From ace40aff3cee8a82c39375761ea65cc748aa1623 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Wed, 4 Mar 2015 00:44:34 -0500 Subject: be2net: implement .sriov_configure() PCI callback This patch implements the .sriov_configure() PCI method to allow for runtime enabling/disabling of VFs. The module param "num_vfs" is now deprecated. At the time of driver load the PF-pool resources are allocated to the PF. When the user enables VFs, the resources are then re-distributed across PFs and VFs based on the number of VFs enabled. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 3 - drivers/net/ethernet/emulex/benet/be_main.c | 169 ++++++++++++++++++---------- 2 files changed, 107 insertions(+), 65 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 1c0e2b00db8d..75cb4610423b 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -3879,9 +3879,6 @@ int be_cmd_set_sriov_config(struct be_adapter *adapter, struct be_nic_res_desc nic_vft; } __packed desc; - if (BEx_chip(adapter) || lancer_chip(adapter)) - return 0; - /* PF PCIE descriptor */ be_reset_pcie_desc(&desc.pcie); desc.pcie.hdr.desc_type = PCIE_RESOURCE_DESC_TYPE_V1; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 20305e1e0ec4..5652b005947f 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -30,6 +30,9 @@ MODULE_DESCRIPTION(DRV_DESC " " DRV_VER); MODULE_AUTHOR("Emulex Corporation"); MODULE_LICENSE("GPL"); +/* num_vfs module param is obsolete. + * Use sysfs method to enable/disable VFs. + */ static unsigned int num_vfs; module_param(num_vfs, uint, S_IRUGO); MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize"); @@ -3449,7 +3452,8 @@ static int be_clear(struct be_adapter *adapter) /* Re-configure FW to distribute resources evenly across max-supported * number of VFs, only when VFs are not already enabled. */ - if (be_physfn(adapter) && !pci_vfs_assigned(pdev)) { + if (skyhawk_chip(adapter) && be_physfn(adapter) && + !pci_vfs_assigned(pdev)) { num_vf_qs = be_calculate_vf_qs(adapter, pci_sriov_get_totalvfs(pdev)); be_cmd_set_sriov_config(adapter, adapter->pool_res, @@ -3712,13 +3716,12 @@ static void be_setup_init(struct be_adapter *adapter) static int be_get_sriov_config(struct be_adapter *adapter) { - struct device *dev = &adapter->pdev->dev; struct be_resources res = {0}; int max_vfs, old_vfs; - /* Some old versions of BE3 FW don't report max_vfs value */ be_cmd_get_profile_config(adapter, &res, RESOURCE_LIMITS, 0); + /* Some old versions of BE3 FW don't report max_vfs value */ if (BE3_chip(adapter) && !res.max_vfs) { max_vfs = pci_sriov_get_totalvfs(adapter->pdev); res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0; @@ -3726,35 +3729,49 @@ static int be_get_sriov_config(struct be_adapter *adapter) adapter->pool_res = res; - if (!be_max_vfs(adapter)) { - if (num_vfs) - dev_warn(dev, "SRIOV is disabled. Ignoring num_vfs\n"); - adapter->num_vfs = 0; - return 0; - } - - pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter)); - - /* validate num_vfs module param */ + /* If during previous unload of the driver, the VFs were not disabled, + * then we cannot rely on the PF POOL limits for the TotalVFs value. + * Instead use the TotalVFs value stored in the pci-dev struct. + */ old_vfs = pci_num_vf(adapter->pdev); if (old_vfs) { - dev_info(dev, "%d VFs are already enabled\n", old_vfs); - if (old_vfs != num_vfs) - dev_warn(dev, "Ignoring num_vfs=%d setting\n", num_vfs); + dev_info(&adapter->pdev->dev, "%d VFs are already enabled\n", + old_vfs); + + adapter->pool_res.max_vfs = + pci_sriov_get_totalvfs(adapter->pdev); adapter->num_vfs = old_vfs; - } else { - if (num_vfs > be_max_vfs(adapter)) { - dev_info(dev, "Resources unavailable to init %d VFs\n", - num_vfs); - dev_info(dev, "Limiting to %d VFs\n", - be_max_vfs(adapter)); - } - adapter->num_vfs = min_t(u16, num_vfs, be_max_vfs(adapter)); } return 0; } +static void be_alloc_sriov_res(struct be_adapter *adapter) +{ + int old_vfs = pci_num_vf(adapter->pdev); + u16 num_vf_qs; + int status; + + be_get_sriov_config(adapter); + + if (!old_vfs) + pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter)); + + /* When the HW is in SRIOV capable configuration, the PF-pool + * resources are given to PF during driver load, if there are no + * old VFs. This facility is not available in BE3 FW. + * Also, this is done by FW in Lancer chip. + */ + if (skyhawk_chip(adapter) && be_max_vfs(adapter) && !old_vfs) { + num_vf_qs = be_calculate_vf_qs(adapter, 0); + status = be_cmd_set_sriov_config(adapter, adapter->pool_res, 0, + num_vf_qs); + if (status) + dev_err(&adapter->pdev->dev, + "Failed to optimize SRIOV resources\n"); + } +} + static int be_get_resources(struct be_adapter *adapter) { struct