From 7d2e8d00b47b973c92db4df7444d5e6d3bb945f9 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 18 Oct 2009 18:22:32 +0200 Subject: pcmcia: use pre-determined values A few PCMCIA network drivers can make use of values provided by the pcmcia core, instead of tedious, independent CIS parsing. xirc32ps_cs.c: manf_id hostap_cs.c: multifunction count b43/pcmcia.c: ConfigBase address and "Present" smc91c92_cs.c: By default, mhz_setup() can use VERS_1 as it is stored in struct pcmcia_device. Only some cards require workarounds, such as reading out VERS_1 twice. CC: David S. Miller CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Acked-by: John W. Linville Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index cf8423102538..5e203230144f 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -792,13 +792,12 @@ xirc2ps_config(struct pcmcia_device * link) tuple.TupleOffset = 0; /* Is this a valid card */ - tuple.DesiredTuple = CISTPL_MANFID; - if ((err=first_tuple(link, &tuple, &parse))) { + if (link->has_manf_id == 0) { printk(KNOT_XIRC "manfid not found in CIS\n"); goto failure; } - switch(parse.manfid.manf) { + switch (link->manf_id) { case MANFID_XIRCOM: local->manf_str = "Xircom"; break; @@ -822,6 +821,13 @@ xirc2ps_config(struct pcmcia_device * link) } DEBUG(0, "found %s card\n", local->manf_str); + /* needed for the additional fields to be parsed by set_card_type() */ + tuple.DesiredTuple = CISTPL_MANFID; + err = first_tuple(link, &tuple, &parse) + if (err) { + printk(KNOT_XIRC "manfid not found in CIS\n"); + goto failure; + } if (!set_card_type(link, buf)) { printk(KNOT_XIRC "this card is not supported\n"); goto failure; -- cgit From dddfbd824b96a25da0b2f1cf35c0be33ef2422fe Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 18 Oct 2009 23:54:24 +0200 Subject: pcmcia: convert net pcmcia drivers to use new CIS helpers Use the new CIS helpers in net pcmcia drivers, which allows for a few code cleanups. This revision does not remove the phys_addr assignment in 3c589_cs.c -- a bug noted by Komuro CC: David S. Miller CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 147 ++++++++++++++++------------------------ 1 file changed, 58 insertions(+), 89 deletions(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 5e203230144f..925e85096629 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -359,7 +359,7 @@ static void xirc_tx_timeout(struct net_device *dev); static void xirc2ps_tx_timeout_task(struct work_struct *work); static void set_addresses(struct net_device *dev); static void set_multicast_list(struct net_device *dev); -static int set_card_type(struct pcmcia_device *link, const void *s); +static int set_card_type(struct pcmcia_device *link); static int do_config(struct net_device *dev, struct ifmap *map); static int do_open(struct net_device *dev); static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); @@ -371,28 +371,6 @@ static void do_powerdown(struct net_device *dev); static int do_stop(struct net_device *dev); /*=============== Helper functions =========================*/ -static int -first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - int err; - - if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 && - (err = pcmcia_get_tuple_data(handle, tuple)) == 0) - err = pcmcia_parse_tuple(tuple, parse); - return err; -} - -static int -next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - int err; - - if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 && - (err = pcmcia_get_tuple_data(handle, tuple)) == 0) - err = pcmcia_parse_tuple(tuple, parse); - return err; -} - #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR) #define GetByte(reg) ((unsigned)inb(ioaddr + (reg))) #define GetWord(reg) ((unsigned)inw(ioaddr + (reg))) @@ -644,15 +622,23 @@ xirc2ps_detach(struct pcmcia_device *link) * */ static int -set_card_type(struct pcmcia_device *link, const void *s) +set_card_type(struct pcmcia_device *link) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); - #ifdef PCMCIA_DEBUG - unsigned cisrev = ((const unsigned char *)s)[2]; - #endif - unsigned mediaid= ((const unsigned char *)s)[3]; - unsigned prodid = ((const unsigned char *)s)[4]; + u8 *buf; + unsigned int cisrev, mediaid, prodid; + size_t len; + + len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf); + if (len < 5) { + dev_err(&link->dev, "invalid CIS -- sorry\n"); + return 0; + } + + cisrev = buf[2]; + mediaid = buf[3]; + prodid = buf[4]; DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n", cisrev, mediaid, prodid); @@ -761,6 +747,26 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, } + +static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) +{ + struct net_device *dev = priv; + int i; + + if (tuple->TupleDataLen != 13) + return -EINVAL; + if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) || + (tuple->TupleData[2] != 6)) + return -EINVAL; + /* another try (James Lehmer's CE2 version 4.1)*/ + for (i = 2; i < 6; i++) + dev->dev_addr[i] = tuple->TupleData[i+2]; + return 0; +}; + + /**************** * xirc2ps_config() is scheduled to run after a CARD_INSERTION event * is received, to configure the PCMCIA socket, and to make the @@ -772,25 +778,14 @@ xirc2ps_config(struct pcmcia_device * link) struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); unsigned int ioaddr; - tuple_t tuple; - cisparse_t parse; - int err, i; - u_char buf[64]; - cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data; + int err; + u8 *buf; + size_t len; local->dingo_ccr = NULL; DEBUG(0, "config(0x%p)\n", link); - /* - * This reads the card's CONFIG tuple to find its configuration - * registers. - */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - /* Is this a valid card */ if (link->has_manf_id == 0) { printk(KNOT_XIRC "manfid not found in CIS\n"); @@ -816,67 +811,41 @@ xirc2ps_config(struct pcmcia_device * link) break; default: printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n", - (unsigned)parse.manfid.manf); + (unsigned)link->manf_id); goto failure; } DEBUG(0, "found %s card\n", local->manf_str); - /* needed for the additional fields to be parsed by set_card_type() */ - tuple.DesiredTuple = CISTPL_MANFID; - err = first_tuple(link, &tuple, &parse) - if (err) { - printk(KNOT_XIRC "manfid not found in CIS\n"); - goto failure; - } - if (!set_card_type(link, buf)) { + if (!set_card_type(link)) { printk(KNOT_XIRC "this card is not supported\n"); goto failure; } /* get the ethernet address from the CIS */ - tuple.DesiredTuple = CISTPL_FUNCE; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)) { - /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries: - * the first one with a length of zero the second correct - - * so I skip all entries with length 0 */ - if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID - && ((cistpl_lan_node_id_t *)parse.funce.data)->nb) - break; - } - if (err) { /* not found: try to get the node-id from tuple 0x89 */ - tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */ - if ((err = pcmcia_get_first_tuple(link, &tuple)) == 0 && - (err = pcmcia_get_tuple_data(link, &tuple)) == 0) { - if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID) - memcpy(&parse, buf, 8); - else - err = -1; - } - } - if (err) { /* another try (James Lehmer's CE2 version 4.1)*/ - tuple.DesiredTuple = CISTPL_FUNCE; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)) { - if (parse.funce.type == 0x02 && parse.funce.data[0] == 1 - && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) { - buf[1] = 4; - memcpy(&parse, buf+1, 8); - break; + err = pcmcia_get_mac_from_cis(link, dev); + + /* not found: try to get the node-id from tuple 0x89 */ + if (err) { + len = pcmcia_get_tuple(link, 0x89, &buf); + /* data layout looks like tuple 0x22 */ + if (buf && len == 8) { + if (*buf == CISTPL_FUNCE_LAN_NODE_ID) { + int i; + for (i = 2; i < 6; i++) + dev->dev_addr[i] = buf[i+2]; + } else + err = -1; } - } + kfree(buf); } + + if (err) + err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev); + if (err) { printk(KNOT_XIRC "node-id not found in CIS\n"); goto failure; } - node_id = (cistpl_lan_node_id_t *)parse.funce.data; - if (node_id->nb != 6) { - printk(KNOT_XIRC "malformed node-id in CIS\n"); - goto failure; - } - for (i=0; i < 6; i++) - dev->dev_addr[i] = node_id->id[i]; link->io.IOAddrLines =10; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; -- cgit From dd0fab5b940c0b65f26ac5b01485bac1f690ace6 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Oct 2009 15:51:05 +0200 Subject: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (net) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Only some rare debug checks are now hidden behind "#ifdef DEBUG" or "#if 0". Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 109 +++++++++++++++------------------------- 1 file changed, 41 insertions(+), 68 deletions(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 925e85096629..fbf926539285 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -211,20 +211,6 @@ enum xirc_cmd { /* Commands */ static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" }; -/**************** - * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - * you do not define PCMCIA_DEBUG at all, all the debug code will be - * left out. If you compile with PCMCIA_DEBUG=0, the debug code will - * be present but disabled -- but it can then be enabled for specific - * modules at load time with a 'pc_debug=#' option to insmod. - */ -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args) -#else -#define DEBUG(n, args...) -#endif #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: " #define KERR_XIRC KERN_ERR "xirc2ps_cs: " @@ -378,7 +364,7 @@ static int do_stop(struct net_device *dev); #define PutWord(reg,value) outw((value), ioaddr+(reg)) /*====== Functions used for debugging =================================*/ -#if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */ +#if 0 /* reading regs may change system status */ static void PrintRegisters(struct net_device *dev) { @@ -410,7 +396,7 @@ PrintRegisters(struct net_device *dev) } } } -#endif /* PCMCIA_DEBUG */ +#endif /* 0 */ /*============== MII Management functions ===============*/ @@ -554,7 +540,7 @@ xirc2ps_probe(struct pcmcia_device *link) struct net_device *dev; local_info_t *local; - DEBUG(0, "attach()\n"); + dev_dbg(&link->dev, "attach()\n"); /* Allocate the device structure */ dev = alloc_etherdev(sizeof(local_info_t)); @@ -593,7 +579,7 @@ xirc2ps_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; - DEBUG(0, "detach(0x%p)\n", link); + dev_dbg(&link->dev, "detach\n"); if (link->dev_node) unregister_netdev(dev); @@ -640,7 +626,7 @@ set_card_type(struct pcmcia_device *link) mediaid = buf[3]; prodid = buf[4]; - DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n", + dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n", cisrev, mediaid, prodid); local->mohawk = 0; @@ -784,7 +770,7 @@ xirc2ps_config(struct pcmcia_device * link) local->dingo_ccr = NULL; - DEBUG(0, "config(0x%p)\n", link); + dev_dbg(&link->dev, "config\n"); /* Is this a valid card */ if (link->has_manf_id == 0) { @@ -814,7 +800,7 @@ xirc2ps_config(struct pcmcia_device * link) (unsigned)link->manf_id); goto failure; } - DEBUG(0, "found %s card\n", local->manf_str); + dev_dbg(&link->dev, "found %s card\n", local->manf_str); if (!set_card_type(link)) { printk(KNOT_XIRC "this card is not supported\n"); @@ -891,10 +877,8 @@ xirc2ps_config(struct pcmcia_device * link) goto port_found; } link->io.BasePort1 = 0; /* let CS decide */ - if ((err=pcmcia_request_io(link, &link->io))) { - cs_error(link, RequestIO, err); + if ((err=pcmcia_request_io(link, &link->io))) goto config_error; - } } port_found: if (err) @@ -904,19 +888,15 @@ xirc2ps_config(struct pcmcia_device * link) * Now allocate an interrupt line. Note that this does not * actually assign a handler to the interrupt. */ - if ((err=pcmcia_request_irq(link, &link->irq))) { - cs_error(link, RequestIRQ, err); + if ((err=pcmcia_request_irq(link, &link->irq))) goto config_error; - } /**************** * This actually configures the PCMCIA socket -- setting up * the I/O windows and the interrupt mapping. */ - if ((err=pcmcia_request_configuration(link, &link->conf))) { - cs_error(link, RequestConfiguration, err); + if ((err=pcmcia_request_configuration(link, &link->conf))) goto config_error; - } if (local->dingo) { conf_reg_t reg; @@ -931,17 +911,13 @@ xirc2ps_config(struct pcmcia_device * link) reg.Action = CS_WRITE; reg.Offset = CISREG_IOBASE_0; reg.Value = link->io.BasePort2 & 0xff; - if ((err = pcmcia_access_configuration_register(link, ®))) { - cs_error(link, AccessConfigurationRegister, err); + if ((err = pcmcia_access_configuration_register(link, ®))) goto config_error; - } reg.Action = CS_WRITE; reg.Offset = CISREG_IOBASE_1; reg.Value = (link->io.BasePort2 >> 8) & 0xff; - if ((err = pcmcia_access_configuration_register(link, ®))) { - cs_error(link, AccessConfigurationRegister, err); + if ((err = pcmcia_access_configuration_register(link, ®))) goto config_error; - } /* There is no config entry for the Ethernet part which * is at 0x0800. So we allocate a window into the attribute @@ -950,17 +926,14 @@ xirc2ps_config(struct pcmcia_device * link) req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; req.Base = req.Size = 0; req.AccessSpeed = 0; - if ((err = pcmcia_request_window(&link, &req, &link->win))) { - cs_error(link, RequestWindow, err); + if ((err = pcmcia_request_window(&link, &req, &link->win))) goto config_error; - } + local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; mem.CardOffset = 0x0; mem.Page = 0; - if ((err = pcmcia_map_mem_page(link->win, &mem))) { - cs_error(link, MapMemPage, err); + if ((err = pcmcia_map_mem_page(link->win, &mem))) goto config_error; - } /* Setup the CCRs; there are no infos in the CIS about the Ethernet * part. @@ -1052,7 +1025,7 @@ xirc2ps_config(struct pcmcia_device * link) static void xirc2ps_release(struct pcmcia_device *link) { - DEBUG(0, "release(0x%p)\n", link); + dev_dbg(&link->dev, "release\n"); if (link->win) { struct net_device *dev = link->priv; @@ -1119,7 +1092,7 @@ xirc2ps_interrupt(int irq, void *dev_id) PutByte(XIRCREG_CR, 0); } - DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr); + pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr); saved_page = GetByte(XIRCREG_PR); /* Read the ISR to see whats the cause for the interrupt. @@ -1129,7 +1102,7 @@ xirc2ps_interrupt(int irq, void *dev_id) bytes_rcvd = 0; loop_entry: if (int_status == 0xff) { /* card may be ejected */ - DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq); + pr_debug("%s: interrupt %d for dead card\n", dev->name, irq); goto leave; } eth_status = GetByte(XIRCREG_ESR); @@ -1142,7 +1115,7 @@ xirc2ps_interrupt(int irq, void *dev_id) PutByte(XIRCREG40_TXST0, 0); PutByte(XIRCREG40_TXST1, 0); - DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n", + pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n", dev->name, int_status, eth_status, rx_status, tx_status); /***** receive section ******/ @@ -1153,14 +1126,14 @@ xirc2ps_interrupt(int irq, void *dev_id) /* too many bytes received during this int, drop the rest of the * packets */ dev->stats.rx_dropped++; - DEBUG(2, "%s: RX drop, too much done\n", dev->name); + pr_debug("%s: RX drop, too much done\n", dev->name); } else if (rsr & PktRxOk) { struct sk_buff *skb; pktlen = GetWord(XIRCREG0_RBC); bytes_rcvd += pktlen; - DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen); + pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen); skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */ if (!skb) { @@ -1228,19 +1201,19 @@ xirc2ps_interrupt(int irq, void *dev_id) dev->stats.multicast++; } } else { /* bad packet */ - DEBUG(5, "rsr=%#02x\n", rsr); + pr_debug("rsr=%#02x\n", rsr); } if (rsr & PktTooLong) { dev->stats.rx_frame_errors++; - DEBUG(3, "%s: Packet too long\n", dev->name); + pr_debug("%s: Packet too long\n", dev->name); } if (rsr & CRCErr) { dev->stats.rx_crc_errors++; - DEBUG(3, "%s: CRC error\n", dev->name); + pr_debug("%s: CRC error\n", dev->name); } if (rsr & AlignErr) { dev->stats.rx_fifo_errors++; /* okay ? */ - DEBUG(3, "%s: Alignment error\n", dev->name); + pr_debug("%s: Alignment error\n", dev->name); } /* clear the received/dropped/error packet */ @@ -1252,7 +1225,7 @@ xirc2ps_interrupt(int irq, void *dev_id) if (rx_status & 0x10) { /* Receive overrun */ dev->stats.rx_over_errors++; PutByte(XIRCREG_CR, ClearRxOvrun); - DEBUG(3, "receive overrun cleared\n"); + pr_debug("receive overrun cleared\n"); } /***** transmit section ******/ @@ -1265,13 +1238,13 @@ xirc2ps_interrupt(int irq, void *dev_id) if (nn < n) /* rollover */ dev->stats.tx_packets += 256 - n; else if (n == nn) { /* happens sometimes - don't know why */ - DEBUG(0, "PTR not changed?