From ad4f15dc2c70b1de5e0a64d27335962fbc9cf71c Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 11 Sep 2018 09:04:48 +0200 Subject: xen/netfront: don't bug in case of too many frags Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 9407acbd19a9..f17f602e6171 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -908,7 +908,11 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue, BUG_ON(pull_to <= skb_headlen(skb)); __pskb_pull_tail(skb, pull_to - skb_headlen(skb)); } - BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS); + if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) { + queue->rx.rsp_cons = ++cons; + kfree_skb(nskb); + return ~0U; + } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, skb_frag_page(nfrag), @@ -1045,6 +1049,8 @@ err: skb->len += rx->status; i = xennet_fill_frags(queue, skb, &tmpq); + if (unlikely(i == ~0U)) + goto err; if (rx->flags & XEN_NETRXF_csum_blank) skb->ip_summed = CHECKSUM_PARTIAL; -- cgit From 018349d70f28a78d5343b3660cb66e1667005f8a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 13 Sep 2018 08:03:43 -0700 Subject: hv_netvsc: fix schedule in RCU context When netvsc device is removed it can call reschedule in RCU context. This happens because canceling the subchannel setup work could (in theory) cause a reschedule when manipulating the timer. To reproduce, run with lockdep enabled kernel and unbind a network device from hv_netvsc (via sysfs). [ 160.682011] WARNING: suspicious RCU usage [ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted [ 160.709937] ----------------------------- [ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 160.723691] [ 160.723691] other info that might help us debug this: [ 160.723691] [ 160.730955] [ 160.730955] rcu_scheduler_active = 2, debug_locks = 1 [ 160.762813] 5 locks held by rebind-eth.sh/1812: [ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0 [ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0 [ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0 [ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250 [ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.828629] [ 160.828629] stack backtrace: [ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2 [ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 160.832952] Call Trace: [ 160.832952] dump_stack+0x85/0xcb [ 160.832952] ___might_sleep+0x1a3/0x240 [ 160.832952] __flush_work+0x57/0x2e0 [ 160.832952] ? __mutex_lock+0x83/0x990 [ 160.832952] ? __kernfs_remove+0x24f/0x2e0 [ 160.832952] ? __kernfs_remove+0x1b2/0x2e0 [ 160.832952] ? mark_held_locks+0x50/0x80 [ 160.832952] ? get_work_pool+0x90/0x90 [ 160.832952] __cancel_work_timer+0x13c/0x1e0 [ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.832952] ? __lock_is_held+0x55/0x90 [ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc] [ 160.832952] vmbus_remove+0x26/0x30 [ 160.832952] device_release_driver_internal+0x18a/0x250 [ 160.832952] unbind_store+0xb4/0x180 [ 160.832952] kernfs_fop_write+0x113/0x1a0 [ 160.832952] __vfs_write+0x36/0x1a0 [ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80 [ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60 [ 160.832952] ? __sb_start_write+0x141/0x1a0 [ 160.832952] ? vfs_write+0x184/0x1b0 [ 160.832952] vfs_write+0xbe/0x1b0 [ 160.832952] ksys_write+0x55/0xc0 [ 160.832952] do_syscall_64+0x60/0x1b0 [ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 160.832952] RIP: 0033:0x7fe48f4c8154 Resolve this by getting RTNL earlier. This is safe because the subchannel work queue does trylock on RTNL and will detect the race. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Stephen Hemminger Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 70921bbe0e28..915fbd66a02b 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2272,17 +2272,15 @@ static int netvsc_remove(struct hv_device *dev) cancel_delayed_work_sync(&ndev_ctx->dwork); - rcu_read_lock(); - nvdev = rcu_dereference(ndev_ctx->nvdev); - - if (nvdev) + rtnl_lock(); + nvdev = rtnl_dereference(ndev_ctx->nvdev); + if (nvdev) cancel_work_sync(&nvdev->subchan_work); /* * Call to the vsc driver to let it know that the device is being * removed. Also blocks mtu and channel changes. */ - rtnl_lock(); vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev); if (vf_netdev) netvsc_unregister_vf(vf_netdev); @@ -2294,7 +2292,6 @@ static int netvsc_remove(struct hv_device *dev) list_del(&ndev_ctx->list); rtnl_unlock(); - rcu_read_unlock(); hv_set_drvdata(dev, NULL); -- cgit From 