From 5741a164ff6fb5abbea8548ad0f3846bad2b9aec Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 14 Mar 2018 17:30:22 +0100 Subject: mtd: maps: remove bfin-async-flash driver The blackfin architecture is getting removed, so this driver has become obsolete. Signed-off-by: Arnd Bergmann Signed-off-by: Boris Brezillon --- drivers/mtd/maps/Kconfig | 10 -- drivers/mtd/maps/Makefile | 1 - drivers/mtd/maps/bfin-async-flash.c | 196 ------------------------------------ 3 files changed, 207 deletions(-) delete mode 100644 drivers/mtd/maps/bfin-async-flash.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 542fdf8e81fa..bdc1283f30fb 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -334,16 +334,6 @@ config MTD_PCMCIA_ANONYMOUS If unsure, say N. -config MTD_BFIN_ASYNC - tristate "Blackfin BF533-STAMP Flash Chip Support" - depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS - default y - help - Map driver which allows for simultaneous utilization of - ethernet and CFI parallel flash. - - If compiled as a module, it will be called bfin-async-flash. - config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index b849aaf85c34..51acf1fec19b 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o -obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c deleted file mode 100644 index 41730feeace8..000000000000 --- a/drivers/mtd/maps/bfin-async-flash.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * drivers/mtd/maps/bfin-async-flash.c - * - * Handle the case where flash memory and ethernet mac/phy are - * mapped onto the same async bank. The BF533-STAMP does this - * for example. All board-specific configuration goes in your - * board resources file. - * - * Copyright 2000 Nicolas Pitre - * Copyright 2005-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define pr_devinit(fmt, args...) \ - ({ static const char __fmt[] = fmt; printk(__fmt, ## args); }) - -#define DRIVER_NAME "bfin-async-flash" - -struct async_state { - struct mtd_info *mtd; - struct map_info map; - int enet_flash_pin; - uint32_t flash_ambctl0, flash_ambctl1; - uint32_t save_ambctl0, save_ambctl1; - unsigned long irq_flags; -}; - -static void switch_to_flash(struct async_state *state) -{ - local_irq_save(state->irq_flags); - - gpio_set_value(state->enet_flash_pin, 0); - - state->save_ambctl0 = bfin_read_EBIU_AMBCTL0(); - state->save_ambctl1 = bfin_read_EBIU_AMBCTL1(); - bfin_write_EBIU_AMBCTL0(state->flash_ambctl0); - bfin_write_EBIU_AMBCTL1(state->flash_ambctl1); - SSYNC(); -} - -static void switch_back(struct async_state *state) -{ - bfin_write_EBIU_AMBCTL0(state->save_ambctl0); - bfin_write_EBIU_AMBCTL1(state->save_ambctl1); - SSYNC(); - - gpio_set_value(state->enet_flash_pin, 1); - - local_irq_restore(state->irq_flags); -} - -static map_word bfin_flash_read(struct map_info *map, unsigned long ofs) -{ - struct async_state *state = (struct async_state *)map->map_priv_1; - uint16_t word; - map_word test; - - switch_to_flash(state); - - word = readw(map->virt + ofs); - - switch_back(state); - - test.x[0] = word; - return test; -} - -static void bfin_flash_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - struct async_state *state = (struct async_state *)map->map_priv_1; - - switch_to_flash(state); - - memcpy(to, map->virt + from, len); - - switch_back(state); -} - -static void bfin_flash_write(struct map_info *map, map_word d1, unsigned long ofs) -{ - struct async_state *state = (struct async_state *)map->map_priv_1; - uint16_t d; - - d = d1.x[0]; - - switch_to_flash(state); - - writew(d, map->virt + ofs); - SSYNC(); - - switch_back(state); -} - -static void bfin_flash_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - struct async_state *state = (struct async_state *)map->map_priv_1; - - switch_to_flash(state); - - memcpy(map->virt + to, from, len); - SSYNC(); - - switch_back(state); -} - -static const char * const part_probe_types[] = { - "cmdlinepart", "RedBoot", NULL }; - -static int bfin_flash_probe(struct platform_device *pdev) -{ - struct physmap_flash_data *pdata = dev_get_platdata(&pdev->dev); - struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); - struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1); - struct async_state *state; - - state = kzalloc(sizeof(*state), GFP_KERNEL); - if (!state) - return -ENOMEM; - - state->map.name = DRIVER_NAME; - state->map.read = bfin_flash_read; - state->map.copy_from = bfin_flash_copy_from; - state->map.write = bfin_flash_write; - state->map.copy_to = bfin_flash_copy_to; - state->map.bankwidth = pdata->width; - state->map.size = resource_size(memory); - state->map.virt = (void __iomem *)memory->start; - state->map.phys = memory->start; - state->map.map_priv_1 = (unsigned long)state; - state->enet_flash_pin = platform_get_irq(pdev, 0); - state->flash_ambctl0 = flash_ambctl->start; - state->flash_ambctl1 = flash_ambctl->end; - - if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) { - pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin); - kfree(state); - return -EBUSY; - } - gpio_direction_output(state->enet_flash_pin, 1); - - pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8); - state->mtd = do_map_probe(memory->name, &state->map); - if (!state->mtd) { - gpio_free(state->enet_flash_pin); - kfree(state); - return -ENXIO; - } - - mtd_device_parse_register(state->mtd, part_probe_types, NULL, - pdata->parts, pdata->nr_parts); - - platform_set_drvdata(pdev, state); - - return 0; -} - -static int bfin_flash_remove(struct platform_device *pdev) -{ - struct async_state *state = platform_get_drvdata(pdev); - gpio_free(state->enet_flash_pin); - mtd_device_unregister(state->mtd); - map_destroy(state->mtd); - kfree(state); - return 0; -} - -static struct platform_driver bfin_flash_driver = { - .probe = bfin_flash_probe, - .remove = bfin_flash_remove, - .driver = { - .name = DRIVER_NAME, - }, -}; - -module_platform_driver(bfin_flash_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank"); -- cgit