29>, <&ahci1_rst 0>; + ports-implemented = <1>; + phys = <&ahci1_phy>; + }; + + sata-controller@65900000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65900000 0x100>; + + ahci1_rst: reset-controller@0 { + compatible = "socionext,uniphier-pxs3-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 29>; + reset-names = "link"; + resets = <&sys_rst 29>; + #reset-cells = <1>; + }; + + ahci1_phy: sata-phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link", "phy"; + clocks = <&sys_clk 29>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 29>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; -- cgit From 19fee1a1096d21ab1f1e712148b5417bda2939a2 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:18 +0900 Subject: arm64: dts: uniphier: Add USB-device support for PXs3 reference board PXs3 reference board can change each USB port 0 and 1 to device mode with jumpers. Prepare devicetree sources for USB port 0 and 1. This specifies dr_mode, pinctrl, and some quirks and removes nodes for unused phys and vbus-supply properties. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-pinctrl.dtsi | 10 ++++++ arch/arm64/boot/dts/socionext/Makefile | 4 ++- .../dts/socionext/uniphier-pxs3-ref-gadget0.dts | 41 ++++++++++++++++++++++ .../dts/socionext/uniphier-pxs3-ref-gadget1.dts | 40 +++++++++++++++++++++ 4 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts create mode 100644 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index c0fd029b37e5..f909ec2e5333 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -196,11 +196,21 @@ function = "usb0"; }; + pinctrl_usb0_device: usb0-device { + groups = "usb0_device"; + function = "usb0"; + }; + pinctrl_usb1: usb1 { groups = "usb1"; function = "usb1"; }; + pinctrl_usb1_device: usb1-device { + groups = "usb1_device"; + function = "usb1"; + }; + pinctrl_usb2: usb2 { groups = "usb2"; function = "usb2"; diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile index dda3da33614b..33989a9643ac 100644 --- a/arch/arm64/boot/dts/socionext/Makefile +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -5,4 +5,6 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld20-akebi96.dtb \ uniphier-ld20-global.dtb \ uniphier-ld20-ref.dtb \ - uniphier-pxs3-ref.dtb + uniphier-pxs3-ref.dtb \ + uniphier-pxs3-ref-gadget0.dtb \ + uniphier-pxs3-ref-gadget1.dtb diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts new file mode 100644 index 000000000000..7069f51bc120 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// +// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #0) +// +// Copyright (C) 2021 Socionext Inc. +// Author: Kunihiko Hayashi + +/dts-v1/; +#include "uniphier-pxs3-ref.dts" + +/ { + model = "UniPhier PXs3 Reference Board (USB-Device #0)"; +}; + +/* I2C3 pinctrl is shared with USB*VBUSIN */ +&i2c3 { + status = "disabled"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + pinctrl-0 = <&pinctrl_usb0_device>; + snps,dis_enblslpm_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,usb2_gadget_lpm_disable; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb0_hsphy0>, <&usb0_ssphy0>; +}; + +&usb0_hsphy0 { + /delete-property/ vbus-supply; +}; + +&usb0_ssphy0 { + /delete-property/ vbus-supply; +}; + +/delete-node/ &usb0_hsphy1; +/delete-node/ &usb0_ssphy1; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts new file mode 100644 index 000000000000..a3cfa8113ffb --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// +// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #1) +// +// Copyright (C) 2021 Socionext Inc. +// Author: Kunihiko Hayashi + +/dts-v1/; +#include "uniphier-pxs3-ref.dts" + +/ { + model = "UniPhier PXs3 Reference Board (USB-Device #1)"; +}; + +/* I2C3 pinctrl is shared with USB*VBUSIN */ +&i2c3 { + status = "disabled"; +}; + +&usb1 { + status = "okay"; + dr_mode = "peripheral"; + pinctrl-0 = <&pinctrl_usb1_device>; + snps,dis_enblslpm_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,usb2_gadget_lpm_disable; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb1_hsphy0>, <&usb1_ssphy0>; +}; + +&usb1_hsphy0 { + /delete-property/ vbus-supply; +}; + +&usb1_ssphy0 { + /delete-property/ vbus-supply; +}; + +/delete-node/ &usb1_hsphy1; -- cgit From 4ff64e7089d15d6223d8e7eca12fc7ba090f25a4 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:19 +0900 Subject: arm64: dts: uniphier: Fix opp-table node name for LD20 To fix dtbs_check warning: uniphier-ld20-akebi96.dt.yaml: opp-table0: $nodename:0: 'opp-table0' does not match '^opp-table(-[a-z0-9]+)?