From d0cfa548dbde354de986911d3913897b5448faad Mon Sep 17 00:00:00 2001 From: Lior Nahmanson Date: Sun, 30 Jan 2022 13:37:52 +0200 Subject: net: macsec: Verify that send_sci is on when setting Tx sci explicitly When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson Reviewed-by: Raed Salem Signed-off-by: Raed Salem Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/macsec.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/net/macsec.c') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 33ff33c05aab..3d0874331763 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -4018,6 +4018,15 @@ static int macsec_newlink(struct net *net, struct net_device *dev, !macsec_check_offload(macsec->offload, macsec)) return -EOPNOTSUPP; + /* send_sci must be set to true when transmit sci explicitly is set */ + if ((data && data[IFLA_MACSEC_SCI]) && + (data && data[IFLA_MACSEC_INC_SCI])) { + u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]); + + if (!send_sci) + return -EINVAL; + } + if (data && data[IFLA_MACSEC_ICV_LEN]) icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]); mtu = real_dev->mtu - icv_len - macsec_extra_len(true); -- cgit