From 62d01535474b612b3c5d864999b17cbf2cd8f2cc Mon Sep 17 00:00:00 2001
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: Sat, 23 Feb 2019 00:37:44 +0100
Subject: net: phy: marvell10g: add support for the 88x2110 PHY
This patch adds support for the 88x2110 PHY, which is similar to the
already supported 88x3310 PHY without the SFP interface.
It supports 10/100/1000BASET along with 2.5GBASET, 5GBASET and 10GBASET,
with the same interface modes that are used by the 3310.
This PHY don't have the same issue as the 88x3310 regarding 2.5/5G
abilities, and correctly follows the 802.3bz standard to list the
supported abilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/marvell10g.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
(limited to 'drivers/net/phy')
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 8f354c3f3876..580e91deadbc 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -478,12 +478,25 @@ static struct phy_driver mv3310_drivers[] = {
.aneg_done = mv3310_aneg_done,
.read_status = mv3310_read_status,
},
+ {
+ .phy_id = MARVELL_PHY_ID_88E2110,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "mv88x2110",
+ .features = PHY_10GBIT_FEATURES,
+ .probe = mv3310_probe,
+ .soft_reset = gen10g_no_soft_reset,
+ .config_init = mv3310_config_init,
+ .config_aneg = mv3310_config_aneg,
+ .aneg_done = mv3310_aneg_done,
+ .read_status = mv3310_read_status,
+ },
};
module_phy_driver(mv3310_drivers);
static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
{ },
};
MODULE_DEVICE_TABLE(mdio, mv3310_tbl);
--
cgit