From e378f4967c8edd64c680f2e279cb646ee06b6f2d Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 20 Oct 2021 20:33:40 +0300 Subject: net: enetc: make sure all traffic classes can send large frames The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn Signed-off-by: Vladimir Oltean Reviewed-by: Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 4c977dfc44f0..d522bd5c90b4 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -517,10 +517,13 @@ static void enetc_port_si_configure(struct enetc_si *si) static void enetc_configure_port_mac(struct enetc_hw *hw) { + int tc; + enetc_port_wr(hw, ENETC_PM0_MAXFRM, ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE)); - enetc_port_wr(hw, ENETC_PTCMSDUR(0), ENETC_MAC_MAXFRM_SIZE); + for (tc = 0; tc < 8; tc++) + enetc_port_wr(hw, ENETC_PTCMSDUR(tc), ENETC_MAC_MAXFRM_SIZE); enetc_port_wr(hw, ENETC_PM0_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN | ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC); -- cgit