From 91a86a3b89462a7b0af8553428a6101df33633ac Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 9 Nov 2016 16:10:00 +0100 Subject: iio: pressure: st_pressure: inline per-sensor data We have #defines for all the individual sensor registers and value/mask pairs #defined at the top of the file and used at exactly one spot. This is usually good if the #defines give a meaning to the opaque magic numbers. However in this case, the semantic meaning is inherent in the name of the C99-addressable fields, and that means duplication of information, and only makes the code hard to maintain since you every time have to add a new #define AND update the site where it is to be used. Get rid of the #defines and just open code the values into the appropriate struct elements. Make sure to explicitly address the .hz and .value fields in the st_sensor_odr_avl struct so that the meaning of all values is clear. This patch is purely syntactic should have no semantic effect. Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/st_pressure_core.c | 257 ++++++++++++-------------------- 1 file changed, 92 insertions(+), 165 deletions(-) (limited to 'drivers/iio/pressure/st_pressure_core.c') diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 55df9a75eb3a..e19e0787864c 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -112,115 +112,24 @@ #define ST_PRESS_1_OUT_XL_ADDR 0x28 #define ST_TEMP_1_OUT_L_ADDR 0x2b -/* - * CUSTOM VALUES FOR LPS331AP SENSOR - * See LPS331AP datasheet: - * http://www2.st.com/resource/en/datasheet/lps331ap.pdf - */ -#define ST_PRESS_LPS331AP_WAI_EXP 0xbb -#define ST_PRESS_LPS331AP_ODR_ADDR 0x20 -#define ST_PRESS_LPS331AP_ODR_MASK 0x70 -#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL 0x01 -#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL 0x05 -#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL 0x06 -#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL 0x07 -#define ST_PRESS_LPS331AP_PW_ADDR 0x20 -#define ST_PRESS_LPS331AP_PW_MASK 0x80 -#define ST_PRESS_LPS331AP_FS_ADDR 0x23 -#define ST_PRESS_LPS331AP_FS_MASK 0x30 -#define ST_PRESS_LPS331AP_BDU_ADDR 0x20 -#define ST_PRESS_LPS331AP_BDU_MASK 0x04 -#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22 -#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04 -#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 -#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22 -#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80 -#define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22 -#define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40 -#define ST_PRESS_LPS331AP_MULTIREAD_BIT true - -/* - * CUSTOM VALUES FOR THE OBSOLETE LPS001WP SENSOR - */ - /* LPS001WP pressure resolution */ #define ST_PRESS_LPS001WP_LSB_PER_MBAR 16UL /* LPS001WP temperature resolution */ #define ST_PRESS_LPS001WP_LSB_PER_CELSIUS 64UL - -#define ST_PRESS_LPS001WP_WAI_EXP 0xba -#define ST_PRESS_LPS001WP_ODR_ADDR 0x20 -#define ST_PRESS_LPS001WP_ODR_MASK 0x30 -#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL 0x01 -#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL 0x02 -#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL 0x03 -#define ST_PRESS_LPS001WP_PW_ADDR 0x20 -#define ST_PRESS_LPS001WP_PW_MASK 0x40 +/* LPS001WP pressure gain */ #define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \ (100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR) -#define ST_PRESS_LPS001WP_BDU_ADDR 0x20 -#define ST_PRESS_LPS001WP_BDU_MASK 0x04 -#define ST_PRESS_LPS001WP_MULTIREAD_BIT true +/* LPS001WP pressure and temp L addresses */ #define ST_PRESS_LPS001WP_OUT_L_ADDR 0x28 #define ST_TEMP_LPS001WP_OUT_L_ADDR 0x2a -/* - * CUSTOM VALUES FOR LPS25H SENSOR - * See LPS25H datasheet: - * http://www2.st.com/resource/en/datasheet/lps25h.pdf - */ -#define ST_PRESS_LPS25H_WAI_EXP 0xbd -#define ST_PRESS_LPS25H_ODR_ADDR 0x20 -#define ST_PRESS_LPS25H_ODR_MASK 0x70 -#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL 0x01 -#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL 0x02 -#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL 0x03 -#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04 -#define ST_PRESS_LPS25H_PW_ADDR 0x20 -#define ST_PRESS_LPS25H_PW_MASK 0x80 -#define ST_PRESS_LPS25H_BDU_ADDR 0x20 -#define ST_PRESS_LPS25H_BDU_MASK 0x04 -#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 -#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01 -#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 -#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22 -#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80 -#define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22 -#define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40 -#define ST_PRESS_LPS25H_MULTIREAD_BIT true +/* LPS25H pressure and temp L addresses */ #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 #define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b -/* - * CUSTOM VALUES FOR LPS22HB SENSOR - * See LPS22HB datasheet: - * http://www2.st.com/resource/en/datasheet/lps22hb.pdf - */ - /* LPS22HB temperature sensitivity */ #define ST_PRESS_LPS22HB_LSB_PER_CELSIUS 100UL -#define ST_PRESS_LPS22HB_WAI_EXP 0xb1 -#define ST_PRESS_LPS22HB_ODR_ADDR 0x10 -#define ST_PRESS_LPS22HB_ODR_MASK 0x70 -#define ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL 0x01 -#define ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL 0x02 -#define ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL 0x03 -#define ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL 0x04 -#define ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL 0x05 -#define ST_PRESS_LPS22HB_PW_ADDR 0x10 -#define ST_PRESS_LPS22HB_PW_MASK 0x70 -#define ST_PRESS_LPS22HB_BDU_ADDR 0x10 -#define ST_PRESS_LPS22HB_BDU_MASK 0x02 -#define ST_PRESS_LPS22HB_DRDY_IRQ_ADDR 0x12 -#define ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK 0x04 -#define ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK 0x08 -#define ST_PRESS_LPS22HB_IHL_IRQ_ADDR 0x12 -#define ST_PRESS_LPS22HB_IHL_IRQ_MASK 0x80 -#define ST_PRESS_LPS22HB_OD_IRQ_ADDR 0x12 -#define ST_PRESS_LPS22HB_OD_IRQ_MASK 0x40 -#define ST_PRESS_LPS22HB_MULTIREAD_BIT true - static const struct iio_chan_spec st_press_1_channels[] = { { .type = IIO_PRESSURE, @@ -321,7 +230,12 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = { static const struct st_sensor_settings st_press_sensors_settings[] = { { - .wai = ST_PRESS_LPS331AP_WAI_EXP, + /* + * CUSTOM VALUES FOR LPS331AP SENSOR + * See LPS331AP datasheet: + * http://www2.st.com/resource/en/datasheet/lps331ap.pdf + */ + .wai = 0xbb, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LPS331AP_PRESS_DEV_NAME, @@ -329,24 +243,24 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .ch = (struct iio_chan_spec *)st_press_1_channels, .num_ch = ARRAY_SIZE(st_press_1_channels), .odr = { - .addr = ST_PRESS_LPS331AP_ODR_ADDR, - .mask = ST_PRESS_LPS331AP_ODR_MASK, + .addr = 0x20, + .mask = 0x70, .odr_avl = { - { 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, }, - { 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, }, - { 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, }, - { 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, }, + { .hz = 1, .value = 0x01 }, + { .hz = 7, .value = 0x05 }, + { .hz = 13, .value = 0x06 }, + { .hz = 25, .value = 0x07 }, }, }, .pw = { - .addr = ST_PRESS_LPS331AP_PW_ADDR, - .mask = ST_PRESS_LPS331AP_PW_MASK, + .addr = 0x20, + .mask = 0x80, .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, .fs = { - .addr = ST_PRESS_LPS331AP_FS_ADDR, - .mask = ST_PRESS_LPS331AP_FS_MASK, + .addr = 0x23, + .mask = 0x30, .fs_avl = { /* * Pressure and temperature sensitivity values @@ -360,24 +274,27 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { }, }, .bdu = { - .addr = ST_PRESS_LPS331AP_BDU_ADDR, - .mask = ST_PRESS_LPS331AP_BDU_MASK, + .addr = 0x20, + .mask = 0x04, }, .drdy_irq = { - .addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR, - .mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK, - .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK, - .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR, - .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK, - .addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR, - .mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK, + .addr = 0x22, + .mask_int1 = 0x04, + .mask_int2 = 0x20, + .addr_ihl = 0x22, + .mask_ihl = 0x80, + .addr_od = 0x22, + .mask_od = 0x40, .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, - .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT, + .multi_read_bit = true, .bootime = 2, }, { - .wai = ST_PRESS_LPS001WP_WAI_EXP, + /* + * CUSTOM VALUES FOR LPS001WP SENSOR + */ + .wai = 0xba, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LPS001WP_PRESS_DEV_NAME, @@ -385,17 +302,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .ch = (struct iio_chan_spec *)st_press_lps001wp_channels, .num_ch = ARRAY_SIZE(st_press_lps001wp_channels), .odr = { - .addr = ST_PRESS_LPS001WP_ODR_ADDR, - .mask = ST_PRESS_LPS001WP_ODR_MASK, + .addr = 0x20, + .mask = 0x30, .odr_avl = { - { 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, }, - { 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, }, - { 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, }, + { .hz = 1, .value = 0x01 }, + { .hz = 7, .value = 0x02 }, + { .hz = 13, .value = 0x03 }, }, }, .pw = { - .addr = ST_PRESS_LPS001WP_PW_ADDR, - .mask = ST_PRESS_LPS001WP_PW_MASK, + .addr = 0x20, + .mask = 0x40, .