9824dfae5741275473a23a7ed5756c7b6efacc9d Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Wed, 12 Sep 2018 07:36:35 +0200 Subject: net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT Fields ->dev and ->next of struct ipddp_route may be copied to userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible to CAP_NET_ADMIN though. Let's manually copy the relevant fields instead of using memcpy(). BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Cc: Jann Horn Signed-off-by: Willy Tarreau Signed-off-by: David S. Miller --- drivers/net/appletalk/ipddp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index 9375cef22420..3d27616d9c85 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -283,8 +283,12 @@ static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCFINDIPDDPRT: spin_lock_bh(&ipddp_route_lock); rp = __ipddp_find_route(&rcp); - if (rp) - memcpy(&rcp2, rp, sizeof(rcp2)); + if (rp) { + memset(&rcp2, 0, sizeof(rcp2)); + rcp2.ip = rp->ip; + rcp2.at = rp->at; + rcp2.flags = rp->flags; + } spin_unlock_bh(&ipddp_route_lock); if (rp) { -- cgit From edf2ef7242805e53ec2e0841db26e06d8bc7da70 Mon Sep 17 00:00:00 2001 From: Jongsung Kim Date: Thu, 13 Sep 2018 18:32:21 +0900 Subject: stmmac: fix valid numbers of unicast filter entries Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition. Signed-off-by: Jongsung Kim Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 3609c7b696c7..2b800ce1d5bf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -67,7 +67,7 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins) * Description: * This function validates the number of Unicast address entries supported * by a particular Synopsys 10/100/1000 controller. The Synopsys controller - * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter + * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter * logic. This function validates a valid, supported configuration is * selected, and defaults to 1 Unicast address if an unsupported * configuration is selected. @@ -77,8 +77,7 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) int x = ucast_entries; switch (x) { - case 1: - case 32: + case 1 ... 32: case 64: case 128: break; -- cgit From 4bf9ffa0fb5744ed40d7348c24fa9ae398b1d603 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Fri, 14 Sep 2018 13:33:44 +0900 Subject: veth: Orphan skb before GRO GRO expects skbs not to be owned by sockets, but when XDP is enabled veth passed skbs owned by sockets. It caused corrupted sk_wmem_alloc. Paolo Abeni reported the following splat: [ 362.098904] refcount_t overflow at skb_set_owner_w+0x5e/0xa0 in iperf3[1644], uid/euid: 0/0 [ 362.108239] WARNING: CPU: 0 PID: 1644 at kernel/panic.c:648 refcount_error_report+0xa0/0xa4 [ 362.117547] Modules linked in: tcp_diag inet_diag veth intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore intel_rapl_perf ipmi_ssif iTCO_wdt sg ipmi_si iTCO_vendor_support ipmi_devintf mxm_wmi ipmi_msghandler pcspkr dcdbas mei_me wmi mei lpc_ich acpi_power_meter pcc_cpufreq xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ixgbe igb ttm ahci mdio libahci ptp crc32c_intel drm pps_core libata i2c_algo_bit dca dm_mirror dm_region_hash dm_log dm_mod [ 362.176622] CPU: 0 PID: 1644 Comm: iperf3 Not tainted 4.19.0-rc2.vanilla+ #2025 [ 362.184777] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 362.193124] RIP: 0010:refcount_error_report+0xa0/0xa4 [ 362.198758] Code: 08 00 00 48 8b 95 80 00 00 00 49 8d 8c 24 80 0a 00 00 41 89 c1 44 89 2c 24 48 89 de 48 c7 c7 18 4d e7 9d 31 c0 e8 30 fa ff ff <0f> 0b eb 88 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc [ 362.219711] RSP: 0018:ffff9ee6ff603c20 EFLAGS: 00010282 [ 362.225538] RAX: 0000000000000000 RBX: ffffffff9de83e10 RCX: 0000000000000000 [ 362.233497] RDX: 0000000000000001 RSI: ffff9ee6ff6167d8 RDI: ffff9ee6ff6167d8 [ 362.241457] RBP: ffff9ee6ff603d78 R08: 0000000000000490 R09: 0000000000000004 [ 362.249416] R10: 0000000000000000 R11: ffff9ee6ff603990 R12: ffff9ee664b94500 [ 362.257377] R13: 0000000000000000 R14: 0000000000000004 R15: ffffffff9de615f9 [ 362.265337] FS: 00007f1d22d28740(0000) GS:ffff9ee6ff600000(0000) knlGS:0000000000000000 [ 362.274363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 362.280773] CR2: 00007f1d222f35d0 CR3: 0000001fddfec003 CR4: 00000000001606f0 [ 362.288733] Call Trace: [ 362.291459] [ 362.293702] ex_handler_refcount+0x4e/0x80 [ 362.298269] fixup_exception+0x35/0x40 [ 362.302451] do_trap+0x109/0x150 [ 362.306048] do_error_trap+0xd5/0x130 [ 362.315766] invalid_op+0x14/0x20 [ 362.319460] RIP: 0010:skb_set_owner_w+0x5e/0xa0 [ 362.324512] Code: ef ff ff 74 49 48 c7 43 60 20 7b 4a 9d 8b 85 f4 01 00 00 85 c0 75 16 8b 83 e0 00 00 00 f0 01 85 44 01 00 00 0f 88 d8 23 16 00 <5b> 5d c3 80 8b 91 00 00 00 01 8b 85 f4 01 00 00 89 83 a4 00 00 00 [ 362.345465] RSP: 0018:ffff9ee6ff603e20 EFLAGS: 00010a86 [ 362.351291] RAX: 0000000000001100 RBX: ffff9ee65deec700 RCX: ffff9ee65e829244 [ 362.359250] RDX: 0000000000000100 RSI: ffff9ee65e829100 RDI: ffff9ee65deec700 [ 362.367210] RBP: ffff9ee65e829100 R08: 000000000002a380 R09: 0000000000000000 [ 362.375169] R10: 0000000000000002 R11: fffff1a4bf77bb00 R12: ffffc0754661d000 [ 362.383130] R13: ffff9ee65deec200 R14: ffff9ee65f597000 R15: 00000000000000aa [ 362.391092] veth_xdp_rcv+0x4e4/0x890 [veth] [ 362.399357] veth_poll+0x4d/0x17a [veth] [ 362.403731] net_rx_action+0x2af/0x3f0 [ 362.407912] __do_softirq+0xdd/0x29e [ 362.411897] do_softirq_own_stack+0x2a/0x40 [ 362.416561] [ 362.418899] do_softirq+0x4b/0x70 [ 362.422594] __local_bh_enable_ip+0x50/0x60 [ 362.427258] ip_finish_output2+0x16a/0x390 [ 362.431824] ip_output+0x71/0xe0 [ 362.440670] __tcp_transmit_skb+0x583/0xab0 [ 362.445333] tcp_write_xmit+0x247/0xfb0 [ 362.449609] __tcp_push_pending_frames+0x2d/0xd0 [ 362.454760] tcp_sendmsg_locked+0x857/0xd30 [ 362.459424] tcp_sendmsg+0x27/0x40 [ 362.463216] sock_sendmsg+0x36/0x50 [ 362.467104] sock_write_iter+0x87/0x100 [ 362.471382] __vfs_write+0x112/0x1a0 [ 362.475369] vfs_write+0xad/0x1a0 [ 362.479062] ksys_write+0x52/0xc0 [ 362.482759] do_syscall_64+0x5b/0x180 [ 362.486841] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 362.492473] RIP: 0033:0x7f1d22293238 [ 362.496458] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 c5 54 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 [ 362.517409] RSP: 002b:00007ffebaef8008 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 362.525855] RAX: ffffffffffffffda RBX: 0000000000002800 RCX: 00007f1d22293238 [ 362.533816] RDX: 0000000000002800 RSI: 00007f1d22d36000 RDI: 0000000000000005 [ 362.541775] RBP: 00007f1d22d36000 R08: 00000002db777a30 R09: 0000562b70712b20 [ 362.549734] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000005 [ 362.557693] R13: 0000000000002800 R14: 00007ffebaef8060 R15: 0000562b70712260 In order to avoid this, orphan the skb before entering GRO. Fixes: 948d4f214fde ("veth: Add driver XDP") Reported-by: Paolo Abeni Signed-off-by: Toshiaki Makita Tested-by: Paolo Abeni Signed-off-by: David S. Miller --- drivers/net/veth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 8d679c8b7f25..41a00cd76955 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -463,6 +463,8 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq, struct sk_buff *skb, int mac_len, delta, off; struct xdp_buff xdp; + skb_orphan(skb); + rcu_read_lock(); xdp_prog = rcu_dereference(rq->xdp_prog); if (unlikely(!xdp_prog)) { @@ -508,8 +510,6 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq, struct sk_buff *skb, skb_copy_header(nskb, skb); head_off = skb_headroom(nskb) - skb_headroom(skb); skb_headers_offset_update(nskb, head_off); - if (skb->sk) - skb_set_owner_w(nskb, skb->sk); consume_skb(skb); skb = nskb; } -- cgit From f025571e96caa95ffc3c1792f762a584893de582 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 14 Sep 2018 11:20:07 +0000 Subject: net: ethernet: ti: add missing GENERIC_ALLOCATOR dependency This patch mades TI_DAVINCI_CPDMA select GENERIC_ALLOCATOR. without that, the following sparc64 build failure happen drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc': (.text+0x278): undefined reference to `gen_pool_avail' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit': (.text+0x340): undefined reference to `gen_pool_alloc' (.text+0x5c4): undefined reference to `gen_pool_free' drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free': davinci_cpdma.c:(.text+0x64c): undefined reference to `gen_pool_free' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.6': davinci_cpdma.c:(.text+0x17ac): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x17b8): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x1824): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x1830): undefined reference to `gen_pool_avail' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create': (.text+0x19f8): undefined reference to `devm_gen_pool_create' (.text+0x1a90): undefined reference to `gen_pool_add_virt' Makefile:1011: recipe for target 