From 4c8e0459b585e2a7b367545be3e102737f1e489f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 24 Feb 2019 01:11:15 +0100 Subject: net: phy: realtek: Dummy IRQ calls for RTL8366RB This fixes a regression introduced by commit 0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7 "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit Signed-off-by: Linus Walleij Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net/phy/realtek.c') diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index c6010fb1aa0f..cb4a23041a94 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -282,6 +282,13 @@ static struct phy_driver realtek_drvs[] = { .name = "RTL8366RB Gigabit Ethernet", .features = PHY_GBIT_FEATURES, .config_init = &rtl8366rb_config_init, + /* These interrupts are handled by the irq controller + * embedded inside the RTL8366RB, they get unmasked when the + * irq is requested and ACKed by reading the status register, + * which is done by the irqchip code. + */ + .ack_interrupt = genphy_no_ack_interrupt, + .config_intr = genphy_no_config_intr, .suspend = genphy_suspend, .resume = genphy_resume, }, -- cgit