From b4f6dcb9d35688392d668c46e834f72c55900b49 Mon Sep 17 00:00:00 2001 From: Bharat Kumar Gogada Date: Wed, 14 Nov 2018 20:17:01 +0530 Subject: PCI: Enable SERR# forwarding for all bridges As per Figure 6-3 in PCIe r4.0, sec 6.2.6, ERR_ messages will be forwarded from the secondary interface to the primary interface, if the SERR# Enable bit in the Bridge Control register is set. It seems clear that an ACPI hotplug parameter method (_HPP or _HPX) that tells us to "enable SERR in the command register" (ACPI v6.2, sec 6.2.8, 6.2.9.1) refers to PCI_COMMAND_SERR, which enables reporting of errors by the function itself. For bridges, we also interpreted that to mean we should enable PCI_BRIDGE_CTL_SERR, which enables *forwarding* of errors by the bridge. But we didn't enable PCI_BRIDGE_CTL_SERR anywhere else, which means we never enabled it for non-ACPI systems or ACPI systems that didn't supply hotplug parameters. That means errors reported below bridges were often never forwarded up to a Root Port where they could be signaled via AER. Enable PCI_BRIDGE_CTL_SERR for all bridges so we can get better error reporting for downstream devices. Signed-off-by: Bharat Kumar Gogada [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers/pci/probe.c') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 257b9f6f2ebb..43e6583417ce 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1856,8 +1856,6 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, hpp->latency_timer); pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); - if (hpp->enable_serr) - pci_bctl |= PCI_BRIDGE_CTL_SERR; if (hpp->enable_perr) pci_bctl |= PCI_BRIDGE_CTL_PARITY; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); @@ -2129,6 +2127,24 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev) #endif } +static void pci_configure_serr(struct pci_dev *dev) +{ + u16 control; + + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + + /* + * A bridge will not forward ERR_ messages coming from an + * endpoint unless SERR# forwarding is enabled. + */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control); + if (!(control & PCI_BRIDGE_CTL_SERR)) { + control |= PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control); + } + } +} + static void pci_configure_device(struct pci_dev *dev) { struct hotplug_params hpp; @@ -2139,6 +2155,7 @@ static void pci_configure_device(struct pci_dev *dev) pci_configure_relaxed_ordering(dev); pci_configure_ltr(dev); pci_configure_eetlp_prefix(dev); + pci_configure_serr(dev); memset(&hpp, 0, sizeof(hpp)); ret = pci_get_hp_params(dev, &hpp); -- cgit