From a565f98d7d25ce5125956fc61c47526c8041e531 Mon Sep 17 00:00:00 2001 From: Arınç ÜNAL Date: Fri, 1 Mar 2024 12:42:59 +0200 Subject: net: dsa: mt7530: do not use SW_PHY_RST to reset MT7531 switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the document MT7531 Reference Manual for Development Board v1.0, the SW_PHY_RST bit on the SYS_CTRL register doesn't exist for MT7531. This is likely why forcing link down on all ports is necessary for MT7531. Therefore, do not set SW_PHY_RST on mt7531_setup(). Signed-off-by: Arınç ÜNAL Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 5cfd303b773f..296711fd5c43 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2451,14 +2451,12 @@ mt7531_setup(struct dsa_switch *ds) val = mt7530_read(priv, MT7531_TOP_SIG_SR); priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); - /* all MACs must be forced link-down before sw reset */ + /* Force link down on all ports before internal reset */ for (i = 0; i < MT7530_NUM_PORTS; i++) mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); /* Reset the switch through internal reset */ - mt7530_write(priv, MT7530_SYS_CTRL, - SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | - SYS_CTRL_REG_RST); + mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); if (!priv->p5_sgmii) { mt7531_pll_setup(priv); -- cgit