From cb7e125e03274cffa97d74433c876765efffaf6a Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 9 Oct 2017 09:26:25 -0700 Subject: drivers/net/ethernet/qlogic/qed: Fix __qed_spq_block() ordering The __qed_spq_block() function expects an smp_read_barrier_depends() to order a prior READ_ONCE() against a later load that does not depend on the prior READ_ONCE(), an expectation that can fail to be met. This commit therefore replaces the READ_ONCE() with smp_load_acquire() and removes the smp_read_barrier_depends(). Signed-off-by: Paul E. McKenney Cc: Ariel Elior Cc: Cc: --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index be48d9abd001..c1237ec58b6c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -97,9 +97,7 @@ static int __qed_spq_block(struct qed_hwfn *p_hwfn, while (iter_cnt--) { /* Validate we receive completion update */ - if (READ_ONCE(comp_done->done) == 1) { - /* Read updated FW return value */ - smp_read_barrier_depends(); + if (smp_load_acquire(&comp_done->done) == 1) { /* ^^^ */ if (p_fw_ret) *p_fw_ret = comp_done->fw_return_code; return 0; -- cgit From 2aab6b40b03154a263463a5d992ddd7d122a016a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 8 Dec 2017 16:35:40 +0100 Subject: net: sh_eth: do not advertise Gigabit capabilities when not available Not all variants of the sh_eth hardware have Gigabit support. Unfortunately, the current driver doesn't tell the PHY about the limited MAC capabilities. Due to this, if you have a Gigabit capable PHY, the PHY will advertise its Gigabit capability and establish a link at 1Gbit/s, even though the MAC doesn't support it. In order to avoid this, we use the recently introduced phy_set_max_speed() to tell the PHY to not advertise speed higher than 100 MBit/s. Tested on a SH7786 platform, with a Gigabit PHY. Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index db72d13cebb9..75323000c364 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1892,6 +1892,16 @@ static int sh_eth_phy_init(struct net_device *ndev) return PTR_ERR(phydev); } + /* mask with MAC supported features */ + if (mdp->cd->register_type != SH_ETH_REG_GIGABIT) { + int err = phy_set_max_speed(phydev, SPEED_100); + if (err) { + netdev_err(ndev, "failed to limit PHY to 100 Mbit/s\n"); + phy_disconnect(phydev); + return err; + } + } + phy_attached_info(phydev); return 0; -- cgit From 6b782f43d34974c7909306fd9af06241d658a1f7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 11 Dec 2017 09:54:09 +0100 Subject: Revert "ravb: add workaround for clock when resuming with WoL enabled" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit fbf3d034f2ff6264183cfa6845770e8cc2a986c8. As of commit 560869100b99a3da ("clk: renesas: cpg-mssr: Restore module clocks during resume"), the workaround is no longer needed. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 27 ++------------------------- 1 file changed, 2 insertions(+), 25 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 2b962d349f5f..009780df664b 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2308,32 +2308,9 @@ static int __maybe_unused ravb_resume(struct device *dev) struct ravb_private *priv = netdev_priv(ndev); int ret = 0; - if (priv->wol_enabled) { - /* Reduce the usecount of the clock to zero and then - * restore it to its original value. This is done to force - * the clock to be re-enabled which is a workaround - * for renesas-cpg-mssr driver which do not enable clocks - * when resuming from PSCI suspend/resume. - * - * Without this workaround the driver fails to communicate - * with the hardware if WoL was enabled when the system - * entered PSCI suspend. This is due to that if WoL is enabled - * we explicitly keep the clock from being turned off when - * suspending, but in PSCI sleep power is cut so the clock - * is disabled anyhow, the clock driver is not aware of this - * so the clock is not turned back on when resuming. - * - * TODO: once the renesas-cpg-mssr suspend/resume is working - * this clock dance should be removed. - */ - clk_disable(priv->clk); - clk_disable(priv->clk); - clk_enable(priv->clk); - clk_enable(priv->clk); - - /* Set reset mode to rearm the WoL logic */ + /* If WoL is enabled set reset mode to rearm the WoL logic */ + if (priv->wol_enabled) ravb_write(ndev, CCC_OPC_RESET, CCC); - } /* All register have been reset to default values. * Restore all registers which where setup at probe time and -- cgit From 2a9ee696c72a24d63529c76483fcd92d04b1d2b7 Mon Sep 17 00:00:00 2001 From: Branislav Radocaj Date: Tue, 12 Dec 2017 00:13:38 +0100 Subject: net: ethernet: arc: fix error handling in emac_rockchip_probe If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Changes since v2 [1]: * Merged with latest code changes Changes since v1: Update made thanks to David's review, much appreciated David. * Improved inconsistent failure handling of clock rate setting * For completeness of usecase, added arc_emac_probe error handling Signed-off-by: Branislav Radocaj Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_rockchip.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c index c6163874e4e7..16f9bee992fe 100644 --- a/drivers/net/ethernet/arc/emac_rockchip.c +++ b/drivers/net/ethernet/arc/emac_rockchip.c @@ -199,9 +199,11 @@ static int emac_rockchip_probe(struct platform_device *pdev) /* RMII interface needs always a rate of 50MHz */ err = clk_set_rate(priv->refclk, 50000000); - if (err) + if (err) { dev_err(dev, "failed to change reference clock rate (%d)\n", err); + goto out_regulator_disable; + } if (priv->soc_data->need_div_macclk) { priv->macclk = devm_clk_get(dev, "macclk"); @@ -230,12 +232,14 @@ static int emac_rockchip_probe(struct platform_device *pdev) err = arc_emac_probe(ndev, interface); if (err) { dev_err(dev, "failed to probe arc emac (%d)\n", err); - goto out_regulator_disable; + goto out_clk_disable_macclk; } return 0; + out_clk_disable_macclk: - clk_disable_unprepare(priv->macclk); + if (priv->soc_data->need_div_macclk) + clk_disable_unprepare(priv->macclk); out_regulator_disable: if (priv->regulator) regulator_disable(priv->regulator); -- cgit From c009cb842fcc0f84536a9d2692e6f063af5ac5c6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 12 Dec 2017 10:30:29 -0800 Subject: skge: remove redundunt free_irq under spinlock The code to handle multi-port SKGE boards was freeing IRQ twice. The first one was under lock and might sleep. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 6e423f098a60..31efc47c847e 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -4081,7 +4081,6 @@ static void skge_remove(struct pci_dev *pdev) if (hw->ports > 1) { skge_write32(hw, B0_IMSK, 0); skge_read32(hw, B0_IMSK); - free_irq(pdev->irq, hw); } spin_unlock_irq(&hw->hw_lock); -- cgit From 78034f5fdd622520eb843301cf35ce6c626543a7 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Wed, 13 Dec 2017 18:12:09 +0200 Subject: net/mlx4_en: Fix selftest for small MTUs Set the minimal MTU threshold for running loopback selftest. MTU should be big enough to include packet payload, NET_IP_ALIGN, Ethernet headers and preamble length. Fixes: e7c1c2c46201 ("mlx4_en: Added self diagnostics test implementation") Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_selftest.c | 2 +- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c index 88699b181946..946d9db7c8c2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c @@ -185,7 +185,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf) if (priv->mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UC_LOOPBACK) { buf[3] = mlx4_en_test_registers(priv); - if (priv->port_up) + if (priv->port_up && dev->mtu >= MLX4_SELFTEST_LB_MIN_MTU) buf[4] = mlx4_en_test_loopback(priv); } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 1856e279a7e0..2b72677eccd4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -153,6 +153,9 @@ #define SMALL_PACKET_SIZE (256 - NET_IP_ALIGN) #define HEADER_COPY_SIZE (128 - NET_IP_ALIGN) #define MLX4_LOOPBACK_TEST_PAYLOAD (HEADER_COPY_SIZE - ETH_HLEN) +#define PREAMBLE_LEN 8 +#define MLX4_SELFTEST_LB_MIN_MTU (MLX4_LOOPBACK_TEST_PAYLOAD + NET_IP_ALIGN + \ + ETH_HLEN + PREAMBLE_LEN) #define MLX4_EN_MIN_MTU 46 /* VLAN_HLEN is added twice,to support skb vlan tagged with multiple -- cgit From 0bb9fc4f5429ac970181c073aa32e521e20f7b73 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Wed, 13 Dec 2017 18:12:10 +0200 Subject: net/mlx4_core: Fix wrong calculation of free counters The field res_free indicates the total number of counters which are available for allocation (reserved and unreserved). Fixed a bug where the reserved counters were subtracted from res_free before any allocation was performed. Before this fix, free counters which were not reserved could not be allocated. Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha Reviewed-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 04304dd894c6..606a0e0beeae 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -611,7 +611,6 @@ int mlx4_init_resource_tracker(struct mlx4_dev *dev) MLX4_MAX_PORTS; else res_alloc->guaranteed[t] = 0; - res_alloc->res_free -= res_alloc->guaranteed[t]; break; default: break; -- cgit From 5a1647c391ba543a77a400dddf89053ec5c2b7a4 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Wed, 13 Dec 2017 18:12:11 +0200 Subject: net/mlx4_en: Fill all counters under one call of stats lock Before this patch, the stats_lock was acquired twice. In between the locks Driver sent command to gather some more statistics (per priority and counter statistics). If the stats lock was acquired by get statistics NDO in between we would have report out of sync counters. Fix this by collecting all stats from Firmware in advance and then fill the Software structs under one lock. Fixes: 0b131561a7d6 ("net/mlx4_en: Add Flow control statistics display via ethtool") Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_port.c | 57 +++++++++++++++------------- 1 file changed, 31 insertions(+), 26 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index e0eb695318e6..1fa4849a6f56 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -188,7 +188,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct net_device *dev = mdev->pndev[port]; struct mlx4_en_priv *priv = netdev_priv(dev); struct net_device_stats *stats = &dev->stats; - struct mlx4_cmd_mailbox *mailbox; + struct mlx4_cmd_mailbox *mailbox, *mailbox_priority; u64 in_mod = reset << 8 | port; int err; int i, counter_index; @@ -198,6 +198,13 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); if (IS_ERR(mailbox)) return PTR_ERR(mailbox); + + mailbox_priority = mlx4_alloc_cmd_mailbox(mdev->dev); + if (IS_ERR(mailbox_priority)) { + mlx4_free_cmd_mailbox(mdev->dev, mailbox); + return PTR_ERR(mailbox_priority); + } + err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, in_mod, 0, MLX4_CMD_DUMP_ETH_STATS, MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); @@ -206,6 +213,28 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) mlx4_en_stats = mailbox->buf; + memset(&tmp_counter_stats, 0, sizeof(tmp_counter_stats)); + counter_index = mlx4_get_default_counter_index(mdev->dev, port); + err = mlx4_get_counter_stats(mdev->dev, counter_index, + &tmp_counter_stats, reset); + + /* 0xffs indicates invalid value */ + memset(mailbox_priority->buf, 0xff, + sizeof(*flowstats) * MLX4_NUM_PRIORITIES); + + if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_FLOWSTATS_EN) { + memset(mailbox_priority->buf, 0, + sizeof(*flowstats) * MLX4_NUM_PRIORITIES); + err = mlx4_cmd_box(mdev->dev, 0, mailbox_priority->dma, + in_mod | MLX4_DUMP_ETH_STATS_FLOW_CONTROL, + 0, MLX4_CMD_DUMP_ETH_STATS, + MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); + if (err) + goto out; + } + + flowstats = mailbox_priority->buf; + spin_lock_bh(&priv->stats_lock); mlx4_en_fold_software_stats(dev); @@ -345,31 +374,6 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) priv->pkstats.tx_prio[8][0] = be64_to_cpu(mlx4_en_stats->TTOT_novlan); priv->pkstats.tx_prio[8][1] = be64_to_cpu(mlx4_en_stats->TOCT_novlan); - spin_unlock_bh(&priv->stats_lock); - - memset(&tmp_counter_stats, 0, sizeof(tmp_counter_stats)); - counter_index = mlx4_get_default_counter_index(mdev->dev, port); - err = mlx4_get_counter_stats(mdev->dev, counter_index, - &tmp_counter_stats, reset); - - /* 0xffs indicates invalid value */ - memset(mailbox->buf, 0xff, sizeof(*flowstats) * MLX4_NUM_PRIORITIES); - - if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_FLOWSTATS_EN) { - memset(mailbox->buf, 0, - sizeof(*flowstats) * MLX4_NUM_PRIORITIES); - err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, - in_mod | MLX4_DUMP_ETH_STATS_FLOW_CONTROL, - 0, MLX4_CMD_DUMP_ETH_STATS, - MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); - if (err) - goto out; - } - - flowstats = mailbox->buf; - - spin_lock_bh(&priv->stats_lock); - if (tmp_counter_stats.counter_mode == 0) { priv->pf_stats.rx_bytes = be64_to_cpu(tmp_counter_stats.rx_bytes); priv->pf_stats.tx_bytes = be64_to_cpu(tmp_counter_stats.tx_bytes); @@ -410,6 +414,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) out: mlx4_free_cmd_mailbox(mdev->dev, mailbox); + mlx4_free_cmd_mailbox(mdev->dev, mailbox_priority); return err; } -- cgit From fccff0862838908d21eaf956d57e09c6c189f7c5 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Fri, 15 Dec 2017 08:44:21 +0100 Subject: mlxsw: spectrum: Disable MAC learning for ovs port Learning is currently enabled for ports which are OVS slaves - even though OVS doesn't need this indication. Since we're not associating a fid with the port, HW would continuously notify driver of learned [& aged] MACs which would be logged as errors. Fixes: 2b94e58df58c ("mlxsw: spectrum: Allow ports to work under OVS master") Signed-off-by: Yuval Mintz Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 2d0897b7d860..9bd8d28de152 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -4300,6 +4300,7 @@ static int mlxsw_sp_port_stp_set(struct mlxsw_sp_port *mlxsw_sp_port, static int mlxsw_sp_port_ovs_join(struct mlxsw_sp_port *mlxsw_sp_port) { + u16 vid = 1; int err; err = mlxsw_sp_port_vp_mode_set(mlxsw_sp_port, true); @@ -4312,8 +4313,19 @@ static int mlxsw_sp_port_ovs_join(struct mlxsw_sp_port *mlxsw_sp_port) true, false); if (err) goto err_port_vlan_set; + + for (; vid <= VLAN_N_VID - 1; vid++) { + err = mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, + vid, false); + if (err) + goto err_vid_learning_set; + } + return 0; +err_vid_learning_set: + for (vid--; vid >= 1; vid--) + mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, vid, true); err_port_vlan_set: mlxsw_sp_port_stp_set(mlxsw_sp_port, false); err_port_stp_set: @@ -4323,6 +4335,12 @@ err_port_stp_set: static void mlxsw_sp_port_ovs_leave(struct mlxsw_sp_port *mlxsw_sp_port) { + u16 vid; + + for (vid = VLAN_N_VID - 1; vid >= 1; vid--) + mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, + vid, true); + mlxsw_sp_port_vlan_set(mlxsw_sp_port, 2, VLAN_N_VID - 1, false, false); mlxsw_sp_port_stp_set(mlxsw_sp_port, false); -- cgit From e4d02ca04c6d48ab2226342a1c4ed54f1dbb72bd Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:40 +0300 Subject: net: aquantia: Fix actual speed capabilities reporting Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 4 +++- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 7 ++++--- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 5 +++-- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 13 ++++++++++++- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 13 ++++++++++++- 6 files changed, 35 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index 0207927dc8a6..4ebd53b3c7da 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -85,7 +85,9 @@ struct aq_hw_ops { void (*destroy)(struct aq_hw_s *self); int (*get_hw_caps)(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps); + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device); int (*hw_ring_tx_xmit)(struct aq_hw_s *self, struct aq_ring_s *aq_ring, unsigned int frags); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 78dfb2ab78ce..a360ccc298b9 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -222,7 +222,7 @@ static struct net_device *aq_nic_ndev_alloc(void) struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, const struct ethtool_ops *et_ops, - struct device *dev, + struct pci_dev *pdev, struct aq_pci_func_s *aq_pci_func, unsigned int port, const struct aq_hw_ops *aq_hw_ops) @@ -242,7 +242,7 @@ struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, ndev->netdev_ops = ndev_ops; ndev->ethtool_ops = et_ops; - SET_NETDEV_DEV(ndev, dev); + SET_NETDEV_DEV(ndev, &pdev->dev); ndev->if_port = port; self->ndev = ndev; @@ -254,7 +254,8 @@ struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, self->aq_hw = self->aq_hw_ops.create(aq_pci_func, self->port, &self->aq_hw_ops); - err = self->aq_hw_ops.get_hw_caps(self->aq_hw, &self->aq_hw_caps); + err = self->aq_hw_ops.get_hw_caps(self->aq_hw, &self->aq_hw_caps, + pdev->device, pdev->subsystem_device); if (err < 0) goto err_exit; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index 4309983acdd6..3c9f8db03d5f 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -71,7 +71,7 @@ struct aq_nic_cfg_s { struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, const struct ethtool_ops *et_ops, - struct device *dev, + struct pci_dev *pdev, struct aq_pci_func_s *aq_pci_func, unsigned int port, const struct aq_hw_ops *aq_hw_ops); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c index cadaa646c89f..58c29d04b186 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c @@ -51,7 +51,8 @@ struct aq_pci_func_s *aq_pci_func_alloc(struct aq_hw_ops *aq_hw_ops, pci_set_drvdata(pdev, self); self->pdev = pdev; - err = aq_hw_ops->get_hw_caps(NULL, &self->aq_hw_caps); + err = aq_hw_ops->get_hw_caps(NULL, &self->aq_hw_caps, pdev->device, + pdev->subsystem_device); if (err < 0) goto err_exit; @@ -59,7 +60,7 @@ struct aq_pci_func_s *aq_pci_func_alloc(struct aq_hw_ops *aq_hw_ops, for (port = 0; port < self->ports; ++port) { struct aq_nic_s *aq_nic = aq_nic_alloc_cold(ndev_ops, eth_ops, - &pdev->dev, self, + pdev, self, port, aq_hw_ops); if (!aq_nic) { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index 07b3c49a16a4..b0abd187cead 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -18,9 +18,20 @@ #include "hw_atl_a0_internal.h" static int hw_atl_a0_get_hw_caps(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps) + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device) { memcpy(aq_hw_caps, &hw_atl_a0_hw_caps_, sizeof(*aq_hw_caps)); + + if (device == HW_ATL_DEVICE_ID_D108 && subsystem_device == 0x0001) + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_10G; + + if (device == HW_ATL_DEVICE_ID_D109 && subsystem_device == 0x0001) { + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_10G; + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_5G; + } + return 0; } diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index ec68c20efcbd..e4e3b8e2d67e 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -18,9 +18,20 @@ #include "hw_atl_b0_internal.h" static int hw_atl_b0_get_hw_caps(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps) + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device) { memcpy(aq_hw_caps, &hw_atl_b0_hw_caps_, sizeof(*aq_hw_caps)); + + if (device == HW_ATL_DEVICE_ID_D108 && subsystem_device == 0x0001) + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_10G; + + if (device == HW_ATL_DEVICE_ID_D109 && subsystem_device == 0x0001) { + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_10G; + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_5G; + } + return 0; } -- cgit From 1e366161510f266516107a69db91f1f2edaea11c Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:41 +0300 Subject: net: aquantia: Fix hardware DMA stream overload on large MRRS Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by: Pavel Belous Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 12 ++++++++++++ .../ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h | 6 ++++++ 2 files changed, 18 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index e4e3b8e2d67e..36fddb199160 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -16,6 +16,7 @@ #include "hw_atl_utils.h" #include "hw_atl_llh.h" #include "hw_atl_b0_internal.h" +#include "hw_atl_llh_internal.h" static int hw_atl_b0_get_hw_caps(struct aq_hw_s *self, struct aq_hw_caps_s *aq_hw_caps, @@ -368,6 +369,7 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, }; int err = 0; + u32 val; self->aq_nic_cfg = aq_nic_cfg; @@ -385,6 +387,16 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, hw_atl_b0_hw_rss_set(self, &aq_nic_cfg->aq_rss); hw_atl_b0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss); + /* Force limit MRRS on RDM/TDM to 2K */ + val = aq_hw_read_reg(self, pci_reg_control6_adr); + aq_hw_write_reg(self, pci_reg_control6_adr, (val & ~0x707) | 0x404); + + /* TX DMA total request limit. B0 hardware is not capable to + * handle more than (8K-MRRS) incoming DMA data. + * Value 24 in 256byte units + */ + aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h index 5527fc0e5942..93450ec930e8 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h @@ -2343,6 +2343,9 @@ #define tx_dma_desc_base_addrmsw_adr(descriptor) \ (0x00007c04u + (descriptor) * 0x40) +/* tx dma total request limit */ +#define tx_dma_total_req_limit_adr 0x00007b20u + /* tx interrupt moderation control register definitions * Preprocessor definitions for TX Interrupt Moderation Control Register * Base Address: 0x00008980 @@ -2369,6 +2372,9 @@ /* default value of bitfield reg_res_dsbl */ #define pci_reg_res_dsbl_default 0x1 +/* PCI core control register */ +#define pci_reg_control6_adr 0x1014u + /* global microprocessor scratch pad definitions */ #define glb_cpu_scratch_scp_adr(scratch_scp) (0x00000300u + (scratch_scp) * 0x4) -- cgit From be08d839d9ef1c9b0e4ed809ec852ff100f9970d Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:42 +0300 Subject: net: aquantia: Extend stat counters to 64bit values Device hardware provides only 32bit counters. Using these directly causes byte counters to overflow soon. A separate nic level structure with 64 bit counters is now used to collect incrementally all the stats and report these counters to ethtool stats and ndev stats. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 25 ++++++- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 35 ++++++++-- .../aquantia/atlantic/hw_atl/hw_atl_utils.c | 80 +++++++--------------- .../aquantia/atlantic/hw_atl/hw_atl_utils.h | 6 +- 4 files changed, 79 insertions(+), 67 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index 4ebd53b3c7da..b3825de6cdfb 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -46,6 +46,28 @@ struct aq_hw_link_status_s { unsigned int mbps; }; +struct aq_stats_s { + u64 uprc; + u64 mprc; + u64 bprc; + u64 erpt; + u64 uptc; + u64 mptc; + u64 bptc; + u64 erpr; + u64 mbtc; + u64 bbtc; + u64 mbrc; + u64 bbrc; + u64 ubrc; + u64 ubtc; + u64 dpc; + u64 dma_pkt_rc; + u64 dma_pkt_tc; + u64 dma_oct_rc; + u64 dma_oct_tc; +}; + #define AQ_HW_IRQ_INVALID 0U #define AQ_HW_IRQ_LEGACY 1U #define AQ_HW_IRQ_MSI 2U @@ -166,8 +188,7 @@ struct aq_hw_ops { int (*hw_update_stats)(struct aq_hw_s *self); - int (*hw_get_hw_stats)(struct aq_hw_s *self, u64 *data, - unsigned int *p_count); + struct aq_stats_s *(*hw_get_hw_stats)(struct aq_hw_s *self); int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index a360ccc298b9..28cbe9d43df6 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -750,16 +750,40 @@ int aq_nic_get_regs_count(struct aq_nic_s *self) void aq_nic_get_stats(struct aq_nic_s *self, u64 *data) { - struct aq_vec_s *aq_vec = NULL; unsigned int i = 0U; unsigned int count = 0U; - int err = 0; + struct aq_vec_s *aq_vec = NULL; + struct aq_stats_s *stats = self->aq_hw_ops.hw_get_hw_stats(self->aq_hw); - err = self->aq_hw_ops.hw_get_hw_stats(self->aq_hw, data, &count); - if (err < 0) + if (!stats) goto err_exit; - data += count; + data[i] = stats->uprc + stats->mprc + stats->bprc; + data[++i] = stats->uprc; + data[++i] = stats->mprc; + data[++i] = stats->bprc; + data[++i] = stats->erpt; + data[++i] = stats->uptc + stats->mptc + stats->bptc; + data[++i] = stats->uptc; + data[++i] = stats->mptc; + data[++i] = stats->bptc; + data[++i] = stats->ubrc; + data[++i] = stats->ubtc; + data[++i] = stats->mbrc; + data[++i] = stats->mbtc; + data[++i] = stats->bbrc; + data[++i] = stats->bbtc; + data[++i] = stats->ubrc + stats->mbrc + stats->bbrc; + data[++i] = stats->ubtc + stats->mbtc + stats->bbtc; + data[++i] = stats->dma_pkt_rc; + data[++i] = stats->dma_pkt_tc; + data[++i] = stats->dma_oct_rc; + data[++i] = stats->dma_oct_tc; + data[++i] = stats->dpc; + + i++; + + data += i; count = 0U; for (i = 0U, aq_vec = self->aq_vec[0]; @@ -769,7 +793,6 @@ void aq_nic_get_stats(struct aq_nic_s *self, u64 *data) } err_exit:; - (void)err; } void aq_nic_get_link_ksettings(struct aq_nic_s *self, diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c index 1fe016fc4bc7..f2ce12ed4218 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c @@ -503,73 +503,43 @@ int hw_atl_utils_update_stats(struct aq_hw_s *self) struct hw_atl_s *hw_self = PHAL_ATLANTIC; struct hw_aq_atl_utils_mbox mbox; - if (!self->aq_link_status.mbps) - return 0; - hw_atl_utils_mpi_read_stats(self, &mbox); #define AQ_SDELTA(_N_) (hw_self->curr_stats._N_ += \ mbox.stats._N_ - hw_self->last_stats._N_) - - AQ_SDELTA(uprc); - AQ_SDELTA(mprc); - AQ_SDELTA(bprc); - AQ_SDELTA(erpt); - - AQ_SDELTA(uptc); - AQ_SDELTA(mptc); - AQ_SDELTA(bptc); - AQ_SDELTA(erpr); - - AQ_SDELTA(ubrc); - AQ_SDELTA(ubtc); - AQ_SDELTA(mbrc); - AQ_SDELTA(mbtc); - AQ_SDELTA(bbrc); - AQ_SDELTA(bbtc); - AQ_SDELTA(dpc); - + if (self->aq_link_status.mbps) { + AQ_SDELTA(uprc); + AQ_SDELTA(mprc); + AQ_SDELTA(bprc); + AQ_SDELTA(erpt); + + AQ_SDELTA(uptc); + AQ_SDELTA(mptc); + AQ_SDELTA(bptc); + AQ_SDELTA(erpr); + + AQ_SDELTA(ubrc); + AQ_SDELTA(ubtc); + AQ_SDELTA(mbrc); + AQ_SDELTA(mbtc); + AQ_SDELTA(bbrc); + AQ_SDELTA(bbtc); + AQ_SDELTA(dpc); + } #undef AQ_SDELTA + hw_self->curr_stats.dma_pkt_rc = stats_rx_dma_good_pkt_counterlsw_get(self); + hw_self->curr_stats.dma_pkt_tc = stats_tx_dma_good_pkt_counterlsw_get(self); + hw_self->curr_stats.dma_oct_rc = stats_rx_dma_good_octet_counterlsw_get(self); + hw_self->curr_stats.dma_oct_tc = stats_tx_dma_good_octet_counterlsw_get(self); memcpy(&hw_self->last_stats, &mbox.stats, sizeof(mbox.stats)); return 0; } -int hw_atl_utils_get_hw_stats(struct aq_hw_s *self, - u64 *data, unsigned int *p_count) +struct aq_stats_s *hw_atl_utils_get_hw_stats(struct aq_hw_s *self) { - struct hw_atl_s *hw_self = PHAL_ATLANTIC; - struct hw_atl_stats_s *stats = &hw_self->curr_stats; - int i = 0; - - data[i] = stats->uprc + stats->mprc + stats->bprc; - data[++i] = stats->uprc; - data[++i] = stats->mprc; - data[++i] = stats->bprc; - data[++i] = stats->erpt; - data[++i] = stats->uptc + stats->mptc + stats->bptc; - data[++i] = stats->uptc; - data[++i] = stats->mptc; - data[++i] = stats->bptc; - data[++i] = stats->ubrc; - data[++i] = stats->ubtc; - data[++i] = stats->mbrc; - data[++i] = stats->mbtc; - data[++i] = stats->bbrc; - data[++i] = stats->bbtc; - data[++i] = stats->ubrc + stats->mbrc + stats->bbrc; - data[++i] = stats->ubtc + stats->mbtc + stats->bbtc; - data[++i] = stats_rx_dma_good_pkt_counterlsw_get(self); - data[++i] = stats_tx_dma_good_pkt_counterlsw_get(self); - data[++i] = stats_rx_dma_good_octet_counterlsw_get(self); - data[++i] = stats_tx_dma_good_octet_counterlsw_get(self); - data[++i] = stats->dpc; - - if (p_count) - *p_count = ++i; - - return 0; + return &PHAL_ATLANTIC->curr_stats; } static const u32 hw_atl_utils_hw_mac_regs[] = { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h index c99cc690e425..21aeca6908d3 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h @@ -129,7 +129,7 @@ struct __packed hw_aq_atl_utils_mbox { struct __packed hw_atl_s { struct aq_hw_s base; struct hw_atl_stats_s last_stats; - struct hw_atl_stats_s curr_stats; + struct aq_stats_s curr_stats; u64 speed; unsigned int chip_features; u32 fw_ver_actual; @@ -207,8 +207,6 @@ int hw_atl_utils_get_fw_version(struct aq_hw_s *self, u32 *fw_version); int hw_atl_utils_update_stats(struct aq_hw_s *self); -int hw_atl_utils_get_hw_stats(struct aq_hw_s *self, - u64 *data, - unsigned int *p_count); +struct aq_stats_s *hw_atl_utils_get_hw_stats(struct aq_hw_s *self); #endif /* HW_ATL_UTILS_H */ -- cgit From 9f8a2203a542f5f3cdeb17f40250c49bb87aa7e3 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:43 +0300 Subject: net: aquantia: Fill ndev stat couters from hardware Originally they were filled from ring sw counters. These sometimes incorrectly calculate byte and packet amounts when using LRO/LSO and jumboframes. Filling ndev counters from hardware makes them precise. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 32 ++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 28cbe9d43df6..307caac68731 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -37,6 +37,8 @@ static unsigned int aq_itr_rx; module_param_named(aq_itr_rx, aq_itr_rx, uint, 0644); MODULE_PARM_DESC(aq_itr_rx, "RX interrupt throttle rate"); +static void aq_nic_update_ndev_stats(struct aq_nic_s *self); + static void aq_nic_rss_init(struct aq_nic_s *self, unsigned int num_rss_queues) { struct aq_nic_cfg_s *cfg = &self->aq_nic_cfg; @@ -166,11 +168,7 @@ static int aq_nic_update_link_status(struct aq_nic_s *self) static void aq_nic_service_timer_cb(struct timer_list *t) { struct aq_nic_s *self = from_timer(self, t, service_timer); - struct net_device *ndev = aq_nic_get_ndev(self); int err = 0; - unsigned int i = 0U; - struct aq_ring_stats_rx_s stats_rx; - struct aq_ring_stats_tx_s stats_tx; if (aq_utils_obj_test(&self->header.flags, AQ_NIC_FLAGS_IS_NOT_READY)) goto err_exit; @@ -182,19 +180,8 @@ static void aq_nic_service_timer_cb(struct timer_list *t) if (self->aq_hw_ops.hw_update_stats) self->aq_hw_ops.hw_update_stats(self->aq_hw); - memset(&stats_rx, 0U, sizeof(struct aq_ring_stats_rx_s)); - memset(&stats_tx, 0U, sizeof(struct aq_ring_stats_tx_s)); - for (i = AQ_DIMOF(self->aq_vec); i--;) { - if (self->aq_vec[i]) - aq_vec_add_stats(self->aq_vec[i], &stats_rx, &stats_tx); - } + aq_nic_update_ndev_stats(self); - ndev->stats.rx_packets = stats_rx.packets; - ndev->stats.rx_bytes = stats_rx.bytes; - ndev->stats.rx_errors = stats_rx.errors; - ndev->stats.tx_packets = stats_tx.packets; - ndev->stats.tx_bytes = stats_tx.bytes; - ndev->stats.tx_errors = stats_tx.errors; err_exit: mod_timer(&self->service_timer, @@ -795,6 +782,19 @@ void aq_nic_get_stats(struct aq_nic_s *self, u64 *data) err_exit:; } +static void aq_nic_update_ndev_stats(struct aq_nic_s *self) +{ + struct net_device *ndev = self->ndev; + struct aq_stats_s *stats = self->aq_hw_ops.hw_get_hw_stats(self->aq_hw); + + ndev->stats.rx_packets = stats->uprc + stats->mprc + stats->bprc; + ndev->stats.rx_bytes = stats->ubrc + stats->mbrc + stats->bbrc; + ndev->stats.rx_errors = stats->erpr; + ndev->stats.tx_packets = stats->uptc + stats->mptc + stats->bptc; + ndev->stats.tx_bytes = stats->ubtc + stats->mbtc + stats->bbtc; + ndev->stats.tx_errors = stats->erpt; +} + void aq_nic_get_link_ksettings(struct aq_nic_s *self, struct ethtool_link_ksettings *cmd) { -- cgit From 45cc1c7ad47c4d166d15c7bce449d2de4daef0c5 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:44 +0300 Subject: net: aquantia: Fill in multicast counter in ndev stats from hardware This metric comes from HW and is also diff-calculated, like other counters Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 307caac68731..b3a5d1fbc713 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -793,6 +793,7 @@ static void aq_nic_update_ndev_stats(struct aq_nic_s *self) ndev->stats.tx_packets = stats->uptc + stats->mptc + stats->bptc; ndev->stats.tx_bytes = stats->ubtc + stats->mbtc + stats->bbtc; ndev->stats.tx_errors = stats->erpt; + ndev->stats.multicast = stats->mprc; } void aq_nic_get_link_ksettings(struct aq_nic_s *self, -- cgit From fdb4a0830e74acfbe84d4d4e6772ea09c96786ad Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:45 +0300 Subject: net: aquantia: Improve link state and statistics check interval callback Reduce timeout from 2 secs to 1 sec. If link is down, reduce it to 500msec. This speeds up link detection. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_cfg.h | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h index 57e796870595..73b93a7b4800 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h @@ -50,7 +50,7 @@ #define AQ_CFG_PCI_FUNC_MSIX_IRQS 9U #define AQ_CFG_PCI_FUNC_PORTS 2U -#define AQ_CFG_SERVICE_TIMER_INTERVAL (2 * HZ) +#define AQ_CFG_SERVICE_TIMER_INTERVAL (1 * HZ) #define AQ_CFG_POLLING_TIMER_INTERVAL ((unsigned int)(2 * HZ)) #define AQ_CFG_SKB_FRAGS_MAX 32U diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index b3a5d1fbc713..75a894a9251c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -168,6 +168,7 @@ static int aq_nic_update_link_status(struct aq_nic_s *self) static void aq_nic_service_timer_cb(struct timer_list *t) { struct aq_nic_s *self = from_timer(self, t, service_timer); + int ctimer = AQ_CFG_SERVICE_TIMER_INTERVAL; int err = 0; if (aq_utils_obj_test(&self->header.flags, AQ_NIC_FLAGS_IS_NOT_READY)) @@ -182,10 +183,12 @@ static void aq_nic_service_timer_cb(struct timer_list *t) aq_nic_update_ndev_stats(self); + /* If no link - use faster timer rate to detect link up asap */ + if (!netif_carrier_ok(self->ndev)) + ctimer = max(ctimer / 2, 1); err_exit: - mod_timer(&self->service_timer, - jiffies + AQ_CFG_SERVICE_TIMER_INTERVAL); + mod_timer(&self->service_timer, jiffies + ctimer); } static void aq_nic_polling_timer_cb(struct timer_list *t) -- cgit From f3e2778429c2ad8555e888858e0f0e98c86c4b0f Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:46 +0300 Subject: net: aquantia: Update hw counters on hw init On very first start we should read out current HW counter values to make diff based calculations later. This also should be done each time NIC gets down/up or wakes up after sleep state. We reset link state explicitly to prevent diffs from being summed this first time. Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 4 ++++ drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index b0abd187cead..f18dce14c93c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -344,6 +344,10 @@ static int hw_atl_a0_hw_init(struct aq_hw_s *self, hw_atl_a0_hw_rss_set(self, &aq_nic_cfg->aq_rss); hw_atl_a0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss); + /* Reset link status and read out initial hardware counters */ + self->aq_link_status.mbps = 0; + hw_atl_utils_update_stats(self); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 36fddb199160..e4a22ce7bf09 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -397,6 +397,10 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, */ aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24); + /* Reset link status and read out initial hardware counters */ + self->aq_link_status.mbps = 0; + hw_atl_utils_update_stats(self); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; -- cgit From 98bc036de40489416d61ab175bb417c094e7783c Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:47 +0300 Subject: net: aquantia: Fix typo in ethtool statistics names Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c index 70efb7467bf3..f2d8063a2cef 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c @@ -66,14 +66,14 @@ static const char aq_ethtool_stat_names[][ETH_GSTRING_LEN] = { "OutUCast", "OutMCast", "OutBCast", - "InUCastOctects", - "OutUCastOctects", - "InMCastOctects", - "OutMCastOctects", - "InBCastOctects", - "OutBCastOctects", - "InOctects", - "OutOctects", + "InUCastOctets", + "OutUCastOctets", + "InMCastOctets", + "OutMCastOctets", + "InBCastOctets", + "OutBCastOctets", + "InOctets", + "OutOctets", "InPacketsDma", "OutPacketsDma", "InOctetsDma", -- cgit From d4c242d4ba5730b62579969804cd8fcf58b9c84f Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 14 Dec 2017 12:34:48 +0300 Subject: net: aquantia: Increment driver version Add a suffix to distinguish kernel mainline version and aquantia releases Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_cfg.h | 3 ++- drivers/net/ethernet/aquantia/atlantic/ver.h | 6 ++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h index 73b93a7b4800..105fdb958cef 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h @@ -80,6 +80,7 @@ #define AQ_CFG_DRV_VERSION __stringify(NIC_MAJOR_DRIVER_VERSION)"."\ __stringify(NIC_MINOR_DRIVER_VERSION)"."\ __stringify(NIC_BUILD_DRIVER_VERSION)"."\ - __stringify(NIC_REVISION_DRIVER_VERSION) + __stringify(NIC_REVISION_DRIVER_VERSION) \ + AQ_CFG_DRV_VERSION_SUFFIX #endif /* AQ_CFG_H */ diff --git a/drivers/net/ethernet/aquantia/atlantic/ver.h b/drivers/net/ethernet/aquantia/atlantic/ver.h index 0de858d215c2..9009f2651e70 100644 --- a/drivers/net/ethernet/aquantia/atlantic/ver.h +++ b/drivers/net/ethernet/aquantia/atlantic/ver.h @@ -11,8 +11,10 @@ #define VER_H #define NIC_MAJOR_DRIVER_VERSION 1 -#define NIC_MINOR_DRIVER_VERSION 5 -#define NIC_BUILD_DRIVER_VERSION 345 +#define NIC_MINOR_DRIVER_VERSION 6 +#define NIC_BUILD_DRIVER_VERSION 13 #define NIC_REVISION_DRIVER_VERSION 0 +#define AQ_CFG_DRV_VERSION_SUFFIX "-kern" + #endif /* VER_H */ -- cgit From 043ee1debd0b29c16c4c4b11a348ca667bfe9144 Mon Sep 17 00:00:00 2001 From: Hemanth Puranik Date: Fri, 15 Dec 2017 20:05:58 +0530 Subject: net: qcom/emac: Reduce timeout for mdio read/write Currently mdio read/write takes around ~115us as the timeout between status check is set to 100us. By reducing the timeout to 1us mdio read/write takes ~15us to complete. This improves the link up event response. Signed-off-by: Hemanth Puranik Acked-by: Timur Tabi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c index 18461fcb9815..53dbf1e163a8 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c @@ -47,6 +47,7 @@ #define MDIO_CLK_25_28 7 #define MDIO_WAIT_TIMES 1000 +#define MDIO_STATUS_DELAY_TIME 1 static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) { @@ -65,7 +66,7 @@ static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, !(reg & (MDIO_START | MDIO_BUSY)), - 100, MDIO_WAIT_TIMES * 100)) + MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100)) return -EIO; return (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; @@ -88,8 +89,8 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) writel(reg, adpt->base + EMAC_MDIO_CTRL); if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, - !(reg & (MDIO_START | MDIO_BUSY)), 100, - MDIO_WAIT_TIMES * 100)) + !(reg & (MDIO_START | MDIO_BUSY)), + MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100)) return -EIO; return 0; -- cgit From ac3241d5c81bf6e85095481435f29a4627ff820e Mon Sep 17 00:00:00 2001 From: Hemanth Puranik Date: Mon, 18 Dec 2017 11:27:47 +0530 Subject: net: qcom/emac: Change the order of mac up and sgmii open This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik Acked-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 70c92b649b29..38c924bdd32e 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -253,18 +253,18 @@ static int emac_open(struct net_device *netdev) return ret; } - ret = emac_mac_up(adpt); + ret = adpt->phy.open(adpt); if (ret) { emac_mac_rx_tx_rings_free_all(adpt); free_irq(irq->irq, irq); return ret; } - ret = adpt->phy.open(adpt); + ret = emac_mac_up(adpt); if (ret) { - emac_mac_down(adpt); emac_mac_rx_tx_rings_free_all(adpt); free_irq(irq->irq, irq); + adpt->phy.close(adpt); return ret; } -- cgit From 748a240c589824e9121befb1cba5341c319885bc Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 15 Dec 2017 15:21:50 -0600 Subject: tg3: Fix rx hang on MTU change with 5717/5719 This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index de51c2177d03..d09c5a9c53b5 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14225,7 +14225,9 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) /* Reset PHY, otherwise the read DMA engine will be in a mode that * breaks all requests to 256 bytes. */ - if (tg3_asic_rev(tp) == ASIC_REV_57766) + if (tg3_asic_rev(tp) == ASIC_REV_57766 || + tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719) reset_phy = true; err = tg3_restart_hw(tp, reset_phy); -- cgit From 8ba6b30ef700e16f3bc668e6f4f8375da9229e4d Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Sun, 17 Dec 2017 17:16:43 +0100 Subject: mlxsw: spectrum_router: Remove batch neighbour deletion causing FW bug This reverts commit 63dd00fa3e524c27cc0509190084ab147ecc8ae2. RAUHT DELETE_ALL seems to trigger a bug in FW. That manifests by later calls to RAUHT ADD of an IPv6 neighbor to fail with "bad parameter" error code. Signed-off-by: Petr Machata Fixes: 63dd00fa3e52 ("mlxsw: spectrum_router: Add batch neighbour deletion") Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 72ef4f8025f0..be657b8533f0 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -2436,25 +2436,16 @@ static void mlxsw_sp_neigh_fini(struct mlxsw_sp *mlxsw_sp) rhashtable_destroy(&mlxsw_sp->router->neigh_ht); } -static int mlxsw_sp_neigh_rif_flush(struct mlxsw_sp *mlxsw_sp, - const struct mlxsw_sp_rif *rif) -{ - char rauht_pl[MLXSW_REG_RAUHT_LEN]; - - mlxsw_reg_rauht_pack(rauht_pl, MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL, - rif->rif_index, rif->addr); - return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl); -} - static void mlxsw_sp_neigh_rif_gone_sync(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_rif *rif) { struct mlxsw_sp_neigh_entry *neigh_entry, *tmp; - mlxsw_sp_neigh_rif_flush(mlxsw_sp, rif); list_for_each_entry_safe(neigh_entry, tmp, &rif->neigh_list, - rif_list_node) + rif_list_node) { + mlxsw_sp_neigh_entry_update(mlxsw_sp, neigh_entry, false); mlxsw_sp_neigh_entry_destroy(mlxsw_sp, neigh_entry); + } } enum mlxsw_sp_nexthop_type { -- cgit From 7352e252b5bf40d59342494a70354a2d436fd0cd Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 18 Dec 2017 17:00:17 +0800 Subject: net: mediatek: setup proper state for disabled GMAC on the default The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 54adfd967858..fc67e35b253e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1961,11 +1961,12 @@ static int mtk_hw_init(struct mtk_eth *eth) /* set GE2 TUNE */ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0); - /* GE1, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0)); - - /* GE2, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1)); + /* Set linkdown as the default for each GMAC. Its own MCR would be set + * up with the more appropriate value when mtk_phy_link_adjust call is + * being invoked. + */ + for (i = 0; i < MTK_MAC_COUNT; i++) + mtk_w32(eth, 0, MTK_MAC_MCR(i)); /* Indicates CDM to parse the MTK special tag from CPU * which also is working out for untag packets. -- cgit From e688822d035b494071ecbadcccbd6f3325fb0f59 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Fri, 15 Dec 2017 20:20:06 +0300 Subject: net: arc_emac: fix arc_emac_rx() error paths arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 53 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 22 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 3241af1ce718..5b422be56165 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -210,39 +210,48 @@ static int arc_emac_rx(struct net_device *ndev, int budget) continue; } - pktlen = info & LEN_MASK; - stats->rx_packets++; - stats->rx_bytes += pktlen; - skb = rx_buff->skb; - skb_put(skb, pktlen); - skb->dev = ndev; - skb->protocol = eth_type_trans(skb, ndev); - - dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), - dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); - - /* Prepare the BD for next cycle */ - rx_buff->skb = netdev_alloc_skb_ip_align(ndev, - EMAC_BUFFER_SIZE); - if (unlikely(!rx_buff->skb)) { + /* Prepare the BD for next cycle. netif_receive_skb() + * only if new skb was allocated and mapped to avoid holes + * in the RX fifo. + */ + skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); + if (unlikely(!skb)) { + if (net_ratelimit()) + netdev_err(ndev, "cannot allocate skb\n"); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; - /* Because receive_skb is below, increment rx_dropped */ stats->rx_dropped++; continue; } - /* receive_skb only if new skb was allocated to avoid holes */ - netif_receive_skb(skb); - - addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, + addr = dma_map_single(&ndev->dev, (void *)skb->data, EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, addr)) { if (net_ratelimit()) - netdev_err(ndev, "cannot dma map\n"); - dev_kfree_skb(rx_buff->skb); + netdev_err(ndev, "cannot map dma buffer\n"); + dev_kfree_skb(skb); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; + stats->rx_dropped++; continue; } + + /* unmap previosly mapped skb */ + dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), + dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); + + pktlen = info & LEN_MASK; + stats->rx_packets++; + stats->rx_bytes += pktlen; + skb_put(rx_buff->skb, pktlen); + rx_buff->skb->dev = ndev; + rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); + + netif_receive_skb(rx_buff->skb); + + rx_buff->skb = skb; dma_unmap_addr_set(rx_buff, addr, addr); dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); -- cgit From 78aa09754d69ba19a55c59f490788ec1c85f41f0 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Tue, 19 Dec 2017 14:03:57 +0300 Subject: net: arc_emac: restart stalled EMAC Under certain conditions EMAC stop reception of incoming packets and continuously increment R_MISS register instead of saving data into provided buffer. The commit implement workaround for such situation. Then the stall detected EMAC will be restarted. On device the stall looks like the device lost it's dynamic IP address. ifconfig shows that interface error counter rapidly increments. At the same time on the DHCP server we can see continues DHCP-requests from device. In real network stalls happen really rarely. To make them frequent the broadcast storm[1] should be simulated. For simulation it is necessary to make following connections: 1. connect radxarock to 1st port of switch 2. connect some PC to 2nd port of switch 3. connect two other free ports together using standard ethernet cable, in order to make a switching loop. After that, is necessary to make a broadcast storm. For example, running on PC 'ping' to some IP address triggers ARP-request storm. After some time (~10sec), EMAC on rk3188 will stall. Observed and tested on rk3188 radxarock. [1] https://en.wikipedia.org/wiki/Broadcast_radiation Signed-off-by: Alexander Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac.h | 2 + drivers/net/ethernet/arc/emac_main.c | 111 +++++++++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h index 3c63b16d485f..d9efbc8d783b 100644 --- a/drivers/net/ethernet/arc/emac.h +++ b/drivers/net/ethernet/arc/emac.h @@ -159,6 +159,8 @@ struct arc_emac_priv { unsigned int link; unsigned int duplex; unsigned int speed; + + unsigned int rx_missed_errors; }; /** diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 5b422be56165..bd277b0dc615 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -26,6 +26,8 @@ #include "emac.h" +static void arc_emac_restart(struct net_device *ndev); + /** * arc_emac_tx_avail - Return the number of available slots in the tx ring. * @priv: Pointer to ARC EMAC private data structure. @@ -267,6 +269,53 @@ static int arc_emac_rx(struct net_device *ndev, int budget) return work_done; } +/** + * arc_emac_rx_miss_handle - handle R_MISS register + * @ndev: Pointer to the net_device structure. + */ +static void arc_emac_rx_miss_handle(struct net_device *ndev) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + unsigned int miss; + + miss = arc_reg_get(priv, R_MISS); + if (miss) { + stats->rx_errors += miss; + stats->rx_missed_errors += miss; + priv->rx_missed_errors += miss; + } +} + +/** + * arc_emac_rx_stall_check - check RX stall + * @ndev: Pointer to the net_device structure. + * @budget: How many BDs requested to process on 1 call. + * @work_done: How many BDs processed + * + * Under certain conditions EMAC stop reception of incoming packets and + * continuously increment R_MISS register instead of saving data into + * provided buffer. This function detect that condition and restart + * EMAC. + */ +static void arc_emac_rx_stall_check(struct net_device *ndev, + int budget, unsigned int work_done) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + struct arc_emac_bd *rxbd; + + if (work_done) + priv->rx_missed_errors = 0; + + if (priv->rx_missed_errors && budget) { + rxbd = &priv->rxbd[priv->last_rx_bd]; + if (le32_to_cpu(rxbd->info) & FOR_EMAC) { + arc_emac_restart(ndev); + priv->rx_missed_errors = 0; + } + } +} + /** * arc_emac_poll - NAPI poll handler. * @napi: Pointer to napi_struct structure. @@ -281,6 +330,7 @@ static int arc_emac_poll(struct napi_struct *napi, int budget) unsigned int work_done; arc_emac_tx_clean(ndev); + arc_emac_rx_miss_handle(ndev); work_done = arc_emac_rx(ndev, budget); if (work_done < budget) { @@ -288,6 +338,8 @@ static int arc_emac_poll(struct napi_struct *napi, int budget) arc_reg_or(priv, R_ENABLE, RXINT_MASK | TXINT_MASK); } + arc_emac_rx_stall_check(ndev, budget, work_done); + return work_done; } @@ -329,6 +381,8 @@ static irqreturn_t arc_emac_intr(int irq, void *dev_instance) if (status & MSER_MASK) { stats->rx_missed_errors += 0x100; stats->rx_errors += 0x100; + priv->rx_missed_errors += 0x100; + napi_schedule(&priv->napi); } if (status & RXCR_MASK) { @@ -741,6 +795,63 @@ static int arc_emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } +/** + * arc_emac_restart - Restart EMAC + * @ndev: Pointer to net_device structure. + * + * This function do hardware reset of EMAC in order to restore + * network packets reception. + */ +static void arc_emac_restart(struct net_device *ndev) +{ + struct arc_emac_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + int i; + + if (net_ratelimit()) + netdev_warn(ndev, "restarting stalled EMAC\n"); + + netif_stop_queue(ndev); + + /* Disable interrupts */ + arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); + + /* Disable EMAC */ + arc_reg_clr(priv, R_CTRL, EN_MASK); + + /* Return the sk_buff to system */ + arc_free_tx_queue(ndev); + + /* Clean Tx BD's */ + priv->txbd_curr = 0; + priv->txbd_dirty = 0; + memset(priv->txbd, 0, TX_RING_SZ); + + for (i = 0; i < RX_BD_NUM; i++) { + struct arc_emac_bd *rxbd = &priv->rxbd[i]; + unsigned int info = le32_to_cpu(rxbd->info); + + if (!(info & FOR_EMAC)) { + stats->rx_errors++; + stats->rx_dropped++; + } + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); + } + priv->last_rx_bd = 0; + + /* Make sure info is visible to EMAC before enable */ + wmb(); + + /* Enable interrupts */ + arc_reg_set(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); + + /* Enable EMAC */ + arc_reg_or(priv, R_CTRL, EN_MASK); + + netif_start_queue(ndev); +} + static const struct net_device_ops arc_emac_netdev_ops = { .ndo_open = arc_emac_open, .ndo_stop = arc_emac_stop, -- cgit From 200922c93f008e03ddc804c6dacdf26ca1ba86d7 Mon Sep 17 00:00:00 2001 From: Fredrik Hallenberg Date: Mon, 18 Dec 2017 23:33:59 +0100 Subject: net: stmmac: Fix TX timestamp calculation When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value. Signed-off-by: Fredrik Hallenberg Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c index 721b61655261..08c19ebd5306 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -34,6 +34,7 @@ static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr, { u32 value = readl(ioaddr + PTP_TCR); unsigned long data; + u32 reg_value; /* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second * formula = (1/ptp_clock) * 1000000000 @@ -50,10 +51,11 @@ static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr, data &= PTP_SSIR_SSINC_MASK; + reg_value = data; if (gmac4) - data = data << GMAC4_PTP_SSIR_SSINC_SHIFT; + reg_value <<= GMAC4_PTP_SSIR_SSINC_SHIFT; - writel(data, ioaddr + PTP_SSIR); + writel(reg_value, ioaddr + PTP_SSIR); return data; } -- cgit From a1762456993893795030d911106a7650481db0ef Mon Sep 17 00:00:00 2001 From: Fredrik Hallenberg Date: Mon, 18 Dec 2017 23:34:00 +0100 Subject: net: stmmac: Fix bad RX timestamp extraction As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by: Fredrik Hallenberg Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 5 +++-- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 3 ++- drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 5 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e1e5ac053760..ce2ea2d491ac 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -409,7 +409,7 @@ struct stmmac_desc_ops { /* get timestamp value */ u64(*get_timestamp) (void *desc, u32 ats); /* get rx timestamp status */ - int (*get_rx_timestamp_status) (void *desc, u32 ats); + int (*get_rx_timestamp_status)(void *desc, void *next_desc, u32 ats); /* Display ring */ void (*display_ring)(void *head, unsigned int size, bool rx); /* set MSS via context descriptor */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c index 4b286e27c4ca..7e089bf906b4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c @@ -258,7 +258,8 @@ static int dwmac4_rx_check_timestamp(void *desc) return ret; } -static int dwmac4_wrback_get_rx_timestamp_status(void *desc, u32 ats) +static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc, + u32 ats) { struct dma_desc *p = (struct dma_desc *)desc; int ret = -EINVAL; @@ -270,7 +271,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, u32 ats) /* Check if timestamp is OK from context descriptor */ do { - ret = dwmac4_rx_check_timestamp(desc); + ret = dwmac4_rx_check_timestamp(next_desc); if (ret < 0) goto exit; i++; diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 7546b3664113..2a828a312814 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -400,7 +400,8 @@ static u64 enh_desc_get_timestamp(void *desc, u32 ats) return ns; } -static int enh_desc_get_rx_timestamp_status(void *desc, u32 ats) +static int enh_desc_get_rx_timestamp_status(void *desc, void *next_desc, + u32 ats) { if (ats) { struct dma_extended_desc *p = (struct dma_extended_desc *)desc; diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c index f817f8f36569..db4cee57bb24 100644 --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c @@ -265,7 +265,7 @@ static u64 ndesc_get_timestamp(void *desc, u32 ats) return ns; } -static int ndesc_get_rx_timestamp_status(void *desc, u32 ats) +static int ndesc_get_rx_timestamp_status(void *desc, void *next_desc, u32 ats) { struct dma_desc *p = (struct dma_desc *)desc; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index d7250539d0bd..337d53d12e94 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -482,7 +482,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p, desc = np; /* Check if timestamp is available */ - if (priv->hw->desc->get_rx_timestamp_status(desc, priv->adv_ts)) { + if (priv->hw->desc->get_rx_timestamp_status(p, np, priv->adv_ts)) { ns = priv->hw->desc->get_timestamp(desc, priv->adv_ts); netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns); shhwtstamp = skb_hwtstamps(skb); -- cgit From bae115a2bb479142605726e6aa130f43f50e801a Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 29 Oct 2017 04:03:37 +0200 Subject: net/mlx5: FPGA, return -EINVAL if size is zero Currently, if a size of zero is passed to mlx5_fpga_mem_{read|write}_i2c() the "err" return value will not be initialized, which triggers gcc warnings: [..