From 040e926f5813a5f4cc18dbff7c942d1e52f368f2 Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Tue, 19 Oct 2021 02:08:50 +0200 Subject: net: dsa: qca8k: tidy for loop in setup and add cpu port check Tidy and organize qca8k setup function from multiple for loop. Change for loop in bridge leave/join to scan all port and skip cpu port. No functional change intended. Signed-off-by: Ansuel Smith Signed-off-by: David S. Miller --- drivers/net/dsa/qca8k.c | 74 +++++++++++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 30 deletions(-) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 0992790da6b6..ea7f12778922 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds) if (ret) dev_warn(priv->dev, "mib init failed"); - /* Enable QCA header mode on the cpu port */ - ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port), - QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | - QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); - if (ret) { - dev_err(priv->dev, "failed enabling QCA header mode"); - return ret; - } - - /* Disable forwarding by default on all ports */ + /* Initial setup of all ports */ for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* Disable forwarding by default on all ports */ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), QCA8K_PORT_LOOKUP_MEMBER, 0); if (ret) return ret; - } - /* Disable MAC by default on all ports */ - for (i = 1; i < QCA8K_NUM_PORTS; i++) - qca8k_port_set_status(priv, i, 0); + /* Enable QCA header mode on all cpu ports */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); + if (ret) { + dev_err(priv->dev, "failed enabling QCA header mode"); + return ret; + } + } - /* Forward all unknown frames to CPU port for Linux processing */ + /* Disable MAC by default on all user ports */ + if (dsa_is_user_port(ds, i)) + qca8k_port_set_status(priv, i, 0); + } + + /* Forward all unknown frames to CPU port for Linux processing + * Notice that in multi-cpu config only one port should be set + * for igmp, unknown, multicast and broadcast packet + */ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | @@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; - /* Setup connection between CPU port & user ports */ + /* Setup connection between CPU port & user ports + * Configure specific switch configuration for ports + */ for (i = 0; i < QCA8K_NUM_PORTS; i++) { /* CPU port gets connected to all user ports of the switch */ if (dsa_is_cpu_port(ds, i)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); if (ret) return ret; @@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; } - } - /* The port 5 of the qca8337 have some problem in flood condition. The - * original legacy driver had some specific buffer and priority settings - * for the different port suggested by the QCA switch team. Add this - * missing settings to improve switch stability under load condition. - * This problem is limited to qca8337 and other qca8k switch are not affected. - */ - if (priv->switch_id == QCA8K_ID_QCA8337) { - for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* The port 5 of the qca8337 have some problem in flood condition. The + * original legacy driver had some specific buffer and priority settings + * for the different port suggested by the QCA switch team. Add this + * missing settings to improve switch stability under load condition. + * This problem is limited to qca8337 and other qca8k switch are not affected. + */ + if (priv->switch_id == QCA8K_ID_QCA8337) { switch (i) { /* The 2 CPU port and port 5 requires some different * priority than any other ports. @@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds) QCA8K_PORT_HOL_CTRL1_WRED_EN, mask); } + + /* Set initial MTU for every port. + * We have only have a general MTU setting. So track + * every port and set the max across all port. + */ + priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; } /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ @@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds) } /* Setup our port MTUs to match power on defaults */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) - priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); if (ret) dev_warn(priv->dev, "failed setting MTU settings"); @@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br) cpu_port = dsa_to_port(ds, port)->cpu_dp->index; port_mask = BIT(cpu_port); - for (i = 1; i < QCA8K_NUM_PORTS; i++) { + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + if (dsa_is_cpu_port(ds, i)) + continue; if (dsa_to_port(ds, i)->bridge_dev != br) continue; /* Add this port to the portvlan mask of the other ports @@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br) cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - for (i = 1; i < QCA8K_NUM_PORTS; i++) { + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + if (dsa_is_cpu_port(ds, i)) + continue; if (dsa_to_port(ds, i)->bridge_dev != br) continue; /* Remove this port to the portvlan mask of the other ports -- cgit