From b7fb14d3ac63117e0e8beabe75f4ea52051fbe3a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 16 Jun 2021 15:46:58 +0200 Subject: ide: remove the legacy ide driver The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/ide/icside.c | 692 --------------------------------------------------- 1 file changed, 692 deletions(-) delete mode 100644 drivers/ide/icside.c (limited to 'drivers/ide/icside.c') diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c deleted file mode 100644 index 329c7e4bc9d0..000000000000 --- a/drivers/ide/icside.c +++ /dev/null @@ -1,692 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 1996-2004 Russell King. - * - * Please note that this platform does not support 32-bit IDE IO. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "icside" - -#define ICS_IDENT_OFFSET 0x2280 - -#define ICS_ARCIN_V5_INTRSTAT 0x0000 -#define ICS_ARCIN_V5_INTROFFSET 0x0004 -#define ICS_ARCIN_V5_IDEOFFSET 0x2800 -#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80 -#define ICS_ARCIN_V5_IDESTEPPING 6 - -#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000 -#define ICS_ARCIN_V6_INTROFFSET_1 0x2200 -#define ICS_ARCIN_V6_INTRSTAT_1 0x2290 -#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380 -#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000 -#define ICS_ARCIN_V6_INTROFFSET_2 0x3200 -#define ICS_ARCIN_V6_INTRSTAT_2 0x3290 -#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380 -#define ICS_ARCIN_V6_IDESTEPPING 6 - -struct cardinfo { - unsigned int dataoffset; - unsigned int ctrloffset; - unsigned int stepping; -}; - -static struct cardinfo icside_cardinfo_v5 = { - .dataoffset = ICS_ARCIN_V5_IDEOFFSET, - .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET, - .stepping = ICS_ARCIN_V5_IDESTEPPING, -}; - -static struct cardinfo icside_cardinfo_v6_1 = { - .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1, - .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1, - .stepping = ICS_ARCIN_V6_IDESTEPPING, -}; - -static struct cardinfo icside_cardinfo_v6_2 = { - .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2, - .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2, - .stepping = ICS_ARCIN_V6_IDESTEPPING, -}; - -struct icside_state { - unsigned int channel; - unsigned int enabled; - void __iomem *irq_port; - void __iomem *ioc_base; - unsigned int sel; - unsigned int type; - struct ide_host *host; -}; - -#define ICS_TYPE_A3IN 0 -#define ICS_TYPE_A3USER 1 -#define ICS_TYPE_V6 3 -#define ICS_TYPE_V5 15 -#define ICS_TYPE_NOTYPE ((unsigned int)-1) - -/* ---------------- Version 5 PCB Support Functions --------------------- */ -/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) - * Purpose : enable interrupts from card - */ -static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) -{ - struct icside_state *state = ec->irq_data; - - writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET); -} - -/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) - * Purpose : disable interrupts from card - */ -static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) -{ - struct icside_state *state = ec->irq_data; - - readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET); -} - -static const expansioncard_ops_t icside_ops_arcin_v5 = { - .irqenable = icside_irqenable_arcin_v5, - .irqdisable = icside_irqdisable_arcin_v5, -}; - - -/* ---------------- Version 6 PCB Support Functions --------------------- */ -/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) - * Purpose : enable interrupts from card - */ -static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) -{ - struct icside_state *state = ec->irq_data; - void __iomem *base = state->irq_port; - - state->enabled = 1; - - switch (state->channel) { - case 0: - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); - readb(base + ICS_ARCIN_V6_INTROFFSET_2); - break; - case 1: - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); - readb(base + ICS_ARCIN_V6_INTROFFSET_1); - break; - } -} - -/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) - * Purpose : disable interrupts from card - */ -static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) -{ - struct icside_state *state = ec->irq_data; - - state->enabled = 0; - - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); -} - -/* Prototype: icside_irqprobe(struct expansion_card *ec) - * Purpose : detect an active interrupt from card - */ -static int icside_irqpending_arcin_v6(struct expansion_card *ec) -{ - struct icside_state *state = ec->irq_data; - - return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 || - readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1; -} - -static const expansioncard_ops_t icside_ops_arcin_v6 = { - .irqenable = icside_irqenable_arcin_v6, - .irqdisable = icside_irqdisable_arcin_v6, - .irqpending = icside_irqpending_arcin_v6, -}; - -/* - * Handle routing of interrupts. This is called before - * we write the command to the drive. - */ -static void icside_maskproc(ide_drive_t *drive, int mask) -{ - ide_hwif_t *hwif = drive->hwif; - struct expansion_card *ec = ECARD_DEV(hwif->dev); - struct icside_state *state = ecard_get_drvdata(ec); - unsigned long flags; - - local_irq_save(flags); - - state->channel = hwif->channel; - - if (state->enabled && !mask) { - switch (hwif->channel) { - case 0: - writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); - break; - case 1: - writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - break; - } - } else { - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - } - - local_irq_restore(flags); -} - -static const struct ide_port_ops icside_v6_no_dma_port_ops = { - .maskproc = icside_maskproc, -}; - -#ifdef CONFIG_BLK_DEV_IDEDMA_ICS -/* - * SG-DMA support. - * - * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers. - * There is only one DMA controller per card, which means that only - * one drive can be accessed at one time. NOTE! We do not enforce that - * here, but we rely on the main IDE driver spotting that both - * interfaces use the same IRQ, which should guarantee this. - */ - -/* - * Configure the IOMD to give the appropriate timings for the transfer - * mode being requested. We take the advice of the ATA standards, and - * calculate the cycle time based on the transfer mode, and the EIDE - * MW DMA specs that the drive provides in the IDENTIFY command. - * - * We have the following IOMD DMA modes to choose from: - * - * Type Active Recovery Cycle - * A 250 (250) 312 (550) 562 (800) - * B 187 250 437 - * C 125 (125) 125 (375) 250 (500) - * D 62 125 187 - * - * (figures in brackets are actual measured timings) - * - * However, we also need to take care of the read/write active and - * recovery timings: - * - * Read Write - * Mode Active -- Recovery -- Cycle IOMD type - * MW0 215 50 215 480 A - * MW1 80 50 50 150 C - * MW2 70 25 25 120 C - */ -static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - unsigned long cycle_time = 0; - int use_dma_info = 0; - const u8 xfer_mode = drive->dma_mode; - - switch (xfer_mode) { - case XFER_MW_DMA_2: - cycle_time = 250; - use_dma_info = 1; - break; - - case XFER_MW_DMA_1: - cycle_time = 250; - use_dma_info = 1; - break; - - case XFER_MW_DMA_0: - cycle_time = 480; - break; - - case XFER_SW_DMA_2: - case XFER_SW_DMA_1: - case XFER_SW_DMA_0: - cycle_time = 480; - break; - } - - /* - * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should - * take care to note the values in the ID... - */ - if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time) - cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME]; - - ide_set_drivedata(drive, (void *)cycle_time); - - printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", - drive->name, ide_xfer_verbose(xfer_mode), - 2000 / (cycle_time ? cycle_time : (unsigned long) -1)); -} - -static const struct ide_port_ops icside_v6_port_ops = { - .set_dma_mode = icside_set_dma_mode, - .maskproc = icside_maskproc, -}; - -static void icside_dma_host_set(ide_drive_t *drive, int on) -{ -} - -static int icside_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct expansion_card *ec = ECARD_DEV(hwif->dev); - - disable_dma(ec->dma); - - return get_dma_residue(ec->dma) != 0; -} - -static void icside_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct expansion_card *ec = ECARD_DEV(hwif->dev); - - /* We can not enable DMA on both channels simultaneously. */ - BUG_ON(dma_channel_active(ec->dma)); - enable_dma(ec->dma); -} - -static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - struct expansion_card *ec = ECARD_DEV(hwif->dev); - struct