From b304605f0a2c25c028e26a9a3f6aa798693a4051 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 30 Aug 2017 17:29:16 -0700 Subject: irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask Initialization of irq_fwd_mask was done using __raw_writel() which happens to work for all cases except when using ARM BE8 which requires writel() (with the proper swapping). Move the initialization of the irq_fwd_mask till later when we have correctly defined our I/O accessors. Signed-off-by: Florian Fainelli Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-bcm7120-l2.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/irqchip/irq-bcm7120-l2.c') diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c index 64c2692070ef..983640eba418 100644 --- a/drivers/irqchip/irq-bcm7120-l2.c +++ b/drivers/irqchip/irq-bcm7120-l2.c @@ -250,12 +250,6 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, if (ret < 0) goto out_free_l1_data; - for (idx = 0; idx < data->n_words; idx++) { - __raw_writel(data->irq_fwd_mask[idx], - data->pair_base[idx] + - data->en_offset[idx]); - } - for (irq = 0; irq < data->num_parent_irqs; irq++) { ret = bcm7120_l2_intc_init_one(dn, data, irq, valid_mask); if (ret) @@ -297,6 +291,10 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, gc->reg_base = data->pair_base[idx]; ct->regs.mask = data->en_offset[idx]; + /* gc->reg_base is defined and so is gc->writel */ + irq_reg_writel(gc, data->irq_fwd_mask[idx], + data->en_offset[idx]); + ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_ack = irq_gc_noop; -- cgit