From 17c13c724b143c835fe3a9109daab524dff3d06f Mon Sep 17 00:00:00 2001 From: Maarten Zanders Date: Fri, 28 Oct 2022 12:56:43 +0200 Subject: leds: lp5523: fix out-of-bounds bug in lp5523_selftest() When not all LED channels of the led chip are configured, the sysfs selftest functionality gives erroneous results and tries to test all channels of the chip. There is a potential for LED overcurrent conditions since the test current will be set to values from out-of-bound regions. It is wrong to use pdata->led_config[i].led_current to skip absent channels as led_config[] only contains the configured LED channels. Instead of iterating over all the physical channels of the device, loop over the available LED configurations and use led->chan_nr to access the correct i2c registers. Keep the zero-check for the LED current as existing users might depend on this to disable a channel. Reported-by: Arne Staessen Signed-off-by: Maarten Zanders Signed-off-by: Pavel Machek --- drivers/leds/leds-lp5523.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers/leds/leds-lp5523.c') diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 369d40b0b65b..e08e3de1428d 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -581,8 +581,8 @@ static ssize_t lp5523_selftest(struct device *dev, struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); struct lp55xx_chip *chip = led->chip; struct lp55xx_platform_data *pdata = chip->pdata; - int i, ret, pos = 0; - u8 status, adc, vdd; + int ret, pos = 0; + u8 status, adc, vdd, i; mutex_lock(&chip->lock); @@ -612,20 +612,21 @@ static ssize_t lp5523_selftest(struct device *dev, vdd--; /* There may be some fluctuation in measurement */ - for (i = 0; i < LP5523_MAX_LEDS; i++) { - /* Skip non-existing channels */ + for (i = 0; i < pdata->num_channels; i++) { + /* Skip disabled channels */ if (pdata->led_config[i].led_current == 0) continue; /* Set default current */ - lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, + lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr, pdata->led_config[i].led_current); - lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff); + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr, + 0xff); /* let current stabilize 2 - 4ms before measurements start */ usleep_range(2000, 4000); lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, - LP5523_EN_LEDTEST | i); + LP5523_EN_LEDTEST | led->chan_nr); /* ADC conversion time is 2.7 ms typically */ usleep_range(3000, 6000); ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); @@ -633,20 +634,22 @@ static ssize_t lp5523_selftest(struct device *dev, goto fail; if (!(status & LP5523_LEDTEST_DONE)) - usleep_range(3000, 6000);/* Was not ready. Wait. */ + usleep_range(3000, 6000); /* Was not ready. Wait. */ ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc); if (ret < 0) goto fail; if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) - pos += sprintf(buf + pos, "LED %d FAIL\n", i); + pos += sprintf(buf + pos, "LED %d FAIL\n", + led->chan_nr); - lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00); + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr, + 0x00); /* Restore current */ - lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, - led->led_current); + lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr, + led->led_current); led++; } if (pos == 0) -- cgit