'vmlinux' failed Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 9263d638bd6d..f932923f7d56 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -41,6 +41,7 @@ config TI_DAVINCI_MDIO config TI_DAVINCI_CPDMA tristate "TI DaVinci CPDMA Support" depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_ALLOCATOR ---help--- This driver supports TI's DaVinci CPDMA dma engine. -- cgit From 8540827ebac6b654ab2f69c8fbce9e4fbd6304a0 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Fri, 14 Sep 2018 16:28:05 +0200 Subject: pppoe: fix reception of frames with no mac header pppoe_rcv() needs to look back at the Ethernet header in order to lookup the PPPoE session. Therefore we need to ensure that the mac header is big enough to contain an Ethernet header. Otherwise eth_hdr(skb)->h_source might access invalid data. ================================================================== BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline] BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline] BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 __get_item drivers/net/ppp/pppoe.c:172 [inline] get_item drivers/net/ppp/pppoe.c:236 [inline] pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4447c9 RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9 RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004 RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 tun_alloc_skb drivers/net/tun.c:1532 [inline] tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== Fixes: 224cf5ad14c0 ("ppp: Move the PPP drivers") Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index ce61231e96ea..62dc564b251d 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -429,6 +429,9 @@ static int pppoe_rcv(struct sk_buff *skb, struct net_device *dev, if (!skb) goto out; + if (skb_mac_header_len(skb) < ETH_HLEN) + goto drop; + if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) goto drop; -- cgit From 41948ccb4a856dddacfbd4d789d4fa8663fe41bb Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 14 Sep 2018 16:56:35 +0200 Subject: net: mvpp2: let phylink manage the carrier state Net drivers using phylink shouldn't mess with the link carrier themselves and should let phylink manage it. The mvpp2 driver wasn't following this best practice as the mac_config() function made calls to change the link carrier state. This led to wrongly reported carrier link state which then triggered other issues. This patch fixes this behaviour. But the PPv2 driver relied on this misbehaviour in two cases: for fixed links and when not using phylink (ACPI mode). The later was fixed by adding an explicit call to link_up(), which when the ACPI mode will use phylink should be removed. The fixed link case was relying on the mac_config() function to set the link up, as we found an issue in phylink_start() which assumes the carrier is off. If not, the link_up() function is never called. To fix this, a call to netif_carrier_off() is added just before phylink_start() so that we do not introduce a regression in the driver. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Reported-by: Russell King Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 28500417843e..702fec82d806 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -58,6 +58,8 @@ static struct { */ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, const struct phylink_link_state *state); +static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode, + phy_interface_t interface, struct phy_device *phy); /* Queue modes */ #define MVPP2_QDIST_SINGLE_MODE 0 @@ -3142,6 +3144,7 @@ static void mvpp2_start_dev(struct mvpp2_port *port) mvpp22_mode_reconfigure(port); if (port->phylink) { + netif_carrier_off(port->dev); phylink_start(port->phylink); } else { /* Phylink isn't used as of now for ACPI, so the MAC has to be @@ -3150,9 +3153,10 @@ static void mvpp2_start_dev(struct mvpp2_port *port) */ struct phylink_link_state state = { .interface = port->phy_interface, - .link = 1, }; mvpp2_mac_config(port->dev, MLO_AN_INBAND, &state); + mvpp2_mac_link_up(port->dev, MLO_AN_INBAND, port->phy_interface, + NULL); } netif_tx_start_all_queues(port->dev); @@ -4495,10 +4499,6 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, return; } - netif_tx_stop_all_queues(port->dev); - if (!port->has_phy) - netif_carrier_off(port->dev); - /* Make sure the port is disabled when reconfiguring the mode */ mvpp2_port_disable(port); @@ -4523,16 +4523,7 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, if (port->priv->hw_version == MVPP21 && port->flags & MVPP2_F_LOOPBACK) mvpp2_port_loopback_set(port, state); - /* If the port already was up, make sure it's still in the same state */ - if (state->link || !port->has_phy) { - mvpp2_port_enable(port); - - mvpp2_egress_enable(port); - mvpp2_ingress_enable(port); - if (!port->has_phy) - netif_carrier_on(dev); - netif_tx_wake_all_queues(dev); - } + mvpp2_port_enable(port); } static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode, -- cgit From eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 14 Sep 2018 17:48:10 +0200 Subject: net: macb: disable scatter-gather for macb on sama5d3 Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 16e4ef7d7185..f1a86b422617 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3837,6 +3837,13 @@ static const struct macb_config at91sam9260_config = { .init = macb_init, }; +static const struct macb_config sama5d3macb_config = { + .caps = MACB_CAPS_SG_DISABLED + | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct macb_config pc302gem_config = { .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE, .dma_burst_length = 16, @@ -3904,6 +3911,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,gem", .data = &pc302gem_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config }, + { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config }, { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config }, -- cgit From a7f38002fb69b44f8fc622ecb838665d0b8666af Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 14 Sep 2018 17:39:53 +0100 Subject: net: hp100: fix always-true check for link up state The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value that is always non-zero and hence the wait for the link to drop always terminates prematurely. Fix this by using a logical not operator instead of a bitwise complement. This issue has been in the driver since pre-2.6.12-rc2. Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/hp/hp100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c index c8c7ad2eff77..9b5a68b65432 100644 --- a/drivers/net/ethernet/hp/hp100.c +++ b/drivers/net/ethernet/hp/hp100.c @@ -2634,7 +2634,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) /* Wait for link to drop */ time = jiffies + (HZ / 10); do { - if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) + if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) break; if (!in_interrupt()) schedule_timeout_interruptible(1); -- cgit From 28ea334bd1657f3c43485b4a8592672fc6835fac Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Sep 2018 15:41:29 -0400 Subject: bnxt_en: Fix VF mac address regression. The recent commit to always forward the VF MAC address to the PF for approval may not work if the PF driver or the firmware is older. This will cause the VF driver to fail during probe: bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF bnxt_en 0000:00:03.0: Unable to initialize mac address. bnxt_en: probe of 0000:00:03.0 failed with error -99 We fix it by treating the error as fatal only if the VF MAC address is locally generated by the VF. Fixes: 707e7e966026 ("bnxt_en: Always forward VF MAC address to the PF.") Reported-by: Seth Forshee Reported-by: Siwei Liu Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +++++++-- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 9 +++++---- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h | 2 +- 3 files changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index cecbb1d1f587..177587f9c3f1 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8027,7 +8027,7 @@ static int bnxt_change_mac_addr(struct net_device *dev, void *p) if (ether_addr_equal(addr->sa_data, dev->dev_addr)) return 0; - rc = bnxt_approve_mac(bp, addr->sa_data); + rc = bnxt_approve_mac(bp, addr->sa_data, true); if (rc) return rc; @@ -8827,14 +8827,19 @@ static int bnxt_init_mac_addr(struct bnxt *bp) } else { #ifdef CONFIG_BNXT_SRIOV struct bnxt_vf_info *vf = &bp->vf; + bool strict_approval = true; if (is_valid_ether_addr(vf->mac_addr)) { /* overwrite netdev dev_addr with admin VF MAC */ memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN); + /* Older PF driver or firmware may not approve this + * correctly. + */ + strict_approval = false; } else { eth_hw_addr_random(bp->dev); } - rc = bnxt_approve_mac(bp, bp->dev->dev_addr); + rc = bnxt_approve_mac(bp, bp->dev->dev_addr, strict_approval); #endif } return rc; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index