From 8caef1fa9176c4789b74c806434517b3adf7544a Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 9 Oct 2017 15:26:41 +0200 Subject: nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs This adds a driver to access the efuse on Amlogic Meson6, Meson8 and Meson8b SoCs. These SoCs are accessing the efuse IP block directly through the registers in the "secbus" region. This makes it different from the Meson GX efuse driver which uses the "secure monitor" firmware to access the efuse. The efuse on Meson6 can only read one byte at a time, while the efuse on Meson8 and Meson8b always reads 4 bytes at a time. The new driver supports both, but due to lack of hardware Meson6 support was not tested. The hardware also supports writing. However, this is currently not supported by the driver. Signed-off-by: Martin Blumenstingl Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/nvmem/Makefile') diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 4c589184acee..362f394da65d 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -30,5 +30,7 @@ obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o nvmem-vf610-ocotp-y := vf610-ocotp.o obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o nvmem_meson_efuse-y := meson-efuse.o +obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o +nvmem_meson_mx_efuse-y := meson-mx-efuse.o obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o nvmem_snvs_lpgpr-y := snvs_lpgpr.o -- cgit