From 23a890d493e3ec1e957bc925fabb120962ae90a7 Mon Sep 17 00:00:00 2001 From: Luo Jie Date: Thu, 12 Aug 2021 18:06:40 +0800 Subject: net: mdio: Add the reset function for IPQ MDIO driver 1. configure the MDIO clock source frequency. 2. the LDO resource is needed to configure the ethernet LDO available for CMN_PLL. Signed-off-by: Luo Jie Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/mdio/Kconfig | 1 + drivers/net/mdio/mdio-ipq4019.c | 43 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'drivers/net/mdio') diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig index 99a6c13a11af..a94d34cc7dc1 100644 --- a/drivers/net/mdio/Kconfig +++ b/drivers/net/mdio/Kconfig @@ -169,6 +169,7 @@ config MDIO_OCTEON config MDIO_IPQ4019 tristate "Qualcomm IPQ4019 MDIO interface support" depends on HAS_IOMEM && OF_MDIO + depends on COMMON_CLK help This driver supports the MDIO interface found in Qualcomm IPQ40xx series Soc-s. diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c index 9cd71d896963..e14d437e42a8 100644 --- a/drivers/net/mdio/mdio-ipq4019.c +++ b/drivers/net/mdio/mdio-ipq4019.c @@ -11,6 +11,7 @@ #include #include #include +#include #define MDIO_MODE_REG 0x40 #define MDIO_ADDR_REG 0x44 @@ -31,8 +32,15 @@ #define IPQ4019_MDIO_TIMEOUT 10000 #define IPQ4019_MDIO_SLEEP 10 +/* MDIO clock source frequency is fixed to 100M */ +#define IPQ_MDIO_CLK_RATE 100000000 + +#define IPQ_PHY_SET_DELAY_US 100000 + struct ipq4019_mdio_data { void __iomem *membase; + void __iomem *eth_ldo_rdy; + struct clk *mdio_clk; }; static int ipq4019_mdio_wait_busy(struct mii_bus *bus) @@ -171,10 +179,35 @@ static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum, return 0; } +static int ipq_mdio_reset(struct mii_bus *bus) +{ + struct ipq4019_mdio_data *priv = bus->priv; + u32 val; + int ret; + + /* To indicate CMN_PLL that ethernet_ldo has been ready if platform resource 1 + * is specified in the device tree. + */ + if (priv->eth_ldo_rdy) { + val = readl(priv->eth_ldo_rdy); + val |= BIT(0); + writel(val, priv->eth_ldo_rdy); + fsleep(IPQ_PHY_SET_DELAY_US); + } + + /* Configure MDIO clock source frequency if clock is specified in the device tree */ + ret = clk_set_rate(priv->mdio_clk, IPQ_MDIO_CLK_RATE); + if (ret) + return ret; + + return clk_prepare_enable(priv->mdio_clk); +} + static int ipq4019_mdio_probe(struct platform_device *pdev) { struct ipq4019_mdio_data *priv; struct mii_bus *bus; + struct resource *res; int ret; bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); @@ -187,9 +220,19 @@ static int ipq4019_mdio_probe(struct platform_device *pdev) if (IS_ERR(priv->membase)) return PTR_ERR(priv->membase); + priv->mdio_clk = devm_clk_get_optional(&pdev->dev, "gcc_mdio_ahb_clk"); + if (IS_ERR(priv->mdio_clk)) + return PTR_ERR(priv->mdio_clk); + + /* The platform resource is provided on the chipset IPQ5018 */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) + priv->eth_ldo_rdy = devm_ioremap_resource(&pdev->dev, res); + bus->name = "ipq4019_mdio"; bus->read = ipq4019_mdio_read; bus->write = ipq4019_mdio_write; + bus->reset = ipq_mdio_reset; bus->parent = &pdev->dev; snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id); -- cgit