From 72cd7447e72a13ce72d760b42ec295430f77300a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 17 Apr 2013 12:05:58 +0200 Subject: ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks The periph_clk2_sel mux can be set to pll3, osc/pll1_ref_clk, or osc/ pll2_burn_in_clk. The periph2_clk2_sel mux can be set to pll3 or pll2. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 151259003086..ca1717135820 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); -- cgit From 0e574461c4c915a065dd75c894edb653ce99be9c Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 22 Apr 2013 08:00:34 +0200 Subject: ARM i.MX6: correct MLB clock configuration According to the i.MX6 Dual/Quad technical reference manual (Figure 18-2. Clock Tree - Part 1) the MLB clock is directly feed by the AXI_CLK_ROOT. This is called 'axi' in our code. Note that the clock of the MLB IP block on the i.MX6 is completely independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible for feeding the MLB IP block with a clock. Instead, it's used internally by the MLB module to sync the bus clock in case the MLB 6-pin interface is enabled: MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN: 1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case. I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed for clocking the MLB module itself. Signed-off-by: Dirk Behme CC: Jiada Wang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ca1717135820..f2e1c62cf3ce 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); -- cgit From 087bb28329f3ccda4e50cb4cf297542d7e773e20 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 16 Apr 2013 22:11:19 +0800 Subject: ARM: imx: replicate the diagnostic register of boot cpu into secondary cores The diagnostic register holds the errata bits. Mostly bootloader does not bring up secondary cores, so that when errata bits are set in bootloader, they are set only for boot cpu. But on a SMP configuration, it should be equally done on every single core. Set up the diagnostic register for secondary cores by replicating the register from boot cpu. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/headsmp.S | 12 ++++++++++++ arch/arm/mach-imx/platsmp.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcafe..627f16f0e9d1 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65e..c6e1ab544882 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { -- cgit From de78a23d73ba7f1d08f3e1aeaa0a03cb912c62a0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 3 May 2013 10:55:46 +0800 Subject: ARM: imx: fix typo in gpu3d_shader_sels There is no clock pll2_pfd9_720m. Instead it should be pll3_pfd0_720m. Fix the typo in gpu3d_shader_sels. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f2e1c62cf3ce..dda9a2bd3acb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -186,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -- cgit From d34c671debe3d327424a9951a5c3a81065d0474d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 18 Apr 2013 22:44:29 +0200 Subject: ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 4 +++- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ecf..f0895c581a89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726a..078ed7f618d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; -- cgit From be3cd268d1d1837aaed937c2fc85b3d39d2f1b50 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 9 Apr 2013 23:26:18 +0200 Subject: ARM: mvebu: do not duplicate the mpic alias The mpic alias is already defined in the common armada-370-xp.dtsi, so there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi level. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 2 +- arch/arm/boot/dts/armada-xp.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5af9749..0c9130b6fb80 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -43,7 +43,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11c10dc..5b902f9a3af2 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; -- cgit From 99e11334dcb846f9b76fb808196c7f47aa83abb3 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sun, 21 Apr 2013 17:14:00 +0100 Subject: Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Cc: # v2.6.36.x Signed-off-by: Martin Michlmayr Tested-by: Marek Vasut Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/ts219-setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff90228..e1267d6b468f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } -- cgit From 7c14068f5a08d57d5ea98ef3668218e654617095 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 10 May 2013 22:12:27 +0200 Subject: ARM: plat-orion: add missing ehci include to common.h Removing orion ehci include from board files will raise a compiler error because plat/common.h is using an enum provided by orion ehci but not including the include itself. This just adds the missing include. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/plat-orion/include/plat/common.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5fefa14..d9a24f605a2b 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include +#include struct dsa_platform_data; struct mv_sata_platform_data; -- cgit From 00ed4a0bd964555fe9276f2299564c384d50ae7d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 13 May 2013 12:22:53 -0300 Subject: ARM: mvebu: Add a ranges entry to translate devbus childs With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c46159..46b785064dd8 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit From 6d31727a0b6fe7206725c93508e6d2065f16ff03 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 13 May 2013 19:32:14 +0000 Subject: ARM: Orion: Remove redundant init_dma_coherent_pool_size() The patch: 387870f mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls makes these calls on Kirkwood and Orion5x redundant. The drivers are not making atomic requests for coherent memory and hence the default pool size is now sufficient. Jason Cooper added mach-mvebu/ hunk, and corrected minor typos in commit message. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/common.c | 6 ------ arch/arm/mach-mvebu/armada-370-xp.c | 7 ------- arch/arm/mach-orion5x/common.c | 7 ------- 3 files changed, 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69e6d2b..f38922897563 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3087e2..1c48890bb72b 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -53,13 +53,6 @@ void __init armada_370_xp_init_early(void) { char *mbus_soc_name; - /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd672e89d..f8a6db9239bf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) -- cgit From d6ffe1b8ecc59ae23524e408063dc7725f485f96 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 13 May 2013 22:13:59 +0200 Subject: avr32: move NODES_SHIFT into Kconfig and delete numnodes.h This patch moves the NODES_SHIFT symbol into Kconfig to synchronize AVR32 architecture with the current kernel. The global header files do longer use the value from numnodes.h. See commit c80d79d746cc48bd94b0ce4f6d4f3c90cd403aaf for details. Signed-off-by: Paul Bolle Signed-off-by: Hans-Christian Egtvedt --- arch/avr32/Kconfig | 5 +++++ arch/avr32/include/asm/numnodes.h | 7 ------- 2 files changed, 5 insertions(+), 7 deletions(-) delete mode 100644 arch/avr32/include/asm/numnodes.h (limited to 'arch') diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 22c40308360b..ba4d40569f9e 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -208,6 +208,11 @@ config ARCH_DISCONTIGMEM_ENABLE config ARCH_SPARSEMEM_ENABLE def_bool n +config NODES_SHIFT + int + default "2" + depends on NEED_MULTIPLE_NODES + source "mm/Kconfig" config OWNERSHIP_TRACE diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h deleted file mode 100644 index 0b864d7ce330..000000000000 --- a/arch/avr32/include/asm/numnodes.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_AVR32_NUMNODES_H -#define __ASM_AVR32_NUMNODES_H - -/* Max 4 nodes */ -#define NODES_SHIFT 2 - -#endif /* __ASM_AVR32_NUMNODES_H */ -- cgit From e68c636d88db3fda74e664ecb1a213ae0d50a7d8 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 13 May 2013 22:22:10 +0200 Subject: avr32: fix relocation check for signed 18-bit offset Caught by static code analysis by David. Reported-by: David Binderman Signed-off-by: Hans-Christian Egtvedt Cc: stable@kernel.org --- arch/avr32/kernel/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c index 596f7305d93f..2c9412908024 100644 --- a/arch/avr32/kernel/module.c +++ b/arch/avr32/kernel/module.c @@ -264,7 +264,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; case R_AVR32_GOT18SW: if ((relocation & 0xfffe0003) != 0 - && (relocation & 0xfffc0003) != 0xffff0000) + && (relocation & 0xfffc0000) != 0xfffc0000) return reloc_overflow(module, "R_AVR32_GOT18SW", relocation); relocation >>= 2; -- cgit From 3210c05327e2b44b3bf96bab550d72cdb18b64e4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:01 +0100 Subject: ARM: ux500: Remove duplicated assignment of ab8500_platdata Since: "05ec260 mfd: db8500-prcmu: update resource passing", the AB8500's platform data 'ab8500_platdata' is passed directly as an attribute to 'db8500_prcmu_pdata', so there's no requirement to assign it a second time. In fact, it's only due to an ordering issue that the entire 'db8500_prcmu_pdata' data structure isn't completely over-written by the assignment in u8500_init_devices(). Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 6 +++--- arch/arm/mach-ux500/cpu-db8500.c | 4 +--- arch/arm/mach-ux500/setup.h | 2 +- 3 files changed, 5 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555ac6d0a..78389de94dde 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -623,7 +623,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -660,7 +660,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab23b6d..8894327283e1 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b49372..cad3ca86c540 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); -- cgit From ea63a11027103372f56bd2d9ee3c525be6edc9c1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:05 +0100 Subject: ARM: ux500: Fix incorrect DEBUG UART virtual addresses A recent move to rid header files which were hindering multiplatform support forced address allocations out of the headers and into the files which were using them. We also lost some useful macros such as IO_ADDRESS(), so physical -> virtual addressing has been carried out manually in this case. Unfortunately the incorrect value was converted. This patch rectifies the error and ensures earlyprintk works again. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/include/debug/ux500.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b62..fbd24beeb1fa 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif -- cgit From 7d2b64f9832d7cb971141703219b3dc495bb9332 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:06 +0100 Subject: ARM: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. Since on a non-DT boot the ethernet will be named "smsc911x.0" and since the clocks are not converted to device tree these names need to be matched when providing the name from auxdata. Signed-off-by: Lee Jones [edited commit message] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8894327283e1..46cca52890bc 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -276,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), -- cgit From 9349d00fc3ff2b110dc07d9f5d06abfeac300c19 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 7 May 2013 22:06:57 +0200 Subject: ARM: at91/trivial: fix model name for SAM9X25-EK Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ --- arch/arm/boot/dts/at91sam9x25ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e7..315250b4995e 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -11,7 +11,7 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { -- cgit From 5ade7e4214b43e9b934202d892e3d7c131617908 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 May 2013 15:14:49 +0200 Subject: ARM: at91/trivial: typo in GEM compatible string Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea51cce..5fce96b1cee4 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -156,7 +156,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 4 3>; pinctrl-names = "default"; -- cgit From 3f81127293284da449942a0144b9747c5db1e523 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 24 Apr 2013 15:56:48 +0200 Subject: ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module Instead of requesting all available spi cs-gpios, request only the ones used on the board, in our case on the cpu module. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d3.dtsi | 10 ---------- arch/arm/boot/dts/sama5d3xcm.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5fce96b1cee4..5000e0d42849 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,11 +75,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -203,11 +198,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626c..b336e7787cb3 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; -- cgit From 7d19273cd0408f8520539d5d6b1f695cd311b109 Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Fri, 10 May 2013 16:05:50 +0200 Subject: ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism The TB10x platform port includes a custom mechanism using to set up default pin controller configurations using abilis,simple-default pin configurations of nodes compatible with abilis,simple-pinctrl. This mechanism is redundant with the Linux standard "default" pin configuration, see commit ab78029ecc347debbd737f06688d788bd9d60c1d "drivers/pinctrl: grab default handles from device core". This patch removes the TB10x custom mechanism in favour of the Linux standard. Signed-off-by: Christian Ruppert Reviewed-by: Stephen Warren Reviewed-by: Linus Walleij Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/abilis_tb100_dvk.dts | 2 +- arch/arc/boot/dts/abilis_tb101_dvk.dts | 2 +- arch/arc/boot/dts/abilis_tb10x.dtsi | 6 ++---- arch/arc/plat-tb10x/tb10x.c | 26 -------------------------- 4 files changed, 4 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index c0fd3623c393..0fa0d4abe795 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index 6f8c381f6268..a4d80ce283ae 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index a6139fc5aaa3..b97e3051ba4b 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -88,8 +88,7 @@ }; uart@FF100000 { - compatible = "snps,dw-apb-uart", - "abilis,simple-pinctrl"; + compatible = "snps,dw-apb-uart"; reg = <0xFF100000 0x100>; clock-frequency = <166666666>; interrupts = <25 1>; @@ -184,8 +183,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - compatible = "abilis,tb100-spi", - "abilis,simple-pinctrl"; + compatible = "abilis,tb100-spi"; num-cs = <2>; reg = <0xFE011000 0x20>; interrupt-parent = <&tb10x_ictl>; diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c index d3567691c7e1..06cb30929460 100644 --- a/arch/arc/plat-tb10x/tb10x.c +++ b/arch/arc/plat-tb10x/tb10x.c @@ -34,31 +34,6 @@ static void __init tb10x_platform_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init tb10x_platform_late_init(void) -{ - struct device_node *dn; - - /* - * Pinctrl documentation recommends setting up the iomux here for - * all modules which don't require control over the pins themselves. - * Modules which need this kind of assistance are compatible with - * "abilis,simple-pinctrl", i.e. we can easily iterate over them. - * TODO: Does this recommended method work cleanly with pins required - * by modules? - */ - for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") { - struct platform_device *pd = of_find_device_by_node(dn); - struct pinctrl *pctl; - - pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default"); - if (IS_ERR(pctl)) { - int ret = PTR_ERR(pctl); - dev_err(&pd->dev, "Could not set up pinctrl: %d\n", - ret); - } - } -} - static const char *tb10x_compat[] __initdata = { "abilis,arc-tb10x", NULL, @@ -67,5 +42,4 @@ static const char *tb10x_compat[] __initdata = { MACHINE_START(TB10x, "tb10x") .dt_compat = tb10x_compat, .init_machine = tb10x_platform_init, - .init_late = tb10x_platform_late_init, MACHINE_END -- cgit From 19a280a61b520febab0f2fde94f4bd50250377b2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 12 May 2013 15:06:51 +0200 Subject: ARM: sunxi: select ARCH_REQUIRE_GPIOLIB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_ARCH_SUNXI currently doesn't enable a gpiolib, which causes build problems when building a kernel with only the sunxi platform enabled. Select ARCH_REQUIRE_GPIOLIB to solve this. Signed-off-by: Maxime Ripard Tested-by: Emilio López --- arch/arm/mach-sunxi/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c782d742..5b045e302b43 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK -- cgit From b7a8ca5173ef9aa55fa039d7c216426ff0b25a12 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 15 May 2013 12:12:33 +0200 Subject: ARM: at91: rm9200 fix time support since commit 838a2ae80a6ab52139fb1bf0a93ea8c5eff94488 Author: Shawn Guo Date: Sat Jan 12 11:50:05 2013 +0000 ARM: use clockevents_config_and_register() where possible The timer is wrongly configured and result in a nice crash so revert it on rm9200 timer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable # 3.8+ Cc: Shawn Guo Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_time.