From b0e67fbb48f1537471740acc35644fa593e1010a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 16 Jan 2020 19:36:56 +0200 Subject: net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modes For some reason, PHYLINK does not put the copper modes for 802.3bz (NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R, USXGMII). One possible way through which the cable side can work at the lower speed is by having the PHY emit PAUSE frames towards the MAC. So fix that omission. Also include the 2500Base-X fiber mode in this list while we're at it. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 2a68e1cda787..cecf18e57ac3 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -307,6 +307,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) phylink_set(pl->supported, 1000baseT_Half); phylink_set(pl->supported, 1000baseT_Full); phylink_set(pl->supported, 1000baseX_Full); + phylink_set(pl->supported, 2500baseT_Full); + phylink_set(pl->supported, 2500baseX_Full); + phylink_set(pl->supported, 5000baseT_Full); + phylink_set(pl->supported, 10000baseT_Full); phylink_set(pl->supported, 10000baseKR_Full); phylink_set(pl->supported, 10000baseCR_Full); phylink_set(pl->supported, 10000baseSR_Full); -- cgit