From f8ee45fcbc5a94177d031b22f4e5a47d45874037 Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Wed, 7 Apr 2021 22:22:43 +0200 Subject: net: phy: marvell10g: add all MACTYPE definitions for 88X33x0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add all MACTYPE definitions for 88X3310, 88X3310P, 88X3340 and 88X3340P. In order to have consistent naming, rename MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH to MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH. Signed-off-by: Marek Behún Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell10g.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/net/phy/marvell10g.c') diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 7552a658a513..7d9a45437b69 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -78,10 +78,18 @@ enum { /* Vendor2 MMD registers */ MV_V2_PORT_CTRL = 0xf001, - MV_V2_PORT_CTRL_PWRDOWN = BIT(11), - MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), - MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, - MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH = 0x6, + MV_V2_PORT_CTRL_PWRDOWN = BIT(11), + MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), + MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, + MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI = 0x0, + MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH = 0x1, + MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN = 0x1, + MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH = 0x2, + MV_V2_3310_PORT_CTRL_MACTYPE_XAUI = 0x3, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER = 0x4, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6, + MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7, /* Temperature control/read registers (88X3310 only) */ MV_V2_TEMP_CTRL = 0xf08a, MV_V2_TEMP_CTRL_MASK = 0xc000, @@ -480,7 +488,7 @@ static int mv3310_config_init(struct phy_device *phydev) if (val < 0) return val; priv->rate_match = ((val & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK) == - MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH); + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH); /* Enable EDPD mode - saving 600mW */ return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); -- cgit