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1dfe..180b3024bec3 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -- cgit From 74ba4ec7a2036f9dbe5fcc85c7c737222005507f Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 15 May 2013 09:36:41 -0300 Subject: ARM: ux500: select REGULATOR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MACH_MOP500 selects REGULATOR_FIXED_VOLTAGE but not REGULATOR. This patch makes it select the latter too. Seen as: warning: (MACH_DOVE_DT && ARCH_KIRKWOOD_DT && MACH_AMS_DELTA && MACH_MOP500 && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Emilio López Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e39df8..b19b07204aaf 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 -- cgit From 98f541c6e390d48643047e0924da8ccc10bb1598 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 1 May 2013 12:13:54 -0400 Subject: USB: remove remaining instances of USB_SUSPEND Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- arch/arm/configs/omap1_defconfig | 1 - arch/arm/configs/omap2plus_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1235_defconfig | 1 - arch/mips/configs/lemote2f_defconfig | 1 - arch/powerpc/configs/ps3_defconfig | 1 - 6 files changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb64a7f9..9940f7b4e438 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -199,7 +199,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5abd..435d69b83e32 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -204,7 +204,6 @@ CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index face9d26e6d5..bac26b971c5e 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -228,7 +228,6 @@ CONFIG_HIDRAW=y CONFIG_USB_HID=y CONFIG_USB_SUPPORT=y CONFIG_USB=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig index 14752dde7540..e2b4ad55462f 100644 --- a/arch/mips/configs/db1235_defconfig +++ b/arch/mips/configs/db1235_defconfig @@ -344,7 +344,6 @@ CONFIG_UHID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index b6acd2f256b6..343bebc4b63b 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -300,7 +300,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index f79196232917..139a8308070c 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m CONFIG_USB_HIDDEV=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set -- cgit From 304e71e0ad4125c29a0731491b75c3b83530d616 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 May 2013 20:28:15 -0700 Subject: ARM: dts: Fix musb interrupt for device tree booting Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404da1c0d..99ba6e14ebf3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; -- cgit From 0f497039276fa2ca2ca324236848bb15c8c775dc Mon Sep 17 00:00:00 2001 From: jean-philippe francois Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix __init section mismatch for _enable_preprogram _enable_preprogram is marked as __init, but is called from _enable which is not. Without this patch, the board oopses after init. Tested on custom hardware and on beagle board xM. Otherwise we can get: Unable to handle kernel paging request at virtual address 000b0012 pgd = cf968000 *pgd=8fb06831, *pte=00000000, *ppte=00000000 PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.9.0 #2) PC is at _enable_preprogram+0x1c/0x24 LR is at omap_hwmod_enable+0x34/0x60 psr: 80000093 sp : cf95de08 ip : 00002de5 fp : bec33d4c r10: 00000000 r9 : 00000002 r8 : b6dd2c78 r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000 r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f968019 DAC: 00000015 Process otpcmd (pid: 607, stack limit = 0xcf95c230) Stack: (0xcf95de08 to 0xcf95e000) de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840 de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10 de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664 de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4 de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000 dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001 dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980 dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504 df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60 df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000 df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003 df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00 df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036 dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18 dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000 (_omap_device_enable_hwmods+0x20/0x34) (omap_device_enable+0x3c/0x50) (_od_runtime_resume+0x10/0x1c) (__rpm_callback+0x54/0x98) (rpm_callback+0x64/0x7c) (rpm_resume+0x434/0x554) (__pm_runtime_resume+0x48/0x74) (omap_i2c_xfer+0x28/0xe8) (__i2c_transfer+0x3c/0x78) (i2c_transfer+0x6c/0xc0) (i2c_master_send+0x38/0x48) (sha204p_send_command+0x60/0x9c) (sha204c_send_and_receive+0x5c/0x1e0) (sha204m_read+0x94/0xa0) (otp_do_read+0x50/0xa4) (vfs_ioctl+0x24/0x40) (do_vfs_ioctl+0x1b0/0x1c0) (sys_ioctl+0x38/0x54) (ret_fast_syscall+0x0/0x30) Code: e1a08002 ea000009 e598003c e592c05c (e7904003) Cc: stable@vger.kernel.org Signed-off-by: Jean-Philippe Fran=C3=A7ois Acked-by: Kevin Hilman [tony@atomide.com: updated description with oops] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..e3289888adfa 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2065,7 +2065,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; -- cgit From a8b09c52a66e801d87704cfebf57958b1991ab86 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix error return code in omap1_system_dma_init() Fix to return -ENOMEM in the d->chan alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/dma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858e27b7..a94b3a718d1a 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } -- cgit From a545ec160afea245939290e7f616f68de906a85c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5abd..f59090210ec9 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -- cgit From c6c003af0b91bb8722dbf2a8683cd40532e12079 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 17 May 2013 08:09:57 -0300 Subject: ARM: mvebu: Fix ranges entry on XP GP board With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. This patch fixes the ranges property on the Armada XP GP board. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-gp.dts | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06fc147e..3ee63d128e27 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit From a6d25f4c951b8b28f2eaec6f891ff834622532f2 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 27 Mar 2013 15:34:26 +0530 Subject: ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock It is required to enable respective clock-domain before enabling any clock/module inside that clock-domain. During common-clock migration, .clkdm_name field got missed for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm" unused; so it will be disabled even if childs of this clock-domain is enabled, which keeps child modules in idle mode. This fixes the kernel crash observed on AM335xEVM-SK platform, where clkdiv32_ick clock is being used as a gpio debounce clock and since clkdiv32k_ick is in idle mode it leads to below crash - Crash Log: ========== [ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ac150 [ 2.606434] Internal error: : 1028 [#1] SMP ARM [ 2.611207] Modules linked in: [ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4) [ 2.620973] PC is at _set_gpio_debounce+0x60/0x104 [ 2.626025] LR is at clk_enable+0x30/0x3c Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Vaibhav Hiremath Cc: Rajendra Nayak Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cclock33xx_data.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3e..af3544ce4f02 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, -- cgit From 8b9232141bf40788cce31f893c13f344ec31ee66 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 May 2013 17:02:59 +0200 Subject: MIPS: Rewrite pfn_valid to work in modules, too. This fixes: MODPOST 393 modules ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined! make[3]: *** [__modpost] Error 1 It would have been possible to just export min_low_pfn but in the end pfn_valid should return 1 for any pfn argument for which a struct page exists so using min_low_pfn was wrong anyway. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index ec1ca537fbc1..f59552fae917 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -171,14 +171,13 @@ typedef struct { unsigned long pgprot; } pgprot_t; #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn); \ - /* avoid include hell */ \ - extern unsigned long min_low_pfn; \ - \ - __pfn >= min_low_pfn && __pfn < max_mapnr; \ -}) +static inline int pfn_valid(unsigned long pfn) +{ + /* avoid include hell */ + extern unsigned long max_mapnr; + + return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr; +} #elif defined(CONFIG_SPARSEMEM) -- cgit From c689cbac25b4fce2f3d7de2e4dd6678caeebdcb8 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 17 May 2013 14:25:03 +0200 Subject: ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series when he introduced the gpiolib support for mvebu: 93a59cf arm: mvebu: use GPIO support now that a driver is available This commit was written to be applied for the ARCH_MVEBU which was located in arch/arm/KConfig and was merged in 3.7. In the same time Rob Herring moved the ARCH_MVEBU block to arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7: 387798b ARM: initial multiplatform support Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this migration. This was not noticed until the v3.10-rc1, because mvebu as part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and this architect selected ARCH_REQUIRE_GPIOLIB. Since the following commit from Arnd: "883a106 ARM: default machine descriptor for multiplatform", ARCH_VEXPRESS was then no more selected by default with ARCH_MVEBU and it made appeared the lack of ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb0a46d..80a8bcacd9d5 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU -- cgit From 8eed481e6fe2c28c2a579ada0c8ba5cbad45bf2c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 May 2013 17:55:16 +0200 Subject: arm: mvebu: fix the 'ranges' property to handle PCIe Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use the range property') all the device nodes of Armada 370/XP are under a common 'ranges' property that translates the device register addresses into their absolute address, thanks to the base address of the internal register space. However, beyond just the register areas, there are also PCIe I/O and memory regions, whose addresses should be properly translated. This patch fixes the Armada 370 and XP ranges property to take PCIe into account properly. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 3 ++- arch/arm/boot/dts/armada-370.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc65fab0..550eb772c30e 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 0c9130b6fb80..a1a870364dd8 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; -- cgit From 35513171eed4d7245e81d926d311e74f3dca06f3 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:37 +0530 Subject: ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() _enable_sysc() and _idle_sysc() handle the midle mode programming correctly and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively for supported IPs (The ones which support hardware controlled midle modes) However the same programming logic is missing when it comes to sidle mode programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the ones which support hardware controlled sidle modes) This problem was hidden due to the fact that a call to _enable_wakeup() in those same functions would overwrite the idlemodes and program them correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases) So fix the sidlemode handling correctly in these functions and handle the _enable_wakeup() for SIDLEMODE supported IPs same as the way its handled for MIDLEMODE supported ones. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 42 ++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..c28552bfeb8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,26 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1404,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1439,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1467,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } -- cgit From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:38 +0530 Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active Some IPs (like UART) need the sidle mode to be controlled in SW only while they are active. Once they go inactive, they need the IP to be put back in HW control so they are also wakeup capable. The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle mode to be *always* controlled in SWSUP. We now have a need to control IPs sidle mode in SWSUP only while its active. So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework know about these new IP requirements. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- arch/arm/mach-omap2/omap_hwmod.h | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c28552bfeb8d..5739429894b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,7 +1356,8 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_SIDLE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f07..8498774b5fb1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions -- cgit From 66dde54e978a310c57a40023ff39835fa5ccd7a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:39 +0530 Subject: ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes OMAP UART IP needs software control for slave idle modes based on functional state of the IP. i.e The IP slave idle settings should be set to 'noidle' when being used and then put back to 'smart_idle' when unused. Currently this is handled by the driver with function pointers implemented in platform code. This however breaks in case of device tree because of missing idle handling APIs. Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which takes care of the mentioned requirement. Hence add the flag for all UART IPs to take advantage of feature supported by framework. Subsequent patches removes the slave idle handling from driver code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 3 +++ arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++++- 4 files changed, 18 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1acc..d05fc7b54567 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450a..075f7cc51026 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1da..31c7126eb3bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0d..848b6dc67590 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", -- cgit From e59cd225c0ad280122cb69e04cd66699557875a4 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:40 +0530 Subject: ARM: OMAP2+: serial: Remove the un-used slave idle hooks UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly and OMAP serial driver is also cleaned up accordingly. So remove the un-used slave idle platforms hooks now. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/serial.c | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e912..f6601563aa69 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; -- cgit From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:42 +0530 Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 68 ---------------------------------------- arch/arm/mach-omap2/omap_hwmod.h | 3 -- 2 files changed, 71 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5739429894b0..03931425029b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2254,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - /** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * @@ -3188,38 +3152,6 @@ error: return ret; } -/** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - /** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8498774b5fb1..0c898f58ac9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -- cgit From f3f011750a18abc389ef1b0d504fbeeacf641919 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 20 May 2013 10:20:21 -0600 Subject: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko Signed-off-by: Bjorn Helgaas --- arch/x86/pci/mrst.