From 78367c32bebfe833cd30c855755d863a4ff3fdee Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Wed, 7 Feb 2024 15:20:06 +0200 Subject: iio: adc: ad4130: only set GPIO_CTRL if pin is unused Currently, GPIO_CTRL bits are set even if the pins are used for measurements. GPIO_CTRL bits should only be set if the pin is not used for other functionality. Fix this by only setting the GPIO_CTRL bits if the pin has no other function. Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver") Signed-off-by: Cosmin Tanislav Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240207132007.253768-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad4130.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c index 9daeac16499b..62490424b6ae 100644 --- a/drivers/iio/adc/ad4130.c +++ b/drivers/iio/adc/ad4130.c @@ -1891,10 +1891,14 @@ static int ad4130_setup(struct iio_dev *indio_dev) return ret; /* - * Configure all GPIOs for output. If configured, the interrupt function - * of P2 takes priority over the GPIO out function. + * Configure unused GPIOs for output. If configured, the interrupt + * function of P2 takes priority over the GPIO out function. */ - val = AD4130_IO_CONTROL_GPIO_CTRL_MASK; + val = 0; + for (i = 0; i < AD4130_MAX_GPIOS; i++) + if (st->pins_fn[i + AD4130_AIN2_P1] == AD4130_PIN_FN_NONE) + val |= FIELD_PREP(AD4130_IO_CONTROL_GPIO_CTRL_MASK, BIT(i)); + val |= FIELD_PREP(AD4130_IO_CONTROL_INT_PIN_SEL_MASK, st->int_pin_sel); ret = regmap_write(st->regmap, AD4130_IO_CONTROL_REG, val); -- cgit