From c1f82478c535f1de9fecf3cafa82014f312d5d4e Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Tue, 17 Aug 2010 13:50:23 +0800 Subject: mtd: pxa3xx_nand: condense the flash definition Adding a new flash definition would need less code. Keep the platform passing flash definition method. If one flash is both defined in platform data and builtin table, driver would select the one from platform data first. By this way, platform could select the timing most suit for itself, not need to follow the common settings. Signed-off-by: Lei Wen Signed-off-by: Haojian Zhuang Acked-by: Eric Miao Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/plat-pxa/include/plat/pxa3xx_nand.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h index 3478eae32d8a..01a8448e471c 100644 --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h +++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h @@ -30,15 +30,15 @@ struct pxa3xx_nand_cmdset { }; struct pxa3xx_nand_flash { - const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ - const struct pxa3xx_nand_cmdset *cmdset; - - uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */ - uint32_t page_size; /* Page size in bytes (PAGE_SZ) */ - uint32_t flash_width; /* Width of Flash memory (DWIDTH_M) */ - uint32_t dfc_width; /* Width of flash controller(DWIDTH_C) */ - uint32_t num_blocks; /* Number of physical blocks in Flash */ - uint32_t chip_id; + uint32_t chip_id; + unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ + unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ + unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */ + unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ + unsigned int num_blocks; /* Number of physical blocks in Flash */ + + struct pxa3xx_nand_cmdset *cmdset; /* NAND command set */ + struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ }; struct pxa3xx_nand_platform_data { -- cgit From bc49c28962de0e3758ac2cdc7821d506b827f219 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 12 Sep 2010 15:52:59 +0200 Subject: mtd: add Broadcom BCM63xx image tag partition parser This patch adds support for parsing Broadcom BCM63xx image tag format and creating MTD partitions accordingly. This driver is a platform_device which can be instantiated accordingly by bcm63xx board support code. Signed-off-by: Daniel Dickinson Signed-off-by: Mike Albon Signed-off-by: Florian Fainelli Signed-off-by: David Woodhouse --- arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h | 97 +++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h (limited to 'arch') diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h new file mode 100644 index 000000000000..5325084d5c48 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h @@ -0,0 +1,97 @@ +#ifndef __BCM963XX_TAG_H +#define __BCM963XX_TAG_H + +#define TAGVER_LEN 4 /* Length of Tag Version */ +#define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */ +#define SIG1_LEN 20 /* Company Signature 1 Length */ +#define SIG2_LEN 14 /* Company Signature 2 Lenght */ +#define BOARDID_LEN 16 /* Length of BoardId */ +#define ENDIANFLAG_LEN 2 /* Endian Flag Length */ +#define CHIPID_LEN 6 /* Chip Id Length */ +#define IMAGE_LEN 10 /* Length of Length Field */ +#define ADDRESS_LEN 12 /* Length of Address field */ +#define DUALFLAG_LEN 2 /* Dual Image flag Length */ +#define INACTIVEFLAG_LEN 2 /* Inactie Flag Length */ +#define RSASIG_LEN 20 /* Length of RSA Signature in tag */ +#define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */ +#define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */ +#define TAGINFO2_LEN 16 /* Length of vendor information field2 in tag */ +#define CRC_LEN 4 /* Length of CRC in bytes */ +#define ALTTAGINFO_LEN 54 /* Alternate length for vendor information; Pirelli */ + +#define NUM_PIRELLI 2 +#define