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c index 0e0fabf17342..6eb18c42a28a 100644 --- a/arch/x86/pci/mrst.c +++ b/arch/x86/pci/mrst.c @@ -141,11 +141,6 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, */ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) { - if (bus == 0 && (devfn == PCI_DEVFN(2, 0) - || devfn == PCI_DEVFN(0, 0) - || devfn == PCI_DEVFN(3, 0))) - return 1; - /* This is a workaround for A0 LNC bug where PCI status register does * not have new CAP bit set. can not be written by SW either. * @@ -155,7 +150,10 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) */ if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) return 0; - + if (bus == 0 && (devfn == PCI_DEVFN(2, 0) + || devfn == PCI_DEVFN(0, 0) + || devfn == PCI_DEVFN(3, 0))) + return 1; return 0; /* langwell on others */ } -- cgit From 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sun, 19 May 2013 22:12:43 +0200 Subject: ARM: plat-orion: Fix num_resources and id for ge10 and ge11 When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT Acked-by: Andrew Lunn Cc: # v3.0.x Signed-off-by: Jason Cooper --- arch/arm/plat-orion/common.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827271e9..c019b7aaf776 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), -- cgit From 489e138eec96f529c5e8d4cd3ea45882ecdbf5ca Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 20 May 2013 16:13:27 +0200 Subject: ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node During the conversion to the internal-regs' subnode, the L2-cache node haven not been converted (due to a wrong choice made by myself during the resolution of the merge conflict when I rebased the commit). This leads to wrong address for L2 cache which prevent it to be used on Armada 370. This commit fix the address reg of the e L2-cache node. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index a1a870364dd8..aee2b1866ce2 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -39,7 +39,7 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; -- cgit From 9f8466c6e09e62a1d047f2e57d90cd42e46b35c1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 17 May 2013 08:44:17 +0100 Subject: ARM: vt8500: Add missing NULL terminator in dt_compat When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it failed to boot. The issues seems to be changing by enabling or disabling VT8550 platform. Having a quick look at dt_compat list, it seems to miss a NULL terminator, which means of_flat_dt_match will compat check will cross the boundary of dt_compat and fault at some point , which is what was happening in my case. Without this patch if we try to boot multi_v7_defconfig you might notice that some of the platforms might fault if they fall after vt8500 in machine-desc list. Other platforms which fall before vt8500 in mdesc list will not fault. Signed-off-by: Srinivas Kandagatla Acked-by: Tony Prisk Signed-off-by: Olof Johansson --- arch/arm/mach-vt8500/vt8500.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 1dd281efc020..f5c33df7a597 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") -- cgit From b98da4db297bad34a5577df36ff4cb2a8fc90923 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 19 May 2013 00:47:39 +0200 Subject: ARM: nomadik: fix IRQ assignment for SMC ethernet The assignment of IRQ for the SMC91x ethernet adapter had two problems making it non-working: - It was not put into the ethernet device node. Let's do this by using the board-specific overlay, so we can make other overlays on other Nomadik boards. - The IRQ number was actually completely wrong, this was the number for NHK8815, not S8815. After this ethernet starts working on the USB S8815. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e3..6f82d9368948 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { -- cgit From 8d9849b05154ff6f19f538c2d094ea0f32981bb0 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Mon, 20 May 2013 13:07:19 -0600 Subject: ARM: tegra: defconfig fixes The AK8975 Kconfig option was renamed during the 3.10 merge window. Adjust tegra_defconfig to enable the new name, so it's not missing useful features. Tegra DRM support used to be enabled in the default Tegra configuration, but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default. Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again. Signed-off-by: Alexandre Courbot [swarren, squashed Alex's and my changes together] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/configs/tegra_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133cf..f7ba316164d4 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y -- cgit From 1a461c5bdcc815280fa5f51e3775bc05ed98af13 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 16:26:22 +0200 Subject: MIPS: clock.h: Remove declaration of cpu_wait. Duplicate and has no business in this header file. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/clock.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h index c9456e7a7283..778e32d817bc 100644 --- a/arch/mips/include/asm/clock.h +++ b/arch/mips/include/asm/clock.h @@ -6,8 +6,6 @@ #include #include -extern void (*cpu_wait) (void); - struct clk; struct clk_ops { -- cgit From 49f2ec91e14ce9bb20fdac88a38243129f3261c3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:53:37 +0200 Subject: MIPS: Consolidate idle loop / WAIT instruction support in a single file. Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 2 +- arch/mips/kernel/cpu-probe.c | 198 ------------------------------------ arch/mips/kernel/idle.c | 232 +++++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/process.c | 13 --- 4 files changed, 233 insertions(+), 212 deletions(-) create mode 100644 arch/mips/kernel/idle.c (limited to 'arch') diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 6ad9e04bdf62..423d871a946b 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o vmlinux.lds -obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ +obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \ prom.o ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o vdso.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 4bbffdb9024f..c6568bf4b1b0 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -27,105 +27,6 @@ #include #include -/* - * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, - * the implementation of the "wait" feature differs between CPU families. This - * points to the function that implements CPU specific wait. - * The wait instruction stops the pipeline and reduces the power consumption of - * the CPU very much. - */ -void (*cpu_wait)(void); -EXPORT_SYMBOL(cpu_wait); - -static void r3081_wait(void) -{ - unsigned long cfg = read_c0_conf(); - write_c0_conf(cfg | R30XX_CONF_HALT); -} - -static void r39xx_wait(void) -{ - local_irq_disable(); - if (!need_resched()) - write_c0_conf(read_c0_conf() | TX39_CONF_HALT); - local_irq_enable(); -} - -extern void r4k_wait(void); - -/* - * This variant is preferable as it allows testing need_resched and going to - * sleep depending on the outcome atomically. Unfortunately the "It is - * implementation-dependent whether the pipeline restarts when a non-enabled - * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes - * using this version a gamble. - */ -void r4k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); - local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); -} - -/* - * The RM7000 variant has to handle erratum 38. The workaround is to not - * have any pending stores when the WAIT instruction is executed. - */ -static void rm7k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__( - " .set push \n" - " .set mips3 \n" - " .set noat \n" - " mfc0 $1, $12 \n" - " sync \n" - " mtc0 $1, $12 # stalls until W stage \n" - " wait \n" - " mtc0 $1, $12 # stalls until W stage \n" - " .set pop \n"); - local_irq_enable(); -} - -/* - * The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. - * alchemy/common/time.c may override cpu_wait! - */ -static void au1k_wait(void) -{ - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); -} - -static int __initdata nowait; - -static int __init wait_disable(char *s) -{ - nowait = 1; - - return 1; -} - -__setup("nowait", wait_disable); - static int __cpuinitdata mips_fpu_disabled; static int __init fpu_disable(char *s) @@ -150,105 +51,6 @@ static int __init dsp_disable(char *s) __setup("nodsp", dsp_disable); -void __init check_wait(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - if (nowait) { - printk("Wait instruction disabled.\n"); - return; - } - - switch (c->cputype) { - case CPU_R3081: - case CPU_R3081E: - cpu_wait = r3081_wait; - break; - case CPU_TX3927: - cpu_wait = r39xx_wait; - break; - case CPU_R4200: -/* case CPU_R4300: */ - case CPU_R4600: - case CPU_R4640: - case CPU_R4650: - case CPU_R4700: - case CPU_R5000: - case CPU_R5500: - case CPU_NEVADA: - case CPU_4KC: - case CPU_4KEC: - case CPU_4KSC: - case CPU_5KC: - case CPU_25KF: - case CPU_PR4450: - case CPU_BMIPS3300: - case CPU_BMIPS4350: - case CPU_BMIPS4380: - case CPU_BMIPS5000: - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: - case CPU_CAVIUM_OCTEON2: - case CPU_JZRISC: - case CPU_LOONGSON1: - case CPU_XLR: - case CPU_XLP: - cpu_wait = r4k_wait; - break; - - case CPU_RM7000: - cpu_wait = rm7k_wait_irqoff; - break; - - case CPU_M14KC: - case CPU_M14KEC: - case CPU_24K: - case CPU_34K: - case CPU_1004K: - cpu_wait = r4k_wait; - if (read_c0_config7() & MIPS_CONF7_WII) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_74K: - cpu_wait = r4k_wait; - if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_TX49XX: - cpu_wait = r4k_wait_irqoff; - break; - case CPU_ALCHEMY: - cpu_wait = au1k_wait; - break; - case CPU_20KC: - /* - * WAIT on Rev1.0 has E1, E2, E3 and E16. - * WAIT on Rev2.0 and Rev3.0 has E16. - * Rev3.1 WAIT is nop, why bother - */ - if ((c->processor_id & 0xff) <= 0x64) - break; - - /* - * Another rev is incremeting c0_count at a reduced clock - * rate while in WAIT mode. So we basically have the choice - * between using the cp0 timer as clocksource or avoiding - * the WAIT instruction. Until more details are known, - * disable the use of WAIT for 20Kc entirely. - cpu_wait = r4k_wait; - */ - break; - case CPU_RM9000: - if ((c->processor_id & 0x00ff) >= 0x40) - cpu_wait = r4k_wait; - break; - default: - break; - } -} - static inline void check_errata(void) { struct cpuinfo_mips *c = ¤t_cpu_data; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c new file mode 100644 index 000000000000..1e9d9383d49f --- /dev/null +++ b/arch/mips/kernel/idle.c @@ -0,0 +1,232 @@ +/* + * MIPS idle loop and WAIT instruction support. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, + * the implementation of the "wait" feature differs between CPU families. This + * points to the function that implements CPU specific wait. + * The wait instruction stops the pipeline and reduces the power consumption of + * the CPU very much. + */ +void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); + +static void r3081_wait(void) +{ + unsigned long cfg = read_c0_conf(); + write_c0_conf(cfg | R30XX_CONF_HALT); +} + +static void r39xx_wait(void) +{ + local_irq_disable(); + if (!need_resched()) + write_c0_conf(read_c0_conf() | TX39_CONF_HALT); + local_irq_enable(); +} + +extern void r4k_wait(void); + +/* + * This variant is preferable as it allows testing need_resched and going to + * sleep depending on the outcome atomically. Unfortunately the "It is + * implementation-dependent whether the pipeline restarts when a non-enabled + * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes + * using this version a gamble. + */ +void r4k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__(" .set push \n" + " .set mips3 \n" + " wait \n" + " .set pop \n"); + local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); +} + +/* + * The RM7000 variant has to handle erratum 38. The workaround is to not + * have any pending stores when the WAIT instruction is executed. + */ +static void rm7k_wait_irqoff(void) +{ + local_irq_disable(); + if (!need_resched()) + __asm__( + " .set push \n" + " .set mips3 \n" + " .set noat \n" + " mfc0 $1, $12 \n" + " sync \n" + " mtc0 $1, $12 # stalls until W stage \n" + " wait \n" + " mtc0 $1, $12 # stalls until W stage \n" + " .set pop \n"); + local_irq_enable(); +} + +/* + * The Au1xxx wait is available only if using 32khz counter or + * external timer source, but specifically not CP0 Counter. + * alchemy/common/time.c may override cpu_wait! + */ +static void au1k_wait(void) +{ + __asm__(" .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" + : : "r" (au1k_wait)); +} + +static int __initdata nowait; + +static int __init wait_disable(char *s) +{ + nowait = 1; + + return 1; +} + +__setup("nowait", wait_disable); + +void __init check_wait(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + if (nowait) { + printk("Wait instruction disabled.\n"); + return; + } + + switch (c->cputype) { + case CPU_R3081: + case CPU_R3081E: + cpu_wait = r3081_wait; + break; + case CPU_TX3927: + cpu_wait = r39xx_wait; + break; + case CPU_R4200: +/* case CPU_R4300: */ + case CPU_R4600: + case CPU_R4640: + case CPU_R4650: + case CPU_R4700: + case CPU_R5000: + case CPU_R5500: + case CPU_NEVADA: + case CPU_4KC: + case CPU_4KEC: + case CPU_4KSC: + case CPU_5KC: + case CPU_25KF: + case CPU_PR4450: + case CPU_BMIPS3300: + case CPU_BMIPS4350: + case CPU_BMIPS4380: + case CPU_BMIPS5000: + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: + case CPU_JZRISC: + case CPU_LOONGSON1: + case CPU_XLR: + case CPU_XLP: + cpu_wait = r4k_wait; + break; + + case CPU_RM7000: + cpu_wait = rm7k_wait_irqoff; + break; + + case CPU_M14KC: + case CPU_M14KEC: + case CPU_24K: + case CPU_34K: + case CPU_1004K: + cpu_wait = r4k_wait; + if (read_c0_config7() & MIPS_CONF7_WII) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_74K: + cpu_wait = r4k_wait; + if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_TX49XX: + cpu_wait = r4k_wait_irqoff; + break; + case CPU_ALCHEMY: + cpu_wait = au1k_wait; + break; + case CPU_20KC: + /* + * WAIT on Rev1.0 has E1, E2, E3 and E16. + * WAIT on Rev2.0 and Rev3.0 has E16. + * Rev3.1 WAIT is nop, why bother + */ + if ((c->processor_id & 0xff) <= 0x64) + break; + + /* + * Another rev is incremeting c0_count at a reduced clock + * rate while in WAIT mode. So we basically have the choice + * between using the cp0 timer as clocksource or avoiding + * the WAIT instruction. Until more details are known, + * disable the use of WAIT for 20Kc entirely. + cpu_wait = r4k_wait; + */ + break; + case CPU_RM9000: + if ((c->processor_id & 0x00ff) >= 0x40) + cpu_wait = r4k_wait; + break; + default: + break; + } +} + +void arch_cpu_idle(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + extern void smtc_idle_loop_hook(void); + + smtc_idle_loop_hook(); +#endif + if (cpu_wait) + (*cpu_wait)(); + else + local_irq_enable(); +} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index a682a87bcc04..c6a041d9d05d 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -51,19 +51,6 @@ void arch_cpu_idle_dead(void) } #endif -void arch_cpu_idle(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_idle_loop_hook(void); - - smtc_idle_loop_hook(); -#endif - if (cpu_wait) - (*cpu_wait)(); - else - local_irq_enable(); -} - asmlinkage void ret_from_fork(void); asmlinkage void ret_from_kernel_thread(void); -- cgit From 00baf8576c29c93a470bdfc98a5c121a49c2f34b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 12:47:26 +0200 Subject: MIPS: Idle: cleaup SMTC idle hook as per Linux coding style. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 1e9d9383d49f..28abda73126a 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -218,13 +218,18 @@ void __init check_wait(void) } } -void arch_cpu_idle(void) +static void smtc_idle_hook(void) { #ifdef CONFIG_MIPS_MT_SMTC - extern void smtc_idle_loop_hook(void); + void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); #endif +} + +void arch_cpu_idle(void) +{ + smtc_idle_hook(); if (cpu_wait) (*cpu_wait)(); else -- cgit From f91a148aa22b3808c12525ccc5779ff0ae6314a4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 12:58:08 +0200 Subject: MIPS: Idle: Consistently reformat inline assembler. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 28abda73126a..b33875bf699d 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -57,13 +57,15 @@ void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); + __asm__( + " .set push \n" + " .set mips3 \n" + " wait \n" + " .set pop \n"); local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); + __asm__( + " .globl __pastwait \n" + "__pastwait: \n"); } /* @@ -94,18 +96,19 @@ static void rm7k_wait_irqoff(void) */ static void au1k_wait(void) { - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); + __asm__( + " .set mips3 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set mips0 \n" + : : "r" (au1k_wait)); } static int __initdata nowait; -- cgit From c9b6869dbb3c6edb24e3cc76d3655067cfa7b802 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 13:02:12 +0200 Subject: MIPS: Idle: Make call of function pointer readable. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index b33875bf699d..36e79f528e89 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -234,7 +234,7 @@ void arch_cpu_idle(void) { smtc_idle_hook(); if (cpu_wait) - (*cpu_wait)(); + cpu_wait(); else local_irq_enable(); } -- cgit From fb40bc3e94933007d3e42e96daf1ec8044821cb8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 14:05:27 +0200 Subject: MIPS: Idle: Re-enable irqs at the end of r3081, au1k and loongson2 cpu_wait. Without this, the WARN_ON_ONCE(irqs_disabled()); in the idle loop will be triggered. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 36e79f528e89..78cc7d6fc845 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -34,6 +34,7 @@ static void r3081_wait(void) { unsigned long cfg = read_c0_conf(); write_c0_conf(cfg | R30XX_CONF_HALT); + local_irq_enable(); } static void r39xx_wait(void) @@ -109,6 +110,7 @@ static void au1k_wait(void) " nop \n" " .set mips0 \n" : : "r" (au1k_wait)); + local_irq_enable(); } static int __initdata nowait; -- cgit From d882f07a83642283b9bc4e7f4c56ac4982c5e629 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 14:14:48 +0200 Subject: MIPS: Idle: Don't call local_irq_disable() in cpu_wait() implementations. The generic idle loop has already disabled interrupts so this is redundant. Signed-off-by: Ralf Baechle --- arch/mips/kernel/idle.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 78cc7d6fc845..1f85dda03df4 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -39,7 +39,6 @@ static void r3081_wait(void) static void r39xx_wait(void) { - local_irq_disable(); if (!need_resched()) write_c0_conf(read_c0_conf() | TX39_CONF_HALT); local_irq_enable(); @@ -56,7 +55,6 @@ extern void r4k_wait(void); */ void r4k_wait_irqoff(void) { - local_irq_disable(); if (!need_resched()) __asm__( " .set push \n" @@ -75,7 +73,6 @@ void r4k_wait_irqoff(void) */ static void rm7k_wait_irqoff(void) { - local_irq_disable(); if (!need_resched()) __asm__( " .set push \n" -- cgit From bdc92d74e0ec95a8101447467c25f015105f2e5a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 16:59:19 +0200 Subject: MIPS: Idle: Consolidate all declarations in . Signed-off-by: Ralf Baechle --- arch/mips/alchemy/board-gpr.c | 1 + arch/mips/alchemy/common/time.c | 1 + arch/mips/ath79/setup.c | 1 + arch/mips/cobalt/reset.c | 1 + arch/mips/include/asm/idle.h | 11 +++++++++++ arch/mips/include/asm/processor.h | 1 - arch/mips/kernel/idle.c | 3 +-- arch/mips/kernel/proc.c | 1 + arch/mips/kernel/smp.c | 1 + arch/mips/kernel/smtc.c | 2 +- arch/mips/kernel/traps.c | 2 +- arch/mips/loongson/common/reset.c | 1 + arch/mips/loongson1/common/reset.c | 1 + arch/mips/netlogic/xlp/setup.c | 1 + arch/mips/netlogic/xlr/setup.c | 1 + arch/mips/pmcs-msp71xx/msp_setup.c | 1 + arch/mips/txx9/generic/setup.c | 1 + arch/mips/vr41xx/common/pmu.c | 1 + arch/mips/wrppmc/reset.c | 1 + 19 files changed, 28 insertions(+), 5 deletions(-) create mode 100644 arch/mips/include/asm/idle.h (limited to 'arch') diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index cb0f6afb7389..9edc35ff8cf1 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 38afb11ba2c4..93fa586d52e2 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index a0233a2c1988..8be4e856b8b8 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -19,6 +19,7 @@ #include #include +#include #include /* for mips_hpt_frequency */ #include /* for _machine_{restart,halt} */ #include diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 516b4428df4e..4eedd481dd00 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h new file mode 100644 index 000000000000..8b26ac5c854e --- /dev/null +++ b/arch/mips/include/asm/idle.h @@ -0,0 +1,11 @@ +#ifndef __ASM_IDLE_H +#define __ASM_IDLE_H + +#include + +extern void (*cpu_wait)(void); +extern asmlinkage void r4k_wait(void); +extern void r4k_wait_irqoff(void); +extern void __pastwait(void); + +#endif /* __ASM_IDLE_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 71686c897dea..1470b7b68b0e 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -28,7 +28,6 @@ /* * System setup and hardware flags.. */ -extern void (*cpu_wait)(void); extern unsigned int vced_count, vcei_count; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 1f85dda03df4..985cc02786e3 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* @@ -44,8 +45,6 @@ static void r39xx_wait(void) local_irq_enable(); } -extern void r4k_wait(void); - /* * This variant is preferable as it allows testing need_resched and going to * sleep depending on the outcome atomically. Unfortunately the "It is diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index a3e461408b7e..acb34373679e 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index c17619fe18e3..6e7862ab46cc 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 7186222dc5bb..46303bc61364 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -858,7 +859,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) unsigned long flags; int mtflags; unsigned long tcrestart; - extern void r4k_wait_irqoff(void), __pastwait(void); int set_resched_flag = (type == LINUX_SMP_IPI && action == SMP_RESCHEDULE_YOURSELF); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb14db3c5764..c6da4a905b98 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -57,7 +58,6 @@ #include extern void check_wait(void); -extern asmlinkage void r4k_wait(void); extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern u32 handle_tlbl[]; diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 35c8c6468494..65bfbb5d06f4 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c index d4f610f9604a..547f34b69e4c 100644 --- a/arch/mips/loongson1/common/reset.c +++ b/arch/mips/loongson1/common/reset.c @@ -9,6 +9,7 @@ #include #include +#include #include #include diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index af319143b591..eaa99d28cb8e 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -37,6 +37,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index e3e094100e3e..89c8c1066632 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c index 1651cfdbfe7b..396b2967ad85 100644 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ b/arch/mips/pmcs-msp71xx/msp_setup.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5364aabc2102..681e7f86c080 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 70a3f90131d8..d7f755833c3f 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/wrppmc/reset.c b/arch/mips/wrppmc/reset.c index cc5474b24f06..80beb188ed47 100644 --- a/arch/mips/wrppmc/reset.c +++ b/arch/mips/wrppmc/reset.c @@ -9,6 +9,7 @@ #include #include +#include #include #include -- cgit From f94d9a8ef9aebab5317d11fb1633ba14ad240983 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 17:30:36 +0200 Subject: MIPS: Idle: Do address fiddlery in helper functions. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/idle.h | 11 +++++++++++ arch/mips/kernel/smtc.c | 3 +-- arch/mips/kernel/traps.c | 7 +++---- 3 files changed, 15 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index 8b26ac5c854e..be6f807c1e3f 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -8,4 +8,15 @@ extern asmlinkage void r4k_wait(void); extern void r4k_wait_irqoff(void); extern void __pastwait(void); +static inline int using_rollback_handler(void) +{ + return cpu_wait == r4k_wait; +} + +static inline int address_is_in_r4k_wait_irqoff(unsigned long addr) +{ + return addr >= (unsigned long)r4k_wait_irqoff && + addr < (unsigned long)__pastwait; +} + #endif /* __ASM_IDLE_H */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 46303bc61364..75a4fd709841 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -914,8 +914,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) */ if (cpu_wait == r4k_wait_irqoff) { tcrestart = read_tc_c0_tcrestart(); - if (tcrestart >= (unsigned long)r4k_wait_irqoff - && tcrestart < (unsigned long)__pastwait) { + if (address_is_in_r4k_wait_irqoff(tcrestart)) { write_tc_c0_tcrestart(__pastwait); tcstatus &= ~TCSTATUS_IXMT; write_tc_c0_tcstatus(tcstatus); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index c6da4a905b98..e3be67012d78 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1542,7 +1542,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; extern char rollback_except_vec_vi; - char *vec_start = (cpu_wait == r4k_wait) ? + char *vec_start = using_rollback_handler() ? &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -1812,10 +1812,8 @@ void __init trap_init(void) extern char except_vec4; extern char except_vec3_r4000; unsigned long i; - int rollback; check_wait(); - rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1892,7 +1890,8 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, rollback ? rollback_handle_int : handle_int); + set_except_vector(0, using_rollback_handler() ? rollback_handle_int + : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); -- cgit From 087d990b371c59edbfc119600e2d2eda18366292 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 17:33:32 +0200 Subject: MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/idle.h | 3 ++- arch/mips/kernel/genex.S | 6 +++--- arch/mips/kernel/idle.c | 6 ++++++ 3 files changed, 11 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index be6f807c1e3f..d192158886b1 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -4,7 +4,8 @@ #include extern void (*cpu_wait)(void); -extern asmlinkage void r4k_wait(void); +extern void r4k_wait(void); +extern asmlinkage void __r4k_wait(void); extern void r4k_wait_irqoff(void); extern void __pastwait(void); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 9098829bfcb0..31fa856829cb 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -122,7 +122,7 @@ handle_vcei: __FINIT .align 5 /* 32 byte rollback region */ -LEAF(r4k_wait) +LEAF(__r4k_wait) .set push .set noreorder /* start of rollback region */ @@ -146,14 +146,14 @@ LEAF(r4k_wait) jr ra nop .set pop - END(r4k_wait) + END(__r4k_wait) .macro BUILD_ROLLBACK_PROLOGUE handler FEXPORT(rollback_\handler) .set push .set noat MFC0 k0, CP0_EPC - PTR_LA k1, r4k_wait + PTR_LA k1, __r4k_wait ori k0, 0x1f /* 32 byte rollback region */ xori k0, 0x1f bne k0, k1, 9f diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 985cc02786e3..3b09b888afa9 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -45,6 +45,12 @@ static void r39xx_wait(void) local_irq_enable(); } +void r4k_wait(void) +{ + local_irq_enable(); + __r4k_wait(); +} + /* * This variant is preferable as it allows testing need_resched and going to * sleep depending on the outcome atomically. Unfortunately the "It is -- cgit From 5f10428e4a6d99cc019270c51ad5a33fb38addeb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 16 May 2013 12:14:59 +0900 Subject: ARM: shmobile: marzen: Use error values in usb_power_* This patch updates the marzen board code as if USB PHY isn't enabled they phy will have a value set by ERR_PTR() rather than be NULL. Without this patch a NULL pointer dereference and kernel panic occurs on initialisation of USB on marzen. This resolves a regression introduced in 3.10-rc1 by b7fa5c2aec5be083eb2719b405089703608e9bc6 ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Tested-by: Nguyen Hong Ky Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 91052855cc12..b9594e911ce7 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); -- cgit From ba86e4dda700b3e696119c7f4fad945b90cf5c84 Mon Sep 17 00:00:00 2001 From: Sanjay Lal Date: Sat, 18 May 2013 06:54:23 -0700 Subject: KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API. Signed-off-by: Sanjay Lal Signed-off-by: Gleb Natapov --- arch/mips/include/asm/kvm.h | 55 ---------------------------------------- arch/mips/include/uapi/asm/kvm.h | 55 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 55 deletions(-) delete mode 100644 arch/mips/include/asm/kvm.h create mode 100644 arch/mips/include/uapi/asm/kvm.h (limited to 'arch') diff --git a/arch/mips/include/asm/kvm.h b/arch/mips/include/asm/kvm.h deleted file mode 100644 index 85789eacbf18..000000000000 --- a/arch/mips/include/asm/kvm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file "COPYING" in the main directory of this archive -* for more details. -* -* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. -* Authors: Sanjay Lal -*/ - -#ifndef __LINUX_KVM_MIPS_H -#define __LINUX_KVM_MIPS_H - -#include - -#define __KVM_MIPS - -#define N_MIPS_COPROC_REGS 32 -#define N_MIPS_COPROC_SEL 8 - -/* for KVM_GET_REGS and KVM_SET_REGS */ -struct kvm_regs { - __u32 gprs[32]; - __u32 hi; - __u32 lo; - __u32 pc; - - __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { -}; - -/* for KVM_GET_FPU and KVM_SET_FPU */ -struct kvm_fpu { -}; - -struct kvm_debug_exit_arch { -}; - -/* for KVM_SET_GUEST_DEBUG */ -struct kvm_guest_debug_arch { -}; - -struct kvm_mips_interrupt { - /* in */ - __u32 cpu; - __u32 irq; -}; - -/* definition of registers in kvm_run */ -struct kvm_sync_regs { -}; - -#endif /* __LINUX_KVM_MIPS_H */ diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h new file mode 100644 index 000000000000..85789eacbf18 --- /dev/null +++ b/arch/mips/include/uapi/asm/kvm.h @@ -0,0 +1,55 @@ +/* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +* +* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. +* Authors: Sanjay Lal +*/ + +#ifndef __LINUX_KVM_MIPS_H +#define __LINUX_KVM_MIPS_H + +#include + +#define __KVM_MIPS + +#define N_MIPS_COPROC_REGS 32 +#define N_MIPS_COPROC_SEL 8 + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { + __u32 gprs[32]; + __u32 hi; + __u32 lo; + __u32 pc; + + __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { +}; + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { +}; + +struct kvm_debug_exit_arch { +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +struct kvm_mips_interrupt { + /* in */ + __u32 cpu; + __u32 irq; +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +#endif /* __LINUX_KVM_MIPS_H */ -- cgit From 6d17c0d1e8a66f5508082cb0fecb8afb7e9a21e4 Mon Sep 17 00:00:00 2001 From: Sanjay Lal Date: Sat, 18 May 2013 06:54:24 -0700 Subject: KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock() - As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock(). Memory slots should be acccessed from a SRCU read section. - kvm_mips_map_page() now returns an error code to it's callers, instead of calling panic() if it cannot find a mapping for a particular gfn. Signed-off-by: Sanjay Lal Signed-off-by: Gleb Natapov --- arch/mips/kvm/kvm_tlb.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c index 89511a9258d3..87d845e9e5ab 100644 --- a/arch/mips/kvm/kvm_tlb.c +++ b/arch/mips/kvm/kvm_tlb.c @@ -17,6 +17,8 @@ #include #include #include +#include + #include #include @@ -169,21 +171,27 @@ void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu) } } -static void kvm_mips_map_page(struct kvm *kvm, gfn_t gfn) +static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn) { + int srcu_idx, err = 0; pfn_t pfn; if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE) - return; + return 0; + srcu_idx = srcu_read_lock(&kvm->srcu); pfn = kvm_mips_gfn_to_pfn(kvm, gfn); if (kvm_mips_is_error_pfn(pfn)) { - panic("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn); + kvm_err("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn); + err = -EFAULT; + goto out; } kvm->arch.guest_pmap[gfn] = pfn; - return; +out: + srcu_read_unlock(&kvm->srcu, srcu_idx); + return err; } /* Translate guest KSEG0 addresses to Host PA */ @@ -207,7 +215,10 @@ unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu, gva); return KVM_INVALID_PAGE; } - kvm_mips_map_page(vcpu->kvm, gfn); + + if (kvm_mips_map_page(vcpu->kvm, gfn) < 0) + return KVM_INVALID_ADDR; + return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset; } @@ -310,8 +321,11 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr, even = !