From 3dd4ef1bdbac959bb20faec93937720ddd9917c6 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 24 Jun 2020 15:58:24 +0800 Subject: net: phy: make phy_disable_interrupts() non-static We face an issue with rtl8211f, a pin is shared between INTB and PMEB, and the PHY Register Accessible Interrupt is enabled by default, so the INTB/PMEB pin is always active in polling mode case. As Heiner pointed out "I was thinking about calling phy_disable_interrupts() in phy_init_hw(), to have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." Make phy_disable_interrupts() non-static so that it could be used in phy_init_hw() to have a defined init state. Suggested-by: Heiner Kallweit Signed-off-by: Jisheng Zhang Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 1de3938628f4..56cfae950472 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -840,7 +840,7 @@ static void phy_error(struct phy_device *phydev) * phy_disable_interrupts - Disable the PHY interrupts from the PHY side * @phydev: target phy_device struct */ -static int phy_disable_interrupts(struct phy_device *phydev) +int phy_disable_interrupts(struct phy_device *phydev) { int err; -- cgit