From c2a978c171a6d44d4d9710e7e4455f75d34aecee Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 17 Feb 2023 04:15:20 +0100 Subject: net: phy: Read EEE abilities when using .features A PHY driver can use a static integer value to indicate what link mode features it supports, i.e, its abilities.. This is the old way, but useful when dynamically determining the devices features does not work, e.g. support of fibre. EEE support has been moved into phydev->supported_eee. This needs to be set otherwise the code assumes EEE is not supported. It is normally set as part of reading the devices abilities. However if a static integer value was used, the dynamic reading of the abilities is not performed. Add a call to genphy_c45_read_eee_abilities() to read the EEE abilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Signed-off-by: Andrew Lunn Reviewed-by: Oleksij Rempel Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/phy/phy_device.c') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8d927c5e3bf8..71becceb8764 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -3113,8 +3113,10 @@ static int phy_probe(struct device *dev) * a controller will attach, and may modify one * or both of these values */ - if (phydrv->features) + if (phydrv->features) { linkmode_copy(phydev->supported, phydrv->features); + genphy_c45_read_eee_abilities(phydev); + } else if (phydrv->get_features) err = phydrv->get_features(phydev); else if (phydev->is_c45) -- cgit