(gfn & 0x1); vaddr = badvaddr & (PAGE_MASK << 1); - kvm_mips_map_page(vcpu->kvm, gfn); - kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1); + if (kvm_mips_map_page(vcpu->kvm, gfn) < 0) + return -1; + + if (kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1) < 0) + return -1; if (even) { pfn0 = kvm->arch.guest_pmap[gfn]; @@ -389,8 +403,11 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu, pfn0 = 0; pfn1 = 0; } else { - kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT); - kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT); + if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0) + return -1; + + if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0) + return -1; pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT]; pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT]; -- cgit From 22047b85170280b0ca59ce4befd0fa1f71a4ec16 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 22 May 2013 08:34:13 +0000 Subject: kprobes/mips: Fix to check double free of insn slot Fix to check double free of insn_slot at arch_remove_kprobe as other arches do. Signed-off-by: Masami Hiramatsu Cc: David Daney Cc: Maneesh Soni Cc: Victor Kamensky Cc: linux-mips@linux-mips.org Cc: Ingo Molnar Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: yrl.pp-manager.tt@hitachi.com Cc: systemtap@sourceware.org Patchwork: https://patchwork.linux-mips.org/patch/5293/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/kprobes.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c index 12bc4ebdf55b..1f8187ab0997 100644 --- a/arch/mips/kernel/kprobes.c +++ b/arch/mips/kernel/kprobes.c @@ -207,7 +207,10 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { - free_insn_slot(p->ainsn.insn, 0); + if (p->ainsn.insn) { + free_insn_slot(p->ainsn.insn, 0); + p->ainsn.insn = NULL; + } } static void save_previous_kprobe(struct kprobe_ctlblk *kcb) -- cgit From dec33abaafc89bcbd78f85fad0513170415a26d5 Mon Sep 17 00:00:00 2001 From: Aron Xu Date: Tue, 21 May 2013 13:37:06 +0000 Subject: MIPS: N64: Wire getdents64(2) As a relatively new ABI, N64 only had getdents syscall while other modern architectures have getdents64. This was noticed when Python 3.3 shifted to the latter one for aarch64. [ralf@linux-mips.org: The history of getdents64 is a little complicated. Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.] added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213, then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.] Signed-off-by: Aron Xu Acked-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5285/ Signed-off-by: Ralf Baechle --- arch/mips/include/uapi/asm/unistd.h | 5 +++-- arch/mips/kernel/scall64-64.S | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 16338b84fa79..1dee279f9665 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -694,16 +694,17 @@ #define __NR_process_vm_writev (__NR_Linux + 305) #define __NR_kcmp (__NR_Linux + 306) #define __NR_finit_module (__NR_Linux + 307) +#define __NR_getdents64 (__NR_Linux + 308) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 307 +#define __NR_Linux_syscalls 308 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 307 +#define __NR_64_Linux_syscalls 308 #if _MIPS_SIM == _MIPS_SIM_NABI32 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 36cfd4060e1f..97a5909a61cf 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -423,4 +423,5 @@ sys_call_table: PTR sys_process_vm_writev /* 5305 */ PTR sys_kcmp PTR sys_finit_module + PTR sys_getdents64 .size sys_call_table,.-sys_call_table -- cgit From 0c9b5a317b8ae7201fed07ec66d642b2ad7ea1b0 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 17 May 2013 23:45:18 +0800 Subject: avr32: fix building warnings caused by redefinitions of HZ As suggested by David Howells , use asm-generic/param.h and uapi/asm-generic/param.h for AVR32. It also fixes building warnings caused by redefinitions of HZ: In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4, from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition Signed-off-by: Jiang Liu Cc: Hans-Christian Egtvedt Cc: Haavard Skinnemoen Cc: linux-kernel@vger.kernel.org Signed-off-by: Hans-Christian Egtvedt --- arch/avr32/include/asm/Kbuild | 1 + arch/avr32/include/asm/param.h | 9 --------- arch/avr32/include/uapi/asm/Kbuild | 1 + arch/avr32/include/uapi/asm/param.h | 18 ------------------ 4 files changed, 2 insertions(+), 27 deletions(-) delete mode 100644 arch/avr32/include/asm/param.h delete mode 100644 arch/avr32/include/uapi/asm/param.h (limited to 'arch') diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild index 4dd4f78d3dcc..d22af851f3f6 100644 --- a/arch/avr32/include/asm/Kbuild +++ b/arch/avr32/include/asm/Kbuild @@ -2,3 +2,4 @@ generic-y += clkdev.h generic-y += exec.h generic-y += trace_clock.h +generic-y += param.h diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h deleted file mode 100644 index 009a167aea1f..000000000000 --- a/arch/avr32/include/asm/param.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_AVR32_PARAM_H -#define __ASM_AVR32_PARAM_H - -#include - -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __ASM_AVR32_PARAM_H */ diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild index df53e7a46774..3b85eaddf525 100644 --- a/arch/avr32/include/uapi/asm/Kbuild +++ b/arch/avr32/include/uapi/asm/Kbuild @@ -33,3 +33,4 @@ header-y += termbits.h header-y += termios.h header-y += types.h header-y += unistd.h +generic-y += param.h diff --git a/arch/avr32/include/uapi/asm/param.h b/arch/avr32/include/uapi/asm/param.h deleted file mode 100644 index d28aa5ee6d37..000000000000 --- a/arch/avr32/include/uapi/asm/param.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _UAPI__ASM_AVR32_PARAM_H -#define _UAPI__ASM_AVR32_PARAM_H - - -#ifndef HZ -# define HZ 100 -#endif - -/* TODO: Should be configurable */ -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -# define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 - -#endif /* _UAPI__ASM_AVR32_PARAM_H */ -- cgit From 934fc24df10abfd5aff533d0d044a17669d77d79 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 15 May 2013 10:46:30 +0100 Subject: ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling Make the SHA1 asm code ABI conformant by making sure all stack accesses occur above the stack pointer. Origin: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=1a9d60d2 Signed-off-by: Ard Biesheuvel Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/crypto/sha1-armv4-large.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac9..99207c45ec10 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] -- cgit From 4ca46c5e1f38e32c90247686e9e17dae213ecbdb Mon Sep 17 00:00:00 2001 From: Steven Capper Date: Thu, 16 May 2013 17:16:11 +0100 Subject: ARM: 7727/1: remove the .vm_mm value from gate_vma If one reads /proc/$PID/smaps, the mmap_sem belonging to the address space of the task being examined is locked for reading. All the pages of the vmas belonging to the task's address space are then walked with this lock held. If a gate_vma is present in the architecture, it too is examined by the fs/proc/task_mmu.c code. As gate_vma doesn't belong to the address space of the task though, its pages are not walked. A recent cleanup (commit f6604efe) of the gate_vma initialisation code set the vm_mm value to &init_mm. Unfortunately a non-NULL vm_mm value in the gate_vma will cause the task_mmu code to attempt to walk the pages of the gate_vma (with no mmap-sem lock held). If one enables Transparent Huge Page support and vm debugging, this will then cause OOPses as pmd_trans_huge_lock is called without mmap_sem being locked. This patch removes the .vm_mm value from gate_vma, restoring the original behaviour of the task_mmu code. Signed-off-by: Steve Capper Signed-off-by: Russell King --- arch/arm/kernel/process.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f21970316836..282de4826abb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) -- cgit From f27d6e172367a424ecf9d373062a820338671277 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 May 2013 19:38:51 +0100 Subject: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported Commit d3f79584a8b5 ("ARM: cleanup undefined instruction entry code") improved the register scheduling when handling undefined instructions. A side effect of this is that r5 is now used as a temporary, whilst the VFP probing code relies on r5 containing a non-zero value when VFP is not supported. This patch fixes the VFP detection code so that we don't rely on the contents of r5. Without this patch, Linux dies loudly on CPUs without VFP support. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a62bbf..46e17492fd1f 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) -- cgit From f538881cc672c1b049aa0a34a792d0953fcecba5 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 16 May 2013 12:19:29 +0530 Subject: ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach() Flush and INVALIDATE the dcache page. This helper is only used for writeback of CODE pages to memory. So there's no value in keeping the dcache lines around. Infact it is risky as a writeback on natural eviction under pressure can cause un-needed writeback with weird issues on aliasing dcache configurations. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache_arc700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 2f12bca8aef3..d4b7bb616840 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -610,7 +610,7 @@ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) local_irq_save(flags); __ic_line_inv_vaddr(paddr, vaddr, len); - __dc_line_op(paddr, vaddr, len, OP_FLUSH); + __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); local_irq_restore(flags); } -- cgit From a950549c675f2c8c504469dec7d780da8a6433dc Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 21 May 2013 15:25:11 +0530 Subject: ARC: copy_(to|from)_user() to honor usermode-access permissions This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by: Anton Kolesov Cc: # 3.9 Signed-off-by: Vineet Gupta --- arch/arc/include/asm/pgtable.h | 26 +++++++++++++++----------- arch/arc/include/asm/tlb.h | 2 +- arch/arc/mm/tlbex.S | 6 +++--- 3 files changed, 19 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 1cc4720faccb..95b1522212a7 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -57,9 +57,9 @@ #define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */ #define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<5) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */ @@ -72,9 +72,9 @@ /* PD1 */ #define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<3) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */ @@ -93,7 +93,8 @@ #endif /* Kernel allowed all permissions for all pages */ -#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) +#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \ + _PAGE_GLOBAL | _PAGE_PRESENT) #ifdef CONFIG_ARC_CACHE_PAGES #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE @@ -106,7 +107,11 @@ * -by default cached, unless config otherwise * -present in memory */ -#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) +#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE) + +#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ) +#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE) +#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE) /* Set of bits not changed in pte_modify */ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) @@ -125,11 +130,10 @@ * kernel vaddr space - visible in all addr spaces, but kernel mode only * Thus Global, all-kernel-access, no-user-access, cached */ -#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL) +#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) /* ioremap */ -#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \ - _PAGE_GLOBAL) +#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS) /************************************************************************** * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 85b6df839bd7..cb0c708ca665 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -16,7 +16,7 @@ /* Masks for actual TLB "PD"s */ #define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) #define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \ - _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ + _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \ _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) #ifndef __ASSEMBLY__ diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 9df765dc7c3a..3357d26ffe54 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI ;---------------------------------------------------------------- ; VERIFY_PTE: Check if PTE permissions approp for executing code cmp_s r2, VMALLOC_START - mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE) + mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE) mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE) and r3, r0, r2 ; Mask out NON Flag bits from PTE @@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD mov_s r2, 0 lr r3, [ecr] btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access - or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access - or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE ; Above laddering takes care of XCHG access ; which is both Read and Write -- cgit From 3e87974dec5ec25a8a4852d9292db6be659164e6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 May 2013 18:38:10 +0530 Subject: ARC: Brown paper bag bug in macro for checking cache color The VM_EXEC check in update_mmu_cache() was getting optimized away because of a stupid error in definition of macro addr_not_cache_congruent() The intention was to have the equivalent of following: if (a || (1 ? b : 0)) but we ended up with following: if (a || 1 ? b : 0) And because precedence of '||' is more that that of '?', gcc was optimizing away evaluation of Nasty Repercussions: 1. For non-aliasing configs it would mean some extraneous dcache flushes for non-code pages if U/K mappings were not congruent. 2. For aliasing config, some needed dcache flush for code pages might be missed if U/K mappings were congruent. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cacheflush.h | 4 +++- arch/arc/mm/tlb.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 9f841af41092..7d819749478c 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -99,8 +99,10 @@ static inline int cache_is_vipt_aliasing(void) * checks if two addresses (after page aligning) index into same cache set */ #define addr_not_cache_congruent(addr1, addr2) \ +({ \ cache_is_vipt_aliasing() ? \ - (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \ +}) #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 066145b5f348..fe1c5a073afe 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -444,7 +444,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, * so userspace sees the right data. * (Avoids the flush for Non-exec + congruent mapping case) */ - if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) { + if ((vma->vm_flags & VM_EXEC) || + addr_not_cache_congruent(paddr, vaddr)) { struct page *page = pfn_to_page(pte_pfn(*ptep)); int dirty = test_and_clear_bit(PG_arch_1, &page->flags); -- cgit From 006dfb3c9c44192f06093d65b3a876fa5ad1319a Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 19 May 2013 14:06:44 +0530 Subject: ARC: Use enough bits for determining page's cache color The current code uses 2 bits for determining page's dcache color, thus sorting pages into 4 bins, whereas the aliasing dcache really has 2 bins (8k page, 64k dcache - 4 way-set-assoc). This can cause extraneous flushes - e.g. color 0 and 2. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cacheflush.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 7d819749478c..ef62682e8d95 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -93,7 +93,7 @@ static inline int cache_is_vipt_aliasing(void) #endif } -#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3) +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1) /* * checks if two addresses (after page aligning) index into same cache set -- cgit From 8fc1f5d7eff9a4ed0cdb7215e7ca4b82b931d6d7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:23:22 +0000 Subject: powerpc: Fix TLB cleanup at boot on POWER8 The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cpu_setup_power.