From a356ab1c3d46513067dddf9484c9f05e10279312 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 28 Jun 2017 18:32:21 +0200 Subject: arcnet: com20020-pci: add support for PCIFB2 card We add support for the PCIFB2 card from EAE. Beside other cards, this card has the backplane mode enabled by default. Signed-off-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/com20020-pci.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers/net/arcnet') diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index f5854ab7dc32..24deb88a37f0 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -201,6 +201,9 @@ static int com20020pci_probe(struct pci_dev *pdev, lp->backplane = (inb(priv->misc) >> (2 + i)) & 0x1; + if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15)) + lp->backplane = 1; + /* Get the dev_id from the PLX rotary coder */ if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) dev->dev_id = 0xc; @@ -385,6 +388,31 @@ static struct com20020_pci_card_info card_info_eae_ma1 = { .flags = ARC_CAN_10MBIT, }; +static struct com20020_pci_card_info card_info_eae_fb2 = { + .name = "EAE PLX-PCI FB2", + .devcount = 1, + .chan_map_tbl = { + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, + }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, + }, + .rotary = 0x0, + .flags = ARC_CAN_10MBIT, +}; + static const struct pci_device_id com20020pci_id_table[] = { { 0x1571, 0xa001, @@ -530,6 +558,12 @@ static const struct pci_device_id com20020pci_id_table[] = { 0, 0, (kernel_ulong_t)&card_info_eae_ma1 }, + { + 0x10B5, 0x9050, + 0x10B5, 0x3294, + 0, 0, + (kernel_ulong_t)&card_info_eae_fb2 + }, { 0x14BA, 0x6000, PCI_ANY_ID, PCI_ANY_ID, -- cgit