\n"); + pr_debug("PTR not changed?\n"); } else dev->stats.tx_packets += lp->last_ptr_value - n; netif_wake_queue(dev); } if (tx_status & 0x0002) { /* Execessive collissions */ - DEBUG(0, "tx restarted due to execssive collissions\n"); + pr_debug("tx restarted due to execssive collissions\n"); PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */ } if (tx_status & 0x0040) @@ -1290,14 +1263,14 @@ xirc2ps_interrupt(int irq, void *dev_id) maxrx_bytes = 2000; else if (maxrx_bytes > 22000) maxrx_bytes = 22000; - DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n", + pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n", maxrx_bytes, bytes_rcvd, duration); } else if (!duration && maxrx_bytes < 22000) { /* now much faster */ maxrx_bytes += 2000; if (maxrx_bytes > 22000) maxrx_bytes = 22000; - DEBUG(1, "set maxrx=%u\n", maxrx_bytes); + pr_debug("set maxrx=%u\n", maxrx_bytes); } } @@ -1347,7 +1320,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned freespace; unsigned pktlen = skb->len; - DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n", + pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n", skb, dev, pktlen); @@ -1373,7 +1346,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev) freespace &= 0x7fff; /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */ okay = pktlen +2 < freespace; - DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n", + pr_debug("%s: avail. tx space=%u%s\n", dev->name, freespace, okay ? " (okay)":" (not enough)"); if (!okay) { /* not enough space */ return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */ @@ -1475,7 +1448,7 @@ do_config(struct net_device *dev, struct ifmap *map) { local_info_t *local = netdev_priv(dev); - DEBUG(0, "do_config(%p)\n", dev); + pr_debug("do_config(%p)\n", dev); if (map->port != 255 && map->port != dev->if_port) { if (map->port > 4) return -EINVAL; @@ -1502,7 +1475,7 @@ do_open(struct net_device *dev) local_info_t *lp = netdev_priv(dev); struct pcmcia_device *link = lp->p_dev; - DEBUG(0, "do_open(%p)\n", dev); + dev_dbg(&link->dev, "do_open(%p)\n", dev); /* Check that the PCMCIA card is still here. */ /* Physical device present signature. */ @@ -1536,7 +1509,7 @@ do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) unsigned int ioaddr = dev->base_addr; struct mii_ioctl_data *data = if_mii(rq); - DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n", + pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n", dev->name, rq->ifr_ifrn.ifrn_name, cmd, data->phy_id, data->reg_num, data->val_in, data->val_out); @@ -1585,7 +1558,7 @@ do_reset(struct net_device *dev, int full) unsigned int ioaddr = dev->base_addr; unsigned value; - DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full); + pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full); hardreset(dev); PutByte(XIRCREG_CR, SoftReset); /* set */ @@ -1623,8 +1596,8 @@ do_reset(struct net_device *dev, int full) } msleep(40); /* wait 40 msec to let it complete */ - #ifdef PCMCIA_DEBUG - if (pc_debug) { + #if 0 + { SelectPage(0); value = GetByte(XIRCREG_ESR); /* read the ESR */ printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value); @@ -1641,7 +1614,7 @@ do_reset(struct net_device *dev, int full) value |= DisableLinkPulse; PutByte(XIRCREG1_ECR, value); #endif - DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value); + pr_debug("%s: ECR is: %#02x\n", dev->name, value); SelectPage(0x42); PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */ @@ -1819,7 +1792,7 @@ do_powerdown(struct net_device *dev) unsigned int ioaddr = dev->base_addr; - DEBUG(0, "do_powerdown(%p)\n", dev); + pr_debug("do_powerdown(%p)\n", dev); SelectPage(4); PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ @@ -1833,7 +1806,7 @@ do_stop(struct net_device *dev) local_info_t *lp = netdev_priv(dev); struct pcmcia_device *link = lp->p_dev; - DEBUG(0, "do_stop(%p)\n", dev); + dev_dbg(&link->dev, "do_stop(%p)\n", dev); if (!link) return -ENODEV; -- cgit From 868575d1e87ff2091800aea816972ddb46de60d5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Dec 