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S index a283b6442b26..18b5b9cf8e37 100644 --- a/arch/powerpc/kernel/cpu_setup_power.S +++ b/arch/powerpc/kernel/cpu_setup_power.S @@ -135,8 +135,12 @@ __init_HFSCR: blr __init_TLB: - /* Clear the TLB */ - li r6,128 + /* + * Clear the TLB using the "IS 3" form of tlbiel instruction + * (invalidate by congruence class). P7 has 128 CCs, P8 has 512 + * so we just always do 512 + */ + li r6,512 mtctr r6 li r7,0xc00 /* IS field = 0b11 */ ptesync -- cgit From bee7dd9c5fd5ab944e2e0ef3b92905fcbc993768 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:24:39 +0000 Subject: powerpc/pci: Fix bogus message at boot about empty memory resources The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 6053f037ef0a..e9acf50dd5b2 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1520,9 +1520,10 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose, for (i = 0; i < 3; ++i) { res = &hose->mem_resources[i]; if (!res->flags) { - printk(KERN_ERR "PCI: Memory resource 0 not set for " - "host bridge %s (domain %d)\n", - hose->dn->full_name, hose->global_number); + if (i == 0) + printk(KERN_ERR "PCI: Memory resource 0 not set for " + "host bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); continue; } offset = hose->mem_offset[i]; -- cgit From 605e44d6e6f9b0c9ca8842dc0eb3ad032a463bdb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 20 May 2013 17:25:15 +0000 Subject: powerpc/powernv: Fix condition for when to invalidate the TCE cache We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 163bd7422f1c..098d3573315c 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -367,7 +367,7 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) while (npages--) *(tcep++) = 0; - if (tbl->it_type & TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1); } -- cgit From 59affcd3e460b97492bc1aa2b843bafe7c54f596 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 May 2013 16:31:12 +0000 Subject: powerpc: Context switch more PMU related SPRs In commit 9353374 "Context switch the new EBB SPRs" we added support for context switching some new EBB SPRs. However despite four of us signing off on that patch we missed some. To be fair these are not actually new SPRs, but they are now potentially user accessible so need to be context switched. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 6 ++++++ arch/powerpc/kernel/asm-offsets.c | 6 ++++++ arch/powerpc/kernel/entry_64.S | 28 ++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index d7e67ca8b4a6..594db6bc093c 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -284,6 +284,12 @@ struct thread_struct { unsigned long ebbrr; unsigned long ebbhr; unsigned long bescr; + unsigned long siar; + unsigned long sdar; + unsigned long sier; + unsigned long mmcr0; + unsigned long mmcr2; + unsigned long mmcra; #endif }; diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b51a97cfedf8..6f16ffafa6f0 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -127,6 +127,12 @@ int main(void) DEFINE(THREAD_BESCR, offsetof(struct thread_struct, bescr)); DEFINE(THREAD_EBBHR, offsetof(struct thread_struct, ebbhr)); DEFINE(THREAD_EBBRR, offsetof(struct thread_struct, ebbrr)); + DEFINE(THREAD_SIAR, offsetof(struct thread_struct, siar)); + DEFINE(THREAD_SDAR, offsetof(struct thread_struct, sdar)); + DEFINE(THREAD_SIER, offsetof(struct thread_struct, sier)); + DEFINE(THREAD_MMCR0, offsetof(struct thread_struct, mmcr0)); + DEFINE(THREAD_MMCR2, offsetof(struct thread_struct, mmcr2)); + DEFINE(THREAD_MMCRA, offsetof(struct thread_struct, mmcra)); #endif #ifdef CONFIG_PPC_TRANSACTIONAL_MEM DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch)); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 51cfb8fc301f..0e9095e47b5b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -465,6 +465,20 @@ BEGIN_FTR_SECTION std r0, THREAD_EBBHR(r3) mfspr r0, SPRN_EBBRR std r0, THREAD_EBBRR(r3) + + /* PMU registers made user read/(write) by EBB */ + mfspr r0, SPRN_SIAR + std r0, THREAD_SIAR(r3) + mfspr r0, SPRN_SDAR + std r0, THREAD_SDAR(r3) + mfspr r0, SPRN_SIER + std r0, THREAD_SIER(r3) + mfspr r0, SPRN_MMCR0 + std r0, THREAD_MMCR0(r3) + mfspr r0, SPRN_MMCR2 + std r0, THREAD_MMCR2(r3) + mfspr r0, SPRN_MMCRA + std r0, THREAD_MMCRA(r3) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif @@ -560,6 +574,20 @@ BEGIN_FTR_SECTION ld r0, THREAD_EBBRR(r4) mtspr SPRN_EBBRR, r0 + /* PMU registers made user read/(write) by EBB */ + ld r0, THREAD_SIAR(r4) + mtspr SPRN_SIAR, r0 + ld r0, THREAD_SDAR(r4) + mtspr SPRN_SDAR, r0 + ld r0, THREAD_SIER(r4) + mtspr SPRN_SIER, r0 + ld r0, THREAD_MMCR0(r4) + mtspr SPRN_MMCR0, r0 + ld r0, THREAD_MMCR2(r4) + mtspr SPRN_MMCR2, r0 + ld r0, THREAD_MMCRA(r4) + mtspr SPRN_MMCRA, r0 + ld r0,THREAD_TAR(r4) mtspr SPRN_TAR,r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) -- cgit From b72c1f651491e4cd33ddec79c504a49071a512f0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 May 2013 22:58:21 +0000 Subject: powerpc: Make radeon 32-bit MSI quirk work on powernv This moves the quirk itself to pci_64.c as to get built on all ppc64 platforms (the only ones with a pci_dn), factors the two implementations of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit MSIs on IODA based powernv platforms. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci-bridge.h | 2 ++ arch/powerpc/kernel/pci_64.c | 10 +++++++++ arch/powerpc/kernel/pci_dn.c | 8 +++++++ arch/powerpc/platforms/powernv/pci-ioda.c | 27 ++++++++++-------------- arch/powerpc/platforms/powernv/pci.c | 4 ++++ arch/powerpc/platforms/pseries/msi.c | 35 +++---------------------------- 6 files changed, 38 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 8b11b5bd9938..2c1d8cb9b265 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -174,6 +174,8 @@ struct pci_dn { /* Get the pointer to a device_node's pci_dn */ #define PCI_DN(dn) ((struct pci_dn *) (dn)->data) +extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev); + extern void * update_dn_pci_info(struct device_node *dn, void *data); static inline int pci_device_from_OF_node(struct device_node *np, diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 873050d26840..2e8629654ca8 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -266,3 +266,13 @@ int pcibus_to_node(struct pci_bus *bus) } EXPORT_SYMBOL(pcibus_to_node); #endif + +static void quirk_radeon_32bit_msi(struct pci_dev *dev) +{ + struct pci_dn *pdn = pci_get_pdn(dev); + + if (pdn) + pdn->force_32bit_msi = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi); diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index e7af165f8b9d..df038442548a 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -32,6 +32,14 @@ #include #include +struct pci_dn *pci_get_pdn(struct pci_dev *pdev) +{ + struct device_node *dn = pci_device_to_OF_node(pdev); + if (!dn) + return NULL; + return PCI_DN(dn); +} + /* * Traverse_func that inits the PCI fields of the device node. * NOTE: this *must* be done before read/write config to the device. diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 3937aaae5bc4..9c9d15e4cdf2 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -68,16 +68,6 @@ define_pe_printk_level(pe_err, KERN_ERR); define_pe_printk_level(pe_warn, KERN_WARNING); define_pe_printk_level(pe_info, KERN_INFO); -static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev) -{ - struct device_node *np; - - np = pci_device_to_OF_node(dev); - if (!np) - return NULL; - return PCI_DN(np); -} - static int pnv_ioda_alloc_pe(struct pnv_phb *phb) { unsigned long pe; @@ -110,7 +100,7 @@ static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); if (!pdn) return NULL; @@ -173,7 +163,7 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) /* Add to all parents PELT-V */ while (parent) { - struct pci_dn *pdn = pnv_ioda_get_pdn(parent); + struct pci_dn *pdn = pci_get_pdn(parent); if (pdn && pdn->pe_number != IODA_INVALID_PE) { rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, pe->pe_number, OPAL_ADD_PE_TO_DOMAIN); @@ -252,7 +242,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); struct pnv_ioda_pe *pe; int pe_num; @@ -323,7 +313,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - struct pci_dn *pdn = pnv_ioda_get_pdn(dev); + struct pci_dn *pdn = pci_get_pdn(dev); if (pdn == NULL) { pr_warn("%s: No device node associated with device !\n", @@ -436,7 +426,7 @@ static void pnv_pci_ioda_setup_PEs(void) static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev) { - struct pci_dn *pdn = pnv_ioda_get_pdn(pdev); + struct pci_dn *pdn = pci_get_pdn(pdev); struct pnv_ioda_pe *pe; /* @@ -768,6 +758,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, unsigned int is_64, struct msi_msg *msg) { struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); + struct pci_dn *pdn = pci_get_pdn(dev); struct irq_data *idata; struct irq_chip *ichip; unsigned int xive_num = hwirq - phb->msi_base; @@ -783,6 +774,10 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, if (pe->mve_number < 0) return -ENXIO; + /* Force 32-bit MSI on some broken devices */ + if (pdn && pdn->force_32bit_msi) + is_64 = 0; + /* Assign XIVE to PE */ rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); if (rc) { @@ -1035,7 +1030,7 @@ static int pnv_pci_enable_device_hook(struct pci_dev *dev) if (!phb->initialized) return 0; - pdn = pnv_ioda_get_pdn(dev); + pdn = pci_get_pdn(dev); if (!pdn || pdn->pe_number == IODA_INVALID_PE) return -EINVAL; diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 098d3573315c..277343cc6a3d 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -47,6 +47,10 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) { struct pci_controller *hose = pci_bus_to_host(pdev->bus); struct pnv_phb *phb = hose->private_data; + struct pci_dn *pdn = pci_get_pdn(pdev); + + if (pdn && pdn->force_32bit_msi && !phb->msi32_support) + return -ENODEV; return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV; } diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 420524e6f8c9..d34f4ffdb796 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -26,26 +26,6 @@ static int query_token, change_token; #define RTAS_CHANGE_MSIX_FN 4 #define RTAS_CHANGE_32MSI_FN 5 -static struct pci_dn *get_pdn(struct pci_dev *pdev) -{ - struct device_node *dn; - struct pci_dn *pdn; - - dn = pci_device_to_OF_node(pdev); - if (!dn) { - dev_dbg(&pdev->dev, "rtas_msi: No OF device node\n"); - return NULL; - } - - pdn = PCI_DN(dn); - if (!pdn) { - dev_dbg(&pdev->dev, "rtas_msi: No PCI DN\n"); - return NULL; - } - - return pdn; -} - /* RTAS Helpers */ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) @@ -91,7 +71,7 @@ static void rtas_disable_msi(struct pci_dev *pdev) { struct pci_dn *pdn; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return; @@ -152,7 +132,7 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) struct pci_dn *pdn; const u32 *req_msi; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return -ENODEV; @@ -402,7 +382,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) struct msi_msg msg; int nvec = nvec_in; - pdn = get_pdn(pdev); + pdn = pci_get_pdn(pdev); if (!pdn) return -ENODEV; @@ -518,12 +498,3 @@ static int rtas_msi_init(void) } arch_initcall(rtas_msi_init); -static void quirk_radeon(struct pci_dev *dev) -{ - struct pci_dn *pdn = get_pdn(dev); - - if (pdn) - pdn->force_32bit_msi = 1; -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon); -- cgit From 83920c498ebb51cbd62f26f72e87c04a2a46dec9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 May 2013 23:00:22 +0000 Subject: powerpc/powernv: Build a zImage.epapr The zImage.epapr wrapper allows to use zImages when booting via a flat device-tree which can be used on powernv. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig index d3e840d643af..c24684c818ab 100644 --- a/arch/powerpc/platforms/powernv/Kconfig +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -6,6 +6,7 @@ config PPC_POWERNV select PPC_ICP_NATIVE select PPC_P7_NAP select PPC_PCI_CHOICE if EMBEDDED + select EPAPR_BOOT default y config POWERNV_MSI -- cgit From f1dd153121dcb872ae6cba8d52bec97519eb7d97 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 22 May 2013 11:07:46 +0000 Subject: powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support Recent commit e61133dda480062d221f09e4fc18f66763f8ecd0 added support for a new firmware feature to force an adapter to use 32 bit MSIs. However, this firmware is not available for all systems. The hack below allows devices needing 32 bit MSIs to work on these systems as well. It is careful to only enable this on Gen2 slots, which should limit this to configurations where this hack is needed and tested to work. [Small change to factor out the hack into a separate function -- BenH] Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/msi.c | 40 +++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index d34f4ffdb796..6d2f0abce6fa 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -374,6 +374,23 @@ static int check_msix_entries(struct pci_dev *pdev) return 0; } +static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev) +{ + u32 addr_hi, addr_lo; + + /* + * We should only get in here for IODA1 configs. This is based on the + * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS + * support, and we are in a PCIe Gen2 slot. + */ + dev_info(&pdev->dev, + "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n"); + pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi); + addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4); + pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo); + pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0); +} + static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) { struct pci_dn *pdn; @@ -381,6 +398,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) struct msi_desc *entry; struct msi_msg msg; int nvec = nvec_in; + int use_32bit_msi_hack = 0; pdn = pci_get_pdn(pdev); if (!pdn) @@ -408,15 +426,31 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type) */ again: if (type == PCI_CAP_ID_MSI) { - if (pdn->force_32bit_msi) + if (pdn->force_32bit_msi) { rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec); - else + if (rc < 0) { + /* + * We only want to run the 32 bit MSI hack below if + * the max bus speed is Gen2 speed + */ + if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) + return rc; + + use_32bit_msi_hack = 1; + } + } else + rc = -1; + + if (rc < 0) rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); - if (rc < 0 && !pdn->force_32bit_msi) { + if (rc < 0) { pr_debug("rtas_msi: trying the old firmware call.\n"); rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); } + + if (use_32bit_msi_hack && rc > 0) + rtas_hack_32bit_msi_gen2(pdev); } else rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); -- cgit From 029efddab6967f755c21f47b0bc456f1a546805f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 24 May 2013 00:59:16 +0200 Subject: ARM: at91: at91sam9n12: move external irq declatation to DT Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12.dtsi | 1 + arch/arm/mach-at91/at91sam9n12.c | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6dfbcb1..8d25f889928e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -57,6 +57,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f51..c7d670d11802 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END -- cgit From f6d35d67d0a5c159f767a20f4fcc1d295a7314b1 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 23 May 2013 18:01:21 +0200 Subject: ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition The PA24 pin is wrongly assigned to peripheral B. In the current config there is 2 ETX3 pins (PA11 and PA24) and no ETXER pin (PA22). Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ --- arch/arm/boot/dts/at91sam9260.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac234..84c4bef2d726 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -264,7 +264,7 @@ atmel,pins = <0 10 0x2 0x0 /* PA10 periph B */ 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ + 0 22 0x2 0x0 /* PA22 periph B */ 0 25 0x2 0x0 /* PA25 periph B */ 0 26 0x2 0x0 /* PA26 periph B */ 0 27 0x2 0x0 /* PA27 periph B */ -- cgit From 144ea15e4fefbee14a7dcb05c7cd0822fda3ebf6 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 23 May 2013 10:18:48 +0000 Subject: ARM: at91/sama5: fix incorrect PMC pcr div definition Signed-off-by: Josh Wu Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/at91_pmc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4e..2bd7f51b0b82 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif -- cgit From 949451b9b19da5e998778eb78929aafc73b5c227 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:42:39 +0000 Subject: parisc: add rp5470 entry to machine database Signed-off-by: Helge Deller --- arch/parisc/kernel/hardware.