IMAGETAG_CRC_START 0xFFFFFFFF + +#define PIRELLI_BOARDS { \ + "AGPF-S0", \ + "DWV-S0", \ +} + +/* + * The broadcom firmware assumes the rootfs starts the image, + * therefore uses the rootfs start (flash_image_address) + * to determine where to flash the image. Since we have the kernel first + * we have to give it the kernel address, but the crc uses the length + * associated with this address (root_length), which is added to the kernel + * length (kernel_length) to determine the length of image to flash and thus + * needs to be rootfs + deadcode (jffs2 EOF marker) +*/ + +struct bcm_tag { + /* 0-3: Version of the image tag */ + char tag_version[TAGVER_LEN]; + /* 4-23: Company Line 1 */ + char sig_1[SIG1_LEN]; + /* 24-37: Company Line 2 */ + char sig_2[SIG2_LEN]; + /* 38-43: Chip this image is for */ + char chip_id[CHIPID_LEN]; + /* 44-59: Board name */ + char board_id[BOARDID_LEN]; + /* 60-61: Map endianness -- 1 BE 0 LE */ + char big_endian[ENDIANFLAG_LEN]; + /* 62-71: Total length of image */ + char total_length[IMAGE_LEN]; + /* 72-83: Address in memory of CFE */ + char cfe__address[ADDRESS_LEN]; + /* 84-93: Size of CFE */ + char cfe_length[IMAGE_LEN]; + /* 94-105: Address in memory of image start + * (kernel for OpenWRT, rootfs for stock firmware) + */ + char flash_image_start[ADDRESS_LEN]; + /* 106-115: Size of rootfs */ + char root_length[IMAGE_LEN]; + /* 116-127: Address in memory of kernel */ + char kernel_address[ADDRESS_LEN]; + /* 128-137: Size of kernel */ + char kernel_length[IMAGE_LEN]; + /* 138-139: Unused at the moment */ + char dual_image[DUALFLAG_LEN]; + /* 140-141: Unused at the moment */ + char inactive_flag[INACTIVEFLAG_LEN]; + /* 142-161: RSA Signature (not used; some vendors may use this) */ + char rsa_signature[RSASIG_LEN]; + /* 162-191: Compilation and related information (not used in OpenWrt) */ + char information1[TAGINFO1_LEN]; + /* 192-195: Version flash layout */ + char flash_layout_ver[FLASHLAYOUTVER_LEN]; + /* 196-199: kernel+rootfs CRC32 */ + char fskernel_crc[CRC_LEN]; + /* 200-215: Unused except on Alice Gate where is is information */ + char information2[TAGINFO2_LEN]; + /* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */ + char image_crc[CRC_LEN]; + /* 220-223: CRC32 of rootfs partition */ + char rootfs_crc[CRC_LEN]; + /* 224-227: CRC32 of kernel partition */ + char kernel_crc[CRC_LEN]; + /* 228-235: Unused at present */ + char reserved1[8]; + /* 236-239: CRC32 of header excluding tagVersion */ + char header_crc[CRC_LEN]; + /* 240-255: Unused at present */ + char reserved2[16]; +}; + +#endif /* __BCM63XX_TAG_H */ -- cgit From 93ac5a552c831096003f9bc74471300dc1710a42 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 13 Sep 2010 00:35:37 +0200 Subject: ARM: platform data to use the FSMC NAND with the U300 Just as it says, if this is merged along with the other patch, the driver supports the U300 NAND flash interface. Signed-off-by: Linus Walleij Signed-off-by: David Woodhouse --- arch/arm/mach-u300/clock.c | 6 ++-- arch/arm/mach-u300/core.c | 47 ++++++++++++++++++++++++++--- arch/arm/mach-u300/include/mach/u300-regs.h | 2 -- 3 files changed, 45 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 60acf9e708ae..7458fc6df5c6 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -66,7 +66,7 @@ static DEFINE_SPINLOCK(syscon_resetreg_lock); * AMBA bus * | * +- CPU - * +- NANDIF NAND Flash interface + * +- FSMC NANDIF NAND Flash interface * +- SEMI Shared Memory interface * +- ISP Image Signal Processor (U335 only) * +- CDS (U335 only) @@ -726,7 +726,7 @@ static struct clk cpu_clk = { }; static struct clk nandif_clk = { - .name = "NANDIF", + .name = "FSMC", .parent = &amba_clk, .hw_ctrld = false, .reset = true, @@ -1259,7 +1259,7 @@ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ DEF_LOOKUP("amba", &amba_clk), DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("fsmc-nand", &nandif_clk), DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 DEF_LOOKUP("isp", &isp_clk), diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index ea41c236be0f..aa53ee22438f 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -21,7 +21,8 @@ #include #include #include -#include +#include +#include #include #include @@ -30,6 +31,7 @@ #include #include +#include #include #include #include @@ -285,6 +287,13 @@ static struct resource rtc_resources[] = { */ static struct resource fsmc_resources[] = { { + .name = "nand_data", + .start = U300_NAND_CS0_PHYS_BASE, + .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "fsmc_regs", .start = U300_NAND_IF_PHYS_BASE, .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, @@ -1429,11 +1438,39 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct platform_device fsmc_device = { - .name = "nandif", +static struct mtd_partition u300_partitions[] = { + { + .name = "bootrecords", + .offset = 0, + .size = SZ_128K, + }, + { + .name = "free", + .offset = SZ_128K, + .size = 8064 * SZ_1K, + }, + { + .name = "platform", + .offset = 8192 * SZ_1K, + .size = 253952 * SZ_1K, + }, +}; + +static struct fsmc_nand_platform_data nand_platform_data = { + .partitions = u300_partitions, + .nr_partitions = ARRAY_SIZE(u300_partitions), + .options = NAND_SKIP_BBTSCAN, + .width = FSMC_NAND_BW8, +}; + +static struct platform_device nand_device = { + .name = "fsmc-nand", .id = -1, - .num_resources = ARRAY_SIZE(fsmc_resources), .resource = fsmc_resources, + .num_resources = ARRAY_SIZE(fsmc_resources), + .dev = { + .platform_data = &nand_platform_data, + }, }; static struct platform_device ave_device = { @@ -1465,7 +1502,7 @@ static struct platform_device *platform_devs[] __initdata = { &keypad_device, &rtc_device, &gpio_device, - &fsmc_device, + &nand_device, &wdog_device, &ave_device }; diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 56721a0cd2af..8b85df4c8d8f 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -20,11 +20,9 @@ /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 -#define U300_NAND_CS0_VIRT_BASE 0xff040000 /* NFIF */ #define U300_NAND_IF_PHYS_BASE 0x9f800000 -#define U300_NAND_IF_VIRT_BASE 0xff030000 /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 -- cgit From 3ab8f2a2e7011c5e83363b42950757e46ef06824 Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Mon, 18 Oct 2010 15:22:31 +0800 Subject: P4080/eLBC: Make Freescale elbc interrupt common to elbc devices Move Freescale elbc interrupt from nand driver to elbc driver. Then all elbc devices can use the interrupt instead of ONLY nand. For former nand driver, it had the two functions: 1. detecting nand flash partitions; 2. registering elbc interrupt. Now, second function is removed to fsl_lbc.c. Signed-off-by: Lan Chunhe-B25806 Signed-off-by: Roy Zang Reviewed-by: Anton Vorontsov Cc: Wood Scott-B07421 Signed-off-by: David Woodhouse --- arch/powerpc/Kconfig | 7 +- arch/powerpc/include/asm/fsl_lbc.h | 33 +++++- arch/powerpc/sysdev/fsl_lbc.c | 231 ++++++++++++++++++++++++++++++------- 3 files changed, 228 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 631e5a0fb6ab..44df1bac9701 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -687,9 +687,12 @@ config 4xx_SOC bool config FSL_LBC - bool + bool "Freescale Local Bus support" + depends on FSL_SOC help - Freescale Localbus support + Enables reporting of errors from the Freescale local bus + controller. Also contains some common code used by + drivers for specific local bus peripherals. config FSL_GTM bool diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 1b5a21041f9b..06a11124dde1 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -1,9 +1,10 @@ /* Freescale