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error: uninitialized symbol 'err'. [..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error: uninitialized symbol 'err'. fix that. Fixes: a9956d35d199 ('net/mlx5: FPGA, Add SBU infrastructure') Signed-off-by: Kamal Heib Reviewed-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c index 3c11d6e2160a..14962969c5ba 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.c @@ -66,6 +66,9 @@ static int mlx5_fpga_mem_read_i2c(struct mlx5_fpga_device *fdev, size_t size, u8 actual_size; int err; + if (!size) + return -EINVAL; + if (!fdev->mdev) return -ENOTCONN; @@ -95,6 +98,9 @@ static int mlx5_fpga_mem_write_i2c(struct mlx5_fpga_device *fdev, size_t size, u8 actual_size; int err; + if (!size) + return -EINVAL; + if (!fdev->mdev) return -ENOTCONN; -- cgit From 231243c82793428467524227ae02ca451e6a98e7 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 10 Nov 2017 15:59:52 +0900 Subject: Revert "mlx5: move affinity hints assignments to generic code" Before the offending commit, mlx5 core did the IRQ affinity itself, and it seems that the new generic code have some drawbacks and one of them is the lack for user ability to modify irq affinity after the initial affinity values got assigned. The issue is still being discussed and a solution in the new generic code is required, until then we need to revert this patch. This fixes the following issue: echo > /proc/irq//smp_affinity fails with -EIO This reverts commit a435393acafbf0ecff4deb3e3cb554b34f0d0664. Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since it is used in mlx5_ib driver. Fixes: a435393acafb ("mlx5: move affinity hints assignments to generic code") Cc: Sagi Grimberg Cc: Thomas Gleixner Cc: Jes Sorensen Reported-by: Jes Sorensen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 45 +++++++------- drivers/net/ethernet/mellanox/mlx5/core/main.c | 75 +++++++++++++++++++++-- 3 files changed, 92 insertions(+), 29 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index c0872b3284cb..43f9054830e5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -590,6 +590,7 @@ struct mlx5e_channel { struct mlx5_core_dev *mdev; struct hwtstamp_config *tstamp; int ix; + int cpu; }; struct mlx5e_channels { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index d2b057a3e512..cbec66bc82f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -71,11 +71,6 @@ struct mlx5e_channel_param { struct mlx5e_cq_param icosq_cq; }; -static int mlx5e_get_node(struct mlx5e_priv *priv, int ix) -{ - return pci_irq_get_node(priv->mdev->pdev, MLX5_EQ_VEC_COMP_BASE + ix); -} - static bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev) { return MLX5_CAP_GEN(mdev, striding_rq) && @@ -444,17 +439,16 @@ static int mlx5e_rq_alloc_mpwqe_info(struct mlx5e_rq *rq, int wq_sz = mlx5_wq_ll_get_size(&rq->wq); int mtt_sz = mlx5e_get_wqe_mtt_sz(); int mtt_alloc = mtt_sz + MLX5_UMR_ALIGN - 1; - int node = mlx5e_get_node(c->priv, c->ix); int i; rq->mpwqe.info = kzalloc_node(wq_sz * sizeof(*rq->mpwqe.info), - GFP_KERNEL, node); + GFP_KERNEL, cpu_to_node(c->cpu)); if (!rq->mpwqe.info) goto err_out; /* We allocate more than mtt_sz as we will align the pointer */ - rq->mpwqe.mtt_no_align = kzalloc_node(mtt_alloc * wq_sz, - GFP_KERNEL, node); + rq->mpwqe.mtt_no_align = kzalloc_node(mtt_alloc * wq_sz, GFP_KERNEL, + cpu_to_node(c->cpu)); if (unlikely(!rq->mpwqe.mtt_no_align)) goto err_free_wqe_info; @@ -562,7 +556,7 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c, int err; int i; - rqp->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + rqp->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_ll_create(mdev, &rqp->wq, rqc_wq, &rq->wq, &rq->wq_ctrl); @@ -629,8 +623,7 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c, default: /* MLX5_WQ_TYPE_LINKED_LIST */ rq->wqe.frag_info = kzalloc_node(wq_sz * sizeof(*rq->wqe.frag_info), - GFP_KERNEL, - mlx5e_get_node(c->priv, c->ix)); + GFP_KERNEL, cpu_to_node(c->cpu)); if (!rq->wqe.frag_info) { err = -ENOMEM; goto err_rq_wq_destroy; @@ -1000,13 +993,13 @@ static int mlx5e_alloc_xdpsq(struct mlx5e_channel *c, sq->uar_map = mdev->mlx5e_res.bfreg.map; sq->min_inline_mode = params->tx_min_inline_mode; - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, &sq->wq, &sq->wq_ctrl); if (err) return err; sq->wq.db = &sq->wq.db[MLX5_SND_DBR]; - err = mlx5e_alloc_xdpsq_db(sq, mlx5e_get_node(c->priv, c->ix)); + err = mlx5e_alloc_xdpsq_db(sq, cpu_to_node(c->cpu)); if (err) goto err_sq_wq_destroy; @@ -1053,13 +1046,13 @@ static int mlx5e_alloc_icosq(struct mlx5e_channel *c, sq->channel = c; sq->uar_map = mdev->mlx5e_res.bfreg.map; - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, &sq->wq, &sq->wq_ctrl); if (err) return err; sq->wq.db = &sq->wq.db[MLX5_SND_DBR]; - err = mlx5e_alloc_icosq_db(sq, mlx5e_get_node(c->priv, c->ix)); + err = mlx5e_alloc_icosq_db(sq, cpu_to_node(c->cpu)); if (err) goto err_sq_wq_destroy; @@ -1126,13 +1119,13 @@ static int mlx5e_alloc_txqsq(struct mlx5e_channel *c, if (MLX5_IPSEC_DEV(c->priv->mdev)) set_bit(MLX5E_SQ_STATE_IPSEC, &sq->state); - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, &sq->wq, &sq->wq_ctrl); if (err) return err; sq->wq.db = &sq->wq.db[MLX5_SND_DBR]; - err = mlx5e_alloc_txqsq_db(sq, mlx5e_get_node(c->priv, c->ix)); + err = mlx5e_alloc_txqsq_db(sq, cpu_to_node(c->cpu)); if (err) goto err_sq_wq_destroy; @@ -1504,8 +1497,8 @@ static int mlx5e_alloc_cq(struct mlx5e_channel *c, struct mlx5_core_dev *mdev = c->priv->mdev; int err; - param->wq.buf_numa_node = mlx5e_get_node(c->priv, c->ix); - param->wq.db_numa_node = mlx5e_get_node(c->priv, c->ix); + param->wq.buf_numa_node = cpu_to_node(c->cpu); + param->wq.db_numa_node = cpu_to_node(c->cpu); param->eq_ix = c->ix; err = mlx5e_alloc_cq_common(mdev, param, cq); @@ -1604,6 +1597,11 @@ static void mlx5e_close_cq(struct mlx5e_cq *cq) mlx5e_free_cq(cq); } +static int mlx5e_get_cpu(struct mlx5e_priv *priv, int ix) +{ + return cpumask_first(priv->mdev->priv.irq_info[ix].mask); +} + static int mlx5e_open_tx_cqs(struct mlx5e_channel *c, struct mlx5e_params *params, struct mlx5e_channel_param *cparam) @@ -1752,12 +1750,13 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, { struct mlx5e_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; + int cpu = mlx5e_get_cpu(priv, ix); struct mlx5e_channel *c; unsigned int irq; int err; int eqn; - c = kzalloc_node(sizeof(*c), GFP_KERNEL, mlx5e_get_node(priv, ix)); + c = kzalloc_node(sizeof(*c), GFP_KERNEL, cpu_to_node(cpu)); if (!c) return -ENOMEM; @@ -1765,6 +1764,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, c->mdev = priv->mdev; c->tstamp = &priv->tstamp; c->ix = ix; + c->cpu = cpu; c->pdev = &priv->mdev->pdev->dev; c->netdev = priv->netdev; c->mkey_be = cpu_to_be32(priv->mdev->mlx5e_res.mkey.key); @@ -1853,8 +1853,7 @@ static void mlx5e_activate_channel(struct mlx5e_channel *c) for (tc = 0; tc < c->num_tc; tc++) mlx5e_activate_txqsq(&c->sq[tc]); mlx5e_activate_rq(&c->rq); - netif_set_xps_queue(c->netdev, - mlx5_get_vector_affinity(c->priv->mdev, c->ix), c->ix); + netif_set_xps_queue(c->netdev, get_cpu_mask(c->cpu), c->ix); } static void mlx5e_deactivate_channel(struct mlx5e_channel *c) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 5f323442cc5a..8a89c7e8cd63 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -317,9 +317,6 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) { struct mlx5_priv *priv = &dev->priv; struct mlx5_eq_table *table = &priv->eq_table; - struct irq_affinity irqdesc = { - .pre_vectors = MLX5_EQ_VEC_COMP_BASE, - }; int num_eqs = 1 << MLX5_CAP_GEN(dev, log_max_eq); int nvec; @@ -333,10 +330,9 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) if (!priv->irq_info) goto err_free_msix; - nvec = pci_alloc_irq_vectors_affinity(dev->pdev, + nvec = pci_alloc_irq_vectors(dev->pdev, MLX5_EQ_VEC_COMP_BASE + 1, nvec, - PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, - &irqdesc); + PCI_IRQ_MSIX); if (nvec < 0) return nvec; @@ -622,6 +618,63 @@ u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev) return (u64)timer_l | (u64)timer_h1 << 32; } +static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i) +{ + struct mlx5_priv *priv = &mdev->priv; + int irq = pci_irq_vector(mdev->pdev, MLX5_EQ_VEC_COMP_BASE + i); + + if (!zalloc_cpumask_var(&priv->irq_info[i].mask, GFP_KERNEL)) { + mlx5_core_warn(mdev, "zalloc_cpumask_var failed"); + return -ENOMEM; + } + + cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node), + priv->irq_info[i].mask); + + if (IS_ENABLED(CONFIG_SMP) && + irq_set_affinity_hint(irq, priv->irq_info[i].mask)) + mlx5_core_warn(mdev, "irq_set_affinity_hint failed, irq 0x%.4x", irq); + + return 0; +} + +static void mlx5_irq_clear_affinity_hint(struct mlx5_core_dev *mdev, int i) +{ + struct mlx5_priv *priv = &mdev->priv; + int irq = pci_irq_vector(mdev->pdev, MLX5_EQ_VEC_COMP_BASE + i); + + irq_set_affinity_hint(irq, NULL); + free_cpumask_var(priv->irq_info[i].mask); +} + +static int mlx5_irq_set_affinity_hints(struct mlx5_core_dev *mdev) +{ + int err; + int i; + + for (i = 0; i < mdev->priv.eq_table.num_comp_vectors; i++) { + err = mlx5_irq_set_affinity_hint(mdev, i); + if (err) + goto err_out; + } + + return 0; + +err_out: + for (i--; i >= 0; i--) + mlx5_irq_clear_affinity_hint(mdev, i); + + return err; +} + +static void mlx5_irq_clear_affinity_hints(struct mlx5_core_dev *mdev) +{ + int i; + + for (i = 0; i < mdev->priv.eq_table.num_comp_vectors; i++) + mlx5_irq_clear_affinity_hint(mdev, i); +} + int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn, unsigned int *irqn) { @@ -1097,6 +1150,12 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, goto err_stop_eqs; } + err = mlx5_irq_set_affinity_hints(dev); + if (err) { + dev_err(&pdev->dev, "Failed to alloc affinity hint cpumask\n"); + goto err_affinity_hints; + } + err = mlx5_init_fs(dev); if (err) { dev_err(&pdev->dev, "Failed to init flow steering\n"); @@ -1154,6 +1213,9 @@ err_sriov: mlx5_cleanup_fs(dev); err_fs: + mlx5_irq_clear_affinity_hints(dev); + +err_affinity_hints: free_comp_eqs(dev); err_stop_eqs: @@ -1222,6 +1284,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, mlx5_sriov_detach(dev); mlx5_cleanup_fs(dev); + mlx5_irq_clear_affinity_hints(dev); free_comp_eqs(dev); mlx5_stop_eqs(dev); mlx5_put_uars_page(dev, priv->uar); -- cgit From 37e92a9d4fe38dc3e7308913575983a6a088c8d4 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 13 Nov 2017 10:11:27 +0200 Subject: net/mlx5: Fix rate limit packet pacing naming and struct In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/rl.c | 22 +++++++++++----------- 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 1fffdebbc9e8..e9a1fbcc4adf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -362,7 +362,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_QUERY_VPORT_COUNTER: case MLX5_CMD_OP_ALLOC_Q_COUNTER: case MLX5_CMD_OP_QUERY_Q_COUNTER: - case MLX5_CMD_OP_SET_RATE_LIMIT: + case MLX5_CMD_OP_SET_PP_RATE_LIMIT: case MLX5_CMD_OP_QUERY_RATE_LIMIT: case MLX5_CMD_OP_CREATE_SCHEDULING_ELEMENT: case MLX5_CMD_OP_QUERY_SCHEDULING_ELEMENT: @@ -505,7 +505,7 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(ALLOC_Q_COUNTER); MLX5_COMMAND_STR_CASE(DEALLOC_Q_COUNTER); MLX5_COMMAND_STR_CASE(QUERY_Q_COUNTER); - MLX5_COMMAND_STR_CASE(SET_RATE_LIMIT); + MLX5_COMMAND_STR_CASE(SET_PP_RATE_LIMIT); MLX5_COMMAND_STR_CASE(QUERY_RATE_LIMIT); MLX5_COMMAND_STR_CASE(CREATE_SCHEDULING_ELEMENT); MLX5_COMMAND_STR_CASE(DESTROY_SCHEDULING_ELEMENT); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rl.c b/drivers/net/ethernet/mellanox/mlx5/core/rl.c index e651e4c02867..d3c33e9eea72 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/rl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/rl.c @@ -125,16 +125,16 @@ static struct mlx5_rl_entry *find_rl_entry(struct mlx5_rl_table *table, return ret_entry; } -static int mlx5_set_rate_limit_cmd(struct mlx5_core_dev *dev, +static int mlx5_set_pp_rate_limit_cmd(struct mlx5_core_dev *dev, u32 rate, u16 index) { - u32 in[MLX5_ST_SZ_DW(set_rate_limit_in)] = {0}; - u32 out[MLX5_ST_SZ_DW(set_rate_limit_out)] = {0}; + u32 in[MLX5_ST_SZ_DW(set_pp_rate_limit_in)] = {0}; + u32 out[MLX5_ST_SZ_DW(set_pp_rate_limit_out)] = {0}; - MLX5_SET(set_rate_limit_in, in, opcode, - MLX5_CMD_OP_SET_RATE_LIMIT); - MLX5_SET(set_rate_limit_in, in, rate_limit_index, index); - MLX5_SET(set_rate_limit_in, in, rate_limit, rate); + MLX5_SET(set_pp_rate_limit_in, in, opcode, + MLX5_CMD_OP_SET_PP_RATE_LIMIT); + MLX5_SET(set_pp_rate_limit_in, in, rate_limit_index, index); + MLX5_SET(set_pp_rate_limit_in, in, rate_limit, rate); return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); } @@ -173,7 +173,7 @@ int mlx5_rl_add_rate(struct mlx5_core_dev *dev, u32 rate, u16 *index) entry->refcount++; } else { /* new rate limit */ - err = mlx5_set_rate_limit_cmd(dev, rate, entry->index); + err = mlx5_set_pp_rate_limit_cmd(dev, rate, entry->index); if (err) { mlx5_core_err(dev, "Failed configuring rate: %u (%d)\n", rate, err); @@ -209,7 +209,7 @@ void mlx5_rl_remove_rate(struct mlx5_core_dev *dev, u32 rate) entry->refcount--; if (!entry->refcount) { /* need to remove rate */ - mlx5_set_rate_limit_cmd(dev, 0, entry->index); + mlx5_set_pp_rate_limit_cmd(dev, 0, entry->index); entry->rate = 0; } @@ -262,8 +262,8 @@ void mlx5_cleanup_rl_table(struct mlx5_core_dev *dev) /* Clear all configured rates */ for (i = 0; i < table->max_size; i++) if (table->rl_entry[i].rate) - mlx5_set_rate_limit_cmd(dev, 0, - table->rl_entry[i].index); + mlx5_set_pp_rate_limit_cmd(dev, 0, + table->rl_entry[i].index); kfree(dev->priv.rl_table.rl_entry); } -- cgit From ff0891915cd7b24ab27eee9b360c0452853bf9f6 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Thu, 26 Oct 2017 09:56:34 -0500 Subject: net/mlx5e: Fix ETS BW check Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Moshe Shemesh Reviewed-by: Huy Nguyen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index c6d90b6dd80e..9bcf38f4123b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -274,6 +274,7 @@ int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets) static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, struct ieee_ets *ets) { + bool have_ets_tc = false; int bw_sum = 0; int i; @@ -288,11 +289,14 @@ static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, } /* Validate Bandwidth Sum */ - for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) - if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) { + have_ets_tc = true; bw_sum += ets->tc_tx_bw[i]; + } + } - if (bw_sum != 0 && bw_sum != 100) { + if (have_ets_tc && bw_sum != 100) { netdev_err(netdev, "Failed to validate ETS: BW sum is illegal\n"); return -EINVAL; -- cgit From 2989ad1ec03021ee6d2193c35414f1d970a243de Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Tue, 21 Nov 2017 17:49:36 +0200 Subject: net/mlx5e: Fix features check of IPv6 traffic The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index cbec66bc82f1..c535a44ab8ac 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3678,6 +3678,7 @@ static netdev_features_t mlx5e_tunnel_features_check(struct mlx5e_priv *priv, struct sk_buff *skb, netdev_features_t features) { + unsigned int offset = 0; struct udphdr *udph; u8 proto; u16 port; @@ -3687,7 +3688,7 @@ static netdev_features_t mlx5e_tunnel_features_check(struct mlx5e_priv *priv, proto = ip_hdr(skb)->protocol; break; case htons(ETH_P_IPV6): - proto = ipv6_hdr(skb)->nexthdr; + proto = ipv6_find_hdr(skb, &offset, -1, NULL, NULL); break; default: goto out; -- cgit From 696a97cf9f5c551fca257e0d4aa07b5cbde6084a Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Tue, 14 Nov 2017 09:44:55 +0200 Subject: net/mlx5e: Fix defaulting RX ring size when not needed Fixes the bug when turning on/off CQE compression mechanism resets the RX rings size to default value when it is not needed. Fixes: 2fc4bfb7250d ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 8 ++++++-- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 10 ++++++++-- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 15 +++++++-------- drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 2 +- 4 files changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 43f9054830e5..543060c305a0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -82,6 +82,9 @@ max_t(u32, MLX5_MPWRQ_MIN_LOG_STRIDE_SZ(mdev), req) #define MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev) MLX5_MPWRQ_LOG_STRIDE_SZ(mdev, 6) #define MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) MLX5_MPWRQ_LOG_STRIDE_SZ(mdev, 8) +#define MLX5E_MPWQE_STRIDE_SZ(mdev, cqe_cmprs) \ + (cqe_cmprs ? MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) : \ + MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev)) #define MLX5_MPWRQ_LOG_WQE_SZ 18 #define MLX5_MPWRQ_WQE_PAGE_ORDER (MLX5_MPWRQ_LOG_WQE_SZ - PAGE_SHIFT > 0 ? \ @@ -936,8 +939,9 @@ void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode); void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode); -void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, - struct mlx5e_params *params, u8 rq_type); +void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev, + struct mlx5e_params *params, + u8 rq_type); static inline bool mlx5e_tunnel_inner_ft_supported(struct mlx5_core_dev *mdev) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 23425f028405..8f05efa5c829 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1523,8 +1523,10 @@ int mlx5e_modify_rx_cqe_compression_locked(struct mlx5e_priv *priv, bool new_val new_channels.params = priv->channels.params; MLX5E_SET_PFLAG(&new_channels.params, MLX5E_PFLAG_RX_CQE_COMPRESS, new_val); - mlx5e_set_rq_type_params(priv->mdev, &new_channels.params, - new_channels.params.rq_wq_type); + new_channels.params.mpwqe_log_stride_sz = + MLX5E_MPWQE_STRIDE_SZ(priv->mdev, new_val); + new_channels.params.mpwqe_log_num_strides = + MLX5_MPWRQ_LOG_WQE_SZ - new_channels.params.mpwqe_log_stride_sz; if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { priv->channels.params = new_channels.params; @@ -1536,6 +1538,10 @@ int mlx5e_modify_rx_cqe_compression_locked(struct mlx5e_priv *priv, bool new_val return err; mlx5e_switch_priv_channels(priv, &new_channels, NULL); + mlx5e_dbg(DRV, priv, "MLX5E: RxCqeCmprss was turned %s\n", + MLX5E_GET_PFLAG(&priv->channels.params, + MLX5E_PFLAG_RX_CQE_COMPRESS) ? "ON" : "OFF"); + return 0; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c535a44ab8ac..d9d8227f195f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -78,8 +78,8 @@ static bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev) MLX5_CAP_ETH(mdev, reg_umr_sq); } -void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, - struct mlx5e_params *params, u8 rq_type) +void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev, + struct mlx5e_params *params, u8 rq_type) { params->rq_wq_type = rq_type; params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ; @@ -88,10 +88,8 @@ void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, params->log_rq_size = is_kdump_kernel() ? MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE_MPW : MLX5E_PARAMS_DEFAULT_LOG_RQ_SIZE_MPW; - params->mpwqe_log_stride_sz = - MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS) ? - MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) : - MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev); + params->mpwqe_log_stride_sz = MLX5E_MPWQE_STRIDE_SZ(mdev, + MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS)); params->mpwqe_log_num_strides = MLX5_MPWRQ_LOG_WQE_SZ - params->mpwqe_log_stride_sz; break; @@ -115,13 +113,14 @@ void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev, MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS)); } -static void mlx5e_set_rq_params(struct mlx5_core_dev *mdev, struct mlx5e_params *params) +static void mlx5e_set_rq_params(struct mlx5_core_dev *mdev, + struct mlx5e_params *params) { u8 rq_type = mlx5e_check_fragmented_striding_rq_cap(mdev) && !params->xdp_prog && !MLX5_IPSEC_DEV(mdev) ? MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ : MLX5_WQ_TYPE_LINKED_LIST; - mlx5e_set_rq_type_params(mdev, params, rq_type); + mlx5e_init_rq_type_params(mdev, params, rq_type); } static void mlx5e_update_carrier(struct mlx5e_priv *priv) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index d2a66dc4adc6..8812d7208e8f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -57,7 +57,7 @@ static void mlx5i_build_nic_params(struct mlx5_core_dev *mdev, struct mlx5e_params *params) { /* Override RQ params as IPoIB supports only LINKED LIST RQ for now */ - mlx5e_set_rq_type_params(mdev, params, MLX5_WQ_TYPE_LINKED_LIST); + mlx5e_init_rq_type_params(mdev, params, MLX5_WQ_TYPE_LINKED_LIST); /* RQ size in ipoib by default is 512 */ params->log_rq_size = is_kdump_kernel() ? -- cgit From 777ec2b2a3f2760505db395de1a9fa4115d74548 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 16 Nov 2017 14:57:48 +0200 Subject: net/mlx5: Fix misspelling in the error message and comment Fix misspelling in word syndrome. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/health.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 60771865c99c..0308a2b4823c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -466,7 +466,7 @@ static irqreturn_t mlx5_eq_int(int irq, void *eq_ptr) break; case MLX5_EVENT_TYPE_CQ_ERROR: cqn = be32_to_cpu(eqe->data.cq_err.cqn) & 0xffffff; - mlx5_core_warn(dev, "CQ error on CQN 0x%x, syndrom 0x%x\n", + mlx5_core_warn(dev, "CQ error on CQN 0x%x, syndrome 0x%x\n", cqn, eqe->data.cq_err.syndrome); mlx5_cq_event(dev, cqn, eqe->type); break; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index 1a0e797ad001..21d29f7936f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -241,7 +241,7 @@ static void print_health_info(struct mlx5_core_dev *dev) u32 fw; int i; - /* If the syndrom is 0, the device is OK and no need to print buffer */ + /* If the syndrome is 0, the device is OK and no need to print buffer */ if (!ioread8(&h->synd)) return; -- cgit From dbff26e44dc3ec4de6578733b054a0114652a764 Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Mon, 4 Dec 2017 08:59:25 +0200 Subject: net/mlx5: Fix error flow in CREATE_QP command In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by: Moni Shoua Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c index db9e665ab104..889130edb715 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c @@ -213,8 +213,8 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev, err_cmd: memset(din, 0, sizeof(din)); memset(dout, 0, sizeof(dout)); - MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP); - MLX5_SET(destroy_qp_in, in, qpn, qp->qpn); + MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP); + MLX5_SET(destroy_qp_in, din, qpn, qp->qpn); mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout)); return err; } -- cgit From 6323514116404cc651df1b7fffa1311ddf8ce647 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 23 Nov 2017 13:52:28 +0200 Subject: net/mlx5e: Fix possible deadlock of VXLAN lock mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user context) and mlx5e_features_check (softirq), but the lock acquired does not disable bottom half and might result in deadlock. Fix it by simply replacing spin_lock() with spin_lock_bh(). While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh(). lockdep's WARNING: inconsistent lock state [ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes: [ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028528] {SOFTIRQ-ON-W} state was registered at: [ 654.028607] _raw_spin_lock+0x3c/0x70 [ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core] [ 654.028878] process_one_work+0x1e9/0x640 [ 654.028942] worker_thread+0x4a/0x3f0 [ 654.029002] kthread+0x141/0x180 [ 654.029056] ret_from_fork+0x24/0x30 [ 654.029114] irq event stamp: 579088 [ 654.029174] hardirqs last enabled at (579088): [] ip6_finish_output2+0x49a/0x8c0 [ 654.029309] hardirqs last disabled at (579087): [] ip6_finish_output2+0x44e/0x8c0 [ 654.029446] softirqs last enabled at (579030): [] irq_enter+0x6d/0x80 [ 654.029567] softirqs last disabled at (579031): [] irq_exit+0xb5/0xc0 [ 654.029684] other info that might help us debug this: [ 654.029781] Possible unsafe locking scenario: [ 654.029868] CPU0 [ 654.029908] ---- [ 654.029947] lock(&(&vxlan_db->lock)->rlock); [ 654.030045] [ 654.030090] lock(&(&vxlan_db->lock)->rlock); [ 654.030162] *** DEADLOCK *** Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index 07a9ba6cfc70..f8238275759f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -71,9 +71,9 @@ struct mlx5e_vxlan *mlx5e_vxlan_lookup_port(struct mlx5e_priv *priv, u16 port) struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan; struct mlx5e_vxlan *vxlan; - spin_lock(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); vxlan = radix_tree_lookup(&vxlan_db->tree, port); - spin_unlock(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); return vxlan; } @@ -100,9 +100,9 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) vxlan->udp_port = port; - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); err = radix_tree_insert(&vxlan_db->tree, vxlan->udp_port, vxlan); - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); if (err) goto err_free; @@ -121,9 +121,9 @@ static void __mlx5e_vxlan_core_del_port(struct mlx5e_priv *priv, u16 port) struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan; struct mlx5e_vxlan *vxlan; - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); vxlan = radix_tree_delete(&vxlan_db->tree, port); - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); if (!vxlan) return; @@ -171,12 +171,12 @@ void mlx5e_vxlan_cleanup(struct mlx5e_priv *priv) struct mlx5e_vxlan *vxlan; unsigned int port = 0; - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); while (radix_tree_gang_lookup(&vxlan_db->tree, (void **)&vxlan, port, 1)) { port = vxlan->udp_port; - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); __mlx5e_vxlan_core_del_port(priv, (u16)port); - spin_lock_irq(&vxlan_db->lock); + spin_lock_bh(&vxlan_db->lock); } - spin_unlock_irq(&vxlan_db->lock); + spin_unlock_bh(&vxlan_db->lock); } -- cgit From 23f4cc2cd9ed92570647220aca60d0197d8c1fa9 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Sun, 3 Dec 2017 13:58:50 +0200 Subject: net/mlx5e: Add refcount to VXLAN structure A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 50 +++++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/vxlan.h | 1 + 2 files changed, 28 insertions(+), 23 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index f8238275759f..25f782344667 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -88,8 +88,11 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; - if (mlx5e_vxlan_lookup_port(priv, port)) + vxlan = mlx5e_vxlan_lookup_port(priv, port); + if (vxlan) { + atomic_inc(&vxlan->refcount); goto free_work; + } if (mlx5e_vxlan_core_add_port_cmd(priv->mdev, port)) goto free_work; @@ -99,6 +102,7 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) goto err_delete_port; vxlan->udp_port = port; + atomic_set(&vxlan->refcount, 1); spin_lock_bh(&vxlan_db->lock); err = radix_tree_insert(&vxlan_db->tree, vxlan->udp_port, vxlan); @@ -116,32 +120,33 @@ free_work: kfree(vxlan_work); } -static void __mlx5e_vxlan_core_del_port(struct mlx5e_priv *priv, u16 port) +static void mlx5e_vxlan_del_port(struct work_struct *work) { + struct mlx5e_vxlan_work *vxlan_work = + container_of(work, struct mlx5e_vxlan_work, work); + struct mlx5e_priv *priv = vxlan_work->priv; struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan; + u16 port = vxlan_work->port; struct mlx5e_vxlan *vxlan; + bool remove = false; spin_lock_bh(&vxlan_db->lock); - vxlan = radix_tree_delete(&vxlan_db->tree, port); - spin_unlock_bh(&vxlan_db->lock); - + vxlan = radix_tree_lookup(&vxlan_db->tree, port); if (!vxlan) - return; - - mlx5e_vxlan_core_del_port_cmd(priv->mdev, vxlan->udp_port); - - kfree(vxlan); -} + goto out_unlock; -static void mlx5e_vxlan_del_port(struct work_struct *work) -{ - struct mlx5e_vxlan_work *vxlan_work = - container_of(work, struct mlx5e_vxlan_work, work); - struct mlx5e_priv *priv = vxlan_work->priv; - u16 port = vxlan_work->port; + if (atomic_dec_and_test(&vxlan->refcount)) { + radix_tree_delete(&vxlan_db->tree, port); + remove = true; + } - __mlx5e_vxlan_core_del_port(priv, port); +out_unlock: + spin_unlock_bh(&vxlan_db->lock); + if (remove) { + mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); + kfree(vxlan); + } kfree(vxlan_work); } @@ -171,12 +176,11 @@ void mlx5e_vxlan_cleanup(struct mlx5e_priv *priv) struct mlx5e_vxlan *vxlan; unsigned int port = 0; - spin_lock_bh(&vxlan_db->lock); + /* Lockless since we are the only radix-tree consumers, wq is disabled */ while (radix_tree_gang_lookup(&vxlan_db->tree, (void **)&vxlan, port, 1)) { port = vxlan->udp_port; - spin_unlock_bh(&vxlan_db->lock); - __mlx5e_vxlan_core_del_port(priv, (u16)port); - spin_lock_bh(&vxlan_db->lock); + radix_tree_delete(&vxlan_db->tree, port); + mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); + kfree(vxlan); } - spin_unlock_bh(&vxlan_db->lock); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h index 5def12c048e3..5ef6ae7d568a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.h @@ -36,6 +36,7 @@ #include "en.h" struct mlx5e_vxlan { + atomic_t refcount; u16 udp_port; }; -- cgit From 0c1cc8b2215f5122ca614b5adca60346018758c3 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 4 Dec 2017 09:57:43 +0200 Subject: net/mlx5e: Prevent possible races in VXLAN control flow When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index 25f782344667..2f74953e4561 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -88,6 +88,7 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; + mutex_lock(&priv->state_lock); vxlan = mlx5e_vxlan_lookup_port(priv, port); if (vxlan) { atomic_inc(&vxlan->refcount); @@ -117,6 +118,7 @@ err_free: err_delete_port: mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); free_work: + mutex_unlock(&priv->state_lock); kfree(vxlan_work); } @@ -130,6 +132,7 @@ static void mlx5e_vxlan_del_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; bool remove = false; + mutex_lock(&priv->state_lock); spin_lock_bh(&vxlan_db->lock); vxlan = radix_tree_lookup(&vxlan_db->tree, port); if (!vxlan) @@ -147,6 +150,7 @@ out_unlock: mlx5e_vxlan_core_del_port_cmd(priv->mdev, port); kfree(vxlan); } + mutex_unlock(&priv->state_lock); kfree(vxlan_work); } -- cgit From 139ed6c6c46aa3d8970a086b8e0cf1f3522f5d4a Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Tue, 5 Dec 2017 13:45:21 +0200 Subject: net/mlx5: Fix steering memory leak Flow steering priority and namespace are software only objects that didn't have the proper destructors and were not freed during steering cleanup. Fix it by adding destructor functions for these objects. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index c70fd663a633..dfaad9ecb2b8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -174,6 +174,8 @@ static void del_hw_fte(struct fs_node *node); static void del_sw_flow_table(struct fs_node *node); static void del_sw_flow_group(struct fs_node *node); static void del_sw_fte(struct fs_node *node); +static void del_sw_prio(struct fs_node *node); +static void del_sw_ns(struct fs_node *node); /* Delete rule (destination) is special case that * requires to lock the FTE for all the deletion process. */ @@ -408,6 +410,16 @@ static inline struct mlx5_core_dev *get_dev(struct fs_node *node) return NULL; } +static void del_sw_ns(struct fs_node *node) +{ + kfree(node); +} + +static void del_sw_prio(struct fs_node *node) +{ + kfree(node); +} + static void del_hw_flow_table(struct fs_node *node) { struct mlx5_flow_table *ft; @@ -2064,7 +2076,7 @@ static struct fs_prio *fs_create_prio(struct mlx5_flow_namespace *ns, return ERR_PTR(-ENOMEM); fs_prio->node.type = FS_TYPE_PRIO; - tree_init_node(&fs_prio->node, NULL, NULL); + tree_init_node(&fs_prio->node, NULL, del_sw_prio); tree_add_node(&fs_prio->node, &ns->node); fs_prio->num_levels = num_levels; fs_prio->prio = prio; @@ -2090,7 +2102,7 @@ static struct mlx5_flow_namespace *fs_create_namespace(struct fs_prio *prio) return ERR_PTR(-ENOMEM); fs_init_namespace(ns); - tree_init_node(&ns->node, NULL, NULL); + tree_init_node(&ns->node, NULL, del_sw_ns); tree_add_node(&ns->node, &prio->node); list_add_tail(&ns->node.list, &prio->node.children); -- cgit From d6b2785cd55ee72e9608762650b3ef299f801b1b Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Tue, 21 Nov 2017 15:15:51 +0200 Subject: net/mlx5: Cleanup IRQs in case of unload failure When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 0308a2b4823c..ab4d1465b7e4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -775,7 +775,7 @@ err1: return err; } -int mlx5_stop_eqs(struct mlx5_core_dev *dev) +void mlx5_stop_eqs(struct mlx5_core_dev *dev) { struct mlx5_eq_table *table = &dev->priv.eq_table; int err; @@ -784,22 +784,28 @@ int mlx5_stop_eqs(struct mlx5_core_dev *dev) if (MLX5_CAP_GEN(dev, pg)) { err = mlx5_destroy_unmap_eq(dev, &table->pfault_eq); if (err) - return err; + mlx5_core_err(dev, "failed to destroy page fault eq, err(%d)\n", + err); } #endif err = mlx5_destroy_unmap_eq(dev, &table->pages_eq); if (err) - return err; + mlx5_core_err(dev, "failed to destroy pages eq, err(%d)\n", + err); - mlx5_destroy_unmap_eq(dev, &table->async_eq); + err = mlx5_destroy_unmap_eq(dev, &table->async_eq); + if (err) + mlx5_core_err(dev, "failed to destroy async eq, err(%d)\n", + err); mlx5_cmd_use_polling(dev); err = mlx5_destroy_unmap_eq(dev, &table->cmd_eq); - if (err) + if (err) { + mlx5_core_err(dev, "failed to destroy command eq, err(%d)\n", + err); mlx5_cmd_use_events(dev); - - return err; + } } int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq, -- cgit From a2fba188fd5eadd6061bef4f2f2577a43231ebf3 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Mon, 4 Dec 2017 15:23:51 +0200 Subject: net/mlx5: Stay in polling mode when command EQ destroy fails During unload, on mlx5_stop_eqs we move command interface from events mode to polling mode, but if command interface EQ destroy fail we move back to events mode. That's wrong since even if we fail to destroy command interface EQ, we do release its irq, so no interrupts will be received. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index ab4d1465b7e4..e7e7cef2bde4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -801,11 +801,9 @@ void mlx5_stop_eqs(struct mlx5_core_dev *dev) mlx5_cmd_use_polling(dev); err = mlx5_destroy_unmap_eq(dev, &table->cmd_eq); - if (err) { + if (err) mlx5_core_err(dev, "failed to destroy command eq, err(%d)\n", err); - mlx5_cmd_use_events(dev); - } } int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq, -- cgit From 4423c18e466afdfb02a36ee8b9f901d144b3c607 Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Tue, 19 Dec 2017 17:59:45 +0100 Subject: net: mvneta: clear interface link status on port disable When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Cc: Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev Tested-by: Dmitri Epshtein Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index bc93b69cfd1e..16b2bfb2cf51 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1214,6 +1214,10 @@ static void mvneta_port_disable(struct mvneta_port *pp) val &= ~MVNETA_GMAC0_PORT_ENABLE; mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); + pp->link = 0; + pp->duplex = -1; + pp->speed = 0; + udelay(200); } -- cgit From ca5902a6547f662419689ca28b3c29a772446caa Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Tue, 19 Dec 2017 17:59:46 +0100 Subject: net: mvneta: use proper rxq_number in loop on rx queues When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Cc: stable@vger.kernel.org Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev Tested-by: Dmitri Epshtein Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 16b2bfb2cf51..1e0835655c93 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3015,7 +3015,7 @@ static void mvneta_cleanup_rxqs(struct mvneta_port *pp) { int queue; - for (queue = 0; queue < txq_number; queue++) + for (queue = 0; queue < rxq_number; queue++) mvneta_rxq_deinit(pp, &pp->rxqs[queue]); } -- cgit From 2eecb2e04abb62ef8ea7b43e1a46bdb5b99d1bf8 Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Tue, 19 Dec 2017 17:59:47 +0100 Subject: net: mvneta: eliminate wrong call to handle rx descriptor error There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Cc: stable@vger.kernel.org Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev Tested-by: Dmitri Epshtein Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 1e0835655c93..a539263cd79c 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1962,9 +1962,9 @@ static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo, if (!mvneta_rxq_desc_is_first_last(rx_status) || (rx_status & MVNETA_RXD_ERR_SUMMARY)) { + mvneta_rx_error(pp, rx_desc); err_drop_frame: dev->stats.rx_errors++; - mvneta_rx_error(pp, rx_desc); /* leave the descriptor untouched */ continue; } -- cgit From 102740bd9436a3a6ba129af3a48271d794009fa5 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 19 Dec 2017 13:32:13 -0800 Subject: cls_bpf: fix offload assumptions after callback conversion cls_bpf used to take care of tracking what offload state a filter is in, i.e. it would track if offload request succeeded or not. This information would then be used to issue correct requests to the driver, e.g. requests for statistics only on offloaded filters, removing only filters which were offloaded, using add instead of replace if previous filter was not added etc. This tracking of offload state no longer functions with the new callback infrastructure. There could be multiple entities trying to offload the same filter. Throw out all the tracking and corresponding commands and simply pass to the drivers both old and new bpf program. Drivers will have to deal with offload state tracking by themselves. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index e379b78e86ef..a4cf62ba4604 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -110,16 +110,10 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, return -EOPNOTSUPP; } - switch (cls_bpf->command) { - case TC_CLSBPF_REPLACE: - return nfp_net_bpf_offload(nn, cls_bpf->prog, true); - case TC_CLSBPF_ADD: - return nfp_net_bpf_offload(nn, cls_bpf->prog, false); - case TC_CLSBPF_DESTROY: - return nfp_net_bpf_offload(nn, NULL, true); - default: + if (cls_bpf->command != TC_CLSBPF_OFFLOAD) return -EOPNOTSUPP; - } + + return nfp_net_bpf_offload(nn, cls_bpf->prog, cls_bpf->oldprog); } static int nfp_bpf_setup_tc_block(struct net_device *netdev, -- cgit From d3f89b98e391475419ae2d8834813d3ecbb48f67 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 19 Dec 2017 13:32:14 -0800 Subject: nfp: bpf: keep track of the offloaded program After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. The check for nn->dp.bpf_offload_xdp was a stop gap solution to make sure failed TC offload won't disable XDP, it's no longer necessary. nfp_net_bpf_offload() will return -EBUSY on TC vs XDP conflicts. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 47 ++++++++++++++++++++++++--- drivers/net/ethernet/netronome/nfp/bpf/main.h | 8 +++++ 2 files changed, 51 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index a4cf62ba4604..13190aa09faf 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -82,10 +82,33 @@ static const char *nfp_bpf_extra_cap(struct nfp_app *app, struct nfp_net *nn) return nfp_net_ebpf_capable(nn) ? "BPF" : ""; } +static int +nfp_bpf_vnic_alloc(struct nfp_app *app, struct nfp_net *nn, unsigned int id) +{ + int err; + + nn->app_priv = kzalloc(sizeof(struct nfp_bpf_vnic), GFP_KERNEL); + if (!nn->app_priv) + return -ENOMEM; + + err = nfp_app_nic_vnic_alloc(app, nn, id); + if (err) + goto err_free_priv; + + return 0; +err_free_priv: + kfree(nn->app_priv); + return err; +} + static void nfp_bpf_vnic_free(struct nfp_app *app, struct nfp_net *nn) { + struct nfp_bpf_vnic *bv = nn->app_priv; + if (nn->dp.bpf_offload_xdp) nfp_bpf_xdp_offload(app, nn, NULL); + WARN_ON(bv->tc_prog); + kfree(bv); } static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, @@ -93,6 +116,9 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, { struct tc_cls_bpf_offload *cls_bpf = type_data; struct nfp_net *nn = cb_priv; + struct bpf_prog *oldprog; + struct nfp_bpf_vnic *bv; + int err; if (type != TC_SETUP_CLSBPF || !tc_can_offload(nn->dp.netdev) || @@ -100,8 +126,6 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, cls_bpf->common.protocol != htons(ETH_P_ALL) || cls_bpf->common.chain_index) return -EOPNOTSUPP; - if (nn->dp.bpf_offload_xdp) - return -EBUSY; /* Only support TC direct action */ if (!cls_bpf->exts_integrated || @@ -113,7 +137,22 @@ static int nfp_bpf_setup_tc_block_cb(enum tc_setup_type type, if (cls_bpf->command != TC_CLSBPF_OFFLOAD) return -EOPNOTSUPP; - return nfp_net_bpf_offload(nn, cls_bpf->prog, cls_bpf->oldprog); + bv = nn->app_priv; + oldprog = cls_bpf->oldprog; + + /* Don't remove if oldprog doesn't match driver's state */ + if (bv->tc_prog != oldprog) { + oldprog = NULL; + if (!cls_bpf->prog) + return 0; + } + + err = nfp_net_bpf_offload(nn, cls_bpf->prog, oldprog); + if (err) + return err; + + bv->tc_prog = cls_bpf->prog; + return 0; } static int nfp_bpf_setup_tc_block(struct net_device *netdev, @@ -161,7 +200,7 @@ const struct nfp_app_type app_bpf = { .extra_cap = nfp_bpf_extra_cap, - .vnic_alloc = nfp_app_nic_vnic_alloc, + .vnic_alloc = nfp_bpf_vnic_alloc, .vnic_free = nfp_bpf_vnic_free, .setup_tc = nfp_bpf_setup_tc, diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.h b/drivers/net/ethernet/netronome/nfp/bpf/main.h index 082a15f6dfb5..57b6043177a3 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.h +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.h @@ -172,6 +172,14 @@ struct nfp_prog { struct list_head insns; }; +/** + * struct nfp_bpf_vnic - per-vNIC BPF priv structure + * @tc_prog: currently loaded cls_bpf program + */ +struct nfp_bpf_vnic { + struct bpf_prog *tc_prog; +}; + int nfp_bpf_jit(struct nfp_prog *prog); extern const struct bpf_ext_analyzer_ops nfp_bpf_analyzer_ops; -- cgit From 71a0ff65a21bf3e2c4fde208c4a635ed2bbb4e81 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Thu, 21 Dec 2017 17:38:26 +0200 Subject: IB/mlx5: Fix congestion counters in LAG mode Congestion counters are counted and queried per physical function. When working in LAG mode, CNP packets can be sent or received on both of the functions, thus congestion counters should be aggregated from the two physical functions. Fixes: e1f24a79f424 ("IB/mlx5: Support congestion related counters") Signed-off-by: Majd Dibbiny Reviewed-by: Aviv Heller Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/net/ethernet/mellanox/mlx5/core/lag.c | 56 +++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c index f26f97fe4666..582b2f18010a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c @@ -137,6 +137,17 @@ int mlx5_cmd_destroy_vport_lag(struct mlx5_core_dev *dev) } EXPORT_SYMBOL(mlx5_cmd_destroy_vport_lag); +static int mlx5_cmd_query_cong_counter(struct mlx5_core_dev *dev, + bool reset, void *out, int out_size) +{ + u32 in[MLX5_ST_SZ_DW(query_cong_statistics_in)] = { }; + + MLX5_SET(query_cong_statistics_in, in, opcode, + MLX5_CMD_OP_QUERY_CONG_STATISTICS); + MLX5_SET(query_cong_statistics_in, in, clear, reset); + return mlx5_cmd_exec(dev, in, sizeof(in), out, out_size); +} + static struct mlx5_lag *mlx5_lag_dev_get(struct mlx5_core_dev *dev) { return dev->priv.lag; @@ -633,3 +644,48 @@ bool mlx5_lag_intf_add(struct mlx5_interface *intf, struct mlx5_priv *priv) /* If bonded, we do not add an IB device for PF1. */ return false; } + +int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev, + u64 *values, + int num_counters, + size_t *offsets) +{ + int outlen = MLX5_ST_SZ_BYTES(query_cong_statistics_out); + struct mlx5_core_dev *mdev[MLX5_MAX_PORTS]; + struct mlx5_lag *ldev; + int num_ports; + int ret, i, j; + void *out; + + out = kvzalloc(outlen, GFP_KERNEL); + if (!out) + return -ENOMEM; + + memset(values, 0, sizeof(*values) * num_counters); + + mutex_lock(&lag_mutex); + ldev = mlx5_lag_dev_get(dev); + if (ldev && mlx5_lag_is_bonded(ldev)) { + num_ports = MLX5_MAX_PORTS; + mdev[0] = ldev->pf[0].dev; + mdev[1] = ldev->pf[1].dev; + } else { + num_ports = 1; + mdev[0] = dev; + } + + for (i = 0; i < num_ports; ++i) { + ret = mlx5_cmd_query_cong_counter(mdev[i], false, out, outlen); + if (ret) + goto unlock; + + for (j = 0; j < num_counters; ++j) + values[j] += be64_to_cpup((__be64 *)(out + offsets[j])); + } + +unlock: + mutex_unlock(&lag_mutex); + kvfree(out); + return ret; +} +EXPORT_SYMBOL(mlx5_lag_query_cong_counters); -- cgit From 178e5f57a8d8f8fc5799a624b96fc31ef9a29ffa Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Fri, 22 Dec 2017 17:12:09 +0800 Subject: net: fec: unmap the xmit buffer that are not transferred by DMA The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 610573855213..8184d2fca9be 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -818,6 +818,12 @@ static void fec_enet_bd_init(struct net_device *dev) for (i = 0; i < txq->bd.ring_size; i++) { /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = cpu_to_fec16(0); + if (bdp->cbd_bufaddr && + !IS_TSO_HEADER(txq, fec32_to_cpu(bdp->cbd_bufaddr))) + dma_unmap_single(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), + DMA_TO_DEVICE); if (txq->tx_skbuff[i]) { dev_kfree_skb_any(txq->tx_skbuff[i]); txq->tx_skbuff[i] = NULL; -- cgit From 5a8bae9761dc5dd409ff5c3a529b2801bd0dac3a Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Fri, 22 Dec 2017 16:05:27 +0530 Subject: tg3: Update copyright Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 6 ++++-- drivers/net/ethernet/broadcom/tg3.h | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d09c5a9c53b5..5fe8d9b05f31 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4,11 +4,13 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005-2014 Broadcom Corporation. + * Copyright (C) 2005-2016 Broadcom Corporation. + * Copyright (C) 2016-2017 Broadcom Limited. * * Firmware is: * Derived from proprietary unpublished source code, - * Copyright (C) 2000-2003 Broadcom Corporation. + * Copyright (C) 2000-2016 Broadcom Corporation. + * Copyright (C) 2016-2017 Broadcom Ltd. * * Permission is hereby granted for the distribution of this firmware * data in hexadecimal or equivalent format, provided this copyright diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index c2d02d02d1e6..3d60fc7a2da6 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -5,7 +5,8 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2007-2014 Broadcom Corporation. + * Copyright (C) 2007-2016 Broadcom Corporation. + * Copyright (C) 2016-2017 Broadcom Limited. */ #ifndef _T3_H -- cgit From 4419bb1cedcda0272e1dc410345c5a1d1da0e367 Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Fri, 22 Dec 2017 16:05:28 +0530 Subject: tg3: Add workaround to restrict 5762 MRRS to 2048 One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 10 ++++++++++ drivers/net/ethernet/broadcom/tg3.h | 4 ++++ 2 files changed, 14 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 5fe8d9b05f31..a0caa71a8c3b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -10054,6 +10054,16 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tw32(GRC_MODE, tp->grc_mode | val); + /* On one of the AMD platform, MRRS is restricted to 4000 because of + * south bridge limitation. As a workaround, Driver is setting MRRS + * to 2048 instead of default 4096. + */ + if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && + tp->pdev->subsystem_device == TG3PCI_SUBDEVICE_ID_DELL_5762) { + val = tr32(TG3PCI_DEV_STATUS_CTRL) & ~MAX_READ_REQ_MASK; + tw32(TG3PCI_DEV_STATUS_CTRL, val | MAX_READ_REQ_SIZE_2048); + } + /* Setup the timer prescalar register. Clock is always 66Mhz. */ val = tr32(GRC_MISC_CFG); val &= ~0xff; diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 3d60fc7a2da6..1f0271fa7c74 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -97,6 +97,7 @@ #define TG3PCI_SUBDEVICE_ID_DELL_JAGUAR 0x0106 #define TG3PCI_SUBDEVICE_ID_DELL_MERLOT 0x0109 #define TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT 0x010a +#define TG3PCI_SUBDEVICE_ID_DELL_5762 0x07f0 #define TG3PCI_SUBVENDOR_ID_COMPAQ PCI_VENDOR_ID_COMPAQ #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE 0x007c #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2 0x009a @@ -282,6 +283,9 @@ #define TG3PCI_STD_RING_PROD_IDX 0x00000098 /* 64-bit */ #define TG3PCI_RCV_RET_RING_CON_IDX 0x000000a0 /* 64-bit */ /* 0xa8 --> 0xb8 unused */ +#define TG3PCI_DEV_STATUS_CTRL 0x000000b4 +#define MAX_READ_REQ_SIZE_2048 0x00004000 +#define MAX_READ_REQ_MASK 0x00007000 #define TG3PCI_DUAL_MAC_CTRL 0x000000b8 #define DUAL_MAC_CTRL_CH_MASK 0x00000003 #define DUAL_MAC_CTRL_ID 0x00000004 -- cgit From e60ee41aaf898584205a6af5c996860d0fe6a836 Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Fri, 22 Dec 2017 16:05:29 +0530 Subject: tg3: Enable PHY reset in MTU change path for 5720 A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a0caa71a8c3b..8995cfefbfcf 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14239,7 +14239,8 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) */ if (tg3_asic_rev(tp) == ASIC_REV_57766 || tg3_asic_rev(tp) == ASIC_REV_5717 || - tg3_asic_rev(tp) == ASIC_REV_5719) + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) reset_phy = true; err = tg3_restart_hw(tp, reset_phy); -- cgit From f7084059a9cb9e56a186e1677b1dcffd76c2cd24 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Fri, 22 Dec 2017 13:01:39 -0200 Subject: bnx2x: Improve reliability in case of nested PCI errors While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem Signed-off-by: Guilherme G. Piccoli Acked-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 4c739d5355d2..8ae269ec17a1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3030,7 +3030,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) del_timer_sync(&bp->timer); - if (IS_PF(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* Set ALWAYS_ALIVE bit in shmem */ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; bnx2x_drv_pulse(bp); @@ -3116,7 +3116,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) bp->cnic_loaded = false; /* Clear driver version indication in shmem */ - if (IS_PF(bp)) + if (IS_PF(bp) && !BP_NOMCP(bp)) bnx2x_update_mng_version(bp); /* Check if there are pending parity attentions. If there are - set diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 91e2a7560b48..ddd5d3ebd201 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9578,6 +9578,15 @@ static int bnx2x_init_shmem(struct bnx2x *bp) do { bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + + /* If we read all 0xFFs, means we are in PCI error state and + * should bail out to avoid crashes on adapter's FW reads. + */ + if (bp->common.shmem_base == 0xFFFFFFFF) { + bp->flags |= NO_MCP_FLAG; + return -ENODEV; + } + if (bp->common.shmem_base) { val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); if (val & SHR_MEM_VALIDITY_MB) @@ -14320,7 +14329,10 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) BNX2X_ERR("IO slot reset --> driver unload\n"); /* MCP should have been reset; Need to wait for validity */ - bnx2x_init_shmem(bp); + if (bnx2x_init_shmem(bp)) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { u32 v; -- cgit From 8764a8267b128405cf383157d5e9a4a3735d2409 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 25 Dec 2017 08:57:35 +0100 Subject: mlxsw: spectrum_router: Fix NULL pointer deref When we remove the neighbour associated with a nexthop we should always refuse to write the nexthop to the adjacency table. Regardless if it is already present in the table or not. Otherwise, we risk dereferencing the NULL pointer that was set instead of the neighbour. Fixes: a7ff87acd995 ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by: Ido Schimmel Reported-by: Alexander Petrovskiy Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index be657b8533f0..434b3922b34f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -3228,7 +3228,7 @@ static void __mlxsw_sp_nexthop_neigh_update(struct mlxsw_sp_nexthop *nh, { if (!removing) nh->should_offload = 1; - else if (nh->offloaded) + else nh->should_offload = 0; nh->update = 1; } -- cgit From 90045fc9c78855bdc625a0ab185d97b72a937613 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 25 Dec 2017 09:05:33 +0100 Subject: mlxsw: spectrum: Relax sanity checks during enslavement Since commit 25cc72a33835 ("mlxsw: spectrum: Forbid linking to devices that have uppers") the driver forbids enslavement to netdevs that already have uppers of their own, as this can result in various ordering problems. This requirement proved to be too strict for some users who need to be able to enslave ports to a bridge that already has uppers. In this case, we can allow the enslavement if the bridge is already known to us, as any configuration performed on top of the bridge was already reflected to the device. Fixes: 25cc72a33835 ("mlxsw: spectrum: Forbid linking to devices that have uppers") Signed-off-by: Ido Schimmel Reported-by: Alexander Petrovskiy Tested-by: Alexander Petrovskiy Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 11 +++++++++-- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 2 ++ drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 6 ++++++ 3 files changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 9bd8d28de152..c3837ca7a705 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -4376,7 +4376,10 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev, } if (!info->linking) break; - if (netdev_has_any_upper_dev(upper_dev)) { + if (netdev_has_any_upper_dev(upper_dev) && + (!netif_is_bridge_master(upper_dev) || + !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp, + upper_dev))) { NL_SET_ERR_MSG(extack, "spectrum: Enslaving a port to a device that already has an upper device is not supported"); return -EINVAL; @@ -4504,6 +4507,7 @@ static int mlxsw_sp_netdevice_port_vlan_event(struct net_device *vlan_dev, u16 vid) { struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev); + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct netdev_notifier_changeupper_info *info = ptr; struct netlink_ext_ack *extack; struct net_device *upper_dev; @@ -4520,7 +4524,10 @@ static int mlxsw_sp_netdevice_port_vlan_event(struct net_device *vlan_dev, } if (!info->linking) break; - if (netdev_has_any_upper_dev(upper_dev)) { + if (netdev_has_any_upper_dev(upper_dev) && + (!netif_is_bridge_master(upper_dev) || + !