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index f7752f6af29e..9e2d2e408529 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -222,6 +222,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, + {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"}, {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, -- cgit From d845b5fb36edbd16563bde49ae1217b3f5132eec Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:51:41 +0000 Subject: parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S additionally clean up some whitespaces & tabs. Signed-off-by: Helge Deller --- arch/parisc/kernel/pacache.S | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 5e1de6072be5..36d7f402e48e 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -605,14 +605,14 @@ ENTRY(copy_user_page_asm) convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ convert_phys_for_tlb_insert20 %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depdi 1, 41,1, %r29 /* Form aliased virtual address 'from' */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ extrw,u %r23, 24,25, %r23 /* convert phys addr to tlb insert format */ depw %r24, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depwi 1, 9,1, %r29 /* Form aliased virtual address 'from' */ #endif @@ -762,7 +762,7 @@ ENTRY(clear_user_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -846,7 +846,7 @@ ENTRY(flush_dcache_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -918,11 +918,11 @@ ENTRY(flush_icache_page_asm) #endif convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ -- cgit From d0c3be806a3fe7f4abdb0f7e7287addb55e73f35 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 18 May 2013 19:35:44 +0000 Subject: parisc: show number of FPE and unaligned access handler calls in /proc/interrupts Show number of floating point assistant and unaligned access fixup handler in /proc/interrupts file. Signed-off-by: Helge Deller --- arch/parisc/include/asm/hardirq.h | 2 ++ arch/parisc/kernel/irq.c | 8 ++++++++ arch/parisc/kernel/traps.c | 1 + arch/parisc/kernel/unaligned.c | 3 +++ 4 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index c19f7138ba48..4c6dd8da1e5d 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -28,6 +28,8 @@ typedef struct { unsigned int irq_resched_count; unsigned int irq_call_count; #endif + unsigned int irq_unaligned_count; + unsigned int irq_fpassist_count; unsigned int irq_tlb_count; } ____cacheline_aligned irq_cpustat_t; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 55237a70e197..9c2d953f3de5 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -188,6 +188,14 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); seq_puts(p, " Function call interrupts\n"); #endif + seq_printf(p, "%*s: ", prec, "UAH"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_unaligned_count); + seq_puts(p, " Unaligned access handler traps\n"); + seq_printf(p, "%*s: ", prec, "FPA"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_fpassist_count); + seq_puts(p, " Floating point assist traps\n"); seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index fe41a98043bb..04e47c6a4562 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -646,6 +646,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) case 14: /* Assist Exception Trap, i.e. floating point exception. */ die_if_kernel("Floating point exception", regs, 0); /* quiet */ + __inc_irq_stat(irq_fpassist_count); handle_fpe(regs); return; diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 234e3682cf09..d7c0acb35ec2 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -27,6 +27,7 @@ #include #include #include +#include /* #define DEBUG_UNALIGNED 1 */ @@ -454,6 +455,8 @@ void handle_unaligned(struct pt_regs *regs) struct siginfo si; register int flop=0; /* true if this is a flop */ + __inc_irq_stat(irq_unaligned_count); + /* log a message with pacing */ if (user_mode(regs)) { if (current->thread.flags & PARISC_UAC_SIGBUS) { -- cgit From b63a2bbc0b9b106a93e11952ab057e2408f2eb02 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Mon, 20 May 2013 16:42:53 +0000 Subject: parisc: make interrupt and interruption stack allocation reentrant The get_stack_use_cr30 and get_stack_use_r30 macros allocate a stack frame for external interrupts and interruptions requiring a stack frame. They are currently not reentrant in that they save register context before the stack is set or adjusted. I have observed a number of system crashes where there was clear evidence of stack corruption during interrupt processing, and as a result register corruption. Some interruptions can still occur during interruption processing, however external interrupts are disabled and data TLB misses don't occur for absolute accesses. So, it's not entirely clear what triggers this issue. Also, if an interruption occurs when Q=0, it is generally not possible to recover as the shadowed registers are not copied. The attached patch reworks the get_stack_use_cr30 and get_stack_use_r30 macros to allocate stack before doing register saves. The new code is a couple of instructions shorter than the old implementation. Thus, it's an improvement even if it doesn't fully resolve the stack corruption issue. Based on limited testing, it improves SMP system stability. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/include/asm/assembly.h | 1 - arch/parisc/kernel/entry.S | 19 ++++++++++--------- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index 89fb40005e3f..0da848232344 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -438,7 +438,6 @@ SAVE_SP (%sr4, PT_SR4 (\regs)) SAVE_SP (%sr5, PT_SR5 (\regs)) SAVE_SP (%sr6, PT_SR6 (\regs)) - SAVE_SP (%sr7, PT_SR7 (\regs)) SAVE_CR (%cr17, PT_IASQ0(\regs)) mtctl %r0, %cr17 diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ae27cb6ce19a..e8f07dd28401 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -65,15 +65,11 @@ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + mtsp %r0, %sr6 tovirt_r1 %r29 load32 KERNEL_PSW, %r1 rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ - mtsp %r0, %sr6 - mtsp %r0, %sr7 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ mtctl %r1, %ipsw @@ -119,17 +115,20 @@ /* we save the registers in the task struct */ + copy %r30, %r17 mfctl %cr30, %r1 + ldo THREAD_SZ_ALGN(%r1), %r30 + mtsp %r0,%sr7 + mtsp %r16,%sr3 tophys %r1,%r9 LDREG TI_TASK(%r9), %r1 /* thread_info -> task_struct */ tophys %r1,%r9 ldo TASK_REGS(%r9),%r9 - STREG %r30, PT_GR30(%r9) + STREG %r17,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 - mfctl %cr30, %r1 - ldo THREAD_SZ_ALGN(%r1), %r30 .endm .macro get_stack_use_r30 @@ -137,10 +136,12 @@ /* we put a struct pt_regs on the stack and save the registers there */ tophys %r30,%r9 - STREG %r30,PT_GR30(%r9) + copy %r30,%r1 ldo PT_SZ_ALGN(%r30),%r30 + STREG %r1,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 .endm -- cgit From d96b51ec14650b490ab98e738bcc02309396e5bc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 24 May 2013 21:27:35 +0000 Subject: parisc: fix irq stack on UP and SMP The logic to detect if the irq stack was already in use with raw_spin_trylock() is wrong, because it will generate a "trylock failure on UP" error message with CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y. arch_spin_trylock() can't be used either since in the CONFIG_SMP=n case no atomic protection is given and we are reentrant here. A mutex didn't worked either and brings more overhead by turning off interrupts. So, let's use the fastest path for parisc which is the ldcw instruction. Counting how often the irq stack was used is pretty useless, so just drop this piece of code. Signed-off-by: Helge Deller --- arch/parisc/include/asm/hardirq.h | 5 ----- arch/parisc/include/asm/processor.h | 21 ------------------- arch/parisc/kernel/irq.c | 41 +++++++++++++++++++++++-------------- 3 files changed, 26 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 4c6dd8da1e5d..241c34518465 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -17,13 +17,8 @@ typedef struct { unsigned int __softirq_pending; -#ifdef CONFIG_DEBUG_STACKOVERFLOW unsigned int kernel_stack_usage; -#ifdef CONFIG_IRQSTACKS unsigned int irq_stack_usage; - unsigned int irq_stack_counter; -#endif -#endif #ifdef CONFIG_SMP unsigned int irq_resched_count; unsigned int irq_call_count; diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index cfbc43929cf6..cc2290a3cace 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -17,7 +17,6 @@ #include #include #include - #endif /* __ASSEMBLY__ */ /* @@ -58,26 +57,6 @@ #ifndef __ASSEMBLY__ -/* - * IRQ STACK - used for irq handler - */ -#ifdef __KERNEL__ - -#include - -#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ - -union irq_stack_union { - unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; - raw_spinlock_t lock; -}; - -DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); - -void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); - -#endif /* __KERNEL__ */ - /* * Data detected about CPUs at boot time which is the same for all CPU's. * HP boxes are SMP - ie identical processors. diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 9c2d953f3de5..2e6443b1e922 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -27,11 +27,11 @@ #include #include #include -#include #include #include #include +#include #undef PARISC_IRQ_CR16_COUNTS @@ -172,10 +172,6 @@ int arch_show_interrupts(struct seq_file *p, int prec) for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage); seq_puts(p, " Interrupt stack usage\n"); - seq_printf(p, "%*s: ", prec, "ISC"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter); - seq_puts(p, " Interrupt stack usage counter\n"); # endif #endif #ifdef CONFIG_SMP @@ -384,6 +380,24 @@ static inline int eirr_to_irq(unsigned long eirr) return (BITS_PER_LONG - bit) + TIMER_IRQ; } +#ifdef CONFIG_IRQSTACKS +/* + * IRQ STACK - used for irq handler + */ +#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ + +union irq_stack_union { + unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; + volatile unsigned int slock[4]; + volatile unsigned int lock[1]; +}; + +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { + .slock = { 1,1,1,1 }, + }; +#endif + + int sysctl_panic_on_stackoverflow = 1; static inline void stack_overflow_check(struct pt_regs *regs) @@ -450,27 +464,26 @@ panic_check: } #ifdef CONFIG_IRQSTACKS -DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { - .lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock) - }; +/* in entry.S: */ +void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); static void execute_on_irq_stack(void *func, unsigned long param1) { union irq_stack_union *union_ptr; unsigned long irq_stack; - raw_spinlock_t *irq_stack_in_use; + volatile unsigned int *irq_stack_in_use; union_ptr = &per_cpu(irq_stack_union, smp_processor_id()); irq_stack = (unsigned long) &union_ptr->stack; - irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock), + irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.slock), 64); /* align for stack frame usage */ /* We may be called recursive. If we are already using the irq stack, * just continue to use it. Use spinlocks to serialize * the irq stack usage. */ - irq_stack_in_use = &union_ptr->lock; - if (!raw_spin_trylock(irq_stack_in_use)) { + irq_stack_in_use = (volatile unsigned int *)__ldcw_align(union_ptr); + if (!__ldcw(irq_stack_in_use)) { void (*direct_call)(unsigned long p1) = func; /* We are using the IRQ stack already. @@ -482,10 +495,8 @@ static void execute_on_irq_stack(void *func, unsigned long param1) /* This is where we switch to the IRQ stack. */ call_on_stack(param1, func, irq_stack); - __inc_irq_stat(irq_stack_counter); - /* free up irq stack usage. */ - do_raw_spin_unlock(irq_stack_in_use); + *irq_stack_in_use = 1; } asmlinkage void do_softirq(void) -- cgit From 7bb66f6e6eecdd8e10ed3a63bd28c1e9105adc79 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 25 May 2013 14:04:25 +0530 Subject: ARC: lazy dcache flush broke gdb in non-aliasing configs gdbserver inserting a breakpoint ends up calling copy_user_page() for a code page. The generic version of which (non-aliasing config) didn't set the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for corresponding dynamic loader code page - causing garbade to be executed. So now aliasing versions of copy_user_highpage()/clear_page() are made default. There is no significant overhead since all of special alias handling code is compiled out for non-aliasing build Signed-off-by: Vineet Gupta --- arch/arc/include/asm/page.h | 9 --------- arch/arc/mm/cache_arc700.c | 21 +++++++++++---------- 2 files changed, 11 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 374a35514116..ab84bf131fe1 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -19,13 +19,6 @@ #define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) #define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING - -#define clear_user_page(addr, vaddr, pg) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom) - -#else /* VIPT aliasing dcache */ - struct vm_area_struct; struct page; @@ -35,8 +28,6 @@ void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma); void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); -#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ - #undef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index d4b7bb616840..aedce1905441 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -676,6 +676,17 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, flush_cache_all(); } +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_page(page_address(page), u_vaddr); + __flush_dcache_page(page_address(page), page_address(page)); + +} + +#endif + void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma) { @@ -725,16 +736,6 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) set_bit(PG_arch_1, &page->flags); } -void flush_anon_page(struct vm_area_struct *vma, struct page *page, - unsigned long u_vaddr) -{ - /* TBD: do we really need to clear the kernel mapping */ - __flush_dcache_page(page_address(page), u_vaddr); - __flush_dcache_page(page_address(page), page_address(page)); - -} - -#endif /********************************************************************** * Explicit Cache flush request from user space via syscall -- cgit From 6b3f7b5c2221c7a4fe715ea4fd479b6d07bbcbb5 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 25 May 2013 12:54:08 -0400 Subject: score: remove redundant kcore_list entries kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across the tree. Noticed while grepping the tree for some other kcore stuff. (score looks pretty unmaintained to me.) Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/score/mm/init.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index d8f988a37d16..0940682ab38b 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -41,8 +41,6 @@ unsigned long empty_zero_page; EXPORT_SYMBOL_GPL(empty_zero_page); -static struct kcore_list kcore_mem, kcore_vmalloc; - static void setup_zero_page(void) { struct page *page; -- cgit From dde1b65110353517816bcbc58539463396202244 Mon Sep 17 00:00:00 2001 From: Steve Capper Date: Fri, 17 May 2013 12:32:55 +0100 Subject: ARM: mm: correct pte_same behaviour for LPAE. For 3 levels of paging the PTE_EXT_NG bit will be set for user address ptes that are written to a page table but not for ptes created with mk_pte. This can cause some comparison tests made by pte_same to fail spuriously and lead to other problems. To correct this behaviour, we mask off PTE_EXT_NG for any pte that is present before running the comparison. Signed-off-by: Steve Capper Reviewed-by: Will Deacon --- arch/arm/include/asm/pgtable-3level.