fcd085a9853a..3962f6fd543c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -1104,7 +1104,7 @@ update_vf_mac_exit: mutex_unlock(&bp->hwrm_cmd_lock); } -int bnxt_approve_mac(struct bnxt *bp, u8 *mac) +int bnxt_approve_mac(struct bnxt *bp, u8 *mac, bool strict) { struct hwrm_func_vf_cfg_input req = {0}; int rc = 0; @@ -1122,12 +1122,13 @@ int bnxt_approve_mac(struct bnxt *bp, u8 *mac) memcpy(req.dflt_mac_addr, mac, ETH_ALEN); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); mac_done: - if (rc) { + if (rc && strict) { rc = -EADDRNOTAVAIL; netdev_warn(bp->dev, "VF MAC address %pM not approved by the PF\n", mac); + return rc; } - return rc; + return 0; } #else @@ -1144,7 +1145,7 @@ void bnxt_update_vf_mac(struct bnxt *bp) { } -int bnxt_approve_mac(struct bnxt *bp, u8 *mac) +int bnxt_approve_mac(struct bnxt *bp, u8 *mac, bool strict) { return 0; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h index e9b20cd19881..2eed9eda1195 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h @@ -39,5 +39,5 @@ int bnxt_sriov_configure(struct pci_dev *pdev, int num_vfs); void bnxt_sriov_disable(struct bnxt *); void bnxt_hwrm_exec_fwd_req(struct bnxt *); void bnxt_update_vf_mac(struct bnxt *); -int bnxt_approve_mac(struct bnxt *, u8 *); +int bnxt_approve_mac(struct bnxt *, u8 *, bool); #endif -- cgit From 00d7ddba1143623b31bc2c15d18216e2da031b14 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Sep 2018 12:54:57 -0700 Subject: hv_netvsc: pair VF based on serial number Matching network device based on MAC address is problematic since a non VF network device can be creted with a duplicate MAC address causing confusion and problems. The VMBus API does provide a serial number that is a better matching method. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 3 +++ drivers/net/hyperv/netvsc_drv.c | 58 +++++++++++++++++++++++------------------ 2 files changed, 36 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 31c3d77b4733..fe01e141c8f8 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -1203,6 +1203,9 @@ static void netvsc_send_vf(struct net_device *ndev, net_device_ctx->vf_alloc = nvmsg->msg.v4_msg.vf_assoc.allocated; net_device_ctx->vf_serial = nvmsg->msg.v4_msg.vf_assoc.serial; + netdev_info(ndev, "VF slot %u %s\n", + net_device_ctx->vf_serial, + net_device_ctx->vf_alloc ? "added" : "removed"); } static void netvsc_receive_inband(struct net_device *ndev, diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 915fbd66a02b..3af6d8d15233 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -1894,20 +1894,6 @@ out_unlock: rtnl_unlock(); } -static struct net_device *get_netvsc_bymac(const u8 *mac) -{ - struct net_device_context *ndev_ctx; - - list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { - struct net_device *dev = hv_get_drvdata(ndev_ctx->device_ctx); - - if (ether_addr_equal(mac, dev->perm_addr)) - return dev; - } - - return NULL; -} - static struct net_device *get_netvsc_byref(struct net_device *vf_netdev) { struct net_device_context *net_device_ctx; @@ -2036,26 +2022,48 @@ static void netvsc_vf_setup(struct work_struct *w) rtnl_unlock(); } +/* Find netvsc by VMBus serial number. + * The PCI hyperv controller records the serial number as the slot. + */ +static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev) +{ + struct device *parent = vf_netdev->dev.parent; + struct net_device_context *ndev_ctx; + struct pci_dev *pdev; + + if (!parent || !dev_is_pci(parent)) + return NULL; /* not a PCI device */ + + pdev = to_pci_dev(parent); + if (!pdev->slot) { + netdev_notice(vf_netdev, "no PCI slot information\n"); + return NULL; + } + + list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { + if (!ndev_ctx->vf_alloc) + continue; + + if (ndev_ctx->vf_serial == pdev->slot->number) + return hv_get_drvdata(ndev_ctx->device_ctx); + } + + netdev_notice(vf_netdev, + "no netdev found for slot %u\n", pdev->slot->number); + return NULL; +} + static int netvsc_register_vf(struct net_device *vf_netdev) { - struct net_device *ndev; struct net_device_context *net_device_ctx; - struct device *pdev = vf_netdev->dev.parent; struct netvsc_device *netvsc_dev; + struct net_device *ndev; int ret; if (vf_netdev->addr_len != ETH_ALEN) return NOTIFY_DONE; - if (!pdev || !dev_is_pci(pdev) || dev_is_pf(pdev)) - return NOTIFY_DONE; - - /* - * We will use the MAC address to locate the synthetic interface to - * associate with the VF interface. If we don't find a matching - * synthetic interface, move on. - */ - ndev = get_netvsc_bymac(vf_netdev->perm_addr); + ndev = get_netvsc_byslot(vf_netdev); if (!ndev) return NOTIFY_DONE; -- cgit From ddca24dfcf1bec608668dd44c45d49397b70f520 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 14 Sep 2018 23:46:12 +0200 Subject: net: dsa: mv88e6xxx: Fix ATU Miss Violation Fix a cut/paste error and a typo which results in ATU miss violations not being reported. Fixes: 0977644c5005 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global1.h | 2 +- drivers/net/dsa/mv88e6xxx/global1_atu.