From af44d180e3de4cb411ce327b147ea3513f0bbbcb Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 22 Oct 2019 16:33:19 +0800 Subject: cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value i.MX8MN has different speed grade definition compared to i.MX8MQ/i.MX8MM, when fuses are NOT written, the default speed_grade should be set to minimum available OPP defined in DT which is 1.2GHz, the corresponding speed_grade value should be 0xb. Fixes: 5b8010ba70d5 ("cpufreq: imx-cpufreq-dt: Add i.MX8MN support") Signed-off-by: Anson Huang Signed-off-by: Viresh Kumar --- drivers/cpufreq/imx-cpufreq-dt.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/cpufreq/imx-cpufreq-dt.c') diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c index 35db14cf3102..85a6efd6b68f 100644 --- a/drivers/cpufreq/imx-cpufreq-dt.c +++ b/drivers/cpufreq/imx-cpufreq-dt.c @@ -44,19 +44,19 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev) mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT; /* - * Early samples without fuses written report "0 0" which means - * consumer segment and minimum speed grading. - * - * According to datasheet minimum speed grading is not supported for - * consumer parts so clamp to 1 to avoid warning for "no OPPs" + * Early samples without fuses written report "0 0" which may NOT + * match any OPP defined in DT. So clamp to minimum OPP defined in + * DT to avoid warning for "no OPPs". * * Applies to i.MX8M series SoCs. */ - if (mkt_segment == 0 && speed_grade == 0 && ( - of_machine_is_compatible("fsl,imx8mm") || - of_machine_is_compatible("fsl,imx8mn") || - of_machine_is_compatible("fsl,imx8mq"))) - speed_grade = 1; + if (mkt_segment == 0 && speed_grade == 0) { + if (of_machine_is_compatible("fsl,imx8mm") || + of_machine_is_compatible("fsl,imx8mq")) + speed_grade = 1; + if (of_machine_is_compatible("fsl,imx8mn")) + speed_grade = 0xb; + } supported_hw[0] = BIT(speed_grade); supported_hw[1] = BIT(mkt_segment); -- cgit