icside_state *state = ecard_get_drvdata(ec); - unsigned int dma_mode; - - if (cmd->tf_flags & IDE_TFLAG_WRITE) - dma_mode = DMA_MODE_WRITE; - else - dma_mode = DMA_MODE_READ; - - /* - * We can not enable DMA on both channels. - */ - BUG_ON(dma_channel_active(ec->dma)); - - /* - * Ensure that we have the right interrupt routed. - */ - icside_maskproc(drive, 0); - - /* - * Route the DMA signals to the correct interface. - */ - writeb(state->sel | hwif->channel, state->ioc_base); - - /* - * Select the correct timing for this drive. - */ - set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive)); - - /* - * Tell the DMA engine about the SG table and - * data direction. - */ - set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents); - set_dma_mode(ec->dma, dma_mode); - - return 0; -} - -static int icside_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct expansion_card *ec = ECARD_DEV(hwif->dev); - struct icside_state *state = ecard_get_drvdata(ec); - - return readb(state->irq_port + - (hwif->channel ? - ICS_ARCIN_V6_INTRSTAT_2 : - ICS_ARCIN_V6_INTRSTAT_1)) & 1; -} - -static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - hwif->dmatable_cpu = NULL; - hwif->dmatable_dma = 0; - - return 0; -} - -static const struct ide_dma_ops icside_v6_dma_ops = { - .dma_host_set = icside_dma_host_set, - .dma_setup = icside_dma_setup, - .dma_start = icside_dma_start, - .dma_end = icside_dma_end, - .dma_test_irq = icside_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, -}; -#endif - -static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - return -EOPNOTSUPP; -} - -static void icside_setup_ports(struct ide_hw *hw, void __iomem *base, - struct cardinfo *info, struct expansion_card *ec) -{ - unsigned long port = (unsigned long)base + info->dataoffset; - - hw->io_ports.data_addr = port; - hw->io_ports.error_addr = port + (1 << info->stepping); - hw->io_ports.nsect_addr = port + (2 << info->stepping); - hw->io_ports.lbal_addr = port + (3 << info->stepping); - hw->io_ports.lbam_addr = port + (4 << info->stepping); - hw->io_ports.lbah_addr = port + (5 << info->stepping); - hw->io_ports.device_addr = port + (6 << info->stepping); - hw->io_ports.status_addr = port + (7 << info->stepping); - hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset; - - hw->irq = ec->irq; - hw->dev = &ec->dev; -} - -static const struct ide_port_info icside_v5_port_info = { - .host_flags = IDE_HFLAG_NO_DMA, - .chipset = ide_acorn, -}; - -static int icside_register_v5(struct icside_state *state, - struct expansion_card *ec) -{ - void __iomem *base; - struct ide_host *host; - struct ide_hw hw, *hws[] = { &hw }; - int ret; - - base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); - if (!base) - return -ENOMEM; - - state->irq_port = base; - - ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT; - ec->irqmask = 1; - - ecard_setirq(ec, &icside_ops_arcin_v5, state); - - /* - * Be on the safe side - disable interrupts - */ - icside_irqdisable_arcin_v5(ec, 0); - - icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); - - host = ide_host_alloc(&icside_v5_port_info, hws, 1); - if (host == NULL) - return -ENODEV; - - state->host = host; - - ecard_set_drvdata(ec, state); - - ret = ide_host_register(host, &icside_v5_port_info, hws); - if (ret) - goto err_free; - - return 0; -err_free: - ide_host_free(host); - ecard_set_drvdata(ec, NULL); - return ret; -} - -static const struct ide_port_info icside_v6_port_info = { - .init_dma = icside_dma_off_init, - .port_ops = &icside_v6_no_dma_port_ops, - .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, - .mwdma_mask = ATA_MWDMA2, - .swdma_mask = ATA_SWDMA2, - .chipset = ide_acorn, -}; - -static int icside_register_v6(struct icside_state *state, - struct expansion_card *ec) -{ - void __iomem *ioc_base, *easi_base; - struct ide_host *host; - unsigned int sel = 0; - int ret; - struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] }; - struct ide_port_info d = icside_v6_port_info; - - ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); - if (!ioc_base) { - ret = -ENOMEM; - goto out; - } - - easi_base = ioc_base; - - if (ecard_resource_flags(ec, ECARD_RES_EASI)) { - easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0); - if (!easi_base) { - ret = -ENOMEM; - goto out; - } - - /* - * Enable access to the EASI region. - */ - sel = 1 << 5; - } - - writeb(sel, ioc_base); - - ecard_setirq(ec, &icside_ops_arcin_v6, state); - - state->irq_port = easi_base; - state->ioc_base = ioc_base; - state->sel = sel; - - /* - * Be on the safe side - disable interrupts - */ - icside_irqdisable_arcin_v6(ec, 0); - - icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); - icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); - - host = ide_host_alloc(&d, hws, 2); - if (host == NULL) - return -ENODEV; - - state->host = host; - - ecard_set_drvdata(ec, state); - -#ifdef CONFIG_BLK_DEV_IDEDMA_ICS - if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { - d.init_dma = icside_dma_init; - d.port_ops = &icside_v6_port_ops; - d.dma_ops = &icside_v6_dma_ops; - } -#endif - - ret = ide_host_register(host, &d, hws); - if (ret) - goto err_free; - - return 0; -err_free: - ide_host_free(host); - if (d.dma_ops) - free_dma(ec->dma); - ecard_set_drvdata(ec, NULL); -out: - return ret; -} - -static int icside_probe(struct expansion_card *ec, const struct ecard_id *id) -{ - struct icside_state *state; - void __iomem *idmem; - int ret; - - ret = ecard_request_resources(ec); - if (ret) - goto out; - - state = kzalloc(sizeof(struct icside_state), GFP_KERNEL); - if (!state) { - ret = -ENOMEM; - goto release; - } - - state->type = ICS_TYPE_NOTYPE; - - idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); - if (idmem) { - unsigned int type; - - type = readb(idmem + ICS_IDENT_OFFSET) & 1; - type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1; - type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2; - type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3; - ecardm_iounmap(ec, idmem); - - state->type = type; - } - - switch (state->type) { - case ICS_TYPE_A3IN: - dev_warn(&ec->dev, "A3IN unsupported\n"); - ret = -ENODEV; - break; - - case ICS_TYPE_A3USER: - dev_warn(&ec->dev, "A3USER unsupported\n"); - ret = -ENODEV; - break; - - case ICS_TYPE_V5: - ret = icside_register_v5(state, ec); - break; - - case ICS_TYPE_V6: - ret = icside_register_v6(state, ec); - break; - - default: - dev_warn(&ec->dev, "unknown interface type\n"); - ret = -ENODEV; - break; - } - - if (ret == 0) - goto out; - - kfree(state); - release: - ecard_release_resources(ec); - out: - return ret; -} - -static void icside_remove(struct expansion_card *ec) -{ - struct icside_state *state = ecard_get_drvdata(ec); - - switch (state->type) { - case ICS_TYPE_V5: - /* FIXME: tell IDE to stop using the interface */ - - /* Disable interrupts */ - icside_irqdisable_arcin_v5(ec, 0); - break; - - case ICS_TYPE_V6: - /* FIXME: tell IDE to stop using the interface */ - if (ec->dma != NO_DMA) - free_dma(ec->dma); - - /* Disable interrupts */ - icside_irqdisable_arcin_v6(ec, 0); - - /* Reset the ROM pointer/EASI selection */ - writeb(0, state->ioc_base); - break; - } - - ecard_set_drvdata(ec, NULL); - - kfree(state); - ecard_release_resources(ec); -} - -static void icside_shutdown(struct expansion_card *ec) -{ - struct icside_state *state = ecard_get_drvdata(ec); - unsigned long flags; - - /* - * Disable interrupts from this card. We need to do - * this before disabling EASI since we may be accessing - * this register via that region. - */ - local_irq_save(flags); - ec->ops->irqdisable(ec, 0); - local_irq_restore(flags); - - /* - * Reset the ROM pointer so that we can read the ROM - * after a soft reboot. This also disables access to - * the IDE taskfile via the EASI region. - */ - if (state->ioc_base) - writeb(0, state->ioc_base); -} - -static const struct ecard_id icside_ids[] = { - { MANU_ICS, PROD_ICS_IDE }, - { MANU_ICS2, PROD_ICS2_IDE }, - { 0xffff, 0xffff } -}; - -static struct ecard_driver icside_driver = { - .probe = icside_probe, - .remove = icside_remove, - .shutdown = icside_shutdown, - .id_table = icside_ids, - .drv = { - .name = "icside", - }, -}; - -static int __init icside_init(void) -{ - return ecard_register_driver(&icside_driver); -} - -static void __exit icside_exit(void) -{ - ecard_remove_driver(&icside_driver); -} - -MODULE_AUTHOR("Russell King "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("ICS IDE driver"); - -module_init(icside_init); -module_exit(icside_exit); -- cgit