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp, + upper_dev))) { NL_SET_ERR_MSG(extack, "spectrum: Enslaving a port to a device that already has an upper device is not supported"); return -EINVAL; } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index 432ab9b12b7f..05ce1befd9b3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -365,6 +365,8 @@ int mlxsw_sp_port_bridge_join(struct mlxsw_sp_port *mlxsw_sp_port, void mlxsw_sp_port_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_port, struct net_device *brport_dev, struct net_device *br_dev); +bool mlxsw_sp_bridge_device_is_offloaded(const struct mlxsw_sp *mlxsw_sp, + const struct net_device *br_dev); /* spectrum.c */ int mlxsw_sp_port_ets_set(struct mlxsw_sp_port *mlxsw_sp_port, diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 7b8548e25ae7..593ad31be749 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -152,6 +152,12 @@ mlxsw_sp_bridge_device_find(const struct mlxsw_sp_bridge *bridge, return NULL; } +bool mlxsw_sp_bridge_device_is_offloaded(const struct mlxsw_sp *mlxsw_sp, + const struct net_device *br_dev) +{ + return !!mlxsw_sp_bridge_device_find(mlxsw_sp->bridge, br_dev); +} + static struct mlxsw_sp_bridge_device * mlxsw_sp_bridge_device_create(struct mlxsw_sp_bridge *bridge, struct net_device *br_dev) -- cgit From 0b76aae741abb9d16d2c0e67f8b1e766576f897d Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Wed, 6 Dec 2017 02:26:29 +0530 Subject: e1000: fix disabling already-disabled warning This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by: Tushar Dave Tested-by: Fengguang Wu Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000.h | 3 ++- drivers/net/ethernet/intel/e1000/e1000_main.c | 27 ++++++++++++++++++++++----- 2 files changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index d7bdea79e9fa..8fd2458060a0 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -331,7 +331,8 @@ struct e1000_adapter { enum e1000_state_t { __E1000_TESTING, __E1000_RESETTING, - __E1000_DOWN + __E1000_DOWN, + __E1000_DISABLED }; #undef pr_fmt diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 1982f7917a8d..3dd4aeb2706d 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -945,7 +945,7 @@ static int e1000_init_hw_struct(struct e1000_adapter *adapter, static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; - struct e1000_adapter *adapter; + struct e1000_adapter *adapter = NULL; struct e1000_hw *hw; static int cards_found; @@ -955,6 +955,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u16 tmp = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; int bars, need_ioport; + bool disable_dev = false; /* do not allocate ioport bars when not needed */ need_ioport = e1000_is_need_ioport(pdev); @@ -1259,11 +1260,13 @@ err_mdio_ioremap: iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, bars); err_pci_reg: - pci_disable_device(pdev); + if (!adapter || disable_dev) + pci_disable_device(pdev); return err; } @@ -1281,6 +1284,7 @@ static void e1000_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + bool disable_dev; e1000_down_and_stop(adapter); e1000_release_manageability(adapter); @@ -1299,9 +1303,11 @@ static void e1000_remove(struct pci_dev *pdev) iounmap(hw->flash_address); pci_release_selected_regions(pdev, adapter->bars); + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); - pci_disable_device(pdev); + if (disable_dev) + pci_disable_device(pdev); } /** @@ -5156,7 +5162,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) if (netif_running(netdev)) e1000_free_irq(adapter); - pci_disable_device(pdev); + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); return 0; } @@ -5200,6 +5207,10 @@ static int e1000_resume(struct pci_dev *pdev) pr_err("Cannot enable PCI device from suspend\n"); return err; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); @@ -5274,7 +5285,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, if (netif_running(netdev)) e1000_down(adapter); - pci_disable_device(pdev); + + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); /* Request a slot slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -5302,6 +5315,10 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) pr_err("Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); -- cgit From 4110e02eb45ea447ec6f5459c9934de0a273fb91 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Mon, 11 Dec 2017 16:26:40 +0900 Subject: e1000e: Fix e1000_check_for_copper_link_ich8lan return value. e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan() are the two functions that may be assigned to mac.ops.check_for_link when phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed the meaning of the return value of check_for_link for copper media but only adjusted the first function. This patch adjusts the second function likewise. Reported-by: Christian Hesse Reported-by: Gabriel C Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier Tested-by: Aaron Brown Tested-by: Christian Hesse Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d6d4ed7acf03..31277d3bb7dc 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1367,6 +1367,9 @@ out: * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. + * + * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link + * up). **/ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { @@ -1382,7 +1385,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 0; + return 1; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) + if (ret_val) { e_dbg("Error configuring flow control\n"); + return ret_val; + } - return ret_val; + return 1; } static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) -- cgit From 64e711ca59ef9b7873d77ef06bc174aa01af9115 Mon Sep 17 00:00:00 2001 From: Amritha Nambiar Date: Fri, 17 Nov 2017 15:51:47 -0800 Subject: i40e: Remove UDP support for big buffer Since UDP based filters are not supported via big buffer cloud filters, remove UDP support. Also change a few return types to indicate unsupported vs invalid configuration. Signed-off-by: Amritha Nambiar Acked-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 321d8be80871..fffd4868defb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -6038,8 +6038,8 @@ static int i40e_validate_and_set_switch_mode(struct i40e_vsi *vsi) /* Set Bit 7 to be valid */ mode = I40E_AQ_SET_SWITCH_BIT7_VALID; - /* Set L4type to both TCP and UDP support */ - mode |= I40E_AQ_SET_SWITCH_L4_TYPE_BOTH; + /* Set L4type for TCP support */ + mode |= I40E_AQ_SET_SWITCH_L4_TYPE_TCP; /* Set cloud filter mode */ mode |= I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL; @@ -6969,18 +6969,18 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, is_valid_ether_addr(filter->src_mac)) || (is_multicast_ether_addr(filter->dst_mac) && is_multicast_ether_addr(filter->src_mac))) - return -EINVAL; + return -EOPNOTSUPP; - /* Make sure port is specified, otherwise bail out, for channel - * specific cloud filter needs 'L4 port' to be non-zero + /* Big buffer cloud filter needs 'L4 port' to be non-zero. Also, UDP + * ports are not supported via big buffer now. */ - if (!filter->dst_port) - return -EINVAL; + if (!filter->dst_port || filter->ip_proto == IPPROTO_UDP) + return -EOPNOTSUPP; /* adding filter using src_port/src_ip is not supported at this stage */ if (filter->src_port || filter->src_ipv4 || !ipv6_addr_any(&filter->ip.v6.src_ip6)) - return -EINVAL; + return -EOPNOTSUPP; /* copy element needed to add cloud filter from filter */ i40e_set_cld_element(filter, &cld_filter.element); @@ -6991,7 +6991,7 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, is_multicast_ether_addr(filter->src_mac)) { /* MAC + IP : unsupported mode */ if (filter->dst_ipv4) - return -EINVAL; + return -EOPNOTSUPP; /* since we validated that L4 port must be valid before * we get here, start with respective "flags" value -- cgit From e90f686b4358d7d7e5dbaa48b8e78c9a4e41826e Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Wed, 3 Jan 2018 10:39:29 +0800 Subject: net: fec: restore dev_id in the cases of probe error The static variable dev_id always plus one before netdev registerred. It should restore the dev_id value in the cases of probe error. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 8184d2fca9be..6a4fc2b35488 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3556,6 +3556,7 @@ failed_phy: of_node_put(phy_node); failed_ioremap: free_netdev(ndev); + dev_id--; return ret; } -- cgit From 3f38c683033a9a0a2738e7067f449deefabfa3ef Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Wed, 3 Jan 2018 10:39:30 +0800 Subject: net: fec: defer probe if regulator is not ready Defer probe if regulator is not ready. E.g. some regulator is fixed regulator controlled by i2c expander gpio, the i2c device may be probed after the driver, then it should handle the case of defer probe error. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 6a4fc2b35488..19f198e22e15 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3469,6 +3469,10 @@ fec_probe(struct platform_device *pdev) goto failed_regulator; } } else { + if (PTR_ERR(fep->reg_phy) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto failed_regulator; + } fep->reg_phy = NULL; } -- cgit From 248de22e638f10bd5bfc7624a357f940f66ba137 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 8 Dec 2017 10:55:04 -0800 Subject: i40e/i40evf: Account for frags split over multiple descriptors in check linearize The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang. This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K. Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 +++++++++++++++++++++++--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 +++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 4566d66ffc7c..5bc2748ac468 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -3047,10 +3047,30 @@ bool __i40e_chk_linearize(struct sk_buff *skb) /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -3058,7 +3078,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb) if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 50864f99446d..1ba29bb85b67 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -2012,10 +2012,30 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -2023,7 +2043,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; -- cgit From 458867b2ca0c987445c5d9adccd1642970e1ba07 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 20 Dec 2017 11:04:36 -0500 Subject: i40e: don't remove netdev->dev_addr when syncing uc list In some circumstances, such as with bridging, it is possible that the stack will add a devices own MAC address to its unicast address list. If, later, the stack deletes this address, then the i40e driver will receive a request to remove this address. The driver stores its current MAC address as part of the MAC/VLAN hash array, since it is convenient and matches exactly how the hardware expects to be told which traffic to receive. This causes a problem, since for more devices, the MAC address is stored separately, and requests to delete a unicast address should not have the ability to remove the filter for the MAC address. Fix this by forcing a check on every address sync to ensure we do not remove the device address. There is a very narrow possibility of a race between .set_mac and .set_rx_mode, if we don't change netdev->dev_addr before updating our internal MAC list in .set_mac. This might be possible if .set_rx_mode is going to remove MAC "XYZ" from the list, at the same time as .set_mac changes our dev_addr to MAC "XYZ", we might possibly queue a delete, then an add in .set_mac, then queue a delete in .set_rx_mode's dev_uc_sync and then update netdev->dev_addr. We can avoid this by moving the copy into dev_addr prior to the changes to the MAC filter list. A similar race on the other side does not cause problems, as if we're changing our MAC form A to B, and we race with .set_rx_mode, it could queue a delete from A, we'd update our address, and allow the delete. This seems like a race, but in reality we're about to queue a delete of A anyways, so it would not cause any issues. A race in the initialization code is unlikely because the netdevice has not yet been fully initialized and the stack should not be adding or removing addresses yet. Note that we don't (yet) need similar code for the VF driver because it does not make use of __dev_uc_sync and __dev_mc_sync, but instead roles its own method for handling updates to the MAC/VLAN list, which already has code to protect against removal of the hardware address. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index fffd4868defb..9e4b78e447f8 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1573,11 +1573,18 @@ static int i40e_set_mac(struct net_device *netdev, void *p) else netdev_info(netdev, "set new mac address %pM\n", addr->sa_data); + /* Copy the address first, so that we avoid a possible race with + * .set_rx_mode(). If we copy after changing the address in the filter + * list, we might open ourselves to a narrow race window where + * .set_rx_mode could delete our dev_addr filter and prevent traffic + * from passing. + */ + ether_addr_copy(netdev->dev_addr, addr->sa_data); + spin_lock_bh(&vsi->mac_filter_hash_lock); i40e_del_mac_filter(vsi, netdev->dev_addr); i40e_add_mac_filter(vsi, addr->sa_data); spin_unlock_bh(&vsi->mac_filter_hash_lock); - ether_addr_copy(netdev->dev_addr, addr->sa_data); if (vsi->type == I40E_VSI_MAIN) { i40e_status ret; @@ -1923,6 +1930,14 @@ static int i40e_addr_unsync(struct net_device *netdev, const u8 *addr) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; + /* Under some circumstances, we might receive a request to delete + * our own device address from our uc list. Because we store the + * device address in the VSI's MAC/VLAN filter list, we need to ignore + * such requests and not delete our device address from this list. + */ + if (ether_addr_equal(addr, netdev->dev_addr)) + return 0; + i40e_del_mac_filter(vsi, addr); return 0; -- cgit From bc4244c6e33f96b48c4986ce4653df4673c6a08e Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 22 Dec 2017 12:45:16 +0100 Subject: i40e: flower: Fix return value for unsupported offload When filter configuration is not supported, drivers should return -EOPNOTSUPP so the core can react correctly. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Jiri Pirko Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 9e4b78e447f8..42dcaefc4c19 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7371,7 +7371,7 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi, if (tc < 0) { dev_err(&vsi->back->pdev->dev, "Invalid traffic class\n"); - return -EINVAL; + return -EOPNOTSUPP; } if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) || -- cgit From 15962a18284552b5ec58982ff60a5e92e0c5c92b Mon Sep 17 00:00:00 2001 From: Arjun Vynipadath Date: Wed, 3 Jan 2018 11:44:07 +0530 Subject: cxgb4: Fix FW flash errors commit 96ac18f14a5a ("cxgb4: Add support for new flash parts") removed initialization of adapter->params.sf_fw_start causing issues while flashing firmware to card. We no longer need sf_fw_start in adapter->params as we already have macros defined for FW flash addresses. Fixes: 96ac18f14a5a ("cxgb4: Add support for new flash parts") Signed-off-by: Arjun Vynipadath Signed-off-by: Casey Leedom Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 1 - drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 6f9fa6e3c42a..d8424ed16c33 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -344,7 +344,6 @@ struct adapter_params { unsigned int sf_size; /* serial flash size in bytes */ unsigned int sf_nsec; /* # of flash sectors */ - unsigned int sf_fw_start; /* start of FW image in flash */ unsigned int fw_vers; /* firmware version */ unsigned int bs_vers; /* bootstrap version */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index f63210f15579..375ef86a84da 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2844,8 +2844,6 @@ enum { SF_RD_DATA_FAST = 0xb, /* read flash */ SF_RD_ID = 0x9f, /* read ID */ SF_ERASE_SECTOR = 0xd8, /* erase sector */ - - FW_MAX_SIZE = 16 * SF_SEC_SIZE, }; /** @@ -3558,8 +3556,9 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) const __be32 *p = (const __be32 *)fw_data; const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data; unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; - unsigned int fw_img_start = adap->params.sf_fw_start; - unsigned int fw_start_sec = fw_img_start / sf_sec_size; + unsigned int fw_start_sec = FLASH_FW_START_SEC; + unsigned int fw_size = FLASH_FW_MAX_SIZE; + unsigned int fw_start = FLASH_FW_START; if (!size) { dev_err(adap->pdev_dev, "FW image has no data\n"); @@ -3575,9 +3574,9 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) "FW image size differs from size in FW header\n"); return -EINVAL; } - if (size > FW_MAX_SIZE) { + if (size > fw_size) { dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n", - FW_MAX_SIZE); + fw_size); return -EFBIG; } if (!t4_fw_matches_chip(adap, hdr)) @@ -3604,11 +3603,11 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) */ memcpy(first_page, fw_data, SF_PAGE_SIZE); ((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff); - ret = t4_write_flash(adap, fw_img_start, SF_PAGE_SIZE, first_page); + ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page); if (ret) goto out; - addr = fw_img_start; + addr = fw_start; for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { addr += SF_PAGE_SIZE; fw_data += SF_PAGE_SIZE; @@ -3618,7 +3617,7 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) } ret = t4_write_flash(adap, - fw_img_start + offsetof(struct fw_hdr, fw_ver), + fw_start + offsetof(struct fw_hdr, fw_ver), sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver); out: if (ret) -- cgit From 7853b49ce8e0ef6364d24512b287463841d71bd3 Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Wed, 3 Jan 2018 06:17:29 +0000 Subject: net: ena: unmask MSI-X only after device initialization is completed Under certain conditions MSI-X interrupt might arrive right after it was unmasked in ena_up(). There is a chance it would be processed by the driver before device ENA_FLAG_DEV_UP flag is set. In such a case the interrupt is ignored. ENA device operates in auto-masked mode, therefore ignoring interrupt leaves it masked for good. Moving unmask of interrupt to be the last step in ena_up(). Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 97c5a89a9cf7..6fb28fd43eb3 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1565,7 +1565,7 @@ static int ena_rss_configure(struct ena_adapter *adapter) static int ena_up_complete(struct ena_adapter *adapter) { - int rc, i; + int rc; rc = ena_rss_configure(adapter); if (rc) @@ -1584,17 +1584,6 @@ static int ena_up_complete(struct ena_adapter *adapter) ena_napi_enable_all(adapter); - /* Enable completion queues interrupt */ - for (i = 0; i < adapter->num_queues; i++) - ena_unmask_interrupt(&adapter->tx_ring[i], - &adapter->rx_ring[i]); - - /* schedule napi in case we had pending packets - * from the last time we disable napi - */ - for (i = 0; i < adapter->num_queues; i++) - napi_schedule(&adapter->ena_napi[i].napi); - return 0; } @@ -1731,7 +1720,7 @@ create_err: static int ena_up(struct ena_adapter *adapter) { - int rc; + int rc, i; netdev_dbg(adapter->netdev, "%s\n", __func__); @@ -1774,6 +1763,17 @@ static int ena_up(struct ena_adapter *adapter) set_bit(ENA_FLAG_DEV_UP, &adapter->flags); + /* Enable completion queues interrupt */ + for (i = 0; i < adapter->num_queues; i++) + ena_unmask_interrupt(&adapter->tx_ring[i], + &adapter->rx_ring[i]); + + /* schedule napi in case we had pending packets + * from the last time we disable napi + */ + for (i = 0; i < adapter->num_queues; i++) + napi_schedule(&adapter->ena_napi[i].napi); + return rc; err_up: -- cgit From ee4552aaf3fef5345199b8a82e40be7245b289fb Mon Sep 17 00:00:00 2001 From: Netanel Belgazal Date: Wed, 3 Jan 2018 06:17:30 +0000 Subject: net: ena: fix error handling in ena_down() sequence ENA admin command queue errors are not handled as part of ena_down(). As a result, in case of error admin queue transitions to non-running state and aborts all subsequent commands including those coming from ena_up(). Reset scheduled by the driver from the timer service context would not proceed due to sharing rtnl with ena_up()/ena_down() Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 6fb28fd43eb3..fbe21a817bd8 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -75,6 +75,9 @@ static struct workqueue_struct *ena_wq; MODULE_DEVICE_TABLE(pci, ena_pci_tbl); static int ena_rss_init_default(struct ena_adapter *adapter); +static void check_for_admin_com_state(struct ena_adapter *adapter); +static void ena_destroy_device(struct ena_adapter *adapter); +static int ena_restore_device(struct ena_adapter *adapter); static void ena_tx_timeout(struct net_device *dev) { @@ -1884,6 +1887,17 @@ static int ena_close(struct net_device *netdev) if (test_bit(ENA_FLAG_DEV_UP, &adapter->flags)) ena_down(adapter); + /* Check for device status and issue reset if needed*/ + check_for_admin_com_state(adapter); + if (unlikely(test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags))) { + netif_err(adapter, ifdown, adapter->netdev, + "Destroy failure, restarting device\n"); + ena_dump_stats_to_dmesg(adapter); + /* rtnl lock already obtained in dev_ioctl() layer */ + ena_destroy_device(adapter); + ena_restore_device(adapter); + } + return 0; } @@ -2544,11 +2558,12 @@ static void ena_destroy_device(struct ena_adapter *adapter) ena_com_set_admin_running_state(ena_dev, false); - ena_close(netdev); + if (test_bit(ENA_FLAG_DEV_UP, &adapter->flags)) + ena_down(adapter); /* Before releasing the ENA resources, a device reset is required. * (to prevent the device from accessing them). - * In case the reset flag is set and the device is up, ena_close + * In case the reset flag is set and the device is up, ena_down() * already perform the reset, so it can be skipped. */ if (!(test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags) && dev_up)) -- cgit From ee4aa8df70fa6d76bd776c025dc0d8d746c18317 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 3 Jan 2018 13:09:23 -0500 Subject: 3c59x: fix missing dma_mapping_error check and bad ring refill logic A few spots in 3c59x missed calls to dma_mapping_error checks, casuing WARN_ONS to trigger. Clean those up. While we're at it, refactor the refill code a bit so that if skb allocation or dma mapping fails, we recycle the existing buffer. This prevents holes in the rx ring, and makes for much simpler logic Note: This is compile only tested. Ted, if you could run this and confirm that it continues to work properly, I would appreciate it, as I currently don't have access to this hardware Signed-off-by: Neil Horman CC: Steffen Klassert CC: "David S. Miller" Reported-by: tedheadster@gmail.com Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/3c59x.c | 90 +++++++++++++++++---------------------- 1 file changed, 38 insertions(+), 52 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index f4e13a7014bd..36c8950dbd2d 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -602,7 +602,7 @@ struct vortex_private { struct sk_buff* rx_skbuff[RX_RING_SIZE]; struct sk_buff* tx_skbuff[TX_RING_SIZE]; unsigned int cur_rx, cur_tx; /* The next free ring entry */ - unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ + unsigned int dirty_tx; /* The ring entries to be free()ed. */ struct vortex_extra_stats xstats; /* NIC-specific extra stats */ struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ dma_addr_t tx_skb_dma; /* Allocated DMA address for bus master ctrl DMA. */ @@ -618,7 +618,6 @@ struct vortex_private { /* The remainder are related to chip state, mostly media selection. */ struct timer_list timer; /* Media selection timer. */ - struct timer_list rx_oom_timer; /* Rx skb allocation retry timer */ int options; /* User-settable misc. driver options. */ unsigned int media_override:4, /* Passed-in media type. */ default_media:4, /* Read from the EEPROM/Wn3_Config. */ @@ -760,7 +759,6 @@ static void mdio_sync(struct vortex_private *vp, int bits); static int mdio_read(struct net_device *dev, int phy_id, int location); static void mdio_write(struct net_device *vp, int phy_id, int location, int value); static void vortex_timer(struct timer_list *t); -static void rx_oom_timer(struct timer_list *t); static netdev_tx_t vortex_start_xmit(struct sk_buff *skb, struct net_device *dev); static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb, @@ -1601,7 +1599,6 @@ vortex_up(struct net_device *dev) timer_setup(&vp->timer, vortex_timer, 0); mod_timer(&vp->timer, RUN_AT(media_tbl[dev->if_port].wait)); - timer_setup(&vp->rx_oom_timer, rx_oom_timer, 0); if (vortex_debug > 1) pr_debug("%s: Initial media type %s.\n", @@ -1676,7 +1673,7 @@ vortex_up(struct net_device *dev) window_write16(vp, 0x0040, 4, Wn4_NetDiag); if (vp->full_bus_master_rx) { /* Boomerang bus master. */ - vp->cur_rx = vp->dirty_rx = 0; + vp->cur_rx = 0; /* Initialize the RxEarly register as recommended. */ iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); iowrite32(0x0020, ioaddr + PktStatus); @@ -1729,6 +1726,7 @@ vortex_open(struct net_device *dev) struct vortex_private *vp = netdev_priv(dev); int i; int retval; + dma_addr_t dma; /* Use the now-standard shared IRQ implementation. */ if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ? @@ -1753,7 +1751,11 @@ vortex_open(struct net_device *dev) break; /* Bad news! */ skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */ - vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); + dma = pci_map_single(VORTEX_PCI(vp), skb->data, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma)) + break; + vp->rx_ring[i].addr = cpu_to_le32(dma); } if (i != RX_RING_SIZE) { pr_emerg("%s: no memory for rx ring\n", dev->name); @@ -2067,6 +2069,12 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) int len = (skb->len + 3) & ~3; vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, vp->tx_skb_dma)) { + dev_kfree_skb_any(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + spin_lock_irq(&vp->window_lock); window_set(vp, 7); iowrite32(vp->tx_skb_dma, ioaddr + Wn7_MasterAddr); @@ -2593,7 +2601,7 @@ boomerang_rx(struct net_device *dev) int entry = vp->cur_rx % RX_RING_SIZE; void __iomem *ioaddr = vp->ioaddr; int rx_status; - int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; + int rx_work_limit = RX_RING_SIZE; if (vortex_debug > 5) pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); @@ -2614,7 +2622,8 @@ boomerang_rx(struct net_device *dev) } else { /* The packet length: up to 4.5K!. */ int pkt_len = rx_status & 0x1fff; - struct sk_buff *skb; + struct sk_buff *skb, *newskb; + dma_addr_t newdma; dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr); if (vortex_debug > 4) @@ -2633,9 +2642,27 @@ boomerang_rx(struct net_device *dev) pci_dma_sync_single_for_device(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); vp->rx_copy++; } else { + /* Pre-allocate the replacement skb. If it or its + * mapping fails then recycle the buffer thats already + * in place + */ + newskb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ); + if (!newskb) { + dev->stats.rx_dropped++; + goto clear_complete; + } + newdma = pci_map_single(VORTEX_PCI(vp), newskb->data, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&VORTEX_PCI(vp)->dev, newdma)) { + dev->stats.rx_dropped++; + consume_skb(newskb); + goto clear_complete; + } + /* Pass up the skbuff already on the Rx ring. */ skb = vp->rx_skbuff[entry]; - vp->rx_skbuff[entry] = NULL; + vp->rx_skbuff[entry] = newskb; + vp->rx_ring[entry].addr = cpu_to_le32(newdma); skb_put(skb, pkt_len); pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); vp->rx_nocopy++; @@ -2653,55 +2680,15 @@ boomerang_rx(struct net_device *dev) netif_rx(skb); dev->stats.rx_packets++; } - entry = (++vp->cur_rx) % RX_RING_SIZE; - } - /* Refill the Rx ring buffers. */ - for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { - struct sk_buff *skb; - entry = vp->dirty_rx % RX_RING_SIZE; - if (vp->rx_skbuff[entry] == NULL) { - skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ); - if (skb == NULL) { - static unsigned long last_jif; - if (time_after(jiffies, last_jif + 10 * HZ)) { - pr_warn("%s: memory shortage\n", - dev->name); - last_jif = jiffies; - } - if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) - mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); - break; /* Bad news! */ - } - vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); - vp->rx_skbuff[entry] = skb; - } +clear_complete: vp->rx_ring[entry].status = 0; /* Clear complete bit. */ iowrite16(UpUnstall, ioaddr + EL3_CMD); + entry = (++vp->cur_rx) % RX_RING_SIZE; } return 0; } -/* - * If we've hit a total OOM refilling the Rx ring we poll once a second - * for some memory. Otherwise there is no way to restart the rx process. - */ -static void -rx_oom_timer(struct timer_list *t) -{ - struct vortex_private *vp = from_timer(vp, t, rx_oom_timer); - struct net_device *dev = vp->mii.dev; - - spin_lock_irq(&vp->lock); - if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */ - boomerang_rx(dev); - if (vortex_debug > 1) { - pr_debug("%s: rx_oom_timer %s\n", dev->name, - ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying"); - } - spin_unlock_irq(&vp->lock); -} - static void vortex_down(struct net_device *dev, int final_down) { @@ -2711,7 +2698,6 @@ vortex_down(struct net_device *dev, int final_down) netdev_reset_queue(dev); netif_stop_queue(dev); - del_timer_sync(&vp->rx_oom_timer); del_timer_sync(&vp->timer); /* Turn off statistics ASAP. We update dev->stats below. */ -- cgit From 879626e3a52630316d817cbda7cec9a5446d1d82 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 3 Jan 2018 16:46:29 +0100 Subject: net: stmmac: enable EEE in MII, GMII or RGMII only Note in the databook - Section 4.4 - EEE : " The EEE feature is not supported when the MAC is configured to use the TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC supports multiple PHY interfaces, you should activate the EEE mode only when the MAC is operating with GMII, MII, or RGMII interface." Applying this restriction solves a stability issue observed on Amlogic gxl platforms operating with RMII interface and the internal PHY. Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported") Signed-off-by: Jerome Brunet Tested-by: Arnaud Patard Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 337d53d12e94..c0af0bc4e714 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -364,9 +364,15 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t) bool stmmac_eee_init(struct stmmac_priv *priv) { struct net_device *ndev = priv->dev; + int interface = priv->plat->interface; unsigned long flags; bool ret = false; + if ((interface != PHY_INTERFACE_MODE_MII) && + (interface != PHY_INTERFACE_MODE_GMII) && + !phy_interface_mode_is_rgmii(interface)) + goto out; + /* Using PCS we cannot dial with the phy registers at this stage * so we do not support extra feature like EEE. */ -- cgit From dfe8266b8dd10e12a731c985b725fcf7f0e537f0 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 3 Jan 2018 20:09:49 +0300 Subject: sh_eth: fix TSU resource handling When switching the driver to the managed device API, I managed to break the case of a dual Ether devices sharing a single TSU: the 2nd Ether port wouldn't probe. Iwamatsu-san has tried to fix this but his patch was buggy and he then dropped the ball... The solution is to limit calling devm_request_mem_region() to the first of the two ports sharing the same TSU, so devm_ioremap_resource() can't be used anymore for the TSU resource... Fixes: d5e07e69218f ("sh_eth: use managed device API") Reported-by: Nobuhiro Iwamatsu Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 75323000c364..1bdd67a8a869 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3225,10 +3225,29 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* ioremap the TSU registers */ if (mdp->cd->tsu) { struct resource *rtsu; + rtsu = platform_get_resource(pdev, IORESOURCE_MEM, 1); - mdp->tsu_addr = devm_ioremap_resource(&pdev->dev, rtsu); - if (IS_ERR(mdp->tsu_addr)) { - ret = PTR_ERR(mdp->tsu_addr); + if (!rtsu) { + dev_err(&pdev->dev, "no TSU resource\n"); + ret = -ENODEV; + goto out_release; + } + /* We can only request the TSU region for the first port + * of the two sharing this TSU for the probe to succeed... + */ + if (devno % 2 == 0 && + !devm_request_mem_region(&pdev->dev, rtsu->start, + resource_size(rtsu), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, "can't request TSU resource.\n"); + ret = -EBUSY; + goto out_release; + } + mdp->tsu_addr = devm_ioremap(&pdev->dev, rtsu->start, + resource_size(rtsu)); + if (!mdp->tsu_addr) { + dev_err(&pdev->dev, "TSU region ioremap() failed.\n"); + ret = -ENOMEM; goto out_release; } mdp->port = devno % 2; -- cgit From d1616f07e8f1a4a490d1791316d4a68906b284aa Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Thu, 4 Jan 2018 10:47:20 +0800 Subject: net: fec: free/restore resource in related probe error pathes Fixes in probe error path: - Restore dev_id before failed_ioremap path. Fixes: ("net: fec: restore dev_id in the cases of probe error") - Call of_node_put(phy_node) before failed_phy path. Fixes: ("net: fec: Support phys probed from devicetree and fixed-link") Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 19f198e22e15..a74300a4459c 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3556,11 +3556,11 @@ failed_clk_ipg: failed_clk: if (of_phy_is_fixed_link(np)) of_phy_deregister_fixed_link(np); -failed_phy: of_node_put(phy_node); +failed_phy: + dev_id--; failed_ioremap: free_netdev(ndev); - dev_id--; return ret; } -- cgit From 5133550296d43236439494aa955bfb765a89f615 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 4 Jan 2018 21:06:49 +0300 Subject: sh_eth: fix SH7757 GEther initialization Renesas SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the 'sh_eth' driver can only reset and initialize TSU of the first controller pair. Shimoda-san tried to solve that adding the 'needs_init' member to the 'struct sh_eth_plat_data', however the platform code still never sets this flag. I think that we can infer this information from the 'devno' variable (set to 'platform_device::id') and reset/init the Ether controller pair only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be removed... Fixes: 150647fb2c31 ("net: sh_eth: change the condition of initialization") Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 1bdd67a8a869..f21c1db91c3f 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3254,8 +3254,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) ndev->features = NETIF_F_HW_VLAN_CTAG_FILTER; } - /* initialize first or needed device */ - if (!devno || pd->needs_init) { + /* Need to init only the first port of the two sharing a TSU */ + if (devno % 2 == 0) { if (mdp->cd->chip_reset) mdp->cd->chip_reset(ndev); -- cgit From 7deea450eb912f269d999de62c8ab922d1461748 Mon Sep 17 00:00:00 2001 From: Sunil Challa Date: Thu, 4 Jan 2018 18:46:54 -0500 Subject: bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc() flow_type in HWRM_FLOW_ALLOC is not being populated correctly due to incorrect passing of pointer and size of l3_mask argument of is_wildcard(). Fixed this. Fixes: db1d36a27324 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by: Sunil Challa Reviewed-by: Sathya Perla Reviewed-by: Venkat Duvvuru Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 3d201d7324bd..d8fee26cd45e 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -421,7 +421,7 @@ static int bnxt_hwrm_cfa_flow_alloc(struct bnxt *bp, struct bnxt_tc_flow *flow, } /* If all IP and L4 fields are wildcarded then this is an L2 flow */ - if (is_wildcard(&l3_mask, sizeof(l3_mask)) && + if (is_wildcard(l3_mask, sizeof(*l3_mask)) && is_wildcard(&flow->l4_mask, sizeof(flow->l4_mask))) { flow_flags |= CFA_FLOW_ALLOC_REQ_FLAGS_FLOWTYPE_L2; } else { -- cgit From 78f300049335ae81a5cc6b4b232481dc5e1f9d41 Mon Sep 17 00:00:00 2001 From: Venkat Duvvuru Date: Thu, 4 Jan 2018 18:46:55 -0500 Subject: bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Venkat Devvuru Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index 5ee18660bc33..c9617675f934 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -70,7 +70,7 @@ static int bnxt_vf_ndo_prep(struct bnxt *bp, int vf_id) netdev_err(bp->dev, "vf ndo called though sriov is disabled\n"); return -EINVAL; } - if (vf_id >= bp->pf.max_vfs) { + if (vf_id >= bp->pf.active_vfs) { netdev_err(bp->dev, "Invalid VF id %d\n", vf_id); return -EINVAL; } -- cgit From 50f3d740d376f664f6accc7e86c9afd8f1c7e1e4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jan 2018 00:26:47 +0300 Subject: sh_eth: fix TXALCR1 offsets The TXALCR1 offsets are incorrect in the register offset tables, most probably due to copy&paste error. Luckily, the driver never uses this register. :-) Fixes: 4a55530f38e4 ("net: sh_eth: modify the definitions of register") Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index f21c1db91c3f..b9e2846589f8 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -147,7 +147,7 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = { [FWNLCR0] = 0x0090, [FWALCR0] = 0x0094, [TXNLCR1] = 0x00a0, - [TXALCR1] = 0x00a0, + [TXALCR1] = 0x00a4, [RXNLCR1] = 0x00a8, [RXALCR1] = 0x00ac, [FWNLCR1] = 0x00b0, @@ -399,7 +399,7 @@ static const u16 sh_eth_offset_fast_sh3_sh2[SH_ETH_MAX_REGISTER_OFFSET] = { [FWNLCR0] = 0x0090, [FWALCR0] = 0x0094, [TXNLCR1] = 0x00a0, - [TXALCR1] = 0x00a0, + [TXALCR1] = 0x00a4, [RXNLCR1] = 0x00a8, [RXALCR1] = 0x00ac, [FWNLCR1] = 0x00b0, -- cgit From 11d827a993a969c3c6ec56758ff63a44ba19b466 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Tue, 9 Jan 2018 11:02:33 +0800 Subject: net: gianfar_ptp: move set_fipers() to spinlock protecting area set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu Acked-by: Richard Cochran Reviewed-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ptp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 544114281ea7..9f8d4f8e57e3 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -319,11 +319,10 @@ static int ptp_gianfar_adjtime(struct ptp_clock_info *ptp, s64 delta) now = tmr_cnt_read(etsects); now += delta; tmr_cnt_write(etsects, now); + set_fipers(etsects); spin_unlock_irqrestore(&etsects->lock, flags); - set_fipers(etsects); - return 0; } -- cgit From fc2336505fb49a8b932a0a67a9745c408b79992c Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 9 Jan 2018 18:14:28 -0800 Subject: nfp: always unmask aux interrupts at init The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 1a603fdd9e80..99b0487b6d82 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -568,6 +568,7 @@ nfp_net_aux_irq_request(struct nfp_net *nn, u32 ctrl_offset, return err; } nn_writeb(nn, ctrl_offset, entry->entry); + nfp_net_irq_unmask(nn, entry->entry); return 0; } @@ -582,6 +583,7 @@ static void nfp_net_aux_irq_free(struct nfp_net *nn, u32 ctrl_offset, unsigned int vector_idx) { nn_writeb(nn, ctrl_offset, 0xff); + nn_pci_flush(nn); free_irq(nn->irq_entries[vector_idx].vector, nn); } -- cgit From 8e033a93b37f37aa9fca71a370a895155320af60 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 10 Jan 2018 11:42:43 +0100 Subject: mlxsw: pci: Wait after reset before accessing HW After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/pci.c | 7 ++++++- drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index 23f7d828cf67..6ef20e5cc77d 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1643,7 +1643,12 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci, return 0; } - wmb(); /* reset needs to be written before we read control register */ + /* Reset needs to be written before we read control register, and + * we must wait for the HW to become responsive once again + */ + wmb(); + msleep(MLXSW_PCI_SW_RESET_WAIT_MSECS); + end = jiffies + msecs_to_jiffies(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS); do { u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY); diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h index a6441208e9d9..fb082ad21b00 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h +++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h @@ -59,6 +59,7 @@ #define MLXSW_PCI_SW_RESET 0xF0010 #define MLXSW_PCI_SW_RESET_RST_BIT BIT(0) #define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000 +#define MLXSW_PCI_SW_RESET_WAIT_MSECS 100 #define MLXSW_PCI_FW_READY 0xA1844 #define MLXSW_PCI_FW_READY_MASK 0xFFFF #define MLXSW_PCI_FW_READY_MAGIC 0x5E -- cgit From db84924c4fc3be1ef0c965d5ece5f6d785c77c5f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 10 Jan 2018 11:42:44 +0100 Subject: mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko Reviewed-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c index c33beac5def0..b5397da94d7f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c @@ -46,7 +46,8 @@ mlxsw_sp_tclass_congestion_enable(struct mlxsw_sp_port *mlxsw_sp_port, int tclass_num, u32 min, u32 max, u32 probability, bool is_ecn) { - char cwtp_cmd[max_t(u8, MLXSW_REG_CWTP_LEN, MLXSW_REG_CWTPM_LEN)]; + char cwtpm_cmd[MLXSW_REG_CWTPM_LEN]; + char cwtp_cmd[MLXSW_REG_CWTP_LEN]; struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; int err; @@ -60,10 +61,10 @@ mlxsw_sp_tclass_congestion_enable(struct mlxsw_sp_port *mlxsw_sp_port, if (err) return err; - mlxsw_reg_cwtpm_pack(cwtp_cmd, mlxsw_sp_port->local_port, tclass_num, + mlxsw_reg_cwtpm_pack(cwtpm_cmd, mlxsw_sp_port->local_port, tclass_num, MLXSW_REG_CWTP_DEFAULT_PROFILE, true, is_ecn); - return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(cwtpm), cwtp_cmd); + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(cwtpm), cwtpm_cmd); } static int -- cgit From 8978cc921fc7fad3f4d6f91f1da01352aeeeff25 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 9 Jan 2018 11:41:10 +0200 Subject: {net,ib}/mlx5: Don't disable local loopback multicast traffic when needed There are systems platform information management interfaces (such as HOST2BMC) for which we cannot disable local loopback multicast traffic. Separate disable_local_lb_mc and disable_local_lb_uc capability bits so driver will not disable multicast loopback traffic if not supported. (It is expected that Firmware will not set disable_local_lb_mc if HOST2BMC is running for example.) Function mlx5_nic_vport_update_local_lb will do best effort to disable/enable UC/MC loopback traffic and return success only in case it succeeded to changed all allowed by Firmware. Adapt mlx5_ib and mlx5e to support the new cap bits. Fixes: 2c43c5a036be ("net/mlx5e: Enable local loopback in loopback selftest") Fixes: c85023e153e3 ("IB/mlx5: Add raw ethernet local loopback support") Fixes: bded747bb432 ("net/mlx5: Add raw ethernet local loopback firmware command") Signed-off-by: Eran Ben Elisha Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en_selftest.c | 27 ++++++++++++++-------- drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 +-- drivers/net/ethernet/mellanox/mlx5/core/vport.c | 22 +++++++++++++----- 3 files changed, 35 insertions(+), 17 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c index 1f1f8af87d4d..5a4608281f38 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c @@ -238,15 +238,19 @@ static int mlx5e_test_loopback_setup(struct mlx5e_priv *priv, int err = 0; /* Temporarily enable local_lb */ - if (MLX5_CAP_GEN(priv->mdev, disable_local_lb)) { - mlx5_nic_vport_query_local_lb(priv->mdev, &lbtp->local_lb); - if (!lbtp->local_lb) - mlx5_nic_vport_update_local_lb(priv->mdev, true); + err = mlx5_nic_vport_query_local_lb(priv->mdev, &lbtp->local_lb); + if (err) + return err; + + if (!lbtp->local_lb) { + err = mlx5_nic_vport_update_local_lb(priv->mdev, true); + if (err) + return err; } err = mlx5e_refresh_tirs(priv, true); if (err) - return err; + goto out; lbtp->loopback_ok = false; init_completion(&lbtp->comp); @@ -256,16 +260,21 @@ static int mlx5e_test_loopback_setup(struct mlx5e_priv *priv, lbtp->pt.dev = priv->netdev; lbtp->pt.af_packet_priv = lbtp; dev_add_pack(&lbtp->pt); + + return 0; + +out: + if (!lbtp->local_lb) + mlx5_nic_vport_update_local_lb(priv->mdev, false); + return err; } static void mlx5e_test_loopback_cleanup(struct mlx5e_priv *priv, struct mlx5e_lbt_priv *lbtp) { - if (MLX5_CAP_GEN(priv->mdev, disable_local_lb)) { - if (!lbtp->local_lb) - mlx5_nic_vport_update_local_lb(priv->mdev, false); - } + if (!lbtp->local_lb) + mlx5_nic_vport_update_local_lb(priv->mdev, false); dev_remove_pack(&lbtp->pt); mlx5e_refresh_tirs(priv, false); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 8a89c7e8cd63..95e188d0883e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -578,8 +578,7 @@ static int mlx5_core_set_hca_defaults(struct mlx5_core_dev *dev) int ret = 0; /* Disable local_lb by default */ - if ((MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_ETH) && - MLX5_CAP_GEN(dev, disable_local_lb)) + if (MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_ETH) ret = mlx5_nic_vport_update_local_lb(dev, false); return ret; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c index d653b0025b13..a1296a62497d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c @@ -908,23 +908,33 @@ int mlx5_nic_vport_update_local_lb(struct mlx5_core_dev *mdev, bool enable) void *in; int err; - mlx5_core_dbg(mdev, "%s local_lb\n", enable ? "enable" : "disable"); + if (!MLX5_CAP_GEN(mdev, disable_local_lb_mc) && + !MLX5_CAP_GEN(mdev, disable_local_lb_uc)) + return 0; + in = kvzalloc(inlen, GFP_KERNEL); if (!in) return -ENOMEM; - MLX5_SET(modify_nic_vport_context_in, in, - field_select.disable_mc_local_lb, 1); MLX5_SET(modify_nic_vport_context_in, in, nic_vport_context.disable_mc_local_lb, !enable); - - MLX5_SET(modify_nic_vport_context_in, in, - field_select.disable_uc_local_lb, 1); MLX5_SET(modify_nic_vport_context_in, in, nic_vport_context.disable_uc_local_lb, !enable); + if (MLX5_CAP_GEN(mdev, disable_local_lb_mc)) + MLX5_SET(modify_nic_vport_context_in, in, + field_select.disable_mc_local_lb, 1); + + if (MLX5_CAP_GEN(mdev, disable_local_lb_uc)) + MLX5_SET(modify_nic_vport_context_in, in, + field_select.disable_uc_local_lb, 1); + err = mlx5_modify_nic_vport_context(mdev, in, inlen); + if (!err) + mlx5_core_dbg(mdev, "%s local_lb\n", + enable ? "enable" : "disable"); + kvfree(in); return err; } -- cgit From b6908c296021a99ba2a83a4b4703eb9e6365e5dc Mon Sep 17 00:00:00 2001 From: Alaa Hleihel Date: Thu, 14 Dec 2017 19:23:50 +0200 Subject: net/mlx5: Fix memory leak in bad flow of mlx5_alloc_irq_vectors Fix a memory leak where in case that pci_alloc_irq_vectors failed, priv->irq_info was not released. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Alaa Hleihel Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 95e188d0883e..a4c82fa71aec 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -319,6 +319,7 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) struct mlx5_eq_table *table = &priv->eq_table; int num_eqs = 1 << MLX5_CAP_GEN(dev, log_max_eq); int nvec; + int err; nvec = MLX5_CAP_GEN(dev, num_ports) * num_online_cpus() + MLX5_EQ_VEC_COMP_BASE; @@ -328,21 +329,23 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) priv->irq_info = kcalloc(nvec, sizeof(*priv->irq_info), GFP_KERNEL); if (!priv->irq_info) - goto err_free_msix; + return -ENOMEM; nvec = pci_alloc_irq_vectors(dev->pdev, MLX5_EQ_VEC_COMP_BASE + 1, nvec, PCI_IRQ_MSIX); - if (nvec < 0) - return nvec; + if (nvec < 0) { + err = nvec; + goto err_free_irq_info; + } table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE; return 0; -err_free_msix: +err_free_irq_info: kfree(priv->irq_info); - return -ENOMEM; + return err; } static void mlx5_free_irq_vectors(struct mlx5_core_dev *dev) -- cgit From 72f36be06138bdc11bdbe1f04e4a3e2637ea438d Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 20 Nov 2017 09:58:01 +0200 Subject: net/mlx5: Fix mlx5_get_uars_page to return error code Change mlx5_get_uars_page to return ERR_PTR in case of allocation failure. Change all callers accordingly to check the IS_ERR(ptr) instead of NULL. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Eran Ben Elisha Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 ++- drivers/net/ethernet/mellanox/mlx5/core/uar.c | 14 ++++++-------- 2 files changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index a4c82fa71aec..6dffa58fb178 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1135,8 +1135,9 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, } dev->priv.uar = mlx5_get_uars_page(dev); - if (!dev->priv.uar) { + if (IS_ERR(dev->priv.uar)) { dev_err(&pdev->dev, "Failed allocating uar, aborting\n"); + err = PTR_ERR(dev->priv.uar); goto err_disable_msix; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/uar.c b/drivers/net/ethernet/mellanox/mlx5/core/uar.c index 222b25908d01..8b97066dd1f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/uar.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/uar.c @@ -168,18 +168,16 @@ struct mlx5_uars_page *mlx5_get_uars_page(struct mlx5_core_dev *mdev) struct mlx5_uars_page *ret; mutex_lock(&mdev->priv.bfregs.reg_head.lock); - if (list_empty(&mdev->priv.bfregs.reg_head.list)) { - ret = alloc_uars_page(mdev, false); - if (IS_ERR(ret)) { - ret = NULL; - goto out; - } - list_add(&ret->list, &mdev->priv.bfregs.reg_head.list); - } else { + if (!list_empty(&mdev->priv.bfregs.reg_head.list)) { ret = list_first_entry(&mdev->priv.bfregs.reg_head.list, struct mlx5_uars_page, list); kref_get(&ret->ref_count); + goto out; } + ret = alloc_uars_page(mdev, false); + if (IS_ERR(ret)) + goto out; + list_add(&ret->list, &mdev->priv.bfregs.reg_head.list); out: mutex_unlock(&mdev->priv.bfregs.reg_head.lock); -- cgit From 259bbc575c5322e0bc675c9a77e937250723c333 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Sun, 31 Dec 2017 11:31:34 +0200 Subject: net/mlx5: Fix error handling in load one We didn't store the result of mlx5_init_once, due to that mlx5_load_one returned success on error. Fix that. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Maor Gottlieb Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 6dffa58fb178..0f88fd30a09a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1123,9 +1123,12 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, goto err_stop_poll; } - if (boot && mlx5_init_once(dev, priv)) { - dev_err(&pdev->dev, "sw objs init failed\n"); - goto err_stop_poll; + if (boot) { + err = mlx5_init_once(dev, priv); + if (err) { + dev_err(&pdev->dev, "sw objs init failed\n"); + goto err_stop_poll; + } } err = mlx5_alloc_irq_vectors(dev); -- cgit From e556f6dd47eda62cbb046fa92e03265245a1537f Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Tue, 26 Dec 2017 13:44:49 +0200 Subject: net/mlx5e: Keep updating ethtool statistics when the interface is down ethtool statistics should be updated even when the interface is down since it shows more than just netdev counters, which might change while the logical link is down. One useful use case, for example, is when running RoCE traffic over the interface (while the logical link is down, but physical link is up) and examining rx_prioX_bytes. Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 8f05efa5c829..ea5fff2c3143 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -207,8 +207,7 @@ void mlx5e_ethtool_get_ethtool_stats(struct mlx5e_priv *priv, return; mutex_lock(&priv->state_lock); - if (test_bit(MLX5E_STATE_OPENED, &priv->state)) - mlx5e_update_stats(priv, true); + mlx5e_update_stats(priv, true); mutex_unlock(&priv->state_lock); for (i = 0; i < mlx5e_num_stats_grps; i++) -- cgit From 97c8c3aa48ca8eb85d1806e08f882f90d78b1856 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 10 Oct 2017 16:51:44 +0300 Subject: net/mlx5e: Add error print in ETS init ETS initialization might fail, add a print to indicate such failures. Fixes: 08fb1dacdd76 ("net/mlx5e: Support DCBNL IEEE ETS") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 9bcf38f4123b..a5c5134f5cb2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -922,8 +922,9 @@ static void mlx5e_dcbnl_query_dcbx_mode(struct mlx5e_priv *priv, static void mlx5e_ets_init(struct mlx5e_priv *priv) { - int i; struct ieee_ets ets; + int err; + int i; if (!MLX5_CAP_GEN(priv->mdev, ets)) return; @@ -940,7 +941,10 @@ static void mlx5e_ets_init(struct mlx5e_priv *priv) ets.prio_tc[0] = 1; ets.prio_tc[1] = 0; - mlx5e_dcbnl_ieee_setets_core(priv, &ets); + err = mlx5e_dcbnl_ieee_setets_core(priv, &ets); + if (err) + netdev_err(priv->netdev, + "%s, Failed to init ETS: %d\n", __func__, err); } enum { -- cgit From 4b7d4363f14a0398eca48c7e96e46120c5eb6a96 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 10 Oct 2017 16:54:30 +0300 Subject: net/mlx5e: Check support before TC swap in ETS init Should not do the following swap between TCs 0 and 1 when max num of TCs is 1: tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) Fixes: 08fb1dacdd76 ("net/mlx5e: Support DCBNL IEEE ETS") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index a5c5134f5cb2..3d46ef48d5b8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -937,9 +937,11 @@ static void mlx5e_ets_init(struct mlx5e_priv *priv) ets.prio_tc[i] = i; } - /* tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) */ - ets.prio_tc[0] = 1; - ets.prio_tc[1] = 0; + if (ets.ets_cap > 1) { + /* tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) */ + ets.prio_tc[0] = 1; + ets.prio_tc[1] = 0; + } err = mlx5e_dcbnl_ieee_setets_core(priv, &ets); if (err) -- cgit From 75b81ce719b79565eb0b39aa9954b6e11a5e73bf Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 10 Jan 2018 17:11:11 +0200 Subject: net/mlx5e: Don't override netdev features field unless in error flow Set features function sets dev->features in order to keep track of which features were successfully changed and which weren't (in case the user asks for more than one change in a single command). This breaks the logic in __netdev_update_features which assumes that dev->features is not changed on success and checks for diffs between features and dev->features (diffs that might not exist at this point because of the driver override). The solution is to keep track of successful/failed feature changes and assign them to dev->features in case of failure only. Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 43 +++++++++++++---------- 1 file changed, 25 insertions(+), 18 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index d9d8227f195f..311d5ec8407c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3219,12 +3219,12 @@ static int mlx5e_set_mac(struct net_device *netdev, void *addr) return 0; } -#define MLX5E_SET_FEATURE(netdev, feature, enable) \ +#define MLX5E_SET_FEATURE(features, feature, enable) \ do { \ if (enable) \ - netdev->features |= feature; \ + *features |= feature; \ else \ - netdev->features &= ~feature; \ + *features &= ~feature; \ } while (0) typedef int (*mlx5e_feature_handler)(struct net_device *netdev, bool enable); @@ -3347,6 +3347,7 @@ static int set_feature_arfs(struct net_device *netdev, bool enable) #endif static int mlx5e_handle_feature(struct net_device *netdev, + netdev_features_t *features, netdev_features_t wanted_features, netdev_features_t feature, mlx5e_feature_handler feature_handler) @@ -3365,34 +3366,40 @@ static int mlx5e_handle_feature(struct net_device *netdev, return err; } - MLX5E_SET_FEATURE(netdev, feature, enable); + MLX5E_SET_FEATURE(features, feature, enable); return 0; } static int mlx5e_set_features(struct net_device *netdev, netdev_features_t features) { + netdev_features_t oper_features = netdev->features; int err; - err = mlx5e_handle_feature(netdev, features, NETIF_F_LRO, - set_feature_lro); - err |= mlx5e_handle_feature(netdev, features, + err = mlx5e_handle_feature(netdev, &oper_features, features, + NETIF_F_LRO, set_feature_lro); + err |= mlx5e_handle_feature(netdev, &oper_features, features, NETIF_F_HW_VLAN_CTAG_FILTER, set_feature_cvlan_filter); - err |= mlx5e_handle_feature(netdev, features, NETIF_F_HW_TC, - set_feature_tc_num_filters); - err |= mlx5e_handle_feature(netdev, features, NETIF_F_RXALL, - set_feature_rx_all); - err |= mlx5e_handle_feature(netdev, features, NETIF_F_RXFCS, - set_feature_rx_fcs); - err |= mlx5e_handle_feature(netdev, features, NETIF_F_HW_VLAN_CTAG_RX, - set_feature_rx_vlan); + err |= mlx5e_handle_feature(netdev, &oper_features, features, + NETIF_F_HW_TC, set_feature_tc_num_filters); + err |= mlx5e_handle_feature(netdev, &oper_features, features, + NETIF_F_RXALL, set_feature_rx_all); + err |= mlx5e_handle_feature(netdev, &oper_features, features, + NETIF_F_RXFCS, set_feature_rx_fcs); + err |= mlx5e_handle_feature(netdev, &oper_features, features, + NETIF_F_HW_VLAN_CTAG_RX, set_feature_rx_vlan); #ifdef CONFIG_RFS_ACCEL - err |= mlx5e_handle_feature(netdev, features, NETIF_F_NTUPLE, - set_feature_arfs); + err |= mlx5e_handle_feature(netdev, &oper_features, features, + NETIF_F_NTUPLE, set_feature_arfs); #endif - return err ? -EINVAL : 0; + if (err) { + netdev->features = oper_features; + return -EINVAL; + } + + return 0; } static netdev_features_t mlx5e_fix_features(struct net_device *netdev, -- cgit From afc98a0b46d8576a55f18092400cc518d03a79a1 Mon Sep 17 00:00:00 2001 From: Feras Daoud Date: Wed, 3 Jan 2018 17:23:55 +0200 Subject: net/mlx5: Update ptp_clock_event foreach PPS event PPS event did not update ptp_clock_event fields, therefore, timestamp value was not updated correctly. This fix updates the event source and the timestamp value for each PPS event. Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section") Signed-off-by: Feras Daoud Reported-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index fa8aed62b231..5701f125e99c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -423,9 +423,13 @@ void mlx5_pps_event(struct mlx5_core_dev *mdev, switch (clock->ptp_info.pin_config[pin].func) { case PTP_PF_EXTTS: + ptp_event.index = pin; + ptp_event.timestamp = timecounter_cyc2time(&clock->tc, + be64_to_cpu(eqe->data.pps.time_stamp)); if (clock->pps_info.enabled) { ptp_event.type = PTP_CLOCK_PPSUSR; - ptp_event.pps_times.ts_real = ns_to_timespec64(eqe->data.pps.time_stamp); + ptp_event.pps_times.ts_real = + ns_to_timespec64(ptp_event.timestamp); } else { ptp_event.type = PTP_CLOCK_EXTTS; } -- cgit From 237f258c42c905f71c694670fe4d9773d85c36ed Mon Sep 17 00:00:00 2001 From: Feras Daoud Date: Mon, 8 Jan 2018 10:01:04 +0200 Subject: net/mlx5e: Remove timestamp set from netdevice open flow To avoid configuration override, timestamp set call will be moved from the netdevice open flow to the init flow. By this, a close-open procedure will not override the timestamp configuration. In addition, the change will rename mlx5e_timestamp_set function to be mlx5e_timestamp_init. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Feras Daoud Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++-- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 543060c305a0..c2d89bfa1a70 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -895,7 +895,7 @@ int mlx5e_vlan_rx_kill_vid(struct net_device *dev, __always_unused __be16 proto, u16 vid); void mlx5e_enable_cvlan_filter(struct mlx5e_priv *priv); void mlx5e_disable_cvlan_filter(struct mlx5e_priv *priv); -void mlx5e_timestamp_set(struct mlx5e_priv *priv); +void mlx5e_timestamp_init(struct mlx5e_priv *priv); struct mlx5e_redirect_rqt_param { bool is_rss; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 311d5ec8407c..d8aefeed124d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2669,7 +2669,7 @@ void mlx5e_switch_priv_channels(struct mlx5e_priv *priv, netif_carrier_on(netdev); } -void mlx5e_timestamp_set(struct mlx5e_priv *priv) +void mlx5e_timestamp_init(struct mlx5e_priv *priv) { priv->tstamp.tx_type = HWTSTAMP_TX_OFF; priv->tstamp.rx_filter = HWTSTAMP_FILTER_NONE; @@ -2690,7 +2690,6 @@ int mlx5e_open_locked(struct net_device *netdev) mlx5e_activate_priv_channels(priv); if (priv->profile->update_carrier) priv->profile->update_carrier(priv); - mlx5e_timestamp_set(priv); if (priv->profile->update_stats) queue_delayed_work(priv->wq, &priv->update_stats_work, 0); @@ -4146,6 +4145,8 @@ static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev, INIT_WORK(&priv->set_rx_mode_work, mlx5e_set_rx_mode_work); INIT_WORK(&priv->tx_timeout_work, mlx5e_tx_timeout_work); INIT_DELAYED_WORK(&priv->update_stats_work, mlx5e_update_stats_work); + + mlx5e_timestamp_init(priv); } static void mlx5e_set_netdev_dev_addr(struct net_device *netdev) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 2c43606c26b5..3409d86eb06b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -877,6 +877,8 @@ static void mlx5e_init_rep(struct mlx5_core_dev *mdev, mlx5e_build_rep_params(mdev, &priv->channels.params); mlx5e_build_rep_netdev(netdev); + + mlx5e_timestamp_init(priv); } static int mlx5e_init_rep_rx(struct mlx5e_priv *priv) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 8812d7208e8f..ee2f378c5030 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -86,6 +86,8 @@ void mlx5i_init(struct mlx5_core_dev *mdev, mlx5e_build_nic_params(mdev, &priv->channels.params, profile->max_nch(mdev)); mlx5i_build_nic_params(mdev, &priv->channels.params); + mlx5e_timestamp_init(priv); + /* netdev init */ netdev->hw_features |= NETIF_F_SG; netdev->hw_features |= NETIF_F_IP_CSUM; @@ -450,7 +452,6 @@ static int mlx5i_open(struct net_device *netdev) mlx5e_refresh_tirs(epriv, false); mlx5e_activate_priv_channels(epriv); - mlx5e_timestamp_set(epriv); mutex_unlock(&epriv->state_lock); return 0; -- cgit From 6200b430220f3b9207861b16f57916950f4ecd8e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Jan 2018 17:30:22 +0100 Subject: net: cs89x0: add MODULE_LICENSE This driver lacks a MODULE_LICENSE tag, leading to a Kbuild warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/cirrus/cs89x0.o This adds license, author, and description according to the comment block at the start of the file. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/cirrus/cs89x0.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 410a0a95130b..b3e7fafee3df 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1913,3 +1913,7 @@ static struct platform_driver cs89x0_driver = { module_platform_driver_probe(cs89x0_driver, cs89x0_platform_probe); #endif /* CONFIG_CS89x0_PLATFORM */ + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Crystal Semiconductor (Now Cirrus Logic) CS89[02]0 network driver"); +MODULE_AUTHOR("Russell Nelson "); -- cgit From 17d0fb0caa68f2bfd8aaa8125ff15abebfbfa1d7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 13 Jan 2018 20:22:01 +0300 Subject: sh_eth: fix dumping ARSTR ARSTR is always located at the start of the TSU register region, thus using add_reg() instead of add_tsu_reg() in __sh_eth_get_regs() to dump it causes EDMR or EDSR (depending on the register layout) to be dumped instead of ARSTR. Use the correct condition/macro there... Fixes: 6b4b4fead342 ("sh_eth: Implement ethtool register dump operations") Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index b9e2846589f8..53924a4fc31c 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2089,8 +2089,8 @@ static size_t __sh_eth_get_regs(struct net_device *ndev, u32 *buf) add_reg(CSMR); if (cd->select_mii) add_reg(RMII_MII); - add_reg(ARSTR); if (cd->tsu) { + add_tsu_reg(ARSTR); add_tsu_reg(TSU_CTRST); add_tsu_reg(TSU_FWEN0); add_tsu_reg(TSU_FWEN1); -- cgit From 189e19e8cbb49f5bf483e55bdbd1e56d3d6bcf75 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 13 Jan 2018 17:37:13 -0500 Subject: nubus: Rename struct nubus_dev It is misleading to call a functional resource a "device". In adopting the Linux Driver Model, the struct device will be embedded in struct nubus_board. That will compound the terminlogy problem because drivers will bind with boards, not with functional resources. Avoid this by renaming struct nubus_dev as struct nubus_rsrc. "Functional resource" is the vendor's terminology so this helps avoid confusion. Cc: "David S. Miller" Cc: Bartlomiej Zolnierkiewicz Acked-by: Bartlomiej Zolnierkiewicz Tested-by: Stan Johnson Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/net/ethernet/8390/mac8390.c | 26 ++++++++++++++------------ drivers/net/ethernet/natsemi/macsonic.c | 22 +++++++++++----------- 2 files changed, 25 insertions(+), 23 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index 9497f18eaba0..929ff6419621 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -123,7 +123,8 @@ enum mac8390_access { }; extern int mac8390_memtest(struct net_device *dev); -static int mac8390_initdev(struct net_device *dev, struct nubus_dev *ndev, +static int mac8390_initdev(struct net_device *dev, + struct nubus_rsrc *ndev, enum mac8390_type type); static int mac8390_open(struct net_device *dev); @@ -169,11 +170,11 @@ static void word_memcpy_tocard(unsigned long tp, const void *fp, int count); static void word_memcpy_fromcard(void *tp, unsigned long fp, int count); static u32 mac8390_msg_enable; -static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) +static enum mac8390_type __init mac8390_ident(struct nubus_rsrc *fres) { - switch (dev->dr_sw) { + switch (fres->dr_sw) { case NUBUS_DRSW_3COM: - switch (dev->dr_hw) { + switch (fres->dr_hw) { case NUBUS_DRHW_APPLE_SONIC_NB: case NUBUS_DRHW_APPLE_SONIC_LC: case NUBUS_DRHW_SONNET: @@ -184,7 +185,7 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) break; case NUBUS_DRSW_APPLE: - switch (dev->dr_hw) { + switch (fres->dr_hw) { case NUBUS_DRHW_ASANTE_LC: return MAC8390_NONE; case NUBUS_DRHW_CABLETRON: @@ -201,7 +202,7 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) case NUBUS_DRSW_TECHWORKS: case NUBUS_DRSW_DAYNA2: case NUBUS_DRSW_DAYNA_LC: - if (dev->dr_hw == NUBUS_DRHW_CABLETRON) + if (fres->dr_hw == NUBUS_DRHW_CABLETRON) return MAC8390_CABLETRON; else return MAC8390_APPLE; @@ -212,7 +213,7 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) break; case NUBUS_DRSW_KINETICS: - switch (dev->dr_hw) { + switch (fres->dr_hw) { case NUBUS_DRHW_INTERLAN: return MAC8390_INTERLAN; default: @@ -225,8 +226,8 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) * These correspond to Dayna Sonic cards * which use the macsonic driver */ - if (dev->dr_hw == NUBUS_DRHW_SMC9194 || - dev->dr_hw == NUBUS_DRHW_INTERLAN) + if (fres->dr_hw == NUBUS_DRHW_SMC9194 || + fres->dr_hw == NUBUS_DRHW_INTERLAN) return MAC8390_NONE; else return MAC8390_DAYNA; @@ -289,7 +290,8 @@ static int __init mac8390_memsize(unsigned long membase) return i * 0x1000; } -static bool __init mac8390_init(struct net_device *dev, struct nubus_dev *ndev, +static bool __init mac8390_init(struct net_device *dev, + struct nubus_rsrc *ndev, enum mac8390_type cardtype) { struct nubus_dir dir; @@ -394,7 +396,7 @@ static bool __init mac8390_init(struct net_device *dev, struct nubus_dev *ndev, struct net_device * __init mac8390_probe(int unit) { struct net_device *dev; - struct nubus_dev *ndev = NULL; + struct nubus_rsrc *ndev = NULL; int err = -ENODEV; struct ei_device *ei_local; @@ -489,7 +491,7 @@ static const struct net_device_ops mac8390_netdev_ops = { }; static int __init mac8390_initdev(struct net_device *dev, - struct nubus_dev *ndev, + struct nubus_rsrc *ndev, enum mac8390_type type) { static u32 fwrd4_offsets[16] = { diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index a42433fb6949..14f3fb50dc21 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -428,26 +428,26 @@ static int mac_nubus_sonic_ethernet_addr(struct net_device *dev, return 0; } -static int macsonic_ident(struct nubus_dev *ndev) +static int macsonic_ident(struct nubus_rsrc *fres) { - if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC && - ndev->dr_sw == NUBUS_DRSW_SONIC_LC) + if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC && + fres->dr_sw == NUBUS_DRSW_SONIC_LC) return MACSONIC_DAYNALINK; - if (ndev->dr_hw == NUBUS_DRHW_SONIC && - ndev->dr_sw == NUBUS_DRSW_APPLE) { + if (fres->dr_hw == NUBUS_DRHW_SONIC && + fres->dr_sw == NUBUS_DRSW_APPLE) { /* There has to be a better way to do this... */ - if (strstr(ndev->board->name, "DuoDock")) + if (strstr(fres->board->name, "DuoDock")) return MACSONIC_DUODOCK; else return MACSONIC_APPLE; } - if (ndev->dr_hw == NUBUS_DRHW_SMC9194 && - ndev->dr_sw == NUBUS_DRSW_DAYNA) + if (fres->dr_hw == NUBUS_DRHW_SMC9194 && + fres->dr_sw == NUBUS_DRSW_DAYNA) return MACSONIC_DAYNA; - if (ndev->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC && - ndev->dr_sw == 0) { /* huh? */ + if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC && + fres->dr_sw == 0) { /* huh? */ return MACSONIC_APPLE16; } return -1; @@ -456,7 +456,7 @@ static int macsonic_ident(struct nubus_dev *ndev) static int mac_nubus_sonic_probe(struct net_device *dev) { static int slots; - struct nubus_dev* ndev = NULL; + struct nubus_rsrc *ndev = NULL; struct sonic_local* lp = netdev_priv(dev); unsigned long base_addr, prom_addr; u16 sonic_dcr; -- cgit From 41b848160eabb22957652936b66ccafd95ab5ad8 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 13 Jan 2018 17:37:13 -0500 Subject: nubus: Adopt standard linked list implementation This increases code re-use and improves readability. Cc: "David S. Miller" Cc: Bartlomiej Zolnierkiewicz Acked-by: Bartlomiej Zolnierkiewicz Tested-by: Stan Johnson Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/net/ethernet/8390/mac8390.c | 7 +++++-- drivers/net/ethernet/cirrus/mac89x0.c | 6 ++++-- drivers/net/ethernet/natsemi/macsonic.c | 8 +++++--- 3 files changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index 929ff6419621..2f91ce8dc614 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -416,8 +416,11 @@ struct net_device * __init mac8390_probe(int unit) if (unit >= 0) sprintf(dev->name, "eth%d", unit); - while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, - ndev))) { + for_each_func_rsrc(ndev) { + if (ndev->category != NUBUS_CAT_NETWORK || + ndev->type != NUBUS_TYPE_ETHERNET) + continue; + /* Have we seen it already? */ if (slots & (1 << ndev->board->slot)) continue; diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c index f910f0f386d6..977d4c2c759d 100644 --- a/drivers/net/ethernet/cirrus/mac89x0.c +++ b/drivers/net/ethernet/cirrus/mac89x0.c @@ -187,6 +187,7 @@ struct net_device * __init mac89x0_probe(int unit) unsigned long ioaddr; unsigned short sig; int err = -ENODEV; + struct nubus_rsrc *fres; if (!MACH_IS_MAC) return ERR_PTR(-ENODEV); @@ -207,8 +208,9 @@ struct net_device * __init mac89x0_probe(int unit) /* We might have to parameterize this later */ slot = 0xE; /* Get out now if there's a real NuBus card in slot E */ - if (nubus_find_slot(slot, NULL) != NULL) - goto out; + for_each_func_rsrc(fres) + if (fres->board->slot == slot) + goto out; /* The pseudo-ISA bits always live at offset 0x300 (gee, wonder why...) */ diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index 14f3fb50dc21..313fe5e0184b 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -464,9 +464,11 @@ static int mac_nubus_sonic_probe(struct net_device *dev) int reg_offset, dma_bitmode; /* Find the first SONIC that hasn't been initialized already */ - while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, - NUBUS_TYPE_ETHERNET, ndev)) != NULL) - { + for_each_func_rsrc(ndev) { + if (ndev->category != NUBUS_CAT_NETWORK || + ndev->type != NUBUS_TYPE_ETHERNET) + continue; + /* Have we seen it already? */ if (slots & (1<board->slot)) continue; -- cgit From b87eaec27eca3def6c8ed617e3b1bac08d7bc715 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 13 Jan 2018 17:37:13 -0500 Subject: nubus: Add expansion_type values for various Mac models Add an expansion slot attribute to allow drivers to properly handle cards like Comm Slot cards and PDS cards without declaration ROMs. This clarifies the logic for the Centris 610 model which has no Comm Slot but has an optional on-board SONIC device. Cc: "David S. Miller" Tested-by: Stan Johnson Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/net/ethernet/natsemi/macsonic.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index 313fe5e0184b..b922ab5cedea 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -311,7 +311,7 @@ static int mac_onboard_sonic_probe(struct net_device *dev) { struct sonic_local* lp = netdev_priv(dev); int sr; - int commslot = 0; + bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM; if (!MACH_IS_MAC) return -ENODEV; @@ -322,10 +322,7 @@ static int mac_onboard_sonic_probe(struct net_device *dev) Ethernet (BTW, the Ethernet *is* always at the same address, and nothing else lives there, at least if Apple's documentation is to be believed) */ - if (macintosh_config->ident == MAC_MODEL_Q630 || - macintosh_config->ident == MAC_MODEL_P588 || - macintosh_config->ident == MAC_MODEL_P575 || - macintosh_config->ident == MAC_MODEL_C610) { + if (commslot || macintosh_config->ident == MAC_MODEL_C610) { int card_present; card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); @@ -333,7 +330,6 @@ static int mac_onboard_sonic_probe(struct net_device *dev) printk("none.\n"); return -ENODEV; } - commslot = 1; } printk("yes\n"); -- cgit From 3d1661304f0b2b51a8a43785b764822611dbdd53 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 10 Jan 2018 19:39:52 -0600 Subject: ibmvnic: Fix pending MAC address changes Due to architecture limitations, the IBM VNIC client driver is unable to perform MAC address changes unless the device has "logged in" to its backing device. Currently, pending MAC changes are handled before login, resulting in an error and failure to change the MAC address. Moving that chunk to the end of the ibmvnic_login function, when we are sure that it was successful, fixes that. The MAC address can be changed when the device is up or down, so only check if the device is in a "PROBED" state before setting the MAC address. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Thomas Falcon Reviewed-by: John Allen Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 1dc4aef37d3a..4b3df17c7a45 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -756,6 +756,12 @@ static int ibmvnic_login(struct net_device *netdev) } } while (adapter->renegotiate); + /* handle pending MAC address changes after successful login */ + if (adapter->mac_change_pending) { + __ibmvnic_set_mac(netdev, &adapter->desired.mac); + adapter->mac_change_pending = false; + } + return 0; } @@ -993,11 +999,6 @@ static int ibmvnic_open(struct net_device *netdev) mutex_lock(&adapter->reset_lock); - if (adapter->mac_change_pending) { - __ibmvnic_set_mac(netdev, &adapter->desired.mac); - adapter->mac_change_pending = false; - } - if (adapter->state != VNIC_CLOSED) { rc = ibmvnic_login(netdev); if (rc) { @@ -1527,7 +1528,7 @@ static int ibmvnic_set_mac(struct net_device *netdev, void *p) struct ibmvnic_adapter *adapter = netdev_priv(netdev); struct sockaddr *addr = p; - if (adapter->state != VNIC_OPEN) { + if (adapter->state == VNIC_PROBED) { memcpy(&adapter->desired.mac, addr, sizeof(struct sockaddr)); adapter->mac_change_pending = true; return 0; -- cgit From 0d9c9f0f40ca262b67fc06a702b85f3976f5e1a1 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 15 Jan 2018 11:47:53 -0800 Subject: nfp: use the correct index for link speed table sts variable is holding link speed as well as state. We should be using ls to index into ls_to_ethtool. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c index 2801ecd09eab..6c02b2d6ba06 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c @@ -333,7 +333,7 @@ nfp_net_get_link_ksettings(struct net_device *netdev, ls >= ARRAY_SIZE(ls_to_ethtool)) return 0; - cmd->base.speed = ls_to_ethtool[sts]; + cmd->base.speed = ls_to_ethtool[ls]; cmd->base.duplex = DUPLEX_FULL; return 0; -- cgit From 70eeff66c4696cee4076d6388b6bede5bd7ff71c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 15 Jan 2018 12:24:49 -0800 Subject: qed: Fix potential use-after-free in qed_spq_post() We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK, but if it isn't then qed_spq_add_entry() might kfree(p_ent). Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index be48d9abd001..3588081b2e27 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -776,6 +776,7 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, int rc = 0; struct qed_spq *p_spq = p_hwfn ? p_hwfn->p_spq : NULL; bool b_ret_ent = true; + bool eblock; if (!p_hwfn) return -EINVAL; @@ -794,6 +795,11 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, if (rc) goto spq_post_fail; + /* Check if entry is in block mode before qed_spq_add_entry, + * which might kfree p_ent. + */ + eblock = (p_ent->comp_mode == QED_SPQ_MODE_EBLOCK); + /* Add the request to the pending queue */ rc = qed_spq_add_entry(p_hwfn, p_ent, p_ent->priority); if (rc) @@ -811,7 +817,7 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, spin_unlock_bh(&p_spq->lock); - if (p_ent->comp_mode == QED_SPQ_MODE_EBLOCK) { + if (eblock) { /* For entries in QED BLOCK mode, the completion code cannot * perform the necessary cleanup - if it did, we couldn't * access p_ent here to see whether it's successful or not. -- cgit From f8b39039cbf2a15f2b8c9f081e1cbd5dee00aaf5 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Tue, 16 Jan 2018 10:33:05 +0100 Subject: net: fs_enet: do not call phy_stop() in interrupts In case of TX timeout, fs_timeout() calls phy_stop(), which triggers the following BUG_ON() as we are in interrupt. [92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482! [92708.204985] Oops: Exception in kernel mode, sig: 5 [#1] [92708.210119] PREEMPT [92708.212107] CMPC885 [92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 #39 [92708.223227] task: c60f0a40 task.stack: c6104000 [92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8 [92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61) [92708.241193] MSR: 00021032 [92708.244818] CR: 24000822 XER: 20000000 [92708.248767] GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688 GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4 GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000 GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00 NIP [c02a84bc] mdiobus_read+0x20/0x74 [92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.286547] Call Trace: [92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable) [92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c [92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110 [92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0 [92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c [92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4 [92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4 [92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40 [92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258 [92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0 [92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64 [92708.354275] Instruction dump: [92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018 [92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008 [92708.372711] ---[ end trace 42b05441616fafd7 ]--- This patch moves fs_timeout() actions into an async worker. Fixes: commit 48257c4f168e5 ("Add fs_enet ethernet network driver, for several embedded platforms") Signed-off-by: Christophe Leroy Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c | 16 +++++++++++++--- drivers/net/ethernet/freescale/fs_enet/fs_enet.h | 1 + 2 files changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c index 7892f2f0c6b5..2c2976a2dda6 100644 --- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c +++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c @@ -613,9 +613,11 @@ static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } -static void fs_timeout(struct net_device *dev) +static void fs_timeout_work(struct work_struct *work) { - struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_private *fep = container_of(work, struct fs_enet_private, + timeout_work); + struct net_device *dev = fep->ndev; unsigned long flags; int wake = 0; @@ -627,7 +629,6 @@ static void fs_timeout(struct net_device *dev) phy_stop(dev->phydev); (*fep->ops->stop)(dev); (*fep->ops->restart)(dev); - phy_start(dev->phydev); } phy_start(dev->phydev); @@ -639,6 +640,13 @@ static void fs_timeout(struct net_device *dev) netif_wake_queue(dev); } +static void fs_timeout(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + schedule_work(&fep->timeout_work); +} + /*----------------------------------------------------------------------------- * generic link-change handler - should be sufficient for most cases *-----------------------------------------------------------------------------*/ @@ -759,6 +767,7 @@ static int fs_enet_close(struct net_device *dev) netif_stop_queue(dev); netif_carrier_off(dev); napi_disable(&fep->napi); + cancel_work_sync(&fep->timeout_work); phy_stop(dev->phydev); spin_lock_irqsave(&fep->lock, flags); @@ -1019,6 +1028,7 @@ static int fs_enet_probe(struct platform_device *ofdev) ndev->netdev_ops = &fs_enet_netdev_ops; ndev->watchdog_timeo = 2 * HZ; + INIT_WORK(&fep->timeout_work, fs_timeout_work); netif_napi_add(ndev, &fep->napi, fs_enet_napi, fpi->napi_weight); ndev->ethtool_ops = &fs_ethtool_ops; diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet.h b/drivers/net/ethernet/freescale/fs_enet/fs_enet.h index 92e06b37a199..195fae6aec4a 100644 --- a/drivers/net/ethernet/freescale/fs_enet/fs_enet.h +++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet.h @@ -125,6 +125,7 @@ struct fs_enet_private { spinlock_t lock; /* during all ops except TX pckt processing */ spinlock_t tx_lock; /* during fs_start_xmit and fs_tx */ struct fs_platform_info *fpi; + struct work_struct timeout_work; const struct fs_ops *ops; int rx_ring, tx_ring; dma_addr_t ring_mem_addr; -- cgit From 5a717843177c96ca3fe4565187de395afdb28092 Mon Sep 17 00:00:00 2001 From: Rex Chang Date: Tue, 16 Jan 2018 15:16:01 -0500 Subject: Net: ethernet: ti: netcp: Fix inbound ping crash if MTU size is greater than 1500 In the receive queue for 4096 bytes fragments, the page address set in the SW data0 field of the descriptor is not the one we got when doing the reassembly in receive. The page structure was retrieved from the wrong descriptor into SW data0 which is then causing a page fault when UDP checksum is accessing data above 1500. Signed-off-by: Rex Chang Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index ed58c746e4af..f5a7eb22d0f5 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -715,7 +715,7 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp) /* warning!!!! We are retrieving the virtual ptr in the sw_data * field as a 32bit value. Will not work on 64bit machines */ - page = (struct page *)GET_SW_DATA0(desc); + page = (struct page *)GET_SW_DATA0(ndesc); if (likely(dma_buff && buf_len && page)) { dma_unmap_page(netcp->dev, dma_buff, PAGE_SIZE, -- cgit From b200bfd6112a87283e58bcfcc4cb57a5517ae82f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 17 Jan 2018 07:57:32 -0800 Subject: fm10k: mark PM functions as __maybe_unused A cleanup of the PM code left an incorrect #ifdef in place, leading to a harmless build warning: drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function] drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function] It's easier to use __maybe_unused attributes here, since you can't pick the wrong one. Fixes: 8249c47c6ba4 ("fm10k: use generic PM hooks instead of legacy PCIe power hooks") Signed-off-by: Arnd Bergmann Acked-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 7f605221a686..a434fecfdfeb 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -2463,7 +2463,6 @@ static int fm10k_handle_resume(struct fm10k_intfc *interface) return err; } -#ifdef CONFIG_PM /** * fm10k_resume - Generic PM resume hook * @dev: generic device structure @@ -2472,7 +2471,7 @@ static int fm10k_handle_resume(struct fm10k_intfc *interface) * suspend or hibernation. This function does not need to handle lower PCIe * device state as the stack takes care of that for us. **/ -static int fm10k_resume(struct device *dev) +static int __maybe_unused fm10k_resume(struct device *dev) { struct fm10k_intfc *interface = pci_get_drvdata(to_pci_dev(dev)); struct net_device *netdev = interface->netdev; @@ -2499,7 +2498,7 @@ static int fm10k_resume(struct device *dev) * system suspend or hibernation. This function does not need to handle lower * PCIe device state as the stack takes care of that for us. **/ -static int fm10k_suspend(struct device *dev) +static int __maybe_unused fm10k_suspend(struct device *dev) { struct fm10k_intfc *interface = pci_get_drvdata(to_pci_dev(dev)); struct net_device *netdev = interface->netdev; @@ -2511,8 +2510,6 @@ static int fm10k_suspend(struct device *dev) return 0; } -#endif /* CONFIG_PM */ - /** * fm10k_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device @@ -2643,11 +2640,9 @@ static struct pci_driver fm10k_driver = { .id_table = fm10k_pci_tbl, .probe = fm10k_probe, .remove = fm10k_remove, -#ifdef CONFIG_PM .driver = { .pm = &fm10k_pm_ops, }, -#endif /* CONFIG_PM */ .sriov_configure = fm10k_iov_configure, .err_handler = &fm10k_err_handler }; -- cgit From ed604c5da34d96ae289c67c46dedd7dfd9fa795e Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 18 Jan 2018 15:42:10 +0100 Subject: mlxsw: spectrum_router: Free LPM tree upon failure When a new LPM tree is created, we try to replace the trees in the existing virtual routers with it. If we fail, the tree needs to be freed. Currently, this does not happen in the unlikely case where we fail to bind the tree to the first virtual router, since its reference count never transitions from 1 to 0. Fix that by taking a reference before binding the tree. Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 434b3922b34f..6c0391c13fe0 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -821,13 +821,18 @@ static int mlxsw_sp_vr_lpm_tree_replace(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_lpm_tree *old_tree = fib->lpm_tree; int err; - err = mlxsw_sp_vr_lpm_tree_bind(mlxsw_sp, fib, new_tree->id); - if (err) - return err; fib->lpm_tree = new_tree; mlxsw_sp_lpm_tree_hold(new_tree); + err = mlxsw_sp_vr_lpm_tree_bind(mlxsw_sp, fib, new_tree->id); + if (err) + goto err_tree_bind; mlxsw_sp_lpm_tree_put(mlxsw_sp, old_tree); return 0; + +err_tree_bind: + mlxsw_sp_lpm_tree_put(mlxsw_sp, new_tree); + fib->lpm_tree = old_tree; + return err; } static int mlxsw_sp_vrs_lpm_tree_replace(struct mlxsw_sp *mlxsw_sp, @@ -868,11 +873,14 @@ err_tree_replace: return err; no_replace: - err = mlxsw_sp_vr_lpm_tree_bind(mlxsw_sp, fib, new_tree->id); - if (err) - return err; fib->lpm_tree = new_tree; mlxsw_sp_lpm_tree_hold(new_tree); + err = mlxsw_sp_vr_lpm_tree_bind(mlxsw_sp, fib, new_tree->id); + if (err) { + mlxsw_sp_lpm_tree_put(mlxsw_sp, new_tree); + fib->lpm_tree = NULL; + return err; + } return 0; } -- cgit From f68979433deaa8a8a8b6396f944a0928a35713dc Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Thu, 18 Jan 2018 19:05:01 -0600 Subject: ibmvnic: Fix IP offload control buffer Set some missing fields in the IP control offload buffer. This buffer is used to enable checksum and TCP segmentation offload in the VNIC server. The buffer length field and the checksum offloading bits were not set properly, so fix that here. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 4b3df17c7a45..0a3a844f6473 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3346,7 +3346,11 @@ static void handle_query_ip_offload_rsp(struct ibmvnic_adapter *adapter) return; } + adapter->ip_offload_ctrl.len = + cpu_to_be32(sizeof(adapter->ip_offload_ctrl)); adapter->ip_offload_ctrl.version = cpu_to_be32(INITIAL_VERSION_IOB); + adapter->ip_offload_ctrl.ipv4_chksum = buf->ipv4_chksum; + adapter->ip_offload_ctrl.ipv6_chksum = buf->ipv6_chksum; adapter->ip_offload_ctrl.tcp_ipv4_chksum = buf->tcp_ipv4_chksum; adapter->ip_offload_ctrl.udp_ipv4_chksum = buf->udp_ipv4_chksum; adapter->ip_offload_ctrl.tcp_ipv6_chksum = buf->tcp_ipv6_chksum; -- cgit From a0dca10fce42ae82651edbe682b1c637a8ecd365 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Thu, 18 Jan 2018 19:29:48 -0600 Subject: ibmvnic: Fix IPv6 packet descriptors Packet descriptor generation for IPv6 is broken. Properly set L3 and L4 protocol flags for IPv6 descriptors. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 0a3a844f6473..ab2e1917cd04 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1276,6 +1276,7 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) unsigned char *dst; u64 *handle_array; int index = 0; + u8 proto = 0; int ret = 0; if (adapter->resetting) { @@ -1364,17 +1365,18 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) } if (skb->protocol == htons(ETH_P_IP)) { - if (ip_hdr(skb)->version == 4) - tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_IPV4; - else if (ip_hdr(skb)->version == 6) - tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_IPV6; - - if (ip_hdr(skb)->protocol == IPPROTO_TCP) - tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_TCP; - else if (ip_hdr(skb)->protocol != IPPROTO_TCP) - tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_UDP; + tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_IPV4; + proto = ip_hdr(skb)->protocol; + } else if (skb->protocol == htons(ETH_P_IPV6)) { + tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_IPV6; + proto = ipv6_hdr(skb)->nexthdr; } + if (proto == IPPROTO_TCP) + tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_TCP; + else if (proto == IPPROTO_UDP) + tx_crq.v1.flags1 |= IBMVNIC_TX_PROT_UDP; + if (skb->ip_summed == CHECKSUM_PARTIAL) { tx_crq.v1.flags1 |= IBMVNIC_TX_CHKSUM_OFFLOAD; hdrs += 2; -- cgit From e58edaa4863583b54409444f11b4f80dff0af1cd Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Sun, 21 Jan 2018 05:30:42 +0200 Subject: net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare Helmut reported a bug about division by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is division by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2fc48f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by: Helmut Grauer Signed-off-by: Talat Batheesh Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c index e401d9d245f3..b69a705fd787 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c @@ -201,9 +201,15 @@ static int mlx5e_am_stats_compare(struct mlx5e_rx_am_stats *curr, return (curr->bpms > prev->bpms) ? MLX5E_AM_STATS_BETTER : MLX5E_AM_STATS_WORSE; + if (!prev->ppms) + return curr->ppms ? MLX5E_AM_STATS_BETTER : + MLX5E_AM_STATS_SAME; + if (IS_SIGNIFICANT_DIFF(curr->ppms, prev->ppms)) return (curr->ppms > prev->ppms) ? MLX5E_AM_STATS_BETTER : MLX5E_AM_STATS_WORSE; + if (!prev->epms) + return MLX5E_AM_STATS_SAME; if (IS_SIGNIFICANT_DIFF(curr->epms, prev->epms)) return (curr->epms < prev->epms) ? MLX5E_AM_STATS_BETTER : -- cgit From d728f13102cd4b2afdbb183babde2b43ac2c3130 Mon Sep 17 00:00:00 2001 From: Kumar Sanghvi Date: Wed, 17 Jan 2018 12:13:33 +0530 Subject: cxgb4: set filter type to 1 for ETH_P_IPV6 For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower code when processing flow match parameters. Signed-off-by: Kumar Sanghvi Signed-off-by: Rahul Lakkireddy Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c index d4a548a6a55c..276edcbb3259 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c @@ -111,6 +111,9 @@ static void cxgb4_process_flow_match(struct net_device *dev, ethtype_mask = 0; } + if (ethtype_key == ETH_P_IPV6) + fs->type = 1; + fs->val.ethtype = ethtype_key; fs->mask.ethtype = ethtype_mask; fs->val.proto = key->ip_proto; -- cgit From 100d39af5048aecb00522a128ec264781ba7ecfa Mon Sep 17 00:00:00 2001 From: Kumar Sanghvi Date: Wed, 17 Jan 2018 12:13:34 +0530 Subject: cxgb4: fix endianness for vlan value in cxgb4_tc_flower Don't change endianness when assigning vlan value in cxgb4_tc_flower code when processing flow match parameters. The value gets converted to network order as part of filtering code in set_filter_wr. Signed-off-by: Kumar Sanghvi Signed-off-by: Rahul Lakkireddy Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c index 276edcbb3259..a452d5a1b0f3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c @@ -208,8 +208,8 @@ static void cxgb4_process_flow_match(struct net_device *dev, VLAN_PRIO_SHIFT); vlan_tci_mask = mask->vlan_id | (mask->vlan_priority << VLAN_PRIO_SHIFT); - fs->val.ivlan = cpu_to_be16(vlan_tci); - fs->mask.ivlan = cpu_to_be16(vlan_tci_mask); + fs->val.ivlan = vlan_tci; + fs->mask.ivlan = vlan_tci_mask; /* Chelsio adapters use ivlan_vld bit to match vlan packets * as 802.1Q. Also, when vlan tag is present in packets, -- cgit From 896d86959fee58113fc510c70cd8d10e82aa3e6a Mon Sep 17 00:00:00 2001 From: John Allen Date: Thu, 18 Jan 2018 16:26:31 -0600 Subject: ibmvnic: Modify buffer size and number of queues on failover Using newer backing devices can cause the required padding at the end of buffer as well as the number of queues to change after a failover. Since we currently assume that these values never change, after a failover to a backing device with different capabilities, we can get errors from the vnic server, attempt to free long term buffers that are no longer there, or not free long term buffers that should be freed. This patch resolves the issue by checking whether any of these values change, and if so perform the necessary re-allocations. Signed-off-by: John Allen Reviewed-by: Nathan Fontenot Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 45 ++++++++++++++++++++++++++++++++------ drivers/net/ethernet/ibm/ibmvnic.h | 2 ++ 2 files changed, 40 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index ab2e1917cd04..7f75d01432ef 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -410,6 +410,10 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter) struct ibmvnic_rx_pool *rx_pool; int rx_scrqs; int i, j, rc; + u64 *size_array; + + size_array = (u64 *)((u8 *)(adapter->login_rsp_buf) + + be32_to_cpu(adapter->login_rsp_buf->off_rxadd_buff_size)); rx_scrqs = be32_to_cpu(adapter->login_rsp_buf->num_rxadd_subcrqs); for (i = 0; i < rx_scrqs; i++) { @@ -417,7 +421,17 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter) netdev_dbg(adapter->netdev, "Re-setting rx_pool[%d]\n", i); - rc = reset_long_term_buff(adapter, &rx_pool->long_term_buff); + if (rx_pool->buff_size != be64_to_cpu(size_array[i])) { + free_long_term_buff(adapter, &rx_pool->long_term_buff); + rx_pool->buff_size = be64_to_cpu(size_array[i]); + alloc_long_term_buff(adapter, &rx_pool->long_term_buff, + rx_pool->size * + rx_pool->buff_size); + } else { + rc = reset_long_term_buff(adapter, + &rx_pool->long_term_buff); + } + if (rc) return rc; @@ -439,14 +453,12 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter) static void release_rx_pools(struct ibmvnic_adapter *adapter) { struct ibmvnic_rx_pool *rx_pool; - int rx_scrqs; int i, j; if (!adapter->rx_pool) return; - rx_scrqs = be32_to_cpu(adapter->login_rsp_buf->num_rxadd_subcrqs); - for (i = 0; i < rx_scrqs; i++) { + for (i = 0; i < adapter->num_active_rx_pools; i++) { rx_pool = &adapter->rx_pool[i]; netdev_dbg(adapter->netdev, "Releasing rx_pool[%d]\n", i); @@ -469,6 +481,7 @@ static void release_rx_pools(struct ibmvnic_adapter *adapter) kfree(adapter->rx_pool); adapter->rx_pool = NULL; + adapter->num_active_rx_pools = 0; } static int init_rx_pools(struct net_device *netdev) @@ -493,6 +506,8 @@ static int init_rx_pools(struct net_device *netdev) return -1; } + adapter->num_active_rx_pools = 0; + for (i = 0; i < rxadd_subcrqs; i++) { rx_pool = &adapter->rx_pool[i]; @@ -536,6 +551,8 @@ static int init_rx_pools(struct net_device *netdev) rx_pool->next_free = 0; } + adapter->num_active_rx_pools = rxadd_subcrqs; + return 0; } @@ -586,13 +603,12 @@ static void release_vpd_data(struct ibmvnic_adapter *adapter) static void release_tx_pools(struct ibmvnic_adapter *adapter) { struct ibmvnic_tx_pool *tx_pool; - int i, tx_scrqs; + int i; if (!adapter->tx_pool) return; - tx_scrqs = be32_to_cpu(adapter->login_rsp_buf->num_txsubm_subcrqs); - for (i = 0; i < tx_scrqs; i++) { + for (i = 0; i < adapter->num_active_tx_pools; i++) { netdev_dbg(adapter->netdev, "Releasing tx_pool[%d]\n", i); tx_pool = &adapter->tx_pool[i]; kfree(tx_pool->tx_buff); @@ -603,6 +619,7 @@ static void release_tx_pools(struct ibmvnic_adapter *adapter) kfree(adapter->tx_pool); adapter->tx_pool = NULL; + adapter->num_active_tx_pools = 0; } static int init_tx_pools(struct net_device *netdev) @@ -619,6 +636,8 @@ static int init_tx_pools(struct net_device *netdev) if (!adapter->tx_pool) return -1; + adapter->num_active_tx_pools = 0; + for (i = 0; i < tx_subcrqs; i++) { tx_pool = &adapter->tx_pool[i]; @@ -666,6 +685,8 @@ static int init_tx_pools(struct net_device *netdev) tx_pool->producer_index = 0; } + adapter->num_active_tx_pools = tx_subcrqs; + return 0; } @@ -1548,6 +1569,7 @@ static int ibmvnic_set_mac(struct net_device *netdev, void *p) static int do_reset(struct ibmvnic_adapter *adapter, struct ibmvnic_rwi *rwi, u32 reset_state) { + u64 old_num_rx_queues, old_num_tx_queues; struct net_device *netdev = adapter->netdev; int i, rc; @@ -1557,6 +1579,9 @@ static int do_reset(struct ibmvnic_adapter *adapter, netif_carrier_off(netdev); adapter->reset_reason = rwi->reset_reason; + old_num_rx_queues = adapter->req_rx_queues; + old_num_tx_queues = adapter->req_tx_queues; + if (rwi->reset_reason == VNIC_RESET_MOBILITY) { rc = ibmvnic_reenable_crq_queue(adapter); if (rc) @@ -1601,6 +1626,12 @@ static int do_reset(struct ibmvnic_adapter *adapter, rc = init_resources(adapter); if (rc) return rc; + } else if (adapter->req_rx_queues != old_num_rx_queues || + adapter->req_tx_queues != old_num_tx_queues) { + release_rx_pools(adapter); + release_tx_pools(adapter); + init_rx_pools(netdev); + init_tx_pools(netdev); } else { rc = reset_tx_pools(adapter); if (rc) diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 4487f1e2c266..3aec42118db2 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -1091,6 +1091,8 @@ struct ibmvnic_adapter { u64 opt_rxba_entries_per_subcrq; __be64 tx_rx_desc_req; u8 map_id; + u64 num_active_rx_pools; + u64 num_active_tx_pools; struct tasklet_struct tasklet; enum vnic_state state; -- cgit From e791380340685698dbdd38c7e3f3fcbf70a3c832 Mon Sep 17 00:00:00 2001 From: John Allen Date: Thu, 18 Jan 2018 16:27:12 -0600 Subject: ibmvnic: Revert to previous mtu when unsupported value requested If we request an unsupported mtu value, the vnic server will suggest a different value. Currently we take the suggested value without question and login with that value. However, the behavior doesn't seem completely sane as attempting to change the mtu to some specific value will change the mtu to some completely different value most of the time. This patch fixes the issue by logging in with the previously used mtu value and printing an error message saying that the given mtu is unsupported. Signed-off-by: John Allen Reviewed-by: Nathan Fontenot Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 7f75d01432ef..cc36b254917c 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3623,7 +3623,17 @@ static void handle_request_cap_rsp(union ibmvnic_crq *crq, *req_value, (long int)be64_to_cpu(crq->request_capability_rsp. number), name); - *req_value = be64_to_cpu(crq->request_capability_rsp.number); + + if (be16_to_cpu(crq->request_capability_rsp.capability) == + REQ_MTU) { + pr_err("mtu of %llu is not supported. Reverting.\n", + *req_value); + *req_value = adapter->fallback.mtu; + } else { + *req_value = + be64_to_cpu(crq->request_capability_rsp.number); + } + ibmvnic_send_req_caps(adapter, 1); return; default: -- cgit From 69d08dcbbe34347cbc044629cf6f25d062593dfe Mon Sep 17 00:00:00 2001 From: John Allen Date: Thu, 18 Jan 2018 16:27:58 -0600 Subject: ibmvnic: Allocate and request vpd in init_resources In reset events in which our memory allocations need to be reallocated, VPD data is being freed, but never reallocated. This can cause issues if we later attempt to access that memory or reset and attempt to free the memory. This patch moves the allocation of the VPD data to init_resources so that it will be symmetrically freed during release resources. Signed-off-by: John Allen Reviewed-by: Nathan Fontenot Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index cc36b254917c..b65f5f3ac034 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -881,7 +881,7 @@ static int ibmvnic_get_vpd(struct ibmvnic_adapter *adapter) if (adapter->vpd->buff) len = adapter->vpd->len; - reinit_completion(&adapter->fw_done); + init_completion(&adapter->fw_done); crq.get_vpd_size.first = IBMVNIC_CRQ_CMD; crq.get_vpd_size.cmd = GET_VPD_SIZE; ibmvnic_send_crq(adapter, &crq); @@ -943,6 +943,13 @@ static int init_resources(struct ibmvnic_adapter *adapter) if (!adapter->vpd) return -ENOMEM; + /* Vital Product Data (VPD) */ + rc = ibmvnic_get_vpd(adapter); + if (rc) { + netdev_err(netdev, "failed to initialize Vital Product Data (VPD)\n"); + return rc; + } + adapter->map_id = 1; adapter->napi = kcalloc(adapter->req_rx_queues, sizeof(struct napi_struct), GFP_KERNEL); @@ -1016,7 +1023,7 @@ static int __ibmvnic_open(struct net_device *netdev) static int ibmvnic_open(struct net_device *netdev) { struct ibmvnic_adapter *adapter = netdev_priv(netdev); - int rc, vpd; + int rc; mutex_lock(&adapter->reset_lock); @@ -1039,11 +1046,6 @@ static int ibmvnic_open(struct net_device *netdev) rc = __ibmvnic_open(netdev); netif_carrier_on(netdev); - /* Vital Product Data (VPD) */ - vpd = ibmvnic_get_vpd(adapter); - if (vpd) - netdev_err(netdev, "failed to initialize Vital Product Data (VPD)\n"); - mutex_unlock(&adapter->reset_lock); return rc; -- cgit From 52acf06451930eb4cefabd5ecea56e2d46c32f76 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 19 Jan 2018 20:23:50 +0100 Subject: be2net: restore properly promisc mode after queues reconfiguration The commit 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index c6e859a27ee6..e180657a02ef 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4634,6 +4634,15 @@ int be_update_queues(struct be_adapter *adapter) be_schedule_worker(adapter); + /* + * The IF was destroyed and re-created. We need to clear + * all promiscuous flags valid for the destroyed IF. + * Without this promisc mode is not restored during + * be_open() because the driver thinks that it is + * already enabled in HW. + */ + adapter->if_flags &= ~BE_IF_FLAGS_ALL_PROMISCUOUS; + if (netif_running(netdev)) status = be_open(netdev); -- cgit From 1ecdaea02ca6bfacf2ecda500dc1af51e9780c42 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 24 Jan 2018 10:02:09 +0100 Subject: mlxsw: spectrum_router: Don't log an error on missing neighbor Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca11b9 ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by: Yuval Mintz Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 6c0391c13fe0..7042c855a5d6 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1942,11 +1942,8 @@ static void mlxsw_sp_router_neigh_ent_ipv4_process(struct mlxsw_sp *mlxsw_sp, dipn = htonl(dip); dev = mlxsw_sp->router->rifs[rif]->dev; n = neigh_lookup(&arp_tbl, &dipn, dev); - if (!n) { - netdev_err(dev, "Failed to find matching neighbour for IP=%pI4h\n", - &dip); + if (!n) return; - } netdev_dbg(dev, "Updating neighbour with IP=%pI4h\n", &dip); neigh_event_send(n, NULL); @@ -1973,11 +1970,8 @@ static void mlxsw_sp_router_neigh_ent_ipv6_process(struct mlxsw_sp *mlxsw_sp, dev = mlxsw_sp->router->rifs[rif]->dev; n = neigh_lookup(&nd_tbl, &dip, dev); - if (!n) { - netdev_err(dev, "Failed to find matching neighbour for IP=%pI6c\n", - &dip); + if (!n) return; - } netdev_dbg(dev, "Updating neighbour with IP=%pI6c\n", &dip); neigh_event_send(n, NULL); -- cgit From 4de49474b18936d62797d1dd451c6c4db1a7b119 Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Tue, 23 Jan 2018 11:33:46 +0200 Subject: qed: Remove reserveration of dpi for kernel Double reservation for kernel dedicated dpi was performed. Once in the core module and once in qedr. Remove the reservation from core. Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_rdma.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index c8c4b3940564..9d6e2d43d4de 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -615,9 +615,6 @@ static int qed_rdma_reserve_lkey(struct qed_hwfn *p_hwfn) { struct qed_rdma_device *dev = p_hwfn->p_rdma_info->dev; - /* The first DPI is reserved for the Kernel */ - __set_bit(0, p_hwfn->p_rdma_info->dpi_map.bitmap); - /* Tid 0 will be used as the key for "reserved MR". * The driver should allocate memory for it so it can be loaded but no * ramrod should be passed on it. -- cgit From 1fe280a056dff50774bd59c3e61187cf8c0ccf10 Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Tue, 23 Jan 2018 11:33:47 +0200 Subject: qed: Free reserved MR tid A tid was allocated for reserved MR during initialization but not freed. This lead to an annoying output message during rdma unload flow. Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_rdma.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index 9d6e2d43d4de..b7abb8205d3a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -358,10 +358,27 @@ static void qed_rdma_resc_free(struct qed_hwfn *p_hwfn) kfree(p_rdma_info); } +static void qed_rdma_free_tid(void *rdma_cxt, u32 itid) +{ + struct qed_hwfn *p_hwfn = (struct qed_hwfn *)rdma_cxt; + + DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "itid = %08x\n", itid); + + spin_lock_bh(&p_hwfn->p_rdma_info->lock); + qed_bmap_release_id(p_hwfn, &p_hwfn->p_rdma_info->tid_map, itid); + spin_unlock_bh(&p_hwfn->p_rdma_info->lock); +} + +static void qed_rdma_free_reserved_lkey(struct qed_hwfn *p_hwfn) +{ + qed_rdma_free_tid(p_hwfn, p_hwfn->p_rdma_info->dev->reserved_lkey); +} + static void qed_rdma_free(struct qed_hwfn *p_hwfn) { DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "Freeing RDMA\n"); + qed_rdma_free_reserved_lkey(p_hwfn); qed_rdma_resc_free(p_hwfn); } @@ -794,17 +811,6 @@ static struct qed_rdma_device *qed_rdma_query_device(void *rdma_cxt) return p_hwfn->p_rdma_info->dev; } -static void qed_rdma_free_tid(void *rdma_cxt, u32 itid) -{ - struct qed_hwfn *p_hwfn = (struct qed_hwfn *)rdma_cxt; - - DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "itid = %08x\n", itid); - - spin_lock_bh(&p_hwfn->p_rdma_info->lock); - qed_bmap_release_id(p_hwfn, &p_hwfn->p_rdma_info->tid_map, itid); - spin_unlock_bh(&p_hwfn->p_rdma_info->lock); -} - static void qed_rdma_cnq_prod_update(void *rdma_cxt, u8 qz_offset, u16 prod) { struct qed_hwfn *p_hwfn; -- cgit From b7051cb8dadd69f85da5989017af2bb35b418950 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 23 Jan 2018 00:08:40 -0800 Subject: i40e: flower: check if TC offload is enabled on a netdev Since TC block changes drivers are required to check if the TC hw offload flag is set on the interface themselves. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: 44ae12a768b7 ("net: sched: move the can_offload check from binding phase to rule insertion phase") Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Acked-by: Jiri Pirko Acked-by: Amritha Nambiar Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 42dcaefc4c19..af792112a2d3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7505,6 +7505,8 @@ static int i40e_setup_tc_cls_flower(struct i40e_netdev_priv *np, { struct i40e_vsi *vsi = np->vsi; + if (!tc_can_offload(vsi->netdev)) + return -EOPNOTSUPP; if (cls_flower->common.chain_index) return -EOPNOTSUPP; -- cgit From 45d6e545505fd32edb812f085be7de45b6a5c0af Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 24 Jan 2018 15:53:24 +0300 Subject: net/ibm/emac: add 8192 rx/tx fifo size emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes, in current state if we set it up in dts 8192 as example, we will get only 2048 which may impact on network speed. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 6 ++++++ drivers/net/ethernet/ibm/emac/emac.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 7feff2450ed6..241db3199b88 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -494,6 +494,9 @@ static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_s case 16384: ret |= EMAC_MR1_RFS_16K; break; + case 8192: + ret |= EMAC4_MR1_RFS_8K; + break; case 4096: ret |= EMAC_MR1_RFS_4K; break; @@ -516,6 +519,9 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_ case 16384: ret |= EMAC4_MR1_TFS_16K; break; + case 8192: + ret |= EMAC4_MR1_TFS_8K; + break; case 4096: ret |= EMAC4_MR1_TFS_4K; break; diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h index 5afcc27ceebb..d0a0e3b3f283 100644 --- a/drivers/net/ethernet/ibm/emac/emac.h +++ b/drivers/net/ethernet/ibm/emac/emac.h @@ -151,9 +151,11 @@ struct emac_regs { #define EMAC4_MR1_RFS_2K 0x00100000 #define EMAC4_MR1_RFS_4K 0x00180000 +#define EMAC4_MR1_RFS_8K 0x00200000 #define EMAC4_MR1_RFS_16K 0x00280000 #define EMAC4_MR1_TFS_2K 0x00020000 #define EMAC4_MR1_TFS_4K 0x00030000 +#define EMAC4_MR1_TFS_8K 0x00040000 #define EMAC4_MR1_TFS_16K 0x00050000 #define EMAC4_MR1_TR 0x00008000 #define EMAC4_MR1_MWSW_001 0x00001000 -- cgit From 624ca9c33c8a853a4a589836e310d776620f4ab9 Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 24 Jan 2018 15:53:25 +0300 Subject: net/ibm/emac: wrong bit is used for STA control register write STA control register has areas of mode and opcodes for opeations. 18 bit is using for mode selection, where 0 is old MIO/MDIO access method and 1 is indirect access mode. 19-20 bits are using for setting up read/write operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode with 19 bit and write operation is set into 18 bit which is mode selection, not a write operation. To correlate write with read we set it into 20 bit. All those bit operations are MSB 0 based. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/emac.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h index d0a0e3b3f283..c26d2631ca30 100644 --- a/drivers/net/ethernet/ibm/emac/emac.h +++ b/drivers/net/ethernet/ibm/emac/emac.h @@ -244,7 +244,7 @@ struct emac_regs { #define EMAC_STACR_PHYE 0x00004000 #define EMAC_STACR_STAC_MASK 0x00003000 #define EMAC_STACR_STAC_READ 0x00001000 -#define EMAC_STACR_STAC_WRITE 0x00002000 +#define EMAC_STACR_STAC_WRITE 0x00000800 #define EMAC_STACR_OPBC_MASK 0x00000C00 #define EMAC_STACR_OPBC_50 0x00000000 #define EMAC_STACR_OPBC_66 0x00000400 -- cgit From a78e93661c5fd30b9e1dee464b2f62f966883ef7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 26 Jan 2018 01:53:26 +0100 Subject: r8169: fix memory corruption on retrieval of hardware statistics. Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by: Francois Romieu Tested-by: Oliver Freyermuth Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index fc0d5fa65ad4..734286ebe5ef 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -2244,19 +2244,14 @@ static bool rtl8169_do_counters(struct net_device *dev, u32 counter_cmd) void __iomem *ioaddr = tp->mmio_addr; dma_addr_t paddr = tp->counters_phys_addr; u32 cmd; - bool ret; RTL_W32(CounterAddrHigh, (u64)paddr >> 32); + RTL_R32(CounterAddrHigh); cmd = (u64)paddr & DMA_BIT_MASK(32); RTL_W32(CounterAddrLow, cmd); RTL_W32(CounterAddrLow, cmd | counter_cmd); - ret = rtl_udelay_loop_wait_low(tp, &rtl_counters_cond, 10, 1000); - - RTL_W32(CounterAddrLow, 0); - RTL_W32(CounterAddrHigh, 0); - - return ret; + return rtl_udelay_loop_wait_low(tp, &rtl_counters_cond, 10, 1000); } static bool rtl8169_reset_counters(struct net_device *dev) -- cgit