From 79fb218d97980d4fee9a64f4c8ff05289364ba25 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 22 May 2018 17:04:49 -0700 Subject: net: phy: broadcom: Fix bcm_write_exp() On newer PHYs, we need to select the expansion register to write with setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior to being migrated to generic code under bcm-phy-lib.c which unfortunately used the older implementation from the BCM54xx days. Fix this by creating an inline stub: bcm_write_exp_sel() which adds the correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY and BCM7xxx PHY drivers which require setting these bits. broadcom.c is unchanged because some PHYs even use a different selector method, so let them specify it directly (e.g: SerDes secondary selector). Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm-cygnus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/phy/bcm-cygnus.c') diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c index 6838129839ca..e757b09f1889 100644 --- a/drivers/net/phy/bcm-cygnus.c +++ b/drivers/net/phy/bcm-cygnus.c @@ -61,17 +61,17 @@ static int bcm_cygnus_afe_config(struct phy_device *phydev) return rc; /* make rcal=100, since rdb default is 000 */ - rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10); + rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB1, 0x10); if (rc < 0) return rc; /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */ - rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10); + rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x10); if (rc < 0) return rc; /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */ - rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00); + rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x00); return 0; } -- cgit