device *dev = &adapter->pdev->dev; @@ -3800,40 +3817,12 @@ static int be_get_resources(struct be_adapter *adapter) be_max_uc(adapter), be_max_mc(adapter), be_max_vlans(adapter)); + /* Sanitize cfg_num_qs based on HW and platform limits */ + adapter->cfg_num_qs = min_t(u16, netif_get_num_default_rss_queues(), + be_max_qs(adapter)); return 0; } -static void be_sriov_config(struct be_adapter *adapter) -{ - struct device *dev = &adapter->pdev->dev; - u16 num_vf_qs; - int status; - - status = be_get_sriov_config(adapter); - if (status) { - dev_err(dev, "Failed to query SR-IOV configuration\n"); - dev_err(dev, "SR-IOV cannot be enabled\n"); - return; - } - - /* When the HW is in SRIOV capable configuration, the PF-pool - * resources are equally distributed across the max-number of - * VFs. The user may request only a subset of the max-vfs to be - * enabled. Based on num_vfs, redistribute the resources across - * num_vfs so that each VF will have access to more number of - * resources. This facility is not available in BE3 FW. - * Also, this is done by FW in Lancer chip. - */ - if (be_max_vfs(adapter) && !pci_num_vf(adapter->pdev)) { - num_vf_qs = be_calculate_vf_qs(adapter, adapter->num_vfs); - status = be_cmd_set_sriov_config(adapter, - adapter->pool_res, - adapter->num_vfs, num_vf_qs); - if (status) - dev_err(dev, "Failed to optimize SR-IOV resources\n"); - } -} - static int be_get_config(struct be_adapter *adapter) { int status, level; @@ -3864,9 +3853,6 @@ static int be_get_config(struct be_adapter *adapter) "Using profile 0x%x\n", profile_id); } - if (!BE2_chip(adapter) && be_physfn(adapter)) - be_sriov_config(adapter); - status = be_get_resources(adapter); if (status) return status; @@ -3876,9 +3862,6 @@ static int be_get_config(struct be_adapter *adapter) if (!adapter->pmac_id) return -ENOMEM; - /* Sanitize cfg_num_qs based on HW and platform limits */ - adapter->cfg_num_qs = min(adapter->cfg_num_qs, be_max_qs(adapter)); - return 0; } @@ -4053,6 +4036,9 @@ static int be_setup(struct be_adapter *adapter) if (!lancer_chip(adapter)) be_cmd_req_native_mode(adapter); + if (!BE2_chip(adapter) && be_physfn(adapter)) + be_alloc_sriov_res(adapter); + status = be_get_config(adapter); if (status) goto err; @@ -5274,7 +5260,6 @@ static int be_drv_init(struct be_adapter *adapter) /* Must be a power of 2 or else MODULO will BUG_ON */ adapter->be_get_temp_freq = 64; - adapter->cfg_num_qs = netif_get_num_default_rss_queues(); return 0; @@ -5598,6 +5583,60 @@ err: dev_err(&adapter->pdev->dev, "EEH resume failed\n"); } +static int be_pci_sriov_configure(struct pci_dev *pdev, int num_vfs) +{ + struct be_adapter *adapter = pci_get_drvdata(pdev); + u16 num_vf_qs; + int status; + + if (!num_vfs) + be_vf_clear(adapter); + + adapter->num_vfs = num_vfs; + + if (adapter->num_vfs == 0 && pci_vfs_assigned(pdev)) { + dev_warn(&pdev->dev, + "Cannot disable VFs while they are assigned\n"); + return -EBUSY; + } + + /* When the HW is in SRIOV capable configuration, the PF-pool resources + * are equally distributed across the max-number of VFs. The user may + * request only a subset of the max-vfs to be enabled. + * Based on num_vfs, redistribute the resources across num_vfs so that + * each VF will have access to more number of resources. + * This facility is not available in BE3 FW. + * Also, this is done by FW in Lancer chip. + */ + if (skyhawk_chip(adapter) && !pci_num_vf(pdev)) { + num_vf_qs = be_calculate_vf_qs(adapter, adapter->num_vfs); + status = be_cmd_set_sriov_config(adapter, adapter->pool_res, + adapter->num_vfs, num_vf_qs); + if (status) + dev_err(&pdev->dev, + "Failed to optimize SR-IOV resources\n"); + } + + status = be_get_resources(adapter); + if (status) + return be_cmd_status(status); + + /* Updating real_num_tx/rx_queues() requires rtnl_lock() */ + rtnl_lock(); + status = be_update_queues(adapter); + rtnl_unlock(); + if (status) + return be_cmd_status(status); + + if (adapter->num_vfs) + status = be_vf_setup(adapter); + + if (!status) + return adapter->num_vfs; + + return 0; +} + static const struct pci_error_handlers be_eeh_handlers = { .error_detected = be_eeh_err_detected, .slot_reset = be_eeh_reset, @@ -5612,6 +5651,7 @@ static struct pci_driver be_driver = { .suspend = be_suspend, .resume = be_pci_resume, .shutdown = be_shutdown, + .sriov_configure = be_pci_sriov_configure, .err_handler = &be_eeh_handlers }; @@ -5625,6 +5665,11 @@ static int __init be_init_module(void) rx_frag_size = 2048; } + if (num_vfs > 0) { + pr_info(DRV_NAME " : Module param num_vfs is obsolete."); + pr_info(DRV_NAME " : Use sysfs method to enable VFs\n"); + } + return pci_register_driver(&be_driver); } module_init(be_init_module); -- cgit