2006 19:46:43 +0900 Subject: pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page() No logic changes, just pass struct pcmcia_device to pcmcia_map_mem_page() [linux@dominikbrodowski.net: update to 2.6.31] CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: Jiri Kosina Acked-by: Karsten Keil (for ISDN) Signed-off-by: Magnus Damm Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index fbf926539285..9bc4d6002ae0 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -932,7 +932,7 @@ xirc2ps_config(struct pcmcia_device * link) local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; mem.CardOffset = 0x0; mem.Page = 0; - if ((err = pcmcia_map_mem_page(link->win, &mem))) + if ((err = pcmcia_map_mem_page(link, link->win, &mem))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet -- cgit From 6838b03fc6564ea07d0cd87ea6e198d90ab1fc3e Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 3 Nov 2009 01:31:52 +0100 Subject: pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer pcmcia_request_window() only needs a pointer to struct pcmcia_device, not a pointer to a pointer. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: Jiri Kosina Acked-by: Karsten Keil (for ISDN) Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 9bc4d6002ae0..265852ab1a2d 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -926,7 +926,7 @@ xirc2ps_config(struct pcmcia_device * link) req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; req.Base = req.Size = 0; req.AccessSpeed = 0; - if ((err = pcmcia_request_window(&link, &req, &link->win))) + if ((err = pcmcia_request_window(link, &req, &link->win))) goto config_error; local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; -- cgit From dd2e5a156525f11754d9b1e0583f6bb49c253d62 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 3 Nov 2009 10:27:34 +0100 Subject: pcmcia: remove deprecated handle_to_dev() macro Update remaining users and remove deprecated handle_to_dev() macro CC: Harald Welte CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 265852ab1a2d..f75ac716390d 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -992,7 +992,7 @@ xirc2ps_config(struct pcmcia_device * link) do_reset(dev, 1); /* a kludge to make the cem56 work */ link->dev_node = &local->node; - SET_NETDEV_DEV(dev, &handle_to_dev(link)); + SET_NETDEV_DEV(dev, &link->dev); if ((err=register_netdev(dev))) { printk(KNOT_XIRC "register_netdev() failed\n"); -- cgit From 5fa9167a1bf5f5a4b7282f5e7ac56a4a5a1fa044 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 8 Nov 2009 17:24:46 +0100 Subject: pcmcia: rework the irq_req_t typedef Most of the irq_req_t typedef'd struct can be re-worked quite easily: (1) IRQInfo2 was unused in any case, so drop it. (2) IRQInfo1 was used write-only, so drop it. (3) Instance (private data to be passed to the IRQ handler): Most PCMCIA drivers using pcmcia_request_irq() to actually register an IRQ handler set the "dev_id" to the same pointer as the "priv" pointer in struct pcmcia_device. Modify the two exceptions (ipwireless, ibmtr_cs) to also work this waym and set the IRQ handler's "dev_id" to p_dev->priv unconditionally. (4) Handler is to be of type irq_handler_t. (5) Handler != NULL already tells whether an IRQ handler is present. Therefore, we do not need the IRQ_HANDLER_PRESENT flag in irq_req_t.Attributes. CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: alsa-devel@alsa-project.org CC: Jaroslav Kysela CC: Jiri Kosina CC: Karsten Keil for the Bluetooth parts: Acked-by: Marcel Holtmann Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index f75ac716390d..fe504b7f369f 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -556,7 +556,6 @@ xirc2ps_probe(struct pcmcia_device *link) link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; link->irq.Handler = xirc2ps_interrupt; - link->irq.Instance = dev; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -835,8 +834,6 @@ xirc2ps_config(struct pcmcia_device * link) link->io.IOAddrLines =10; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->irq.Attributes = IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; if (local->modem) { int pass; -- cgit