$' From schema: Documentation/devicetree/bindings/opp/opp-v2.yaml Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-9-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index b7896541d7c1..bb52dcb45777 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -81,7 +81,7 @@ }; }; - cluster0_opp: opp-table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -119,7 +119,7 @@ }; }; - cluster1_opp: opp-table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; -- cgit From d93ecbf56946640b3746dcd7b0fe4c808bf2b580 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:20 +0900 Subject: arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node The generic platform driver pcie-designware-plat.c doesn't work for UniPhier PCIe host controller, because the controller has some necessary initialization sequence for the controller-specific logic. Currently the controller doesn't use "snps,dw-pcie" compatible, so this is no longer needed. Remove the compatible string from the pcie node. Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-10-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index bb52dcb45777..938753ded7c0 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -896,7 +896,7 @@ }; pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + compatible = "socionext,uniphier-pcie"; status = "disabled"; reg-names = "dbi", "link", "config"; reg = <0x66000000 0x1000>, <0x66010000 0x10000>, diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index c93b380fce94..f10685625b6a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -873,7 +873,7 @@ }; pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + compatible = "socionext,uniphier-pcie"; status = "disabled"; reg-names = "dbi", "link", "config"; reg = <0x66000000 0x1000>, <0x66010000 0x10000>, -- cgit From 5381a96cd9c4247eafb2dfcfccf491d0bba2f5ca Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 13 Sep 2022 13:23:21 +0900 Subject: arm64: dts: uniphier: Add L2 cache node Add a L2 cache node referenced from CPU nodes as the missing cache hierarchy information because the following warning was issued. cacheinfo: Unable to detect cache hierarchy for CPU 0 Early cacheinfo failed, ret = -2 Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20220913042321.4817-11-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 6 ++++++ arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 12 ++++++++++++ arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 8 ++++++++ 3 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 525bff79efea..1c76b4375b2e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -36,6 +36,7 @@ reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; }; @@ -45,8 +46,13 @@ reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; }; + + l2: l2-cache { + compatible = "cache"; + }; }; cluster0_opp: opp-table { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 938753ded7c0..9308458f9611 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -46,6 +46,7 @@ reg = <0 0x000>; clocks = <&sys_clk 32>; enable-method = "psci"; + next-level-cache = <&a72_l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -56,6 +57,7 @@ reg = <0 0x001>; clocks = <&sys_clk 32>; enable-method = "psci"; + next-level-cache = <&a72_l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -66,6 +68,7 @@ reg = <0 0x100>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&a53_l2>; operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; }; @@ -76,9 +79,18 @@ reg = <0 0x101>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&a53_l2>; operating-points-v2 = <&cluster1_opp>; #cooling-cells = <2>; }; + + a72_l2: l2-cache0 { + compatible = "cache"; + }; + + a53_l2: l2-cache1 { + compatible = "cache"; + }; }; cluster0_opp: opp-table-0 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index f10685625b6a..b0c29510a7da 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -43,6 +43,7 @@ reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -53,6 +54,7 @@ reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -63,6 +65,7 @@ reg = <0 0x002>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -73,9 +76,14 @@ reg = <0 0x003>; clocks = <&sys_clk 33>; enable-method = "psci"; + next-level-cache = <&l2>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; + + l2: l2-cache { + compatible = "cache"; + }; }; cluster0_opp: opp-table { -- cgit From bd1a665a01b4d65fd8dc6fece4b376fa5c8c55bb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 28 Sep 2022 18:15:55 -0700 Subject: arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 According to s3fwrn5 driver code the "enable" GPIO line is driven "high" when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low" when chip is in use. s3fwrn5_phy_power_ctrl(): ... gpio_set_value(phy->gpio_en, 1); ... if (mode != S3FWRN5_MODE_COLD) { msleep(S3FWRN5_EN_WAIT_TIME); gpio_set_value(phy->gpio_en, 0); msleep(S3FWRN5_EN_WAIT_TIME); } Therefore the line described by "en-gpios" property should be annotated as "active low". The wakeup gpio appears to have correct polarity (active high). Signed-off-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20220929011557.4165216-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 91c9bd1b47dd..bde6a6bb8dfc 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -795,7 +795,7 @@ reg = <0x27>; interrupt-parent = <&gpa1>; interrupts = <3 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; }; }; -- cgit From a08137bd1e0a7ce951dce9ce4a83e39d379b6e1b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 27 Sep 2022 15:05:03 -0700 Subject: ARM: dts: exynos: fix polarity of VBUS GPIO of Origen EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-origen.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 6db09dba07ff..a3905e27b9cd 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -95,7 +95,7 @@ }; &ehci { - samsung,vbus-gpio = <&gpx3 5 1>; + samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>; status = "okay"; phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; -- cgit From 17fffac44943a619ec76463655b1ed7fccd8bea7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 26 Sep 2022 14:58:24 +0200 Subject: ARM: dts: s5pv210: correct double "pins" in pinmux node Drop second "pins" suffix from pin configuration/mux nodes. Link: https://lore.kernel.org/r/20220926125824.477920-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s5pv210-aries.dtsi | 4 ++-- arch/arm/boot/dts/s5pv210-galaxys.dts | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 5541df4df628..964c5fe51755 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -738,7 +738,7 @@ samsung,pin-pud = ; }; - magnetometer_i2c_pins: yas529-i2c-pins-pins { + magnetometer_i2c_pins: yas529-i2c-pins { samsung,pins = "gpj0-0", "gpj0-1"; samsung,pin-pud = ; samsung,pin-drv = ; @@ -788,7 +788,7 @@ samsung,pin-drv = ; }; - pmic_i2c_pins: pmic-i2c-pins-pins { + pmic_i2c_pins: pmic-i2c-pins { samsung,pins = "gpj4-0", "gpj4-3"; samsung,pin-pud = ; samsung,pin-drv = ; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index cdd3653d487f..532d3f5bceb1 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -150,7 +150,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep_cfg>; - fm_i2c_pins: fm-i2c-pins-pins { + fm_i2c_pins: fm-i2c-pins { samsung,pins = "gpd1-2", "gpd1-3"; samsung,pin-pud = ; samsung,pin-drv = ; -- cgit From 114b9da7ebd964697a7ca5f85f68f61503e91f3a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 5 Oct 2022 10:12:43 +0200 Subject: Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" Adding the #address-cells/#size-cells properties without also adding the other required properties for PCI nodes causes new build warnings from dtc that now show up everywhere, rather than just while verifying the yaml bindings: arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Revert it for now. Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties") Reported-by: Stephen Rothwell Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/bcm5301x.dtsi | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index a06184b8e0d9..5fc1b847f4aa 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -239,26 +239,14 @@ pcie0: pcie@12000 { reg = <0x00012000 0x1000>; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; }; pcie1: pcie@13000 { reg = <0x00013000 0x1000>; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; }; pcie2: pcie@14000 { reg = <0x00014000 0x1000>; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; }; usb2: usb2@21000 { -- cgit