From 49168d1980e220cf3d1b761e1eafac62041cb94d Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 2 Mar 2024 20:53:04 +0100 Subject: net: phy: Add phy_support_eee() indicating MAC support EEE In order for EEE to operate, both the MAC and the PHY need to support it, similar to how pause works. With some exception - a number of PHYs have SmartEEE or AutoGrEEEn support in order to provide some EEE-like power savings with non-EEE capable MACs. Copy the pause concept and add the call phy_support_eee() which the MAC makes after connecting the PHY to indicate it supports EEE. phylib will then advertise EEE when auto-neg is performed. Signed-off-by: Andrew Lunn Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240302195306.3207716-6-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski --- drivers/net/phy/phy_device.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers/net/phy/phy_device.c') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 2eefee970851..72452e6a478c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -2910,6 +2910,34 @@ void phy_advertise_eee_all(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(phy_advertise_eee_all); +/** + * phy_support_eee - Set initial EEE policy configuration + * @phydev: Target phy_device struct + * + * This function configures the initial policy for Energy Efficient Ethernet + * (EEE) on the specified PHY device, influencing that EEE capabilities are + * advertised before the link is established. It should be called during PHY + * registration by the MAC driver and/or the PHY driver (for SmartEEE PHYs) + * if MAC supports LPI or PHY is capable to compensate missing LPI functionality + * of the MAC. + * + * The function sets default EEE policy parameters, including preparing the PHY + * to advertise EEE capabilities based on hardware support. + * + * It also sets the expected configuration for Low Power Idle (LPI) in the MAC + * driver. If the PHY framework determines that both local and remote + * advertisements support EEE, and the negotiated link mode is compatible with + * EEE, it will set enable_tx_lpi = true. The MAC driver is expected to act on + * this setting by enabling the LPI timer if enable_tx_lpi is set. + */ +void phy_support_eee(struct phy_device *phydev) +{ + linkmode_copy(phydev->advertising_eee, phydev->supported_eee); + phydev->eee_cfg.tx_lpi_enabled = true; + phydev->eee_cfg.eee_enabled = true; +} +EXPORT_SYMBOL(phy_support_eee); + /** * phy_support_sym_pause - Enable support of symmetrical pause * @phydev: target phy_device struct -- cgit