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, @@ -413,17 +330,22 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { }, }, .bdu = { - .addr = ST_PRESS_LPS001WP_BDU_ADDR, - .mask = ST_PRESS_LPS001WP_BDU_MASK, + .addr = 0x20, + .mask = 0x04, }, .drdy_irq = { .addr = 0, }, - .multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT, + .multi_read_bit = true, .bootime = 2, }, { - .wai = ST_PRESS_LPS25H_WAI_EXP, + /* + * CUSTOM VALUES FOR LPS25H SENSOR + * See LPS25H datasheet: + * http://www2.st.com/resource/en/datasheet/lps25h.pdf + */ + .wai = 0xbd, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LPS25H_PRESS_DEV_NAME, @@ -431,18 +353,18 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .ch = (struct iio_chan_spec *)st_press_1_channels, .num_ch = ARRAY_SIZE(st_press_1_channels), .odr = { - .addr = ST_PRESS_LPS25H_ODR_ADDR, - .mask = ST_PRESS_LPS25H_ODR_MASK, + .addr = 0x20, + .mask = 0x70, .odr_avl = { - { 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, }, - { 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, }, - { 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, }, - { 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, }, + { .hz = 1, .value = 0x01 }, + { .hz = 7, .value = 0x02 }, + { .hz = 13, .value = 0x03 }, + { .hz = 25, .value = 0x04 }, }, }, .pw = { - .addr = ST_PRESS_LPS25H_PW_ADDR, - .mask = ST_PRESS_LPS25H_PW_MASK, + .addr = 0x20, + .mask = 0x80, .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, @@ -460,24 +382,29 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { }, }, .bdu = { - .addr = ST_PRESS_LPS25H_BDU_ADDR, - .mask = ST_PRESS_LPS25H_BDU_MASK, + .addr = 0x20, + .mask = 0x04, }, .drdy_irq = { - .addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR, - .mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK, - .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, - .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR, - .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK, - .addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR, - .mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK, + .addr = 0x23, + .mask_int1 = 0x01, + .mask_int2 = 0x10, + .addr_ihl = 0x22, + .mask_ihl = 0x80, + .addr_od = 0x22, + .mask_od = 0x40, .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, - .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, + .multi_read_bit = true, .bootime = 2, }, { - .wai = ST_PRESS_LPS22HB_WAI_EXP, + /* + * CUSTOM VALUES FOR LPS22HB SENSOR + * See LPS22HB datasheet: + * http://www2.st.com/resource/en/datasheet/lps22hb.pdf + */ + .wai = 0xb1, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LPS22HB_PRESS_DEV_NAME, @@ -485,19 +412,19 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .ch = (struct iio_chan_spec *)st_press_lps22hb_channels, .num_ch = ARRAY_SIZE(st_press_lps22hb_channels), .odr = { - .addr = ST_PRESS_LPS22HB_ODR_ADDR, - .mask = ST_PRESS_LPS22HB_ODR_MASK, + .addr = 0x10, + .mask = 0x70, .odr_avl = { - { 1, ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL, }, - { 10, ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL, }, - { 25, ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL, }, - { 50, ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL, }, - { 75, ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL, }, + { .hz = 1, .value = 0x01 }, + { .hz = 10, .value = 0x02 }, + { .hz = 25, .value = 0x03 }, + { .hz = 50, .value = 0x04 }, + { .hz = 75, .value = 0x05 }, }, }, .pw = { - .addr = ST_PRESS_LPS22HB_PW_ADDR, - .mask = ST_PRESS_LPS22HB_PW_MASK, + .addr = 0x10, + .mask = 0x70, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, .fs = { @@ -514,20 +441,20 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { }, }, .bdu = { - .addr = ST_PRESS_LPS22HB_BDU_ADDR, - .mask = ST_PRESS_LPS22HB_BDU_MASK, + .addr = 0x10, + .mask = 0x02, }, .drdy_irq = { - .addr = ST_PRESS_LPS22HB_DRDY_IRQ_ADDR, - .mask_int1 = ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK, - .mask_int2 = ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK, - .addr_ihl = ST_PRESS_LPS22HB_IHL_IRQ_ADDR, - .mask_ihl = ST_PRESS_LPS22HB_IHL_IRQ_MASK, - .addr_od = ST_PRESS_LPS22HB_OD_IRQ_ADDR, - .mask_od = ST_PRESS_LPS22HB_OD_IRQ_MASK, + .addr = 0x12, + .mask_int1 = 0x04, + .mask_int2 = 0x08, + .addr_ihl = 0x12, + .mask_ihl = 0x80, + .addr_od = 0x12, + .mask_od = 0x40, .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, - .multi_read_bit = ST_PRESS_LPS22HB_MULTIREAD_BIT, + .multi_read_bit = true, }, }; -- cgit