From bc341a1a98827925082e95db174734fc8bd68af6 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 8 Jan 2022 11:37:19 -0800 Subject: hwmon: (lm90) Re-enable interrupts after alert clears If alert handling is broken, interrupts are disabled after an alert and re-enabled after the alert clears. However, if there is an interrupt handler, this does not apply if alerts were originally disabled and enabled when the driver was loaded. In that case, interrupts will stay disabled after an alert was handled though the alert handler even after the alert condition clears. Address the situation by always re-enabling interrupts after the alert condition clears if there is an interrupt handler. Fixes: 2abdc357c55d9 ("hwmon: (lm90) Unmask hardware interrupt") Cc: Dmitry Osipenko Signed-off-by: Guenter Roeck --- drivers/hwmon/lm90.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index cc5e48fe304b..e4ecf3440d7c 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -848,7 +848,7 @@ static int lm90_update_device(struct device *dev) * Re-enable ALERT# output if it was originally enabled and * relevant alarms are all clear */ - if (!(data->config_orig & 0x80) && + if ((client->irq || !(data->config_orig & 0x80)) && !(data->alarms & data->alert_alarms)) { if (data->config & 0x80) { dev_dbg(&client->dev, "Re-enabling ALERT#\n"); -- cgit