From 638c1c07f99b752c14502009b50ffe4dd4de5ae2 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 8 Feb 2017 14:00:21 -0800 Subject: hwmon: (it87) Improve IT8622 support Configuration registers on ITE8622 are different to 8620 and 8628 and require special handling. Also, the chip supports up to 5 pwm controls. Signed-off-by: Guenter Roeck --- drivers/hwmon/it87.c | 67 +++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 59 insertions(+), 8 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 4d9090f89401..11a28b233006 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -295,10 +295,11 @@ struct it87_devices { #define FEAT_SIX_FANS BIT(11) /* Supports six fans */ #define FEAT_10_9MV_ADC BIT(12) #define FEAT_AVCC3 BIT(13) /* Chip supports in9/AVCC3 */ -#define FEAT_SIX_PWM BIT(14) /* Chip supports 6 pwm chn */ -#define FEAT_PWM_FREQ2 BIT(15) /* Separate pwm freq 2 */ -#define FEAT_SIX_TEMP BIT(16) /* Up to 6 temp sensors */ -#define FEAT_VIN3_5V BIT(17) /* VIN3 connected to +5V */ +#define FEAT_FIVE_PWM BIT(14) /* Chip supports 5 pwm chn */ +#define FEAT_SIX_PWM BIT(15) /* Chip supports 6 pwm chn */ +#define FEAT_PWM_FREQ2 BIT(16) /* Separate pwm freq 2 */ +#define FEAT_SIX_TEMP BIT(17) /* Up to 6 temp sensors */ +#define FEAT_VIN3_5V BIT(18) /* VIN3 connected to +5V */ static const struct it87_devices it87_devices[] = { [it87] = { @@ -444,8 +445,8 @@ static const struct it87_devices it87_devices[] = { .suffix = "E", .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS - | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2 | FEAT_AVCC3 - | FEAT_VIN3_5V, + | FEAT_FIVE_PWM | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2 + | FEAT_AVCC3 | FEAT_VIN3_5V, .peci_mask = 0x07, }, [it8628] = { @@ -477,6 +478,8 @@ static const struct it87_devices it87_devices[] = { #define has_in7_internal(data) ((data)->features & FEAT_IN7_INTERNAL) #define has_six_fans(data) ((data)->features & FEAT_SIX_FANS) #define has_avcc3(data) ((data)->features & FEAT_AVCC3) +#define has_five_pwm(data) ((data)->features & (FEAT_FIVE_PWM \ + | FEAT_SIX_PWM)) #define has_six_pwm(data) ((data)->features & FEAT_SIX_PWM) #define has_pwm_freq2(data) ((data)->features & FEAT_PWM_FREQ2) #define has_six_temp(data) ((data)->features & FEAT_SIX_TEMP) @@ -1929,11 +1932,13 @@ static ssize_t show_label(struct device *dev, struct device_attribute *attr, "+5V", "5VSB", "Vbat", + "AVCC", }; static const char * const labels_it8721[] = { "+3.3V", "3VSB", "Vbat", + "+3.3V", }; struct it87_data *data = dev_get_drvdata(dev); int nr = to_sensor_dev_attr(attr)->index; @@ -1952,7 +1957,7 @@ static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0); static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1); static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2); /* AVCC3 */ -static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 3); static umode_t it87_in_is_visible(struct kobject *kobj, struct attribute *attr, int index) @@ -2475,8 +2480,10 @@ static int __init it87_find(int sioaddr, unsigned short *address, else sio_data->skip_in |= BIT(9); - if (!has_six_pwm(config)) + if (!has_five_pwm(config)) sio_data->skip_pwm |= BIT(3) | BIT(4) | BIT(5); + else if (!has_six_pwm(config)) + sio_data->skip_pwm |= BIT(5); if (!has_vid(config)) sio_data->skip_vid = 1; @@ -2620,6 +2627,50 @@ static int __init it87_find(int sioaddr, unsigned short *address, sio_data->skip_fan |= BIT(5); } + /* Check if AVCC is on VIN3 */ + reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG); + if (reg & BIT(0)) + sio_data->internal |= BIT(0); + else + sio_data->skip_in |= BIT(9); + + sio_data->beep_pin = superio_inb(sioaddr, + IT87_SIO_BEEP_PIN_REG) & 0x3f; + } else if (sio_data->type == it8622) { + int reg; + + superio_select(sioaddr, GPIO); + + /* Check for pwm4, fan4 */ + reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG); + if (reg & BIT(6)) + sio_data->skip_fan |= BIT(3); + if (reg & BIT(5)) + sio_data->skip_pwm |= BIT(3); + + /* Check for pwm3, fan3, pwm5, fan5 */ + reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG); + if (reg & BIT(6)) + sio_data->skip_pwm |= BIT(2); + if (reg & BIT(7)) + sio_data->skip_fan |= BIT(2); + if (reg & BIT(3)) + sio_data->skip_pwm |= BIT(4); + if (reg & BIT(1)) + sio_data->skip_fan |= BIT(4); + + /* Check for pwm2, fan2 */ + reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG); + if (reg & BIT(1)) + sio_data->skip_pwm |= BIT(1); + if (reg & BIT(2)) + sio_data->skip_fan |= BIT(1); + + /* Check for AVCC */ + reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG); + if (!(reg & BIT(0))) + sio_data->skip_in |= BIT(9); + sio_data->beep_pin = superio_inb(sioaddr, IT87_SIO_BEEP_PIN_REG) & 0x3f; } else { -- cgit