From 5953e2761be088f66fd930dfbf6b36a5a41d82a3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 Jul 2012 22:18:43 +0200 Subject: hwmon: (jc42) Don't reset hysteresis on device removal Restoring the configuration register on device removal has the side effect of also resetting the hysteresis value. This is inconsistent as the other limits are not reset, only hysteresis. So, following the principle of least surprise, preserve the hysteresis value when restoring the configuration register. Signed-off-by: Jean Delvare Cc: Guenter Roeck Signed-off-by: Guenter Roeck --- drivers/hwmon/jc42.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/hwmon/jc42.c') diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 44f189ed414a..e21e43c13156 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -534,9 +534,16 @@ static int jc42_remove(struct i2c_client *client) struct jc42_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &jc42_group); - if (data->config != data->orig_config) - i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, - data->orig_config); + + /* Restore original configuration except hysteresis */ + if ((data->config & ~JC42_CFG_HYST_MASK) != + (data->orig_config & ~JC42_CFG_HYST_MASK)) { + int config; + + config = (data->orig_config & ~JC42_CFG_HYST_MASK) + | (data->config & JC42_CFG_HYST_MASK); + i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config); + } return 0; } -- cgit