From d7ef76717322c8e2df7d4360b33faa9466cb1a0d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 24 Mar 2015 23:23:20 -0400 Subject: intel_idle: Update support for Silvermont Core in Baytrail SOC On some Silvermont-Core/Baytrail-SOC systems, C1E latency is higher than original specifications. Although C1E is still enumerated in CPUID.MWAIT.EDX, we delete the state from intel_idle to avoid latency impact. Under some conditions, the latency of the C6N-BYT and C6S-BYT states may exceed the specified values of 40 and 140 usec, respectively. Increase those values to 300 and 500 usec; to assure that the hardware does not violate constraints that may be set by the Linux PM_QOS sub-system. Also increase the C7-BYT target residency to 4.0 ms from 1.5 ms. Signed-off-by: Len Brown Cc: Kumar P Mahesh Cc: Alan Cox Cc: Mika Westerberg Cc: --- drivers/idle/intel_idle.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'drivers/idle/intel_idle.c') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index b0e58522780d..44d1d7920202 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -217,19 +217,11 @@ static struct cpuidle_state byt_cstates[] = { .target_residency = 1, .enter = &intel_idle, .enter_freeze = intel_idle_freeze, }, - { - .name = "C1E-BYT", - .desc = "MWAIT 0x01", - .flags = MWAIT2flg(0x01), - .exit_latency = 15, - .target_residency = 30, - .enter = &intel_idle, - .enter_freeze = intel_idle_freeze, }, { .name = "C6N-BYT", .desc = "MWAIT 0x58", .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED, - .exit_latency = 40, + .exit_latency = 300, .target_residency = 275, .enter = &intel_idle, .enter_freeze = intel_idle_freeze, }, @@ -237,7 +229,7 @@ static struct cpuidle_state byt_cstates[] = { .name = "C6S-BYT", .desc = "MWAIT 0x52", .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED, - .exit_latency = 140, + .exit_latency = 500, .target_residency = 560, .enter = &intel_idle, .enter_freeze = intel_idle_freeze, }, @@ -246,7 +238,7 @@ static struct cpuidle_state byt_cstates[] = { .desc = "MWAIT 0x60", .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 1200, - .target_residency = 1500, + .target_residency = 4000, .enter = &intel_idle, .enter_freeze = intel_idle_freeze, }, { -- cgit