From cdf3ecb0d8d0a83c940a8892b3e8aeaf35dc4353 Mon Sep 17 00:00:00 2001 From: Anshul Dalal Date: Wed, 20 Dec 2023 20:49:53 +0530 Subject: iio: dac: driver for MCP4821 Adds driver for the MCP48xx series of DACs. Device uses a simplex SPI channel. To set the value of an output channel, a 16-bit data of following format must be written: Bit field | Description 15 [MSB] | Channel selection bit 0 -> Channel A 1 -> Channel B 13 | Output Gain Selection bit 0 -> 2x Gain (Vref = 4.096V) 1 -> 1x Gain (Vref = 2.048V) 12 | Output Shutdown Control bit 0 -> Shutdown the selected channel 1 -> Active mode operation 11-0 [LSB]| DAC Input Data bits Value's big endian representation is taken as input for the selected DAC channel. For devices with a resolution of less than 12-bits, only the x most significant bits are considered where x is the resolution of the device. Reference: Page#22 [MCP48x2 Datasheet] Supported devices: +---------+--------------+-------------+ | Device | Resolution | Channels | |---------|--------------|-------------| | MCP4801 | 8-bit | 1 | | MCP4802 | 8-bit | 2 | | MCP4811 | 10-bit | 1 | | MCP4812 | 10-bit | 2 | | MCP4821 | 12-bit | 1 | | MCP4822 | 12-bit | 2 | +---------+--------------+-------------+ Devices tested: MCP4821 [12-bit single channel] MCP4802 [8-bit dual channel] Tested on Raspberry Pi Zero 2W Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf #MCP48x1 Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf #MCP48x2 Signed-off-by: Anshul Dalal Link: https://lore.kernel.org/r/20231220151954.154595-2-anshulusr@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/dac/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/iio/dac/Kconfig') diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 93b8be183de6..34eb40bb9529 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -400,6 +400,16 @@ config MCP4728 To compile this driver as a module, choose M here: the module will be called mcp4728. +config MCP4821 + tristate "MCP4801/02/11/12/21/22 DAC driver" + depends on SPI + help + Say yes here to build the driver for the Microchip MCP4801 + MCP4802, MCP4811, MCP4812, MCP4821 and MCP4822 DAC devices. + + To compile this driver as a module, choose M here: the module + will be called mcp4821. + config MCP4922 tristate "MCP4902, MCP4912, MCP4922 DAC driver" depends on SPI -- cgit