From 22c78d1cce104072747023d2ae0351bf3f97d725 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 May 2017 12:27:17 +0200 Subject: i2c: break out smbus support into separate file Break out the exported SMBus functions and the emulation layer into a separate file. This also involved splitting up the tracing header into an I2C and an SMBus part. Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-smbus.c | 594 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 594 insertions(+) create mode 100644 drivers/i2c/i2c-core-smbus.c (limited to 'drivers/i2c/i2c-core-smbus.c') diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c new file mode 100644 index 000000000000..10f00a82ec9d --- /dev/null +++ b/drivers/i2c/i2c-core-smbus.c @@ -0,0 +1,594 @@ +/* + * Linux I2C core SMBus and SMBus emulation code + * + * This file contains the SMBus functions which are always included in the I2C + * core because they can be emulated via I2C. SMBus specific extensions + * (e.g. smbalert) are handled in a seperate i2c-smbus module. + * + * All SMBus-related things are written by Frodo Looijaard + * SMBus 2.0 support by Mark Studebaker and + * Jean Delvare + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#include +#include +#include + +#define CREATE_TRACE_POINTS +#include + + +/* The SMBus parts */ + +#define POLY (0x1070U << 3) +static u8 crc8(u16 data) +{ + int i; + + for (i = 0; i < 8; i++) { + if (data & 0x8000) + data = data ^ POLY; + data = data << 1; + } + return (u8)(data >> 8); +} + +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) +{ + int i; + + for (i = 0; i < count; i++) + crc = crc8((crc ^ p[i]) << 8); + return crc; +} + +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) +{ + /* The address will be sent first */ + u8 addr = i2c_8bit_addr_from_msg(msg); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); +} + +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) +{ + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; +} + +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) +{ + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); + + if (rpec != cpec) { + pr_debug("Bad PEC 0x%02x vs. 0x%02x\n", + rpec, cpec); + return -EBADMSG; + } + return 0; +} + +/** + * i2c_smbus_read_byte - SMBus "receive byte" protocol + * @client: Handle to slave device + * + * This executes the SMBus "receive byte" protocol, returning negative errno + * else the byte received from the device. + */ +s32 i2c_smbus_read_byte(const struct i2c_client *client) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte); + +/** + * i2c_smbus_write_byte - SMBus "send byte" protocol + * @client: Handle to slave device + * @value: Byte to be sent + * + * This executes the SMBus "send byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value) +{ + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); +} +EXPORT_SYMBOL(i2c_smbus_write_byte); + +/** + * i2c_smbus_read_byte_data - SMBus "read byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read byte" protocol, returning negative errno + * else a data byte received from the device. + */ +s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data); + return (status < 0) ? status : data.byte; +} +EXPORT_SYMBOL(i2c_smbus_read_byte_data); + +/** + * i2c_smbus_write_byte_data - SMBus "write byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: Byte being written + * + * This executes the SMBus "write byte" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command, + u8 value) +{ + union i2c_smbus_data data; + data.byte = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BYTE_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_byte_data); + +/** + * i2c_smbus_read_word_data - SMBus "read word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read word" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_WORD_DATA, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_read_word_data); + +/** + * i2c_smbus_write_word_data - SMBus "write word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "write word" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, + u16 value) +{ + union i2c_smbus_data data; + data.word = value; + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_WORD_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_word_data); + +/** + * i2c_smbus_read_block_data - SMBus "block read" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most 32 bytes. + * + * This executes the SMBus "block read" protocol, returning negative errno + * else the number of data bytes in the slave's response. + * + * Note that using this function requires that the client's adapter support + * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers + * support this; its emulation through I2C messaging relies on a specific + * mechanism (I2C_M_RECV_LEN) which may not be implemented. + */ +s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, + u8 *values) +{ + union i2c_smbus_data data; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_DATA, &data); + if (status) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_block_data); + +/** + * i2c_smbus_write_block_data - SMBus "block write" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most 32 bytes + * @values: Byte array which will be written. + * + * This executes the SMBus "block write" protocol, returning negative errno + * else zero on success. + */ +s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(&data.block[1], values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_block_data); + +/* Returns the number of read bytes */ +s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, u8 *values) +{ + union i2c_smbus_data data; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + if (status < 0) + return status; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); + +s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, + u8 length, const u8 *values) +{ + union i2c_smbus_data data; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + memcpy(data.block + 1, values, length); + return i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); +} +EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); + +/* Simulate a SMBus command using the i2c protocol + No checking of parameters is done! */ +static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + /* So we need to generate a series of msgs. In the case of writing, we + need to use only one message; when reading, we need two. We initialize + most things with sane defaults, to keep the code below somewhat + simpler. */ + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; + int num = read_write == I2C_SMBUS_READ ? 