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 86b8fe398b95..70f041cb50d1 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -166,6 +166,23 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) clean_pmd_entry(pmdp); \ } while (0) +/* + * For 3 levels of paging the PTE_EXT_NG bit will be set for user address ptes + * that are written to a page table but not for ptes created with mk_pte. + * + * In hugetlb_no_page, a new huge pte (new_pte) is generated and passed to + * hugetlb_cow, where it is compared with an entry in a page table. + * This comparison test fails erroneously leading ultimately to a memory leak. + * + * To correct this behaviour, we mask off PTE_EXT_NG for any pte that is + * present before running the comparison. + */ +#define __HAVE_ARCH_PTE_SAME +#define pte_same(pte_a,pte_b) ((pte_present(pte_a) ? pte_val(pte_a) & ~PTE_EXT_NG \ + : pte_val(pte_a)) \ + == (pte_present(pte_b) ? pte_val(pte_b) & ~PTE_EXT_NG \ + : pte_val(pte_b))) + #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext))) #endif /* __ASSEMBLY__ */ -- cgit From 0b19f93351dd68cb68a1a5b2d74e13d2ddfcfc64 Mon Sep 17 00:00:00 2001 From: Steve Capper Date: Fri, 17 May 2013 12:33:28 +0100 Subject: ARM: mm: Add support for flushing HugeTLB pages. On ARM we use the __flush_dcache_page function to flush the dcache of pages when needed; usually when the PG_dcache_clean bit is unset and we are setting a PTE. A HugeTLB page is represented as a compound page consisting of an array of pages. Thus to flush the dcache of a HugeTLB page, one must flush more than a single page. This patch modifies __flush_dcache_page such that all constituent pages of a HugeTLB page are flushed. Signed-off-by: Steve Capper Reviewed-by: Will Deacon --- arch/arm/mm/flush.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 0d473cce501c..370640780d57 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "mm.h" @@ -168,19 +169,23 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) * coherent with the kernels mapping. */ if (!PageHighMem(page)) { - __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); + size_t page_size = PAGE_SIZE << compound_order(page); + __cpuc_flush_dcache_area(page_address(page), page_size); } else { - void *addr; - + unsigned long i; if (cache_is_vipt_nonaliasing()) { - addr = kmap_atomic(page); - __cpuc_flush_dcache_area(addr, PAGE_SIZE); - kunmap_atomic(addr); - } else { - addr = kmap_high_get(page); - if (addr) { + for (i = 0; i < (1 << compound_order(page)); i++) { + void *addr = kmap_atomic(page); __cpuc_flush_dcache_area(addr, PAGE_SIZE); - kunmap_high(page); + kunmap_atomic(addr); + } + } else { + for (i = 0; i < (1 << compound_order(page)); i++) { + void *addr = kmap_high_get(page); + if (addr) { + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + kunmap_high(page); + } } } } -- cgit From 1355e2a6eb88f04d76125c057dc5fca64d4b6a9e Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 25 Jul 2012 14:32:38 +0100 Subject: ARM: mm: HugeTLB support for LPAE systems. This patch adds support for hugetlbfs based on the x86 implementation. It allows mapping of 2MB sections (see Documentation/vm/hugetlbpage.txt for usage). The 64K pages configuration is not supported (section size is 512MB in this case). Signed-off-by: Catalin Marinas [steve.capper@linaro.org: symbolic constants replace numbers in places. Split up into multiple files, to simplify future non-LPAE support, removed huge_pmd_share code, as this is very rarely executed, Added PROT_NONE support]. Signed-off-by: Steve Capper Reviewed-by: Will Deacon --- arch/arm/Kconfig | 4 ++ arch/arm/include/asm/hugetlb-3level.h | 71 +++++++++++++++++++ arch/arm/include/asm/hugetlb.h | 84 +++++++++++++++++++++++ arch/arm/include/asm/pgtable-3level-hwdef.h | 2 + arch/arm/include/asm/pgtable-3level.h | 11 +++ arch/arm/mm/Makefile | 1 + arch/arm/mm/dma-mapping.c | 2 +- arch/arm/mm/fsr-3level.c | 2 +- arch/arm/mm/hugetlbpage.c | 101 ++++++++++++++++++++++++++++ 9 files changed, 276 insertions(+), 2 deletions(-) create mode 100644 arch/arm/include/asm/hugetlb-3level.h create mode 100644 arch/arm/include/asm/hugetlb.h create mode 100644 arch/arm/mm/hugetlbpage.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49d993cee512..860f034653a8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1707,6 +1707,10 @@ config HW_PERF_EVENTS Enable hardware performance counter support for perf events. If disabled, perf events will use software events only. +config SYS_SUPPORTS_HUGETLBFS + def_bool y + depends on ARM_LPAE + source "mm/Kconfig" config FORCE_MAX_ZONEORDER diff --git a/arch/arm/include/asm/hugetlb-3level.h b/arch/arm/include/asm/hugetlb-3level.h new file mode 100644 index 000000000000..d4014fbe5ea3 --- /dev/null +++ b/arch/arm/include/asm/hugetlb-3level.h @@ -0,0 +1,71 @@ +/* + * arch/arm/include/asm/hugetlb-3level.h + * + * Copyright (C) 2012 ARM Ltd. + * + * Based on arch/x86/include/asm/hugetlb.h. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_ARM_HUGETLB_3LEVEL_H +#define _ASM_ARM_HUGETLB_3LEVEL_H + + +/* + * If our huge pte is non-zero then mark the valid bit. + * This allows pte_present(huge_ptep_get(ptep)) to return true for non-zero + * ptes. + * (The valid bit is automatically cleared by set_pte_at for PROT_NONE ptes). + */ +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + pte_t retval = *ptep; + if (pte_val(retval)) + pte_val(retval) |= L_PTE_VALID; + return retval; +} + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ + ptep_clear_flush(vma, addr, ptep); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return ptep_get_and_clear(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +#endif /* _ASM_ARM_HUGETLB_3LEVEL_H */ diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h new file mode 100644 index 000000000000..1f1b1cd112f3 --- /dev/null +++ b/arch/arm/include/asm/hugetlb.h @@ -0,0 +1,84 @@ +/* + * arch/arm/include/asm/hugetlb.h + * + * Copyright (C) 2012 ARM Ltd. + * + * Based on arch/x86/include/asm/hugetlb.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_ARM_HUGETLB_H +#define _ASM_ARM_HUGETLB_H + +#include +#include + +#include + +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, + unsigned long addr, unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, unsigned long len) +{ + return 0; +} + +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + struct hstate *h = hstate_file(file); + if (len & ~huge_page_mask(h)) + return -EINVAL; + if (addr & ~huge_page_mask(h)) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +static inline void arch_clear_hugepage_flags(struct page *page) +{ + clear_bit(PG_dcache_clean, &page->flags); +} + +#endif /* _ASM_ARM_HUGETLB_H */ diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index 18f5cef82ad5..42df407ee3e3 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -30,6 +30,7 @@ #define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) #define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0) #define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0) +#define PMD_TABLE_BIT (_AT(pmdval_t, 1) << 1) #define PMD_BIT4 (_AT(pmdval_t, 0)) #define PMD_DOMAIN(x) (_AT(pmdval_t, 0)) #define PMD_APTABLE_SHIFT (61) @@ -66,6 +67,7 @@ #define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) #define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) #define PTE_TYPE_PAGE (_AT(pteval_t, 3) << 0) +#define PTE_TABLE_BIT (_AT(pteval_t, 1) << 1) #define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */ #define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */ #define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 70f041cb50d1..d1bcd8226cb1 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -61,6 +61,14 @@ #define USER_PTRS_PER_PGD (PAGE_OFFSET / PGDIR_SIZE) +/* + * Hugetlb definitions. + */ +#define HPAGE_SHIFT PMD_SHIFT +#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) + /* * "Linux" PTE definitions for LPAE. * @@ -185,6 +193,9 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext))) +#define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT)) +#define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT)) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_PGTABLE_3LEVEL_H */ diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 9e51be96f635..224a9cc09877 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o obj-$(CONFIG_HIGHMEM) += highmem.o +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ef3e0f3aac96..9674476a75dc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -250,7 +250,7 @@ static void __dma_free_buffer(struct page *page, size_t size) #ifdef CONFIG_MMU #ifdef CONFIG_HUGETLB_PAGE -#error ARM Coherent DMA allocator does not (yet) support huge TLB +#warning ARM Coherent DMA allocator does not (yet) support huge TLB #endif static void *__alloc_from_contiguous(struct device *dev, size_t size, diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c index 05a4e9431836..e115fc7a69bd 100644 --- a/arch/arm/mm/fsr-3level.c +++ b/arch/arm/mm/fsr-3level.c @@ -13,7 +13,7 @@ static struct fsr_info fsr_info[] = { { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" }, { do_bad, SIGBUS, 0, "reserved permission fault" }, { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" }, - { do_sect_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" }, { do_bad, SIGBUS, 0, "synchronous external abort" }, { do_bad, SIGBUS, 0, "asynchronous external abort" }, diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c new file mode 100644 index 000000000000..3d1e4a205b0b --- /dev/null +++ b/arch/arm/mm/hugetlbpage.c @@ -0,0 +1,101 @@ +/* + * arch/arm/mm/hugetlbpage.c + * + * Copyright (C) 2012 ARM Ltd. + * + * Based on arch/x86/include/asm/hugetlb.h and Bill Carson's patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * On ARM, huge pages are backed by pmd's rather than pte's, so we do a lot + * of type casting from pmd_t * to pte_t *. + */ + +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd = NULL; + + pgd = pgd_offset(mm, addr); + if (pgd_present(*pgd)) { + pud = pud_offset(pgd, addr); + if (pud_present(*pud)) + pmd = pmd_offset(pud, addr); + } + + return (pte_t *)pmd; +} + +struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, + int write) +{ + return ERR_PTR(-EINVAL); +} + +int pud_huge(pud_t pud) +{ + return 0; +} + +int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) +{ + return 0; +} + +pte_t *huge_pte_alloc(struct mm_struct *mm, + unsigned long addr, unsigned long sz) +{ + pgd_t *pgd; + pud_t *pud; + pte_t *pte = NULL; + + pgd = pgd_offset(mm, addr); + pud = pud_alloc(mm, pgd, addr); + if (pud) + pte = (pte_t *)pmd_alloc(mm, pud, addr); + + return pte; +} + +struct page * +follow_huge_pmd(struct mm_struct *mm, unsigned long address, + pmd_t *pmd, int write) +{ + struct page *page; + + page = pte_page(*(pte_t *)pmd); + if (page) + page += ((address & ~PMD_MASK) >> PAGE_SHIFT); + return page; +} + +int pmd_huge(pmd_t pmd) +{ + return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); +} -- cgit From 8d962507007357d6fbbcbdd1647faa389a9aed6d Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 25 Jul 2012 14:39:26 +0100 Subject: ARM: mm: Transparent huge page support for LPAE systems. The patch adds support for THP (transparent huge pages) to LPAE systems. When this feature is enabled, the kernel tries to map anonymous pages as 2MB sections where possible. Signed-off-by: Catalin Marinas [steve.capper@linaro.org: symbolic constants used, value of PMD_SECT_SPLITTING adjusted, tlbflush.h included in pgtable.h, added PROT_NONE support.] Signed-off-by: Steve Capper Reviewed-by: Will Deacon --- arch/arm/Kconfig | 4 ++ arch/arm/include/asm/pgtable-3level-hwdef.h | 2 + arch/arm/include/asm/pgtable-3level.h | 60 +++++++++++++++++++++++++++++ arch/arm/include/asm/pgtable.h | 3 ++ arch/arm/include/asm/tlb.h | 6 +++ arch/arm/include/asm/tlbflush.h | 2 + arch/arm/mm/fsr-3level.c | 2 +- 7 files changed, 78 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 860f034653a8..f07a46271168 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1711,6 +1711,10 @@ config SYS_SUPPORTS_HUGETLBFS def_bool y depends on ARM_LPAE +config HAVE_ARCH_TRANSPARENT_HUGEPAGE + def_bool y + depends on ARM_LPAE + source "mm/Kconfig" config FORCE_MAX_ZONEORDER diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index 42df407ee3e3..f088c864c992 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -42,6 +42,8 @@ */ #define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) #define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) +#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */ +#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */ #define PMD_SECT_S (_AT(pmdval_t, 3) << 8) #define PMD_SECT_AF (_AT(pmdval_t, 1) << 10) #define PMD_SECT_nG (_AT(pmdval_t, 1) << 11) diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index d1bcd8226cb1..54733e5ef7a1 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -87,6 +87,11 @@ #define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ #define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */ +#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) +#define PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55) +#define PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56) +#define PMD_SECT_NONE (_AT(pmdval_t, 1) << 57) + /* * To be used in assembly code with the upper page attributes. */ @@ -196,6 +201,61 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) #define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT)) #define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT)) +#define pmd_young(pmd) (pmd_val(pmd) & PMD_SECT_AF) + +#define __HAVE_ARCH_PMD_WRITE +#define pmd_write(pmd) (!(pmd_val(pmd) & PMD_SECT_RDONLY)) + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT)) +#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING) +#endif + +#define PMD_BIT_FUNC(fn,op) \ +static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; } + +PMD_BIT_FUNC(wrprotect, |= PMD_SECT_RDONLY); +PMD_BIT_FUNC(mkold, &= ~PMD_SECT_AF); +PMD_BIT_FUNC(mksplitting, |= PMD_SECT_SPLITTING); +PMD_BIT_FUNC(mkwrite, &= ~PMD_SECT_RDONLY); +PMD_BIT_FUNC(mkdirty, |= PMD_SECT_DIRTY); +PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); + +#define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT)) + +#define pmd_pfn(pmd) (((pmd_val(pmd) & PMD_MASK) & PHYS_MASK) >> PAGE_SHIFT) +#define pfn_pmd(pfn,prot) (__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))) +#define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) + +/* represent a notpresent pmd by zero, this is used by pmdp_invalidate */ +#define pmd_mknotpresent(pmd) (__pmd(0)) + +static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) +{ + const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | PMD_SECT_RDONLY | + PMD_SECT_VALID | PMD_SECT_NONE; + pmd_val(pmd) = (pmd_val(pmd) & ~mask) | (pgprot_val(newprot) & mask); + return pmd; +} + +static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, pmd_t pmd) +{ + BUG_ON(addr >= TASK_SIZE); + + /* create a faulting entry if PROT_NONE protected */ + if (pmd_val(pmd) & PMD_SECT_NONE) + pmd_val(pmd) &= ~PMD_SECT_VALID; + + *pmdp = __pmd(pmd_val(pmd) | PMD_SECT_nG); + flush_pmd_entry(pmdp); +} + +static inline int has_transparent_hugepage(void) +{ + return 1; +} + #endif /* __ASSEMBLY__ */ #endif /* _ASM_PGTABLE_3LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 9bcd262a9008..eaedce7b7e3a 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -24,6 +24,9 @@ #include #include + +#include + #ifdef CONFIG_ARM_LPAE #include #else diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a19512ee26..bdc62da2f212 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -223,6 +223,12 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, #endif } +static inline void +tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr) +{ + tlb_add_flush(tlb, addr); +} + #define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) #define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr) #define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a3625d141c1d..c37459299fc9 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -535,6 +535,8 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, } #endif +#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0) + #endif #endif /* CONFIG_MMU */ diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c index e115fc7a69bd..ab4409a2307e 100644 --- a/arch/arm/mm/fsr-3level.c +++ b/arch/arm/mm/fsr-3level.c @@ -9,7 +9,7 @@ static struct fsr_info fsr_info[] = { { do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" }, { do_bad, SIGBUS, 0, "reserved access flag fault" }, { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" }, - { do_bad, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" }, { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" }, { do_bad, SIGBUS, 0, "reserved permission fault" }, { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" }, -- cgit