From ea7743e2719d34eacb4cb206ae227120029d06c6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 15:06:25 +0100 Subject: ARM: pxa: define clock registers as __iomem We should not dereference registers as pointers, so use readl/writel instead for these registers. The clock registers are accessed in multiple files, so we have to change them all at once. I stumbled over these registers while looking at something unrelated. There are in fact other registers with the same problem, but I did not try to address those at this point. Signed-off-by: Arnd Bergmann Acked-by: Stephen Boyd Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/gumstix.c | 6 +++--- arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 8 ++++---- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 2 +- arch/arm/mach-pxa/zeus.c | 2 +- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6815a9357774..9c5b2fb054f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void) { int timeout = 500; - if (!(OSCC & OSCC_OOK)) + if (!(readl(OSCC) & OSCC_OOK)) pr_warn("32kHz clock was not on. Bootloader may need to be updated\n"); else return; - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); do { - if (OSCC & OSCC_OOK) + if (readl(OSCC) & OSCC_OOK) break; udelay(1); } while (--timeout); diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index f1dd62946b36..5537d5601d70 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -134,10 +134,10 @@ /* * PXA2xx specific Core clock definitions */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ +#define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */ +#define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */ +#define CKEN io_p2v(0x41300004) /* Clock Enable Register */ +#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index f4d48d20754e..888bf7ade15a 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -18,7 +18,7 @@ /* * Oscillator Configuration Register (OSCC) */ -#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ +#define OSCC io_p2v(0x41350000) /* Oscillator Configuration Register */ #define OSCC_PEN (1 << 11) /* 13MHz POUT */ diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 515b7ddda8aa..3b94ecfb9426 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -910,7 +910,7 @@ static void __init zeus_map_io(void) PMCR = PSPR = 0; /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */ - OSCC |= OSCC_OON; + writel(readl(OSCC) | OSCC_OON, OSCC); /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...). * float chip selects and PCMCIA */ -- cgit