From f7625980f5820edd1a73536e1a03bcbc1f889fec Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 14 Nov 2013 11:28:18 -0700 Subject: PCI: Fix whitespace, capitalization, and spelling errors Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki --- drivers/pci/hotplug/ibmphp_pci.c | 71 ++++++++++++++++++++-------------------- 1 file changed, 35 insertions(+), 36 deletions(-) (limited to 'drivers/pci/hotplug/ibmphp_pci.c') diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index c60f5f3e838d..639ea3a75e14 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -1,8 +1,8 @@ /* * IBM Hot Plug Controller Driver - * + * * Written By: Irene Zubarev, IBM Corporation - * + * * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2001,2002 IBM Corp. * @@ -42,7 +42,7 @@ static u8 find_sec_number (u8 primary_busno, u8 slotno); /* * NOTE..... If BIOS doesn't provide default routing, we assign: - * 9 for SCSI, 10 for LAN adapters, and 11 for everything else. + * 9 for SCSI, 10 for LAN adapters, and 11 for everything else. * If adapter is bridged, then we assign 11 to it and devices behind it. * We also assign the same irq numbers for multi function devices. * These are PIC mode, so shouldn't matter n.e.ways (hopefully) @@ -71,11 +71,11 @@ static void assign_alt_irq (struct pci_func * cur_func, u8 class_code) * Configures the device to be added (will allocate needed resources if it * can), the device can be a bridge or a regular pci device, can also be * multi-functional - * + * * Input: function to be added - * + * * TO DO: The error case with Multifunction device or multi function bridge, - * if there is an error, will need to go through all previous functions and + * if there is an error, will need to go through all previous functions and * unconfigure....or can add some code into unconfigure_card.... */ int ibmphp_configure_card (struct pci_func *func, u8 slotno) @@ -98,7 +98,7 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) cur_func = func; /* We only get bus and device from IRQ routing table. So at this point, - * func->busno is correct, and func->device contains only device (at the 5 + * func->busno is correct, and func->device contains only device (at the 5 * highest bits) */ @@ -151,7 +151,7 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) cur_func->device, cur_func->busno); cleanup_count = 6; goto error; - } + } cur_func->next = NULL; function = 0x8; break; @@ -339,7 +339,7 @@ error: } /* - * This function configures the pci BARs of a single device. + * This function configures the pci BARs of a single device. * Input: pointer to the pci_func * Output: configured PCI, 0, or error */ @@ -371,17 +371,17 @@ static int configure_device (struct pci_func *func) for (count = 0; address[count]; count++) { /* for 6 BARs */ - /* not sure if i need this. per scott, said maybe need smth like this + /* not sure if i need this. per scott, said maybe need * something like this if devices don't adhere 100% to the spec, so don't want to write to the reserved bits - pcibios_read_config_byte(cur_func->busno, cur_func->device, + pcibios_read_config_byte(cur_func->busno, cur_func->device, PCI_BASE_ADDRESS_0 + 4 * count, &tmp); if (tmp & 0x01) // IO - pcibios_write_config_dword(cur_func->busno, cur_func->device, + pcibios_write_config_dword(cur_func->busno, cur_func->device, PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFD); else // Memory - pcibios_write_config_dword(cur_func->busno, cur_func->device, + pcibios_write_config_dword(cur_func->busno, cur_func->device, PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFF); */ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); @@ -421,8 +421,8 @@ static int configure_device (struct pci_func *func) return -EIO; } pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start); - - /* _______________This is for debugging purposes only_____________________ */ + + /* _______________This is for debugging purposes only_____________________ */ debug ("b4 writing, the IO address is %x\n", func->io[count]->start); pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); debug ("after writing.... the start address is %x\n", bar[count]); @@ -484,7 +484,7 @@ static int configure_device (struct pci_func *func) pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); - /*_______________This is for debugging purposes only______________________________*/ + /*_______________This is for debugging purposes only______________________________*/ debug ("b4 writing, start address is %x\n", func->pfmem[count]->start); pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); debug ("after writing, start address is %x\n", bar[count]); @@ -559,7 +559,7 @@ static int configure_device (struct pci_func *func) /****************************************************************************** * This routine configures a PCI-2-PCI bridge and the functions behind it * Parameters: pci_func - * Returns: + * Returns: ******************************************************************************/ static int configure_bridge (struct pci_func **func_passed, u8 slotno) { @@ -622,7 +622,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) debug ("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno); pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number); - + /* __________________For debugging purposes only __________________________________ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); debug ("sec_number after write/read is %x\n", sec_number); @@ -644,7 +644,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - !!!!!!!!!!!!!!!NEED TO ADD!!! FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!! + !!!!!!!!!!!!!!!NEED TO ADD!!! FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/ @@ -670,7 +670,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) debug ("len[count] in IO = %x\n", len[count]); bus_io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); - + if (!bus_io[count]) { err ("out of system memory\n"); retval = -ENOMEM; @@ -735,7 +735,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) ibmphp_add_pfmem_from_mem (bus_pfmem[count]); func->pfmem[count] = bus_pfmem[count]; } else { - err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n", + err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n", func->busno, func->device, len[count]); kfree (mem_tmp); kfree (bus_pfmem[count]); @@ -805,7 +805,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) debug ("amount_needed->mem = %x\n", amount_needed->mem); debug ("amount_needed->pfmem = %x\n", amount_needed->pfmem); - if (amount_needed->not_correct) { + if (amount_needed->not_correct) { debug ("amount_needed is not correct\n"); for (count = 0; address[count]; count++) { /* for 2 BARs */ @@ -830,7 +830,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) } else { debug ("it wants %x IO behind the bridge\n", amount_needed->io); io = kzalloc(sizeof(*io), GFP_KERNEL); - + if (!io) { err ("out of system memory\n"); retval = -ENOMEM; @@ -959,7 +959,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) if (bus->noIORanges) { pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8); + pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8); /* _______________This is for debugging purposes only ____________________ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp); @@ -980,7 +980,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) if (bus->noMemRanges) { pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16); pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16); - + /* ____________________This is for debugging purposes only ________________________ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp); debug ("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); @@ -1017,7 +1017,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); if ((irq > 0x00) && (irq < 0x05)) pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); - /* + /* pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl); pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY); pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR); @@ -1071,7 +1071,7 @@ error: * This function adds up the amount of resources needed behind the PPB bridge * and passes it to the configure_bridge function * Input: bridge function - * Ouput: amount of resources needed + * Output: amount of resources needed *****************************************************************************/ static struct res_needed *scan_behind_bridge (struct pci_func * func, u8 busno) { @@ -1204,9 +1204,9 @@ static struct res_needed *scan_behind_bridge (struct pci_func * func, u8 busno) return amount; } -/* The following 3 unconfigure_boot_ routines deal with the case when we had the card - * upon bootup in the system, since we don't allocate func to such case, we need to read - * the start addresses from pci config space and then find the corresponding entries in +/* The following 3 unconfigure_boot_ routines deal with the case when we had the card + * upon bootup in the system, since we don't allocate func to such case, we need to read + * the start addresses from pci config space and then find the corresponding entries in * our resource lists. The functions return either 0, -ENODEV, or -1 (general failure) * Change: we also call these functions even if we configured the card ourselves (i.e., not * the bootup case), since it should work same way @@ -1561,8 +1561,8 @@ static int unconfigure_boot_card (struct slot *slot_cur) * unconfiguring the device * TO DO: will probably need to add some code in case there was some resource, * to remove it... this is from when we have errors in the configure_card... - * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!! - * Returns: 0, -1, -ENODEV + * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!! + * Returns: 0, -1, -ENODEV */ int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end) { @@ -1634,7 +1634,7 @@ int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end) * Input: bus and the amount of resources needed (we know we can assign those, * since they've been checked already * Output: bus added to the correct spot - * 0, -1, error + * 0, -1, error */ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno) { @@ -1650,7 +1650,7 @@ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct r err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n"); return -ENODEV; } - + list_add (&bus->bus_list, &cur_bus->bus_list); } if (io) { @@ -1679,7 +1679,7 @@ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct r } if (pfmem) { pfmem_range = kzalloc(sizeof(*pfmem_range), GFP_KERNEL); - if (!pfmem_range) { + if (!pfmem_range) { err ("out of system memory\n"); return -ENOMEM; } @@ -1726,4 +1726,3 @@ static u8 find_sec_number (u8 primary_busno, u8 slotno) return busno; return 0xff; } - -- cgit