Local Bus Controller * - * Copyright (c) 2006-2007 Freescale Semiconductor + * Copyright © 2006-2007, 2010 Freescale Semiconductor * * Authors: Nick Spence , * Scott Wood + * Jack Lan * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,6 +27,8 @@ #include #include #include +#include +#include struct fsl_lbc_bank { __be32 br; /**< Base Register */ @@ -125,13 +128,23 @@ struct fsl_lbc_regs { #define LTESR_ATMW 0x00800000 #define LTESR_ATMR 0x00400000 #define LTESR_CS 0x00080000 +#define LTESR_UPM 0x00000002 #define LTESR_CC 0x00000001 #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) +#define LTESR_MASK (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \ + | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \ + | LTESR_CC) +#define LTESR_CLEAR 0xFFFFFFFF +#define LTECCR_CLEAR 0xFFFFFFFF +#define LTESR_STATUS LTESR_MASK +#define LTEIR_ENABLE LTESR_MASK +#define LTEDR_ENABLE 0x00000000 __be32 ltedr; /**< Transfer Error Disable Register */ __be32 lteir; /**< Transfer Error Interrupt Register */ __be32 lteatr; /**< Transfer Error Attributes Register */ __be32 ltear; /**< Transfer Error Address Register */ - u8 res6[0xC]; + __be32 lteccr; /**< Transfer Error ECC Register */ + u8 res6[0x8]; __be32 lbcr; /**< Configuration Register */ #define LBCR_LDIS 0x80000000 #define LBCR_LDIS_SHIFT 31 @@ -265,7 +278,23 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm) cpu_relax(); } +/* overview of the fsl lbc controller */ + +struct fsl_lbc_ctrl { + /* device info */ + struct device *dev; + struct fsl_lbc_regs __iomem *regs; + int irq; + wait_queue_head_t irq_wait; + spinlock_t lock; + void *nand; + + /* status read from LTESR by irq handler */ + unsigned int irq_status; +}; + extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar); +extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev; #endif /* __ASM_FSL_LBC_H */ diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index dceb8d1a843d..91c9c53b1845 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -1,9 +1,12 @@ /* * Freescale LBC and UPM routines. * - * Copyright (c) 2007-2008 MontaVista Software, Inc. + * Copyright © 2007-2008 MontaVista Software, Inc. + * Copyright © 2010 Freescale Semiconductor * * Author: Anton Vorontsov + * Author: Jack Lan + * Author: Roy Zang * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,39 +22,16 @@ #include #include #include +#include +#include +#include +#include #include #include static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); -static struct fsl_lbc_regs __iomem *fsl_lbc_regs; - -static char __initdata *compat_lbc[] = { - "fsl,pq2-localbus", - "fsl,pq2pro-localbus", - "fsl,pq3-localbus", - "fsl,elbc", -}; - -static int __init fsl_lbc_init(void) -{ - struct device_node *lbus; - int i; - - for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) { - lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]); - if (lbus) - goto found; - } - return -ENODEV; - -found: - fsl_lbc_regs = of_iomap(lbus, 0); - of_node_put(lbus); - if (!fsl_lbc_regs) - return -ENOMEM; - return 0; -} -arch_initcall(fsl_lbc_init); +struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev; +EXPORT_SYMBOL(fsl_lbc_ctrl_dev); /** * fsl_lbc_find - find Localbus bank @@ -65,13 +45,15 @@ arch_initcall(fsl_lbc_init); int fsl_lbc_find(phys_addr_t addr_base) { int i; + struct fsl_lbc_regs __iomem *lbc; - if (!fsl_lbc_regs) + if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) return -ENODEV; - for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) { - __be32 br = in_be32(&fsl_lbc_regs->bank[i].br); - __be32 or = in_be32(&fsl_lbc_regs->bank[i].or); + lbc = fsl_lbc_ctrl_dev->regs; + for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) { + __be32 br = in_be32(&lbc->bank[i].br); + __be32 or = in_be32(&lbc->bank[i].or); if (br & BR_V && (br & or & BR_BA) == addr_base) return i; @@ -94,22 +76,27 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) { int bank; __be32 br; + struct fsl_lbc_regs __iomem *lbc; bank = fsl_lbc_find(addr_base); if (bank < 0) return bank; - br = in_be32(&fsl_lbc_regs->bank[bank].br); + if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) + return -ENODEV; + + lbc = fsl_lbc_ctrl_dev->regs; + br = in_be32(&lbc->bank[bank].br); switch (br & BR_MSEL) { case BR_MS_UPMA: - upm->mxmr = &fsl_lbc_regs->mamr; + upm->mxmr = &lbc->mamr; break; case BR_MS_UPMB: - upm->mxmr = &fsl_lbc_regs->mbmr; + upm->mxmr = &lbc->mbmr; break; case BR_MS_UPMC: - upm->mxmr = &fsl_lbc_regs->mcmr; + upm->mxmr = &lbc->mcmr; break; default: return -EINVAL; @@ -148,9 +135,12 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) int ret = 0; unsigned long flags; + if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) + return -ENODEV; + spin_lock_irqsave(&fsl_lbc_lock, flags); - out_be32(&fsl_lbc_regs->mar, mar); + out_be32(&fsl_lbc_ctrl_dev->regs->mar, mar); switch (upm->width) { case 8: @@ -172,3 +162,166 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) return ret; } EXPORT_SYMBOL(fsl_upm_run_pattern); + +static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) +{ + struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + + /* clear event registers */ + setbits32(&lbc->ltesr, LTESR_CLEAR); + out_be32(&lbc->lteatr, 0); + out_be32(&lbc->ltear, 0); + out_be32(&lbc->lteccr, LTECCR_CLEAR); + out_be32(&lbc->ltedr, LTEDR_ENABLE); + + /* Enable interrupts for any detected events */ + out_be32(&lbc->lteir, LTEIR_ENABLE); + + return 0; +} + +/* + * NOTE: This interrupt is used to report localbus events of various kinds, + * such as transaction errors on the chipselects. + */ + +static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data) +{ + struct fsl_lbc_ctrl *ctrl = data; + struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + u32 status; + + status = in_be32(&lbc->ltesr); + if (!status) + return IRQ_NONE; + + out_be32(&lbc->ltesr, LTESR_CLEAR); + out_be32(&lbc->lteatr, 0); + out_be32(&lbc->ltear, 0); + ctrl->irq_status = status; + + if (status & LTESR_BM) + dev_err(ctrl->dev, "Local bus monitor time-out: " + "LTESR 0x%08X\n", status); + if (status & LTESR_WP) + dev_err(ctrl->dev, "Write protect error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_ATMW) + dev_err(ctrl->dev, "Atomic write error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_ATMR) + dev_err(ctrl->dev, "Atomic read error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_CS) + dev_err(ctrl->dev, "Chip select error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_UPM) + ; + if (status & LTESR_FCT) { + dev_err(ctrl->dev, "FCM command time-out: " + "LTESR 0x%08X\n", status); + smp_wmb(); + wake_up(&ctrl->irq_wait); + } + if (status & LTESR_PAR) { + dev_err(ctrl->dev, "Parity or Uncorrectable ECC error: " + "LTESR 0x%08X\n", status); + smp_wmb(); + wake_up(&ctrl->irq_wait); + } + if (status & LTESR_CC) { + smp_wmb(); + wake_up(&ctrl->irq_wait); + } + if (status & ~LTESR_MASK) + dev_err(ctrl->dev, "Unknown error: " + "LTESR 0x%08X\n", status); + return IRQ_HANDLED; +} + +/* + * fsl_lbc_ctrl_probe + * + * called by device layer when it finds a device matching + * one our driver can handled. This code allocates all of + * the resources needed for the controller only. The + * resources for the NAND banks themselves are allocated + * in the chip probe function. +*/ + +static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) +{ + int ret; + + if (!dev->dev.of_node) { + dev_err(&dev->dev, "Device OF-Node is NULL"); + return -EFAULT; + } + + fsl_lbc_ctrl_dev = kzalloc(sizeof(*fsl_lbc_ctrl_dev), GFP_KERNEL); + if (!fsl_lbc_ctrl_dev) + return -ENOMEM; + + dev_set_drvdata(&dev->dev, fsl_lbc_ctrl_dev); + + spin_lock_init(&fsl_lbc_ctrl_dev->lock); + init_waitqueue_head(&fsl_lbc_ctrl_dev->irq_wait); + + fsl_lbc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0); + if (!fsl_lbc_ctrl_dev->regs) { + dev_err(&dev->dev, "failed to get memory region\n"); + ret = -ENODEV; + goto err; + } + + fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0); + if (fsl_lbc_ctrl_dev->irq == NO_IRQ) { + dev_err(&dev->dev, "failed to get irq resource\n"); + ret = -ENODEV; + goto err; + } + + fsl_lbc_ctrl_dev->dev = &dev->dev; + + ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev); + if (ret < 0) + goto err; + + ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0, + "fsl-lbc", fsl_lbc_ctrl_dev); + if (ret != 0) { + dev_err(&dev->dev, "failed to install irq (%d)\n", + fsl_lbc_ctrl_dev->irq); + ret = fsl_lbc_ctrl_dev->irq; + goto err; + } + + return 0; + +err: + iounmap(fsl_lbc_ctrl_dev->regs); + kfree(fsl_lbc_ctrl_dev); + return ret; +} + +static const struct of_device_id fsl_lbc_match[] = { + { .compatible = "fsl,elbc", }, + { .compatible = "fsl,pq3-localbus", }, + { .compatible = "fsl,pq2-localbus", }, + { .compatible = "fsl,pq2pro-localbus", }, + {}, +}; + +static struct platform_driver fsl_lbc_ctrl_driver = { + .driver = { + .name = "fsl-lbc", + .of_match_table = fsl_lbc_match, + }, + .probe = fsl_lbc_ctrl_probe, +}; + +static int __init fsl_lbc_init(void) +{ + return platform_driver_register(&fsl_lbc_ctrl_driver); +} +module_init(fsl_lbc_init); -- cgit From 0b824d2b10eacd496c608a7c41a046862d48563b Mon Sep 17 00:00:00 2001 From: Lan Chunhe-B25806 Date: Mon, 18 Oct 2010 15:22:32 +0800 Subject: P4080/mtd: Fix the freescale lbc issue with 36bit mode When system uses 36bit physical address, res.start is 36bit physical address. But the function of in_be32 returns 32bit physical address. Then both of them compared each other is wrong. So by converting the address of res.start into the right format fixes this issue. Signed-off-by: Lan Chunhe-B25806 Signed-off-by: Roy Zang Reviewed-by: Anton Vorontsov Signed-off-by: David Woodhouse --- arch/powerpc/include/asm/fsl_lbc.h | 1 + arch/powerpc/sysdev/fsl_lbc.c | 23 ++++++++++++++++++++++- 2 files changed, 23 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 06a11124dde1..5c1bf3466749 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -248,6 +248,7 @@ struct fsl_upm { int width; }; +extern u32 fsl_lbc_addr(phys_addr_t addr_base); extern int fsl_lbc_find(phys_addr_t addr_base); extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 91c9c53b1845..4fcb5a4e60dd 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -33,6 +33,27 @@ static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev; EXPORT_SYMBOL(fsl_lbc_ctrl_dev); +/** + * fsl_lbc_addr - convert the base address + * @addr_base: base address of the memory bank + * + * This function converts a base address of lbc into the right format for the + * BR register. If the SOC has eLBC then it returns 32bit physical address + * else it convers a 34bit local bus physical address to correct format of + * 32bit address for BR register (Example: MPC8641). + */ +u32 fsl_lbc_addr(phys_addr_t addr_base) +{ + struct device_node *np = fsl_lbc_ctrl_dev->dev->of_node; + u32 addr = addr_base & 0xffff8000; + + if (of_device_is_compatible(np, "fsl,elbc")) + return addr; + + return addr | ((addr_base & 0x300000000ull) >> 19); +} +EXPORT_SYMBOL(fsl_lbc_addr); + /** * fsl_lbc_find - find Localbus bank * @addr_base: base address of the memory bank @@ -55,7 +76,7 @@ int fsl_lbc_find(phys_addr_t addr_base) __be32 br = in_be32(&lbc->bank[i].br); __be32 or = in_be32(&lbc->bank[i].or); - if (br & BR_V && (br & or & BR_BA) == addr_base) + if (br & BR_V && (br & or & BR_BA) == fsl_lbc_addr(addr_base)) return i; } -- cgit