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h index 7c791c1da4b9..bef01331266f 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.h +++ b/drivers/net/dsa/mv88e6xxx/global1.h @@ -128,7 +128,7 @@ #define MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION 0x7000 #define MV88E6XXX_G1_ATU_OP_AGE_OUT_VIOLATION BIT(7) #define MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION BIT(6) -#define MV88E6XXX_G1_ATU_OP_MISS_VIOLTATION BIT(5) +#define MV88E6XXX_G1_ATU_OP_MISS_VIOLATION BIT(5) #define MV88E6XXX_G1_ATU_OP_FULL_VIOLATION BIT(4) /* Offset 0x0C: ATU Data Register */ diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index 307410898fc9..5200e4bdce93 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -349,7 +349,7 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) chip->ports[entry.portvec].atu_member_violation++; } - if (val & MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION) { + if (val & MV88E6XXX_G1_ATU_OP_MISS_VIOLATION) { dev_err_ratelimited(chip->dev, "ATU miss violation for %pM portvec %x\n", entry.mac, entry.portvec); -- cgit From c73480910e9686a5c25155cb4d418d594b678196 Mon Sep 17 00:00:00 2001 From: zhong jiang Date: Mon, 17 Sep 2018 18:44:19 +0800 Subject: net: ethernet: Fix a unused function warning. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning: drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function] static int lan743x_pm_suspend(struct device *dev) drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function] static int lan743x_pm_resume(struct device *dev) Signed-off-by: zhong jiang Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/lan743x_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index e7dce79ff2c9..001b5f714c1b 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -2850,7 +2850,7 @@ static void lan743x_pcidev_shutdown(struct pci_dev *pdev) lan743x_hardware_cleanup(adapter); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static u16 lan743x_pm_wakeframe_crc16(const u8 *buf, int len) { return bitrev16(crc16(0xFFFF, buf, len)); @@ -3016,7 +3016,7 @@ static int lan743x_pm_resume(struct device *dev) static const struct dev_pm_ops lan743x_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(lan743x_pm_suspend, lan743x_pm_resume) }; -#endif /*CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static const struct pci_device_id lan743x_pcidev_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_SMSC, PCI_DEVICE_ID_SMSC_LAN7430) }, @@ -3028,7 +3028,7 @@ static struct pci_driver lan743x_pcidev_driver = { .id_table = lan743x_pcidev_tbl, .probe = lan743x_pcidev_probe, .remove = lan743x_pcidev_remove, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .driver.pm = &lan743x_pm_ops, #endif .shutdown = lan743x_pcidev_shutdown, -- cgit From 94235460f9eaefc4f0a3a4a6014fb4c6db4241cc Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 12 Sep 2018 14:58:20 +0800 Subject: r8169: Align ASPM/CLKREQ setting function with vendor driver There's a small delay after setting ASPM in vendor drivers, r8101 and r8168. In addition, those drivers enable ASPM before ClkReq, also change that to align with vendor driver. I haven't seen anything bad becasue of this, but I think it's better to keep in sync with vendor driver. Signed-off-by: Kai-Heng Feng Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 1d8631303b53..8195b1f5036d 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4775,12 +4775,14 @@ static void rtl_pcie_state_l2l3_enable(struct rtl8169_private *tp, bool enable) static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable) { if (enable) { - RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn); RTL_W8(tp, Config5, RTL_R8(tp, Config5) | ASPM_en); + RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn); } else { RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn); RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en); } + + udelay(10); } static void rtl_hw_start_8168bb(struct rtl8169_private *tp) -- cgit From 0866cd15029baa3331ba347794053472306e8eb3 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 12 Sep 2018 14:58:21 +0800 Subject: r8169: enable ASPM on RTL8106E The Intel SoC was prevented from entering lower idle state because of RTL8106E's ASPM was not enabled. So enable ASPM on RTL8106E (chip version 39). Now the Intel SoC can enter lower idle state, power consumption and temperature are much lower. Signed-off-by: Kai-Heng Feng Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 8195b1f5036d..b0a803e96634 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5627,6 +5627,8 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp) static void rtl_hw_start_8106(struct rtl8169_private *tp) { + rtl_hw_aspm_clkreq_enable(tp, false); + /* Force LAN exit from ASPM if Rx/Tx are not idle */ RTL_W32(tp, FuncEvent, RTL_R32(tp, FuncEvent) | 0x002800); @@ -5635,6 +5637,7 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp) RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) & ~PFM_EN); rtl_pcie_state_l2l3_enable(tp, false); + rtl_hw_aspm_clkreq_enable(tp, true); } static void rtl_hw_start_8101(struct rtl8169_private *tp) -- cgit From c2f6f3ee7f22521fabc3295f51149bc3f4dd9202 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 12 Sep 2018 11:34:55 +0200 Subject: r8169: Get and enable optional ether_clk clock On some boards a platform clock is used as clock for the r8169 chip, this commit adds support for getting and enabling this clock (assuming it has an "ether_clk" alias set on it). This is related to commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") which is a previous attempt to fix this for some x86 boards, but this causes all Cherry Trail SoC using boards to not reach there lowest power states when suspending. This commit (together with an atom-pmc-clk driver commit adding the alias) fixes things properly by making the r8169 get the clock and enable it when it needs it. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach Cc: Carlo Caione Reported-by: Johannes Stezenbach Acked-by: Stephen Boyd Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index b0a803e96634..bb529ff2ca81 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -665,6 +666,7 @@ struct rtl8169_private { u16 event_slow; const struct rtl_coalesce_info *coalesce_info; + struct clk *clk; struct mdio_ops { void (*write)(struct rtl8169_private *, int, int); @@ -7262,6 +7264,11 @@ static int rtl_jumbo_max(struct rtl8169_private *tp) } } +static void rtl_disable_clk(void *data) +{ + clk_disable_unprepare(data); +} + static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; @@ -7282,6 +7289,32 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT); tp->supports_gmii = cfg->has_gmii; + /* Get the *optional* external "ether_clk" used on some boards */ + tp->clk = devm_clk_get(&pdev->dev, "ether_clk"); + if (IS_ERR(tp->clk)) { + rc = PTR_ERR(tp->clk); + if (rc == -ENOENT) { + /* clk-core allows NULL (for suspend / resume) */ + tp->clk = NULL; + } else if (rc == -EPROBE_DEFER) { + return rc; + } else { + dev_err(&pdev->dev, "failed to get clk: %d\n", rc); + return rc; + } + } else { + rc = clk_prepare_enable(tp->clk); + if (rc) { + dev_err(&pdev->dev, "failed to enable clk: %d\n", rc); + return rc; + } + + rc = devm_add_action_or_reset(&pdev->dev, rtl_disable_clk, + tp->clk); + if (rc) + return rc; + } + /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pcim_enable_device(pdev); if (rc < 0) { -- cgit From 922005c7f50e7f4b2a6dbc182e9c575b4f92396b Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 17 Sep 2018 22:00:24 +0200 Subject: qmi_wwan: set DTR for modems in forced USB2 mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by: Fred Veldini Reported-by: Deshu Wen Signed-off-by: Bjørn Mork Reported-by: Fred Veldini Reported-by: Deshu Wen Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index e3270deecec2..533b6fb8d923 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1213,13 +1213,13 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */ {QMI_FIXED_INTF(0x1199, 0x9063, 8)}, /* Sierra Wireless EM7305 */ {QMI_FIXED_INTF(0x1199, 0x9063, 10)}, /* Sierra Wireless EM7305 */ - {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */ - {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */ - {QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 10)},/* Sierra Wireless MC74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 10)},/* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ -- cgit