From a4e39b999a584a3f6e5098eec06b7d37d492eeb1 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Mon, 11 Jan 2021 07:17:53 +0200 Subject: igc: Remove unused MII_CR_RESET MII_CR_RESET mask not in use in i225 device and can be removed Signed-off-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_defines.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/ethernet/intel/igc/igc_defines.h') diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index b909f00a79e6..ca460bf1af2f 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -442,7 +442,6 @@ #define MII_CR_POWER_DOWN 0x0800 /* Power down */ #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ #define MII_CR_SPEED_1000 0x0040 #define MII_CR_SPEED_100 0x2000 #define MII_CR_SPEED_10 0x0000 -- cgit From 1fa81e259b49479fc54658a6e6c3ff629e35777a Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Sun, 17 Jan 2021 10:16:45 +0200 Subject: igc: Remove unused MII_CR_SPEED Force PHY speed not supported for i225 devices. MII_CR_SPEED masks not in use in i225 device and can be removed. Signed-off-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_defines.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net/ethernet/intel/igc/igc_defines.h') diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index ca460bf1af2f..59043c3c5657 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -442,9 +442,6 @@ #define MII_CR_POWER_DOWN 0x0800 /* Power down */ #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 /* PHY Status Register */ #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -- cgit From a5d86bd969ea8501cb2e551d3ec8321867bce126 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Sun, 14 Feb 2021 09:17:49 +0200 Subject: igc: Remove unused MII_CR_LOOPBACK MII_CR_LOOPBACK masks not in use in i225 device and can be removed. Signed-off-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_defines.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/ethernet/intel/igc/igc_defines.h') diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index 59043c3c5657..35ed997af075 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -441,7 +441,6 @@ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ #define MII_CR_POWER_DOWN 0x0800 /* Power down */ #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ /* PHY Status Register */ #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -- cgit From 87938851b6efb6d5b44ae93c83226c6f991d5cc1 Mon Sep 17 00:00:00 2001 From: Ederson de Souza Date: Thu, 18 Feb 2021 17:31:04 -0800 Subject: igc: enable auxiliary PHC functions for the i225 The i225 device offers a number of special PTP Hardware Clock features on the Software Defined Pins (SDPs) - much like i210, which is used as inspiration for this patch. It enables two possible functions, namely time stamping external events and periodic output signals. The assignment of PHC functions to the four SDP can be freely chosen by the user. For the external events time stamping, when the SDP (configured as input by user) level changes, an interrupt is generated and the kernel Precision Time Protocol (PTP) is informed. For the periodic output signals, the i225 is configured to generate them (so the SDP level will change periodically) and the driver also has to keep updating the time of the next level change. However, this work is not necessary for some frequencies as the i225 takes care of them (namely, anything with a half-cycle of 500ms, 250ms, 125ms or < 70ms). While i225 allows up to four timers to be used to source the time used on the external events or output signals, this patch uses only one of those timers. Main reason is to keep it simple, as it's not clear how these extra timers would be exposed to users. Note that currently a NIC can expose a single PTP device. Signed-off-by: Ederson de Souza Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_defines.h | 63 ++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'drivers/net/ethernet/intel/igc/igc_defines.h') diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index 35ed997af075..0103dda32f39 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -8,6 +8,8 @@ #define REQ_TX_DESCRIPTOR_MULTIPLE 8 #define REQ_RX_DESCRIPTOR_MULTIPLE 8 +#define IGC_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */ +#define IGC_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ #define IGC_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ /* Definitions for power management and wakeup registers */ @@ -96,6 +98,9 @@ #define IGC_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ #define IGC_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define IGC_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */ +#define IGC_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */ + /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */ #define MAX_JUMBO_FRAME_SIZE 0x2600 @@ -403,6 +408,64 @@ #define IGC_TSYNCTXCTL_START_SYNC 0x80000000 /* initiate sync */ #define IGC_TSYNCTXCTL_TXSYNSIG 0x00000020 /* Sample TX tstamp in PHY sop */ +/* Timer selection bits */ +#define IGC_AUX_IO_TIMER_SEL_SYSTIM0 (0u << 30) /* Select SYSTIM0 for auxiliary time stamp */ +#define IGC_AUX_IO_TIMER_SEL_SYSTIM1 (1u << 30) /* Select SYSTIM1 for auxiliary time stamp */ +#define IGC_AUX_IO_TIMER_SEL_SYSTIM2 (2u << 30) /* Select SYSTIM2 for auxiliary time stamp */ +#define IGC_AUX_IO_TIMER_SEL_SYSTIM3 (3u << 30) /* Select SYSTIM3 for auxiliary time stamp */ +#define IGC_TT_IO_TIMER_SEL_SYSTIM0 (0u << 30) /* Select SYSTIM0 for target time stamp */ +#define IGC_TT_IO_TIMER_SEL_SYSTIM1 (1u << 30) /* Select SYSTIM1 for target time stamp */ +#define IGC_TT_IO_TIMER_SEL_SYSTIM2 (2u << 30) /* Select SYSTIM2 for target time stamp */ +#define IGC_TT_IO_TIMER_SEL_SYSTIM3 (3u << 30) /* Select SYSTIM3 for target time stamp */ + +/* TSAUXC Configuration Bits */ +#define IGC_TSAUXC_EN_TT0 BIT(0) /* Enable target time 0. */ +#define IGC_TSAUXC_EN_TT1 BIT(1) /* Enable target time 1. */ +#define IGC_TSAUXC_EN_CLK0 BIT(2) /* Enable Configurable Frequency Clock 0. */ +#define IGC_TSAUXC_EN_CLK1 BIT(5) /* Enable Configurable Frequency Clock 1. */ +#define IGC_TSAUXC_EN_TS0 BIT(8) /* Enable hardware timestamp 0. */ +#define IGC_TSAUXC_AUTT0 BIT(9) /* Auxiliary Timestamp Taken. */ +#define IGC_TSAUXC_EN_TS1 BIT(10) /* Enable hardware timestamp 0. */ +#define IGC_TSAUXC_AUTT1 BIT(11) /* Auxiliary Timestamp Taken. */ +#define IGC_TSAUXC_PLSG BIT(17) /* Generate a pulse. */ +#define IGC_TSAUXC_DISABLE1 BIT(27) /* Disable SYSTIM0 Count Operation. */ +#define IGC_TSAUXC_DISABLE2 BIT(28) /* Disable SYSTIM1 Count Operation. */ +#define IGC_TSAUXC_DISABLE3 BIT(29) /* Disable SYSTIM2 Count Operation. */ +#define IGC_TSAUXC_DIS_TS_CLEAR BIT(30) /* Disable EN_TT0/1 auto clear. */ +#define IGC_TSAUXC_DISABLE0 BIT(31) /* Disable SYSTIM0 Count Operation. */ + +/* SDP Configuration Bits */ +#define IGC_AUX0_SEL_SDP0 (0u << 0) /* Assign SDP0 to auxiliary time stamp 0. */ +#define IGC_AUX0_SEL_SDP1 (1u << 0) /* Assign SDP1 to auxiliary time stamp 0. */ +#define IGC_AUX0_SEL_SDP2 (2u << 0) /* Assign SDP2 to auxiliary time stamp 0. */ +#define IGC_AUX0_SEL_SDP3 (3u << 0) /* Assign SDP3 to auxiliary time stamp 0. */ +#define IGC_AUX0_TS_SDP_EN (1u << 2) /* Enable auxiliary time stamp trigger 0. */ +#define IGC_AUX1_SEL_SDP0 (0u << 3) /* Assign SDP0 to auxiliary time stamp 1. */ +#define IGC_AUX1_SEL_SDP1 (1u << 3) /* Assign SDP1 to auxiliary time stamp 1. */ +#define IGC_AUX1_SEL_SDP2 (2u << 3) /* Assign SDP2 to auxiliary time stamp 1. */ +#define IGC_AUX1_SEL_SDP3 (3u << 3) /* Assign SDP3 to auxiliary time stamp 1. */ +#define IGC_AUX1_TS_SDP_EN (1u << 5) /* Enable auxiliary time stamp trigger 1. */ +#define IGC_TS_SDP0_SEL_TT0 (0u << 6) /* Target time 0 is output on SDP0. */ +#define IGC_TS_SDP0_SEL_TT1 (1u << 6) /* Target time 1 is output on SDP0. */ +#define IGC_TS_SDP0_SEL_FC0 (2u << 6) /* Freq clock 0 is output on SDP0. */ +#define IGC_TS_SDP0_SEL_FC1 (3u << 6) /* Freq clock 1 is output on SDP0. */ +#define IGC_TS_SDP0_EN (1u << 8) /* SDP0 is assigned to Tsync. */ +#define IGC_TS_SDP1_SEL_TT0 (0u << 9) /* Target time 0 is output on SDP1. */ +#define IGC_TS_SDP1_SEL_TT1 (1u << 9) /* Target time 1 is output on SDP1. */ +#define IGC_TS_SDP1_SEL_FC0 (2u << 9) /* Freq clock 0 is output on SDP1. */ +#define IGC_TS_SDP1_SEL_FC1 (3u << 9) /* Freq clock 1 is output on SDP1. */ +#define IGC_TS_SDP1_EN (1u << 11) /* SDP1 is assigned to Tsync. */ +#define IGC_TS_SDP2_SEL_TT0 (0u << 12) /* Target time 0 is output on SDP2. */ +#define IGC_TS_SDP2_SEL_TT1 (1u << 12) /* Target time 1 is output on SDP2. */ +#define IGC_TS_SDP2_SEL_FC0 (2u << 12) /* Freq clock 0 is output on SDP2. */ +#define IGC_TS_SDP2_SEL_FC1 (3u << 12) /* Freq clock 1 is output on SDP2. */ +#define IGC_TS_SDP2_EN (1u << 14) /* SDP2 is assigned to Tsync. */ +#define IGC_TS_SDP3_SEL_TT0 (0u << 15) /* Target time 0 is output on SDP3. */ +#define IGC_TS_SDP3_SEL_TT1 (1u << 15) /* Target time 1 is output on SDP3. */ +#define IGC_TS_SDP3_SEL_FC0 (2u << 15) /* Freq clock 0 is output on SDP3. */ +#define IGC_TS_SDP3_SEL_FC1 (3u << 15) /* Freq clock 1 is output on SDP3. */ +#define IGC_TS_SDP3_EN (1u << 17) /* SDP3 is assigned to Tsync. */ + /* Transmit Scheduling */ #define IGC_TQAVCTRL_TRANSMIT_MODE_TSN 0x00000001 #define IGC_TQAVCTRL_ENHANCED_QAV 0x00000008 -- cgit