2 : 1; + int i; + u8 partial_pec = 0; + int status; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = flags, + .len = 1, + .buf = msgbuf0, + }, { + .addr = addr, + .flags = flags | I2C_M_RD, + .len = 0, + .buf = msgbuf1, + }, + }; + + msgbuf0[0] = command; + switch (size) { + case I2C_SMBUS_QUICK: + msg[0].len = 0; + /* Special case: The read/write field is used as data */ + msg[0].flags = flags | (read_write == I2C_SMBUS_READ ? + I2C_M_RD : 0); + num = 1; + break; + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_READ) { + /* Special case: only a read! */ + msg[0].flags = I2C_M_RD | flags; + num = 1; + } + break; + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 1; + else { + msg[0].len = 2; + msgbuf0[1] = data->byte; + } + break; + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_READ) + msg[1].len = 2; + else { + msg[0].len = 3; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + } + break; + case I2C_SMBUS_PROC_CALL: + num = 2; /* Special case */ + read_write = I2C_SMBUS_READ; + msg[0].len = 3; + msg[1].len = 2; + msgbuf0[1] = data->word & 0xff; + msgbuf0[2] = data->word >> 8; + break; + case I2C_SMBUS_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + } else { + msg[0].len = data->block[0] + 2; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + } + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + num = 2; /* Another special case */ + read_write = I2C_SMBUS_READ; + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + msg[0].len = data->block[0] + 2; + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + msg[1].len = data->block[0]; + } else { + msg[0].len = data->block[0] + 1; + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; + } + for (i = 1; i <= data->block[0]; i++) + msgbuf0[i] = data->block[i]; + } + break; + default: + dev_err(&adapter->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + + status = i2c_transfer(adapter, msg, num); + if (status < 0) + return status; + + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); + if (status < 0) + return status; + } + + if (read_write == I2C_SMBUS_READ) + switch (size) { + case I2C_SMBUS_BYTE: + data->byte = msgbuf0[0]; + break; + case I2C_SMBUS_BYTE_DATA: + data->byte = msgbuf1[0]; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + data->word = msgbuf1[0] | (msgbuf1[1] << 8); + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + for (i = 0; i < data->block[0]; i++) + data->block[i+1] = msgbuf1[i]; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + for (i = 0; i < msgbuf1[0] + 1; i++) + data->block[i] = msgbuf1[i]; + break; + } + return 0; +} + +/** + * i2c_smbus_xfer - execute SMBus protocol operations + * @adapter: Handle to I2C bus + * @addr: Address of SMBus slave on that bus + * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) + * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE + * @command: Byte interpreted by slave, for protocols which use such bytes + * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL + * @data: Data to be read or written + * + * This executes an SMBus protocol operation, and returns a negative + * errno code else zero on success. + */ +s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags, + char read_write, u8 command, int protocol, + union i2c_smbus_data *data) +{ + unsigned long orig_jiffies; + int try; + s32 res; + + /* If enabled, the following two tracepoints are conditional on + * read_write and protocol. + */ + trace_smbus_write(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_read(adapter, addr, flags, read_write, + command, protocol); + + flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB; + + if (adapter->algo->smbus_xfer) { + i2c_lock_bus(adapter, I2C_LOCK_SEGMENT); + + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= adapter->retries; try++) { + res = adapter->algo->smbus_xfer(adapter, addr, flags, + read_write, command, + protocol, data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + adapter->timeout)) + break; + } + i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT); + + if (res != -EOPNOTSUPP || !adapter->algo->master_xfer) + goto trace; + /* + * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't + * implement native support for the SMBus operation. + */ + } + + res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write, + command, protocol, data); + +trace: + /* If enabled, the reply tracepoint is conditional on read_write. */ + trace_smbus_reply(adapter, addr, flags, read_write, + command, protocol, data); + trace_smbus_result(adapter, addr, flags, read_write, + command, protocol, res); + + return res; +} +EXPORT_SYMBOL(i2c_smbus_xfer); + +/** + * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most + * I2C_SMBUS_BLOCK_MAX bytes. + * + * This executes the SMBus "block read" protocol if supported by the adapter. + * If block read is not supported, it emulates it using either word or byte + * read protocols depending on availability. + * + * The addresses of the I2C slave device that are accessed with this function + * must be mapped to a linear region, so that a block read will have the same + * effect as a byte read. Before using this function you must double-check + * if the I2C slave does support exchanging a block transfer with a byte + * transfer. + */ +s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, + u8 command, u8 length, u8 *values) +{ + u8 i = 0; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return i2c_smbus_read_i2c_block_data(client, command, length, values); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) + return -EOPNOTSUPP; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) { + while ((i + 2) <= length) { + status = i2c_smbus_read_word_data(client, command + i); + if (status < 0) + return status; + values[i] = status & 0xff; + values[i + 1] = status >> 8; + i += 2; + } + } + + while (i < length) { + status = i2c_smbus_read_byte_data(client, command + i); + if (status < 0) + return status; + values[i] = status; + i++; + } + + return i; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); -- cgit