From 4c624840ebe2d84b72e4b2ab3e7390dddf74d0a5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Nov 2013 15:25:07 -0800 Subject: i2c: omap: Fix missing device tree flags for omap2 As we claim to support device tree for mach-omap2, we should have the necessary flags in the driver to make it usable. Cc: linux-i2c@vger.kernel.org Acked-by: Wolfram Sang Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/i2c/busses/i2c-omap.c') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 9967a6f9c2ff..f04afd1cafe0 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1037,6 +1037,20 @@ static const struct i2c_algorithm omap_i2c_algo = { }; #ifdef CONFIG_OF +static struct omap_i2c_bus_platform_data omap2420_pdata = { + .rev = OMAP_I2C_IP_VERSION_1, + .flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_BUS_SHIFT_2, +}; + +static struct omap_i2c_bus_platform_data omap2430_pdata = { + .rev = OMAP_I2C_IP_VERSION_1, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 | + OMAP_I2C_FLAG_FORCE_19200_INT_CLK, +}; + static struct omap_i2c_bus_platform_data omap3_pdata = { .rev = OMAP_I2C_IP_VERSION_1, .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, @@ -1055,6 +1069,14 @@ static const struct of_device_id omap_i2c_of_match[] = { .compatible = "ti,omap3-i2c", .data = &omap3_pdata, }, + { + .compatible = "ti,omap2430-i2c", + .data = &omap2430_pdata, + }, + { + .compatible = "ti,omap2420-i2c", + .data = &omap2420_pdata, + }, { }, }; MODULE_DEVICE_TABLE(of, omap_i2c_of_match); -- cgit From 40b13ca8dcac6227109d9df1232787d2ba98052e Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Wed, 27 Nov 2013 15:48:08 +0200 Subject: i2c: omap: raw read and write endian fix All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky Signed-off-by: Taras Kondratiuk Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/i2c/busses/i2c-omap.c') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index a6a891d7970d..a61cbcc9645a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = { static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, int reg, u16 val) { - __raw_writew(val, i2c_dev->base + + writew_relaxed(val, i2c_dev->base + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) { - return __raw_readw(i2c_dev->base + + return readw_relaxed(i2c_dev->base + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } @@ -1140,9 +1140,9 @@ omap_i2c_probe(struct platform_device *pdev) * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2. * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset. * Also since the omap_i2c_read_reg uses reg_map_ip_* a - * raw_readw is done. + * readw_relaxed is done. */ - rev = __raw_readw(dev->base + 0x04); + rev = readw_relaxed(dev->base + 0x04); dev->scheme = OMAP_I2C_SCHEME(rev); switch (dev->scheme) { -- cgit